component

INA293A4IDBVR

Public Unreviewed

by Ray

Texas Instruments Current-Sensing Amplifiers, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentop-amp-cmpina293a4idbvr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

INA293A4IDBVR

Texas Instruments · Current-Sensing Amplifiers · SOT-23-5

INA293A4IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Analog output voltage. Buffered output equal to (VIN+ - VIN-) x Gain (200 V/V for the A4 variant). Swings from GND+0.005 V to Vs-0.07 V into a 10kΩ load.
2 GND power_in Device ground reference.
3 IN+ input Shunt resistor positive sense input. Connect to the high-side terminal of the external current-sense (shunt) resistor. Common-mode range -4 V to +110 V. Input bias current ~20 µA typical.
4 IN- input Shunt resistor negative sense input. Connect to the low-side terminal of the external current-sense (shunt) resistor. Common-mode range -4 V to +110 V. Input bias current ~20 µA typical.
5 Vs power_in Power supply, 2.7 V to 20 V (absolute max 22 V). Quiescent current 1.5 mA typical.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • INA293A4IDBVR
  • INA293A4IDBVT
  • INA293B1IDBVR
  • INA293B2IDBVR
  • INA293B3IDBVR
  • INA293B4IDBVR
  • INA293B5IDBVR

CAD (KiCad official)

  • Symbol: INA293A4IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ina293a4idbvr.step 85 KB You want the bare part, or you mark your own boards.
ina293a4idbvr-etched.step 2.1 MB You want the part with INA293A4IDBVR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 546 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 e5be5fa95053bc56, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF