LM293ADR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	1OUT	output	Open-collector output of comparator 1. Requires an external pull-up resistor to VCC. Can sink up to 16 mA typical.
2	2OUT	output	Open-collector output of comparator 2. Requires an external pull-up resistor to VCC. Can sink up to 16 mA typical.
3	VCC	power_in	Positive supply voltage. Single supply operation 2 V to 36 V, or dual supply ±1 V to ±18 V.
4	2IN-	input	Inverting input of comparator 2. Common-mode input voltage range extends to ground (VCC-).
5	2IN+	input	Non-inverting input of comparator 2. Common-mode input voltage range extends to ground (VCC-).
6	1IN-	input	Inverting input of comparator 1. Common-mode input voltage range extends to ground (VCC-).
7	1IN+	input	Non-inverting input of comparator 1. Common-mode input voltage range extends to ground (VCC-).
8	GND	power_in	Ground / negative supply pin (VCC-). Connect to 0 V for single-supply operation or to the negative rail for dual-supply operation.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOIC-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

LM293ADR
LM293ADRD

CAD (KiCad official)

Symbol: LM293ADR
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`lm293adr.step`	122 KB	You want the bare part, or you mark your own boards.
`lm293adr-etched.step`	1.8 MB	You want the part with `LM293ADR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 443 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (56 pp, sha256 24c6b3c03dd65dfd, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF