MCP6002-I from Microchip, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VOUTA	output	Output of op amp A. Rail-to-rail CMOS output stage; typical short-circuit current +/-23 mA at VDD=5.5V.
2	VINA-	input	Inverting input of op amp A. High-impedance CMOS input (Zin ~1e13 ohm
3	VINA+	input	Non-inverting input of op amp A. High-impedance CMOS input with rail-to-rail input range VSS-0.3V to VDD+0.3V; typical input bias current ~1 pA at 25 degC.
4	VSS	power_in	Negative supply / ground reference for both op amps. Typically tied to 0V; VDD-VSS must be between 1.8V and 6.0V (7.0V absolute max).
5	VINB+	input	Non-inverting input of op amp B. High-impedance CMOS input with rail-to-rail input range VSS-0.3V to VDD+0.3V.
6	VINB-	input	Inverting input of op amp B. High-impedance CMOS input (Zin ~1e13 ohm
7	VOUTB	output	Output of op amp B. Rail-to-rail CMOS output stage; short-circuit current continuously limited (typical +/-23 mA at VDD=5.5V).
8	VDD	power_in	Positive supply for both op amps. 1.8V to 6.0V operating range. Recommended local bypass: 0.01-0.1 uF within 2 mm plus a 1 uF (or larger) bulk cap within 100 mm.

Key specifications

Parameter	Value
Manufacturer	Microchip
Package	SOIC-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

MCP6002-II/SN
MCP6002-II/P
MCP6002-II/MS
MCP6002-II/MNY

CAD (KiCad official)

Symbol: MCP6002-I
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`mcp6002-i.step`	122 KB	You want the bare part, or you mark your own boards.
`mcp6002-i-etched.step`	2.0 MB	You want the part with `MCP6002-I` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 482 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Microchip datasheet (50 pp, sha256 a9b33cface59f4cd, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF