LP2980IM5-ADJ from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VIN	power_in	Input voltage supply pin. Operating range 2.5 V to 16 V (survival -0.3 V to 16 V). A 1 uF input capacitor is recommended for stability.
2	GND	power_in	Common ground reference (device substrate). Ground pin current is typically 320 uA at 50 mA load and 80 uA at 1 mA load.
3	ON/OFF	input	Active-high enable input. VIH >= 1.4 V (typ) enables the regulator; VIL <= 0.55 V (typ) puts the device into shutdown (<1 uA quiescent). Must be actively terminated; tie to VIN if the shutdown function is not used.
4	ADJ	input	Output voltage feedback / adjust pin. Internal 1.23 V reference; connect a resistor divider from VOUT to ADJ to GND to set VOUT = 1.23 * (1 + R1/R2). ADJ pin bias current typically 150 nA.
5	VOUT	power_out	Regulated output voltage. Adjustable from 1.23 V to 15 V, 50 mA continuous (150 mA typical peak), short-circuit protected. Requires a minimum 2.2 uF output capacitor for stability.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOT-23-5
Category	PMIC
Pins	5

Ordering variants

Same part, different packaging or reel option.

LP2980IM5-ADJ

CAD (KiCad official)

Symbol: LP2980IM5-ADJ
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`lp2980im5-adj.step`	85 KB	You want the bare part, or you mark your own boards.
`lp2980im5-adj-etched.step`	2.3 MB	You want the part with `LP2980IM5-ADJ` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 561 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (17 pp, sha256 7e32119f85ce068f, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF