LM2902PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	1OUT	output	Output of op-amp 1. Class-AB output stage; output short-circuit to ground is unlimited at TA = 25°C, VCC <= 15V.
2	1IN-	input	Inverting (negative) input of op-amp 1. Common-mode input range includes V- (ground); low input bias current (typ 20nA).
3	1IN+	input	Non-inverting (positive) input of op-amp 1. Common-mode input range includes V- (ground).
4	VCC+	power_in	Positive (highest) supply rail. LM2902: 3V to 26V (absolute max 26V). Shared across all four amplifiers.
5	2IN+	input	Non-inverting (positive) input of op-amp 2. Common-mode input range includes V- (ground).
6	2IN-	input	Inverting (negative) input of op-amp 2.
7	2OUT	output	Output of op-amp 2.
8	3OUT	output	Output of op-amp 3.
9	3IN-	input	Inverting (negative) input of op-amp 3.
10	3IN+	input	Non-inverting (positive) input of op-amp 3.
11	VCC-	power_in	Negative (lowest) supply rail, or ground for single-supply operation. Common-mode input range includes this rail.
12	4IN+	input	Non-inverting (positive) input of op-amp 4.
13	4IN-	input	Inverting (negative) input of op-amp 4.
14	4OUT	output	Output of op-amp 4.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	TSSOP-14
Category	Op-amp/Cmp
Pins	14

Ordering variants

Same part, different packaging or reel option.

LM2902PWR
LM2902PWRD
LM2902PWRDR
LM2902PWRN
LM2902PWRNS
LM2902PWRDB
LM2902PWRRTE

CAD (KiCad official)

Symbol: LM2902PWR
Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
3D model: TSSOP-14 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`lm2902pwr.step`	194 KB	You want the bare part, or you mark your own boards.
`lm2902pwr-etched.step`	2.3 MB	You want the part with `LM2902PWR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 567 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (65 pp, sha256 a4eda7c3a0236e96, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF