MCP6002T-E from Microchip, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VOUTA	output	Output of op amp A. Rail-to-rail swing (VSS+25 mV to VDD-25 mV typical). Short-circuit current ±6 mA at VDD=1.8V, ±23 mA at VDD=5.5V.
2	VINA-	input	Inverting input of op amp A. Common-mode input range VSS-0.3 V to VDD+0.3 V (rail-to-rail input). Very high input impedance (~10^13 Ω
3	VINA+	input	Non-inverting input of op amp A. Common-mode input range VSS-0.3 V to VDD+0.3 V. Input bias current ±1 pA typical at 25 °C.
4	VSS	power_in	Negative supply rail (typically GND in single-supply designs). VDD-VSS must not exceed 7.0 V absolute maximum; recommended operating range 1.8 V to 6.0 V.
5	VINB+	input	Non-inverting input of op amp B. Common-mode input range VSS-0.3 V to VDD+0.3 V. Input bias current ±1 pA typical at 25 °C.
6	VINB-	input	Inverting input of op amp B. Common-mode input range VSS-0.3 V to VDD+0.3 V. Very high input impedance (~10^13 Ω
7	VOUTB	output	Output of op amp B. Rail-to-rail swing (VSS+25 mV to VDD-25 mV typical). Short-circuit current ±6 mA at VDD=1.8V, ±23 mA at VDD=5.5V.
8	VDD	power_in	Positive supply rail. Recommended 1.8 V to 6.0 V (screened for 6.0 V operation on parts dated Nov-2007 and later). Total quiescent current 200 µA typical (100 µA per amplifier). Bypass with 100 nF close to the pin.

Key specifications

Parameter	Value
Manufacturer	Microchip
Package	SOIC-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

MCP6002T-ESN
MCP6002T-EP
MCP6002T-EMS
MCP6002T-EMNY

CAD (KiCad official)

Symbol: MCP6002T-E
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`mcp6002t-e.step`	122 KB	You want the bare part, or you mark your own boards.
`mcp6002t-e-etched.step`	2.0 MB	You want the part with `MCP6002T-E` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 501 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Microchip datasheet (50 pp, sha256 a9b33cface59f4cd, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF