MCP2562T-E from Microchip, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	TXD	input	Transmit Data Input from the CAN controller. Drives CANH/CANL differential outputs: TXD low = Dominant state, TXD high = Recessive. Internal pull-up (nominal 33 kΩ) to VIO on the MCP2562.
2	VSS	power_in	Ground supply pin. Common reference for VDD (4.5-5.5V) and VIO (1.8-5.5V) supplies.
3	VDD	power_in	Positive supply voltage (4.5V to 5.5V). Supplies the transmitter and receiver, including the wake-up receiver. POR/UVLO monitored (VPORH ~3.8-4.3V).
4	RXD	output	Receive Data Output. CMOS output reflecting the CAN bus differential state: High = Recessive, Low = Dominant. Supplied from VIO on the MCP2562 (allows direct connection to low-voltage MCU I/O).
5	VIO	power_in	Digital I/O supply pin (1.8V to 5.5V) - MCP2562 only. Powers the TXD, RXD, and STBY pin circuitry so they interface directly to a low-voltage microcontroller without external level shifters. Requires 0.1 µF decoupling.
6	CANL	bidirectional	CAN Low-level bus I/O. Drives the low side of the CAN differential bus and is tied internally to the receive comparator. Withstands -58V to +58V DC and -150V/+100V ISO-7637 transients; disconnects (high-Z) when the device is unpowered.
7	CANH	bidirectional	CAN High-level bus I/O. Drives the high side of the CAN differential bus and is tied internally to the receive comparator. Withstands -58V to +58V DC and -150V/+100V ISO-7637 transients; disconnects (high-Z) when the device is unpowered.
8	STBY	input	Standby mode input. Low = Normal mode (transmitter and high-speed receiver active); High = Standby (transmitter and high-speed receiver off, only low-power wake-up receiver active). Internal MOS pull-up to VIO (typ 660 kΩ @ 5V, 1.1 MΩ @ 3.3V, 4.4 MΩ @ 1.8V).

Key specifications

Parameter	Value
Manufacturer	Microchip
Package	SOIC-8
Category	Interface
Pins	8

Ordering variants

Same part, different packaging or reel option.

MCP2562T-EE/SN
MCP2562T-E/SN
MCP2562T-EE/P
MCP2562T-EE/MF
MCP2562T-E/MF

CAD (KiCad official)

Symbol: MCP2562T-E
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`mcp2562t-e.step`	122 KB	You want the bare part, or you mark your own boards.
`mcp2562t-e-etched.step`	1.9 MB	You want the part with `MCP2562T-E` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 483 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Microchip datasheet (30 pp, sha256 c36b24e45446d8a1, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF