FT24C02A-KSR-T from FMD Fremont Micro Devices, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	A0	input	Device address input bit 0 (chip-select). Hardwired to VIH or VIL to set the 3-bit I2C slave sub-address (bits 5-7 of the 1010xxx device address). Internally recognized as VIL if left unconnected.
2	A1	input	Device address input bit 1 (chip-select). Hardwired to VIH or VIL. Internally recognized as VIL if left unconnected.
3	A2	input	Device address input bit 2 (chip-select). Hardwired to VIH or VIL. Internally recognized as VIL if left unconnected.
4	GND	power_in	Ground reference (0 V) for the device.
5	SDA	bidirectional	I2C serial data line. Bidirectional, open-drain output; requires an external pull-up resistor to VCC. Can be wire-OR'd with other open-drain devices on the bus.
6	SCL	input	I2C serial clock input. Rising edge latches data into the EEPROM; falling edge clocks data out. Schmitt-triggered, filtered for noise immunity. Up to 1 MHz at 2.5-5V, 400 kHz at 1.8V.
7	WP	input	Write Protect input. When tied to VIH or VCC, all programming (write) operations to the EEPROM array are inhibited; when tied to VIL or left unconnected, writes are enabled. Read operations are unaffected.
8	VCC	power_in	Positive supply input. Operating range 1.8V to 5.5V. Read/write typ <2 mA; standby <1 uA (typ 0.02 uA @1.8V, 0.06 uA @5.5V).

Key specifications

Parameter	Value
Manufacturer	FMD Fremont Micro Devices
Package	SOP-8
Category	Memory
Pins	8

Ordering variants

Same part, different packaging or reel option.

FT24C02A-KSR-B
FT24C02A-KSR-T
FT24C02A-KSR-TKSG-B
FT24C02A-KSR-TKSG-T
FT24C02A-KSR-TKDR-B
FT24C02A-KSR-TKDG-B
FT24C02A-KSR-TKMR-B
FT24C02A-KSR-TKMR-T
FT24C02A-KSR-TKMG-B
FT24C02A-KSR-TKMG-T
FT24C02A-KSR-TKTR-B
FT24C02A-KSR-TKTR-T
FT24C02A-KSR-TKTG-B
FT24C02A-KSR-TKTG-T
FT24C02A-KSR-TKNR-T
FT24C02A-KSR-TKNG-T
FT24C02A-KSR-TKLR-T
FT24C02A-KSR-TKLG-T
FT24C02A-KSR-TKPR-T
FT24C02A-KSR-TKPG-T

CAD (KiCad official)

Symbol: FT24C02A-KSR-T
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`ft24c02a-ksr-t.step`	122 KB	You want the bare part, or you mark your own boards.
`ft24c02a-ksr-t-etched.step`	2.3 MB	You want the part with `FT24C02A-KSR-T` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 592 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: FMD Fremont Micro Devices datasheet (20 pp, sha256 f7d42d5522251805, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF