H7233-1M5R
Public Unreviewedby Ray
Shanghai Siproin Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownH7233-1M5R
Shanghai Siproin Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
H7233-1M5R from Shanghai Siproin Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input. Operating range 3.5 V to 15 V (absolute max 18 V). Decouple with a 1 µF input capacitor to GND close to the pin. |
| 2 | GND | power_in | Ground / common return (Vss). Connect to system ground. |
| 3 | CE | input | Chip enable input, active high. Drive high to enable the regulator; typically pulled up through ~10 kΩ per the application circuit. Available only on the SOT-23-5 variant. |
| 4 | NC | unconnected | Not connected. Leave floating or tie to a copper island; no internal connection on the SOT-23-5 package. |
| 5 | VOUT | power_out | Regulated 3.3 V output (±2% accuracy), rated for >400 mA. Decouple with a 1 µF output capacitor to GND close to the pin for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
H7233-1M5RH7233-1M5R1M5GH7233-1M5RH72XX-1M5XH7233-1M5R1PXH7233-1M5R1PRH7233-1M5R1PGH7233-1M5R1MXH7233-1M5R1MRH7233-1M5R1MG
CAD (KiCad official)
- Symbol:
H7233-1M5R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
h7233-1m5r.step |
85 KB | You want the bare part, or you mark your own boards. |
h7233-1m5r-etched.step |
1.8 MB | You want the part with H7233-1M5R already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 449 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Siproin Microelectronics datasheet (11 pp, sha256
a21c635cc1616868, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).