component
cd4052be
Public Unreviewedby Ray
HGSEMI Analog Switches, Multiplexers, DIP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
README
markdownCD4052BE
HGSEMI · Analog Switches, Multiplexers · DIP-16
CD4052BE from HGSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Y0 | passive | Y-side channel 0 analog I/O. Bidirectional analog switch terminal connected to COMY when A=0,B=0 and INH=0. Typical RON=60Ω at VDD-VEE=15V. |
| 2 | Y2 | passive | Y-side channel 2 analog I/O. Bidirectional analog switch terminal connected to COMY when A=0,B=1 and INH=0. |
| 3 | COMY | passive | Y-side common (pole) of the SP4T analog switch. Connected to Y0/Y1/Y2/Y3 according to the address inputs A,B when INH=0. |
| 4 | Y3 | passive | Y-side channel 3 analog I/O. Bidirectional analog switch terminal connected to COMY when A=1,B=1 and INH=0. |
| 5 | Y1 | passive | Y-side channel 1 analog I/O. Bidirectional analog switch terminal connected to COMY when A=1,B=0 and INH=0. |
| 6 | INH | input | Active-high inhibit (enable) digital input. INH=1 disables all channels (all switches OFF); INH=0 enables the channel selected by A,B. Logic thresholds: VIH≈0.7·VDD, VIL≈0.3·VDD. |
| 7 | VEE | power_in | Analog negative supply. Sets the negative excursion for analog signals routed through the switches. VDD-VEE ≤ 18V absolute max (15V recommended). Typically tied to VSS for single-supply digital-level analog switching. |
| 8 | VSS | power_in | Digital ground / negative logic supply (0V reference for control inputs A, B, INH). VDD-VSS operating range 3V-15V. |
| 9 | B | input | Binary address input B (MSB of the 2-bit channel select). Together with A selects one of four channels (X0/Y0..X3/Y3) when INH=0. |
| 10 | A | input | Binary address input A (LSB of the 2-bit channel select). Together with B selects one of four channels (X0/Y0..X3/Y3) when INH=0. |
| 11 | X3 | passive | X-side channel 3 analog I/O. Bidirectional analog switch terminal connected to COMX when A=1,B=1 and INH=0. |
| 12 | X0 | passive | X-side channel 0 analog I/O. Bidirectional analog switch terminal connected to COMX when A=0,B=0 and INH=0. |
| 13 | COMX | passive | X-side common (pole) of the SP4T analog switch. Connected to X0/X1/X2/X3 according to the address inputs A,B when INH=0. |
| 14 | X1 | passive | X-side channel 1 analog I/O. Bidirectional analog switch terminal connected to COMX when A=1,B=0 and INH=0. |
| 15 | X2 | passive | X-side channel 2 analog I/O. Bidirectional analog switch terminal connected to COMX when A=0,B=1 and INH=0. |
| 16 | VDD | power_in | Positive digital/analog supply. Operating range 3V-15V (VDD-VSS), absolute max 18V. Sets logic-input thresholds and the positive analog signal limit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-16 |
| Category | Interface |
| Pins | 16 |
Ordering variants
CD4052BEECD4052BENCD4052BEM/TRCD4052BEMT/TRCD4052BEMS/TRCD4052BELQ/TR
CAD (KiCad official)
- Symbol:
CD4052BE - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: DIP-16 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (None pp, sha256
1ca4ab36c8479262, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).