component

ME6211C18M5G-N

Public Unreviewed

by Ray

MICRONE Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpmicme6211c18m5g-n
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

ME6211C18M5G-N

MICRONE · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

ME6211C18M5G-N from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated input supply. Operating range 1.2 V to 6.0 V, absolute max 6.5 V. Bypass to VSS with a 1 uF ceramic capacitor (CIN) close to the pin.
2 VSS power_in Device ground / negative supply reference for the LDO and the CE input.
3 CE input Chip Enable / ON-OFF control input. VCE ≥ 1.0 V (VCEH) enables the regulator; VCE ≤ 0.5 V (VCEL) shuts the output down (standby ~0.1 uA). Absolute range Vss-0.3 V to VIN+0.3 V. Do not leave floating.
4 NC unconnected No internal connection. Leave floating or tie to VSS on the PCB.
5 VOUT power_out Regulated LDO output. Fixed 1.8 V (C18) ±1%, up to 300 mA typical (IOUTMAX). Requires a 1 uF ceramic load capacitor (CL); low-ESR ceramics supported. Dropout typically 200 mV at 100 mA.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • ME6211C18M5G-N
  • ME6211C18M5G-NR5G-N
  • ME6211C18M5G-NR4G-N
  • ME6211C18M5G-NU4AG-N
  • ME6211C18M5G-NN6AG-N
  • ME6211C18M5G-NPG-N
  • ME6211C18M5G-NM3G-N

CAD (KiCad official)

  • Symbol: ME6211C18M5G-N
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
me6211c18m5g-n.step 85 KB You want the bare part, or you mark your own boards.
me6211c18m5g-n-etched.step 2.3 MB You want the part with ME6211C18M5G-N already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 572 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (23 pp, sha256 23084e9d0d0fd762, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF