ME6211C30M5G-N
Public Unreviewedby Ray
MICRONE Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownME6211C30M5G-N
MICRONE · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
ME6211C30M5G-N from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated supply input. Operating range 1.2V to 6.0V (absolute max 6.5V). Bypass with a 1uF ceramic capacitor to VSS close to the pin. |
| 2 | VSS | power_in | Device ground / negative supply reference for VIN, VOUT and CE. |
| 3 | CE | input | Chip Enable (active high). VCEH >= 1.0V turns the regulator on; VCEL <= 0.5V shuts it down (0.1uA typ standby). Must not be left floating; tie to VIN for always-on operation. |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to VSS; do not use as a routing via. |
| 5 | VOUT | power_out | Regulated 3.0V output (ME6211C30). Up to 500mA typ output current; 100mV typ dropout at 100mA. Requires a 1uF ceramic output capacitor to VSS for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
ME6211C30M5G-NME6211C30M5G-NR5ME6211C30M5G-NR4ME6211C30M5G-NU4ME6211C30M5G-NN6ME6211C30M5G-NM3ME6211C30M5G-NPME6211C30M5G-NP1
CAD (KiCad official)
- Symbol:
ME6211C30M5G-N - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
me6211c30m5g-n.step |
85 KB | You want the bare part, or you mark your own boards. |
me6211c30m5g-n-etched.step |
2.4 MB | You want the part with ME6211C30M5G-N already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 594 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (23 pp, sha256
79b119b2ba3e7ca8, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).