BRCL3160MF
Public Unreviewedby Ray
Foshan Blue Rocket Elec Battery Management, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownBRCL3160MF
Foshan Blue Rocket Elec · Battery Management · SOT-23-6
BRCL3160MF from Foshan Blue Rocket Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No electrical connection. Leave floating on the PCB. |
| 2 | VM | input | Negative-terminal-of-charger sense pin. The internal power MOSFET (charge/discharge FET) connects this terminal to GND when the protection is not tripped. Used for charger detection, overcurrent and load-short sensing (V_VM abs max −6.0 V to +10 V). |
| 3 | NC | unconnected | No electrical connection. Leave floating on the PCB. |
| 4 | VT | unconnected | Listed as 'VT' in the pin table with 'No electrical connection'. The package pin-out diagram on the same page labels this pin as NC. Recommended: leave floating. |
| 5 | VDD | power_in | Power supply pin. Connect to the positive terminal of the Li-ion/Li-polymer cell, typically through a 100 Ω series resistor with a 0.1 µF bypass capacitor to GND. V_IN abs max −0.3 V to +6.0 V; normal operation 2.0-4.4 V range referenced by detection thresholds. |
| 6 | GND | power_in | Ground reference. Connect the negative terminal of the battery to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Foshan Blue Rocket Elec |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
BRCL3160MF
CAD (KiCad official)
- Symbol:
BRCL3160MF - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
brcl3160mf.step |
97 KB | You want the bare part, or you mark your own boards. |
brcl3160mf-etched.step |
2.1 MB | You want the part with BRCL3160MF already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 501 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Foshan Blue Rocket Elec datasheet (12 pp, sha256
8adfa4c86b03ea70, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).