ME6211C28M5G-N
Public Unreviewedby Ray
MICRONE Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownME6211C28M5G-N
MICRONE · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
ME6211C28M5G-N from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin. Operating range 2V-6V (absolute max 6.5V). Bypass to VSS with a 1uF ceramic capacitor close to the pin. |
| 2 | VSS | power_in | Ground reference pin (接地引脚). All input, output and CE voltages are referenced to this node. |
| 3 | CE | input | Chip enable (使能端). Drive high (VCEH ≥ 1.0V) to enable the regulator; drive low (VCEL ≤ 0.7V) to shut down (typ. 0.1uA / 1uA max). CE range VSS−0.3V to VIN+0.3V. Must NOT be left floating. |
| 4 | NC | unconnected | No internal connection (空). Leave floating or tie to VSS on the PCB. |
| 5 | VOUT | power_out | Regulated LDO output (电压输出端). Fixed 2.8V ±2% for the C28 option, capable of up to 450-500mA. Requires a 1uF ceramic output capacitor (CL) to VSS for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
ME6211C28M5G-NME6211C28M5G-NCxxM5ME6211C28M5G-NCxxN5ME6211C28M5G-NCxxDFNME6211C28M5G-NAxxM3ME6211C28M5G-NAxxP3
CAD (KiCad official)
- Symbol:
ME6211C28M5G-N - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
me6211c28m5g-n.step |
85 KB | You want the bare part, or you mark your own boards. |
me6211c28m5g-n-etched.step |
2.4 MB | You want the part with ME6211C28M5G-N already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 592 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (12 pp, sha256
1d8126fbc091b114, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).