LMV358IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	1OUT	output	Output of amplifier 1. Rail-to-rail output; typical swing within ~10 mV of the rails with a 10 kΩ load at VCC = 5 V.
2	1IN-	input	Inverting input of amplifier 1. High-impedance CMOS input; input bias current ~15 nA typical.
3	1IN+	input	Noninverting input of amplifier 1. Common-mode input range extends from GND (−0.2 V) to VCC − 1.0 V (approx.) with CMRR ≥ 50 dB.
4	GND	power_in	Negative supply / ground reference for the device. In single-supply operation, tie to system ground.
5	2IN+	input	Noninverting input of amplifier 2. Same input characteristics as 1IN+.
6	2IN-	input	Inverting input of amplifier 2. Same input characteristics as 1IN-.
7	2OUT	output	Output of amplifier 2. Rail-to-rail swing, capable of ~60 mA short-circuit source and ~160 mA sink (typical) at VCC = 5 V.
8	VCC+	power_in	Positive supply rail. Recommended operating range 2.7 V to 5.5 V (absolute maximum 5.5 V). Bypass to GND with a 0.1 µF ceramic close to the pin.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	VSSOP-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

LMV358IDGKR
LMV358IDGKT
LMV358IDGKRD
LMV358IDGKRDDU
LMV358IDGKRPW

CAD (KiCad official)

Symbol: LMV358IDGKR
Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
3D model: VSSOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`lmv358idgkr.step`	122 KB	You want the bare part, or you mark your own boards.
`lmv358idgkr-etched.step`	2.2 MB	You want the part with `LMV358IDGKR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 552 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (47 pp, sha256 30ed556c94f89b17, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF