MCP6001T-I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VOUT	output	Op amp analog output. Rail-to-rail output swing to within ~25 mV of the supply rails at VDD = 5.5 V; short-circuit current ±23 mA typ at 5.5 V.
2	VSS	power_in	Negative supply / ground reference. Typically connected to 0 V; supply span VDD-VSS must be 1.8 V to 6.0 V (7.0 V absolute max).
3	VIN+	input	Non-inverting analog input. Rail-to-rail common-mode input range from VSS − 0.3 V to VDD + 0.3 V; input bias current ±1 pA typ at 25 °C.
4	VIN-	input	Inverting analog input. Same common-mode range and bias characteristics as VIN+. Analog input current must be limited to ±2 mA.
5	VDD	power_in	Positive supply. 1.8 V to 6.0 V operating range (7.0 V absolute max relative to VSS). Quiescent current 100 µA typ per amplifier.

Key specifications

Parameter	Value
Manufacturer	Microchip Tech
Package	SOT-23-5
Category	Op-amp/Cmp
Pins	5

Ordering variants

Same part, different packaging or reel option.

MCP6001T-I/OT
MCP6001-I/OT
MCP6001T-I/LT
MCP6001-I/LT
MCP6001RT-I/OT
MCP6001UT-I/OT

CAD (KiCad official)

Symbol: MCP6001T-I
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`mcp6001t-i.step`	85 KB	You want the bare part, or you mark your own boards.
`mcp6001t-i-etched.step`	1.7 MB	You want the part with `MCP6001T-I` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 431 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Microchip Tech datasheet (50 pp, sha256 a9b33cface59f4cd, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF