NC7WZ04P6X from onsemi, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	A1	input	Inverter 1 logic input. CMOS input with VIH = 0.70VCC (min) at VCC ≥ 2.3 V and 0.65VCC (min) at 1.65-1.95 V; VIL = 0.30*VCC (max) at VCC ≥ 2.3 V. Input leakage ±1 uA. Tolerates up to 5.5 V independent of VCC.
2	GND	power_in	Ground reference (0 V). DC ground current rating ±100 mA absolute maximum.
3	A2	input	Inverter 2 logic input. Same CMOS thresholds as A1 (VIH = 0.70*VCC min for VCC ≥ 2.3 V). 5.5 V input tolerant independent of VCC. Unused inputs must be tied HIGH or LOW; may not float.
4	Y2	output	Inverter 2 logic output (Y2 = /A2). Push-pull CMOS output; guaranteed ±24 mA drive at 3 V VCC and up to ±32 mA at 4.5 V VCC. Output goes to high-impedance when VCC = 0 (power-down high-Z).
5	VCC	power_in	Positive supply voltage, 1.65 V to 5.50 V operating (1.5 V to 5.5 V for data retention). Absolute max 6.5 V. Quiescent ICC ≤ 10 uA over temperature. Bypass with a local decoupling capacitor.
6	Y1	output	Inverter 1 logic output (Y1 = /A1). Push-pull CMOS output; ±24 mA drive at 3 V VCC. VOH ≥ VCC-0.1 V and VOL ≤ 0.1 V under light load (±100 uA).

Key specifications

Parameter	Value
Manufacturer	onsemi
Package	SC-70-6
Category	Logic
Pins	6

Ordering variants

Same part, different packaging or reel option.

NC7WZ04P6X
NC7WZ04P6XL6X
NC7WZ04P6XFHX

CAD (KiCad official)

Symbol: NC7WZ04P6X
Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
3D model: SC-70-6 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`nc7wz04p6x.step`	99 KB	You want the bare part, or you mark your own boards.
`nc7wz04p6x-etched.step`	1.7 MB	You want the part with `NC7WZ04P6X` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 440 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: onsemi datasheet (10 pp, sha256 627605c7cafff073, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF