P25Q32SH-SSH-IT from PUYA, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	CS#	input	Chip Select, active low. Enables the SPI interface when driven low; deselects the device and forces SO to high-Z when high.
2	SO/SIO1	bidirectional	Serial data output for 1x I/O (Standard SPI); serves as bidirectional data line SIO1 in Dual/Quad SPI and QPI modes.
3	WP#/SIO2	bidirectional	Write Protect input, active low, in Standard/Dual SPI modes. Reused as bidirectional data line SIO2 in Quad SPI and QPI modes.
4	GND	power_in	Ground reference (0V) for the device.
5	SI/SIO0	bidirectional	Serial data input for 1x I/O (Standard SPI); serves as bidirectional data line SIO0 in Dual/Quad SPI and QPI modes.
6	SCLK	input	Serial interface clock input. Data on SI is latched and data on SO is shifted out on clock edges. Max 120 MHz STR, 66 MHz DTR.
7	HOLD#/RESET#/SIO3	bidirectional	In Standard/Dual SPI, pauses the device without deselecting it (HOLD#) or optionally acts as hardware RESET# based on the HOLD/RST configuration bit. Serves as bidirectional data line SIO3 in Quad SPI and QPI modes.
8	VCC	power_in	Power supply input, 2.3V to 3.6V. Bypass with a 0.1uF decoupling capacitor close to the pin.

Key specifications

Parameter	Value
Manufacturer	PUYA
Package	SOP-8
Category	Memory
Pins	8

Ordering variants

Same part, different packaging or reel option.

P25Q32SH-SSH-IT

CAD (KiCad official)

Symbol: P25Q32SH-SSH-IT
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`p25q32sh-ssh-it.step`	122 KB	You want the bare part, or you mark your own boards.
`p25q32sh-ssh-it-etched.step`	2.9 MB	You want the part with `P25Q32SH-SSH-IT` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 710 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: PUYA datasheet (12 pp, sha256 6fbdc8161ed556ff, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF