component

lm2675mx-5-0-tp

Public Made by Adom

by adom

TECH PUBLIC LM2675MX 5 0 TP DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpmiclm2675mx-5.0-tp
Overview Files Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Contents

README

markdown

LM2675MX-5.0-TP

TECH PUBLIC LM2675MX 5 0 TP · DC-DC Converters · SOP-8

LM2675MX-5.0-TP from TECH PUBLIC LM2675MX 5 0 TP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected. Leave floating or tie as convenient for layout.
2 NC unconnected Not connected. Leave floating or tie as convenient for layout.
3 NC unconnected Not connected. Leave floating or tie as convenient for layout.
4 FB input Feedback input. Senses the regulated output voltage to complete the internal feedback loop. For the fixed 5.0 V version connect directly to the regulated 5 V output node.
5 ON/OFF input Active-low shutdown input (TTL-compatible). Logic low enables the regulator; logic high shuts down the switching regulator and puts it into low-power standby (typ. 50 µA quiescent).
6 GND power_in Circuit ground reference for the IC and its external components.
7 VIN power_in Positive input supply for the switching regulator, up to 40 V. Requires a low-ESR input bypass capacitor placed close to this pin to supply switching currents and suppress voltage transients.
8 SW power_out Internal power-switch output. Voltage at this node swings between (+VIN − VSAT) and approximately −0.5 V at 300 kHz. Connect to the external catch diode / inductor node. Keep the copper area on this net small to minimize EMI coupling.

Key specifications

Parameter Value
Manufacturer TECH PUBLIC LM2675MX 5 0 TP
Package SOP-8
Category PMIC
Pins 8

Ordering variants

  • LM2675MX-5.0-TP

CAD (KiCad official)

  • Symbol: LM2675MX-5.0-TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm2675mx-5-0-tp-etched.step / lm2675mx-5-0-tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2675mx-5-0-tp.step / lm2675mx-5-0-tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TECH PUBLIC LM2675MX 5 0 TP datasheet (None pp, sha256 d305a960a95531f9, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF