LMV602MAX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUTA	output	Output of channel A op-amp. Rail-to-rail output stage capable of driving small loads over a 2.7 V to 5.5 V supply range.
2	-INA	input	Inverting input of channel A op-amp. High-impedance CMOS input; typical input bias current 20 fA.
3	+INA	input	Noninverting input of channel A op-amp. High-impedance CMOS input; typical input bias current 20 fA.
4	V-	power_in	Negative (lowest) power supply. Typically tied to GND for single-supply operation. Total supply (V+)−(V−) rated 2.7 V to 5.5 V (abs max 6 V).
5	+INB	input	Noninverting input of channel B op-amp. High-impedance CMOS input; typical input bias current 20 fA.
6	-INB	input	Inverting input of channel B op-amp. High-impedance CMOS input; typical input bias current 20 fA.
7	OUTB	output	Output of channel B op-amp. Rail-to-rail output stage capable of driving small loads over a 2.7 V to 5.5 V supply range.
8	V+	power_in	Positive (highest) power supply. Recommended operating range 2.7 V to 5.5 V referenced to V−; absolute maximum (V+)−(V−) is 6 V.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOIC-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

LMV602MAX
LMV602MAXMM
LMV602MAXMMX

CAD (KiCad official)

Symbol: LMV602MAX
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`lmv602max.step`	122 KB	You want the bare part, or you mark your own boards.
`lmv602max-etched.step`	1.7 MB	You want the part with `LMV602MAX` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 428 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (39 pp, sha256 a1bdac8a50faedf0, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF