component

ME3116AM6G

Public Unreviewed

by Ray

MICRONE DC-DC Converters, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpmicme3116am6g
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

ME3116AM6G

MICRONE · DC-DC Converters · SOT-23-6

ME3116AM6G from MICRONE, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BS passive Bootstrap pin for the internal high-side MOSFET gate drive. Connect a CBOOT capacitor between BS and SW to develop the boosted gate-drive rail above SW.
2 GND power_in Ground return for the device.
3 FB input Feedback input pin. Sets the output voltage via an external resistor divider using VOUT = VFB * (1 + R1/R2), where VFB is 0.8V (typ). Divider resistors are typically chosen in the 100Ω to 10kΩ range.
4 EN input Chip enable / logic on-off input. Tie to GND to shut the chip down; drive high to enable. If unused, connect via a 1MΩ resistor between EN and VIN.
5 IN power_in Power supply input. Operating input range 4.75V-40V (absolute max 45V). Decouple close to the pin with a Cin capacitor.
6 SW power_out Switching node / power output of the internal high-side MOSFET. Connect to the external inductor, freewheeling diode (asynchronous rectification), and the CBOOT capacitor. Absolute max -1V to 45V.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • ME3116AM6G

CAD (KiCad official)

  • Symbol: ME3116AM6G
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
me3116am6g.step 97 KB You want the bare part, or you mark your own boards.
me3116am6g-etched.step 1.8 MB You want the part with ME3116AM6G already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 463 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (12 pp, sha256 85b16b886c2758b1, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF