component
BNO055
Public Unreviewedby adom
Bosch Sensortec Attitude Sensor/Gyroscope, LGA-28(3.8x5.2). Datasheet-verified pinout, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
12 files changed
+6644−9
README.md+60−2@@ -1,5 +1,63 @@ # BNO055 -9-axis absolute orientation sensor with fusion, LGA-28+**Bosch Sensortec** · Attitude Sensor/Gyroscope · LGA-28(3.8x5.2) -The BNO055 is a 9-axis absolute orientation sensor from Bosch with built-in sensor fusion. Combines accelerometer, gyroscope, and magnetometer with a Cortex-M0 processor for ready-to-use orientation data.+BNO055 from Bosch Sensortec, in a LGA-28(3.8x5.2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PIN1 | unconnected | Reserved / do not connect. Leave floating on PCB. |+| 2 | GND | power_in | Analog / core ground reference for the VDD supply domain. |+| 3 | VDD | power_in | Main analog/core supply. Operating range 2.4 V to 3.6 V; decouple with 100 nF close to the pin. |+| 4 | nBOOT_LOAD_PIN | input | Bootloader mode select, active low. Pull low during reset/power-on to enter the internal bootloader; leave high (typ. 10 kΩ pull-up) for normal firmware execution. |+| 5 | PS1 | input | Protocol select bit 1. Combined with PS0 chooses the host interface: I2C standard (PS1=GNDIO, PS0=GNDIO), UART (PS1=VDDIO, PS0=GNDIO), or HID-I2C (PS1=GNDIO, PS0=VDDIO). |+| 6 | PS0 | input | Protocol select bit 0. Combined with PS1 to choose I2C, UART, or HID-I2C interface mode. |+| 7 | PIN7 | unconnected | Reserved / do not connect. |+| 8 | PIN8 | unconnected | Reserved / do not connect. |+| 9 | CAP | passive | Internal LDO decoupling node. Connect a 6.8 nF external capacitor to GND as shown in the connection diagram. |+| 10 | BL_IND | output | Boot loader indicator digital output. Signals bootloader activity; may be left unconnected (DNC in normal operation). |+| 11 | nRESET | input | Chip reset input, active low. Pulling low for at least 20 ns triggers a hardware reset. Typically pulled to VDDIO in normal operation. |+| 12 | PIN12 | unconnected | Reserved / do not connect. |+| 13 | PIN13 | unconnected | Reserved / do not connect. |+| 14 | INT | output | Interrupt output. Driven high on any enabled interrupt condition and latched until cleared by the host via the INT_STA register. |+| 15 | PIN15 | power_in | Connect to GNDIO (digital I/O ground). |+| 16 | PIN16 | power_in | Connect to GNDIO (digital I/O ground). |+| 17 | COM3 | input | Digital interface pin 3. In I2C mode selects the 7-bit slave address (0x28 when tied low, 0x29 when tied high). In UART and HID-I2C modes tie to GNDIO. |+| 18 | COM2 | bidirectional | Digital interface pin 2. Unused in the documented modes; tie to GNDIO for UART and HID-I2C modes. |+| 19 | COM1/SCL/Rx | bidirectional | Digital interface pin 1. Serves as I2C SCL (clock, open-drain) in I2C and HID-I2C modes, or as UART Rx input when PS pins select UART. |+| 20 | COM0/SDA/Tx | bidirectional | Digital interface pin 0. Serves as I2C SDA (data, open-drain) in I2C and HID-I2C modes, or as UART Tx output when PS pins select UART. |+| 21 | PIN21 | unconnected | Reserved / do not connect. |+| 22 | PIN22 | unconnected | Reserved / do not connect. |+| 23 | PIN23 | unconnected | Reserved / do not connect. |+| 24 | PIN24 | unconnected | Reserved / do not connect. |+| 25 | GNDIO | power_in | Digital I/O ground reference for the VDDIO domain. |+| 26 | XOUT32 | output | Optional 32 kHz crystal oscillator output. Connect to an external 32.768 kHz crystal for improved timing; leave open if unused. |+| 27 | XIN32 | input | Optional 32 kHz crystal oscillator input. Connect the other terminal of the 32.768 kHz crystal here; leave open if unused. |+| 28 | VDDIO | power_in | Digital I/O and internal MCU/interface supply. Operating range 1.7 V to 3.6 V; decouple with 100 nF close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Bosch Sensortec |+| Package | LGA-28(3.8x5.2) |+| Category | Sensor |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `BNO055`+- Footprint: `Package_LGA:LGA-28_5.2x3.8mm_P0.5mm`+- 3D model: LGA-28(3.8x5.2) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Bosch Sensortec datasheet](docs/bno055-datasheet.pdf) (106 pp, sha256 `20c83174fef87553`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/bno055-datasheet.pdf)
bno055.glbadded⋯ 1 unchanged line ⋯
bno055.kicad_modadded+411@@ -0,0 +1,411 @@+(footprint "LGA-28_5.2x3.8mm_P0.5mm"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "LGA 28 5.2x3.8mm Pitch 0.5mm")+ (tags "LGA 28 5.2x3.8mm Pitch 0.5mm")+ (property "Reference" "REF**"+ (at 0 -3.25 0)+ (layer "F.SilkS")+ (uuid "22f8da80-804e-47b1-996d-7cd9cef88709")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "LGA-28_5.2x3.8mm_P0.5mm"+ (at 0 3.3 0)+ (layer "F.Fab")+ (uuid "360fac60-9e0c-43d8-925a-0bd07b5f862c")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "1a7f8a64-5e28-48a4-a69b-0de405157dde")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "a6c2fc5d-5e04-4bbd-ae8c-29011ed817e8")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -2.71 2.01)+ (end -2.71 1.75)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "5b1f3143-c557-45a3-8209-6e47eb7a4f26")+ )+ (fp_line+ (start -2.71 2.01)+ (end -2.45 2.01)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "d39fd8c2-285f-4223-acf6-2e9b3ecfde56")+ )+ (fp_line+ (start 2.71 -2.01)+ (end 2.45 -2.01)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "b945d8df-c484-41b3-a745-c851ad7b0d31")+ )+ (fp_line+ (start 2.71 -2.01)+ (end 2.71 -1.75)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "be5249b6-230d-4b88-b0cf-b8eeed7d409e")+ )+ (fp_line+ (start 2.71 2.01)+ (end 2.45 2.01)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "d2c63504-2770-44c1-8e0f-921b18f22fcf")+ )+ (fp_line+ (start 2.71 2.01)+ (end 2.71 1.75)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "699aebe3-59bd-4d2a-942d-ac7be889f5eb")+ )+ (fp_poly+ (pts+ (xy -2.71 -2.01) (xy -3.07 -2.01) (xy -2.71 -2.37) (xy -2.71 -2.01)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ (uuid "3c5028b0-f857-4c4a-aee1-226163a3a55e")+ )+ (fp_line+ (start -2.98 -2.25)+ (end -2.98 2.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "cfdf9a3f-9b0b-4d01-a099-2b27d221e731")+ )+ (fp_line+ (start -2.98 2.25)+ (end 2.98 2.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "8a628c8d-5310-4ada-8af5-2210bf947bec")+ )+ (fp_line+ (start 2.98 -2.25)+ (end -2.98 -2.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "79b45133-bd8c-43d0-8838-23b65e7a7a6e")+ )+ (fp_line+ (start 2.98 2.25)+ (end 2.98 -2.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "4f02046f-a0dd-4097-9184-355339e436d5")+ )+ (fp_line+ (start -2.6 -1.4)+ (end -2.6 1.9)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "ddf8d93a-8a87-4d9d-822b-c9d6c7cc164e")+ )+ (fp_line+ (start -2.6 -1.4)+ (end -2.1 -1.9)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "0a8fac67-aa15-4e03-9d4d-81b34d090703")+ )+ (fp_line+ (start -2.6 1.9)+ (end 2.6 1.9)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "519aa445-079a-4500-bece-ac35ce7317ec")+ )+ (fp_line+ (start 2.6 -1.9)+ (end -2.1 -1.9)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "fa1f714f-c427-4d41-83b3-ccb6a899ea2e")+ )+ (fp_line+ (start 2.6 1.9)+ (end 2.6 -1.9)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "71b3f939-ac2b-43d1-b527-365b8a027b76")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (uuid "c19f275d-32bb-467b-a32d-d6eac6aaa5ec")+ (effects+ (font+ (size 1.1 1.1)+ (thickness 0.11)+ )+ )+ )+ (pad "1" smd rect+ (at -2.25 -1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "9065158b-6938-4101-a9cc-e5f02f4c25de")+ )+ (pad "2" smd rect+ (at -2.3875 -0.75 90)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "72c45873-5d47-42c6-887d-119da81b378e")+ )+ (pad "3" smd rect+ (at -2.3875 -0.25 90)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "3aa86134-8f25-4a8b-bce7-e3dfeaf7398f")+ )+ (pad "4" smd rect+ (at -2.3875 0.25 90)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "d1164ba4-e20e-47ea-bf0d-8cc3eb3d3829")+ )+ (pad "5" smd rect+ (at -2.3875 0.75 90)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "3a844abb-da4c-46de-afaa-62a4c9629dd4")+ )+ (pad "6" smd rect+ (at -2.25 1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "c90d0494-fd66-4988-8996-eb6362159773")+ )+ (pad "7" smd rect+ (at -1.75 1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "414cb805-8bfa-4e05-851d-a4353acfdf46")+ )+ (pad "8" smd rect+ (at -1.25 1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "0bbc1f7c-6d3b-4b0b-ba5c-c36cdff3bbaf")+ )+ (pad "9" smd rect+ (at -0.75 1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "09fdbb88-cfbb-4fcb-ab5b-5d9696946cdb")+ )+ (pad "10" smd rect+ (at -0.25 1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "8a59547b-58cf-4ddd-bb53-33772e4ab244")+ )+ (pad "11" smd rect+ (at 0.25 1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "0e20e1ec-949a-4233-916d-95d75824df38")+ )+ (pad "12" smd rect+ (at 0.75 1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "3e2cf039-992d-4303-968d-f32865265542")+ )+ (pad "13" smd rect+ (at 1.25 1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "197b0814-838c-4c29-a1f2-a0b00b9c28e3")+ )+ (pad "14" smd rect+ (at 1.75 1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "68009fee-0d0c-4d60-b502-e2519e101938")+ )+ (pad "15" smd rect+ (at 2.25 1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "c34305a8-5637-4203-8251-9c8b1ae7c26f")+ )+ (pad "16" smd rect+ (at 2.3875 0.75 90)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "b01fdcdb-7d5b-4285-94fb-400b92323913")+ )+ (pad "17" smd rect+ (at 2.3875 0.25 90)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "8551ef80-118e-445f-82fa-1afa9f466a6a")+ )+ (pad "18" smd rect+ (at 2.3875 -0.25 90)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "39b8724b-c9f0-441c-bdb1-97e8f5e07e4e")+ )+ (pad "19" smd rect+ (at 2.3875 -0.75 90)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "96dafd80-5550-4b3f-b607-2c81dcec1c7d")+ )+ (pad "20" smd rect+ (at 2.25 -1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "444ea869-0a77-4fbd-9bec-228ed16a2c9b")+ )+ (pad "21" smd rect+ (at 1.75 -1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "b10ed253-ab6b-4436-a859-3124eaa110b2")+ )+ (pad "22" smd rect+ (at 1.25 -1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "489ee7bb-ea83-486e-a48c-772c4d4d4cd0")+ )+ (pad "23" smd rect+ (at 0.75 -1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "e8ed430d-6d92-4f07-8bf3-eac6ad429010")+ )+ (pad "24" smd rect+ (at 0.25 -1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "24c8139b-06fc-4498-bb68-3633a208fe55")+ )+ (pad "25" smd rect+ (at -0.25 -1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "210ef826-2aae-41b5-b800-46e254f6a0bc")+ )+ (pad "26" smd rect+ (at -0.75 -1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "a4eb5f92-8ba2-4a78-a6f7-508c8ac2f2ce")+ )+ (pad "27" smd rect+ (at -1.25 -1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "a8254ef8-805f-4cca-b3fc-ebf955fcbbea")+ )+ (pad "28" smd rect+ (at -1.75 -1.6625)+ (size 0.254 0.675)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "12b3b047-ba96-4345-840e-532e5dcb376c")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_LGA.3dshapes/LGA-28_5.2x3.8mm_P0.5mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
bno055.kicad_symadded+621@@ -0,0 +1,621 @@+(kicad_symbol_lib+ (version 20251024)+ (generator "kicad_symbol_editor")+ (generator_version "10.0")+(symbol "BNO055"+ (exclude_from_sim no)+ (in_bom yes)+ (on_board yes)+ (in_pos_files yes)+ (duplicate_pin_numbers_are_jumpers no)+ (property "Reference" "U"+ (at -11.43 16.51 0)+ (show_name no)+ (do_not_autoplace no)+ (effects+ (font+ (size 1.27 1.27)+ )+ (justify right)+ )+ )+ (property "Value" "BNO055"+ (at 12.7 16.51 0)+ (show_name no)+ (do_not_autoplace no)+ (effects+ (font+ (size 1.27 1.27)+ )+ (justify right)+ )+ )+ (property "Footprint" "Package_LGA:LGA-28_5.2x3.8mm_P0.5mm"+ (at 6.35 -16.51 0)+ (show_name no)+ (do_not_autoplace no)+ (hide yes)+ (effects+ (font+ (size 1.27 1.27)+ )+ (justify left)+ )+ )+ (property "Datasheet" "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bno055-ds000.pdf"+ (at 0 5.08 0)+ (show_name no)+ (do_not_autoplace no)+ (hide yes)+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (property "Description" "Intelligent 9-axis absolute orientation sensor, LGA-28"+ (at 0 0 0)+ (show_name no)+ (do_not_autoplace no)+ (hide yes)+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (property "ki_keywords" "IMU Fusion I2C UART"+ (at 0 0 0)+ (show_name no)+ (do_not_autoplace no)+ (hide yes)+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (property "ki_fp_filters" "LGA*5.2x3.8mm*P0.5mm*"+ (at 0 0 0)+ (show_name no)+ (do_not_autoplace no)+ (hide yes)+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (symbol "BNO055_0_1"+ (rectangle+ (start -12.7 15.24)+ (end 12.7 -15.24)+ (stroke+ (width 0.254)+ (type default)+ )+ (fill+ (type background)+ )+ )+ )+ (symbol "BNO055_1_1"+ (pin no_connect line+ (at -12.7 10.16 0)+ (length 2.54)+ (hide yes)+ (name "PIN1"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "1"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin power_in line+ (at -2.54 -17.78 90)+ (length 2.54)+ (name "GND"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "2"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin power_in line+ (at -2.54 17.78 270)+ (length 2.54)+ (name "VDD"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "3"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input line+ (at -15.24 2.54 0)+ (length 2.54)+ (name "~{BOOT_LOAD_PIN}"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "4"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input line+ (at 15.24 -10.16 180)+ (length 2.54)+ (name "PS1"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "5"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input line+ (at 15.24 -7.62 180)+ (length 2.54)+ (name "PS0"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "6"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin no_connect line+ (at -12.7 5.08 0)+ (length 2.54)+ (hide yes)+ (name "PIN7"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "7"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin no_connect line+ (at -12.7 -2.54 0)+ (length 2.54)+ (hide yes)+ (name "PIN8"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "8"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin passive line+ (at 15.24 -12.7 180)+ (length 2.54)+ (name "CAP"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "9"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin output line+ (at -15.24 0 0)+ (length 2.54)+ (name "BL_IND"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "10"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input line+ (at -15.24 12.7 0)+ (length 2.54)+ (name "~{RESET}"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "11"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin no_connect line+ (at 12.7 10.16 180)+ (length 2.54)+ (hide yes)+ (name "PIN12"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "12"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin no_connect line+ (at 12.7 7.62 180)+ (length 2.54)+ (hide yes)+ (name "PIN13"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "13"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin output line+ (at -15.24 7.62 0)+ (length 2.54)+ (name "INT"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "14"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin no_connect line+ (at 5.08 -15.24 90)+ (length 2.54)+ (hide yes)+ (name "PIN15"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "15"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin no_connect line+ (at 7.62 -15.24 90)+ (length 2.54)+ (hide yes)+ (name "PIN16"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "16"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input line+ (at -15.24 -12.7 0)+ (length 2.54)+ (name "COM3"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "17"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin passive line+ (at -15.24 -10.16 0)+ (length 2.54)+ (name "COM2"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "18"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin bidirectional line+ (at -15.24 -7.62 0)+ (length 2.54)+ (name "COM1"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "19"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin bidirectional line+ (at -15.24 -5.08 0)+ (length 2.54)+ (name "COM0"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "20"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin no_connect line+ (at 12.7 5.08 180)+ (length 2.54)+ (hide yes)+ (name "PIN21"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "21"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin no_connect line+ (at 12.7 2.54 180)+ (length 2.54)+ (hide yes)+ (name "PIN22"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "22"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin no_connect line+ (at 12.7 -2.54 180)+ (length 2.54)+ (hide yes)+ (name "PIN23"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "23"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin no_connect line+ (at 12.7 -5.08 180)+ (length 2.54)+ (hide yes)+ (name "PIN24"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "24"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin power_in line+ (at 2.54 -17.78 90)+ (length 2.54)+ (name "GNDIO"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "25"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin output line+ (at 15.24 12.7 180)+ (length 2.54)+ (name "XOUT32"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "26"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input line+ (at 15.24 0 180)+ (length 2.54)+ (name "XIN32"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "27"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin power_in line+ (at 2.54 17.78 270)+ (length 2.54)+ (name "VDDIO"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "28"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ )+ (embedded_fonts no)+ )+)
bno055.lbradded+190@@ -0,0 +1,190 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description>Intelligent 9-axis absolute orientation sensor, LGA-28</description>+<packages>+<package name="LGA-28_5.2x3.8mm_P0.5mm">+ <description>LGA-28, 5.2 x 3.8 mm, 0.5 mm pitch</description>+ <smd name="1" x="-2.2500" y="1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="2" x="-2.3875" y="0.7500" dx="0.2540" dy="0.6750" layer="1" rot="R90"/>+ <smd name="3" x="-2.3875" y="0.2500" dx="0.2540" dy="0.6750" layer="1" rot="R90"/>+ <smd name="4" x="-2.3875" y="-0.2500" dx="0.2540" dy="0.6750" layer="1" rot="R90"/>+ <smd name="5" x="-2.3875" y="-0.7500" dx="0.2540" dy="0.6750" layer="1" rot="R90"/>+ <smd name="6" x="-2.2500" y="-1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="7" x="-1.7500" y="-1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="8" x="-1.2500" y="-1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="9" x="-0.7500" y="-1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="10" x="-0.2500" y="-1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="11" x="0.2500" y="-1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="12" x="0.7500" y="-1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="13" x="1.2500" y="-1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="14" x="1.7500" y="-1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="15" x="2.2500" y="-1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="16" x="2.3875" y="-0.7500" dx="0.2540" dy="0.6750" layer="1" rot="R90"/>+ <smd name="17" x="2.3875" y="-0.2500" dx="0.2540" dy="0.6750" layer="1" rot="R90"/>+ <smd name="18" x="2.3875" y="0.2500" dx="0.2540" dy="0.6750" layer="1" rot="R90"/>+ <smd name="19" x="2.3875" y="0.7500" dx="0.2540" dy="0.6750" layer="1" rot="R90"/>+ <smd name="20" x="2.2500" y="1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="21" x="1.7500" y="1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="22" x="1.2500" y="1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="23" x="0.7500" y="1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="24" x="0.2500" y="1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="25" x="-0.2500" y="1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="26" x="-0.7500" y="1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="27" x="-1.2500" y="1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <smd name="28" x="-1.7500" y="1.6625" dx="0.2540" dy="0.6750" layer="1"/>+ <polygon width="0.1000" layer="21">+ <vertex x="-2.7100" y="2.0100"/>+ <vertex x="-3.0700" y="2.0100"/>+ <vertex x="-2.7100" y="2.3700"/>+ <vertex x="-2.7100" y="2.0100"/>+ </polygon>+ <wire x1="-2.7100" y1="-2.0100" x2="-2.7100" y2="-1.7500" width="0.1200" layer="21"/>+ <wire x1="-2.7100" y1="-2.0100" x2="-2.4500" y2="-2.0100" width="0.1200" layer="21"/>+ <wire x1="2.7100" y1="2.0100" x2="2.4500" y2="2.0100" width="0.1200" layer="21"/>+ <wire x1="2.7100" y1="2.0100" x2="2.7100" y2="1.7500" width="0.1200" layer="21"/>+ <wire x1="2.7100" y1="-2.0100" x2="2.4500" y2="-2.0100" width="0.1200" layer="21"/>+ <wire x1="2.7100" y1="-2.0100" x2="2.7100" y2="-1.7500" width="0.1200" layer="21"/>+ <wire x1="-2.6000" y1="1.4000" x2="-2.6000" y2="-1.9000" width="0.1000" layer="51"/>+ <wire x1="-2.6000" y1="1.4000" x2="-2.1000" y2="1.9000" width="0.1000" layer="51"/>+ <wire x1="-2.6000" y1="-1.9000" x2="2.6000" y2="-1.9000" width="0.1000" layer="51"/>+ <wire x1="2.6000" y1="1.9000" x2="-2.1000" y2="1.9000" width="0.1000" layer="51"/>+ <wire x1="2.6000" y1="-1.9000" x2="2.6000" y2="1.9000" width="0.1000" layer="51"/>+ <text x="0" y="2.610" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-2.610" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="BNO055">+ <description>Intelligent 9-axis absolute orientation sensor, LGA-28</description>+ <wire x1="-20.32" y1="25.4" x2="20.32" y2="25.4" width="0.254" layer="94"/>+ <wire x1="20.32" y1="25.4" x2="20.32" y2="-22.86" width="0.254" layer="94"/>+ <wire x1="20.32" y1="-22.86" x2="-20.32" y2="-22.86" width="0.254" layer="94"/>+ <wire x1="-20.32" y1="-22.86" x2="-20.32" y2="25.4" width="0.254" layer="94"/>+ <text x="-11.4300" y="16.5100" size="1.27" layer="95" align="center">>NAME</text>+ <text x="12.7000" y="16.5100" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="PIN1" x="25.4" y="5.079999999999998" length="middle" direction="io" rot="R180"/>+ <pin name="GND" x="-25.4" y="-2.539999999999999" length="middle" direction="pwr"/>+ <pin name="VDD" x="-25.4" y="-7.620000000000001" length="middle" direction="pwr"/>+ <pin name="BOOT_LOAD_PIN" x="-25.4" y="12.7" length="middle" direction="in"/>+ <pin name="PS1" x="-25.4" y="17.78" length="middle" direction="in"/>+ <pin name="PS0" x="-25.4" y="20.32" length="middle" direction="in"/>+ <pin name="PIN7" x="25.4" y="2.539999999999999" length="middle" direction="io" rot="R180"/>+ <pin name="PIN8" x="25.4" y="0" length="middle" direction="io" rot="R180"/>+ <pin name="CAP" x="-25.4" y="5.079999999999998" length="middle" direction="pas"/>+ <pin name="BL_IND" x="25.4" y="22.86" length="middle" direction="out" rot="R180"/>+ <pin name="RESET" x="-25.4" y="10.16" length="middle" direction="in"/>+ <pin name="PIN12" x="25.4" y="-2.539999999999999" length="middle" direction="io" rot="R180"/>+ <pin name="PIN13" x="25.4" y="-5.080000000000002" length="middle" direction="io" rot="R180"/>+ <pin name="INT" x="25.4" y="20.32" length="middle" direction="out" rot="R180"/>+ <pin name="PIN15" x="25.4" y="-7.620000000000001" length="middle" direction="io" rot="R180"/>+ <pin name="PIN16" x="25.4" y="-10.160000000000004" length="middle" direction="io" rot="R180"/>+ <pin name="COM3" x="-25.4" y="22.86" length="middle" direction="in"/>+ <pin name="COM2" x="-25.4" y="2.539999999999999" length="middle" direction="pas"/>+ <pin name="COM1" x="25.4" y="10.16" length="middle" direction="io" rot="R180"/>+ <pin name="COM0" x="25.4" y="12.7" length="middle" direction="io" rot="R180"/>+ <pin name="PIN21" x="25.4" y="-12.700000000000003" length="middle" direction="io" rot="R180"/>+ <pin name="PIN22" x="25.4" y="-15.240000000000002" length="middle" direction="io" rot="R180"/>+ <pin name="PIN23" x="25.4" y="-17.78" length="middle" direction="io" rot="R180"/>+ <pin name="PIN24" x="25.4" y="-20.32" length="middle" direction="io" rot="R180"/>+ <pin name="GNDIO" x="-25.4" y="-5.080000000000002" length="middle" direction="pwr"/>+ <pin name="XOUT32" x="25.4" y="17.78" length="middle" direction="out" rot="R180"/>+ <pin name="XIN32" x="-25.4" y="15.239999999999998" length="middle" direction="in"/>+ <pin name="VDDIO" x="-25.4" y="-10.160000000000004" length="middle" direction="pwr"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="BNO055" prefix="U">+ <description>Intelligent 9-axis absolute orientation sensor, LGA-28</description>+ <gates>+ <gate name="G$1" symbol="BNO055" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="LGA-28_5.2x3.8mm_P0.5mm">+ <connects>+ <connect gate="G$1" pin="PIN1" pad="1"/>+ <connect gate="G$1" pin="GND" pad="2"/>+ <connect gate="G$1" pin="VDD" pad="3"/>+ <connect gate="G$1" pin="BOOT_LOAD_PIN" pad="4"/>+ <connect gate="G$1" pin="PS1" pad="5"/>+ <connect gate="G$1" pin="PS0" pad="6"/>+ <connect gate="G$1" pin="PIN7" pad="7"/>+ <connect gate="G$1" pin="PIN8" pad="8"/>+ <connect gate="G$1" pin="CAP" pad="9"/>+ <connect gate="G$1" pin="BL_IND" pad="10"/>+ <connect gate="G$1" pin="RESET" pad="11"/>+ <connect gate="G$1" pin="PIN12" pad="12"/>+ <connect gate="G$1" pin="PIN13" pad="13"/>+ <connect gate="G$1" pin="INT" pad="14"/>+ <connect gate="G$1" pin="PIN15" pad="15"/>+ <connect gate="G$1" pin="PIN16" pad="16"/>+ <connect gate="G$1" pin="COM3" pad="17"/>+ <connect gate="G$1" pin="COM2" pad="18"/>+ <connect gate="G$1" pin="COM1" pad="19"/>+ <connect gate="G$1" pin="COM0" pad="20"/>+ <connect gate="G$1" pin="PIN21" pad="21"/>+ <connect gate="G$1" pin="PIN22" pad="22"/>+ <connect gate="G$1" pin="PIN23" pad="23"/>+ <connect gate="G$1" pin="PIN24" pad="24"/>+ <connect gate="G$1" pin="GNDIO" pad="25"/>+ <connect gate="G$1" pin="XOUT32" pad="26"/>+ <connect gate="G$1" pin="XIN32" pad="27"/>+ <connect gate="G$1" pin="VDDIO" pad="28"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
bno055.stepadded+5305@@ -0,0 +1,5305 @@+ISO-10303-21; +HEADER; +/* LGA-28_5.2x3.8mm_P0.5mm.step 3D STEP model for use in ECAD systems + * Copyright (C) 2018, kicad StepUp + * + * This work is licensed under the [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode), + * with the following exception: + * To the extent that the creation of electronic designs that use 'Licensed Material' can be considered to be 'Adapted Material', + * then the copyright holder waives article 3 of the license with respect to these designs and any generated files which use data provided + * as part of the 'Licensed Material'. + * You are free to use the library data in your own projects without the obligation to share your project files under this or any other license agreement. + * However, if you wish to redistribute these libraries, or parts thereof (including in modified form) as a collection then the exception above does not apply. + * Please refer to https://github.com/KiCad/kicad-packages3D/blob/master/LICENSE.md for further clarification of the exception. + * Disclaimer of Warranties and Limitation of Liability. + * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied. + * *USE 3D CAD DATA AT YOUR OWN RISK* + * *DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.* + * + */ + +FILE_DESCRIPTION( +/* description */ ('model of LGA-28_5.2x3.8mm_P0.5mm'), +/* implementation_level */ '2;1'); + +FILE_NAME( +/* name */ 'LGA-28_5.2x3.8mm_P0.5mm.step', +/* time_stamp */ '2018-10-12T20:49:12', +/* author */ ('kicad StepUp','ksu'), +/* organization */ ('FreeCAD'), +/* preprocessor_version */ 'OCC', +/* originating_system */ 'kicad StepUp', +/* authorisation */ ''); + +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; + +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', +'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( +'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('LGA_28_52x38mm_P05mm','LGA_28_52x38mm_P05mm','',(#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#4186); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#13 = DIRECTION('',(0.E+000,0.E+000,1.)); +#14 = DIRECTION('',(1.,0.E+000,-0.E+000)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#57,#88,#112,#136,#153,#1117,#1148,#1172, +#1196,#1213,#1244,#1268,#1292,#1309,#1340,#1364,#1388,#1405,#1436, +#1460,#1484,#1501,#1532,#1556,#1580,#1597,#1628,#1652,#1676,#1693, +#1724,#1748,#1772,#1789,#1820,#1844,#1868,#1885,#1916,#1940,#1964, +#1981,#2012,#2036,#2060,#2077,#2108,#2132,#2156,#2173,#2204,#2228, +#2252,#2269,#2300,#2324,#2348,#2365,#2396,#2420,#2444,#2461,#2492, +#2516,#2540,#2557,#2588,#2612,#2636,#2653,#2684,#2708,#2732,#2749, +#2780,#2804,#2828,#2845,#2876,#2900,#2924,#2941,#2972,#2996,#3020, +#3037,#3068,#3092,#3116,#3133,#3164,#3188,#3212,#3229,#3260,#3284, +#3308,#3325,#3356,#3380,#3404,#3421,#3452,#3476,#3500,#3517,#3548, +#3572,#3596,#3613,#3644,#3668,#3692,#3709,#3740,#3764,#3788,#3805, +#3828,#3840,#3852,#3864,#3876,#3888,#3900,#3912,#3924,#3936,#3948, +#3960,#3972,#3984,#3996,#4008,#4020,#4032,#4044,#4056,#4068,#4080, +#4092,#4104,#4116,#4128,#4140,#4152,#4177)); +#17 = ADVANCED_FACE('',(#18),#52,.F.); +#18 = FACE_BOUND('',#19,.F.); +#19 = EDGE_LOOP('',(#20,#30,#38,#46)); +#20 = ORIENTED_EDGE('',*,*,#21,.T.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(-2.375,1.8,0.E+000)); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(-2.375,1.325,0.E+000)); +#26 = LINE('',#27,#28); +#27 = CARTESIAN_POINT('',(-2.375,1.8,0.E+000)); +#28 = VECTOR('',#29,1.); +#29 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#30 = ORIENTED_EDGE('',*,*,#31,.T.); +#31 = EDGE_CURVE('',#24,#32,#34,.T.); +#32 = VERTEX_POINT('',#33); +#33 = CARTESIAN_POINT('',(-2.125,1.325,0.E+000)); +#34 = LINE('',#35,#36); +#35 = CARTESIAN_POINT('',(-2.375,1.325,0.E+000)); +#36 = VECTOR('',#37,1.); +#37 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#38 = ORIENTED_EDGE('',*,*,#39,.T.); +#39 = EDGE_CURVE('',#32,#40,#42,.T.); +#40 = VERTEX_POINT('',#41); +#41 = CARTESIAN_POINT('',(-2.125,1.8,0.E+000)); +#42 = LINE('',#43,#44); +#43 = CARTESIAN_POINT('',(-2.125,1.325,0.E+000)); +#44 = VECTOR('',#45,1.); +#45 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#46 = ORIENTED_EDGE('',*,*,#47,.T.); +#47 = EDGE_CURVE('',#40,#22,#48,.T.); +#48 = LINE('',#49,#50); +#49 = CARTESIAN_POINT('',(-2.125,1.8,0.E+000)); +#50 = VECTOR('',#51,1.); +#51 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#52 = PLANE('',#53); +#53 = AXIS2_PLACEMENT_3D('',#54,#55,#56); +#54 = CARTESIAN_POINT('',(-2.25,1.5625,0.E+000)); +#55 = DIRECTION('',(0.E+000,0.E+000,1.)); +#56 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#57 = ADVANCED_FACE('',(#58),#83,.F.); +#58 = FACE_BOUND('',#59,.F.); +#59 = EDGE_LOOP('',(#60,#61,#69,#77)); +#60 = ORIENTED_EDGE('',*,*,#21,.F.); +#61 = ORIENTED_EDGE('',*,*,#62,.T.); +#62 = EDGE_CURVE('',#22,#63,#65,.T.); +#63 = VERTEX_POINT('',#64); +#64 = CARTESIAN_POINT('',(-2.375,1.8,2.5E-002)); +#65 = LINE('',#66,#67); +#66 = CARTESIAN_POINT('',(-2.375,1.8,0.E+000)); +#67 = VECTOR('',#68,1.); +#68 = DIRECTION('',(0.E+000,0.E+000,1.)); +#69 = ORIENTED_EDGE('',*,*,#70,.F.); +#70 = EDGE_CURVE('',#71,#63,#73,.T.); +#71 = VERTEX_POINT('',#72); +#72 = CARTESIAN_POINT('',(-2.375,1.325,2.5E-002)); +#73 = LINE('',#74,#75); +#74 = CARTESIAN_POINT('',(-2.375,1.85,2.5E-002)); +#75 = VECTOR('',#76,1.); +#76 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#77 = ORIENTED_EDGE('',*,*,#78,.F.); +#78 = EDGE_CURVE('',#24,#71,#79,.T.); +#79 = LINE('',#80,#81); +#80 = CARTESIAN_POINT('',(-2.375,1.325,0.E+000)); +#81 = VECTOR('',#82,1.); +#82 = DIRECTION('',(0.E+000,0.E+000,1.)); +#83 = PLANE('',#84); +#84 = AXIS2_PLACEMENT_3D('',#85,#86,#87); +#85 = CARTESIAN_POINT('',(-2.375,1.8,0.E+000)); +#86 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#87 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#88 = ADVANCED_FACE('',(#89),#107,.F.); +#89 = FACE_BOUND('',#90,.F.); +#90 = EDGE_LOOP('',(#91,#92,#93,#101)); +#91 = ORIENTED_EDGE('',*,*,#31,.F.); +#92 = ORIENTED_EDGE('',*,*,#78,.T.); +#93 = ORIENTED_EDGE('',*,*,#94,.F.); +#94 = EDGE_CURVE('',#95,#71,#97,.T.); +#95 = VERTEX_POINT('',#96); +#96 = CARTESIAN_POINT('',(-2.125,1.325,2.5E-002)); +#97 = LINE('',#98,#99); +#98 = CARTESIAN_POINT('',(-2.4875,1.325,2.5E-002)); +#99 = VECTOR('',#100,1.); +#100 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#101 = ORIENTED_EDGE('',*,*,#102,.F.); +#102 = EDGE_CURVE('',#32,#95,#103,.T.); +#103 = LINE('',#104,#105); +#104 = CARTESIAN_POINT('',(-2.125,1.325,0.E+000)); +#105 = VECTOR('',#106,1.); +#106 = DIRECTION('',(0.E+000,0.E+000,1.)); +#107 = PLANE('',#108); +#108 = AXIS2_PLACEMENT_3D('',#109,#110,#111); +#109 = CARTESIAN_POINT('',(-2.375,1.325,0.E+000)); +#110 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#111 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#112 = ADVANCED_FACE('',(#113),#131,.F.); +#113 = FACE_BOUND('',#114,.F.); +#114 = EDGE_LOOP('',(#115,#116,#117,#125)); +#115 = ORIENTED_EDGE('',*,*,#39,.F.); +#116 = ORIENTED_EDGE('',*,*,#102,.T.); +#117 = ORIENTED_EDGE('',*,*,#118,.F.); +#118 = EDGE_CURVE('',#119,#95,#121,.T.); +#119 = VERTEX_POINT('',#120); +#120 = CARTESIAN_POINT('',(-2.125,1.8,2.5E-002)); +#121 = LINE('',#122,#123); +#122 = CARTESIAN_POINT('',(-2.125,1.6125,2.5E-002)); +#123 = VECTOR('',#124,1.); +#124 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#125 = ORIENTED_EDGE('',*,*,#126,.F.); +#126 = EDGE_CURVE('',#40,#119,#127,.T.); +#127 = LINE('',#128,#129); +#128 = CARTESIAN_POINT('',(-2.125,1.8,0.E+000)); +#129 = VECTOR('',#130,1.); +#130 = DIRECTION('',(0.E+000,0.E+000,1.)); +#131 = PLANE('',#132); +#132 = AXIS2_PLACEMENT_3D('',#133,#134,#135); +#133 = CARTESIAN_POINT('',(-2.125,1.325,0.E+000)); +#134 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#135 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#136 = ADVANCED_FACE('',(#137),#148,.F.); +#137 = FACE_BOUND('',#138,.F.); +#138 = EDGE_LOOP('',(#139,#140,#141,#147)); +#139 = ORIENTED_EDGE('',*,*,#47,.F.); +#140 = ORIENTED_EDGE('',*,*,#126,.T.); +#141 = ORIENTED_EDGE('',*,*,#142,.F.); +#142 = EDGE_CURVE('',#63,#119,#143,.T.); +#143 = LINE('',#144,#145); +#144 = CARTESIAN_POINT('',(-2.3625,1.8,2.5E-002)); +#145 = VECTOR('',#146,1.); +#146 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#147 = ORIENTED_EDGE('',*,*,#62,.F.); +#148 = PLANE('',#149); +#149 = AXIS2_PLACEMENT_3D('',#150,#151,#152); +#150 = CARTESIAN_POINT('',(-2.125,1.8,0.E+000)); +#151 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#152 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#153 = ADVANCED_FACE('',(#154,#188,#222,#256,#290,#324,#358,#392,#426, +#460,#494,#528,#562,#596,#630,#664,#698,#704,#738,#772,#806,#840, +#874,#908,#942,#976,#1010,#1044,#1078),#1112,.F.); +#154 = FACE_BOUND('',#155,.F.); +#155 = EDGE_LOOP('',(#156,#166,#174,#182)); +#156 = ORIENTED_EDGE('',*,*,#157,.F.); +#157 = EDGE_CURVE('',#158,#160,#162,.T.); +#158 = VERTEX_POINT('',#159); +#159 = CARTESIAN_POINT('',(-2.6,1.9,2.5E-002)); +#160 = VERTEX_POINT('',#161); +#161 = CARTESIAN_POINT('',(2.6,1.9,2.5E-002)); +#162 = LINE('',#163,#164); +#163 = CARTESIAN_POINT('',(-2.6,1.9,2.5E-002)); +#164 = VECTOR('',#165,1.); +#165 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#166 = ORIENTED_EDGE('',*,*,#167,.T.); +#167 = EDGE_CURVE('',#158,#168,#170,.T.); +#168 = VERTEX_POINT('',#169); +#169 = CARTESIAN_POINT('',(-2.6,-1.9,2.5E-002)); +#170 = LINE('',#171,#172); +#171 = CARTESIAN_POINT('',(-2.6,1.9,2.5E-002)); +#172 = VECTOR('',#173,1.); +#173 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#174 = ORIENTED_EDGE('',*,*,#175,.T.); +#175 = EDGE_CURVE('',#168,#176,#178,.T.); +#176 = VERTEX_POINT('',#177); +#177 = CARTESIAN_POINT('',(2.6,-1.9,2.5E-002)); +#178 = LINE('',#179,#180); +#179 = CARTESIAN_POINT('',(-2.6,-1.9,2.5E-002)); +#180 = VECTOR('',#181,1.); +#181 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#182 = ORIENTED_EDGE('',*,*,#183,.F.); +#183 = EDGE_CURVE('',#160,#176,#184,.T.); +#184 = LINE('',#185,#186); +#185 = CARTESIAN_POINT('',(2.6,1.9,2.5E-002)); +#186 = VECTOR('',#187,1.); +#187 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#188 = FACE_BOUND('',#189,.F.); +#189 = EDGE_LOOP('',(#190,#200,#208,#216)); +#190 = ORIENTED_EDGE('',*,*,#191,.T.); +#191 = EDGE_CURVE('',#192,#194,#196,.T.); +#192 = VERTEX_POINT('',#193); +#193 = CARTESIAN_POINT('',(-1.125,1.325,2.5E-002)); +#194 = VERTEX_POINT('',#195); +#195 = CARTESIAN_POINT('',(-1.375,1.325,2.5E-002)); +#196 = LINE('',#197,#198); +#197 = CARTESIAN_POINT('',(-1.9875,1.325,2.5E-002)); +#198 = VECTOR('',#199,1.); +#199 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#200 = ORIENTED_EDGE('',*,*,#201,.T.); +#201 = EDGE_CURVE('',#194,#202,#204,.T.); +#202 = VERTEX_POINT('',#203); +#203 = CARTESIAN_POINT('',(-1.375,1.8,2.5E-002)); +#204 = LINE('',#205,#206); +#205 = CARTESIAN_POINT('',(-1.375,1.85,2.5E-002)); +#206 = VECTOR('',#207,1.); +#207 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#208 = ORIENTED_EDGE('',*,*,#209,.T.); +#209 = EDGE_CURVE('',#202,#210,#212,.T.); +#210 = VERTEX_POINT('',#211); +#211 = CARTESIAN_POINT('',(-1.125,1.8,2.5E-002)); +#212 = LINE('',#213,#214); +#213 = CARTESIAN_POINT('',(-1.8625,1.8,2.5E-002)); +#214 = VECTOR('',#215,1.); +#215 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#216 = ORIENTED_EDGE('',*,*,#217,.T.); +#217 = EDGE_CURVE('',#210,#192,#218,.T.); +#218 = LINE('',#219,#220); +#219 = CARTESIAN_POINT('',(-1.125,1.6125,2.5E-002)); +#220 = VECTOR('',#221,1.); +#221 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#222 = FACE_BOUND('',#223,.F.); +#223 = EDGE_LOOP('',(#224,#234,#242,#250)); +#224 = ORIENTED_EDGE('',*,*,#225,.T.); +#225 = EDGE_CURVE('',#226,#228,#230,.T.); +#226 = VERTEX_POINT('',#227); +#227 = CARTESIAN_POINT('',(-0.875,1.325,2.5E-002)); +#228 = VERTEX_POINT('',#229); +#229 = CARTESIAN_POINT('',(-0.875,1.8,2.5E-002)); +#230 = LINE('',#231,#232); +#231 = CARTESIAN_POINT('',(-0.875,1.85,2.5E-002)); +#232 = VECTOR('',#233,1.); +#233 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#234 = ORIENTED_EDGE('',*,*,#235,.T.); +#235 = EDGE_CURVE('',#228,#236,#238,.T.); +#236 = VERTEX_POINT('',#237); +#237 = CARTESIAN_POINT('',(-0.625,1.8,2.5E-002)); +#238 = LINE('',#239,#240); +#239 = CARTESIAN_POINT('',(-1.6125,1.8,2.5E-002)); +#240 = VECTOR('',#241,1.); +#241 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#242 = ORIENTED_EDGE('',*,*,#243,.T.); +#243 = EDGE_CURVE('',#236,#244,#246,.T.); +#244 = VERTEX_POINT('',#245); +#245 = CARTESIAN_POINT('',(-0.625,1.325,2.5E-002)); +#246 = LINE('',#247,#248); +#247 = CARTESIAN_POINT('',(-0.625,1.6125,2.5E-002)); +#248 = VECTOR('',#249,1.); +#249 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#250 = ORIENTED_EDGE('',*,*,#251,.T.); +#251 = EDGE_CURVE('',#244,#226,#252,.T.); +#252 = LINE('',#253,#254); +#253 = CARTESIAN_POINT('',(-1.7375,1.325,2.5E-002)); +#254 = VECTOR('',#255,1.); +#255 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#256 = FACE_BOUND('',#257,.F.); +#257 = EDGE_LOOP('',(#258,#268,#276,#284)); +#258 = ORIENTED_EDGE('',*,*,#259,.T.); +#259 = EDGE_CURVE('',#260,#262,#264,.T.); +#260 = VERTEX_POINT('',#261); +#261 = CARTESIAN_POINT('',(-0.375,1.325,2.5E-002)); +#262 = VERTEX_POINT('',#263); +#263 = CARTESIAN_POINT('',(-0.375,1.8,2.5E-002)); +#264 = LINE('',#265,#266); +#265 = CARTESIAN_POINT('',(-0.375,1.85,2.5E-002)); +#266 = VECTOR('',#267,1.); +#267 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#268 = ORIENTED_EDGE('',*,*,#269,.T.); +#269 = EDGE_CURVE('',#262,#270,#272,.T.); +#270 = VERTEX_POINT('',#271); +#271 = CARTESIAN_POINT('',(-0.125,1.8,2.5E-002)); +#272 = LINE('',#273,#274); +#273 = CARTESIAN_POINT('',(-1.3625,1.8,2.5E-002)); +#274 = VECTOR('',#275,1.); +#275 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#276 = ORIENTED_EDGE('',*,*,#277,.T.); +#277 = EDGE_CURVE('',#270,#278,#280,.T.); +#278 = VERTEX_POINT('',#279); +#279 = CARTESIAN_POINT('',(-0.125,1.325,2.5E-002)); +#280 = LINE('',#281,#282); +#281 = CARTESIAN_POINT('',(-0.125,1.6125,2.5E-002)); +#282 = VECTOR('',#283,1.); +#283 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#284 = ORIENTED_EDGE('',*,*,#285,.T.); +#285 = EDGE_CURVE('',#278,#260,#286,.T.); +#286 = LINE('',#287,#288); +#287 = CARTESIAN_POINT('',(-1.4875,1.325,2.5E-002)); +#288 = VECTOR('',#289,1.); +#289 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#290 = FACE_BOUND('',#291,.F.); +#291 = EDGE_LOOP('',(#292,#302,#310,#318)); +#292 = ORIENTED_EDGE('',*,*,#293,.T.); +#293 = EDGE_CURVE('',#294,#296,#298,.T.); +#294 = VERTEX_POINT('',#295); +#295 = CARTESIAN_POINT('',(0.625,1.8,2.5E-002)); +#296 = VERTEX_POINT('',#297); +#297 = CARTESIAN_POINT('',(0.875,1.8,2.5E-002)); +#298 = LINE('',#299,#300); +#299 = CARTESIAN_POINT('',(-0.8625,1.8,2.5E-002)); +#300 = VECTOR('',#301,1.); +#301 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#302 = ORIENTED_EDGE('',*,*,#303,.T.); +#303 = EDGE_CURVE('',#296,#304,#306,.T.); +#304 = VERTEX_POINT('',#305); +#305 = CARTESIAN_POINT('',(0.875,1.325,2.5E-002)); +#306 = LINE('',#307,#308); +#307 = CARTESIAN_POINT('',(0.875,1.6125,2.5E-002)); +#308 = VECTOR('',#309,1.); +#309 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#310 = ORIENTED_EDGE('',*,*,#311,.T.); +#311 = EDGE_CURVE('',#304,#312,#314,.T.); +#312 = VERTEX_POINT('',#313); +#313 = CARTESIAN_POINT('',(0.625,1.325,2.5E-002)); +#314 = LINE('',#315,#316); +#315 = CARTESIAN_POINT('',(-0.9875,1.325,2.5E-002)); +#316 = VECTOR('',#317,1.); +#317 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#318 = ORIENTED_EDGE('',*,*,#319,.T.); +#319 = EDGE_CURVE('',#312,#294,#320,.T.); +#320 = LINE('',#321,#322); +#321 = CARTESIAN_POINT('',(0.625,1.85,2.5E-002)); +#322 = VECTOR('',#323,1.); +#323 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#324 = FACE_BOUND('',#325,.F.); +#325 = EDGE_LOOP('',(#326,#336,#344,#352)); +#326 = ORIENTED_EDGE('',*,*,#327,.T.); +#327 = EDGE_CURVE('',#328,#330,#332,.T.); +#328 = VERTEX_POINT('',#329); +#329 = CARTESIAN_POINT('',(0.375,1.8,2.5E-002)); +#330 = VERTEX_POINT('',#331); +#331 = CARTESIAN_POINT('',(0.375,1.325,2.5E-002)); +#332 = LINE('',#333,#334); +#333 = CARTESIAN_POINT('',(0.375,1.6125,2.5E-002)); +#334 = VECTOR('',#335,1.); +#335 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#336 = ORIENTED_EDGE('',*,*,#337,.T.); +#337 = EDGE_CURVE('',#330,#338,#340,.T.); +#338 = VERTEX_POINT('',#339); +#339 = CARTESIAN_POINT('',(0.125,1.325,2.5E-002)); +#340 = LINE('',#341,#342); +#341 = CARTESIAN_POINT('',(-1.2375,1.325,2.5E-002)); +#342 = VECTOR('',#343,1.); +#343 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#344 = ORIENTED_EDGE('',*,*,#345,.T.); +#345 = EDGE_CURVE('',#338,#346,#348,.T.); +#346 = VERTEX_POINT('',#347); +#347 = CARTESIAN_POINT('',(0.125,1.8,2.5E-002)); +#348 = LINE('',#349,#350); +#349 = CARTESIAN_POINT('',(0.125,1.85,2.5E-002)); +#350 = VECTOR('',#351,1.); +#351 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#352 = ORIENTED_EDGE('',*,*,#353,.T.); +#353 = EDGE_CURVE('',#346,#328,#354,.T.); +#354 = LINE('',#355,#356); +#355 = CARTESIAN_POINT('',(-1.1125,1.8,2.5E-002)); +#356 = VECTOR('',#357,1.); +#357 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#358 = FACE_BOUND('',#359,.F.); +#359 = EDGE_LOOP('',(#360,#370,#378,#386)); +#360 = ORIENTED_EDGE('',*,*,#361,.T.); +#361 = EDGE_CURVE('',#362,#364,#366,.T.); +#362 = VERTEX_POINT('',#363); +#363 = CARTESIAN_POINT('',(2.5,0.125,2.5E-002)); +#364 = VERTEX_POINT('',#365); +#365 = CARTESIAN_POINT('',(2.025,0.125,2.5E-002)); +#366 = LINE('',#367,#368); +#367 = CARTESIAN_POINT('',(-0.2875,0.125,2.5E-002)); +#368 = VECTOR('',#369,1.); +#369 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#370 = ORIENTED_EDGE('',*,*,#371,.T.); +#371 = EDGE_CURVE('',#364,#372,#374,.T.); +#372 = VERTEX_POINT('',#373); +#373 = CARTESIAN_POINT('',(2.025,0.375,2.5E-002)); +#374 = LINE('',#375,#376); +#375 = CARTESIAN_POINT('',(2.025,1.1375,2.5E-002)); +#376 = VECTOR('',#377,1.); +#377 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#378 = ORIENTED_EDGE('',*,*,#379,.T.); +#379 = EDGE_CURVE('',#372,#380,#382,.T.); +#380 = VERTEX_POINT('',#381); +#381 = CARTESIAN_POINT('',(2.5,0.375,2.5E-002)); +#382 = LINE('',#383,#384); +#383 = CARTESIAN_POINT('',(-5.E-002,0.375,2.5E-002)); +#384 = VECTOR('',#385,1.); +#385 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#386 = ORIENTED_EDGE('',*,*,#387,.T.); +#387 = EDGE_CURVE('',#380,#362,#388,.T.); +#388 = LINE('',#389,#390); +#389 = CARTESIAN_POINT('',(2.5,1.0125,2.5E-002)); +#390 = VECTOR('',#391,1.); +#391 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#392 = FACE_BOUND('',#393,.F.); +#393 = EDGE_LOOP('',(#394,#404,#412,#420)); +#394 = ORIENTED_EDGE('',*,*,#395,.T.); +#395 = EDGE_CURVE('',#396,#398,#400,.T.); +#396 = VERTEX_POINT('',#397); +#397 = CARTESIAN_POINT('',(2.5,0.875,2.5E-002)); +#398 = VERTEX_POINT('',#399); +#399 = CARTESIAN_POINT('',(2.5,0.625,2.5E-002)); +#400 = LINE('',#401,#402); +#401 = CARTESIAN_POINT('',(2.5,1.2625,2.5E-002)); +#402 = VECTOR('',#403,1.); +#403 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#404 = ORIENTED_EDGE('',*,*,#405,.T.); +#405 = EDGE_CURVE('',#398,#406,#408,.T.); +#406 = VERTEX_POINT('',#407); +#407 = CARTESIAN_POINT('',(2.025,0.625,2.5E-002)); +#408 = LINE('',#409,#410); +#409 = CARTESIAN_POINT('',(-0.2875,0.625,2.5E-002)); +#410 = VECTOR('',#411,1.); +#411 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#412 = ORIENTED_EDGE('',*,*,#413,.T.); +#413 = EDGE_CURVE('',#406,#414,#416,.T.); +#414 = VERTEX_POINT('',#415); +#415 = CARTESIAN_POINT('',(2.025,0.875,2.5E-002)); +#416 = LINE('',#417,#418); +#417 = CARTESIAN_POINT('',(2.025,1.3875,2.5E-002)); +#418 = VECTOR('',#419,1.); +#419 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#420 = ORIENTED_EDGE('',*,*,#421,.T.); +#421 = EDGE_CURVE('',#414,#396,#422,.T.); +#422 = LINE('',#423,#424); +#423 = CARTESIAN_POINT('',(-5.E-002,0.875,2.5E-002)); +#424 = VECTOR('',#425,1.); +#425 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#426 = FACE_BOUND('',#427,.F.); +#427 = EDGE_LOOP('',(#428,#438,#446,#454)); +#428 = ORIENTED_EDGE('',*,*,#429,.T.); +#429 = EDGE_CURVE('',#430,#432,#434,.T.); +#430 = VERTEX_POINT('',#431); +#431 = CARTESIAN_POINT('',(2.125,1.8,2.5E-002)); +#432 = VERTEX_POINT('',#433); +#433 = CARTESIAN_POINT('',(2.375,1.8,2.5E-002)); +#434 = LINE('',#435,#436); +#435 = CARTESIAN_POINT('',(-0.1125,1.8,2.5E-002)); +#436 = VECTOR('',#437,1.); +#437 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#438 = ORIENTED_EDGE('',*,*,#439,.T.); +#439 = EDGE_CURVE('',#432,#440,#442,.T.); +#440 = VERTEX_POINT('',#441); +#441 = CARTESIAN_POINT('',(2.375,1.325,2.5E-002)); +#442 = LINE('',#443,#444); +#443 = CARTESIAN_POINT('',(2.375,1.6125,2.5E-002)); +#444 = VECTOR('',#445,1.); +#445 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#446 = ORIENTED_EDGE('',*,*,#447,.T.); +#447 = EDGE_CURVE('',#440,#448,#450,.T.); +#448 = VERTEX_POINT('',#449); +#449 = CARTESIAN_POINT('',(2.125,1.325,2.5E-002)); +#450 = LINE('',#451,#452); +#451 = CARTESIAN_POINT('',(-0.2375,1.325,2.5E-002)); +#452 = VECTOR('',#453,1.); +#453 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#454 = ORIENTED_EDGE('',*,*,#455,.T.); +#455 = EDGE_CURVE('',#448,#430,#456,.T.); +#456 = LINE('',#457,#458); +#457 = CARTESIAN_POINT('',(2.125,1.85,2.5E-002)); +#458 = VECTOR('',#459,1.); +#459 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#460 = FACE_BOUND('',#461,.F.); +#461 = EDGE_LOOP('',(#462,#472,#480,#488)); +#462 = ORIENTED_EDGE('',*,*,#463,.T.); +#463 = EDGE_CURVE('',#464,#466,#468,.T.); +#464 = VERTEX_POINT('',#465); +#465 = CARTESIAN_POINT('',(1.875,1.325,2.5E-002)); +#466 = VERTEX_POINT('',#467); +#467 = CARTESIAN_POINT('',(1.625,1.325,2.5E-002)); +#468 = LINE('',#469,#470); +#469 = CARTESIAN_POINT('',(-0.4875,1.325,2.5E-002)); +#470 = VECTOR('',#471,1.); +#471 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#472 = ORIENTED_EDGE('',*,*,#473,.T.); +#473 = EDGE_CURVE('',#466,#474,#476,.T.); +#474 = VERTEX_POINT('',#475); +#475 = CARTESIAN_POINT('',(1.625,1.8,2.5E-002)); +#476 = LINE('',#477,#478); +#477 = CARTESIAN_POINT('',(1.625,1.85,2.5E-002)); +#478 = VECTOR('',#479,1.); +#479 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#480 = ORIENTED_EDGE('',*,*,#481,.T.); +#481 = EDGE_CURVE('',#474,#482,#484,.T.); +#482 = VERTEX_POINT('',#483); +#483 = CARTESIAN_POINT('',(1.875,1.8,2.5E-002)); +#484 = LINE('',#485,#486); +#485 = CARTESIAN_POINT('',(-0.3625,1.8,2.5E-002)); +#486 = VECTOR('',#487,1.); +#487 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#488 = ORIENTED_EDGE('',*,*,#489,.T.); +#489 = EDGE_CURVE('',#482,#464,#490,.T.); +#490 = LINE('',#491,#492); +#491 = CARTESIAN_POINT('',(1.875,1.6125,2.5E-002)); +#492 = VECTOR('',#493,1.); +#493 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#494 = FACE_BOUND('',#495,.F.); +#495 = EDGE_LOOP('',(#496,#506,#514,#522)); +#496 = ORIENTED_EDGE('',*,*,#497,.T.); +#497 = EDGE_CURVE('',#498,#500,#502,.T.); +#498 = VERTEX_POINT('',#499); +#499 = CARTESIAN_POINT('',(1.125,1.8,2.5E-002)); +#500 = VERTEX_POINT('',#501); +#501 = CARTESIAN_POINT('',(1.375,1.8,2.5E-002)); +#502 = LINE('',#503,#504); +#503 = CARTESIAN_POINT('',(-0.6125,1.8,2.5E-002)); +#504 = VECTOR('',#505,1.); +#505 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#506 = ORIENTED_EDGE('',*,*,#507,.T.); +#507 = EDGE_CURVE('',#500,#508,#510,.T.); +#508 = VERTEX_POINT('',#509); +#509 = CARTESIAN_POINT('',(1.375,1.325,2.5E-002)); +#510 = LINE('',#511,#512); +#511 = CARTESIAN_POINT('',(1.375,1.6125,2.5E-002)); +#512 = VECTOR('',#513,1.); +#513 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#514 = ORIENTED_EDGE('',*,*,#515,.T.); +#515 = EDGE_CURVE('',#508,#516,#518,.T.); +#516 = VERTEX_POINT('',#517); +#517 = CARTESIAN_POINT('',(1.125,1.325,2.5E-002)); +#518 = LINE('',#519,#520); +#519 = CARTESIAN_POINT('',(-0.7375,1.325,2.5E-002)); +#520 = VECTOR('',#521,1.); +#521 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#522 = ORIENTED_EDGE('',*,*,#523,.T.); +#523 = EDGE_CURVE('',#516,#498,#524,.T.); +#524 = LINE('',#525,#526); +#525 = CARTESIAN_POINT('',(1.125,1.85,2.5E-002)); +#526 = VECTOR('',#527,1.); +#527 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#528 = FACE_BOUND('',#529,.F.); +#529 = EDGE_LOOP('',(#530,#540,#548,#556)); +#530 = ORIENTED_EDGE('',*,*,#531,.T.); +#531 = EDGE_CURVE('',#532,#534,#536,.T.); +#532 = VERTEX_POINT('',#533); +#533 = CARTESIAN_POINT('',(2.025,-0.125,2.5E-002)); +#534 = VERTEX_POINT('',#535); +#535 = CARTESIAN_POINT('',(2.5,-0.125,2.5E-002)); +#536 = LINE('',#537,#538); +#537 = CARTESIAN_POINT('',(-5.E-002,-0.125,2.5E-002)); +#538 = VECTOR('',#539,1.); +#539 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#540 = ORIENTED_EDGE('',*,*,#541,.T.); +#541 = EDGE_CURVE('',#534,#542,#544,.T.); +#542 = VERTEX_POINT('',#543); +#543 = CARTESIAN_POINT('',(2.5,-0.375,2.5E-002)); +#544 = LINE('',#545,#546); +#545 = CARTESIAN_POINT('',(2.5,0.7625,2.5E-002)); +#546 = VECTOR('',#547,1.); +#547 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#548 = ORIENTED_EDGE('',*,*,#549,.T.); +#549 = EDGE_CURVE('',#542,#550,#552,.T.); +#550 = VERTEX_POINT('',#551); +#551 = CARTESIAN_POINT('',(2.025,-0.375,2.5E-002)); +#552 = LINE('',#553,#554); +#553 = CARTESIAN_POINT('',(-0.2875,-0.375,2.5E-002)); +#554 = VECTOR('',#555,1.); +#555 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#556 = ORIENTED_EDGE('',*,*,#557,.T.); +#557 = EDGE_CURVE('',#550,#532,#558,.T.); +#558 = LINE('',#559,#560); +#559 = CARTESIAN_POINT('',(2.025,0.8875,2.5E-002)); +#560 = VECTOR('',#561,1.); +#561 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#562 = FACE_BOUND('',#563,.F.); +#563 = EDGE_LOOP('',(#564,#574,#582,#590)); +#564 = ORIENTED_EDGE('',*,*,#565,.T.); +#565 = EDGE_CURVE('',#566,#568,#570,.T.); +#566 = VERTEX_POINT('',#567); +#567 = CARTESIAN_POINT('',(2.5,-0.625,2.5E-002)); +#568 = VERTEX_POINT('',#569); +#569 = CARTESIAN_POINT('',(2.5,-0.875,2.5E-002)); +#570 = LINE('',#571,#572); +#571 = CARTESIAN_POINT('',(2.5,0.5125,2.5E-002)); +#572 = VECTOR('',#573,1.); +#573 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#574 = ORIENTED_EDGE('',*,*,#575,.T.); +#575 = EDGE_CURVE('',#568,#576,#578,.T.); +#576 = VERTEX_POINT('',#577); +#577 = CARTESIAN_POINT('',(2.025,-0.875,2.5E-002)); +#578 = LINE('',#579,#580); +#579 = CARTESIAN_POINT('',(-0.2875,-0.875,2.5E-002)); +#580 = VECTOR('',#581,1.); +#581 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#582 = ORIENTED_EDGE('',*,*,#583,.T.); +#583 = EDGE_CURVE('',#576,#584,#586,.T.); +#584 = VERTEX_POINT('',#585); +#585 = CARTESIAN_POINT('',(2.025,-0.625,2.5E-002)); +#586 = LINE('',#587,#588); +#587 = CARTESIAN_POINT('',(2.025,0.6375,2.5E-002)); +#588 = VECTOR('',#589,1.); +#589 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#590 = ORIENTED_EDGE('',*,*,#591,.T.); +#591 = EDGE_CURVE('',#584,#566,#592,.T.); +#592 = LINE('',#593,#594); +#593 = CARTESIAN_POINT('',(-5.E-002,-0.625,2.5E-002)); +#594 = VECTOR('',#595,1.); +#595 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#596 = FACE_BOUND('',#597,.F.); +#597 = EDGE_LOOP('',(#598,#608,#616,#624)); +#598 = ORIENTED_EDGE('',*,*,#599,.T.); +#599 = EDGE_CURVE('',#600,#602,#604,.T.); +#600 = VERTEX_POINT('',#601); +#601 = CARTESIAN_POINT('',(-2.5,-0.875,2.5E-002)); +#602 = VERTEX_POINT('',#603); +#603 = CARTESIAN_POINT('',(-2.5,-0.625,2.5E-002)); +#604 = LINE('',#605,#606); +#605 = CARTESIAN_POINT('',(-2.5,0.6375,2.5E-002)); +#606 = VECTOR('',#607,1.); +#607 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#608 = ORIENTED_EDGE('',*,*,#609,.T.); +#609 = EDGE_CURVE('',#602,#610,#612,.T.); +#610 = VERTEX_POINT('',#611); +#611 = CARTESIAN_POINT('',(-2.025,-0.625,2.5E-002)); +#612 = LINE('',#613,#614); +#613 = CARTESIAN_POINT('',(-2.3125,-0.625,2.5E-002)); +#614 = VECTOR('',#615,1.); +#615 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#616 = ORIENTED_EDGE('',*,*,#617,.T.); +#617 = EDGE_CURVE('',#610,#618,#620,.T.); +#618 = VERTEX_POINT('',#619); +#619 = CARTESIAN_POINT('',(-2.025,-0.875,2.5E-002)); +#620 = LINE('',#621,#622); +#621 = CARTESIAN_POINT('',(-2.025,0.5125,2.5E-002)); +#622 = VECTOR('',#623,1.); +#623 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#624 = ORIENTED_EDGE('',*,*,#625,.T.); +#625 = EDGE_CURVE('',#618,#600,#626,.T.); +#626 = LINE('',#627,#628); +#627 = CARTESIAN_POINT('',(-2.55,-0.875,2.5E-002)); +#628 = VECTOR('',#629,1.); +#629 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#630 = FACE_BOUND('',#631,.F.); +#631 = EDGE_LOOP('',(#632,#642,#650,#658)); +#632 = ORIENTED_EDGE('',*,*,#633,.T.); +#633 = EDGE_CURVE('',#634,#636,#638,.T.); +#634 = VERTEX_POINT('',#635); +#635 = CARTESIAN_POINT('',(-2.5,0.375,2.5E-002)); +#636 = VERTEX_POINT('',#637); +#637 = CARTESIAN_POINT('',(-2.025,0.375,2.5E-002)); +#638 = LINE('',#639,#640); +#639 = CARTESIAN_POINT('',(-2.3125,0.375,2.5E-002)); +#640 = VECTOR('',#641,1.); +#641 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#642 = ORIENTED_EDGE('',*,*,#643,.T.); +#643 = EDGE_CURVE('',#636,#644,#646,.T.); +#644 = VERTEX_POINT('',#645); +#645 = CARTESIAN_POINT('',(-2.025,0.125,2.5E-002)); +#646 = LINE('',#647,#648); +#647 = CARTESIAN_POINT('',(-2.025,1.0125,2.5E-002)); +#648 = VECTOR('',#649,1.); +#649 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#650 = ORIENTED_EDGE('',*,*,#651,.T.); +#651 = EDGE_CURVE('',#644,#652,#654,.T.); +#652 = VERTEX_POINT('',#653); +#653 = CARTESIAN_POINT('',(-2.5,0.125,2.5E-002)); +#654 = LINE('',#655,#656); +#655 = CARTESIAN_POINT('',(-2.55,0.125,2.5E-002)); +#656 = VECTOR('',#657,1.); +#657 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#658 = ORIENTED_EDGE('',*,*,#659,.T.); +#659 = EDGE_CURVE('',#652,#634,#660,.T.); +#660 = LINE('',#661,#662); +#661 = CARTESIAN_POINT('',(-2.5,1.1375,2.5E-002)); +#662 = VECTOR('',#663,1.); +#663 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#664 = FACE_BOUND('',#665,.F.); +#665 = EDGE_LOOP('',(#666,#676,#684,#692)); +#666 = ORIENTED_EDGE('',*,*,#667,.T.); +#667 = EDGE_CURVE('',#668,#670,#672,.T.); +#668 = VERTEX_POINT('',#669); +#669 = CARTESIAN_POINT('',(-2.025,-0.125,2.5E-002)); +#670 = VERTEX_POINT('',#671); +#671 = CARTESIAN_POINT('',(-2.025,-0.375,2.5E-002)); +#672 = LINE('',#673,#674); +#673 = CARTESIAN_POINT('',(-2.025,0.7625,2.5E-002)); +#674 = VECTOR('',#675,1.); +#675 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#676 = ORIENTED_EDGE('',*,*,#677,.T.); +#677 = EDGE_CURVE('',#670,#678,#680,.T.); +#678 = VERTEX_POINT('',#679); +#679 = CARTESIAN_POINT('',(-2.5,-0.375,2.5E-002)); +#680 = LINE('',#681,#682); +#681 = CARTESIAN_POINT('',(-2.55,-0.375,2.5E-002)); +#682 = VECTOR('',#683,1.); +#683 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#684 = ORIENTED_EDGE('',*,*,#685,.T.); +#685 = EDGE_CURVE('',#678,#686,#688,.T.); +#686 = VERTEX_POINT('',#687); +#687 = CARTESIAN_POINT('',(-2.5,-0.125,2.5E-002)); +#688 = LINE('',#689,#690); +#689 = CARTESIAN_POINT('',(-2.5,0.8875,2.5E-002)); +#690 = VECTOR('',#691,1.); +#691 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#692 = ORIENTED_EDGE('',*,*,#693,.T.); +#693 = EDGE_CURVE('',#686,#668,#694,.T.); +#694 = LINE('',#695,#696); +#695 = CARTESIAN_POINT('',(-2.3125,-0.125,2.5E-002)); +#696 = VECTOR('',#697,1.); +#697 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#698 = FACE_BOUND('',#699,.F.); +#699 = EDGE_LOOP('',(#700,#701,#702,#703)); +#700 = ORIENTED_EDGE('',*,*,#70,.T.); +#701 = ORIENTED_EDGE('',*,*,#142,.T.); +#702 = ORIENTED_EDGE('',*,*,#118,.T.); +#703 = ORIENTED_EDGE('',*,*,#94,.T.); +#704 = FACE_BOUND('',#705,.F.); +#705 = EDGE_LOOP('',(#706,#716,#724,#732)); +#706 = ORIENTED_EDGE('',*,*,#707,.T.); +#707 = EDGE_CURVE('',#708,#710,#712,.T.); +#708 = VERTEX_POINT('',#709); +#709 = CARTESIAN_POINT('',(-2.5,0.875,2.5E-002)); +#710 = VERTEX_POINT('',#711); +#711 = CARTESIAN_POINT('',(-2.025,0.875,2.5E-002)); +#712 = LINE('',#713,#714); +#713 = CARTESIAN_POINT('',(-2.3125,0.875,2.5E-002)); +#714 = VECTOR('',#715,1.); +#715 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#716 = ORIENTED_EDGE('',*,*,#717,.T.); +#717 = EDGE_CURVE('',#710,#718,#720,.T.); +#718 = VERTEX_POINT('',#719); +#719 = CARTESIAN_POINT('',(-2.025,0.625,2.5E-002)); +#720 = LINE('',#721,#722); +#721 = CARTESIAN_POINT('',(-2.025,1.2625,2.5E-002)); +#722 = VECTOR('',#723,1.); +#723 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#724 = ORIENTED_EDGE('',*,*,#725,.T.); +#725 = EDGE_CURVE('',#718,#726,#728,.T.); +#726 = VERTEX_POINT('',#727); +#727 = CARTESIAN_POINT('',(-2.5,0.625,2.5E-002)); +#728 = LINE('',#729,#730); +#729 = CARTESIAN_POINT('',(-2.55,0.625,2.5E-002)); +#730 = VECTOR('',#731,1.); +#731 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#732 = ORIENTED_EDGE('',*,*,#733,.T.); +#733 = EDGE_CURVE('',#726,#708,#734,.T.); +#734 = LINE('',#735,#736); +#735 = CARTESIAN_POINT('',(-2.5,1.3875,2.5E-002)); +#736 = VECTOR('',#737,1.); +#737 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#738 = FACE_BOUND('',#739,.F.); +#739 = EDGE_LOOP('',(#740,#750,#758,#766)); +#740 = ORIENTED_EDGE('',*,*,#741,.T.); +#741 = EDGE_CURVE('',#742,#744,#746,.T.); +#742 = VERTEX_POINT('',#743); +#743 = CARTESIAN_POINT('',(-1.875,1.8,2.5E-002)); +#744 = VERTEX_POINT('',#745); +#745 = CARTESIAN_POINT('',(-1.625,1.8,2.5E-002)); +#746 = LINE('',#747,#748); +#747 = CARTESIAN_POINT('',(-2.1125,1.8,2.5E-002)); +#748 = VECTOR('',#749,1.); +#749 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#750 = ORIENTED_EDGE('',*,*,#751,.T.); +#751 = EDGE_CURVE('',#744,#752,#754,.T.); +#752 = VERTEX_POINT('',#753); +#753 = CARTESIAN_POINT('',(-1.625,1.325,2.5E-002)); +#754 = LINE('',#755,#756); +#755 = CARTESIAN_POINT('',(-1.625,1.6125,2.5E-002)); +#756 = VECTOR('',#757,1.); +#757 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#758 = ORIENTED_EDGE('',*,*,#759,.T.); +#759 = EDGE_CURVE('',#752,#760,#762,.T.); +#760 = VERTEX_POINT('',#761); +#761 = CARTESIAN_POINT('',(-1.875,1.325,2.5E-002)); +#762 = LINE('',#763,#764); +#763 = CARTESIAN_POINT('',(-2.2375,1.325,2.5E-002)); +#764 = VECTOR('',#765,1.); +#765 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#766 = ORIENTED_EDGE('',*,*,#767,.T.); +#767 = EDGE_CURVE('',#760,#742,#768,.T.); +#768 = LINE('',#769,#770); +#769 = CARTESIAN_POINT('',(-1.875,1.85,2.5E-002)); +#770 = VECTOR('',#771,1.); +#771 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#772 = FACE_BOUND('',#773,.F.); +#773 = EDGE_LOOP('',(#774,#784,#792,#800)); +#774 = ORIENTED_EDGE('',*,*,#775,.T.); +#775 = EDGE_CURVE('',#776,#778,#780,.T.); +#776 = VERTEX_POINT('',#777); +#777 = CARTESIAN_POINT('',(-1.625,-1.8,2.5E-002)); +#778 = VERTEX_POINT('',#779); +#779 = CARTESIAN_POINT('',(-1.875,-1.8,2.5E-002)); +#780 = LINE('',#781,#782); +#781 = CARTESIAN_POINT('',(-2.2375,-1.8,2.5E-002)); +#782 = VECTOR('',#783,1.); +#783 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#784 = ORIENTED_EDGE('',*,*,#785,.T.); +#785 = EDGE_CURVE('',#778,#786,#788,.T.); +#786 = VERTEX_POINT('',#787); +#787 = CARTESIAN_POINT('',(-1.875,-1.325,2.5E-002)); +#788 = LINE('',#789,#790); +#789 = CARTESIAN_POINT('',(-1.875,0.2875,2.5E-002)); +#790 = VECTOR('',#791,1.); +#791 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#792 = ORIENTED_EDGE('',*,*,#793,.T.); +#793 = EDGE_CURVE('',#786,#794,#796,.T.); +#794 = VERTEX_POINT('',#795); +#795 = CARTESIAN_POINT('',(-1.625,-1.325,2.5E-002)); +#796 = LINE('',#797,#798); +#797 = CARTESIAN_POINT('',(-2.1125,-1.325,2.5E-002)); +#798 = VECTOR('',#799,1.); +#799 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#800 = ORIENTED_EDGE('',*,*,#801,.T.); +#801 = EDGE_CURVE('',#794,#776,#802,.T.); +#802 = LINE('',#803,#804); +#803 = CARTESIAN_POINT('',(-1.625,5.E-002,2.5E-002)); +#804 = VECTOR('',#805,1.); +#805 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#806 = FACE_BOUND('',#807,.F.); +#807 = EDGE_LOOP('',(#808,#818,#826,#834)); +#808 = ORIENTED_EDGE('',*,*,#809,.T.); +#809 = EDGE_CURVE('',#810,#812,#814,.T.); +#810 = VERTEX_POINT('',#811); +#811 = CARTESIAN_POINT('',(-1.125,-1.325,2.5E-002)); +#812 = VERTEX_POINT('',#813); +#813 = CARTESIAN_POINT('',(-1.125,-1.8,2.5E-002)); +#814 = LINE('',#815,#816); +#815 = CARTESIAN_POINT('',(-1.125,5.E-002,2.5E-002)); +#816 = VECTOR('',#817,1.); +#817 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#818 = ORIENTED_EDGE('',*,*,#819,.T.); +#819 = EDGE_CURVE('',#812,#820,#822,.T.); +#820 = VERTEX_POINT('',#821); +#821 = CARTESIAN_POINT('',(-1.375,-1.8,2.5E-002)); +#822 = LINE('',#823,#824); +#823 = CARTESIAN_POINT('',(-1.9875,-1.8,2.5E-002)); +#824 = VECTOR('',#825,1.); +#825 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#826 = ORIENTED_EDGE('',*,*,#827,.T.); +#827 = EDGE_CURVE('',#820,#828,#830,.T.); +#828 = VERTEX_POINT('',#829); +#829 = CARTESIAN_POINT('',(-1.375,-1.325,2.5E-002)); +#830 = LINE('',#831,#832); +#831 = CARTESIAN_POINT('',(-1.375,0.2875,2.5E-002)); +#832 = VECTOR('',#833,1.); +#833 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#834 = ORIENTED_EDGE('',*,*,#835,.T.); +#835 = EDGE_CURVE('',#828,#810,#836,.T.); +#836 = LINE('',#837,#838); +#837 = CARTESIAN_POINT('',(-1.8625,-1.325,2.5E-002)); +#838 = VECTOR('',#839,1.); +#839 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#840 = FACE_BOUND('',#841,.F.); +#841 = EDGE_LOOP('',(#842,#852,#860,#868)); +#842 = ORIENTED_EDGE('',*,*,#843,.T.); +#843 = EDGE_CURVE('',#844,#846,#848,.T.); +#844 = VERTEX_POINT('',#845); +#845 = CARTESIAN_POINT('',(-0.625,-1.325,2.5E-002)); +#846 = VERTEX_POINT('',#847); +#847 = CARTESIAN_POINT('',(-0.625,-1.8,2.5E-002)); +#848 = LINE('',#849,#850); +#849 = CARTESIAN_POINT('',(-0.625,5.E-002,2.5E-002)); +#850 = VECTOR('',#851,1.); +#851 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#852 = ORIENTED_EDGE('',*,*,#853,.T.); +#853 = EDGE_CURVE('',#846,#854,#856,.T.); +#854 = VERTEX_POINT('',#855); +#855 = CARTESIAN_POINT('',(-0.875,-1.8,2.5E-002)); +#856 = LINE('',#857,#858); +#857 = CARTESIAN_POINT('',(-1.7375,-1.8,2.5E-002)); +#858 = VECTOR('',#859,1.); +#859 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#860 = ORIENTED_EDGE('',*,*,#861,.T.); +#861 = EDGE_CURVE('',#854,#862,#864,.T.); +#862 = VERTEX_POINT('',#863); +#863 = CARTESIAN_POINT('',(-0.875,-1.325,2.5E-002)); +#864 = LINE('',#865,#866); +#865 = CARTESIAN_POINT('',(-0.875,0.2875,2.5E-002)); +#866 = VECTOR('',#867,1.); +#867 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#868 = ORIENTED_EDGE('',*,*,#869,.T.); +#869 = EDGE_CURVE('',#862,#844,#870,.T.); +#870 = LINE('',#871,#872); +#871 = CARTESIAN_POINT('',(-1.6125,-1.325,2.5E-002)); +#872 = VECTOR('',#873,1.); +#873 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#874 = FACE_BOUND('',#875,.F.); +#875 = EDGE_LOOP('',(#876,#886,#894,#902)); +#876 = ORIENTED_EDGE('',*,*,#877,.T.); +#877 = EDGE_CURVE('',#878,#880,#882,.T.); +#878 = VERTEX_POINT('',#879); +#879 = CARTESIAN_POINT('',(-0.375,-1.8,2.5E-002)); +#880 = VERTEX_POINT('',#881); +#881 = CARTESIAN_POINT('',(-0.375,-1.325,2.5E-002)); +#882 = LINE('',#883,#884); +#883 = CARTESIAN_POINT('',(-0.375,0.2875,2.5E-002)); +#884 = VECTOR('',#885,1.); +#885 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#886 = ORIENTED_EDGE('',*,*,#887,.T.); +#887 = EDGE_CURVE('',#880,#888,#890,.T.); +#888 = VERTEX_POINT('',#889); +#889 = CARTESIAN_POINT('',(-0.125,-1.325,2.5E-002)); +#890 = LINE('',#891,#892); +#891 = CARTESIAN_POINT('',(-1.3625,-1.325,2.5E-002)); +#892 = VECTOR('',#893,1.); +#893 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#894 = ORIENTED_EDGE('',*,*,#895,.T.); +#895 = EDGE_CURVE('',#888,#896,#898,.T.); +#896 = VERTEX_POINT('',#897); +#897 = CARTESIAN_POINT('',(-0.125,-1.8,2.5E-002)); +#898 = LINE('',#899,#900); +#899 = CARTESIAN_POINT('',(-0.125,5.E-002,2.5E-002)); +#900 = VECTOR('',#901,1.); +#901 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#902 = ORIENTED_EDGE('',*,*,#903,.T.); +#903 = EDGE_CURVE('',#896,#878,#904,.T.); +#904 = LINE('',#905,#906); +#905 = CARTESIAN_POINT('',(-1.4875,-1.8,2.5E-002)); +#906 = VECTOR('',#907,1.); +#907 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#908 = FACE_BOUND('',#909,.F.); +#909 = EDGE_LOOP('',(#910,#920,#928,#936)); +#910 = ORIENTED_EDGE('',*,*,#911,.T.); +#911 = EDGE_CURVE('',#912,#914,#916,.T.); +#912 = VERTEX_POINT('',#913); +#913 = CARTESIAN_POINT('',(1.125,-1.325,2.5E-002)); +#914 = VERTEX_POINT('',#915); +#915 = CARTESIAN_POINT('',(1.375,-1.325,2.5E-002)); +#916 = LINE('',#917,#918); +#917 = CARTESIAN_POINT('',(-0.6125,-1.325,2.5E-002)); +#918 = VECTOR('',#919,1.); +#919 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#920 = ORIENTED_EDGE('',*,*,#921,.T.); +#921 = EDGE_CURVE('',#914,#922,#924,.T.); +#922 = VERTEX_POINT('',#923); +#923 = CARTESIAN_POINT('',(1.375,-1.8,2.5E-002)); +#924 = LINE('',#925,#926); +#925 = CARTESIAN_POINT('',(1.375,5.E-002,2.5E-002)); +#926 = VECTOR('',#927,1.); +#927 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#928 = ORIENTED_EDGE('',*,*,#929,.T.); +#929 = EDGE_CURVE('',#922,#930,#932,.T.); +#930 = VERTEX_POINT('',#931); +#931 = CARTESIAN_POINT('',(1.125,-1.8,2.5E-002)); +#932 = LINE('',#933,#934); +#933 = CARTESIAN_POINT('',(-0.7375,-1.8,2.5E-002)); +#934 = VECTOR('',#935,1.); +#935 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#936 = ORIENTED_EDGE('',*,*,#937,.T.); +#937 = EDGE_CURVE('',#930,#912,#938,.T.); +#938 = LINE('',#939,#940); +#939 = CARTESIAN_POINT('',(1.125,0.2875,2.5E-002)); +#940 = VECTOR('',#941,1.); +#941 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#942 = FACE_BOUND('',#943,.F.); +#943 = EDGE_LOOP('',(#944,#954,#962,#970)); +#944 = ORIENTED_EDGE('',*,*,#945,.T.); +#945 = EDGE_CURVE('',#946,#948,#950,.T.); +#946 = VERTEX_POINT('',#947); +#947 = CARTESIAN_POINT('',(0.875,-1.325,2.5E-002)); +#948 = VERTEX_POINT('',#949); +#949 = CARTESIAN_POINT('',(0.875,-1.8,2.5E-002)); +#950 = LINE('',#951,#952); +#951 = CARTESIAN_POINT('',(0.875,5.E-002,2.5E-002)); +#952 = VECTOR('',#953,1.); +#953 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#954 = ORIENTED_EDGE('',*,*,#955,.T.); +#955 = EDGE_CURVE('',#948,#956,#958,.T.); +#956 = VERTEX_POINT('',#957); +#957 = CARTESIAN_POINT('',(0.625,-1.8,2.5E-002)); +#958 = LINE('',#959,#960); +#959 = CARTESIAN_POINT('',(-0.9875,-1.8,2.5E-002)); +#960 = VECTOR('',#961,1.); +#961 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#962 = ORIENTED_EDGE('',*,*,#963,.T.); +#963 = EDGE_CURVE('',#956,#964,#966,.T.); +#964 = VERTEX_POINT('',#965); +#965 = CARTESIAN_POINT('',(0.625,-1.325,2.5E-002)); +#966 = LINE('',#967,#968); +#967 = CARTESIAN_POINT('',(0.625,0.2875,2.5E-002)); +#968 = VECTOR('',#969,1.); +#969 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#970 = ORIENTED_EDGE('',*,*,#971,.T.); +#971 = EDGE_CURVE('',#964,#946,#972,.T.); +#972 = LINE('',#973,#974); +#973 = CARTESIAN_POINT('',(-0.8625,-1.325,2.5E-002)); +#974 = VECTOR('',#975,1.); +#975 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#976 = FACE_BOUND('',#977,.F.); +#977 = EDGE_LOOP('',(#978,#988,#996,#1004)); +#978 = ORIENTED_EDGE('',*,*,#979,.T.); +#979 = EDGE_CURVE('',#980,#982,#984,.T.); +#980 = VERTEX_POINT('',#981); +#981 = CARTESIAN_POINT('',(0.125,-1.325,2.5E-002)); +#982 = VERTEX_POINT('',#983); +#983 = CARTESIAN_POINT('',(0.375,-1.325,2.5E-002)); +#984 = LINE('',#985,#986); +#985 = CARTESIAN_POINT('',(-1.1125,-1.325,2.5E-002)); +#986 = VECTOR('',#987,1.); +#987 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#988 = ORIENTED_EDGE('',*,*,#989,.T.); +#989 = EDGE_CURVE('',#982,#990,#992,.T.); +#990 = VERTEX_POINT('',#991); +#991 = CARTESIAN_POINT('',(0.375,-1.8,2.5E-002)); +#992 = LINE('',#993,#994); +#993 = CARTESIAN_POINT('',(0.375,5.E-002,2.5E-002)); +#994 = VECTOR('',#995,1.); +#995 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#996 = ORIENTED_EDGE('',*,*,#997,.T.); +#997 = EDGE_CURVE('',#990,#998,#1000,.T.); +#998 = VERTEX_POINT('',#999); +#999 = CARTESIAN_POINT('',(0.125,-1.8,2.5E-002)); +#1000 = LINE('',#1001,#1002); +#1001 = CARTESIAN_POINT('',(-1.2375,-1.8,2.5E-002)); +#1002 = VECTOR('',#1003,1.); +#1003 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#1004 = ORIENTED_EDGE('',*,*,#1005,.T.); +#1005 = EDGE_CURVE('',#998,#980,#1006,.T.); +#1006 = LINE('',#1007,#1008); +#1007 = CARTESIAN_POINT('',(0.125,0.2875,2.5E-002)); +#1008 = VECTOR('',#1009,1.); +#1009 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#1010 = FACE_BOUND('',#1011,.F.); +#1011 = EDGE_LOOP('',(#1012,#1022,#1030,#1038)); +#1012 = ORIENTED_EDGE('',*,*,#1013,.T.); +#1013 = EDGE_CURVE('',#1014,#1016,#1018,.T.); +#1014 = VERTEX_POINT('',#1015); +#1015 = CARTESIAN_POINT('',(2.375,-1.8,2.5E-002)); +#1016 = VERTEX_POINT('',#1017); +#1017 = CARTESIAN_POINT('',(2.125,-1.8,2.5E-002)); +#1018 = LINE('',#1019,#1020); +#1019 = CARTESIAN_POINT('',(-0.2375,-1.8,2.5E-002)); +#1020 = VECTOR('',#1021,1.); +#1021 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#1022 = ORIENTED_EDGE('',*,*,#1023,.T.); +#1023 = EDGE_CURVE('',#1016,#1024,#1026,.T.); +#1024 = VERTEX_POINT('',#1025); +#1025 = CARTESIAN_POINT('',(2.125,-1.325,2.5E-002)); +#1026 = LINE('',#1027,#1028); +#1027 = CARTESIAN_POINT('',(2.125,0.2875,2.5E-002)); +#1028 = VECTOR('',#1029,1.); +#1029 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#1030 = ORIENTED_EDGE('',*,*,#1031,.T.); +#1031 = EDGE_CURVE('',#1024,#1032,#1034,.T.); +#1032 = VERTEX_POINT('',#1033); +#1033 = CARTESIAN_POINT('',(2.375,-1.325,2.5E-002)); +#1034 = LINE('',#1035,#1036); +#1035 = CARTESIAN_POINT('',(-0.1125,-1.325,2.5E-002)); +#1036 = VECTOR('',#1037,1.); +#1037 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#1038 = ORIENTED_EDGE('',*,*,#1039,.T.); +#1039 = EDGE_CURVE('',#1032,#1014,#1040,.T.); +#1040 = LINE('',#1041,#1042); +#1041 = CARTESIAN_POINT('',(2.375,5.E-002,2.5E-002)); +#1042 = VECTOR('',#1043,1.); +#1043 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#1044 = FACE_BOUND('',#1045,.F.); +#1045 = EDGE_LOOP('',(#1046,#1056,#1064,#1072)); +#1046 = ORIENTED_EDGE('',*,*,#1047,.T.); +#1047 = EDGE_CURVE('',#1048,#1050,#1052,.T.); +#1048 = VERTEX_POINT('',#1049); +#1049 = CARTESIAN_POINT('',(1.875,-1.325,2.5E-002)); +#1050 = VERTEX_POINT('',#1051); +#1051 = CARTESIAN_POINT('',(1.875,-1.8,2.5E-002)); +#1052 = LINE('',#1053,#1054); +#1053 = CARTESIAN_POINT('',(1.875,5.E-002,2.5E-002)); +#1054 = VECTOR('',#1055,1.); +#1055 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#1056 = ORIENTED_EDGE('',*,*,#1057,.T.); +#1057 = EDGE_CURVE('',#1050,#1058,#1060,.T.); +#1058 = VERTEX_POINT('',#1059); +#1059 = CARTESIAN_POINT('',(1.625,-1.8,2.5E-002)); +#1060 = LINE('',#1061,#1062); +#1061 = CARTESIAN_POINT('',(-0.4875,-1.8,2.5E-002)); +#1062 = VECTOR('',#1063,1.); +#1063 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#1064 = ORIENTED_EDGE('',*,*,#1065,.T.); +#1065 = EDGE_CURVE('',#1058,#1066,#1068,.T.); +#1066 = VERTEX_POINT('',#1067); +#1067 = CARTESIAN_POINT('',(1.625,-1.325,2.5E-002)); +#1068 = LINE('',#1069,#1070); +#1069 = CARTESIAN_POINT('',(1.625,0.2875,2.5E-002)); +#1070 = VECTOR('',#1071,1.); +#1071 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#1072 = ORIENTED_EDGE('',*,*,#1073,.T.); +#1073 = EDGE_CURVE('',#1066,#1048,#1074,.T.); +#1074 = LINE('',#1075,#1076); +#1075 = CARTESIAN_POINT('',(-0.3625,-1.325,2.5E-002)); +#1076 = VECTOR('',#1077,1.); +#1077 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#1078 = FACE_BOUND('',#1079,.F.); +#1079 = EDGE_LOOP('',(#1080,#1090,#1098,#1106)); +#1080 = ORIENTED_EDGE('',*,*,#1081,.T.); +#1081 = EDGE_CURVE('',#1082,#1084,#1086,.T.); +#1082 = VERTEX_POINT('',#1083); +#1083 = CARTESIAN_POINT('',(-2.125,-1.8,2.5E-002)); +#1084 = VERTEX_POINT('',#1085); +#1085 = CARTESIAN_POINT('',(-2.375,-1.8,2.5E-002)); +#1086 = LINE('',#1087,#1088); +#1087 = CARTESIAN_POINT('',(-2.4875,-1.8,2.5E-002)); +#1088 = VECTOR('',#1089,1.); +#1089 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#1090 = ORIENTED_EDGE('',*,*,#1091,.T.); +#1091 = EDGE_CURVE('',#1084,#1092,#1094,.T.); +#1092 = VERTEX_POINT('',#1093); +#1093 = CARTESIAN_POINT('',(-2.375,-1.325,2.5E-002)); +#1094 = LINE('',#1095,#1096); +#1095 = CARTESIAN_POINT('',(-2.375,0.2875,2.5E-002)); +#1096 = VECTOR('',#1097,1.); +#1097 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#1098 = ORIENTED_EDGE('',*,*,#1099,.T.); +#1099 = EDGE_CURVE('',#1092,#1100,#1102,.T.); +#1100 = VERTEX_POINT('',#1101); +#1101 = CARTESIAN_POINT('',(-2.125,-1.325,2.5E-002)); +#1102 = LINE('',#1103,#1104); +#1103 = CARTESIAN_POINT('',(-2.3625,-1.325,2.5E-002)); +#1104 = VECTOR('',#1105,1.); +#1105 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#1106 = ORIENTED_EDGE('',*,*,#1107,.T.); +#1107 = EDGE_CURVE('',#1100,#1082,#1108,.T.); +#1108 = LINE('',#1109,#1110); +#1109 = CARTESIAN_POINT('',(-2.125,5.E-002,2.5E-002)); +#1110 = VECTOR('',#1111,1.); +#1111 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#1112 = PLANE('',#1113); +#1113 = AXIS2_PLACEMENT_3D('',#1114,#1115,#1116); +#1114 = CARTESIAN_POINT('',(-2.6,1.9,2.5E-002)); +#1115 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1116 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1117 = ADVANCED_FACE('',(#1118),#1143,.F.); +#1118 = FACE_BOUND('',#1119,.F.); +#1119 = EDGE_LOOP('',(#1120,#1128,#1129,#1137)); +#1120 = ORIENTED_EDGE('',*,*,#1121,.F.); +#1121 = EDGE_CURVE('',#158,#1122,#1124,.T.); +#1122 = VERTEX_POINT('',#1123); +#1123 = CARTESIAN_POINT('',(-2.6,1.9,1.025)); +#1124 = LINE('',#1125,#1126); +#1125 = CARTESIAN_POINT('',(-2.6,1.9,2.5E-002)); +#1126 = VECTOR('',#1127,1.); +#1127 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1128 = ORIENTED_EDGE('',*,*,#157,.T.); +#1129 = ORIENTED_EDGE('',*,*,#1130,.T.); +#1130 = EDGE_CURVE('',#160,#1131,#1133,.T.); +#1131 = VERTEX_POINT('',#1132); +#1132 = CARTESIAN_POINT('',(2.6,1.9,1.025)); +#1133 = LINE('',#1134,#1135); +#1134 = CARTESIAN_POINT('',(2.6,1.9,2.5E-002)); +#1135 = VECTOR('',#1136,1.); +#1136 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1137 = ORIENTED_EDGE('',*,*,#1138,.F.); +#1138 = EDGE_CURVE('',#1122,#1131,#1139,.T.); +#1139 = LINE('',#1140,#1141); +#1140 = CARTESIAN_POINT('',(-2.6,1.9,1.025)); +#1141 = VECTOR('',#1142,1.); +#1142 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#1143 = PLANE('',#1144); +#1144 = AXIS2_PLACEMENT_3D('',#1145,#1146,#1147); +#1145 = CARTESIAN_POINT('',(-2.6,1.9,2.5E-002)); +#1146 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1147 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1148 = ADVANCED_FACE('',(#1149),#1167,.T.); +#1149 = FACE_BOUND('',#1150,.T.); +#1150 = EDGE_LOOP('',(#1151,#1152,#1153,#1161)); +#1151 = ORIENTED_EDGE('',*,*,#183,.F.); +#1152 = ORIENTED_EDGE('',*,*,#1130,.T.); +#1153 = ORIENTED_EDGE('',*,*,#1154,.T.); +#1154 = EDGE_CURVE('',#1131,#1155,#1157,.T.); +#1155 = VERTEX_POINT('',#1156); +#1156 = CARTESIAN_POINT('',(2.6,-1.9,1.025)); +#1157 = LINE('',#1158,#1159); +#1158 = CARTESIAN_POINT('',(2.6,1.9,1.025)); +#1159 = VECTOR('',#1160,1.); +#1160 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1161 = ORIENTED_EDGE('',*,*,#1162,.F.); +#1162 = EDGE_CURVE('',#176,#1155,#1163,.T.); +#1163 = LINE('',#1164,#1165); +#1164 = CARTESIAN_POINT('',(2.6,-1.9,2.5E-002)); +#1165 = VECTOR('',#1166,1.); +#1166 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1167 = PLANE('',#1168); +#1168 = AXIS2_PLACEMENT_3D('',#1169,#1170,#1171); +#1169 = CARTESIAN_POINT('',(2.6,1.9,2.5E-002)); +#1170 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#1171 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1172 = ADVANCED_FACE('',(#1173),#1191,.F.); +#1173 = FACE_BOUND('',#1174,.F.); +#1174 = EDGE_LOOP('',(#1175,#1176,#1177,#1185)); +#1175 = ORIENTED_EDGE('',*,*,#167,.F.); +#1176 = ORIENTED_EDGE('',*,*,#1121,.T.); +#1177 = ORIENTED_EDGE('',*,*,#1178,.T.); +#1178 = EDGE_CURVE('',#1122,#1179,#1181,.T.); +#1179 = VERTEX_POINT('',#1180); +#1180 = CARTESIAN_POINT('',(-2.6,-1.9,1.025)); +#1181 = LINE('',#1182,#1183); +#1182 = CARTESIAN_POINT('',(-2.6,1.9,1.025)); +#1183 = VECTOR('',#1184,1.); +#1184 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1185 = ORIENTED_EDGE('',*,*,#1186,.F.); +#1186 = EDGE_CURVE('',#168,#1179,#1187,.T.); +#1187 = LINE('',#1188,#1189); +#1188 = CARTESIAN_POINT('',(-2.6,-1.9,2.5E-002)); +#1189 = VECTOR('',#1190,1.); +#1190 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1191 = PLANE('',#1192); +#1192 = AXIS2_PLACEMENT_3D('',#1193,#1194,#1195); +#1193 = CARTESIAN_POINT('',(-2.6,1.9,2.5E-002)); +#1194 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#1195 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1196 = ADVANCED_FACE('',(#1197),#1208,.T.); +#1197 = FACE_BOUND('',#1198,.T.); +#1198 = EDGE_LOOP('',(#1199,#1200,#1201,#1202)); +#1199 = ORIENTED_EDGE('',*,*,#1186,.F.); +#1200 = ORIENTED_EDGE('',*,*,#175,.T.); +#1201 = ORIENTED_EDGE('',*,*,#1162,.T.); +#1202 = ORIENTED_EDGE('',*,*,#1203,.F.); +#1203 = EDGE_CURVE('',#1179,#1155,#1204,.T.); +#1204 = LINE('',#1205,#1206); +#1205 = CARTESIAN_POINT('',(-2.6,-1.9,1.025)); +#1206 = VECTOR('',#1207,1.); +#1207 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#1208 = PLANE('',#1209); +#1209 = AXIS2_PLACEMENT_3D('',#1210,#1211,#1212); +#1210 = CARTESIAN_POINT('',(-2.6,-1.9,2.5E-002)); +#1211 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1212 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1213 = ADVANCED_FACE('',(#1214),#1239,.F.); +#1214 = FACE_BOUND('',#1215,.F.); +#1215 = EDGE_LOOP('',(#1216,#1226,#1232,#1233)); +#1216 = ORIENTED_EDGE('',*,*,#1217,.F.); +#1217 = EDGE_CURVE('',#1218,#1220,#1222,.T.); +#1218 = VERTEX_POINT('',#1219); +#1219 = CARTESIAN_POINT('',(-1.375,1.325,0.E+000)); +#1220 = VERTEX_POINT('',#1221); +#1221 = CARTESIAN_POINT('',(-1.125,1.325,0.E+000)); +#1222 = LINE('',#1223,#1224); +#1223 = CARTESIAN_POINT('',(-1.375,1.325,0.E+000)); +#1224 = VECTOR('',#1225,1.); +#1225 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1226 = ORIENTED_EDGE('',*,*,#1227,.T.); +#1227 = EDGE_CURVE('',#1218,#194,#1228,.T.); +#1228 = LINE('',#1229,#1230); +#1229 = CARTESIAN_POINT('',(-1.375,1.325,0.E+000)); +#1230 = VECTOR('',#1231,1.); +#1231 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1232 = ORIENTED_EDGE('',*,*,#191,.F.); +#1233 = ORIENTED_EDGE('',*,*,#1234,.F.); +#1234 = EDGE_CURVE('',#1220,#192,#1235,.T.); +#1235 = LINE('',#1236,#1237); +#1236 = CARTESIAN_POINT('',(-1.125,1.325,0.E+000)); +#1237 = VECTOR('',#1238,1.); +#1238 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1239 = PLANE('',#1240); +#1240 = AXIS2_PLACEMENT_3D('',#1241,#1242,#1243); +#1241 = CARTESIAN_POINT('',(-1.375,1.325,0.E+000)); +#1242 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1243 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1244 = ADVANCED_FACE('',(#1245),#1263,.F.); +#1245 = FACE_BOUND('',#1246,.F.); +#1246 = EDGE_LOOP('',(#1247,#1255,#1256,#1257)); +#1247 = ORIENTED_EDGE('',*,*,#1248,.F.); +#1248 = EDGE_CURVE('',#1220,#1249,#1251,.T.); +#1249 = VERTEX_POINT('',#1250); +#1250 = CARTESIAN_POINT('',(-1.125,1.8,0.E+000)); +#1251 = LINE('',#1252,#1253); +#1252 = CARTESIAN_POINT('',(-1.125,1.325,0.E+000)); +#1253 = VECTOR('',#1254,1.); +#1254 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1255 = ORIENTED_EDGE('',*,*,#1234,.T.); +#1256 = ORIENTED_EDGE('',*,*,#217,.F.); +#1257 = ORIENTED_EDGE('',*,*,#1258,.F.); +#1258 = EDGE_CURVE('',#1249,#210,#1259,.T.); +#1259 = LINE('',#1260,#1261); +#1260 = CARTESIAN_POINT('',(-1.125,1.8,0.E+000)); +#1261 = VECTOR('',#1262,1.); +#1262 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1263 = PLANE('',#1264); +#1264 = AXIS2_PLACEMENT_3D('',#1265,#1266,#1267); +#1265 = CARTESIAN_POINT('',(-1.125,1.325,0.E+000)); +#1266 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1267 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1268 = ADVANCED_FACE('',(#1269),#1287,.F.); +#1269 = FACE_BOUND('',#1270,.F.); +#1270 = EDGE_LOOP('',(#1271,#1279,#1285,#1286)); +#1271 = ORIENTED_EDGE('',*,*,#1272,.F.); +#1272 = EDGE_CURVE('',#1273,#1218,#1275,.T.); +#1273 = VERTEX_POINT('',#1274); +#1274 = CARTESIAN_POINT('',(-1.375,1.8,0.E+000)); +#1275 = LINE('',#1276,#1277); +#1276 = CARTESIAN_POINT('',(-1.375,1.8,0.E+000)); +#1277 = VECTOR('',#1278,1.); +#1278 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1279 = ORIENTED_EDGE('',*,*,#1280,.T.); +#1280 = EDGE_CURVE('',#1273,#202,#1281,.T.); +#1281 = LINE('',#1282,#1283); +#1282 = CARTESIAN_POINT('',(-1.375,1.8,0.E+000)); +#1283 = VECTOR('',#1284,1.); +#1284 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1285 = ORIENTED_EDGE('',*,*,#201,.F.); +#1286 = ORIENTED_EDGE('',*,*,#1227,.F.); +#1287 = PLANE('',#1288); +#1288 = AXIS2_PLACEMENT_3D('',#1289,#1290,#1291); +#1289 = CARTESIAN_POINT('',(-1.375,1.8,0.E+000)); +#1290 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1291 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1292 = ADVANCED_FACE('',(#1293),#1304,.F.); +#1293 = FACE_BOUND('',#1294,.F.); +#1294 = EDGE_LOOP('',(#1295,#1301,#1302,#1303)); +#1295 = ORIENTED_EDGE('',*,*,#1296,.F.); +#1296 = EDGE_CURVE('',#1249,#1273,#1297,.T.); +#1297 = LINE('',#1298,#1299); +#1298 = CARTESIAN_POINT('',(-1.125,1.8,0.E+000)); +#1299 = VECTOR('',#1300,1.); +#1300 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1301 = ORIENTED_EDGE('',*,*,#1258,.T.); +#1302 = ORIENTED_EDGE('',*,*,#209,.F.); +#1303 = ORIENTED_EDGE('',*,*,#1280,.F.); +#1304 = PLANE('',#1305); +#1305 = AXIS2_PLACEMENT_3D('',#1306,#1307,#1308); +#1306 = CARTESIAN_POINT('',(-1.125,1.8,0.E+000)); +#1307 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1308 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1309 = ADVANCED_FACE('',(#1310),#1335,.F.); +#1310 = FACE_BOUND('',#1311,.F.); +#1311 = EDGE_LOOP('',(#1312,#1322,#1328,#1329)); +#1312 = ORIENTED_EDGE('',*,*,#1313,.F.); +#1313 = EDGE_CURVE('',#1314,#1316,#1318,.T.); +#1314 = VERTEX_POINT('',#1315); +#1315 = CARTESIAN_POINT('',(-0.875,1.8,0.E+000)); +#1316 = VERTEX_POINT('',#1317); +#1317 = CARTESIAN_POINT('',(-0.875,1.325,0.E+000)); +#1318 = LINE('',#1319,#1320); +#1319 = CARTESIAN_POINT('',(-0.875,1.8,0.E+000)); +#1320 = VECTOR('',#1321,1.); +#1321 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1322 = ORIENTED_EDGE('',*,*,#1323,.T.); +#1323 = EDGE_CURVE('',#1314,#228,#1324,.T.); +#1324 = LINE('',#1325,#1326); +#1325 = CARTESIAN_POINT('',(-0.875,1.8,0.E+000)); +#1326 = VECTOR('',#1327,1.); +#1327 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1328 = ORIENTED_EDGE('',*,*,#225,.F.); +#1329 = ORIENTED_EDGE('',*,*,#1330,.F.); +#1330 = EDGE_CURVE('',#1316,#226,#1331,.T.); +#1331 = LINE('',#1332,#1333); +#1332 = CARTESIAN_POINT('',(-0.875,1.325,0.E+000)); +#1333 = VECTOR('',#1334,1.); +#1334 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1335 = PLANE('',#1336); +#1336 = AXIS2_PLACEMENT_3D('',#1337,#1338,#1339); +#1337 = CARTESIAN_POINT('',(-0.875,1.8,0.E+000)); +#1338 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1339 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1340 = ADVANCED_FACE('',(#1341),#1359,.F.); +#1341 = FACE_BOUND('',#1342,.F.); +#1342 = EDGE_LOOP('',(#1343,#1351,#1352,#1353)); +#1343 = ORIENTED_EDGE('',*,*,#1344,.F.); +#1344 = EDGE_CURVE('',#1316,#1345,#1347,.T.); +#1345 = VERTEX_POINT('',#1346); +#1346 = CARTESIAN_POINT('',(-0.625,1.325,0.E+000)); +#1347 = LINE('',#1348,#1349); +#1348 = CARTESIAN_POINT('',(-0.875,1.325,0.E+000)); +#1349 = VECTOR('',#1350,1.); +#1350 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1351 = ORIENTED_EDGE('',*,*,#1330,.T.); +#1352 = ORIENTED_EDGE('',*,*,#251,.F.); +#1353 = ORIENTED_EDGE('',*,*,#1354,.F.); +#1354 = EDGE_CURVE('',#1345,#244,#1355,.T.); +#1355 = LINE('',#1356,#1357); +#1356 = CARTESIAN_POINT('',(-0.625,1.325,0.E+000)); +#1357 = VECTOR('',#1358,1.); +#1358 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1359 = PLANE('',#1360); +#1360 = AXIS2_PLACEMENT_3D('',#1361,#1362,#1363); +#1361 = CARTESIAN_POINT('',(-0.875,1.325,0.E+000)); +#1362 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1363 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1364 = ADVANCED_FACE('',(#1365),#1383,.F.); +#1365 = FACE_BOUND('',#1366,.F.); +#1366 = EDGE_LOOP('',(#1367,#1375,#1381,#1382)); +#1367 = ORIENTED_EDGE('',*,*,#1368,.F.); +#1368 = EDGE_CURVE('',#1369,#1314,#1371,.T.); +#1369 = VERTEX_POINT('',#1370); +#1370 = CARTESIAN_POINT('',(-0.625,1.8,0.E+000)); +#1371 = LINE('',#1372,#1373); +#1372 = CARTESIAN_POINT('',(-0.625,1.8,0.E+000)); +#1373 = VECTOR('',#1374,1.); +#1374 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1375 = ORIENTED_EDGE('',*,*,#1376,.T.); +#1376 = EDGE_CURVE('',#1369,#236,#1377,.T.); +#1377 = LINE('',#1378,#1379); +#1378 = CARTESIAN_POINT('',(-0.625,1.8,0.E+000)); +#1379 = VECTOR('',#1380,1.); +#1380 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1381 = ORIENTED_EDGE('',*,*,#235,.F.); +#1382 = ORIENTED_EDGE('',*,*,#1323,.F.); +#1383 = PLANE('',#1384); +#1384 = AXIS2_PLACEMENT_3D('',#1385,#1386,#1387); +#1385 = CARTESIAN_POINT('',(-0.625,1.8,0.E+000)); +#1386 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1387 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1388 = ADVANCED_FACE('',(#1389),#1400,.F.); +#1389 = FACE_BOUND('',#1390,.F.); +#1390 = EDGE_LOOP('',(#1391,#1397,#1398,#1399)); +#1391 = ORIENTED_EDGE('',*,*,#1392,.F.); +#1392 = EDGE_CURVE('',#1345,#1369,#1393,.T.); +#1393 = LINE('',#1394,#1395); +#1394 = CARTESIAN_POINT('',(-0.625,1.325,0.E+000)); +#1395 = VECTOR('',#1396,1.); +#1396 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1397 = ORIENTED_EDGE('',*,*,#1354,.T.); +#1398 = ORIENTED_EDGE('',*,*,#243,.F.); +#1399 = ORIENTED_EDGE('',*,*,#1376,.F.); +#1400 = PLANE('',#1401); +#1401 = AXIS2_PLACEMENT_3D('',#1402,#1403,#1404); +#1402 = CARTESIAN_POINT('',(-0.625,1.325,0.E+000)); +#1403 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1404 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1405 = ADVANCED_FACE('',(#1406),#1431,.F.); +#1406 = FACE_BOUND('',#1407,.F.); +#1407 = EDGE_LOOP('',(#1408,#1418,#1424,#1425)); +#1408 = ORIENTED_EDGE('',*,*,#1409,.F.); +#1409 = EDGE_CURVE('',#1410,#1412,#1414,.T.); +#1410 = VERTEX_POINT('',#1411); +#1411 = CARTESIAN_POINT('',(-0.375,1.8,0.E+000)); +#1412 = VERTEX_POINT('',#1413); +#1413 = CARTESIAN_POINT('',(-0.375,1.325,0.E+000)); +#1414 = LINE('',#1415,#1416); +#1415 = CARTESIAN_POINT('',(-0.375,1.8,0.E+000)); +#1416 = VECTOR('',#1417,1.); +#1417 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1418 = ORIENTED_EDGE('',*,*,#1419,.T.); +#1419 = EDGE_CURVE('',#1410,#262,#1420,.T.); +#1420 = LINE('',#1421,#1422); +#1421 = CARTESIAN_POINT('',(-0.375,1.8,0.E+000)); +#1422 = VECTOR('',#1423,1.); +#1423 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1424 = ORIENTED_EDGE('',*,*,#259,.F.); +#1425 = ORIENTED_EDGE('',*,*,#1426,.F.); +#1426 = EDGE_CURVE('',#1412,#260,#1427,.T.); +#1427 = LINE('',#1428,#1429); +#1428 = CARTESIAN_POINT('',(-0.375,1.325,0.E+000)); +#1429 = VECTOR('',#1430,1.); +#1430 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1431 = PLANE('',#1432); +#1432 = AXIS2_PLACEMENT_3D('',#1433,#1434,#1435); +#1433 = CARTESIAN_POINT('',(-0.375,1.8,0.E+000)); +#1434 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1435 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1436 = ADVANCED_FACE('',(#1437),#1455,.F.); +#1437 = FACE_BOUND('',#1438,.F.); +#1438 = EDGE_LOOP('',(#1439,#1447,#1448,#1449)); +#1439 = ORIENTED_EDGE('',*,*,#1440,.F.); +#1440 = EDGE_CURVE('',#1412,#1441,#1443,.T.); +#1441 = VERTEX_POINT('',#1442); +#1442 = CARTESIAN_POINT('',(-0.125,1.325,0.E+000)); +#1443 = LINE('',#1444,#1445); +#1444 = CARTESIAN_POINT('',(-0.375,1.325,0.E+000)); +#1445 = VECTOR('',#1446,1.); +#1446 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1447 = ORIENTED_EDGE('',*,*,#1426,.T.); +#1448 = ORIENTED_EDGE('',*,*,#285,.F.); +#1449 = ORIENTED_EDGE('',*,*,#1450,.F.); +#1450 = EDGE_CURVE('',#1441,#278,#1451,.T.); +#1451 = LINE('',#1452,#1453); +#1452 = CARTESIAN_POINT('',(-0.125,1.325,0.E+000)); +#1453 = VECTOR('',#1454,1.); +#1454 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1455 = PLANE('',#1456); +#1456 = AXIS2_PLACEMENT_3D('',#1457,#1458,#1459); +#1457 = CARTESIAN_POINT('',(-0.375,1.325,0.E+000)); +#1458 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1459 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1460 = ADVANCED_FACE('',(#1461),#1479,.F.); +#1461 = FACE_BOUND('',#1462,.F.); +#1462 = EDGE_LOOP('',(#1463,#1471,#1477,#1478)); +#1463 = ORIENTED_EDGE('',*,*,#1464,.F.); +#1464 = EDGE_CURVE('',#1465,#1410,#1467,.T.); +#1465 = VERTEX_POINT('',#1466); +#1466 = CARTESIAN_POINT('',(-0.125,1.8,0.E+000)); +#1467 = LINE('',#1468,#1469); +#1468 = CARTESIAN_POINT('',(-0.125,1.8,0.E+000)); +#1469 = VECTOR('',#1470,1.); +#1470 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1471 = ORIENTED_EDGE('',*,*,#1472,.T.); +#1472 = EDGE_CURVE('',#1465,#270,#1473,.T.); +#1473 = LINE('',#1474,#1475); +#1474 = CARTESIAN_POINT('',(-0.125,1.8,0.E+000)); +#1475 = VECTOR('',#1476,1.); +#1476 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1477 = ORIENTED_EDGE('',*,*,#269,.F.); +#1478 = ORIENTED_EDGE('',*,*,#1419,.F.); +#1479 = PLANE('',#1480); +#1480 = AXIS2_PLACEMENT_3D('',#1481,#1482,#1483); +#1481 = CARTESIAN_POINT('',(-0.125,1.8,0.E+000)); +#1482 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1483 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1484 = ADVANCED_FACE('',(#1485),#1496,.F.); +#1485 = FACE_BOUND('',#1486,.F.); +#1486 = EDGE_LOOP('',(#1487,#1493,#1494,#1495)); +#1487 = ORIENTED_EDGE('',*,*,#1488,.F.); +#1488 = EDGE_CURVE('',#1441,#1465,#1489,.T.); +#1489 = LINE('',#1490,#1491); +#1490 = CARTESIAN_POINT('',(-0.125,1.325,0.E+000)); +#1491 = VECTOR('',#1492,1.); +#1492 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1493 = ORIENTED_EDGE('',*,*,#1450,.T.); +#1494 = ORIENTED_EDGE('',*,*,#277,.F.); +#1495 = ORIENTED_EDGE('',*,*,#1472,.F.); +#1496 = PLANE('',#1497); +#1497 = AXIS2_PLACEMENT_3D('',#1498,#1499,#1500); +#1498 = CARTESIAN_POINT('',(-0.125,1.325,0.E+000)); +#1499 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1500 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1501 = ADVANCED_FACE('',(#1502),#1527,.F.); +#1502 = FACE_BOUND('',#1503,.F.); +#1503 = EDGE_LOOP('',(#1504,#1514,#1520,#1521)); +#1504 = ORIENTED_EDGE('',*,*,#1505,.F.); +#1505 = EDGE_CURVE('',#1506,#1508,#1510,.T.); +#1506 = VERTEX_POINT('',#1507); +#1507 = CARTESIAN_POINT('',(0.875,1.8,0.E+000)); +#1508 = VERTEX_POINT('',#1509); +#1509 = CARTESIAN_POINT('',(0.625,1.8,0.E+000)); +#1510 = LINE('',#1511,#1512); +#1511 = CARTESIAN_POINT('',(0.875,1.8,0.E+000)); +#1512 = VECTOR('',#1513,1.); +#1513 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1514 = ORIENTED_EDGE('',*,*,#1515,.T.); +#1515 = EDGE_CURVE('',#1506,#296,#1516,.T.); +#1516 = LINE('',#1517,#1518); +#1517 = CARTESIAN_POINT('',(0.875,1.8,0.E+000)); +#1518 = VECTOR('',#1519,1.); +#1519 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1520 = ORIENTED_EDGE('',*,*,#293,.F.); +#1521 = ORIENTED_EDGE('',*,*,#1522,.F.); +#1522 = EDGE_CURVE('',#1508,#294,#1523,.T.); +#1523 = LINE('',#1524,#1525); +#1524 = CARTESIAN_POINT('',(0.625,1.8,0.E+000)); +#1525 = VECTOR('',#1526,1.); +#1526 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1527 = PLANE('',#1528); +#1528 = AXIS2_PLACEMENT_3D('',#1529,#1530,#1531); +#1529 = CARTESIAN_POINT('',(0.875,1.8,0.E+000)); +#1530 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1531 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1532 = ADVANCED_FACE('',(#1533),#1551,.F.); +#1533 = FACE_BOUND('',#1534,.F.); +#1534 = EDGE_LOOP('',(#1535,#1543,#1544,#1545)); +#1535 = ORIENTED_EDGE('',*,*,#1536,.F.); +#1536 = EDGE_CURVE('',#1508,#1537,#1539,.T.); +#1537 = VERTEX_POINT('',#1538); +#1538 = CARTESIAN_POINT('',(0.625,1.325,0.E+000)); +#1539 = LINE('',#1540,#1541); +#1540 = CARTESIAN_POINT('',(0.625,1.8,0.E+000)); +#1541 = VECTOR('',#1542,1.); +#1542 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1543 = ORIENTED_EDGE('',*,*,#1522,.T.); +#1544 = ORIENTED_EDGE('',*,*,#319,.F.); +#1545 = ORIENTED_EDGE('',*,*,#1546,.F.); +#1546 = EDGE_CURVE('',#1537,#312,#1547,.T.); +#1547 = LINE('',#1548,#1549); +#1548 = CARTESIAN_POINT('',(0.625,1.325,0.E+000)); +#1549 = VECTOR('',#1550,1.); +#1550 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1551 = PLANE('',#1552); +#1552 = AXIS2_PLACEMENT_3D('',#1553,#1554,#1555); +#1553 = CARTESIAN_POINT('',(0.625,1.8,0.E+000)); +#1554 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1555 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1556 = ADVANCED_FACE('',(#1557),#1575,.F.); +#1557 = FACE_BOUND('',#1558,.F.); +#1558 = EDGE_LOOP('',(#1559,#1567,#1573,#1574)); +#1559 = ORIENTED_EDGE('',*,*,#1560,.F.); +#1560 = EDGE_CURVE('',#1561,#1506,#1563,.T.); +#1561 = VERTEX_POINT('',#1562); +#1562 = CARTESIAN_POINT('',(0.875,1.325,0.E+000)); +#1563 = LINE('',#1564,#1565); +#1564 = CARTESIAN_POINT('',(0.875,1.325,0.E+000)); +#1565 = VECTOR('',#1566,1.); +#1566 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1567 = ORIENTED_EDGE('',*,*,#1568,.T.); +#1568 = EDGE_CURVE('',#1561,#304,#1569,.T.); +#1569 = LINE('',#1570,#1571); +#1570 = CARTESIAN_POINT('',(0.875,1.325,0.E+000)); +#1571 = VECTOR('',#1572,1.); +#1572 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1573 = ORIENTED_EDGE('',*,*,#303,.F.); +#1574 = ORIENTED_EDGE('',*,*,#1515,.F.); +#1575 = PLANE('',#1576); +#1576 = AXIS2_PLACEMENT_3D('',#1577,#1578,#1579); +#1577 = CARTESIAN_POINT('',(0.875,1.325,0.E+000)); +#1578 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1579 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1580 = ADVANCED_FACE('',(#1581),#1592,.F.); +#1581 = FACE_BOUND('',#1582,.F.); +#1582 = EDGE_LOOP('',(#1583,#1589,#1590,#1591)); +#1583 = ORIENTED_EDGE('',*,*,#1584,.F.); +#1584 = EDGE_CURVE('',#1537,#1561,#1585,.T.); +#1585 = LINE('',#1586,#1587); +#1586 = CARTESIAN_POINT('',(0.625,1.325,0.E+000)); +#1587 = VECTOR('',#1588,1.); +#1588 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1589 = ORIENTED_EDGE('',*,*,#1546,.T.); +#1590 = ORIENTED_EDGE('',*,*,#311,.F.); +#1591 = ORIENTED_EDGE('',*,*,#1568,.F.); +#1592 = PLANE('',#1593); +#1593 = AXIS2_PLACEMENT_3D('',#1594,#1595,#1596); +#1594 = CARTESIAN_POINT('',(0.625,1.325,0.E+000)); +#1595 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1596 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1597 = ADVANCED_FACE('',(#1598),#1623,.F.); +#1598 = FACE_BOUND('',#1599,.F.); +#1599 = EDGE_LOOP('',(#1600,#1610,#1616,#1617)); +#1600 = ORIENTED_EDGE('',*,*,#1601,.F.); +#1601 = EDGE_CURVE('',#1602,#1604,#1606,.T.); +#1602 = VERTEX_POINT('',#1603); +#1603 = CARTESIAN_POINT('',(0.375,1.325,0.E+000)); +#1604 = VERTEX_POINT('',#1605); +#1605 = CARTESIAN_POINT('',(0.375,1.8,0.E+000)); +#1606 = LINE('',#1607,#1608); +#1607 = CARTESIAN_POINT('',(0.375,1.325,0.E+000)); +#1608 = VECTOR('',#1609,1.); +#1609 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1610 = ORIENTED_EDGE('',*,*,#1611,.T.); +#1611 = EDGE_CURVE('',#1602,#330,#1612,.T.); +#1612 = LINE('',#1613,#1614); +#1613 = CARTESIAN_POINT('',(0.375,1.325,0.E+000)); +#1614 = VECTOR('',#1615,1.); +#1615 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1616 = ORIENTED_EDGE('',*,*,#327,.F.); +#1617 = ORIENTED_EDGE('',*,*,#1618,.F.); +#1618 = EDGE_CURVE('',#1604,#328,#1619,.T.); +#1619 = LINE('',#1620,#1621); +#1620 = CARTESIAN_POINT('',(0.375,1.8,0.E+000)); +#1621 = VECTOR('',#1622,1.); +#1622 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1623 = PLANE('',#1624); +#1624 = AXIS2_PLACEMENT_3D('',#1625,#1626,#1627); +#1625 = CARTESIAN_POINT('',(0.375,1.325,0.E+000)); +#1626 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1627 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1628 = ADVANCED_FACE('',(#1629),#1647,.F.); +#1629 = FACE_BOUND('',#1630,.F.); +#1630 = EDGE_LOOP('',(#1631,#1639,#1640,#1641)); +#1631 = ORIENTED_EDGE('',*,*,#1632,.F.); +#1632 = EDGE_CURVE('',#1604,#1633,#1635,.T.); +#1633 = VERTEX_POINT('',#1634); +#1634 = CARTESIAN_POINT('',(0.125,1.8,0.E+000)); +#1635 = LINE('',#1636,#1637); +#1636 = CARTESIAN_POINT('',(0.375,1.8,0.E+000)); +#1637 = VECTOR('',#1638,1.); +#1638 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1639 = ORIENTED_EDGE('',*,*,#1618,.T.); +#1640 = ORIENTED_EDGE('',*,*,#353,.F.); +#1641 = ORIENTED_EDGE('',*,*,#1642,.F.); +#1642 = EDGE_CURVE('',#1633,#346,#1643,.T.); +#1643 = LINE('',#1644,#1645); +#1644 = CARTESIAN_POINT('',(0.125,1.8,0.E+000)); +#1645 = VECTOR('',#1646,1.); +#1646 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1647 = PLANE('',#1648); +#1648 = AXIS2_PLACEMENT_3D('',#1649,#1650,#1651); +#1649 = CARTESIAN_POINT('',(0.375,1.8,0.E+000)); +#1650 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1651 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1652 = ADVANCED_FACE('',(#1653),#1671,.F.); +#1653 = FACE_BOUND('',#1654,.F.); +#1654 = EDGE_LOOP('',(#1655,#1663,#1669,#1670)); +#1655 = ORIENTED_EDGE('',*,*,#1656,.F.); +#1656 = EDGE_CURVE('',#1657,#1602,#1659,.T.); +#1657 = VERTEX_POINT('',#1658); +#1658 = CARTESIAN_POINT('',(0.125,1.325,0.E+000)); +#1659 = LINE('',#1660,#1661); +#1660 = CARTESIAN_POINT('',(0.125,1.325,0.E+000)); +#1661 = VECTOR('',#1662,1.); +#1662 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1663 = ORIENTED_EDGE('',*,*,#1664,.T.); +#1664 = EDGE_CURVE('',#1657,#338,#1665,.T.); +#1665 = LINE('',#1666,#1667); +#1666 = CARTESIAN_POINT('',(0.125,1.325,0.E+000)); +#1667 = VECTOR('',#1668,1.); +#1668 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1669 = ORIENTED_EDGE('',*,*,#337,.F.); +#1670 = ORIENTED_EDGE('',*,*,#1611,.F.); +#1671 = PLANE('',#1672); +#1672 = AXIS2_PLACEMENT_3D('',#1673,#1674,#1675); +#1673 = CARTESIAN_POINT('',(0.125,1.325,0.E+000)); +#1674 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1675 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1676 = ADVANCED_FACE('',(#1677),#1688,.F.); +#1677 = FACE_BOUND('',#1678,.F.); +#1678 = EDGE_LOOP('',(#1679,#1685,#1686,#1687)); +#1679 = ORIENTED_EDGE('',*,*,#1680,.F.); +#1680 = EDGE_CURVE('',#1633,#1657,#1681,.T.); +#1681 = LINE('',#1682,#1683); +#1682 = CARTESIAN_POINT('',(0.125,1.8,0.E+000)); +#1683 = VECTOR('',#1684,1.); +#1684 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1685 = ORIENTED_EDGE('',*,*,#1642,.T.); +#1686 = ORIENTED_EDGE('',*,*,#345,.F.); +#1687 = ORIENTED_EDGE('',*,*,#1664,.F.); +#1688 = PLANE('',#1689); +#1689 = AXIS2_PLACEMENT_3D('',#1690,#1691,#1692); +#1690 = CARTESIAN_POINT('',(0.125,1.8,0.E+000)); +#1691 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1692 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1693 = ADVANCED_FACE('',(#1694),#1719,.F.); +#1694 = FACE_BOUND('',#1695,.F.); +#1695 = EDGE_LOOP('',(#1696,#1706,#1712,#1713)); +#1696 = ORIENTED_EDGE('',*,*,#1697,.F.); +#1697 = EDGE_CURVE('',#1698,#1700,#1702,.T.); +#1698 = VERTEX_POINT('',#1699); +#1699 = CARTESIAN_POINT('',(2.025,0.125,0.E+000)); +#1700 = VERTEX_POINT('',#1701); +#1701 = CARTESIAN_POINT('',(2.5,0.125,0.E+000)); +#1702 = LINE('',#1703,#1704); +#1703 = CARTESIAN_POINT('',(2.025,0.125,0.E+000)); +#1704 = VECTOR('',#1705,1.); +#1705 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1706 = ORIENTED_EDGE('',*,*,#1707,.T.); +#1707 = EDGE_CURVE('',#1698,#364,#1708,.T.); +#1708 = LINE('',#1709,#1710); +#1709 = CARTESIAN_POINT('',(2.025,0.125,0.E+000)); +#1710 = VECTOR('',#1711,1.); +#1711 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1712 = ORIENTED_EDGE('',*,*,#361,.F.); +#1713 = ORIENTED_EDGE('',*,*,#1714,.F.); +#1714 = EDGE_CURVE('',#1700,#362,#1715,.T.); +#1715 = LINE('',#1716,#1717); +#1716 = CARTESIAN_POINT('',(2.5,0.125,0.E+000)); +#1717 = VECTOR('',#1718,1.); +#1718 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1719 = PLANE('',#1720); +#1720 = AXIS2_PLACEMENT_3D('',#1721,#1722,#1723); +#1721 = CARTESIAN_POINT('',(2.025,0.125,0.E+000)); +#1722 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1723 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1724 = ADVANCED_FACE('',(#1725),#1743,.F.); +#1725 = FACE_BOUND('',#1726,.F.); +#1726 = EDGE_LOOP('',(#1727,#1735,#1736,#1737)); +#1727 = ORIENTED_EDGE('',*,*,#1728,.F.); +#1728 = EDGE_CURVE('',#1700,#1729,#1731,.T.); +#1729 = VERTEX_POINT('',#1730); +#1730 = CARTESIAN_POINT('',(2.5,0.375,0.E+000)); +#1731 = LINE('',#1732,#1733); +#1732 = CARTESIAN_POINT('',(2.5,0.125,0.E+000)); +#1733 = VECTOR('',#1734,1.); +#1734 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1735 = ORIENTED_EDGE('',*,*,#1714,.T.); +#1736 = ORIENTED_EDGE('',*,*,#387,.F.); +#1737 = ORIENTED_EDGE('',*,*,#1738,.F.); +#1738 = EDGE_CURVE('',#1729,#380,#1739,.T.); +#1739 = LINE('',#1740,#1741); +#1740 = CARTESIAN_POINT('',(2.5,0.375,0.E+000)); +#1741 = VECTOR('',#1742,1.); +#1742 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1743 = PLANE('',#1744); +#1744 = AXIS2_PLACEMENT_3D('',#1745,#1746,#1747); +#1745 = CARTESIAN_POINT('',(2.5,0.125,0.E+000)); +#1746 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1747 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1748 = ADVANCED_FACE('',(#1749),#1767,.F.); +#1749 = FACE_BOUND('',#1750,.F.); +#1750 = EDGE_LOOP('',(#1751,#1759,#1765,#1766)); +#1751 = ORIENTED_EDGE('',*,*,#1752,.F.); +#1752 = EDGE_CURVE('',#1753,#1698,#1755,.T.); +#1753 = VERTEX_POINT('',#1754); +#1754 = CARTESIAN_POINT('',(2.025,0.375,0.E+000)); +#1755 = LINE('',#1756,#1757); +#1756 = CARTESIAN_POINT('',(2.025,0.375,0.E+000)); +#1757 = VECTOR('',#1758,1.); +#1758 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1759 = ORIENTED_EDGE('',*,*,#1760,.T.); +#1760 = EDGE_CURVE('',#1753,#372,#1761,.T.); +#1761 = LINE('',#1762,#1763); +#1762 = CARTESIAN_POINT('',(2.025,0.375,0.E+000)); +#1763 = VECTOR('',#1764,1.); +#1764 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1765 = ORIENTED_EDGE('',*,*,#371,.F.); +#1766 = ORIENTED_EDGE('',*,*,#1707,.F.); +#1767 = PLANE('',#1768); +#1768 = AXIS2_PLACEMENT_3D('',#1769,#1770,#1771); +#1769 = CARTESIAN_POINT('',(2.025,0.375,0.E+000)); +#1770 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1771 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1772 = ADVANCED_FACE('',(#1773),#1784,.F.); +#1773 = FACE_BOUND('',#1774,.F.); +#1774 = EDGE_LOOP('',(#1775,#1781,#1782,#1783)); +#1775 = ORIENTED_EDGE('',*,*,#1776,.F.); +#1776 = EDGE_CURVE('',#1729,#1753,#1777,.T.); +#1777 = LINE('',#1778,#1779); +#1778 = CARTESIAN_POINT('',(2.5,0.375,0.E+000)); +#1779 = VECTOR('',#1780,1.); +#1780 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1781 = ORIENTED_EDGE('',*,*,#1738,.T.); +#1782 = ORIENTED_EDGE('',*,*,#379,.F.); +#1783 = ORIENTED_EDGE('',*,*,#1760,.F.); +#1784 = PLANE('',#1785); +#1785 = AXIS2_PLACEMENT_3D('',#1786,#1787,#1788); +#1786 = CARTESIAN_POINT('',(2.5,0.375,0.E+000)); +#1787 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1788 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1789 = ADVANCED_FACE('',(#1790),#1815,.F.); +#1790 = FACE_BOUND('',#1791,.F.); +#1791 = EDGE_LOOP('',(#1792,#1802,#1808,#1809)); +#1792 = ORIENTED_EDGE('',*,*,#1793,.F.); +#1793 = EDGE_CURVE('',#1794,#1796,#1798,.T.); +#1794 = VERTEX_POINT('',#1795); +#1795 = CARTESIAN_POINT('',(2.5,0.625,0.E+000)); +#1796 = VERTEX_POINT('',#1797); +#1797 = CARTESIAN_POINT('',(2.5,0.875,0.E+000)); +#1798 = LINE('',#1799,#1800); +#1799 = CARTESIAN_POINT('',(2.5,0.625,0.E+000)); +#1800 = VECTOR('',#1801,1.); +#1801 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1802 = ORIENTED_EDGE('',*,*,#1803,.T.); +#1803 = EDGE_CURVE('',#1794,#398,#1804,.T.); +#1804 = LINE('',#1805,#1806); +#1805 = CARTESIAN_POINT('',(2.5,0.625,0.E+000)); +#1806 = VECTOR('',#1807,1.); +#1807 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1808 = ORIENTED_EDGE('',*,*,#395,.F.); +#1809 = ORIENTED_EDGE('',*,*,#1810,.F.); +#1810 = EDGE_CURVE('',#1796,#396,#1811,.T.); +#1811 = LINE('',#1812,#1813); +#1812 = CARTESIAN_POINT('',(2.5,0.875,0.E+000)); +#1813 = VECTOR('',#1814,1.); +#1814 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1815 = PLANE('',#1816); +#1816 = AXIS2_PLACEMENT_3D('',#1817,#1818,#1819); +#1817 = CARTESIAN_POINT('',(2.5,0.625,0.E+000)); +#1818 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1819 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1820 = ADVANCED_FACE('',(#1821),#1839,.F.); +#1821 = FACE_BOUND('',#1822,.F.); +#1822 = EDGE_LOOP('',(#1823,#1831,#1832,#1833)); +#1823 = ORIENTED_EDGE('',*,*,#1824,.F.); +#1824 = EDGE_CURVE('',#1796,#1825,#1827,.T.); +#1825 = VERTEX_POINT('',#1826); +#1826 = CARTESIAN_POINT('',(2.025,0.875,0.E+000)); +#1827 = LINE('',#1828,#1829); +#1828 = CARTESIAN_POINT('',(2.5,0.875,0.E+000)); +#1829 = VECTOR('',#1830,1.); +#1830 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1831 = ORIENTED_EDGE('',*,*,#1810,.T.); +#1832 = ORIENTED_EDGE('',*,*,#421,.F.); +#1833 = ORIENTED_EDGE('',*,*,#1834,.F.); +#1834 = EDGE_CURVE('',#1825,#414,#1835,.T.); +#1835 = LINE('',#1836,#1837); +#1836 = CARTESIAN_POINT('',(2.025,0.875,0.E+000)); +#1837 = VECTOR('',#1838,1.); +#1838 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1839 = PLANE('',#1840); +#1840 = AXIS2_PLACEMENT_3D('',#1841,#1842,#1843); +#1841 = CARTESIAN_POINT('',(2.5,0.875,0.E+000)); +#1842 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1843 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1844 = ADVANCED_FACE('',(#1845),#1863,.F.); +#1845 = FACE_BOUND('',#1846,.F.); +#1846 = EDGE_LOOP('',(#1847,#1855,#1861,#1862)); +#1847 = ORIENTED_EDGE('',*,*,#1848,.F.); +#1848 = EDGE_CURVE('',#1849,#1794,#1851,.T.); +#1849 = VERTEX_POINT('',#1850); +#1850 = CARTESIAN_POINT('',(2.025,0.625,0.E+000)); +#1851 = LINE('',#1852,#1853); +#1852 = CARTESIAN_POINT('',(2.025,0.625,0.E+000)); +#1853 = VECTOR('',#1854,1.); +#1854 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1855 = ORIENTED_EDGE('',*,*,#1856,.T.); +#1856 = EDGE_CURVE('',#1849,#406,#1857,.T.); +#1857 = LINE('',#1858,#1859); +#1858 = CARTESIAN_POINT('',(2.025,0.625,0.E+000)); +#1859 = VECTOR('',#1860,1.); +#1860 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1861 = ORIENTED_EDGE('',*,*,#405,.F.); +#1862 = ORIENTED_EDGE('',*,*,#1803,.F.); +#1863 = PLANE('',#1864); +#1864 = AXIS2_PLACEMENT_3D('',#1865,#1866,#1867); +#1865 = CARTESIAN_POINT('',(2.025,0.625,0.E+000)); +#1866 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1867 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1868 = ADVANCED_FACE('',(#1869),#1880,.F.); +#1869 = FACE_BOUND('',#1870,.F.); +#1870 = EDGE_LOOP('',(#1871,#1877,#1878,#1879)); +#1871 = ORIENTED_EDGE('',*,*,#1872,.F.); +#1872 = EDGE_CURVE('',#1825,#1849,#1873,.T.); +#1873 = LINE('',#1874,#1875); +#1874 = CARTESIAN_POINT('',(2.025,0.875,0.E+000)); +#1875 = VECTOR('',#1876,1.); +#1876 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1877 = ORIENTED_EDGE('',*,*,#1834,.T.); +#1878 = ORIENTED_EDGE('',*,*,#413,.F.); +#1879 = ORIENTED_EDGE('',*,*,#1856,.F.); +#1880 = PLANE('',#1881); +#1881 = AXIS2_PLACEMENT_3D('',#1882,#1883,#1884); +#1882 = CARTESIAN_POINT('',(2.025,0.875,0.E+000)); +#1883 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1884 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1885 = ADVANCED_FACE('',(#1886),#1911,.F.); +#1886 = FACE_BOUND('',#1887,.F.); +#1887 = EDGE_LOOP('',(#1888,#1898,#1904,#1905)); +#1888 = ORIENTED_EDGE('',*,*,#1889,.F.); +#1889 = EDGE_CURVE('',#1890,#1892,#1894,.T.); +#1890 = VERTEX_POINT('',#1891); +#1891 = CARTESIAN_POINT('',(2.375,1.8,0.E+000)); +#1892 = VERTEX_POINT('',#1893); +#1893 = CARTESIAN_POINT('',(2.125,1.8,0.E+000)); +#1894 = LINE('',#1895,#1896); +#1895 = CARTESIAN_POINT('',(2.375,1.8,0.E+000)); +#1896 = VECTOR('',#1897,1.); +#1897 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1898 = ORIENTED_EDGE('',*,*,#1899,.T.); +#1899 = EDGE_CURVE('',#1890,#432,#1900,.T.); +#1900 = LINE('',#1901,#1902); +#1901 = CARTESIAN_POINT('',(2.375,1.8,0.E+000)); +#1902 = VECTOR('',#1903,1.); +#1903 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1904 = ORIENTED_EDGE('',*,*,#429,.F.); +#1905 = ORIENTED_EDGE('',*,*,#1906,.F.); +#1906 = EDGE_CURVE('',#1892,#430,#1907,.T.); +#1907 = LINE('',#1908,#1909); +#1908 = CARTESIAN_POINT('',(2.125,1.8,0.E+000)); +#1909 = VECTOR('',#1910,1.); +#1910 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1911 = PLANE('',#1912); +#1912 = AXIS2_PLACEMENT_3D('',#1913,#1914,#1915); +#1913 = CARTESIAN_POINT('',(2.375,1.8,0.E+000)); +#1914 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1915 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1916 = ADVANCED_FACE('',(#1917),#1935,.F.); +#1917 = FACE_BOUND('',#1918,.F.); +#1918 = EDGE_LOOP('',(#1919,#1927,#1928,#1929)); +#1919 = ORIENTED_EDGE('',*,*,#1920,.F.); +#1920 = EDGE_CURVE('',#1892,#1921,#1923,.T.); +#1921 = VERTEX_POINT('',#1922); +#1922 = CARTESIAN_POINT('',(2.125,1.325,0.E+000)); +#1923 = LINE('',#1924,#1925); +#1924 = CARTESIAN_POINT('',(2.125,1.8,0.E+000)); +#1925 = VECTOR('',#1926,1.); +#1926 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1927 = ORIENTED_EDGE('',*,*,#1906,.T.); +#1928 = ORIENTED_EDGE('',*,*,#455,.F.); +#1929 = ORIENTED_EDGE('',*,*,#1930,.F.); +#1930 = EDGE_CURVE('',#1921,#448,#1931,.T.); +#1931 = LINE('',#1932,#1933); +#1932 = CARTESIAN_POINT('',(2.125,1.325,0.E+000)); +#1933 = VECTOR('',#1934,1.); +#1934 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1935 = PLANE('',#1936); +#1936 = AXIS2_PLACEMENT_3D('',#1937,#1938,#1939); +#1937 = CARTESIAN_POINT('',(2.125,1.8,0.E+000)); +#1938 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1939 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#1940 = ADVANCED_FACE('',(#1941),#1959,.F.); +#1941 = FACE_BOUND('',#1942,.F.); +#1942 = EDGE_LOOP('',(#1943,#1951,#1957,#1958)); +#1943 = ORIENTED_EDGE('',*,*,#1944,.F.); +#1944 = EDGE_CURVE('',#1945,#1890,#1947,.T.); +#1945 = VERTEX_POINT('',#1946); +#1946 = CARTESIAN_POINT('',(2.375,1.325,0.E+000)); +#1947 = LINE('',#1948,#1949); +#1948 = CARTESIAN_POINT('',(2.375,1.325,0.E+000)); +#1949 = VECTOR('',#1950,1.); +#1950 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1951 = ORIENTED_EDGE('',*,*,#1952,.T.); +#1952 = EDGE_CURVE('',#1945,#440,#1953,.T.); +#1953 = LINE('',#1954,#1955); +#1954 = CARTESIAN_POINT('',(2.375,1.325,0.E+000)); +#1955 = VECTOR('',#1956,1.); +#1956 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1957 = ORIENTED_EDGE('',*,*,#439,.F.); +#1958 = ORIENTED_EDGE('',*,*,#1899,.F.); +#1959 = PLANE('',#1960); +#1960 = AXIS2_PLACEMENT_3D('',#1961,#1962,#1963); +#1961 = CARTESIAN_POINT('',(2.375,1.325,0.E+000)); +#1962 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#1963 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1964 = ADVANCED_FACE('',(#1965),#1976,.F.); +#1965 = FACE_BOUND('',#1966,.F.); +#1966 = EDGE_LOOP('',(#1967,#1973,#1974,#1975)); +#1967 = ORIENTED_EDGE('',*,*,#1968,.F.); +#1968 = EDGE_CURVE('',#1921,#1945,#1969,.T.); +#1969 = LINE('',#1970,#1971); +#1970 = CARTESIAN_POINT('',(2.125,1.325,0.E+000)); +#1971 = VECTOR('',#1972,1.); +#1972 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1973 = ORIENTED_EDGE('',*,*,#1930,.T.); +#1974 = ORIENTED_EDGE('',*,*,#447,.F.); +#1975 = ORIENTED_EDGE('',*,*,#1952,.F.); +#1976 = PLANE('',#1977); +#1977 = AXIS2_PLACEMENT_3D('',#1978,#1979,#1980); +#1978 = CARTESIAN_POINT('',(2.125,1.325,0.E+000)); +#1979 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#1980 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1981 = ADVANCED_FACE('',(#1982),#2007,.F.); +#1982 = FACE_BOUND('',#1983,.F.); +#1983 = EDGE_LOOP('',(#1984,#1994,#2000,#2001)); +#1984 = ORIENTED_EDGE('',*,*,#1985,.F.); +#1985 = EDGE_CURVE('',#1986,#1988,#1990,.T.); +#1986 = VERTEX_POINT('',#1987); +#1987 = CARTESIAN_POINT('',(1.625,1.325,0.E+000)); +#1988 = VERTEX_POINT('',#1989); +#1989 = CARTESIAN_POINT('',(1.875,1.325,0.E+000)); +#1990 = LINE('',#1991,#1992); +#1991 = CARTESIAN_POINT('',(1.625,1.325,0.E+000)); +#1992 = VECTOR('',#1993,1.); +#1993 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#1994 = ORIENTED_EDGE('',*,*,#1995,.T.); +#1995 = EDGE_CURVE('',#1986,#466,#1996,.T.); +#1996 = LINE('',#1997,#1998); +#1997 = CARTESIAN_POINT('',(1.625,1.325,0.E+000)); +#1998 = VECTOR('',#1999,1.); +#1999 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2000 = ORIENTED_EDGE('',*,*,#463,.F.); +#2001 = ORIENTED_EDGE('',*,*,#2002,.F.); +#2002 = EDGE_CURVE('',#1988,#464,#2003,.T.); +#2003 = LINE('',#2004,#2005); +#2004 = CARTESIAN_POINT('',(1.875,1.325,0.E+000)); +#2005 = VECTOR('',#2006,1.); +#2006 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2007 = PLANE('',#2008); +#2008 = AXIS2_PLACEMENT_3D('',#2009,#2010,#2011); +#2009 = CARTESIAN_POINT('',(1.625,1.325,0.E+000)); +#2010 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#2011 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#2012 = ADVANCED_FACE('',(#2013),#2031,.F.); +#2013 = FACE_BOUND('',#2014,.F.); +#2014 = EDGE_LOOP('',(#2015,#2023,#2024,#2025)); +#2015 = ORIENTED_EDGE('',*,*,#2016,.F.); +#2016 = EDGE_CURVE('',#1988,#2017,#2019,.T.); +#2017 = VERTEX_POINT('',#2018); +#2018 = CARTESIAN_POINT('',(1.875,1.8,0.E+000)); +#2019 = LINE('',#2020,#2021); +#2020 = CARTESIAN_POINT('',(1.875,1.325,0.E+000)); +#2021 = VECTOR('',#2022,1.); +#2022 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#2023 = ORIENTED_EDGE('',*,*,#2002,.T.); +#2024 = ORIENTED_EDGE('',*,*,#489,.F.); +#2025 = ORIENTED_EDGE('',*,*,#2026,.F.); +#2026 = EDGE_CURVE('',#2017,#482,#2027,.T.); +#2027 = LINE('',#2028,#2029); +#2028 = CARTESIAN_POINT('',(1.875,1.8,0.E+000)); +#2029 = VECTOR('',#2030,1.); +#2030 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2031 = PLANE('',#2032); +#2032 = AXIS2_PLACEMENT_3D('',#2033,#2034,#2035); +#2033 = CARTESIAN_POINT('',(1.875,1.325,0.E+000)); +#2034 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#2035 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#2036 = ADVANCED_FACE('',(#2037),#2055,.F.); +#2037 = FACE_BOUND('',#2038,.F.); +#2038 = EDGE_LOOP('',(#2039,#2047,#2053,#2054)); +#2039 = ORIENTED_EDGE('',*,*,#2040,.F.); +#2040 = EDGE_CURVE('',#2041,#1986,#2043,.T.); +#2041 = VERTEX_POINT('',#2042); +#2042 = CARTESIAN_POINT('',(1.625,1.8,0.E+000)); +#2043 = LINE('',#2044,#2045); +#2044 = CARTESIAN_POINT('',(1.625,1.8,0.E+000)); +#2045 = VECTOR('',#2046,1.); +#2046 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#2047 = ORIENTED_EDGE('',*,*,#2048,.T.); +#2048 = EDGE_CURVE('',#2041,#474,#2049,.T.); +#2049 = LINE('',#2050,#2051); +#2050 = CARTESIAN_POINT('',(1.625,1.8,0.E+000)); +#2051 = VECTOR('',#2052,1.); +#2052 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2053 = ORIENTED_EDGE('',*,*,#473,.F.); +#2054 = ORIENTED_EDGE('',*,*,#1995,.F.); +#2055 = PLANE('',#2056); +#2056 = AXIS2_PLACEMENT_3D('',#2057,#2058,#2059); +#2057 = CARTESIAN_POINT('',(1.625,1.8,0.E+000)); +#2058 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#2059 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#2060 = ADVANCED_FACE('',(#2061),#2072,.F.); +#2061 = FACE_BOUND('',#2062,.F.); +#2062 = EDGE_LOOP('',(#2063,#2069,#2070,#2071)); +#2063 = ORIENTED_EDGE('',*,*,#2064,.F.); +#2064 = EDGE_CURVE('',#2017,#2041,#2065,.T.); +#2065 = LINE('',#2066,#2067); +#2066 = CARTESIAN_POINT('',(1.875,1.8,0.E+000)); +#2067 = VECTOR('',#2068,1.); +#2068 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#2069 = ORIENTED_EDGE('',*,*,#2026,.T.); +#2070 = ORIENTED_EDGE('',*,*,#481,.F.); +#2071 = ORIENTED_EDGE('',*,*,#2048,.F.); +#2072 = PLANE('',#2073); +#2073 = AXIS2_PLACEMENT_3D('',#2074,#2075,#2076); +#2074 = CARTESIAN_POINT('',(1.875,1.8,0.E+000)); +#2075 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#2076 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#2077 = ADVANCED_FACE('',(#2078),#2103,.F.); +#2078 = FACE_BOUND('',#2079,.F.); +#2079 = EDGE_LOOP('',(#2080,#2090,#2096,#2097)); +#2080 = ORIENTED_EDGE('',*,*,#2081,.F.); +#2081 = EDGE_CURVE('',#2082,#2084,#2086,.T.); +#2082 = VERTEX_POINT('',#2083); +#2083 = CARTESIAN_POINT('',(1.375,1.8,0.E+000)); +#2084 = VERTEX_POINT('',#2085); +#2085 = CARTESIAN_POINT('',(1.125,1.8,0.E+000)); +#2086 = LINE('',#2087,#2088); +#2087 = CARTESIAN_POINT('',(1.375,1.8,0.E+000)); +#2088 = VECTOR('',#2089,1.); +#2089 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#2090 = ORIENTED_EDGE('',*,*,#2091,.T.); +#2091 = EDGE_CURVE('',#2082,#500,#2092,.T.); +#2092 = LINE('',#2093,#2094); +#2093 = CARTESIAN_POINT('',(1.375,1.8,0.E+000)); +#2094 = VECTOR('',#2095,1.); +#2095 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2096 = ORIENTED_EDGE('',*,*,#497,.F.); +#2097 = ORIENTED_EDGE('',*,*,#2098,.F.); +#2098 = EDGE_CURVE('',#2084,#498,#2099,.T.); +#2099 = LINE('',#2100,#2101); +#2100 = CARTESIAN_POINT('',(1.125,1.8,0.E+000)); +#2101 = VECTOR('',#2102,1.); +#2102 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2103 = PLANE('',#2104); +#2104 = AXIS2_PLACEMENT_3D('',#2105,#2106,#2107); +#2105 = CARTESIAN_POINT('',(1.375,1.8,0.E+000)); +#2106 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#2107 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#2108 = ADVANCED_FACE('',(#2109),#2127,.F.); +#2109 = FACE_BOUND('',#2110,.F.); +#2110 = EDGE_LOOP('',(#2111,#2119,#2120,#2121)); +#2111 = ORIENTED_EDGE('',*,*,#2112,.F.); +#2112 = EDGE_CURVE('',#2084,#2113,#2115,.T.); +#2113 = VERTEX_POINT('',#2114); +#2114 = CARTESIAN_POINT('',(1.125,1.325,0.E+000)); +#2115 = LINE('',#2116,#2117); +#2116 = CARTESIAN_POINT('',(1.125,1.8,0.E+000)); +#2117 = VECTOR('',#2118,1.); +#2118 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#2119 = ORIENTED_EDGE('',*,*,#2098,.T.); +#2120 = ORIENTED_EDGE('',*,*,#523,.F.); +#2121 = ORIENTED_EDGE('',*,*,#2122,.F.); +#2122 = EDGE_CURVE('',#2113,#516,#2123,.T.); +#2123 = LINE('',#2124,#2125); +#2124 = CARTESIAN_POINT('',(1.125,1.325,0.E+000)); +#2125 = VECTOR('',#2126,1.); +#2126 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2127 = PLANE('',#2128); +#2128 = AXIS2_PLACEMENT_3D('',#2129,#2130,#2131); +#2129 = CARTESIAN_POINT('',(1.125,1.8,0.E+000)); +#2130 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#2131 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#2132 = ADVANCED_FACE('',(#2133),#2151,.F.); +#2133 = FACE_BOUND('',#2134,.F.); +#2134 = EDGE_LOOP('',(#2135,#2143,#2149,#2150)); +#2135 = ORIENTED_EDGE('',*,*,#2136,.F.); +#2136 = EDGE_CURVE('',#2137,#2082,#2139,.T.); +#2137 = VERTEX_POINT('',#2138); +#2138 = CARTESIAN_POINT('',(1.375,1.325,0.E+000)); +#2139 = LINE('',#2140,#2141); +#2140 = CARTESIAN_POINT('',(1.375,1.325,0.E+000)); +#2141 = VECTOR('',#2142,1.); +#2142 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#2143 = ORIENTED_EDGE('',*,*,#2144,.T.); +#2144 = EDGE_CURVE('',#2137,#508,#2145,.T.); +#2145 = LINE('',#2146,#2147); +#2146 = CARTESIAN_POINT('',(1.375,1.325,0.E+000)); +#2147 = VECTOR('',#2148,1.); +#2148 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2149 = ORIENTED_EDGE('',*,*,#507,.F.); +#2150 = ORIENTED_EDGE('',*,*,#2091,.F.); +#2151 = PLANE('',#2152); +#2152 = AXIS2_PLACEMENT_3D('',#2153,#2154,#2155); +#2153 = CARTESIAN_POINT('',(1.375,1.325,0.E+000)); +#2154 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#2155 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#2156 = ADVANCED_FACE('',(#2157),#2168,.F.); +#2157 = FACE_BOUND('',#2158,.F.); +#2158 = EDGE_LOOP('',(#2159,#2165,#2166,#2167)); +#2159 = ORIENTED_EDGE('',*,*,#2160,.F.); +#2160 = EDGE_CURVE('',#2113,#2137,#2161,.T.); +#2161 = LINE('',#2162,#2163); +#2162 = CARTESIAN_POINT('',(1.125,1.325,0.E+000)); +#2163 = VECTOR('',#2164,1.); +#2164 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#2165 = ORIENTED_EDGE('',*,*,#2122,.T.); +#2166 = ORIENTED_EDGE('',*,*,#515,.F.); +#2167 = ORIENTED_EDGE('',*,*,#2144,.F.); +#2168 = PLANE('',#2169); +#2169 = AXIS2_PLACEMENT_3D('',#2170,#2171,#2172); +#2170 = CARTESIAN_POINT('',(1.125,1.325,0.E+000)); +#2171 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#2172 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#2173 = ADVANCED_FACE('',(#2174),#2199,.F.); +#2174 = FACE_BOUND('',#2175,.F.); +#2175 = EDGE_LOOP('',(#2176,#2186,#2192,#2193)); +#2176 = ORIENTED_EDGE('',*,*,#2177,.F.); +#2177 = EDGE_CURVE('',#2178,#2180,#2182,.T.); +#2178 = VERTEX_POINT('',#2179); +#2179 = CARTESIAN_POINT('',(2.5,-0.125,0.E+000)); +#2180 = VERTEX_POINT('',#2181); +#2181 = CARTESIAN_POINT('',(2.025,-0.125,0.E+000)); +#2182 = LINE('',#2183,#2184); +#2183 = CARTESIAN_POINT('',(2.5,-0.125,0.E+000)); +#2184 = VECTOR('',#2185,1.); +#2185 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2186 = ORIENTED_EDGE('',*,*,#2187,.T.); +#2187 = EDGE_CURVE('',#2178,#534,#2188,.T.); +#2188 = LINE('',#2189,#2190); +#2189 = CARTESIAN_POINT('',(2.5,-0.125,0.E+000)); +#2190 = VECTOR('',#2191,1.); +#2191 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2192 = ORIENTED_EDGE('',*,*,#531,.F.); +#2193 = ORIENTED_EDGE('',*,*,#2194,.F.); +#2194 = EDGE_CURVE('',#2180,#532,#2195,.T.); +#2195 = LINE('',#2196,#2197); +#2196 = CARTESIAN_POINT('',(2.025,-0.125,0.E+000)); +#2197 = VECTOR('',#2198,1.); +#2198 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2199 = PLANE('',#2200); +#2200 = AXIS2_PLACEMENT_3D('',#2201,#2202,#2203); +#2201 = CARTESIAN_POINT('',(2.5,-0.125,0.E+000)); +#2202 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2203 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2204 = ADVANCED_FACE('',(#2205),#2223,.F.); +#2205 = FACE_BOUND('',#2206,.F.); +#2206 = EDGE_LOOP('',(#2207,#2215,#2216,#2217)); +#2207 = ORIENTED_EDGE('',*,*,#2208,.F.); +#2208 = EDGE_CURVE('',#2180,#2209,#2211,.T.); +#2209 = VERTEX_POINT('',#2210); +#2210 = CARTESIAN_POINT('',(2.025,-0.375,0.E+000)); +#2211 = LINE('',#2212,#2213); +#2212 = CARTESIAN_POINT('',(2.025,-0.125,0.E+000)); +#2213 = VECTOR('',#2214,1.); +#2214 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2215 = ORIENTED_EDGE('',*,*,#2194,.T.); +#2216 = ORIENTED_EDGE('',*,*,#557,.F.); +#2217 = ORIENTED_EDGE('',*,*,#2218,.F.); +#2218 = EDGE_CURVE('',#2209,#550,#2219,.T.); +#2219 = LINE('',#2220,#2221); +#2220 = CARTESIAN_POINT('',(2.025,-0.375,0.E+000)); +#2221 = VECTOR('',#2222,1.); +#2222 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2223 = PLANE('',#2224); +#2224 = AXIS2_PLACEMENT_3D('',#2225,#2226,#2227); +#2225 = CARTESIAN_POINT('',(2.025,-0.125,0.E+000)); +#2226 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2227 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2228 = ADVANCED_FACE('',(#2229),#2247,.F.); +#2229 = FACE_BOUND('',#2230,.F.); +#2230 = EDGE_LOOP('',(#2231,#2239,#2245,#2246)); +#2231 = ORIENTED_EDGE('',*,*,#2232,.F.); +#2232 = EDGE_CURVE('',#2233,#2178,#2235,.T.); +#2233 = VERTEX_POINT('',#2234); +#2234 = CARTESIAN_POINT('',(2.5,-0.375,0.E+000)); +#2235 = LINE('',#2236,#2237); +#2236 = CARTESIAN_POINT('',(2.5,-0.375,0.E+000)); +#2237 = VECTOR('',#2238,1.); +#2238 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2239 = ORIENTED_EDGE('',*,*,#2240,.T.); +#2240 = EDGE_CURVE('',#2233,#542,#2241,.T.); +#2241 = LINE('',#2242,#2243); +#2242 = CARTESIAN_POINT('',(2.5,-0.375,0.E+000)); +#2243 = VECTOR('',#2244,1.); +#2244 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2245 = ORIENTED_EDGE('',*,*,#541,.F.); +#2246 = ORIENTED_EDGE('',*,*,#2187,.F.); +#2247 = PLANE('',#2248); +#2248 = AXIS2_PLACEMENT_3D('',#2249,#2250,#2251); +#2249 = CARTESIAN_POINT('',(2.5,-0.375,0.E+000)); +#2250 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2251 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2252 = ADVANCED_FACE('',(#2253),#2264,.F.); +#2253 = FACE_BOUND('',#2254,.F.); +#2254 = EDGE_LOOP('',(#2255,#2261,#2262,#2263)); +#2255 = ORIENTED_EDGE('',*,*,#2256,.F.); +#2256 = EDGE_CURVE('',#2209,#2233,#2257,.T.); +#2257 = LINE('',#2258,#2259); +#2258 = CARTESIAN_POINT('',(2.025,-0.375,0.E+000)); +#2259 = VECTOR('',#2260,1.); +#2260 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2261 = ORIENTED_EDGE('',*,*,#2218,.T.); +#2262 = ORIENTED_EDGE('',*,*,#549,.F.); +#2263 = ORIENTED_EDGE('',*,*,#2240,.F.); +#2264 = PLANE('',#2265); +#2265 = AXIS2_PLACEMENT_3D('',#2266,#2267,#2268); +#2266 = CARTESIAN_POINT('',(2.025,-0.375,0.E+000)); +#2267 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2268 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2269 = ADVANCED_FACE('',(#2270),#2295,.F.); +#2270 = FACE_BOUND('',#2271,.F.); +#2271 = EDGE_LOOP('',(#2272,#2282,#2288,#2289)); +#2272 = ORIENTED_EDGE('',*,*,#2273,.F.); +#2273 = EDGE_CURVE('',#2274,#2276,#2278,.T.); +#2274 = VERTEX_POINT('',#2275); +#2275 = CARTESIAN_POINT('',(2.5,-0.875,0.E+000)); +#2276 = VERTEX_POINT('',#2277); +#2277 = CARTESIAN_POINT('',(2.5,-0.625,0.E+000)); +#2278 = LINE('',#2279,#2280); +#2279 = CARTESIAN_POINT('',(2.5,-0.875,0.E+000)); +#2280 = VECTOR('',#2281,1.); +#2281 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2282 = ORIENTED_EDGE('',*,*,#2283,.T.); +#2283 = EDGE_CURVE('',#2274,#568,#2284,.T.); +#2284 = LINE('',#2285,#2286); +#2285 = CARTESIAN_POINT('',(2.5,-0.875,0.E+000)); +#2286 = VECTOR('',#2287,1.); +#2287 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2288 = ORIENTED_EDGE('',*,*,#565,.F.); +#2289 = ORIENTED_EDGE('',*,*,#2290,.F.); +#2290 = EDGE_CURVE('',#2276,#566,#2291,.T.); +#2291 = LINE('',#2292,#2293); +#2292 = CARTESIAN_POINT('',(2.5,-0.625,0.E+000)); +#2293 = VECTOR('',#2294,1.); +#2294 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2295 = PLANE('',#2296); +#2296 = AXIS2_PLACEMENT_3D('',#2297,#2298,#2299); +#2297 = CARTESIAN_POINT('',(2.5,-0.875,0.E+000)); +#2298 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2299 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2300 = ADVANCED_FACE('',(#2301),#2319,.F.); +#2301 = FACE_BOUND('',#2302,.F.); +#2302 = EDGE_LOOP('',(#2303,#2311,#2312,#2313)); +#2303 = ORIENTED_EDGE('',*,*,#2304,.F.); +#2304 = EDGE_CURVE('',#2276,#2305,#2307,.T.); +#2305 = VERTEX_POINT('',#2306); +#2306 = CARTESIAN_POINT('',(2.025,-0.625,0.E+000)); +#2307 = LINE('',#2308,#2309); +#2308 = CARTESIAN_POINT('',(2.5,-0.625,0.E+000)); +#2309 = VECTOR('',#2310,1.); +#2310 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2311 = ORIENTED_EDGE('',*,*,#2290,.T.); +#2312 = ORIENTED_EDGE('',*,*,#591,.F.); +#2313 = ORIENTED_EDGE('',*,*,#2314,.F.); +#2314 = EDGE_CURVE('',#2305,#584,#2315,.T.); +#2315 = LINE('',#2316,#2317); +#2316 = CARTESIAN_POINT('',(2.025,-0.625,0.E+000)); +#2317 = VECTOR('',#2318,1.); +#2318 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2319 = PLANE('',#2320); +#2320 = AXIS2_PLACEMENT_3D('',#2321,#2322,#2323); +#2321 = CARTESIAN_POINT('',(2.5,-0.625,0.E+000)); +#2322 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2323 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2324 = ADVANCED_FACE('',(#2325),#2343,.F.); +#2325 = FACE_BOUND('',#2326,.F.); +#2326 = EDGE_LOOP('',(#2327,#2335,#2341,#2342)); +#2327 = ORIENTED_EDGE('',*,*,#2328,.F.); +#2328 = EDGE_CURVE('',#2329,#2274,#2331,.T.); +#2329 = VERTEX_POINT('',#2330); +#2330 = CARTESIAN_POINT('',(2.025,-0.875,0.E+000)); +#2331 = LINE('',#2332,#2333); +#2332 = CARTESIAN_POINT('',(2.025,-0.875,0.E+000)); +#2333 = VECTOR('',#2334,1.); +#2334 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2335 = ORIENTED_EDGE('',*,*,#2336,.T.); +#2336 = EDGE_CURVE('',#2329,#576,#2337,.T.); +#2337 = LINE('',#2338,#2339); +#2338 = CARTESIAN_POINT('',(2.025,-0.875,0.E+000)); +#2339 = VECTOR('',#2340,1.); +#2340 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2341 = ORIENTED_EDGE('',*,*,#575,.F.); +#2342 = ORIENTED_EDGE('',*,*,#2283,.F.); +#2343 = PLANE('',#2344); +#2344 = AXIS2_PLACEMENT_3D('',#2345,#2346,#2347); +#2345 = CARTESIAN_POINT('',(2.025,-0.875,0.E+000)); +#2346 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2347 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2348 = ADVANCED_FACE('',(#2349),#2360,.F.); +#2349 = FACE_BOUND('',#2350,.F.); +#2350 = EDGE_LOOP('',(#2351,#2357,#2358,#2359)); +#2351 = ORIENTED_EDGE('',*,*,#2352,.F.); +#2352 = EDGE_CURVE('',#2305,#2329,#2353,.T.); +#2353 = LINE('',#2354,#2355); +#2354 = CARTESIAN_POINT('',(2.025,-0.625,0.E+000)); +#2355 = VECTOR('',#2356,1.); +#2356 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2357 = ORIENTED_EDGE('',*,*,#2314,.T.); +#2358 = ORIENTED_EDGE('',*,*,#583,.F.); +#2359 = ORIENTED_EDGE('',*,*,#2336,.F.); +#2360 = PLANE('',#2361); +#2361 = AXIS2_PLACEMENT_3D('',#2362,#2363,#2364); +#2362 = CARTESIAN_POINT('',(2.025,-0.625,0.E+000)); +#2363 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2364 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2365 = ADVANCED_FACE('',(#2366),#2391,.F.); +#2366 = FACE_BOUND('',#2367,.F.); +#2367 = EDGE_LOOP('',(#2368,#2378,#2384,#2385)); +#2368 = ORIENTED_EDGE('',*,*,#2369,.F.); +#2369 = EDGE_CURVE('',#2370,#2372,#2374,.T.); +#2370 = VERTEX_POINT('',#2371); +#2371 = CARTESIAN_POINT('',(-2.5,-0.625,0.E+000)); +#2372 = VERTEX_POINT('',#2373); +#2373 = CARTESIAN_POINT('',(-2.5,-0.875,0.E+000)); +#2374 = LINE('',#2375,#2376); +#2375 = CARTESIAN_POINT('',(-2.5,-0.625,0.E+000)); +#2376 = VECTOR('',#2377,1.); +#2377 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2378 = ORIENTED_EDGE('',*,*,#2379,.T.); +#2379 = EDGE_CURVE('',#2370,#602,#2380,.T.); +#2380 = LINE('',#2381,#2382); +#2381 = CARTESIAN_POINT('',(-2.5,-0.625,0.E+000)); +#2382 = VECTOR('',#2383,1.); +#2383 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2384 = ORIENTED_EDGE('',*,*,#599,.F.); +#2385 = ORIENTED_EDGE('',*,*,#2386,.F.); +#2386 = EDGE_CURVE('',#2372,#600,#2387,.T.); +#2387 = LINE('',#2388,#2389); +#2388 = CARTESIAN_POINT('',(-2.5,-0.875,0.E+000)); +#2389 = VECTOR('',#2390,1.); +#2390 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2391 = PLANE('',#2392); +#2392 = AXIS2_PLACEMENT_3D('',#2393,#2394,#2395); +#2393 = CARTESIAN_POINT('',(-2.5,-0.625,0.E+000)); +#2394 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2395 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2396 = ADVANCED_FACE('',(#2397),#2415,.F.); +#2397 = FACE_BOUND('',#2398,.F.); +#2398 = EDGE_LOOP('',(#2399,#2407,#2408,#2409)); +#2399 = ORIENTED_EDGE('',*,*,#2400,.F.); +#2400 = EDGE_CURVE('',#2372,#2401,#2403,.T.); +#2401 = VERTEX_POINT('',#2402); +#2402 = CARTESIAN_POINT('',(-2.025,-0.875,0.E+000)); +#2403 = LINE('',#2404,#2405); +#2404 = CARTESIAN_POINT('',(-2.5,-0.875,0.E+000)); +#2405 = VECTOR('',#2406,1.); +#2406 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2407 = ORIENTED_EDGE('',*,*,#2386,.T.); +#2408 = ORIENTED_EDGE('',*,*,#625,.F.); +#2409 = ORIENTED_EDGE('',*,*,#2410,.F.); +#2410 = EDGE_CURVE('',#2401,#618,#2411,.T.); +#2411 = LINE('',#2412,#2413); +#2412 = CARTESIAN_POINT('',(-2.025,-0.875,0.E+000)); +#2413 = VECTOR('',#2414,1.); +#2414 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2415 = PLANE('',#2416); +#2416 = AXIS2_PLACEMENT_3D('',#2417,#2418,#2419); +#2417 = CARTESIAN_POINT('',(-2.5,-0.875,0.E+000)); +#2418 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2419 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2420 = ADVANCED_FACE('',(#2421),#2439,.F.); +#2421 = FACE_BOUND('',#2422,.F.); +#2422 = EDGE_LOOP('',(#2423,#2431,#2437,#2438)); +#2423 = ORIENTED_EDGE('',*,*,#2424,.F.); +#2424 = EDGE_CURVE('',#2425,#2370,#2427,.T.); +#2425 = VERTEX_POINT('',#2426); +#2426 = CARTESIAN_POINT('',(-2.025,-0.625,0.E+000)); +#2427 = LINE('',#2428,#2429); +#2428 = CARTESIAN_POINT('',(-2.025,-0.625,0.E+000)); +#2429 = VECTOR('',#2430,1.); +#2430 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2431 = ORIENTED_EDGE('',*,*,#2432,.T.); +#2432 = EDGE_CURVE('',#2425,#610,#2433,.T.); +#2433 = LINE('',#2434,#2435); +#2434 = CARTESIAN_POINT('',(-2.025,-0.625,0.E+000)); +#2435 = VECTOR('',#2436,1.); +#2436 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2437 = ORIENTED_EDGE('',*,*,#609,.F.); +#2438 = ORIENTED_EDGE('',*,*,#2379,.F.); +#2439 = PLANE('',#2440); +#2440 = AXIS2_PLACEMENT_3D('',#2441,#2442,#2443); +#2441 = CARTESIAN_POINT('',(-2.025,-0.625,0.E+000)); +#2442 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2443 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2444 = ADVANCED_FACE('',(#2445),#2456,.F.); +#2445 = FACE_BOUND('',#2446,.F.); +#2446 = EDGE_LOOP('',(#2447,#2453,#2454,#2455)); +#2447 = ORIENTED_EDGE('',*,*,#2448,.F.); +#2448 = EDGE_CURVE('',#2401,#2425,#2449,.T.); +#2449 = LINE('',#2450,#2451); +#2450 = CARTESIAN_POINT('',(-2.025,-0.875,0.E+000)); +#2451 = VECTOR('',#2452,1.); +#2452 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2453 = ORIENTED_EDGE('',*,*,#2410,.T.); +#2454 = ORIENTED_EDGE('',*,*,#617,.F.); +#2455 = ORIENTED_EDGE('',*,*,#2432,.F.); +#2456 = PLANE('',#2457); +#2457 = AXIS2_PLACEMENT_3D('',#2458,#2459,#2460); +#2458 = CARTESIAN_POINT('',(-2.025,-0.875,0.E+000)); +#2459 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2460 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2461 = ADVANCED_FACE('',(#2462),#2487,.F.); +#2462 = FACE_BOUND('',#2463,.F.); +#2463 = EDGE_LOOP('',(#2464,#2474,#2480,#2481)); +#2464 = ORIENTED_EDGE('',*,*,#2465,.F.); +#2465 = EDGE_CURVE('',#2466,#2468,#2470,.T.); +#2466 = VERTEX_POINT('',#2467); +#2467 = CARTESIAN_POINT('',(-2.025,0.375,0.E+000)); +#2468 = VERTEX_POINT('',#2469); +#2469 = CARTESIAN_POINT('',(-2.5,0.375,0.E+000)); +#2470 = LINE('',#2471,#2472); +#2471 = CARTESIAN_POINT('',(-2.025,0.375,0.E+000)); +#2472 = VECTOR('',#2473,1.); +#2473 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2474 = ORIENTED_EDGE('',*,*,#2475,.T.); +#2475 = EDGE_CURVE('',#2466,#636,#2476,.T.); +#2476 = LINE('',#2477,#2478); +#2477 = CARTESIAN_POINT('',(-2.025,0.375,0.E+000)); +#2478 = VECTOR('',#2479,1.); +#2479 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2480 = ORIENTED_EDGE('',*,*,#633,.F.); +#2481 = ORIENTED_EDGE('',*,*,#2482,.F.); +#2482 = EDGE_CURVE('',#2468,#634,#2483,.T.); +#2483 = LINE('',#2484,#2485); +#2484 = CARTESIAN_POINT('',(-2.5,0.375,0.E+000)); +#2485 = VECTOR('',#2486,1.); +#2486 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2487 = PLANE('',#2488); +#2488 = AXIS2_PLACEMENT_3D('',#2489,#2490,#2491); +#2489 = CARTESIAN_POINT('',(-2.025,0.375,0.E+000)); +#2490 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2491 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2492 = ADVANCED_FACE('',(#2493),#2511,.F.); +#2493 = FACE_BOUND('',#2494,.F.); +#2494 = EDGE_LOOP('',(#2495,#2503,#2504,#2505)); +#2495 = ORIENTED_EDGE('',*,*,#2496,.F.); +#2496 = EDGE_CURVE('',#2468,#2497,#2499,.T.); +#2497 = VERTEX_POINT('',#2498); +#2498 = CARTESIAN_POINT('',(-2.5,0.125,0.E+000)); +#2499 = LINE('',#2500,#2501); +#2500 = CARTESIAN_POINT('',(-2.5,0.375,0.E+000)); +#2501 = VECTOR('',#2502,1.); +#2502 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2503 = ORIENTED_EDGE('',*,*,#2482,.T.); +#2504 = ORIENTED_EDGE('',*,*,#659,.F.); +#2505 = ORIENTED_EDGE('',*,*,#2506,.F.); +#2506 = EDGE_CURVE('',#2497,#652,#2507,.T.); +#2507 = LINE('',#2508,#2509); +#2508 = CARTESIAN_POINT('',(-2.5,0.125,0.E+000)); +#2509 = VECTOR('',#2510,1.); +#2510 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2511 = PLANE('',#2512); +#2512 = AXIS2_PLACEMENT_3D('',#2513,#2514,#2515); +#2513 = CARTESIAN_POINT('',(-2.5,0.375,0.E+000)); +#2514 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2515 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2516 = ADVANCED_FACE('',(#2517),#2535,.F.); +#2517 = FACE_BOUND('',#2518,.F.); +#2518 = EDGE_LOOP('',(#2519,#2527,#2533,#2534)); +#2519 = ORIENTED_EDGE('',*,*,#2520,.F.); +#2520 = EDGE_CURVE('',#2521,#2466,#2523,.T.); +#2521 = VERTEX_POINT('',#2522); +#2522 = CARTESIAN_POINT('',(-2.025,0.125,0.E+000)); +#2523 = LINE('',#2524,#2525); +#2524 = CARTESIAN_POINT('',(-2.025,0.125,0.E+000)); +#2525 = VECTOR('',#2526,1.); +#2526 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2527 = ORIENTED_EDGE('',*,*,#2528,.T.); +#2528 = EDGE_CURVE('',#2521,#644,#2529,.T.); +#2529 = LINE('',#2530,#2531); +#2530 = CARTESIAN_POINT('',(-2.025,0.125,0.E+000)); +#2531 = VECTOR('',#2532,1.); +#2532 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2533 = ORIENTED_EDGE('',*,*,#643,.F.); +#2534 = ORIENTED_EDGE('',*,*,#2475,.F.); +#2535 = PLANE('',#2536); +#2536 = AXIS2_PLACEMENT_3D('',#2537,#2538,#2539); +#2537 = CARTESIAN_POINT('',(-2.025,0.125,0.E+000)); +#2538 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2539 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2540 = ADVANCED_FACE('',(#2541),#2552,.F.); +#2541 = FACE_BOUND('',#2542,.F.); +#2542 = EDGE_LOOP('',(#2543,#2549,#2550,#2551)); +#2543 = ORIENTED_EDGE('',*,*,#2544,.F.); +#2544 = EDGE_CURVE('',#2497,#2521,#2545,.T.); +#2545 = LINE('',#2546,#2547); +#2546 = CARTESIAN_POINT('',(-2.5,0.125,0.E+000)); +#2547 = VECTOR('',#2548,1.); +#2548 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2549 = ORIENTED_EDGE('',*,*,#2506,.T.); +#2550 = ORIENTED_EDGE('',*,*,#651,.F.); +#2551 = ORIENTED_EDGE('',*,*,#2528,.F.); +#2552 = PLANE('',#2553); +#2553 = AXIS2_PLACEMENT_3D('',#2554,#2555,#2556); +#2554 = CARTESIAN_POINT('',(-2.5,0.125,0.E+000)); +#2555 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2556 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2557 = ADVANCED_FACE('',(#2558),#2583,.F.); +#2558 = FACE_BOUND('',#2559,.F.); +#2559 = EDGE_LOOP('',(#2560,#2570,#2576,#2577)); +#2560 = ORIENTED_EDGE('',*,*,#2561,.F.); +#2561 = EDGE_CURVE('',#2562,#2564,#2566,.T.); +#2562 = VERTEX_POINT('',#2563); +#2563 = CARTESIAN_POINT('',(-2.025,-0.375,0.E+000)); +#2564 = VERTEX_POINT('',#2565); +#2565 = CARTESIAN_POINT('',(-2.025,-0.125,0.E+000)); +#2566 = LINE('',#2567,#2568); +#2567 = CARTESIAN_POINT('',(-2.025,-0.375,0.E+000)); +#2568 = VECTOR('',#2569,1.); +#2569 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2570 = ORIENTED_EDGE('',*,*,#2571,.T.); +#2571 = EDGE_CURVE('',#2562,#670,#2572,.T.); +#2572 = LINE('',#2573,#2574); +#2573 = CARTESIAN_POINT('',(-2.025,-0.375,0.E+000)); +#2574 = VECTOR('',#2575,1.); +#2575 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2576 = ORIENTED_EDGE('',*,*,#667,.F.); +#2577 = ORIENTED_EDGE('',*,*,#2578,.F.); +#2578 = EDGE_CURVE('',#2564,#668,#2579,.T.); +#2579 = LINE('',#2580,#2581); +#2580 = CARTESIAN_POINT('',(-2.025,-0.125,0.E+000)); +#2581 = VECTOR('',#2582,1.); +#2582 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2583 = PLANE('',#2584); +#2584 = AXIS2_PLACEMENT_3D('',#2585,#2586,#2587); +#2585 = CARTESIAN_POINT('',(-2.025,-0.375,0.E+000)); +#2586 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2587 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2588 = ADVANCED_FACE('',(#2589),#2607,.F.); +#2589 = FACE_BOUND('',#2590,.F.); +#2590 = EDGE_LOOP('',(#2591,#2599,#2600,#2601)); +#2591 = ORIENTED_EDGE('',*,*,#2592,.F.); +#2592 = EDGE_CURVE('',#2564,#2593,#2595,.T.); +#2593 = VERTEX_POINT('',#2594); +#2594 = CARTESIAN_POINT('',(-2.5,-0.125,0.E+000)); +#2595 = LINE('',#2596,#2597); +#2596 = CARTESIAN_POINT('',(-2.025,-0.125,0.E+000)); +#2597 = VECTOR('',#2598,1.); +#2598 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2599 = ORIENTED_EDGE('',*,*,#2578,.T.); +#2600 = ORIENTED_EDGE('',*,*,#693,.F.); +#2601 = ORIENTED_EDGE('',*,*,#2602,.F.); +#2602 = EDGE_CURVE('',#2593,#686,#2603,.T.); +#2603 = LINE('',#2604,#2605); +#2604 = CARTESIAN_POINT('',(-2.5,-0.125,0.E+000)); +#2605 = VECTOR('',#2606,1.); +#2606 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2607 = PLANE('',#2608); +#2608 = AXIS2_PLACEMENT_3D('',#2609,#2610,#2611); +#2609 = CARTESIAN_POINT('',(-2.025,-0.125,0.E+000)); +#2610 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2611 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2612 = ADVANCED_FACE('',(#2613),#2631,.F.); +#2613 = FACE_BOUND('',#2614,.F.); +#2614 = EDGE_LOOP('',(#2615,#2623,#2629,#2630)); +#2615 = ORIENTED_EDGE('',*,*,#2616,.F.); +#2616 = EDGE_CURVE('',#2617,#2562,#2619,.T.); +#2617 = VERTEX_POINT('',#2618); +#2618 = CARTESIAN_POINT('',(-2.5,-0.375,0.E+000)); +#2619 = LINE('',#2620,#2621); +#2620 = CARTESIAN_POINT('',(-2.5,-0.375,0.E+000)); +#2621 = VECTOR('',#2622,1.); +#2622 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2623 = ORIENTED_EDGE('',*,*,#2624,.T.); +#2624 = EDGE_CURVE('',#2617,#678,#2625,.T.); +#2625 = LINE('',#2626,#2627); +#2626 = CARTESIAN_POINT('',(-2.5,-0.375,0.E+000)); +#2627 = VECTOR('',#2628,1.); +#2628 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2629 = ORIENTED_EDGE('',*,*,#677,.F.); +#2630 = ORIENTED_EDGE('',*,*,#2571,.F.); +#2631 = PLANE('',#2632); +#2632 = AXIS2_PLACEMENT_3D('',#2633,#2634,#2635); +#2633 = CARTESIAN_POINT('',(-2.5,-0.375,0.E+000)); +#2634 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2635 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2636 = ADVANCED_FACE('',(#2637),#2648,.F.); +#2637 = FACE_BOUND('',#2638,.F.); +#2638 = EDGE_LOOP('',(#2639,#2645,#2646,#2647)); +#2639 = ORIENTED_EDGE('',*,*,#2640,.F.); +#2640 = EDGE_CURVE('',#2593,#2617,#2641,.T.); +#2641 = LINE('',#2642,#2643); +#2642 = CARTESIAN_POINT('',(-2.5,-0.125,0.E+000)); +#2643 = VECTOR('',#2644,1.); +#2644 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2645 = ORIENTED_EDGE('',*,*,#2602,.T.); +#2646 = ORIENTED_EDGE('',*,*,#685,.F.); +#2647 = ORIENTED_EDGE('',*,*,#2624,.F.); +#2648 = PLANE('',#2649); +#2649 = AXIS2_PLACEMENT_3D('',#2650,#2651,#2652); +#2650 = CARTESIAN_POINT('',(-2.5,-0.125,0.E+000)); +#2651 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2652 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2653 = ADVANCED_FACE('',(#2654),#2679,.F.); +#2654 = FACE_BOUND('',#2655,.F.); +#2655 = EDGE_LOOP('',(#2656,#2666,#2672,#2673)); +#2656 = ORIENTED_EDGE('',*,*,#2657,.F.); +#2657 = EDGE_CURVE('',#2658,#2660,#2662,.T.); +#2658 = VERTEX_POINT('',#2659); +#2659 = CARTESIAN_POINT('',(-2.025,0.875,0.E+000)); +#2660 = VERTEX_POINT('',#2661); +#2661 = CARTESIAN_POINT('',(-2.5,0.875,0.E+000)); +#2662 = LINE('',#2663,#2664); +#2663 = CARTESIAN_POINT('',(-2.025,0.875,0.E+000)); +#2664 = VECTOR('',#2665,1.); +#2665 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2666 = ORIENTED_EDGE('',*,*,#2667,.T.); +#2667 = EDGE_CURVE('',#2658,#710,#2668,.T.); +#2668 = LINE('',#2669,#2670); +#2669 = CARTESIAN_POINT('',(-2.025,0.875,0.E+000)); +#2670 = VECTOR('',#2671,1.); +#2671 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2672 = ORIENTED_EDGE('',*,*,#707,.F.); +#2673 = ORIENTED_EDGE('',*,*,#2674,.F.); +#2674 = EDGE_CURVE('',#2660,#708,#2675,.T.); +#2675 = LINE('',#2676,#2677); +#2676 = CARTESIAN_POINT('',(-2.5,0.875,0.E+000)); +#2677 = VECTOR('',#2678,1.); +#2678 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2679 = PLANE('',#2680); +#2680 = AXIS2_PLACEMENT_3D('',#2681,#2682,#2683); +#2681 = CARTESIAN_POINT('',(-2.025,0.875,0.E+000)); +#2682 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2683 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2684 = ADVANCED_FACE('',(#2685),#2703,.F.); +#2685 = FACE_BOUND('',#2686,.F.); +#2686 = EDGE_LOOP('',(#2687,#2695,#2696,#2697)); +#2687 = ORIENTED_EDGE('',*,*,#2688,.F.); +#2688 = EDGE_CURVE('',#2660,#2689,#2691,.T.); +#2689 = VERTEX_POINT('',#2690); +#2690 = CARTESIAN_POINT('',(-2.5,0.625,0.E+000)); +#2691 = LINE('',#2692,#2693); +#2692 = CARTESIAN_POINT('',(-2.5,0.875,0.E+000)); +#2693 = VECTOR('',#2694,1.); +#2694 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2695 = ORIENTED_EDGE('',*,*,#2674,.T.); +#2696 = ORIENTED_EDGE('',*,*,#733,.F.); +#2697 = ORIENTED_EDGE('',*,*,#2698,.F.); +#2698 = EDGE_CURVE('',#2689,#726,#2699,.T.); +#2699 = LINE('',#2700,#2701); +#2700 = CARTESIAN_POINT('',(-2.5,0.625,0.E+000)); +#2701 = VECTOR('',#2702,1.); +#2702 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2703 = PLANE('',#2704); +#2704 = AXIS2_PLACEMENT_3D('',#2705,#2706,#2707); +#2705 = CARTESIAN_POINT('',(-2.5,0.875,0.E+000)); +#2706 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2707 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2708 = ADVANCED_FACE('',(#2709),#2727,.F.); +#2709 = FACE_BOUND('',#2710,.F.); +#2710 = EDGE_LOOP('',(#2711,#2719,#2725,#2726)); +#2711 = ORIENTED_EDGE('',*,*,#2712,.F.); +#2712 = EDGE_CURVE('',#2713,#2658,#2715,.T.); +#2713 = VERTEX_POINT('',#2714); +#2714 = CARTESIAN_POINT('',(-2.025,0.625,0.E+000)); +#2715 = LINE('',#2716,#2717); +#2716 = CARTESIAN_POINT('',(-2.025,0.625,0.E+000)); +#2717 = VECTOR('',#2718,1.); +#2718 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2719 = ORIENTED_EDGE('',*,*,#2720,.T.); +#2720 = EDGE_CURVE('',#2713,#718,#2721,.T.); +#2721 = LINE('',#2722,#2723); +#2722 = CARTESIAN_POINT('',(-2.025,0.625,0.E+000)); +#2723 = VECTOR('',#2724,1.); +#2724 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2725 = ORIENTED_EDGE('',*,*,#717,.F.); +#2726 = ORIENTED_EDGE('',*,*,#2667,.F.); +#2727 = PLANE('',#2728); +#2728 = AXIS2_PLACEMENT_3D('',#2729,#2730,#2731); +#2729 = CARTESIAN_POINT('',(-2.025,0.625,0.E+000)); +#2730 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2731 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2732 = ADVANCED_FACE('',(#2733),#2744,.F.); +#2733 = FACE_BOUND('',#2734,.F.); +#2734 = EDGE_LOOP('',(#2735,#2741,#2742,#2743)); +#2735 = ORIENTED_EDGE('',*,*,#2736,.F.); +#2736 = EDGE_CURVE('',#2689,#2713,#2737,.T.); +#2737 = LINE('',#2738,#2739); +#2738 = CARTESIAN_POINT('',(-2.5,0.625,0.E+000)); +#2739 = VECTOR('',#2740,1.); +#2740 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2741 = ORIENTED_EDGE('',*,*,#2698,.T.); +#2742 = ORIENTED_EDGE('',*,*,#725,.F.); +#2743 = ORIENTED_EDGE('',*,*,#2720,.F.); +#2744 = PLANE('',#2745); +#2745 = AXIS2_PLACEMENT_3D('',#2746,#2747,#2748); +#2746 = CARTESIAN_POINT('',(-2.5,0.625,0.E+000)); +#2747 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2748 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2749 = ADVANCED_FACE('',(#2750),#2775,.F.); +#2750 = FACE_BOUND('',#2751,.F.); +#2751 = EDGE_LOOP('',(#2752,#2762,#2768,#2769)); +#2752 = ORIENTED_EDGE('',*,*,#2753,.F.); +#2753 = EDGE_CURVE('',#2754,#2756,#2758,.T.); +#2754 = VERTEX_POINT('',#2755); +#2755 = CARTESIAN_POINT('',(-1.625,1.8,0.E+000)); +#2756 = VERTEX_POINT('',#2757); +#2757 = CARTESIAN_POINT('',(-1.875,1.8,0.E+000)); +#2758 = LINE('',#2759,#2760); +#2759 = CARTESIAN_POINT('',(-1.625,1.8,0.E+000)); +#2760 = VECTOR('',#2761,1.); +#2761 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#2762 = ORIENTED_EDGE('',*,*,#2763,.T.); +#2763 = EDGE_CURVE('',#2754,#744,#2764,.T.); +#2764 = LINE('',#2765,#2766); +#2765 = CARTESIAN_POINT('',(-1.625,1.8,0.E+000)); +#2766 = VECTOR('',#2767,1.); +#2767 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2768 = ORIENTED_EDGE('',*,*,#741,.F.); +#2769 = ORIENTED_EDGE('',*,*,#2770,.F.); +#2770 = EDGE_CURVE('',#2756,#742,#2771,.T.); +#2771 = LINE('',#2772,#2773); +#2772 = CARTESIAN_POINT('',(-1.875,1.8,0.E+000)); +#2773 = VECTOR('',#2774,1.); +#2774 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2775 = PLANE('',#2776); +#2776 = AXIS2_PLACEMENT_3D('',#2777,#2778,#2779); +#2777 = CARTESIAN_POINT('',(-1.625,1.8,0.E+000)); +#2778 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#2779 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#2780 = ADVANCED_FACE('',(#2781),#2799,.F.); +#2781 = FACE_BOUND('',#2782,.F.); +#2782 = EDGE_LOOP('',(#2783,#2791,#2792,#2793)); +#2783 = ORIENTED_EDGE('',*,*,#2784,.F.); +#2784 = EDGE_CURVE('',#2756,#2785,#2787,.T.); +#2785 = VERTEX_POINT('',#2786); +#2786 = CARTESIAN_POINT('',(-1.875,1.325,0.E+000)); +#2787 = LINE('',#2788,#2789); +#2788 = CARTESIAN_POINT('',(-1.875,1.8,0.E+000)); +#2789 = VECTOR('',#2790,1.); +#2790 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#2791 = ORIENTED_EDGE('',*,*,#2770,.T.); +#2792 = ORIENTED_EDGE('',*,*,#767,.F.); +#2793 = ORIENTED_EDGE('',*,*,#2794,.F.); +#2794 = EDGE_CURVE('',#2785,#760,#2795,.T.); +#2795 = LINE('',#2796,#2797); +#2796 = CARTESIAN_POINT('',(-1.875,1.325,0.E+000)); +#2797 = VECTOR('',#2798,1.); +#2798 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2799 = PLANE('',#2800); +#2800 = AXIS2_PLACEMENT_3D('',#2801,#2802,#2803); +#2801 = CARTESIAN_POINT('',(-1.875,1.8,0.E+000)); +#2802 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#2803 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000)); +#2804 = ADVANCED_FACE('',(#2805),#2823,.F.); +#2805 = FACE_BOUND('',#2806,.F.); +#2806 = EDGE_LOOP('',(#2807,#2815,#2821,#2822)); +#2807 = ORIENTED_EDGE('',*,*,#2808,.F.); +#2808 = EDGE_CURVE('',#2809,#2754,#2811,.T.); +#2809 = VERTEX_POINT('',#2810); +#2810 = CARTESIAN_POINT('',(-1.625,1.325,0.E+000)); +#2811 = LINE('',#2812,#2813); +#2812 = CARTESIAN_POINT('',(-1.625,1.325,0.E+000)); +#2813 = VECTOR('',#2814,1.); +#2814 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#2815 = ORIENTED_EDGE('',*,*,#2816,.T.); +#2816 = EDGE_CURVE('',#2809,#752,#2817,.T.); +#2817 = LINE('',#2818,#2819); +#2818 = CARTESIAN_POINT('',(-1.625,1.325,0.E+000)); +#2819 = VECTOR('',#2820,1.); +#2820 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2821 = ORIENTED_EDGE('',*,*,#751,.F.); +#2822 = ORIENTED_EDGE('',*,*,#2763,.F.); +#2823 = PLANE('',#2824); +#2824 = AXIS2_PLACEMENT_3D('',#2825,#2826,#2827); +#2825 = CARTESIAN_POINT('',(-1.625,1.325,0.E+000)); +#2826 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#2827 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#2828 = ADVANCED_FACE('',(#2829),#2840,.F.); +#2829 = FACE_BOUND('',#2830,.F.); +#2830 = EDGE_LOOP('',(#2831,#2837,#2838,#2839)); +#2831 = ORIENTED_EDGE('',*,*,#2832,.F.); +#2832 = EDGE_CURVE('',#2785,#2809,#2833,.T.); +#2833 = LINE('',#2834,#2835); +#2834 = CARTESIAN_POINT('',(-1.875,1.325,0.E+000)); +#2835 = VECTOR('',#2836,1.); +#2836 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#2837 = ORIENTED_EDGE('',*,*,#2794,.T.); +#2838 = ORIENTED_EDGE('',*,*,#759,.F.); +#2839 = ORIENTED_EDGE('',*,*,#2816,.F.); +#2840 = PLANE('',#2841); +#2841 = AXIS2_PLACEMENT_3D('',#2842,#2843,#2844); +#2842 = CARTESIAN_POINT('',(-1.875,1.325,0.E+000)); +#2843 = DIRECTION('',(4.555315873023E-016,1.,0.E+000)); +#2844 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000)); +#2845 = ADVANCED_FACE('',(#2846),#2871,.F.); +#2846 = FACE_BOUND('',#2847,.F.); +#2847 = EDGE_LOOP('',(#2848,#2858,#2864,#2865)); +#2848 = ORIENTED_EDGE('',*,*,#2849,.F.); +#2849 = EDGE_CURVE('',#2850,#2852,#2854,.T.); +#2850 = VERTEX_POINT('',#2851); +#2851 = CARTESIAN_POINT('',(-1.875,-1.8,0.E+000)); +#2852 = VERTEX_POINT('',#2853); +#2853 = CARTESIAN_POINT('',(-1.625,-1.8,0.E+000)); +#2854 = LINE('',#2855,#2856); +#2855 = CARTESIAN_POINT('',(-1.875,-1.8,0.E+000)); +#2856 = VECTOR('',#2857,1.); +#2857 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#2858 = ORIENTED_EDGE('',*,*,#2859,.T.); +#2859 = EDGE_CURVE('',#2850,#778,#2860,.T.); +#2860 = LINE('',#2861,#2862); +#2861 = CARTESIAN_POINT('',(-1.875,-1.8,0.E+000)); +#2862 = VECTOR('',#2863,1.); +#2863 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2864 = ORIENTED_EDGE('',*,*,#775,.F.); +#2865 = ORIENTED_EDGE('',*,*,#2866,.F.); +#2866 = EDGE_CURVE('',#2852,#776,#2867,.T.); +#2867 = LINE('',#2868,#2869); +#2868 = CARTESIAN_POINT('',(-1.625,-1.8,0.E+000)); +#2869 = VECTOR('',#2870,1.); +#2870 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2871 = PLANE('',#2872); +#2872 = AXIS2_PLACEMENT_3D('',#2873,#2874,#2875); +#2873 = CARTESIAN_POINT('',(-1.875,-1.8,0.E+000)); +#2874 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#2875 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#2876 = ADVANCED_FACE('',(#2877),#2895,.F.); +#2877 = FACE_BOUND('',#2878,.F.); +#2878 = EDGE_LOOP('',(#2879,#2887,#2888,#2889)); +#2879 = ORIENTED_EDGE('',*,*,#2880,.F.); +#2880 = EDGE_CURVE('',#2852,#2881,#2883,.T.); +#2881 = VERTEX_POINT('',#2882); +#2882 = CARTESIAN_POINT('',(-1.625,-1.325,0.E+000)); +#2883 = LINE('',#2884,#2885); +#2884 = CARTESIAN_POINT('',(-1.625,-1.8,0.E+000)); +#2885 = VECTOR('',#2886,1.); +#2886 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#2887 = ORIENTED_EDGE('',*,*,#2866,.T.); +#2888 = ORIENTED_EDGE('',*,*,#801,.F.); +#2889 = ORIENTED_EDGE('',*,*,#2890,.F.); +#2890 = EDGE_CURVE('',#2881,#794,#2891,.T.); +#2891 = LINE('',#2892,#2893); +#2892 = CARTESIAN_POINT('',(-1.625,-1.325,0.E+000)); +#2893 = VECTOR('',#2894,1.); +#2894 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2895 = PLANE('',#2896); +#2896 = AXIS2_PLACEMENT_3D('',#2897,#2898,#2899); +#2897 = CARTESIAN_POINT('',(-1.625,-1.8,0.E+000)); +#2898 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#2899 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#2900 = ADVANCED_FACE('',(#2901),#2919,.F.); +#2901 = FACE_BOUND('',#2902,.F.); +#2902 = EDGE_LOOP('',(#2903,#2911,#2917,#2918)); +#2903 = ORIENTED_EDGE('',*,*,#2904,.F.); +#2904 = EDGE_CURVE('',#2905,#2850,#2907,.T.); +#2905 = VERTEX_POINT('',#2906); +#2906 = CARTESIAN_POINT('',(-1.875,-1.325,0.E+000)); +#2907 = LINE('',#2908,#2909); +#2908 = CARTESIAN_POINT('',(-1.875,-1.325,0.E+000)); +#2909 = VECTOR('',#2910,1.); +#2910 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#2911 = ORIENTED_EDGE('',*,*,#2912,.T.); +#2912 = EDGE_CURVE('',#2905,#786,#2913,.T.); +#2913 = LINE('',#2914,#2915); +#2914 = CARTESIAN_POINT('',(-1.875,-1.325,0.E+000)); +#2915 = VECTOR('',#2916,1.); +#2916 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2917 = ORIENTED_EDGE('',*,*,#785,.F.); +#2918 = ORIENTED_EDGE('',*,*,#2859,.F.); +#2919 = PLANE('',#2920); +#2920 = AXIS2_PLACEMENT_3D('',#2921,#2922,#2923); +#2921 = CARTESIAN_POINT('',(-1.875,-1.325,0.E+000)); +#2922 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#2923 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#2924 = ADVANCED_FACE('',(#2925),#2936,.F.); +#2925 = FACE_BOUND('',#2926,.F.); +#2926 = EDGE_LOOP('',(#2927,#2933,#2934,#2935)); +#2927 = ORIENTED_EDGE('',*,*,#2928,.F.); +#2928 = EDGE_CURVE('',#2881,#2905,#2929,.T.); +#2929 = LINE('',#2930,#2931); +#2930 = CARTESIAN_POINT('',(-1.625,-1.325,0.E+000)); +#2931 = VECTOR('',#2932,1.); +#2932 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#2933 = ORIENTED_EDGE('',*,*,#2890,.T.); +#2934 = ORIENTED_EDGE('',*,*,#793,.F.); +#2935 = ORIENTED_EDGE('',*,*,#2912,.F.); +#2936 = PLANE('',#2937); +#2937 = AXIS2_PLACEMENT_3D('',#2938,#2939,#2940); +#2938 = CARTESIAN_POINT('',(-1.625,-1.325,0.E+000)); +#2939 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#2940 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#2941 = ADVANCED_FACE('',(#2942),#2967,.F.); +#2942 = FACE_BOUND('',#2943,.F.); +#2943 = EDGE_LOOP('',(#2944,#2954,#2960,#2961)); +#2944 = ORIENTED_EDGE('',*,*,#2945,.F.); +#2945 = EDGE_CURVE('',#2946,#2948,#2950,.T.); +#2946 = VERTEX_POINT('',#2947); +#2947 = CARTESIAN_POINT('',(-1.125,-1.8,0.E+000)); +#2948 = VERTEX_POINT('',#2949); +#2949 = CARTESIAN_POINT('',(-1.125,-1.325,0.E+000)); +#2950 = LINE('',#2951,#2952); +#2951 = CARTESIAN_POINT('',(-1.125,-1.8,0.E+000)); +#2952 = VECTOR('',#2953,1.); +#2953 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#2954 = ORIENTED_EDGE('',*,*,#2955,.T.); +#2955 = EDGE_CURVE('',#2946,#812,#2956,.T.); +#2956 = LINE('',#2957,#2958); +#2957 = CARTESIAN_POINT('',(-1.125,-1.8,0.E+000)); +#2958 = VECTOR('',#2959,1.); +#2959 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2960 = ORIENTED_EDGE('',*,*,#809,.F.); +#2961 = ORIENTED_EDGE('',*,*,#2962,.F.); +#2962 = EDGE_CURVE('',#2948,#810,#2963,.T.); +#2963 = LINE('',#2964,#2965); +#2964 = CARTESIAN_POINT('',(-1.125,-1.325,0.E+000)); +#2965 = VECTOR('',#2966,1.); +#2966 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2967 = PLANE('',#2968); +#2968 = AXIS2_PLACEMENT_3D('',#2969,#2970,#2971); +#2969 = CARTESIAN_POINT('',(-1.125,-1.8,0.E+000)); +#2970 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#2971 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#2972 = ADVANCED_FACE('',(#2973),#2991,.F.); +#2973 = FACE_BOUND('',#2974,.F.); +#2974 = EDGE_LOOP('',(#2975,#2983,#2984,#2985)); +#2975 = ORIENTED_EDGE('',*,*,#2976,.F.); +#2976 = EDGE_CURVE('',#2948,#2977,#2979,.T.); +#2977 = VERTEX_POINT('',#2978); +#2978 = CARTESIAN_POINT('',(-1.375,-1.325,0.E+000)); +#2979 = LINE('',#2980,#2981); +#2980 = CARTESIAN_POINT('',(-1.125,-1.325,0.E+000)); +#2981 = VECTOR('',#2982,1.); +#2982 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#2983 = ORIENTED_EDGE('',*,*,#2962,.T.); +#2984 = ORIENTED_EDGE('',*,*,#835,.F.); +#2985 = ORIENTED_EDGE('',*,*,#2986,.F.); +#2986 = EDGE_CURVE('',#2977,#828,#2987,.T.); +#2987 = LINE('',#2988,#2989); +#2988 = CARTESIAN_POINT('',(-1.375,-1.325,0.E+000)); +#2989 = VECTOR('',#2990,1.); +#2990 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2991 = PLANE('',#2992); +#2992 = AXIS2_PLACEMENT_3D('',#2993,#2994,#2995); +#2993 = CARTESIAN_POINT('',(-1.125,-1.325,0.E+000)); +#2994 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#2995 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#2996 = ADVANCED_FACE('',(#2997),#3015,.F.); +#2997 = FACE_BOUND('',#2998,.F.); +#2998 = EDGE_LOOP('',(#2999,#3007,#3013,#3014)); +#2999 = ORIENTED_EDGE('',*,*,#3000,.F.); +#3000 = EDGE_CURVE('',#3001,#2946,#3003,.T.); +#3001 = VERTEX_POINT('',#3002); +#3002 = CARTESIAN_POINT('',(-1.375,-1.8,0.E+000)); +#3003 = LINE('',#3004,#3005); +#3004 = CARTESIAN_POINT('',(-1.375,-1.8,0.E+000)); +#3005 = VECTOR('',#3006,1.); +#3006 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3007 = ORIENTED_EDGE('',*,*,#3008,.T.); +#3008 = EDGE_CURVE('',#3001,#820,#3009,.T.); +#3009 = LINE('',#3010,#3011); +#3010 = CARTESIAN_POINT('',(-1.375,-1.8,0.E+000)); +#3011 = VECTOR('',#3012,1.); +#3012 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3013 = ORIENTED_EDGE('',*,*,#819,.F.); +#3014 = ORIENTED_EDGE('',*,*,#2955,.F.); +#3015 = PLANE('',#3016); +#3016 = AXIS2_PLACEMENT_3D('',#3017,#3018,#3019); +#3017 = CARTESIAN_POINT('',(-1.375,-1.8,0.E+000)); +#3018 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3019 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3020 = ADVANCED_FACE('',(#3021),#3032,.F.); +#3021 = FACE_BOUND('',#3022,.F.); +#3022 = EDGE_LOOP('',(#3023,#3029,#3030,#3031)); +#3023 = ORIENTED_EDGE('',*,*,#3024,.F.); +#3024 = EDGE_CURVE('',#2977,#3001,#3025,.T.); +#3025 = LINE('',#3026,#3027); +#3026 = CARTESIAN_POINT('',(-1.375,-1.325,0.E+000)); +#3027 = VECTOR('',#3028,1.); +#3028 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3029 = ORIENTED_EDGE('',*,*,#2986,.T.); +#3030 = ORIENTED_EDGE('',*,*,#827,.F.); +#3031 = ORIENTED_EDGE('',*,*,#3008,.F.); +#3032 = PLANE('',#3033); +#3033 = AXIS2_PLACEMENT_3D('',#3034,#3035,#3036); +#3034 = CARTESIAN_POINT('',(-1.375,-1.325,0.E+000)); +#3035 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3036 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3037 = ADVANCED_FACE('',(#3038),#3063,.F.); +#3038 = FACE_BOUND('',#3039,.F.); +#3039 = EDGE_LOOP('',(#3040,#3050,#3056,#3057)); +#3040 = ORIENTED_EDGE('',*,*,#3041,.F.); +#3041 = EDGE_CURVE('',#3042,#3044,#3046,.T.); +#3042 = VERTEX_POINT('',#3043); +#3043 = CARTESIAN_POINT('',(-0.625,-1.8,0.E+000)); +#3044 = VERTEX_POINT('',#3045); +#3045 = CARTESIAN_POINT('',(-0.625,-1.325,0.E+000)); +#3046 = LINE('',#3047,#3048); +#3047 = CARTESIAN_POINT('',(-0.625,-1.8,0.E+000)); +#3048 = VECTOR('',#3049,1.); +#3049 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3050 = ORIENTED_EDGE('',*,*,#3051,.T.); +#3051 = EDGE_CURVE('',#3042,#846,#3052,.T.); +#3052 = LINE('',#3053,#3054); +#3053 = CARTESIAN_POINT('',(-0.625,-1.8,0.E+000)); +#3054 = VECTOR('',#3055,1.); +#3055 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3056 = ORIENTED_EDGE('',*,*,#843,.F.); +#3057 = ORIENTED_EDGE('',*,*,#3058,.F.); +#3058 = EDGE_CURVE('',#3044,#844,#3059,.T.); +#3059 = LINE('',#3060,#3061); +#3060 = CARTESIAN_POINT('',(-0.625,-1.325,0.E+000)); +#3061 = VECTOR('',#3062,1.); +#3062 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3063 = PLANE('',#3064); +#3064 = AXIS2_PLACEMENT_3D('',#3065,#3066,#3067); +#3065 = CARTESIAN_POINT('',(-0.625,-1.8,0.E+000)); +#3066 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3067 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3068 = ADVANCED_FACE('',(#3069),#3087,.F.); +#3069 = FACE_BOUND('',#3070,.F.); +#3070 = EDGE_LOOP('',(#3071,#3079,#3080,#3081)); +#3071 = ORIENTED_EDGE('',*,*,#3072,.F.); +#3072 = EDGE_CURVE('',#3044,#3073,#3075,.T.); +#3073 = VERTEX_POINT('',#3074); +#3074 = CARTESIAN_POINT('',(-0.875,-1.325,0.E+000)); +#3075 = LINE('',#3076,#3077); +#3076 = CARTESIAN_POINT('',(-0.625,-1.325,0.E+000)); +#3077 = VECTOR('',#3078,1.); +#3078 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3079 = ORIENTED_EDGE('',*,*,#3058,.T.); +#3080 = ORIENTED_EDGE('',*,*,#869,.F.); +#3081 = ORIENTED_EDGE('',*,*,#3082,.F.); +#3082 = EDGE_CURVE('',#3073,#862,#3083,.T.); +#3083 = LINE('',#3084,#3085); +#3084 = CARTESIAN_POINT('',(-0.875,-1.325,0.E+000)); +#3085 = VECTOR('',#3086,1.); +#3086 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3087 = PLANE('',#3088); +#3088 = AXIS2_PLACEMENT_3D('',#3089,#3090,#3091); +#3089 = CARTESIAN_POINT('',(-0.625,-1.325,0.E+000)); +#3090 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3091 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3092 = ADVANCED_FACE('',(#3093),#3111,.F.); +#3093 = FACE_BOUND('',#3094,.F.); +#3094 = EDGE_LOOP('',(#3095,#3103,#3109,#3110)); +#3095 = ORIENTED_EDGE('',*,*,#3096,.F.); +#3096 = EDGE_CURVE('',#3097,#3042,#3099,.T.); +#3097 = VERTEX_POINT('',#3098); +#3098 = CARTESIAN_POINT('',(-0.875,-1.8,0.E+000)); +#3099 = LINE('',#3100,#3101); +#3100 = CARTESIAN_POINT('',(-0.875,-1.8,0.E+000)); +#3101 = VECTOR('',#3102,1.); +#3102 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3103 = ORIENTED_EDGE('',*,*,#3104,.T.); +#3104 = EDGE_CURVE('',#3097,#854,#3105,.T.); +#3105 = LINE('',#3106,#3107); +#3106 = CARTESIAN_POINT('',(-0.875,-1.8,0.E+000)); +#3107 = VECTOR('',#3108,1.); +#3108 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3109 = ORIENTED_EDGE('',*,*,#853,.F.); +#3110 = ORIENTED_EDGE('',*,*,#3051,.F.); +#3111 = PLANE('',#3112); +#3112 = AXIS2_PLACEMENT_3D('',#3113,#3114,#3115); +#3113 = CARTESIAN_POINT('',(-0.875,-1.8,0.E+000)); +#3114 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3115 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3116 = ADVANCED_FACE('',(#3117),#3128,.F.); +#3117 = FACE_BOUND('',#3118,.F.); +#3118 = EDGE_LOOP('',(#3119,#3125,#3126,#3127)); +#3119 = ORIENTED_EDGE('',*,*,#3120,.F.); +#3120 = EDGE_CURVE('',#3073,#3097,#3121,.T.); +#3121 = LINE('',#3122,#3123); +#3122 = CARTESIAN_POINT('',(-0.875,-1.325,0.E+000)); +#3123 = VECTOR('',#3124,1.); +#3124 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3125 = ORIENTED_EDGE('',*,*,#3082,.T.); +#3126 = ORIENTED_EDGE('',*,*,#861,.F.); +#3127 = ORIENTED_EDGE('',*,*,#3104,.F.); +#3128 = PLANE('',#3129); +#3129 = AXIS2_PLACEMENT_3D('',#3130,#3131,#3132); +#3130 = CARTESIAN_POINT('',(-0.875,-1.325,0.E+000)); +#3131 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3132 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3133 = ADVANCED_FACE('',(#3134),#3159,.F.); +#3134 = FACE_BOUND('',#3135,.F.); +#3135 = EDGE_LOOP('',(#3136,#3146,#3152,#3153)); +#3136 = ORIENTED_EDGE('',*,*,#3137,.F.); +#3137 = EDGE_CURVE('',#3138,#3140,#3142,.T.); +#3138 = VERTEX_POINT('',#3139); +#3139 = CARTESIAN_POINT('',(-0.375,-1.325,0.E+000)); +#3140 = VERTEX_POINT('',#3141); +#3141 = CARTESIAN_POINT('',(-0.375,-1.8,0.E+000)); +#3142 = LINE('',#3143,#3144); +#3143 = CARTESIAN_POINT('',(-0.375,-1.325,0.E+000)); +#3144 = VECTOR('',#3145,1.); +#3145 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3146 = ORIENTED_EDGE('',*,*,#3147,.T.); +#3147 = EDGE_CURVE('',#3138,#880,#3148,.T.); +#3148 = LINE('',#3149,#3150); +#3149 = CARTESIAN_POINT('',(-0.375,-1.325,0.E+000)); +#3150 = VECTOR('',#3151,1.); +#3151 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3152 = ORIENTED_EDGE('',*,*,#877,.F.); +#3153 = ORIENTED_EDGE('',*,*,#3154,.F.); +#3154 = EDGE_CURVE('',#3140,#878,#3155,.T.); +#3155 = LINE('',#3156,#3157); +#3156 = CARTESIAN_POINT('',(-0.375,-1.8,0.E+000)); +#3157 = VECTOR('',#3158,1.); +#3158 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3159 = PLANE('',#3160); +#3160 = AXIS2_PLACEMENT_3D('',#3161,#3162,#3163); +#3161 = CARTESIAN_POINT('',(-0.375,-1.325,0.E+000)); +#3162 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3163 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3164 = ADVANCED_FACE('',(#3165),#3183,.F.); +#3165 = FACE_BOUND('',#3166,.F.); +#3166 = EDGE_LOOP('',(#3167,#3175,#3176,#3177)); +#3167 = ORIENTED_EDGE('',*,*,#3168,.F.); +#3168 = EDGE_CURVE('',#3140,#3169,#3171,.T.); +#3169 = VERTEX_POINT('',#3170); +#3170 = CARTESIAN_POINT('',(-0.125,-1.8,0.E+000)); +#3171 = LINE('',#3172,#3173); +#3172 = CARTESIAN_POINT('',(-0.375,-1.8,0.E+000)); +#3173 = VECTOR('',#3174,1.); +#3174 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3175 = ORIENTED_EDGE('',*,*,#3154,.T.); +#3176 = ORIENTED_EDGE('',*,*,#903,.F.); +#3177 = ORIENTED_EDGE('',*,*,#3178,.F.); +#3178 = EDGE_CURVE('',#3169,#896,#3179,.T.); +#3179 = LINE('',#3180,#3181); +#3180 = CARTESIAN_POINT('',(-0.125,-1.8,0.E+000)); +#3181 = VECTOR('',#3182,1.); +#3182 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3183 = PLANE('',#3184); +#3184 = AXIS2_PLACEMENT_3D('',#3185,#3186,#3187); +#3185 = CARTESIAN_POINT('',(-0.375,-1.8,0.E+000)); +#3186 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3187 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3188 = ADVANCED_FACE('',(#3189),#3207,.F.); +#3189 = FACE_BOUND('',#3190,.F.); +#3190 = EDGE_LOOP('',(#3191,#3199,#3205,#3206)); +#3191 = ORIENTED_EDGE('',*,*,#3192,.F.); +#3192 = EDGE_CURVE('',#3193,#3138,#3195,.T.); +#3193 = VERTEX_POINT('',#3194); +#3194 = CARTESIAN_POINT('',(-0.125,-1.325,0.E+000)); +#3195 = LINE('',#3196,#3197); +#3196 = CARTESIAN_POINT('',(-0.125,-1.325,0.E+000)); +#3197 = VECTOR('',#3198,1.); +#3198 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3199 = ORIENTED_EDGE('',*,*,#3200,.T.); +#3200 = EDGE_CURVE('',#3193,#888,#3201,.T.); +#3201 = LINE('',#3202,#3203); +#3202 = CARTESIAN_POINT('',(-0.125,-1.325,0.E+000)); +#3203 = VECTOR('',#3204,1.); +#3204 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3205 = ORIENTED_EDGE('',*,*,#887,.F.); +#3206 = ORIENTED_EDGE('',*,*,#3147,.F.); +#3207 = PLANE('',#3208); +#3208 = AXIS2_PLACEMENT_3D('',#3209,#3210,#3211); +#3209 = CARTESIAN_POINT('',(-0.125,-1.325,0.E+000)); +#3210 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3211 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3212 = ADVANCED_FACE('',(#3213),#3224,.F.); +#3213 = FACE_BOUND('',#3214,.F.); +#3214 = EDGE_LOOP('',(#3215,#3221,#3222,#3223)); +#3215 = ORIENTED_EDGE('',*,*,#3216,.F.); +#3216 = EDGE_CURVE('',#3169,#3193,#3217,.T.); +#3217 = LINE('',#3218,#3219); +#3218 = CARTESIAN_POINT('',(-0.125,-1.8,0.E+000)); +#3219 = VECTOR('',#3220,1.); +#3220 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3221 = ORIENTED_EDGE('',*,*,#3178,.T.); +#3222 = ORIENTED_EDGE('',*,*,#895,.F.); +#3223 = ORIENTED_EDGE('',*,*,#3200,.F.); +#3224 = PLANE('',#3225); +#3225 = AXIS2_PLACEMENT_3D('',#3226,#3227,#3228); +#3226 = CARTESIAN_POINT('',(-0.125,-1.8,0.E+000)); +#3227 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3228 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3229 = ADVANCED_FACE('',(#3230),#3255,.F.); +#3230 = FACE_BOUND('',#3231,.F.); +#3231 = EDGE_LOOP('',(#3232,#3242,#3248,#3249)); +#3232 = ORIENTED_EDGE('',*,*,#3233,.F.); +#3233 = EDGE_CURVE('',#3234,#3236,#3238,.T.); +#3234 = VERTEX_POINT('',#3235); +#3235 = CARTESIAN_POINT('',(1.375,-1.325,0.E+000)); +#3236 = VERTEX_POINT('',#3237); +#3237 = CARTESIAN_POINT('',(1.125,-1.325,0.E+000)); +#3238 = LINE('',#3239,#3240); +#3239 = CARTESIAN_POINT('',(1.375,-1.325,0.E+000)); +#3240 = VECTOR('',#3241,1.); +#3241 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3242 = ORIENTED_EDGE('',*,*,#3243,.T.); +#3243 = EDGE_CURVE('',#3234,#914,#3244,.T.); +#3244 = LINE('',#3245,#3246); +#3245 = CARTESIAN_POINT('',(1.375,-1.325,0.E+000)); +#3246 = VECTOR('',#3247,1.); +#3247 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3248 = ORIENTED_EDGE('',*,*,#911,.F.); +#3249 = ORIENTED_EDGE('',*,*,#3250,.F.); +#3250 = EDGE_CURVE('',#3236,#912,#3251,.T.); +#3251 = LINE('',#3252,#3253); +#3252 = CARTESIAN_POINT('',(1.125,-1.325,0.E+000)); +#3253 = VECTOR('',#3254,1.); +#3254 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3255 = PLANE('',#3256); +#3256 = AXIS2_PLACEMENT_3D('',#3257,#3258,#3259); +#3257 = CARTESIAN_POINT('',(1.375,-1.325,0.E+000)); +#3258 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3259 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3260 = ADVANCED_FACE('',(#3261),#3279,.F.); +#3261 = FACE_BOUND('',#3262,.F.); +#3262 = EDGE_LOOP('',(#3263,#3271,#3272,#3273)); +#3263 = ORIENTED_EDGE('',*,*,#3264,.F.); +#3264 = EDGE_CURVE('',#3236,#3265,#3267,.T.); +#3265 = VERTEX_POINT('',#3266); +#3266 = CARTESIAN_POINT('',(1.125,-1.8,0.E+000)); +#3267 = LINE('',#3268,#3269); +#3268 = CARTESIAN_POINT('',(1.125,-1.325,0.E+000)); +#3269 = VECTOR('',#3270,1.); +#3270 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3271 = ORIENTED_EDGE('',*,*,#3250,.T.); +#3272 = ORIENTED_EDGE('',*,*,#937,.F.); +#3273 = ORIENTED_EDGE('',*,*,#3274,.F.); +#3274 = EDGE_CURVE('',#3265,#930,#3275,.T.); +#3275 = LINE('',#3276,#3277); +#3276 = CARTESIAN_POINT('',(1.125,-1.8,0.E+000)); +#3277 = VECTOR('',#3278,1.); +#3278 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3279 = PLANE('',#3280); +#3280 = AXIS2_PLACEMENT_3D('',#3281,#3282,#3283); +#3281 = CARTESIAN_POINT('',(1.125,-1.325,0.E+000)); +#3282 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3283 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3284 = ADVANCED_FACE('',(#3285),#3303,.F.); +#3285 = FACE_BOUND('',#3286,.F.); +#3286 = EDGE_LOOP('',(#3287,#3295,#3301,#3302)); +#3287 = ORIENTED_EDGE('',*,*,#3288,.F.); +#3288 = EDGE_CURVE('',#3289,#3234,#3291,.T.); +#3289 = VERTEX_POINT('',#3290); +#3290 = CARTESIAN_POINT('',(1.375,-1.8,0.E+000)); +#3291 = LINE('',#3292,#3293); +#3292 = CARTESIAN_POINT('',(1.375,-1.8,0.E+000)); +#3293 = VECTOR('',#3294,1.); +#3294 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3295 = ORIENTED_EDGE('',*,*,#3296,.T.); +#3296 = EDGE_CURVE('',#3289,#922,#3297,.T.); +#3297 = LINE('',#3298,#3299); +#3298 = CARTESIAN_POINT('',(1.375,-1.8,0.E+000)); +#3299 = VECTOR('',#3300,1.); +#3300 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3301 = ORIENTED_EDGE('',*,*,#921,.F.); +#3302 = ORIENTED_EDGE('',*,*,#3243,.F.); +#3303 = PLANE('',#3304); +#3304 = AXIS2_PLACEMENT_3D('',#3305,#3306,#3307); +#3305 = CARTESIAN_POINT('',(1.375,-1.8,0.E+000)); +#3306 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3307 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3308 = ADVANCED_FACE('',(#3309),#3320,.F.); +#3309 = FACE_BOUND('',#3310,.F.); +#3310 = EDGE_LOOP('',(#3311,#3317,#3318,#3319)); +#3311 = ORIENTED_EDGE('',*,*,#3312,.F.); +#3312 = EDGE_CURVE('',#3265,#3289,#3313,.T.); +#3313 = LINE('',#3314,#3315); +#3314 = CARTESIAN_POINT('',(1.125,-1.8,0.E+000)); +#3315 = VECTOR('',#3316,1.); +#3316 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3317 = ORIENTED_EDGE('',*,*,#3274,.T.); +#3318 = ORIENTED_EDGE('',*,*,#929,.F.); +#3319 = ORIENTED_EDGE('',*,*,#3296,.F.); +#3320 = PLANE('',#3321); +#3321 = AXIS2_PLACEMENT_3D('',#3322,#3323,#3324); +#3322 = CARTESIAN_POINT('',(1.125,-1.8,0.E+000)); +#3323 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3324 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3325 = ADVANCED_FACE('',(#3326),#3351,.F.); +#3326 = FACE_BOUND('',#3327,.F.); +#3327 = EDGE_LOOP('',(#3328,#3338,#3344,#3345)); +#3328 = ORIENTED_EDGE('',*,*,#3329,.F.); +#3329 = EDGE_CURVE('',#3330,#3332,#3334,.T.); +#3330 = VERTEX_POINT('',#3331); +#3331 = CARTESIAN_POINT('',(0.875,-1.8,0.E+000)); +#3332 = VERTEX_POINT('',#3333); +#3333 = CARTESIAN_POINT('',(0.875,-1.325,0.E+000)); +#3334 = LINE('',#3335,#3336); +#3335 = CARTESIAN_POINT('',(0.875,-1.8,0.E+000)); +#3336 = VECTOR('',#3337,1.); +#3337 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3338 = ORIENTED_EDGE('',*,*,#3339,.T.); +#3339 = EDGE_CURVE('',#3330,#948,#3340,.T.); +#3340 = LINE('',#3341,#3342); +#3341 = CARTESIAN_POINT('',(0.875,-1.8,0.E+000)); +#3342 = VECTOR('',#3343,1.); +#3343 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3344 = ORIENTED_EDGE('',*,*,#945,.F.); +#3345 = ORIENTED_EDGE('',*,*,#3346,.F.); +#3346 = EDGE_CURVE('',#3332,#946,#3347,.T.); +#3347 = LINE('',#3348,#3349); +#3348 = CARTESIAN_POINT('',(0.875,-1.325,0.E+000)); +#3349 = VECTOR('',#3350,1.); +#3350 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3351 = PLANE('',#3352); +#3352 = AXIS2_PLACEMENT_3D('',#3353,#3354,#3355); +#3353 = CARTESIAN_POINT('',(0.875,-1.8,0.E+000)); +#3354 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3355 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3356 = ADVANCED_FACE('',(#3357),#3375,.F.); +#3357 = FACE_BOUND('',#3358,.F.); +#3358 = EDGE_LOOP('',(#3359,#3367,#3368,#3369)); +#3359 = ORIENTED_EDGE('',*,*,#3360,.F.); +#3360 = EDGE_CURVE('',#3332,#3361,#3363,.T.); +#3361 = VERTEX_POINT('',#3362); +#3362 = CARTESIAN_POINT('',(0.625,-1.325,0.E+000)); +#3363 = LINE('',#3364,#3365); +#3364 = CARTESIAN_POINT('',(0.875,-1.325,0.E+000)); +#3365 = VECTOR('',#3366,1.); +#3366 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3367 = ORIENTED_EDGE('',*,*,#3346,.T.); +#3368 = ORIENTED_EDGE('',*,*,#971,.F.); +#3369 = ORIENTED_EDGE('',*,*,#3370,.F.); +#3370 = EDGE_CURVE('',#3361,#964,#3371,.T.); +#3371 = LINE('',#3372,#3373); +#3372 = CARTESIAN_POINT('',(0.625,-1.325,0.E+000)); +#3373 = VECTOR('',#3374,1.); +#3374 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3375 = PLANE('',#3376); +#3376 = AXIS2_PLACEMENT_3D('',#3377,#3378,#3379); +#3377 = CARTESIAN_POINT('',(0.875,-1.325,0.E+000)); +#3378 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3379 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3380 = ADVANCED_FACE('',(#3381),#3399,.F.); +#3381 = FACE_BOUND('',#3382,.F.); +#3382 = EDGE_LOOP('',(#3383,#3391,#3397,#3398)); +#3383 = ORIENTED_EDGE('',*,*,#3384,.F.); +#3384 = EDGE_CURVE('',#3385,#3330,#3387,.T.); +#3385 = VERTEX_POINT('',#3386); +#3386 = CARTESIAN_POINT('',(0.625,-1.8,0.E+000)); +#3387 = LINE('',#3388,#3389); +#3388 = CARTESIAN_POINT('',(0.625,-1.8,0.E+000)); +#3389 = VECTOR('',#3390,1.); +#3390 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3391 = ORIENTED_EDGE('',*,*,#3392,.T.); +#3392 = EDGE_CURVE('',#3385,#956,#3393,.T.); +#3393 = LINE('',#3394,#3395); +#3394 = CARTESIAN_POINT('',(0.625,-1.8,0.E+000)); +#3395 = VECTOR('',#3396,1.); +#3396 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3397 = ORIENTED_EDGE('',*,*,#955,.F.); +#3398 = ORIENTED_EDGE('',*,*,#3339,.F.); +#3399 = PLANE('',#3400); +#3400 = AXIS2_PLACEMENT_3D('',#3401,#3402,#3403); +#3401 = CARTESIAN_POINT('',(0.625,-1.8,0.E+000)); +#3402 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3403 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3404 = ADVANCED_FACE('',(#3405),#3416,.F.); +#3405 = FACE_BOUND('',#3406,.F.); +#3406 = EDGE_LOOP('',(#3407,#3413,#3414,#3415)); +#3407 = ORIENTED_EDGE('',*,*,#3408,.F.); +#3408 = EDGE_CURVE('',#3361,#3385,#3409,.T.); +#3409 = LINE('',#3410,#3411); +#3410 = CARTESIAN_POINT('',(0.625,-1.325,0.E+000)); +#3411 = VECTOR('',#3412,1.); +#3412 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3413 = ORIENTED_EDGE('',*,*,#3370,.T.); +#3414 = ORIENTED_EDGE('',*,*,#963,.F.); +#3415 = ORIENTED_EDGE('',*,*,#3392,.F.); +#3416 = PLANE('',#3417); +#3417 = AXIS2_PLACEMENT_3D('',#3418,#3419,#3420); +#3418 = CARTESIAN_POINT('',(0.625,-1.325,0.E+000)); +#3419 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3420 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3421 = ADVANCED_FACE('',(#3422),#3447,.F.); +#3422 = FACE_BOUND('',#3423,.F.); +#3423 = EDGE_LOOP('',(#3424,#3434,#3440,#3441)); +#3424 = ORIENTED_EDGE('',*,*,#3425,.F.); +#3425 = EDGE_CURVE('',#3426,#3428,#3430,.T.); +#3426 = VERTEX_POINT('',#3427); +#3427 = CARTESIAN_POINT('',(0.375,-1.325,0.E+000)); +#3428 = VERTEX_POINT('',#3429); +#3429 = CARTESIAN_POINT('',(0.125,-1.325,0.E+000)); +#3430 = LINE('',#3431,#3432); +#3431 = CARTESIAN_POINT('',(0.375,-1.325,0.E+000)); +#3432 = VECTOR('',#3433,1.); +#3433 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3434 = ORIENTED_EDGE('',*,*,#3435,.T.); +#3435 = EDGE_CURVE('',#3426,#982,#3436,.T.); +#3436 = LINE('',#3437,#3438); +#3437 = CARTESIAN_POINT('',(0.375,-1.325,0.E+000)); +#3438 = VECTOR('',#3439,1.); +#3439 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3440 = ORIENTED_EDGE('',*,*,#979,.F.); +#3441 = ORIENTED_EDGE('',*,*,#3442,.F.); +#3442 = EDGE_CURVE('',#3428,#980,#3443,.T.); +#3443 = LINE('',#3444,#3445); +#3444 = CARTESIAN_POINT('',(0.125,-1.325,0.E+000)); +#3445 = VECTOR('',#3446,1.); +#3446 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3447 = PLANE('',#3448); +#3448 = AXIS2_PLACEMENT_3D('',#3449,#3450,#3451); +#3449 = CARTESIAN_POINT('',(0.375,-1.325,0.E+000)); +#3450 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3451 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3452 = ADVANCED_FACE('',(#3453),#3471,.F.); +#3453 = FACE_BOUND('',#3454,.F.); +#3454 = EDGE_LOOP('',(#3455,#3463,#3464,#3465)); +#3455 = ORIENTED_EDGE('',*,*,#3456,.F.); +#3456 = EDGE_CURVE('',#3428,#3457,#3459,.T.); +#3457 = VERTEX_POINT('',#3458); +#3458 = CARTESIAN_POINT('',(0.125,-1.8,0.E+000)); +#3459 = LINE('',#3460,#3461); +#3460 = CARTESIAN_POINT('',(0.125,-1.325,0.E+000)); +#3461 = VECTOR('',#3462,1.); +#3462 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3463 = ORIENTED_EDGE('',*,*,#3442,.T.); +#3464 = ORIENTED_EDGE('',*,*,#1005,.F.); +#3465 = ORIENTED_EDGE('',*,*,#3466,.F.); +#3466 = EDGE_CURVE('',#3457,#998,#3467,.T.); +#3467 = LINE('',#3468,#3469); +#3468 = CARTESIAN_POINT('',(0.125,-1.8,0.E+000)); +#3469 = VECTOR('',#3470,1.); +#3470 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3471 = PLANE('',#3472); +#3472 = AXIS2_PLACEMENT_3D('',#3473,#3474,#3475); +#3473 = CARTESIAN_POINT('',(0.125,-1.325,0.E+000)); +#3474 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3475 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3476 = ADVANCED_FACE('',(#3477),#3495,.F.); +#3477 = FACE_BOUND('',#3478,.F.); +#3478 = EDGE_LOOP('',(#3479,#3487,#3493,#3494)); +#3479 = ORIENTED_EDGE('',*,*,#3480,.F.); +#3480 = EDGE_CURVE('',#3481,#3426,#3483,.T.); +#3481 = VERTEX_POINT('',#3482); +#3482 = CARTESIAN_POINT('',(0.375,-1.8,0.E+000)); +#3483 = LINE('',#3484,#3485); +#3484 = CARTESIAN_POINT('',(0.375,-1.8,0.E+000)); +#3485 = VECTOR('',#3486,1.); +#3486 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3487 = ORIENTED_EDGE('',*,*,#3488,.T.); +#3488 = EDGE_CURVE('',#3481,#990,#3489,.T.); +#3489 = LINE('',#3490,#3491); +#3490 = CARTESIAN_POINT('',(0.375,-1.8,0.E+000)); +#3491 = VECTOR('',#3492,1.); +#3492 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3493 = ORIENTED_EDGE('',*,*,#989,.F.); +#3494 = ORIENTED_EDGE('',*,*,#3435,.F.); +#3495 = PLANE('',#3496); +#3496 = AXIS2_PLACEMENT_3D('',#3497,#3498,#3499); +#3497 = CARTESIAN_POINT('',(0.375,-1.8,0.E+000)); +#3498 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3499 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3500 = ADVANCED_FACE('',(#3501),#3512,.F.); +#3501 = FACE_BOUND('',#3502,.F.); +#3502 = EDGE_LOOP('',(#3503,#3509,#3510,#3511)); +#3503 = ORIENTED_EDGE('',*,*,#3504,.F.); +#3504 = EDGE_CURVE('',#3457,#3481,#3505,.T.); +#3505 = LINE('',#3506,#3507); +#3506 = CARTESIAN_POINT('',(0.125,-1.8,0.E+000)); +#3507 = VECTOR('',#3508,1.); +#3508 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3509 = ORIENTED_EDGE('',*,*,#3466,.T.); +#3510 = ORIENTED_EDGE('',*,*,#997,.F.); +#3511 = ORIENTED_EDGE('',*,*,#3488,.F.); +#3512 = PLANE('',#3513); +#3513 = AXIS2_PLACEMENT_3D('',#3514,#3515,#3516); +#3514 = CARTESIAN_POINT('',(0.125,-1.8,0.E+000)); +#3515 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3516 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3517 = ADVANCED_FACE('',(#3518),#3543,.F.); +#3518 = FACE_BOUND('',#3519,.F.); +#3519 = EDGE_LOOP('',(#3520,#3530,#3536,#3537)); +#3520 = ORIENTED_EDGE('',*,*,#3521,.F.); +#3521 = EDGE_CURVE('',#3522,#3524,#3526,.T.); +#3522 = VERTEX_POINT('',#3523); +#3523 = CARTESIAN_POINT('',(2.125,-1.8,0.E+000)); +#3524 = VERTEX_POINT('',#3525); +#3525 = CARTESIAN_POINT('',(2.375,-1.8,0.E+000)); +#3526 = LINE('',#3527,#3528); +#3527 = CARTESIAN_POINT('',(2.125,-1.8,0.E+000)); +#3528 = VECTOR('',#3529,1.); +#3529 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3530 = ORIENTED_EDGE('',*,*,#3531,.T.); +#3531 = EDGE_CURVE('',#3522,#1016,#3532,.T.); +#3532 = LINE('',#3533,#3534); +#3533 = CARTESIAN_POINT('',(2.125,-1.8,0.E+000)); +#3534 = VECTOR('',#3535,1.); +#3535 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3536 = ORIENTED_EDGE('',*,*,#1013,.F.); +#3537 = ORIENTED_EDGE('',*,*,#3538,.F.); +#3538 = EDGE_CURVE('',#3524,#1014,#3539,.T.); +#3539 = LINE('',#3540,#3541); +#3540 = CARTESIAN_POINT('',(2.375,-1.8,0.E+000)); +#3541 = VECTOR('',#3542,1.); +#3542 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3543 = PLANE('',#3544); +#3544 = AXIS2_PLACEMENT_3D('',#3545,#3546,#3547); +#3545 = CARTESIAN_POINT('',(2.125,-1.8,0.E+000)); +#3546 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3547 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3548 = ADVANCED_FACE('',(#3549),#3567,.F.); +#3549 = FACE_BOUND('',#3550,.F.); +#3550 = EDGE_LOOP('',(#3551,#3559,#3560,#3561)); +#3551 = ORIENTED_EDGE('',*,*,#3552,.F.); +#3552 = EDGE_CURVE('',#3524,#3553,#3555,.T.); +#3553 = VERTEX_POINT('',#3554); +#3554 = CARTESIAN_POINT('',(2.375,-1.325,0.E+000)); +#3555 = LINE('',#3556,#3557); +#3556 = CARTESIAN_POINT('',(2.375,-1.8,0.E+000)); +#3557 = VECTOR('',#3558,1.); +#3558 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3559 = ORIENTED_EDGE('',*,*,#3538,.T.); +#3560 = ORIENTED_EDGE('',*,*,#1039,.F.); +#3561 = ORIENTED_EDGE('',*,*,#3562,.F.); +#3562 = EDGE_CURVE('',#3553,#1032,#3563,.T.); +#3563 = LINE('',#3564,#3565); +#3564 = CARTESIAN_POINT('',(2.375,-1.325,0.E+000)); +#3565 = VECTOR('',#3566,1.); +#3566 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3567 = PLANE('',#3568); +#3568 = AXIS2_PLACEMENT_3D('',#3569,#3570,#3571); +#3569 = CARTESIAN_POINT('',(2.375,-1.8,0.E+000)); +#3570 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3571 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3572 = ADVANCED_FACE('',(#3573),#3591,.F.); +#3573 = FACE_BOUND('',#3574,.F.); +#3574 = EDGE_LOOP('',(#3575,#3583,#3589,#3590)); +#3575 = ORIENTED_EDGE('',*,*,#3576,.F.); +#3576 = EDGE_CURVE('',#3577,#3522,#3579,.T.); +#3577 = VERTEX_POINT('',#3578); +#3578 = CARTESIAN_POINT('',(2.125,-1.325,0.E+000)); +#3579 = LINE('',#3580,#3581); +#3580 = CARTESIAN_POINT('',(2.125,-1.325,0.E+000)); +#3581 = VECTOR('',#3582,1.); +#3582 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3583 = ORIENTED_EDGE('',*,*,#3584,.T.); +#3584 = EDGE_CURVE('',#3577,#1024,#3585,.T.); +#3585 = LINE('',#3586,#3587); +#3586 = CARTESIAN_POINT('',(2.125,-1.325,0.E+000)); +#3587 = VECTOR('',#3588,1.); +#3588 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3589 = ORIENTED_EDGE('',*,*,#1023,.F.); +#3590 = ORIENTED_EDGE('',*,*,#3531,.F.); +#3591 = PLANE('',#3592); +#3592 = AXIS2_PLACEMENT_3D('',#3593,#3594,#3595); +#3593 = CARTESIAN_POINT('',(2.125,-1.325,0.E+000)); +#3594 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3595 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3596 = ADVANCED_FACE('',(#3597),#3608,.F.); +#3597 = FACE_BOUND('',#3598,.F.); +#3598 = EDGE_LOOP('',(#3599,#3605,#3606,#3607)); +#3599 = ORIENTED_EDGE('',*,*,#3600,.F.); +#3600 = EDGE_CURVE('',#3553,#3577,#3601,.T.); +#3601 = LINE('',#3602,#3603); +#3602 = CARTESIAN_POINT('',(2.375,-1.325,0.E+000)); +#3603 = VECTOR('',#3604,1.); +#3604 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3605 = ORIENTED_EDGE('',*,*,#3562,.T.); +#3606 = ORIENTED_EDGE('',*,*,#1031,.F.); +#3607 = ORIENTED_EDGE('',*,*,#3584,.F.); +#3608 = PLANE('',#3609); +#3609 = AXIS2_PLACEMENT_3D('',#3610,#3611,#3612); +#3610 = CARTESIAN_POINT('',(2.375,-1.325,0.E+000)); +#3611 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3612 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3613 = ADVANCED_FACE('',(#3614),#3639,.F.); +#3614 = FACE_BOUND('',#3615,.F.); +#3615 = EDGE_LOOP('',(#3616,#3626,#3632,#3633)); +#3616 = ORIENTED_EDGE('',*,*,#3617,.F.); +#3617 = EDGE_CURVE('',#3618,#3620,#3622,.T.); +#3618 = VERTEX_POINT('',#3619); +#3619 = CARTESIAN_POINT('',(1.875,-1.8,0.E+000)); +#3620 = VERTEX_POINT('',#3621); +#3621 = CARTESIAN_POINT('',(1.875,-1.325,0.E+000)); +#3622 = LINE('',#3623,#3624); +#3623 = CARTESIAN_POINT('',(1.875,-1.8,0.E+000)); +#3624 = VECTOR('',#3625,1.); +#3625 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3626 = ORIENTED_EDGE('',*,*,#3627,.T.); +#3627 = EDGE_CURVE('',#3618,#1050,#3628,.T.); +#3628 = LINE('',#3629,#3630); +#3629 = CARTESIAN_POINT('',(1.875,-1.8,0.E+000)); +#3630 = VECTOR('',#3631,1.); +#3631 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3632 = ORIENTED_EDGE('',*,*,#1047,.F.); +#3633 = ORIENTED_EDGE('',*,*,#3634,.F.); +#3634 = EDGE_CURVE('',#3620,#1048,#3635,.T.); +#3635 = LINE('',#3636,#3637); +#3636 = CARTESIAN_POINT('',(1.875,-1.325,0.E+000)); +#3637 = VECTOR('',#3638,1.); +#3638 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3639 = PLANE('',#3640); +#3640 = AXIS2_PLACEMENT_3D('',#3641,#3642,#3643); +#3641 = CARTESIAN_POINT('',(1.875,-1.8,0.E+000)); +#3642 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3643 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3644 = ADVANCED_FACE('',(#3645),#3663,.F.); +#3645 = FACE_BOUND('',#3646,.F.); +#3646 = EDGE_LOOP('',(#3647,#3655,#3656,#3657)); +#3647 = ORIENTED_EDGE('',*,*,#3648,.F.); +#3648 = EDGE_CURVE('',#3620,#3649,#3651,.T.); +#3649 = VERTEX_POINT('',#3650); +#3650 = CARTESIAN_POINT('',(1.625,-1.325,0.E+000)); +#3651 = LINE('',#3652,#3653); +#3652 = CARTESIAN_POINT('',(1.875,-1.325,0.E+000)); +#3653 = VECTOR('',#3654,1.); +#3654 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3655 = ORIENTED_EDGE('',*,*,#3634,.T.); +#3656 = ORIENTED_EDGE('',*,*,#1073,.F.); +#3657 = ORIENTED_EDGE('',*,*,#3658,.F.); +#3658 = EDGE_CURVE('',#3649,#1066,#3659,.T.); +#3659 = LINE('',#3660,#3661); +#3660 = CARTESIAN_POINT('',(1.625,-1.325,0.E+000)); +#3661 = VECTOR('',#3662,1.); +#3662 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3663 = PLANE('',#3664); +#3664 = AXIS2_PLACEMENT_3D('',#3665,#3666,#3667); +#3665 = CARTESIAN_POINT('',(1.875,-1.325,0.E+000)); +#3666 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3667 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3668 = ADVANCED_FACE('',(#3669),#3687,.F.); +#3669 = FACE_BOUND('',#3670,.F.); +#3670 = EDGE_LOOP('',(#3671,#3679,#3685,#3686)); +#3671 = ORIENTED_EDGE('',*,*,#3672,.F.); +#3672 = EDGE_CURVE('',#3673,#3618,#3675,.T.); +#3673 = VERTEX_POINT('',#3674); +#3674 = CARTESIAN_POINT('',(1.625,-1.8,0.E+000)); +#3675 = LINE('',#3676,#3677); +#3676 = CARTESIAN_POINT('',(1.625,-1.8,0.E+000)); +#3677 = VECTOR('',#3678,1.); +#3678 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3679 = ORIENTED_EDGE('',*,*,#3680,.T.); +#3680 = EDGE_CURVE('',#3673,#1058,#3681,.T.); +#3681 = LINE('',#3682,#3683); +#3682 = CARTESIAN_POINT('',(1.625,-1.8,0.E+000)); +#3683 = VECTOR('',#3684,1.); +#3684 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3685 = ORIENTED_EDGE('',*,*,#1057,.F.); +#3686 = ORIENTED_EDGE('',*,*,#3627,.F.); +#3687 = PLANE('',#3688); +#3688 = AXIS2_PLACEMENT_3D('',#3689,#3690,#3691); +#3689 = CARTESIAN_POINT('',(1.625,-1.8,0.E+000)); +#3690 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3691 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3692 = ADVANCED_FACE('',(#3693),#3704,.F.); +#3693 = FACE_BOUND('',#3694,.F.); +#3694 = EDGE_LOOP('',(#3695,#3701,#3702,#3703)); +#3695 = ORIENTED_EDGE('',*,*,#3696,.F.); +#3696 = EDGE_CURVE('',#3649,#3673,#3697,.T.); +#3697 = LINE('',#3698,#3699); +#3698 = CARTESIAN_POINT('',(1.625,-1.325,0.E+000)); +#3699 = VECTOR('',#3700,1.); +#3700 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3701 = ORIENTED_EDGE('',*,*,#3658,.T.); +#3702 = ORIENTED_EDGE('',*,*,#1065,.F.); +#3703 = ORIENTED_EDGE('',*,*,#3680,.F.); +#3704 = PLANE('',#3705); +#3705 = AXIS2_PLACEMENT_3D('',#3706,#3707,#3708); +#3706 = CARTESIAN_POINT('',(1.625,-1.325,0.E+000)); +#3707 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3708 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3709 = ADVANCED_FACE('',(#3710),#3735,.F.); +#3710 = FACE_BOUND('',#3711,.F.); +#3711 = EDGE_LOOP('',(#3712,#3722,#3728,#3729)); +#3712 = ORIENTED_EDGE('',*,*,#3713,.F.); +#3713 = EDGE_CURVE('',#3714,#3716,#3718,.T.); +#3714 = VERTEX_POINT('',#3715); +#3715 = CARTESIAN_POINT('',(-2.375,-1.8,0.E+000)); +#3716 = VERTEX_POINT('',#3717); +#3717 = CARTESIAN_POINT('',(-2.125,-1.8,0.E+000)); +#3718 = LINE('',#3719,#3720); +#3719 = CARTESIAN_POINT('',(-2.375,-1.8,0.E+000)); +#3720 = VECTOR('',#3721,1.); +#3721 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3722 = ORIENTED_EDGE('',*,*,#3723,.T.); +#3723 = EDGE_CURVE('',#3714,#1084,#3724,.T.); +#3724 = LINE('',#3725,#3726); +#3725 = CARTESIAN_POINT('',(-2.375,-1.8,0.E+000)); +#3726 = VECTOR('',#3727,1.); +#3727 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3728 = ORIENTED_EDGE('',*,*,#1081,.F.); +#3729 = ORIENTED_EDGE('',*,*,#3730,.F.); +#3730 = EDGE_CURVE('',#3716,#1082,#3731,.T.); +#3731 = LINE('',#3732,#3733); +#3732 = CARTESIAN_POINT('',(-2.125,-1.8,0.E+000)); +#3733 = VECTOR('',#3734,1.); +#3734 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3735 = PLANE('',#3736); +#3736 = AXIS2_PLACEMENT_3D('',#3737,#3738,#3739); +#3737 = CARTESIAN_POINT('',(-2.375,-1.8,0.E+000)); +#3738 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3739 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3740 = ADVANCED_FACE('',(#3741),#3759,.F.); +#3741 = FACE_BOUND('',#3742,.F.); +#3742 = EDGE_LOOP('',(#3743,#3751,#3752,#3753)); +#3743 = ORIENTED_EDGE('',*,*,#3744,.F.); +#3744 = EDGE_CURVE('',#3716,#3745,#3747,.T.); +#3745 = VERTEX_POINT('',#3746); +#3746 = CARTESIAN_POINT('',(-2.125,-1.325,0.E+000)); +#3747 = LINE('',#3748,#3749); +#3748 = CARTESIAN_POINT('',(-2.125,-1.8,0.E+000)); +#3749 = VECTOR('',#3750,1.); +#3750 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3751 = ORIENTED_EDGE('',*,*,#3730,.T.); +#3752 = ORIENTED_EDGE('',*,*,#1107,.F.); +#3753 = ORIENTED_EDGE('',*,*,#3754,.F.); +#3754 = EDGE_CURVE('',#3745,#1100,#3755,.T.); +#3755 = LINE('',#3756,#3757); +#3756 = CARTESIAN_POINT('',(-2.125,-1.325,0.E+000)); +#3757 = VECTOR('',#3758,1.); +#3758 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3759 = PLANE('',#3760); +#3760 = AXIS2_PLACEMENT_3D('',#3761,#3762,#3763); +#3761 = CARTESIAN_POINT('',(-2.125,-1.8,0.E+000)); +#3762 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3763 = DIRECTION('',(5.665538897648E-016,1.,0.E+000)); +#3764 = ADVANCED_FACE('',(#3765),#3783,.F.); +#3765 = FACE_BOUND('',#3766,.F.); +#3766 = EDGE_LOOP('',(#3767,#3775,#3781,#3782)); +#3767 = ORIENTED_EDGE('',*,*,#3768,.F.); +#3768 = EDGE_CURVE('',#3769,#3714,#3771,.T.); +#3769 = VERTEX_POINT('',#3770); +#3770 = CARTESIAN_POINT('',(-2.375,-1.325,0.E+000)); +#3771 = LINE('',#3772,#3773); +#3772 = CARTESIAN_POINT('',(-2.375,-1.325,0.E+000)); +#3773 = VECTOR('',#3774,1.); +#3774 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3775 = ORIENTED_EDGE('',*,*,#3776,.T.); +#3776 = EDGE_CURVE('',#3769,#1092,#3777,.T.); +#3777 = LINE('',#3778,#3779); +#3778 = CARTESIAN_POINT('',(-2.375,-1.325,0.E+000)); +#3779 = VECTOR('',#3780,1.); +#3780 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3781 = ORIENTED_EDGE('',*,*,#1091,.F.); +#3782 = ORIENTED_EDGE('',*,*,#3723,.F.); +#3783 = PLANE('',#3784); +#3784 = AXIS2_PLACEMENT_3D('',#3785,#3786,#3787); +#3785 = CARTESIAN_POINT('',(-2.375,-1.325,0.E+000)); +#3786 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#3787 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3788 = ADVANCED_FACE('',(#3789),#3800,.F.); +#3789 = FACE_BOUND('',#3790,.F.); +#3790 = EDGE_LOOP('',(#3791,#3797,#3798,#3799)); +#3791 = ORIENTED_EDGE('',*,*,#3792,.F.); +#3792 = EDGE_CURVE('',#3745,#3769,#3793,.T.); +#3793 = LINE('',#3794,#3795); +#3794 = CARTESIAN_POINT('',(-2.125,-1.325,0.E+000)); +#3795 = VECTOR('',#3796,1.); +#3796 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3797 = ORIENTED_EDGE('',*,*,#3754,.T.); +#3798 = ORIENTED_EDGE('',*,*,#1099,.F.); +#3799 = ORIENTED_EDGE('',*,*,#3776,.F.); +#3800 = PLANE('',#3801); +#3801 = AXIS2_PLACEMENT_3D('',#3802,#3803,#3804); +#3802 = CARTESIAN_POINT('',(-2.125,-1.325,0.E+000)); +#3803 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000)); +#3804 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000)); +#3805 = ADVANCED_FACE('',(#3806,#3812),#3823,.T.); +#3806 = FACE_BOUND('',#3807,.T.); +#3807 = EDGE_LOOP('',(#3808,#3809,#3810,#3811)); +#3808 = ORIENTED_EDGE('',*,*,#1138,.F.); +#3809 = ORIENTED_EDGE('',*,*,#1178,.T.); +#3810 = ORIENTED_EDGE('',*,*,#1203,.T.); +#3811 = ORIENTED_EDGE('',*,*,#1154,.F.); +#3812 = FACE_BOUND('',#3813,.T.); +#3813 = EDGE_LOOP('',(#3814)); +#3814 = ORIENTED_EDGE('',*,*,#3815,.T.); +#3815 = EDGE_CURVE('',#3816,#3816,#3818,.T.); +#3816 = VERTEX_POINT('',#3817); +#3817 = CARTESIAN_POINT('',(-2.15,1.275,1.025)); +#3818 = CIRCLE('',#3819,0.175); +#3819 = AXIS2_PLACEMENT_3D('',#3820,#3821,#3822); +#3820 = CARTESIAN_POINT('',(-2.15,1.45,1.025)); +#3821 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#3822 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#3823 = PLANE('',#3824); +#3824 = AXIS2_PLACEMENT_3D('',#3825,#3826,#3827); +#3825 = CARTESIAN_POINT('',(-2.6,1.9,1.025)); +#3826 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3827 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#3828 = ADVANCED_FACE('',(#3829),#3835,.F.); +#3829 = FACE_BOUND('',#3830,.F.); +#3830 = EDGE_LOOP('',(#3831,#3832,#3833,#3834)); +#3831 = ORIENTED_EDGE('',*,*,#1272,.T.); +#3832 = ORIENTED_EDGE('',*,*,#1217,.T.); +#3833 = ORIENTED_EDGE('',*,*,#1248,.T.); +#3834 = ORIENTED_EDGE('',*,*,#1296,.T.); +#3835 = PLANE('',#3836); +#3836 = AXIS2_PLACEMENT_3D('',#3837,#3838,#3839); +#3837 = CARTESIAN_POINT('',(-1.25,1.5625,0.E+000)); +#3838 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3839 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#3840 = ADVANCED_FACE('',(#3841),#3847,.F.); +#3841 = FACE_BOUND('',#3842,.F.); +#3842 = EDGE_LOOP('',(#3843,#3844,#3845,#3846)); +#3843 = ORIENTED_EDGE('',*,*,#1313,.T.); +#3844 = ORIENTED_EDGE('',*,*,#1344,.T.); +#3845 = ORIENTED_EDGE('',*,*,#1392,.T.); +#3846 = ORIENTED_EDGE('',*,*,#1368,.T.); +#3847 = PLANE('',#3848); +#3848 = AXIS2_PLACEMENT_3D('',#3849,#3850,#3851); +#3849 = CARTESIAN_POINT('',(-0.75,1.5625,0.E+000)); +#3850 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3851 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#3852 = ADVANCED_FACE('',(#3853),#3859,.F.); +#3853 = FACE_BOUND('',#3854,.F.); +#3854 = EDGE_LOOP('',(#3855,#3856,#3857,#3858)); +#3855 = ORIENTED_EDGE('',*,*,#1409,.T.); +#3856 = ORIENTED_EDGE('',*,*,#1440,.T.); +#3857 = ORIENTED_EDGE('',*,*,#1488,.T.); +#3858 = ORIENTED_EDGE('',*,*,#1464,.T.); +#3859 = PLANE('',#3860); +#3860 = AXIS2_PLACEMENT_3D('',#3861,#3862,#3863); +#3861 = CARTESIAN_POINT('',(-0.25,1.5625,0.E+000)); +#3862 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3863 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#3864 = ADVANCED_FACE('',(#3865),#3871,.F.); +#3865 = FACE_BOUND('',#3866,.F.); +#3866 = EDGE_LOOP('',(#3867,#3868,#3869,#3870)); +#3867 = ORIENTED_EDGE('',*,*,#1536,.T.); +#3868 = ORIENTED_EDGE('',*,*,#1584,.T.); +#3869 = ORIENTED_EDGE('',*,*,#1560,.T.); +#3870 = ORIENTED_EDGE('',*,*,#1505,.T.); +#3871 = PLANE('',#3872); +#3872 = AXIS2_PLACEMENT_3D('',#3873,#3874,#3875); +#3873 = CARTESIAN_POINT('',(0.75,1.5625,0.E+000)); +#3874 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3875 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#3876 = ADVANCED_FACE('',(#3877),#3883,.F.); +#3877 = FACE_BOUND('',#3878,.F.); +#3878 = EDGE_LOOP('',(#3879,#3880,#3881,#3882)); +#3879 = ORIENTED_EDGE('',*,*,#1680,.T.); +#3880 = ORIENTED_EDGE('',*,*,#1656,.T.); +#3881 = ORIENTED_EDGE('',*,*,#1601,.T.); +#3882 = ORIENTED_EDGE('',*,*,#1632,.T.); +#3883 = PLANE('',#3884); +#3884 = AXIS2_PLACEMENT_3D('',#3885,#3886,#3887); +#3885 = CARTESIAN_POINT('',(0.25,1.5625,0.E+000)); +#3886 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3887 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#3888 = ADVANCED_FACE('',(#3889),#3895,.F.); +#3889 = FACE_BOUND('',#3890,.F.); +#3890 = EDGE_LOOP('',(#3891,#3892,#3893,#3894)); +#3891 = ORIENTED_EDGE('',*,*,#1776,.T.); +#3892 = ORIENTED_EDGE('',*,*,#1752,.T.); +#3893 = ORIENTED_EDGE('',*,*,#1697,.T.); +#3894 = ORIENTED_EDGE('',*,*,#1728,.T.); +#3895 = PLANE('',#3896); +#3896 = AXIS2_PLACEMENT_3D('',#3897,#3898,#3899); +#3897 = CARTESIAN_POINT('',(2.2625,0.25,0.E+000)); +#3898 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3899 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3900 = ADVANCED_FACE('',(#3901),#3907,.F.); +#3901 = FACE_BOUND('',#3902,.F.); +#3902 = EDGE_LOOP('',(#3903,#3904,#3905,#3906)); +#3903 = ORIENTED_EDGE('',*,*,#1824,.T.); +#3904 = ORIENTED_EDGE('',*,*,#1872,.T.); +#3905 = ORIENTED_EDGE('',*,*,#1848,.T.); +#3906 = ORIENTED_EDGE('',*,*,#1793,.T.); +#3907 = PLANE('',#3908); +#3908 = AXIS2_PLACEMENT_3D('',#3909,#3910,#3911); +#3909 = CARTESIAN_POINT('',(2.2625,0.75,0.E+000)); +#3910 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3911 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3912 = ADVANCED_FACE('',(#3913),#3919,.F.); +#3913 = FACE_BOUND('',#3914,.F.); +#3914 = EDGE_LOOP('',(#3915,#3916,#3917,#3918)); +#3915 = ORIENTED_EDGE('',*,*,#1920,.T.); +#3916 = ORIENTED_EDGE('',*,*,#1968,.T.); +#3917 = ORIENTED_EDGE('',*,*,#1944,.T.); +#3918 = ORIENTED_EDGE('',*,*,#1889,.T.); +#3919 = PLANE('',#3920); +#3920 = AXIS2_PLACEMENT_3D('',#3921,#3922,#3923); +#3921 = CARTESIAN_POINT('',(2.25,1.5625,0.E+000)); +#3922 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3923 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#3924 = ADVANCED_FACE('',(#3925),#3931,.F.); +#3925 = FACE_BOUND('',#3926,.F.); +#3926 = EDGE_LOOP('',(#3927,#3928,#3929,#3930)); +#3927 = ORIENTED_EDGE('',*,*,#2040,.T.); +#3928 = ORIENTED_EDGE('',*,*,#1985,.T.); +#3929 = ORIENTED_EDGE('',*,*,#2016,.T.); +#3930 = ORIENTED_EDGE('',*,*,#2064,.T.); +#3931 = PLANE('',#3932); +#3932 = AXIS2_PLACEMENT_3D('',#3933,#3934,#3935); +#3933 = CARTESIAN_POINT('',(1.75,1.5625,0.E+000)); +#3934 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3935 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#3936 = ADVANCED_FACE('',(#3937),#3943,.F.); +#3937 = FACE_BOUND('',#3938,.F.); +#3938 = EDGE_LOOP('',(#3939,#3940,#3941,#3942)); +#3939 = ORIENTED_EDGE('',*,*,#2112,.T.); +#3940 = ORIENTED_EDGE('',*,*,#2160,.T.); +#3941 = ORIENTED_EDGE('',*,*,#2136,.T.); +#3942 = ORIENTED_EDGE('',*,*,#2081,.T.); +#3943 = PLANE('',#3944); +#3944 = AXIS2_PLACEMENT_3D('',#3945,#3946,#3947); +#3945 = CARTESIAN_POINT('',(1.25,1.5625,0.E+000)); +#3946 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3947 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#3948 = ADVANCED_FACE('',(#3949),#3955,.F.); +#3949 = FACE_BOUND('',#3950,.F.); +#3950 = EDGE_LOOP('',(#3951,#3952,#3953,#3954)); +#3951 = ORIENTED_EDGE('',*,*,#2177,.T.); +#3952 = ORIENTED_EDGE('',*,*,#2208,.T.); +#3953 = ORIENTED_EDGE('',*,*,#2256,.T.); +#3954 = ORIENTED_EDGE('',*,*,#2232,.T.); +#3955 = PLANE('',#3956); +#3956 = AXIS2_PLACEMENT_3D('',#3957,#3958,#3959); +#3957 = CARTESIAN_POINT('',(2.2625,-0.25,0.E+000)); +#3958 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3959 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3960 = ADVANCED_FACE('',(#3961),#3967,.F.); +#3961 = FACE_BOUND('',#3962,.F.); +#3962 = EDGE_LOOP('',(#3963,#3964,#3965,#3966)); +#3963 = ORIENTED_EDGE('',*,*,#2304,.T.); +#3964 = ORIENTED_EDGE('',*,*,#2352,.T.); +#3965 = ORIENTED_EDGE('',*,*,#2328,.T.); +#3966 = ORIENTED_EDGE('',*,*,#2273,.T.); +#3967 = PLANE('',#3968); +#3968 = AXIS2_PLACEMENT_3D('',#3969,#3970,#3971); +#3969 = CARTESIAN_POINT('',(2.2625,-0.75,0.E+000)); +#3970 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3971 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#3972 = ADVANCED_FACE('',(#3973),#3979,.F.); +#3973 = FACE_BOUND('',#3974,.F.); +#3974 = EDGE_LOOP('',(#3975,#3976,#3977,#3978)); +#3975 = ORIENTED_EDGE('',*,*,#2400,.T.); +#3976 = ORIENTED_EDGE('',*,*,#2448,.T.); +#3977 = ORIENTED_EDGE('',*,*,#2424,.T.); +#3978 = ORIENTED_EDGE('',*,*,#2369,.T.); +#3979 = PLANE('',#3980); +#3980 = AXIS2_PLACEMENT_3D('',#3981,#3982,#3983); +#3981 = CARTESIAN_POINT('',(-2.2625,-0.75,0.E+000)); +#3982 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3983 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3984 = ADVANCED_FACE('',(#3985),#3991,.F.); +#3985 = FACE_BOUND('',#3986,.F.); +#3986 = EDGE_LOOP('',(#3987,#3988,#3989,#3990)); +#3987 = ORIENTED_EDGE('',*,*,#2544,.T.); +#3988 = ORIENTED_EDGE('',*,*,#2520,.T.); +#3989 = ORIENTED_EDGE('',*,*,#2465,.T.); +#3990 = ORIENTED_EDGE('',*,*,#2496,.T.); +#3991 = PLANE('',#3992); +#3992 = AXIS2_PLACEMENT_3D('',#3993,#3994,#3995); +#3993 = CARTESIAN_POINT('',(-2.2625,0.25,0.E+000)); +#3994 = DIRECTION('',(0.E+000,0.E+000,1.)); +#3995 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#3996 = ADVANCED_FACE('',(#3997),#4003,.F.); +#3997 = FACE_BOUND('',#3998,.F.); +#3998 = EDGE_LOOP('',(#3999,#4000,#4001,#4002)); +#3999 = ORIENTED_EDGE('',*,*,#2616,.T.); +#4000 = ORIENTED_EDGE('',*,*,#2561,.T.); +#4001 = ORIENTED_EDGE('',*,*,#2592,.T.); +#4002 = ORIENTED_EDGE('',*,*,#2640,.T.); +#4003 = PLANE('',#4004); +#4004 = AXIS2_PLACEMENT_3D('',#4005,#4006,#4007); +#4005 = CARTESIAN_POINT('',(-2.2625,-0.25,0.E+000)); +#4006 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4007 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#4008 = ADVANCED_FACE('',(#4009),#4015,.F.); +#4009 = FACE_BOUND('',#4010,.F.); +#4010 = EDGE_LOOP('',(#4011,#4012,#4013,#4014)); +#4011 = ORIENTED_EDGE('',*,*,#2736,.T.); +#4012 = ORIENTED_EDGE('',*,*,#2712,.T.); +#4013 = ORIENTED_EDGE('',*,*,#2657,.T.); +#4014 = ORIENTED_EDGE('',*,*,#2688,.T.); +#4015 = PLANE('',#4016); +#4016 = AXIS2_PLACEMENT_3D('',#4017,#4018,#4019); +#4017 = CARTESIAN_POINT('',(-2.2625,0.75,0.E+000)); +#4018 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4019 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#4020 = ADVANCED_FACE('',(#4021),#4027,.F.); +#4021 = FACE_BOUND('',#4022,.F.); +#4022 = EDGE_LOOP('',(#4023,#4024,#4025,#4026)); +#4023 = ORIENTED_EDGE('',*,*,#2784,.T.); +#4024 = ORIENTED_EDGE('',*,*,#2832,.T.); +#4025 = ORIENTED_EDGE('',*,*,#2808,.T.); +#4026 = ORIENTED_EDGE('',*,*,#2753,.T.); +#4027 = PLANE('',#4028); +#4028 = AXIS2_PLACEMENT_3D('',#4029,#4030,#4031); +#4029 = CARTESIAN_POINT('',(-1.75,1.5625,0.E+000)); +#4030 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4031 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000)); +#4032 = ADVANCED_FACE('',(#4033),#4039,.F.); +#4033 = FACE_BOUND('',#4034,.F.); +#4034 = EDGE_LOOP('',(#4035,#4036,#4037,#4038)); +#4035 = ORIENTED_EDGE('',*,*,#2880,.T.); +#4036 = ORIENTED_EDGE('',*,*,#2928,.T.); +#4037 = ORIENTED_EDGE('',*,*,#2904,.T.); +#4038 = ORIENTED_EDGE('',*,*,#2849,.T.); +#4039 = PLANE('',#4040); +#4040 = AXIS2_PLACEMENT_3D('',#4041,#4042,#4043); +#4041 = CARTESIAN_POINT('',(-1.75,-1.5625,0.E+000)); +#4042 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4043 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#4044 = ADVANCED_FACE('',(#4045),#4051,.F.); +#4045 = FACE_BOUND('',#4046,.F.); +#4046 = EDGE_LOOP('',(#4047,#4048,#4049,#4050)); +#4047 = ORIENTED_EDGE('',*,*,#2945,.T.); +#4048 = ORIENTED_EDGE('',*,*,#2976,.T.); +#4049 = ORIENTED_EDGE('',*,*,#3024,.T.); +#4050 = ORIENTED_EDGE('',*,*,#3000,.T.); +#4051 = PLANE('',#4052); +#4052 = AXIS2_PLACEMENT_3D('',#4053,#4054,#4055); +#4053 = CARTESIAN_POINT('',(-1.25,-1.5625,0.E+000)); +#4054 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4055 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#4056 = ADVANCED_FACE('',(#4057),#4063,.F.); +#4057 = FACE_BOUND('',#4058,.F.); +#4058 = EDGE_LOOP('',(#4059,#4060,#4061,#4062)); +#4059 = ORIENTED_EDGE('',*,*,#3041,.T.); +#4060 = ORIENTED_EDGE('',*,*,#3072,.T.); +#4061 = ORIENTED_EDGE('',*,*,#3120,.T.); +#4062 = ORIENTED_EDGE('',*,*,#3096,.T.); +#4063 = PLANE('',#4064); +#4064 = AXIS2_PLACEMENT_3D('',#4065,#4066,#4067); +#4065 = CARTESIAN_POINT('',(-0.75,-1.5625,0.E+000)); +#4066 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4067 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#4068 = ADVANCED_FACE('',(#4069),#4075,.F.); +#4069 = FACE_BOUND('',#4070,.F.); +#4070 = EDGE_LOOP('',(#4071,#4072,#4073,#4074)); +#4071 = ORIENTED_EDGE('',*,*,#3216,.T.); +#4072 = ORIENTED_EDGE('',*,*,#3192,.T.); +#4073 = ORIENTED_EDGE('',*,*,#3137,.T.); +#4074 = ORIENTED_EDGE('',*,*,#3168,.T.); +#4075 = PLANE('',#4076); +#4076 = AXIS2_PLACEMENT_3D('',#4077,#4078,#4079); +#4077 = CARTESIAN_POINT('',(-0.25,-1.5625,0.E+000)); +#4078 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4079 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#4080 = ADVANCED_FACE('',(#4081),#4087,.F.); +#4081 = FACE_BOUND('',#4082,.F.); +#4082 = EDGE_LOOP('',(#4083,#4084,#4085,#4086)); +#4083 = ORIENTED_EDGE('',*,*,#3288,.T.); +#4084 = ORIENTED_EDGE('',*,*,#3233,.T.); +#4085 = ORIENTED_EDGE('',*,*,#3264,.T.); +#4086 = ORIENTED_EDGE('',*,*,#3312,.T.); +#4087 = PLANE('',#4088); +#4088 = AXIS2_PLACEMENT_3D('',#4089,#4090,#4091); +#4089 = CARTESIAN_POINT('',(1.25,-1.5625,0.E+000)); +#4090 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4091 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#4092 = ADVANCED_FACE('',(#4093),#4099,.F.); +#4093 = FACE_BOUND('',#4094,.F.); +#4094 = EDGE_LOOP('',(#4095,#4096,#4097,#4098)); +#4095 = ORIENTED_EDGE('',*,*,#3329,.T.); +#4096 = ORIENTED_EDGE('',*,*,#3360,.T.); +#4097 = ORIENTED_EDGE('',*,*,#3408,.T.); +#4098 = ORIENTED_EDGE('',*,*,#3384,.T.); +#4099 = PLANE('',#4100); +#4100 = AXIS2_PLACEMENT_3D('',#4101,#4102,#4103); +#4101 = CARTESIAN_POINT('',(0.75,-1.5625,0.E+000)); +#4102 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4103 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#4104 = ADVANCED_FACE('',(#4105),#4111,.F.); +#4105 = FACE_BOUND('',#4106,.F.); +#4106 = EDGE_LOOP('',(#4107,#4108,#4109,#4110)); +#4107 = ORIENTED_EDGE('',*,*,#3480,.T.); +#4108 = ORIENTED_EDGE('',*,*,#3425,.T.); +#4109 = ORIENTED_EDGE('',*,*,#3456,.T.); +#4110 = ORIENTED_EDGE('',*,*,#3504,.T.); +#4111 = PLANE('',#4112); +#4112 = AXIS2_PLACEMENT_3D('',#4113,#4114,#4115); +#4113 = CARTESIAN_POINT('',(0.25,-1.5625,0.E+000)); +#4114 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4115 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#4116 = ADVANCED_FACE('',(#4117),#4123,.F.); +#4117 = FACE_BOUND('',#4118,.F.); +#4118 = EDGE_LOOP('',(#4119,#4120,#4121,#4122)); +#4119 = ORIENTED_EDGE('',*,*,#3552,.T.); +#4120 = ORIENTED_EDGE('',*,*,#3600,.T.); +#4121 = ORIENTED_EDGE('',*,*,#3576,.T.); +#4122 = ORIENTED_EDGE('',*,*,#3521,.T.); +#4123 = PLANE('',#4124); +#4124 = AXIS2_PLACEMENT_3D('',#4125,#4126,#4127); +#4125 = CARTESIAN_POINT('',(2.25,-1.5625,0.E+000)); +#4126 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4127 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#4128 = ADVANCED_FACE('',(#4129),#4135,.F.); +#4129 = FACE_BOUND('',#4130,.F.); +#4130 = EDGE_LOOP('',(#4131,#4132,#4133,#4134)); +#4131 = ORIENTED_EDGE('',*,*,#3617,.T.); +#4132 = ORIENTED_EDGE('',*,*,#3648,.T.); +#4133 = ORIENTED_EDGE('',*,*,#3696,.T.); +#4134 = ORIENTED_EDGE('',*,*,#3672,.T.); +#4135 = PLANE('',#4136); +#4136 = AXIS2_PLACEMENT_3D('',#4137,#4138,#4139); +#4137 = CARTESIAN_POINT('',(1.75,-1.5625,0.E+000)); +#4138 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4139 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#4140 = ADVANCED_FACE('',(#4141),#4147,.F.); +#4141 = FACE_BOUND('',#4142,.F.); +#4142 = EDGE_LOOP('',(#4143,#4144,#4145,#4146)); +#4143 = ORIENTED_EDGE('',*,*,#3744,.T.); +#4144 = ORIENTED_EDGE('',*,*,#3792,.T.); +#4145 = ORIENTED_EDGE('',*,*,#3768,.T.); +#4146 = ORIENTED_EDGE('',*,*,#3713,.T.); +#4147 = PLANE('',#4148); +#4148 = AXIS2_PLACEMENT_3D('',#4149,#4150,#4151); +#4149 = CARTESIAN_POINT('',(-2.25,-1.5625,0.E+000)); +#4150 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4151 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000)); +#4152 = ADVANCED_FACE('',(#4153),#4172,.F.); +#4153 = FACE_BOUND('',#4154,.T.); +#4154 = EDGE_LOOP('',(#4155,#4156,#4164,#4171)); +#4155 = ORIENTED_EDGE('',*,*,#3815,.F.); +#4156 = ORIENTED_EDGE('',*,*,#4157,.T.); +#4157 = EDGE_CURVE('',#3816,#4158,#4160,.T.); +#4158 = VERTEX_POINT('',#4159); +#4159 = CARTESIAN_POINT('',(-2.15,1.275,1.005)); +#4160 = LINE('',#4161,#4162); +#4161 = CARTESIAN_POINT('',(-2.15,1.275,1.045)); +#4162 = VECTOR('',#4163,1.); +#4163 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#4164 = ORIENTED_EDGE('',*,*,#4165,.F.); +#4165 = EDGE_CURVE('',#4158,#4158,#4166,.T.); +#4166 = CIRCLE('',#4167,0.175); +#4167 = AXIS2_PLACEMENT_3D('',#4168,#4169,#4170); +#4168 = CARTESIAN_POINT('',(-2.15,1.45,1.005)); +#4169 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4170 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#4171 = ORIENTED_EDGE('',*,*,#4157,.F.); +#4172 = CYLINDRICAL_SURFACE('',#4173,0.175); +#4173 = AXIS2_PLACEMENT_3D('',#4174,#4175,#4176); +#4174 = CARTESIAN_POINT('',(-2.15,1.45,1.045)); +#4175 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#4176 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#4177 = ADVANCED_FACE('',(#4178),#4181,.T.); +#4178 = FACE_BOUND('',#4179,.T.); +#4179 = EDGE_LOOP('',(#4180)); +#4180 = ORIENTED_EDGE('',*,*,#4165,.T.); +#4181 = PLANE('',#4182); +#4182 = AXIS2_PLACEMENT_3D('',#4183,#4184,#4185); +#4183 = CARTESIAN_POINT('',(-2.15,1.45,1.005)); +#4184 = DIRECTION('',(0.E+000,0.E+000,1.)); +#4185 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#4186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#4190)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#4187,#4188,#4189)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#4187 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#4188 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#4189 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#4190 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-007),#4187, +'distance_accuracy_value','confusion accuracy'); +#4191 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +#4192 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( +#4193,#4201,#4208,#4215,#4222,#4229,#4237,#4244,#4251,#4258,#4265, +#4272,#4279,#4286,#4293,#4300,#4307,#4314,#4321,#4328,#4335,#4342, +#4349,#4356,#4363,#4370,#4377,#4384,#4391,#4398,#4405,#4412,#4419, +#4426,#4433,#4440,#4447,#4454,#4461,#4468,#4475,#4482,#4489,#4496, +#4503,#4510,#4517,#4524,#4531,#4538,#4545,#4552,#4559,#4566,#4573, +#4580,#4587,#4594,#4601,#4608,#4615,#4622,#4629,#4636,#4643,#4650, +#4657,#4664,#4671,#4678,#4685,#4692,#4699,#4706,#4713,#4720,#4727, +#4734,#4741,#4748,#4755,#4762,#4769,#4776,#4783,#4790,#4797,#4804, +#4811,#4818,#4825,#4832,#4839,#4846,#4853,#4860,#4867,#4874,#4881, +#4888,#4895,#4902,#4909,#4916,#4923,#4930,#4937,#4944,#4951,#4958, +#4965,#4972,#4979,#4986,#4993,#5000,#5007,#5014,#5021,#5028,#5035, +#5042,#5049,#5056,#5063,#5070,#5077,#5084,#5091,#5098,#5105,#5112, +#5119,#5126,#5133,#5140,#5147,#5154,#5161,#5168,#5175,#5182,#5189, +#5196,#5203,#5210,#5217,#5225),#4186); +#4193 = STYLED_ITEM('color',(#4194),#17); +#4194 = PRESENTATION_STYLE_ASSIGNMENT((#4195)); +#4195 = SURFACE_STYLE_USAGE(.BOTH.,#4196); +#4196 = SURFACE_SIDE_STYLE('',(#4197)); +#4197 = SURFACE_STYLE_FILL_AREA(#4198); +#4198 = FILL_AREA_STYLE('',(#4199)); +#4199 = FILL_AREA_STYLE_COLOUR('',#4200); +#4200 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812); +#4201 = STYLED_ITEM('color',(#4202),#57); +#4202 = PRESENTATION_STYLE_ASSIGNMENT((#4203)); +#4203 = SURFACE_STYLE_USAGE(.BOTH.,#4204); +#4204 = SURFACE_SIDE_STYLE('',(#4205)); +#4205 = SURFACE_STYLE_FILL_AREA(#4206); +#4206 = FILL_AREA_STYLE('',(#4207)); +#4207 = FILL_AREA_STYLE_COLOUR('',#4200); +#4208 = STYLED_ITEM('color',(#4209),#88); +#4209 = PRESENTATION_STYLE_ASSIGNMENT((#4210)); +#4210 = SURFACE_STYLE_USAGE(.BOTH.,#4211); +#4211 = SURFACE_SIDE_STYLE('',(#4212)); +#4212 = SURFACE_STYLE_FILL_AREA(#4213); +#4213 = FILL_AREA_STYLE('',(#4214)); +#4214 = FILL_AREA_STYLE_COLOUR('',#4200); +#4215 = STYLED_ITEM('color',(#4216),#112); +#4216 = PRESENTATION_STYLE_ASSIGNMENT((#4217)); +#4217 = SURFACE_STYLE_USAGE(.BOTH.,#4218); +#4218 = SURFACE_SIDE_STYLE('',(#4219)); +#4219 = SURFACE_STYLE_FILL_AREA(#4220); +#4220 = FILL_AREA_STYLE('',(#4221)); +#4221 = FILL_AREA_STYLE_COLOUR('',#4200); +#4222 = STYLED_ITEM('color',(#4223),#136); +#4223 = PRESENTATION_STYLE_ASSIGNMENT((#4224)); +#4224 = SURFACE_STYLE_USAGE(.BOTH.,#4225); +#4225 = SURFACE_SIDE_STYLE('',(#4226)); +#4226 = SURFACE_STYLE_FILL_AREA(#4227); +#4227 = FILL_AREA_STYLE('',(#4228)); +#4228 = FILL_AREA_STYLE_COLOUR('',#4200); +#4229 = STYLED_ITEM('color',(#4230),#153); +#4230 = PRESENTATION_STYLE_ASSIGNMENT((#4231)); +#4231 = SURFACE_STYLE_USAGE(.BOTH.,#4232); +#4232 = SURFACE_SIDE_STYLE('',(#4233)); +#4233 = SURFACE_STYLE_FILL_AREA(#4234); +#4234 = FILL_AREA_STYLE('',(#4235)); +#4235 = FILL_AREA_STYLE_COLOUR('',#4236); +#4236 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828); +#4237 = STYLED_ITEM('color',(#4238),#1117); +#4238 = PRESENTATION_STYLE_ASSIGNMENT((#4239)); +#4239 = SURFACE_STYLE_USAGE(.BOTH.,#4240); +#4240 = SURFACE_SIDE_STYLE('',(#4241)); +#4241 = SURFACE_STYLE_FILL_AREA(#4242); +#4242 = FILL_AREA_STYLE('',(#4243)); +#4243 = FILL_AREA_STYLE_COLOUR('',#4236); +#4244 = STYLED_ITEM('color',(#4245),#1148); +#4245 = PRESENTATION_STYLE_ASSIGNMENT((#4246)); +#4246 = SURFACE_STYLE_USAGE(.BOTH.,#4247); +#4247 = SURFACE_SIDE_STYLE('',(#4248)); +#4248 = SURFACE_STYLE_FILL_AREA(#4249); +#4249 = FILL_AREA_STYLE('',(#4250)); +#4250 = FILL_AREA_STYLE_COLOUR('',#4236); +#4251 = STYLED_ITEM('color',(#4252),#1172); +#4252 = PRESENTATION_STYLE_ASSIGNMENT((#4253)); +#4253 = SURFACE_STYLE_USAGE(.BOTH.,#4254); +#4254 = SURFACE_SIDE_STYLE('',(#4255)); +#4255 = SURFACE_STYLE_FILL_AREA(#4256); +#4256 = FILL_AREA_STYLE('',(#4257)); +#4257 = FILL_AREA_STYLE_COLOUR('',#4236); +#4258 = STYLED_ITEM('color',(#4259),#1196); +#4259 = PRESENTATION_STYLE_ASSIGNMENT((#4260)); +#4260 = SURFACE_STYLE_USAGE(.BOTH.,#4261); +#4261 = SURFACE_SIDE_STYLE('',(#4262)); +#4262 = SURFACE_STYLE_FILL_AREA(#4263); +#4263 = FILL_AREA_STYLE('',(#4264)); +#4264 = FILL_AREA_STYLE_COLOUR('',#4236); +#4265 = STYLED_ITEM('color',(#4266),#1213); +#4266 = PRESENTATION_STYLE_ASSIGNMENT((#4267)); +#4267 = SURFACE_STYLE_USAGE(.BOTH.,#4268); +#4268 = SURFACE_SIDE_STYLE('',(#4269)); +#4269 = SURFACE_STYLE_FILL_AREA(#4270); +#4270 = FILL_AREA_STYLE('',(#4271)); +#4271 = FILL_AREA_STYLE_COLOUR('',#4200); +#4272 = STYLED_ITEM('color',(#4273),#1244); +#4273 = PRESENTATION_STYLE_ASSIGNMENT((#4274)); +#4274 = SURFACE_STYLE_USAGE(.BOTH.,#4275); +#4275 = SURFACE_SIDE_STYLE('',(#4276)); +#4276 = SURFACE_STYLE_FILL_AREA(#4277); +#4277 = FILL_AREA_STYLE('',(#4278)); +#4278 = FILL_AREA_STYLE_COLOUR('',#4200); +#4279 = STYLED_ITEM('color',(#4280),#1268); +#4280 = PRESENTATION_STYLE_ASSIGNMENT((#4281)); +#4281 = SURFACE_STYLE_USAGE(.BOTH.,#4282); +#4282 = SURFACE_SIDE_STYLE('',(#4283)); +#4283 = SURFACE_STYLE_FILL_AREA(#4284); +#4284 = FILL_AREA_STYLE('',(#4285)); +#4285 = FILL_AREA_STYLE_COLOUR('',#4200); +#4286 = STYLED_ITEM('color',(#4287),#1292); +#4287 = PRESENTATION_STYLE_ASSIGNMENT((#4288)); +#4288 = SURFACE_STYLE_USAGE(.BOTH.,#4289); +#4289 = SURFACE_SIDE_STYLE('',(#4290)); +#4290 = SURFACE_STYLE_FILL_AREA(#4291); +#4291 = FILL_AREA_STYLE('',(#4292)); +#4292 = FILL_AREA_STYLE_COLOUR('',#4200); +#4293 = STYLED_ITEM('color',(#4294),#1309); +#4294 = PRESENTATION_STYLE_ASSIGNMENT((#4295)); +#4295 = SURFACE_STYLE_USAGE(.BOTH.,#4296); +#4296 = SURFACE_SIDE_STYLE('',(#4297)); +#4297 = SURFACE_STYLE_FILL_AREA(#4298); +#4298 = FILL_AREA_STYLE('',(#4299)); +#4299 = FILL_AREA_STYLE_COLOUR('',#4200); +#4300 = STYLED_ITEM('color',(#4301),#1340); +#4301 = PRESENTATION_STYLE_ASSIGNMENT((#4302)); +#4302 = SURFACE_STYLE_USAGE(.BOTH.,#4303); +#4303 = SURFACE_SIDE_STYLE('',(#4304)); +#4304 = SURFACE_STYLE_FILL_AREA(#4305); +#4305 = FILL_AREA_STYLE('',(#4306)); +#4306 = FILL_AREA_STYLE_COLOUR('',#4200); +#4307 = STYLED_ITEM('color',(#4308),#1364); +#4308 = PRESENTATION_STYLE_ASSIGNMENT((#4309)); +#4309 = SURFACE_STYLE_USAGE(.BOTH.,#4310); +#4310 = SURFACE_SIDE_STYLE('',(#4311)); +#4311 = SURFACE_STYLE_FILL_AREA(#4312); +#4312 = FILL_AREA_STYLE('',(#4313)); +#4313 = FILL_AREA_STYLE_COLOUR('',#4200); +#4314 = STYLED_ITEM('color',(#4315),#1388); +#4315 = PRESENTATION_STYLE_ASSIGNMENT((#4316)); +#4316 = SURFACE_STYLE_USAGE(.BOTH.,#4317); +#4317 = SURFACE_SIDE_STYLE('',(#4318)); +#4318 = SURFACE_STYLE_FILL_AREA(#4319); +#4319 = FILL_AREA_STYLE('',(#4320)); +#4320 = FILL_AREA_STYLE_COLOUR('',#4200); +#4321 = STYLED_ITEM('color',(#4322),#1405); +#4322 = PRESENTATION_STYLE_ASSIGNMENT((#4323)); +#4323 = SURFACE_STYLE_USAGE(.BOTH.,#4324); +#4324 = SURFACE_SIDE_STYLE('',(#4325)); +#4325 = SURFACE_STYLE_FILL_AREA(#4326); +#4326 = FILL_AREA_STYLE('',(#4327)); +#4327 = FILL_AREA_STYLE_COLOUR('',#4200); +#4328 = STYLED_ITEM('color',(#4329),#1436); +#4329 = PRESENTATION_STYLE_ASSIGNMENT((#4330)); +#4330 = SURFACE_STYLE_USAGE(.BOTH.,#4331); +#4331 = SURFACE_SIDE_STYLE('',(#4332)); +#4332 = SURFACE_STYLE_FILL_AREA(#4333); +#4333 = FILL_AREA_STYLE('',(#4334)); +#4334 = FILL_AREA_STYLE_COLOUR('',#4200); +#4335 = STYLED_ITEM('color',(#4336),#1460); +#4336 = PRESENTATION_STYLE_ASSIGNMENT((#4337)); +#4337 = SURFACE_STYLE_USAGE(.BOTH.,#4338); +#4338 = SURFACE_SIDE_STYLE('',(#4339)); +#4339 = SURFACE_STYLE_FILL_AREA(#4340); +#4340 = FILL_AREA_STYLE('',(#4341)); +#4341 = FILL_AREA_STYLE_COLOUR('',#4200); +#4342 = STYLED_ITEM('color',(#4343),#1484); +#4343 = PRESENTATION_STYLE_ASSIGNMENT((#4344)); +#4344 = SURFACE_STYLE_USAGE(.BOTH.,#4345); +#4345 = SURFACE_SIDE_STYLE('',(#4346)); +#4346 = SURFACE_STYLE_FILL_AREA(#4347); +#4347 = FILL_AREA_STYLE('',(#4348)); +#4348 = FILL_AREA_STYLE_COLOUR('',#4200); +#4349 = STYLED_ITEM('color',(#4350),#1501); +#4350 = PRESENTATION_STYLE_ASSIGNMENT((#4351)); +#4351 = SURFACE_STYLE_USAGE(.BOTH.,#4352); +#4352 = SURFACE_SIDE_STYLE('',(#4353)); +#4353 = SURFACE_STYLE_FILL_AREA(#4354); +#4354 = FILL_AREA_STYLE('',(#4355)); +#4355 = FILL_AREA_STYLE_COLOUR('',#4200); +#4356 = STYLED_ITEM('color',(#4357),#1532); +#4357 = PRESENTATION_STYLE_ASSIGNMENT((#4358)); +#4358 = SURFACE_STYLE_USAGE(.BOTH.,#4359); +#4359 = SURFACE_SIDE_STYLE('',(#4360)); +#4360 = SURFACE_STYLE_FILL_AREA(#4361); +#4361 = FILL_AREA_STYLE('',(#4362)); +#4362 = FILL_AREA_STYLE_COLOUR('',#4200); +#4363 = STYLED_ITEM('color',(#4364),#1556); +#4364 = PRESENTATION_STYLE_ASSIGNMENT((#4365)); +#4365 = SURFACE_STYLE_USAGE(.BOTH.,#4366); +#4366 = SURFACE_SIDE_STYLE('',(#4367)); +#4367 = SURFACE_STYLE_FILL_AREA(#4368); +#4368 = FILL_AREA_STYLE('',(#4369)); +#4369 = FILL_AREA_STYLE_COLOUR('',#4200); +#4370 = STYLED_ITEM('color',(#4371),#1580); +#4371 = PRESENTATION_STYLE_ASSIGNMENT((#4372)); +#4372 = SURFACE_STYLE_USAGE(.BOTH.,#4373); +#4373 = SURFACE_SIDE_STYLE('',(#4374)); +#4374 = SURFACE_STYLE_FILL_AREA(#4375); +#4375 = FILL_AREA_STYLE('',(#4376)); +#4376 = FILL_AREA_STYLE_COLOUR('',#4200); +#4377 = STYLED_ITEM('color',(#4378),#1597); +#4378 = PRESENTATION_STYLE_ASSIGNMENT((#4379)); +#4379 = SURFACE_STYLE_USAGE(.BOTH.,#4380); +#4380 = SURFACE_SIDE_STYLE('',(#4381)); +#4381 = SURFACE_STYLE_FILL_AREA(#4382); +#4382 = FILL_AREA_STYLE('',(#4383)); +#4383 = FILL_AREA_STYLE_COLOUR('',#4200); +#4384 = STYLED_ITEM('color',(#4385),#1628); +#4385 = PRESENTATION_STYLE_ASSIGNMENT((#4386)); +#4386 = SURFACE_STYLE_USAGE(.BOTH.,#4387); +#4387 = SURFACE_SIDE_STYLE('',(#4388)); +#4388 = SURFACE_STYLE_FILL_AREA(#4389); +#4389 = FILL_AREA_STYLE('',(#4390)); +#4390 = FILL_AREA_STYLE_COLOUR('',#4200); +#4391 = STYLED_ITEM('color',(#4392),#1652); +#4392 = PRESENTATION_STYLE_ASSIGNMENT((#4393)); +#4393 = SURFACE_STYLE_USAGE(.BOTH.,#4394); +#4394 = SURFACE_SIDE_STYLE('',(#4395)); +#4395 = SURFACE_STYLE_FILL_AREA(#4396); +#4396 = FILL_AREA_STYLE('',(#4397)); +#4397 = FILL_AREA_STYLE_COLOUR('',#4200); +#4398 = STYLED_ITEM('color',(#4399),#1676); +#4399 = PRESENTATION_STYLE_ASSIGNMENT((#4400)); +#4400 = SURFACE_STYLE_USAGE(.BOTH.,#4401); +#4401 = SURFACE_SIDE_STYLE('',(#4402)); +#4402 = SURFACE_STYLE_FILL_AREA(#4403); +#4403 = FILL_AREA_STYLE('',(#4404)); +#4404 = FILL_AREA_STYLE_COLOUR('',#4200); +#4405 = STYLED_ITEM('color',(#4406),#1693); +#4406 = PRESENTATION_STYLE_ASSIGNMENT((#4407)); +#4407 = SURFACE_STYLE_USAGE(.BOTH.,#4408); +#4408 = SURFACE_SIDE_STYLE('',(#4409)); +#4409 = SURFACE_STYLE_FILL_AREA(#4410); +#4410 = FILL_AREA_STYLE('',(#4411)); +#4411 = FILL_AREA_STYLE_COLOUR('',#4200); +#4412 = STYLED_ITEM('color',(#4413),#1724); +#4413 = PRESENTATION_STYLE_ASSIGNMENT((#4414)); +#4414 = SURFACE_STYLE_USAGE(.BOTH.,#4415); +#4415 = SURFACE_SIDE_STYLE('',(#4416)); +#4416 = SURFACE_STYLE_FILL_AREA(#4417); +#4417 = FILL_AREA_STYLE('',(#4418)); +#4418 = FILL_AREA_STYLE_COLOUR('',#4200); +#4419 = STYLED_ITEM('color',(#4420),#1748); +#4420 = PRESENTATION_STYLE_ASSIGNMENT((#4421)); +#4421 = SURFACE_STYLE_USAGE(.BOTH.,#4422); +#4422 = SURFACE_SIDE_STYLE('',(#4423)); +#4423 = SURFACE_STYLE_FILL_AREA(#4424); +#4424 = FILL_AREA_STYLE('',(#4425)); +#4425 = FILL_AREA_STYLE_COLOUR('',#4200); +#4426 = STYLED_ITEM('color',(#4427),#1772); +#4427 = PRESENTATION_STYLE_ASSIGNMENT((#4428)); +#4428 = SURFACE_STYLE_USAGE(.BOTH.,#4429); +#4429 = SURFACE_SIDE_STYLE('',(#4430)); +#4430 = SURFACE_STYLE_FILL_AREA(#4431); +#4431 = FILL_AREA_STYLE('',(#4432)); +#4432 = FILL_AREA_STYLE_COLOUR('',#4200); +#4433 = STYLED_ITEM('color',(#4434),#1789); +#4434 = PRESENTATION_STYLE_ASSIGNMENT((#4435)); +#4435 = SURFACE_STYLE_USAGE(.BOTH.,#4436); +#4436 = SURFACE_SIDE_STYLE('',(#4437)); +#4437 = SURFACE_STYLE_FILL_AREA(#4438); +#4438 = FILL_AREA_STYLE('',(#4439)); +#4439 = FILL_AREA_STYLE_COLOUR('',#4200); +#4440 = STYLED_ITEM('color',(#4441),#1820); +#4441 = PRESENTATION_STYLE_ASSIGNMENT((#4442)); +#4442 = SURFACE_STYLE_USAGE(.BOTH.,#4443); +#4443 = SURFACE_SIDE_STYLE('',(#4444)); +#4444 = SURFACE_STYLE_FILL_AREA(#4445); +#4445 = FILL_AREA_STYLE('',(#4446)); +#4446 = FILL_AREA_STYLE_COLOUR('',#4200); +#4447 = STYLED_ITEM('color',(#4448),#1844); +#4448 = PRESENTATION_STYLE_ASSIGNMENT((#4449)); +#4449 = SURFACE_STYLE_USAGE(.BOTH.,#4450); +#4450 = SURFACE_SIDE_STYLE('',(#4451)); +#4451 = SURFACE_STYLE_FILL_AREA(#4452); +#4452 = FILL_AREA_STYLE('',(#4453)); +#4453 = FILL_AREA_STYLE_COLOUR('',#4200); +#4454 = STYLED_ITEM('color',(#4455),#1868); +#4455 = PRESENTATION_STYLE_ASSIGNMENT((#4456)); +#4456 = SURFACE_STYLE_USAGE(.BOTH.,#4457); +#4457 = SURFACE_SIDE_STYLE('',(#4458)); +#4458 = SURFACE_STYLE_FILL_AREA(#4459); +#4459 = FILL_AREA_STYLE('',(#4460)); +#4460 = FILL_AREA_STYLE_COLOUR('',#4200); +#4461 = STYLED_ITEM('color',(#4462),#1885); +#4462 = PRESENTATION_STYLE_ASSIGNMENT((#4463)); +#4463 = SURFACE_STYLE_USAGE(.BOTH.,#4464); +#4464 = SURFACE_SIDE_STYLE('',(#4465)); +#4465 = SURFACE_STYLE_FILL_AREA(#4466); +#4466 = FILL_AREA_STYLE('',(#4467)); +#4467 = FILL_AREA_STYLE_COLOUR('',#4200); +#4468 = STYLED_ITEM('color',(#4469),#1916); +#4469 = PRESENTATION_STYLE_ASSIGNMENT((#4470)); +#4470 = SURFACE_STYLE_USAGE(.BOTH.,#4471); +#4471 = SURFACE_SIDE_STYLE('',(#4472)); +#4472 = SURFACE_STYLE_FILL_AREA(#4473); +#4473 = FILL_AREA_STYLE('',(#4474)); +#4474 = FILL_AREA_STYLE_COLOUR('',#4200); +#4475 = STYLED_ITEM('color',(#4476),#1940); +#4476 = PRESENTATION_STYLE_ASSIGNMENT((#4477)); +#4477 = SURFACE_STYLE_USAGE(.BOTH.,#4478); +#4478 = SURFACE_SIDE_STYLE('',(#4479)); +#4479 = SURFACE_STYLE_FILL_AREA(#4480); +#4480 = FILL_AREA_STYLE('',(#4481)); +#4481 = FILL_AREA_STYLE_COLOUR('',#4200); +#4482 = STYLED_ITEM('color',(#4483),#1964); +#4483 = PRESENTATION_STYLE_ASSIGNMENT((#4484)); +#4484 = SURFACE_STYLE_USAGE(.BOTH.,#4485); +#4485 = SURFACE_SIDE_STYLE('',(#4486)); +#4486 = SURFACE_STYLE_FILL_AREA(#4487); +#4487 = FILL_AREA_STYLE('',(#4488)); +#4488 = FILL_AREA_STYLE_COLOUR('',#4200); +#4489 = STYLED_ITEM('color',(#4490),#1981); +#4490 = PRESENTATION_STYLE_ASSIGNMENT((#4491)); +#4491 = SURFACE_STYLE_USAGE(.BOTH.,#4492); +#4492 = SURFACE_SIDE_STYLE('',(#4493)); +#4493 = SURFACE_STYLE_FILL_AREA(#4494); +#4494 = FILL_AREA_STYLE('',(#4495)); +#4495 = FILL_AREA_STYLE_COLOUR('',#4200); +#4496 = STYLED_ITEM('color',(#4497),#2012); +#4497 = PRESENTATION_STYLE_ASSIGNMENT((#4498)); +#4498 = SURFACE_STYLE_USAGE(.BOTH.,#4499); +#4499 = SURFACE_SIDE_STYLE('',(#4500)); +#4500 = SURFACE_STYLE_FILL_AREA(#4501); +#4501 = FILL_AREA_STYLE('',(#4502)); +#4502 = FILL_AREA_STYLE_COLOUR('',#4200); +#4503 = STYLED_ITEM('color',(#4504),#2036); +#4504 = PRESENTATION_STYLE_ASSIGNMENT((#4505)); +#4505 = SURFACE_STYLE_USAGE(.BOTH.,#4506); +#4506 = SURFACE_SIDE_STYLE('',(#4507)); +#4507 = SURFACE_STYLE_FILL_AREA(#4508); +#4508 = FILL_AREA_STYLE('',(#4509)); +#4509 = FILL_AREA_STYLE_COLOUR('',#4200); +#4510 = STYLED_ITEM('color',(#4511),#2060); +#4511 = PRESENTATION_STYLE_ASSIGNMENT((#4512)); +#4512 = SURFACE_STYLE_USAGE(.BOTH.,#4513); +#4513 = SURFACE_SIDE_STYLE('',(#4514)); +#4514 = SURFACE_STYLE_FILL_AREA(#4515); +#4515 = FILL_AREA_STYLE('',(#4516)); +#4516 = FILL_AREA_STYLE_COLOUR('',#4200); +#4517 = STYLED_ITEM('color',(#4518),#2077); +#4518 = PRESENTATION_STYLE_ASSIGNMENT((#4519)); +#4519 = SURFACE_STYLE_USAGE(.BOTH.,#4520); +#4520 = SURFACE_SIDE_STYLE('',(#4521)); +#4521 = SURFACE_STYLE_FILL_AREA(#4522); +#4522 = FILL_AREA_STYLE('',(#4523)); +#4523 = FILL_AREA_STYLE_COLOUR('',#4200); +#4524 = STYLED_ITEM('color',(#4525),#2108); +#4525 = PRESENTATION_STYLE_ASSIGNMENT((#4526)); +#4526 = SURFACE_STYLE_USAGE(.BOTH.,#4527); +#4527 = SURFACE_SIDE_STYLE('',(#4528)); +#4528 = SURFACE_STYLE_FILL_AREA(#4529); +#4529 = FILL_AREA_STYLE('',(#4530)); +#4530 = FILL_AREA_STYLE_COLOUR('',#4200); +#4531 = STYLED_ITEM('color',(#4532),#2132); +#4532 = PRESENTATION_STYLE_ASSIGNMENT((#4533)); +#4533 = SURFACE_STYLE_USAGE(.BOTH.,#4534); +#4534 = SURFACE_SIDE_STYLE('',(#4535)); +#4535 = SURFACE_STYLE_FILL_AREA(#4536); +#4536 = FILL_AREA_STYLE('',(#4537)); +#4537 = FILL_AREA_STYLE_COLOUR('',#4200); +#4538 = STYLED_ITEM('color',(#4539),#2156); +#4539 = PRESENTATION_STYLE_ASSIGNMENT((#4540)); +#4540 = SURFACE_STYLE_USAGE(.BOTH.,#4541); +#4541 = SURFACE_SIDE_STYLE('',(#4542)); +#4542 = SURFACE_STYLE_FILL_AREA(#4543); +#4543 = FILL_AREA_STYLE('',(#4544)); +#4544 = FILL_AREA_STYLE_COLOUR('',#4200); +#4545 = STYLED_ITEM('color',(#4546),#2173); +#4546 = PRESENTATION_STYLE_ASSIGNMENT((#4547)); +#4547 = SURFACE_STYLE_USAGE(.BOTH.,#4548); +#4548 = SURFACE_SIDE_STYLE('',(#4549)); +#4549 = SURFACE_STYLE_FILL_AREA(#4550); +#4550 = FILL_AREA_STYLE('',(#4551)); +#4551 = FILL_AREA_STYLE_COLOUR('',#4200); +#4552 = STYLED_ITEM('color',(#4553),#2204); +#4553 = PRESENTATION_STYLE_ASSIGNMENT((#4554)); +#4554 = SURFACE_STYLE_USAGE(.BOTH.,#4555); +#4555 = SURFACE_SIDE_STYLE('',(#4556)); +#4556 = SURFACE_STYLE_FILL_AREA(#4557); +#4557 = FILL_AREA_STYLE('',(#4558)); +#4558 = FILL_AREA_STYLE_COLOUR('',#4200); +#4559 = STYLED_ITEM('color',(#4560),#2228); +#4560 = PRESENTATION_STYLE_ASSIGNMENT((#4561)); +#4561 = SURFACE_STYLE_USAGE(.BOTH.,#4562); +#4562 = SURFACE_SIDE_STYLE('',(#4563)); +#4563 = SURFACE_STYLE_FILL_AREA(#4564); +#4564 = FILL_AREA_STYLE('',(#4565)); +#4565 = FILL_AREA_STYLE_COLOUR('',#4200); +#4566 = STYLED_ITEM('color',(#4567),#2252); +#4567 = PRESENTATION_STYLE_ASSIGNMENT((#4568)); +#4568 = SURFACE_STYLE_USAGE(.BOTH.,#4569); +#4569 = SURFACE_SIDE_STYLE('',(#4570)); +#4570 = SURFACE_STYLE_FILL_AREA(#4571); +#4571 = FILL_AREA_STYLE('',(#4572)); +#4572 = FILL_AREA_STYLE_COLOUR('',#4200); +#4573 = STYLED_ITEM('color',(#4574),#2269); +#4574 = PRESENTATION_STYLE_ASSIGNMENT((#4575)); +#4575 = SURFACE_STYLE_USAGE(.BOTH.,#4576); +#4576 = SURFACE_SIDE_STYLE('',(#4577)); +#4577 = SURFACE_STYLE_FILL_AREA(#4578); +#4578 = FILL_AREA_STYLE('',(#4579)); +#4579 = FILL_AREA_STYLE_COLOUR('',#4200); +#4580 = STYLED_ITEM('color',(#4581),#2300); +#4581 = PRESENTATION_STYLE_ASSIGNMENT((#4582)); +#4582 = SURFACE_STYLE_USAGE(.BOTH.,#4583); +#4583 = SURFACE_SIDE_STYLE('',(#4584)); +#4584 = SURFACE_STYLE_FILL_AREA(#4585); +#4585 = FILL_AREA_STYLE('',(#4586)); +#4586 = FILL_AREA_STYLE_COLOUR('',#4200); +#4587 = STYLED_ITEM('color',(#4588),#2324); +#4588 = PRESENTATION_STYLE_ASSIGNMENT((#4589)); +#4589 = SURFACE_STYLE_USAGE(.BOTH.,#4590); +#4590 = SURFACE_SIDE_STYLE('',(#4591)); +#4591 = SURFACE_STYLE_FILL_AREA(#4592); +#4592 = FILL_AREA_STYLE('',(#4593)); +#4593 = FILL_AREA_STYLE_COLOUR('',#4200); +#4594 = STYLED_ITEM('color',(#4595),#2348); +#4595 = PRESENTATION_STYLE_ASSIGNMENT((#4596)); +#4596 = SURFACE_STYLE_USAGE(.BOTH.,#4597); +#4597 = SURFACE_SIDE_STYLE('',(#4598)); +#4598 = SURFACE_STYLE_FILL_AREA(#4599); +#4599 = FILL_AREA_STYLE('',(#4600)); +#4600 = FILL_AREA_STYLE_COLOUR('',#4200); +#4601 = STYLED_ITEM('color',(#4602),#2365); +#4602 = PRESENTATION_STYLE_ASSIGNMENT((#4603)); +#4603 = SURFACE_STYLE_USAGE(.BOTH.,#4604); +#4604 = SURFACE_SIDE_STYLE('',(#4605)); +#4605 = SURFACE_STYLE_FILL_AREA(#4606); +#4606 = FILL_AREA_STYLE('',(#4607)); +#4607 = FILL_AREA_STYLE_COLOUR('',#4200); +#4608 = STYLED_ITEM('color',(#4609),#2396); +#4609 = PRESENTATION_STYLE_ASSIGNMENT((#4610)); +#4610 = SURFACE_STYLE_USAGE(.BOTH.,#4611); +#4611 = SURFACE_SIDE_STYLE('',(#4612)); +#4612 = SURFACE_STYLE_FILL_AREA(#4613); +#4613 = FILL_AREA_STYLE('',(#4614)); +#4614 = FILL_AREA_STYLE_COLOUR('',#4200); +#4615 = STYLED_ITEM('color',(#4616),#2420); +#4616 = PRESENTATION_STYLE_ASSIGNMENT((#4617)); +#4617 = SURFACE_STYLE_USAGE(.BOTH.,#4618); +#4618 = SURFACE_SIDE_STYLE('',(#4619)); +#4619 = SURFACE_STYLE_FILL_AREA(#4620); +#4620 = FILL_AREA_STYLE('',(#4621)); +#4621 = FILL_AREA_STYLE_COLOUR('',#4200); +#4622 = STYLED_ITEM('color',(#4623),#2444); +#4623 = PRESENTATION_STYLE_ASSIGNMENT((#4624)); +#4624 = SURFACE_STYLE_USAGE(.BOTH.,#4625); +#4625 = SURFACE_SIDE_STYLE('',(#4626)); +#4626 = SURFACE_STYLE_FILL_AREA(#4627); +#4627 = FILL_AREA_STYLE('',(#4628)); +#4628 = FILL_AREA_STYLE_COLOUR('',#4200); +#4629 = STYLED_ITEM('color',(#4630),#2461); +#4630 = PRESENTATION_STYLE_ASSIGNMENT((#4631)); +#4631 = SURFACE_STYLE_USAGE(.BOTH.,#4632); +#4632 = SURFACE_SIDE_STYLE('',(#4633)); +#4633 = SURFACE_STYLE_FILL_AREA(#4634); +#4634 = FILL_AREA_STYLE('',(#4635)); +#4635 = FILL_AREA_STYLE_COLOUR('',#4200); +#4636 = STYLED_ITEM('color',(#4637),#2492); +#4637 = PRESENTATION_STYLE_ASSIGNMENT((#4638)); +#4638 = SURFACE_STYLE_USAGE(.BOTH.,#4639); +#4639 = SURFACE_SIDE_STYLE('',(#4640)); +#4640 = SURFACE_STYLE_FILL_AREA(#4641); +#4641 = FILL_AREA_STYLE('',(#4642)); +#4642 = FILL_AREA_STYLE_COLOUR('',#4200); +#4643 = STYLED_ITEM('color',(#4644),#2516); +#4644 = PRESENTATION_STYLE_ASSIGNMENT((#4645)); +#4645 = SURFACE_STYLE_USAGE(.BOTH.,#4646); +#4646 = SURFACE_SIDE_STYLE('',(#4647)); +#4647 = SURFACE_STYLE_FILL_AREA(#4648); +#4648 = FILL_AREA_STYLE('',(#4649)); +#4649 = FILL_AREA_STYLE_COLOUR('',#4200); +#4650 = STYLED_ITEM('color',(#4651),#2540); +#4651 = PRESENTATION_STYLE_ASSIGNMENT((#4652)); +#4652 = SURFACE_STYLE_USAGE(.BOTH.,#4653); +#4653 = SURFACE_SIDE_STYLE('',(#4654)); +#4654 = SURFACE_STYLE_FILL_AREA(#4655); +#4655 = FILL_AREA_STYLE('',(#4656)); +#4656 = FILL_AREA_STYLE_COLOUR('',#4200); +#4657 = STYLED_ITEM('color',(#4658),#2557); +#4658 = PRESENTATION_STYLE_ASSIGNMENT((#4659)); +#4659 = SURFACE_STYLE_USAGE(.BOTH.,#4660); +#4660 = SURFACE_SIDE_STYLE('',(#4661)); +#4661 = SURFACE_STYLE_FILL_AREA(#4662); +#4662 = FILL_AREA_STYLE('',(#4663)); +#4663 = FILL_AREA_STYLE_COLOUR('',#4200); +#4664 = STYLED_ITEM('color',(#4665),#2588); +#4665 = PRESENTATION_STYLE_ASSIGNMENT((#4666)); +#4666 = SURFACE_STYLE_USAGE(.BOTH.,#4667); +#4667 = SURFACE_SIDE_STYLE('',(#4668)); +#4668 = SURFACE_STYLE_FILL_AREA(#4669); +#4669 = FILL_AREA_STYLE('',(#4670)); +#4670 = FILL_AREA_STYLE_COLOUR('',#4200); +#4671 = STYLED_ITEM('color',(#4672),#2612); +#4672 = PRESENTATION_STYLE_ASSIGNMENT((#4673)); +#4673 = SURFACE_STYLE_USAGE(.BOTH.,#4674); +#4674 = SURFACE_SIDE_STYLE('',(#4675)); +#4675 = SURFACE_STYLE_FILL_AREA(#4676); +#4676 = FILL_AREA_STYLE('',(#4677)); +#4677 = FILL_AREA_STYLE_COLOUR('',#4200); +#4678 = STYLED_ITEM('color',(#4679),#2636); +#4679 = PRESENTATION_STYLE_ASSIGNMENT((#4680)); +#4680 = SURFACE_STYLE_USAGE(.BOTH.,#4681); +#4681 = SURFACE_SIDE_STYLE('',(#4682)); +#4682 = SURFACE_STYLE_FILL_AREA(#4683); +#4683 = FILL_AREA_STYLE('',(#4684)); +#4684 = FILL_AREA_STYLE_COLOUR('',#4200); +#4685 = STYLED_ITEM('color',(#4686),#2653); +#4686 = PRESENTATION_STYLE_ASSIGNMENT((#4687)); +#4687 = SURFACE_STYLE_USAGE(.BOTH.,#4688); +#4688 = SURFACE_SIDE_STYLE('',(#4689)); +#4689 = SURFACE_STYLE_FILL_AREA(#4690); +#4690 = FILL_AREA_STYLE('',(#4691)); +#4691 = FILL_AREA_STYLE_COLOUR('',#4200); +#4692 = STYLED_ITEM('color',(#4693),#2684); +#4693 = PRESENTATION_STYLE_ASSIGNMENT((#4694)); +#4694 = SURFACE_STYLE_USAGE(.BOTH.,#4695); +#4695 = SURFACE_SIDE_STYLE('',(#4696)); +#4696 = SURFACE_STYLE_FILL_AREA(#4697); +#4697 = FILL_AREA_STYLE('',(#4698)); +#4698 = FILL_AREA_STYLE_COLOUR('',#4200); +#4699 = STYLED_ITEM('color',(#4700),#2708); +#4700 = PRESENTATION_STYLE_ASSIGNMENT((#4701)); +#4701 = SURFACE_STYLE_USAGE(.BOTH.,#4702); +#4702 = SURFACE_SIDE_STYLE('',(#4703)); +#4703 = SURFACE_STYLE_FILL_AREA(#4704); +#4704 = FILL_AREA_STYLE('',(#4705)); +#4705 = FILL_AREA_STYLE_COLOUR('',#4200); +#4706 = STYLED_ITEM('color',(#4707),#2732); +#4707 = PRESENTATION_STYLE_ASSIGNMENT((#4708)); +#4708 = SURFACE_STYLE_USAGE(.BOTH.,#4709); +#4709 = SURFACE_SIDE_STYLE('',(#4710)); +#4710 = SURFACE_STYLE_FILL_AREA(#4711); +#4711 = FILL_AREA_STYLE('',(#4712)); +#4712 = FILL_AREA_STYLE_COLOUR('',#4200); +#4713 = STYLED_ITEM('color',(#4714),#2749); +#4714 = PRESENTATION_STYLE_ASSIGNMENT((#4715)); +#4715 = SURFACE_STYLE_USAGE(.BOTH.,#4716); +#4716 = SURFACE_SIDE_STYLE('',(#4717)); +#4717 = SURFACE_STYLE_FILL_AREA(#4718); +#4718 = FILL_AREA_STYLE('',(#4719)); +#4719 = FILL_AREA_STYLE_COLOUR('',#4200); +#4720 = STYLED_ITEM('color',(#4721),#2780); +#4721 = PRESENTATION_STYLE_ASSIGNMENT((#4722)); +#4722 = SURFACE_STYLE_USAGE(.BOTH.,#4723); +#4723 = SURFACE_SIDE_STYLE('',(#4724)); +#4724 = SURFACE_STYLE_FILL_AREA(#4725); +#4725 = FILL_AREA_STYLE('',(#4726)); +#4726 = FILL_AREA_STYLE_COLOUR('',#4200); +#4727 = STYLED_ITEM('color',(#4728),#2804); +#4728 = PRESENTATION_STYLE_ASSIGNMENT((#4729)); +#4729 = SURFACE_STYLE_USAGE(.BOTH.,#4730); +#4730 = SURFACE_SIDE_STYLE('',(#4731)); +#4731 = SURFACE_STYLE_FILL_AREA(#4732); +#4732 = FILL_AREA_STYLE('',(#4733)); +#4733 = FILL_AREA_STYLE_COLOUR('',#4200); +#4734 = STYLED_ITEM('color',(#4735),#2828); +#4735 = PRESENTATION_STYLE_ASSIGNMENT((#4736)); +#4736 = SURFACE_STYLE_USAGE(.BOTH.,#4737); +#4737 = SURFACE_SIDE_STYLE('',(#4738)); +#4738 = SURFACE_STYLE_FILL_AREA(#4739); +#4739 = FILL_AREA_STYLE('',(#4740)); +#4740 = FILL_AREA_STYLE_COLOUR('',#4200); +#4741 = STYLED_ITEM('color',(#4742),#2845); +#4742 = PRESENTATION_STYLE_ASSIGNMENT((#4743)); +#4743 = SURFACE_STYLE_USAGE(.BOTH.,#4744); +#4744 = SURFACE_SIDE_STYLE('',(#4745)); +#4745 = SURFACE_STYLE_FILL_AREA(#4746); +#4746 = FILL_AREA_STYLE('',(#4747)); +#4747 = FILL_AREA_STYLE_COLOUR('',#4200); +#4748 = STYLED_ITEM('color',(#4749),#2876); +#4749 = PRESENTATION_STYLE_ASSIGNMENT((#4750)); +#4750 = SURFACE_STYLE_USAGE(.BOTH.,#4751); +#4751 = SURFACE_SIDE_STYLE('',(#4752)); +#4752 = SURFACE_STYLE_FILL_AREA(#4753); +#4753 = FILL_AREA_STYLE('',(#4754)); +#4754 = FILL_AREA_STYLE_COLOUR('',#4200); +#4755 = STYLED_ITEM('color',(#4756),#2900); +#4756 = PRESENTATION_STYLE_ASSIGNMENT((#4757)); +#4757 = SURFACE_STYLE_USAGE(.BOTH.,#4758); +#4758 = SURFACE_SIDE_STYLE('',(#4759)); +#4759 = SURFACE_STYLE_FILL_AREA(#4760); +#4760 = FILL_AREA_STYLE('',(#4761)); +#4761 = FILL_AREA_STYLE_COLOUR('',#4200); +#4762 = STYLED_ITEM('color',(#4763),#2924); +#4763 = PRESENTATION_STYLE_ASSIGNMENT((#4764)); +#4764 = SURFACE_STYLE_USAGE(.BOTH.,#4765); +#4765 = SURFACE_SIDE_STYLE('',(#4766)); +#4766 = SURFACE_STYLE_FILL_AREA(#4767); +#4767 = FILL_AREA_STYLE('',(#4768)); +#4768 = FILL_AREA_STYLE_COLOUR('',#4200); +#4769 = STYLED_ITEM('color',(#4770),#2941); +#4770 = PRESENTATION_STYLE_ASSIGNMENT((#4771)); +#4771 = SURFACE_STYLE_USAGE(.BOTH.,#4772); +#4772 = SURFACE_SIDE_STYLE('',(#4773)); +#4773 = SURFACE_STYLE_FILL_AREA(#4774); +#4774 = FILL_AREA_STYLE('',(#4775)); +#4775 = FILL_AREA_STYLE_COLOUR('',#4200); +#4776 = STYLED_ITEM('color',(#4777),#2972); +#4777 = PRESENTATION_STYLE_ASSIGNMENT((#4778)); +#4778 = SURFACE_STYLE_USAGE(.BOTH.,#4779); +#4779 = SURFACE_SIDE_STYLE('',(#4780)); +#4780 = SURFACE_STYLE_FILL_AREA(#4781); +#4781 = FILL_AREA_STYLE('',(#4782)); +#4782 = FILL_AREA_STYLE_COLOUR('',#4200); +#4783 = STYLED_ITEM('color',(#4784),#2996); +#4784 = PRESENTATION_STYLE_ASSIGNMENT((#4785)); +#4785 = SURFACE_STYLE_USAGE(.BOTH.,#4786); +#4786 = SURFACE_SIDE_STYLE('',(#4787)); +#4787 = SURFACE_STYLE_FILL_AREA(#4788); +#4788 = FILL_AREA_STYLE('',(#4789)); +#4789 = FILL_AREA_STYLE_COLOUR('',#4200); +#4790 = STYLED_ITEM('color',(#4791),#3020); +#4791 = PRESENTATION_STYLE_ASSIGNMENT((#4792)); +#4792 = SURFACE_STYLE_USAGE(.BOTH.,#4793); +#4793 = SURFACE_SIDE_STYLE('',(#4794)); +#4794 = SURFACE_STYLE_FILL_AREA(#4795); +#4795 = FILL_AREA_STYLE('',(#4796)); +#4796 = FILL_AREA_STYLE_COLOUR('',#4200); +#4797 = STYLED_ITEM('color',(#4798),#3037); +#4798 = PRESENTATION_STYLE_ASSIGNMENT((#4799)); +#4799 = SURFACE_STYLE_USAGE(.BOTH.,#4800); +#4800 = SURFACE_SIDE_STYLE('',(#4801)); +#4801 = SURFACE_STYLE_FILL_AREA(#4802); +#4802 = FILL_AREA_STYLE('',(#4803)); +#4803 = FILL_AREA_STYLE_COLOUR('',#4200); +#4804 = STYLED_ITEM('color',(#4805),#3068); +#4805 = PRESENTATION_STYLE_ASSIGNMENT((#4806)); +#4806 = SURFACE_STYLE_USAGE(.BOTH.,#4807); +#4807 = SURFACE_SIDE_STYLE('',(#4808)); +#4808 = SURFACE_STYLE_FILL_AREA(#4809); +#4809 = FILL_AREA_STYLE('',(#4810)); +#4810 = FILL_AREA_STYLE_COLOUR('',#4200); +#4811 = STYLED_ITEM('color',(#4812),#3092); +#4812 = PRESENTATION_STYLE_ASSIGNMENT((#4813)); +#4813 = SURFACE_STYLE_USAGE(.BOTH.,#4814); +#4814 = SURFACE_SIDE_STYLE('',(#4815)); +#4815 = SURFACE_STYLE_FILL_AREA(#4816); +#4816 = FILL_AREA_STYLE('',(#4817)); +#4817 = FILL_AREA_STYLE_COLOUR('',#4200); +#4818 = STYLED_ITEM('color',(#4819),#3116); +#4819 = PRESENTATION_STYLE_ASSIGNMENT((#4820)); +#4820 = SURFACE_STYLE_USAGE(.BOTH.,#4821); +#4821 = SURFACE_SIDE_STYLE('',(#4822)); +#4822 = SURFACE_STYLE_FILL_AREA(#4823); +#4823 = FILL_AREA_STYLE('',(#4824)); +#4824 = FILL_AREA_STYLE_COLOUR('',#4200); +#4825 = STYLED_ITEM('color',(#4826),#3133); +#4826 = PRESENTATION_STYLE_ASSIGNMENT((#4827)); +#4827 = SURFACE_STYLE_USAGE(.BOTH.,#4828); +#4828 = SURFACE_SIDE_STYLE('',(#4829)); +#4829 = SURFACE_STYLE_FILL_AREA(#4830); +#4830 = FILL_AREA_STYLE('',(#4831)); +#4831 = FILL_AREA_STYLE_COLOUR('',#4200); +#4832 = STYLED_ITEM('color',(#4833),#3164); +#4833 = PRESENTATION_STYLE_ASSIGNMENT((#4834)); +#4834 = SURFACE_STYLE_USAGE(.BOTH.,#4835); +#4835 = SURFACE_SIDE_STYLE('',(#4836)); +#4836 = SURFACE_STYLE_FILL_AREA(#4837); +#4837 = FILL_AREA_STYLE('',(#4838)); +#4838 = FILL_AREA_STYLE_COLOUR('',#4200); +#4839 = STYLED_ITEM('color',(#4840),#3188); +#4840 = PRESENTATION_STYLE_ASSIGNMENT((#4841)); +#4841 = SURFACE_STYLE_USAGE(.BOTH.,#4842); +#4842 = SURFACE_SIDE_STYLE('',(#4843)); +#4843 = SURFACE_STYLE_FILL_AREA(#4844); +#4844 = FILL_AREA_STYLE('',(#4845)); +#4845 = FILL_AREA_STYLE_COLOUR('',#4200); +#4846 = STYLED_ITEM('color',(#4847),#3212); +#4847 = PRESENTATION_STYLE_ASSIGNMENT((#4848)); +#4848 = SURFACE_STYLE_USAGE(.BOTH.,#4849); +#4849 = SURFACE_SIDE_STYLE('',(#4850)); +#4850 = SURFACE_STYLE_FILL_AREA(#4851); +#4851 = FILL_AREA_STYLE('',(#4852)); +#4852 = FILL_AREA_STYLE_COLOUR('',#4200); +#4853 = STYLED_ITEM('color',(#4854),#3229); +#4854 = PRESENTATION_STYLE_ASSIGNMENT((#4855)); +#4855 = SURFACE_STYLE_USAGE(.BOTH.,#4856); +#4856 = SURFACE_SIDE_STYLE('',(#4857)); +#4857 = SURFACE_STYLE_FILL_AREA(#4858); +#4858 = FILL_AREA_STYLE('',(#4859)); +#4859 = FILL_AREA_STYLE_COLOUR('',#4200); +#4860 = STYLED_ITEM('color',(#4861),#3260); +#4861 = PRESENTATION_STYLE_ASSIGNMENT((#4862)); +#4862 = SURFACE_STYLE_USAGE(.BOTH.,#4863); +#4863 = SURFACE_SIDE_STYLE('',(#4864)); +#4864 = SURFACE_STYLE_FILL_AREA(#4865); +#4865 = FILL_AREA_STYLE('',(#4866)); +#4866 = FILL_AREA_STYLE_COLOUR('',#4200); +#4867 = STYLED_ITEM('color',(#4868),#3284); +#4868 = PRESENTATION_STYLE_ASSIGNMENT((#4869)); +#4869 = SURFACE_STYLE_USAGE(.BOTH.,#4870); +#4870 = SURFACE_SIDE_STYLE('',(#4871)); +#4871 = SURFACE_STYLE_FILL_AREA(#4872); +#4872 = FILL_AREA_STYLE('',(#4873)); +#4873 = FILL_AREA_STYLE_COLOUR('',#4200); +#4874 = STYLED_ITEM('color',(#4875),#3308); +#4875 = PRESENTATION_STYLE_ASSIGNMENT((#4876)); +#4876 = SURFACE_STYLE_USAGE(.BOTH.,#4877); +#4877 = SURFACE_SIDE_STYLE('',(#4878)); +#4878 = SURFACE_STYLE_FILL_AREA(#4879); +#4879 = FILL_AREA_STYLE('',(#4880)); +#4880 = FILL_AREA_STYLE_COLOUR('',#4200); +#4881 = STYLED_ITEM('color',(#4882),#3325); +#4882 = PRESENTATION_STYLE_ASSIGNMENT((#4883)); +#4883 = SURFACE_STYLE_USAGE(.BOTH.,#4884); +#4884 = SURFACE_SIDE_STYLE('',(#4885)); +#4885 = SURFACE_STYLE_FILL_AREA(#4886); +#4886 = FILL_AREA_STYLE('',(#4887)); +#4887 = FILL_AREA_STYLE_COLOUR('',#4200); +#4888 = STYLED_ITEM('color',(#4889),#3356); +#4889 = PRESENTATION_STYLE_ASSIGNMENT((#4890)); +#4890 = SURFACE_STYLE_USAGE(.BOTH.,#4891); +#4891 = SURFACE_SIDE_STYLE('',(#4892)); +#4892 = SURFACE_STYLE_FILL_AREA(#4893); +#4893 = FILL_AREA_STYLE('',(#4894)); +#4894 = FILL_AREA_STYLE_COLOUR('',#4200); +#4895 = STYLED_ITEM('color',(#4896),#3380); +#4896 = PRESENTATION_STYLE_ASSIGNMENT((#4897)); +#4897 = SURFACE_STYLE_USAGE(.BOTH.,#4898); +#4898 = SURFACE_SIDE_STYLE('',(#4899)); +#4899 = SURFACE_STYLE_FILL_AREA(#4900); +#4900 = FILL_AREA_STYLE('',(#4901)); +#4901 = FILL_AREA_STYLE_COLOUR('',#4200); +#4902 = STYLED_ITEM('color',(#4903),#3404); +#4903 = PRESENTATION_STYLE_ASSIGNMENT((#4904)); +#4904 = SURFACE_STYLE_USAGE(.BOTH.,#4905); +#4905 = SURFACE_SIDE_STYLE('',(#4906)); +#4906 = SURFACE_STYLE_FILL_AREA(#4907); +#4907 = FILL_AREA_STYLE('',(#4908)); +#4908 = FILL_AREA_STYLE_COLOUR('',#4200); +#4909 = STYLED_ITEM('color',(#4910),#3421); +#4910 = PRESENTATION_STYLE_ASSIGNMENT((#4911)); +#4911 = SURFACE_STYLE_USAGE(.BOTH.,#4912); +#4912 = SURFACE_SIDE_STYLE('',(#4913)); +#4913 = SURFACE_STYLE_FILL_AREA(#4914); +#4914 = FILL_AREA_STYLE('',(#4915)); +#4915 = FILL_AREA_STYLE_COLOUR('',#4200); +#4916 = STYLED_ITEM('color',(#4917),#3452); +#4917 = PRESENTATION_STYLE_ASSIGNMENT((#4918)); +#4918 = SURFACE_STYLE_USAGE(.BOTH.,#4919); +#4919 = SURFACE_SIDE_STYLE('',(#4920)); +#4920 = SURFACE_STYLE_FILL_AREA(#4921); +#4921 = FILL_AREA_STYLE('',(#4922)); +#4922 = FILL_AREA_STYLE_COLOUR('',#4200); +#4923 = STYLED_ITEM('color',(#4924),#3476); +#4924 = PRESENTATION_STYLE_ASSIGNMENT((#4925)); +#4925 = SURFACE_STYLE_USAGE(.BOTH.,#4926); +#4926 = SURFACE_SIDE_STYLE('',(#4927)); +#4927 = SURFACE_STYLE_FILL_AREA(#4928); +#4928 = FILL_AREA_STYLE('',(#4929)); +#4929 = FILL_AREA_STYLE_COLOUR('',#4200); +#4930 = STYLED_ITEM('color',(#4931),#3500); +#4931 = PRESENTATION_STYLE_ASSIGNMENT((#4932)); +#4932 = SURFACE_STYLE_USAGE(.BOTH.,#4933); +#4933 = SURFACE_SIDE_STYLE('',(#4934)); +#4934 = SURFACE_STYLE_FILL_AREA(#4935); +#4935 = FILL_AREA_STYLE('',(#4936)); +#4936 = FILL_AREA_STYLE_COLOUR('',#4200); +#4937 = STYLED_ITEM('color',(#4938),#3517); +#4938 = PRESENTATION_STYLE_ASSIGNMENT((#4939)); +#4939 = SURFACE_STYLE_USAGE(.BOTH.,#4940); +#4940 = SURFACE_SIDE_STYLE('',(#4941)); +#4941 = SURFACE_STYLE_FILL_AREA(#4942); +#4942 = FILL_AREA_STYLE('',(#4943)); +#4943 = FILL_AREA_STYLE_COLOUR('',#4200); +#4944 = STYLED_ITEM('color',(#4945),#3548); +#4945 = PRESENTATION_STYLE_ASSIGNMENT((#4946)); +#4946 = SURFACE_STYLE_USAGE(.BOTH.,#4947); +#4947 = SURFACE_SIDE_STYLE('',(#4948)); +#4948 = SURFACE_STYLE_FILL_AREA(#4949); +#4949 = FILL_AREA_STYLE('',(#4950)); +#4950 = FILL_AREA_STYLE_COLOUR('',#4200); +#4951 = STYLED_ITEM('color',(#4952),#3572); +#4952 = PRESENTATION_STYLE_ASSIGNMENT((#4953)); +#4953 = SURFACE_STYLE_USAGE(.BOTH.,#4954); +#4954 = SURFACE_SIDE_STYLE('',(#4955)); +#4955 = SURFACE_STYLE_FILL_AREA(#4956); +#4956 = FILL_AREA_STYLE('',(#4957)); +#4957 = FILL_AREA_STYLE_COLOUR('',#4200); +#4958 = STYLED_ITEM('color',(#4959),#3596); +#4959 = PRESENTATION_STYLE_ASSIGNMENT((#4960)); +#4960 = SURFACE_STYLE_USAGE(.BOTH.,#4961); +#4961 = SURFACE_SIDE_STYLE('',(#4962)); +#4962 = SURFACE_STYLE_FILL_AREA(#4963); +#4963 = FILL_AREA_STYLE('',(#4964)); +#4964 = FILL_AREA_STYLE_COLOUR('',#4200); +#4965 = STYLED_ITEM('color',(#4966),#3613); +#4966 = PRESENTATION_STYLE_ASSIGNMENT((#4967)); +#4967 = SURFACE_STYLE_USAGE(.BOTH.,#4968); +#4968 = SURFACE_SIDE_STYLE('',(#4969)); +#4969 = SURFACE_STYLE_FILL_AREA(#4970); +#4970 = FILL_AREA_STYLE('',(#4971)); +#4971 = FILL_AREA_STYLE_COLOUR('',#4200); +#4972 = STYLED_ITEM('color',(#4973),#3644); +#4973 = PRESENTATION_STYLE_ASSIGNMENT((#4974)); +#4974 = SURFACE_STYLE_USAGE(.BOTH.,#4975); +#4975 = SURFACE_SIDE_STYLE('',(#4976)); +#4976 = SURFACE_STYLE_FILL_AREA(#4977); +#4977 = FILL_AREA_STYLE('',(#4978)); +#4978 = FILL_AREA_STYLE_COLOUR('',#4200); +#4979 = STYLED_ITEM('color',(#4980),#3668); +#4980 = PRESENTATION_STYLE_ASSIGNMENT((#4981)); +#4981 = SURFACE_STYLE_USAGE(.BOTH.,#4982); +#4982 = SURFACE_SIDE_STYLE('',(#4983)); +#4983 = SURFACE_STYLE_FILL_AREA(#4984); +#4984 = FILL_AREA_STYLE('',(#4985)); +#4985 = FILL_AREA_STYLE_COLOUR('',#4200); +#4986 = STYLED_ITEM('color',(#4987),#3692); +#4987 = PRESENTATION_STYLE_ASSIGNMENT((#4988)); +#4988 = SURFACE_STYLE_USAGE(.BOTH.,#4989); +#4989 = SURFACE_SIDE_STYLE('',(#4990)); +#4990 = SURFACE_STYLE_FILL_AREA(#4991); +#4991 = FILL_AREA_STYLE('',(#4992)); +#4992 = FILL_AREA_STYLE_COLOUR('',#4200); +#4993 = STYLED_ITEM('color',(#4994),#3709); +#4994 = PRESENTATION_STYLE_ASSIGNMENT((#4995)); +#4995 = SURFACE_STYLE_USAGE(.BOTH.,#4996); +#4996 = SURFACE_SIDE_STYLE('',(#4997)); +#4997 = SURFACE_STYLE_FILL_AREA(#4998); +#4998 = FILL_AREA_STYLE('',(#4999)); +#4999 = FILL_AREA_STYLE_COLOUR('',#4200); +#5000 = STYLED_ITEM('color',(#5001),#3740); +#5001 = PRESENTATION_STYLE_ASSIGNMENT((#5002)); +#5002 = SURFACE_STYLE_USAGE(.BOTH.,#5003); +#5003 = SURFACE_SIDE_STYLE('',(#5004)); +#5004 = SURFACE_STYLE_FILL_AREA(#5005); +#5005 = FILL_AREA_STYLE('',(#5006)); +#5006 = FILL_AREA_STYLE_COLOUR('',#4200); +#5007 = STYLED_ITEM('color',(#5008),#3764); +#5008 = PRESENTATION_STYLE_ASSIGNMENT((#5009)); +#5009 = SURFACE_STYLE_USAGE(.BOTH.,#5010); +#5010 = SURFACE_SIDE_STYLE('',(#5011)); +#5011 = SURFACE_STYLE_FILL_AREA(#5012); +#5012 = FILL_AREA_STYLE('',(#5013)); +#5013 = FILL_AREA_STYLE_COLOUR('',#4200); +#5014 = STYLED_ITEM('color',(#5015),#3788); +#5015 = PRESENTATION_STYLE_ASSIGNMENT((#5016)); +#5016 = SURFACE_STYLE_USAGE(.BOTH.,#5017); +#5017 = SURFACE_SIDE_STYLE('',(#5018)); +#5018 = SURFACE_STYLE_FILL_AREA(#5019); +#5019 = FILL_AREA_STYLE('',(#5020)); +#5020 = FILL_AREA_STYLE_COLOUR('',#4200); +#5021 = STYLED_ITEM('color',(#5022),#3805); +#5022 = PRESENTATION_STYLE_ASSIGNMENT((#5023)); +#5023 = SURFACE_STYLE_USAGE(.BOTH.,#5024); +#5024 = SURFACE_SIDE_STYLE('',(#5025)); +#5025 = SURFACE_STYLE_FILL_AREA(#5026); +#5026 = FILL_AREA_STYLE('',(#5027)); +#5027 = FILL_AREA_STYLE_COLOUR('',#4236); +#5028 = STYLED_ITEM('color',(#5029),#3828); +#5029 = PRESENTATION_STYLE_ASSIGNMENT((#5030)); +#5030 = SURFACE_STYLE_USAGE(.BOTH.,#5031); +#5031 = SURFACE_SIDE_STYLE('',(#5032)); +#5032 = SURFACE_STYLE_FILL_AREA(#5033); +#5033 = FILL_AREA_STYLE('',(#5034)); +#5034 = FILL_AREA_STYLE_COLOUR('',#4200); +#5035 = STYLED_ITEM('color',(#5036),#3840); +#5036 = PRESENTATION_STYLE_ASSIGNMENT((#5037)); +#5037 = SURFACE_STYLE_USAGE(.BOTH.,#5038); +#5038 = SURFACE_SIDE_STYLE('',(#5039)); +#5039 = SURFACE_STYLE_FILL_AREA(#5040); +#5040 = FILL_AREA_STYLE('',(#5041)); +#5041 = FILL_AREA_STYLE_COLOUR('',#4200); +#5042 = STYLED_ITEM('color',(#5043),#3852); +#5043 = PRESENTATION_STYLE_ASSIGNMENT((#5044)); +#5044 = SURFACE_STYLE_USAGE(.BOTH.,#5045); +#5045 = SURFACE_SIDE_STYLE('',(#5046)); +#5046 = SURFACE_STYLE_FILL_AREA(#5047); +#5047 = FILL_AREA_STYLE('',(#5048)); +#5048 = FILL_AREA_STYLE_COLOUR('',#4200); +#5049 = STYLED_ITEM('color',(#5050),#3864); +#5050 = PRESENTATION_STYLE_ASSIGNMENT((#5051)); +#5051 = SURFACE_STYLE_USAGE(.BOTH.,#5052); +#5052 = SURFACE_SIDE_STYLE('',(#5053)); +#5053 = SURFACE_STYLE_FILL_AREA(#5054); +#5054 = FILL_AREA_STYLE('',(#5055)); +#5055 = FILL_AREA_STYLE_COLOUR('',#4200); +#5056 = STYLED_ITEM('color',(#5057),#3876); +#5057 = PRESENTATION_STYLE_ASSIGNMENT((#5058)); +#5058 = SURFACE_STYLE_USAGE(.BOTH.,#5059); +#5059 = SURFACE_SIDE_STYLE('',(#5060)); +#5060 = SURFACE_STYLE_FILL_AREA(#5061); +#5061 = FILL_AREA_STYLE('',(#5062)); +#5062 = FILL_AREA_STYLE_COLOUR('',#4200); +#5063 = STYLED_ITEM('color',(#5064),#3888); +#5064 = PRESENTATION_STYLE_ASSIGNMENT((#5065)); +#5065 = SURFACE_STYLE_USAGE(.BOTH.,#5066); +#5066 = SURFACE_SIDE_STYLE('',(#5067)); +#5067 = SURFACE_STYLE_FILL_AREA(#5068); +#5068 = FILL_AREA_STYLE('',(#5069)); +#5069 = FILL_AREA_STYLE_COLOUR('',#4200); +#5070 = STYLED_ITEM('color',(#5071),#3900); +#5071 = PRESENTATION_STYLE_ASSIGNMENT((#5072)); +#5072 = SURFACE_STYLE_USAGE(.BOTH.,#5073); +#5073 = SURFACE_SIDE_STYLE('',(#5074)); +#5074 = SURFACE_STYLE_FILL_AREA(#5075); +#5075 = FILL_AREA_STYLE('',(#5076)); +#5076 = FILL_AREA_STYLE_COLOUR('',#4200); +#5077 = STYLED_ITEM('color',(#5078),#3912); +#5078 = PRESENTATION_STYLE_ASSIGNMENT((#5079)); +#5079 = SURFACE_STYLE_USAGE(.BOTH.,#5080); +#5080 = SURFACE_SIDE_STYLE('',(#5081)); +#5081 = SURFACE_STYLE_FILL_AREA(#5082); +#5082 = FILL_AREA_STYLE('',(#5083)); +#5083 = FILL_AREA_STYLE_COLOUR('',#4200); +#5084 = STYLED_ITEM('color',(#5085),#3924); +#5085 = PRESENTATION_STYLE_ASSIGNMENT((#5086)); +#5086 = SURFACE_STYLE_USAGE(.BOTH.,#5087); +#5087 = SURFACE_SIDE_STYLE('',(#5088)); +#5088 = SURFACE_STYLE_FILL_AREA(#5089); +#5089 = FILL_AREA_STYLE('',(#5090)); +#5090 = FILL_AREA_STYLE_COLOUR('',#4200); +#5091 = STYLED_ITEM('color',(#5092),#3936); +#5092 = PRESENTATION_STYLE_ASSIGNMENT((#5093)); +#5093 = SURFACE_STYLE_USAGE(.BOTH.,#5094); +#5094 = SURFACE_SIDE_STYLE('',(#5095)); +#5095 = SURFACE_STYLE_FILL_AREA(#5096); +#5096 = FILL_AREA_STYLE('',(#5097)); +#5097 = FILL_AREA_STYLE_COLOUR('',#4200); +#5098 = STYLED_ITEM('color',(#5099),#3948); +#5099 = PRESENTATION_STYLE_ASSIGNMENT((#5100)); +#5100 = SURFACE_STYLE_USAGE(.BOTH.,#5101); +#5101 = SURFACE_SIDE_STYLE('',(#5102)); +#5102 = SURFACE_STYLE_FILL_AREA(#5103); +#5103 = FILL_AREA_STYLE('',(#5104)); +#5104 = FILL_AREA_STYLE_COLOUR('',#4200); +#5105 = STYLED_ITEM('color',(#5106),#3960); +#5106 = PRESENTATION_STYLE_ASSIGNMENT((#5107)); +#5107 = SURFACE_STYLE_USAGE(.BOTH.,#5108); +#5108 = SURFACE_SIDE_STYLE('',(#5109)); +#5109 = SURFACE_STYLE_FILL_AREA(#5110); +#5110 = FILL_AREA_STYLE('',(#5111)); +#5111 = FILL_AREA_STYLE_COLOUR('',#4200); +#5112 = STYLED_ITEM('color',(#5113),#3972); +#5113 = PRESENTATION_STYLE_ASSIGNMENT((#5114)); +#5114 = SURFACE_STYLE_USAGE(.BOTH.,#5115); +#5115 = SURFACE_SIDE_STYLE('',(#5116)); +#5116 = SURFACE_STYLE_FILL_AREA(#5117); +#5117 = FILL_AREA_STYLE('',(#5118)); +#5118 = FILL_AREA_STYLE_COLOUR('',#4200); +#5119 = STYLED_ITEM('color',(#5120),#3984); +#5120 = PRESENTATION_STYLE_ASSIGNMENT((#5121)); +#5121 = SURFACE_STYLE_USAGE(.BOTH.,#5122); +#5122 = SURFACE_SIDE_STYLE('',(#5123)); +#5123 = SURFACE_STYLE_FILL_AREA(#5124); +#5124 = FILL_AREA_STYLE('',(#5125)); +#5125 = FILL_AREA_STYLE_COLOUR('',#4200); +#5126 = STYLED_ITEM('color',(#5127),#3996); +#5127 = PRESENTATION_STYLE_ASSIGNMENT((#5128)); +#5128 = SURFACE_STYLE_USAGE(.BOTH.,#5129); +#5129 = SURFACE_SIDE_STYLE('',(#5130)); +#5130 = SURFACE_STYLE_FILL_AREA(#5131); +#5131 = FILL_AREA_STYLE('',(#5132)); +#5132 = FILL_AREA_STYLE_COLOUR('',#4200); +#5133 = STYLED_ITEM('color',(#5134),#4008); +#5134 = PRESENTATION_STYLE_ASSIGNMENT((#5135)); +#5135 = SURFACE_STYLE_USAGE(.BOTH.,#5136); +#5136 = SURFACE_SIDE_STYLE('',(#5137)); +#5137 = SURFACE_STYLE_FILL_AREA(#5138); +#5138 = FILL_AREA_STYLE('',(#5139)); +#5139 = FILL_AREA_STYLE_COLOUR('',#4200); +#5140 = STYLED_ITEM('color',(#5141),#4020); +#5141 = PRESENTATION_STYLE_ASSIGNMENT((#5142)); +#5142 = SURFACE_STYLE_USAGE(.BOTH.,#5143); +#5143 = SURFACE_SIDE_STYLE('',(#5144)); +#5144 = SURFACE_STYLE_FILL_AREA(#5145); +#5145 = FILL_AREA_STYLE('',(#5146)); +#5146 = FILL_AREA_STYLE_COLOUR('',#4200); +#5147 = STYLED_ITEM('color',(#5148),#4032); +#5148 = PRESENTATION_STYLE_ASSIGNMENT((#5149)); +#5149 = SURFACE_STYLE_USAGE(.BOTH.,#5150); +#5150 = SURFACE_SIDE_STYLE('',(#5151)); +#5151 = SURFACE_STYLE_FILL_AREA(#5152); +#5152 = FILL_AREA_STYLE('',(#5153)); +#5153 = FILL_AREA_STYLE_COLOUR('',#4200); +#5154 = STYLED_ITEM('color',(#5155),#4044); +#5155 = PRESENTATION_STYLE_ASSIGNMENT((#5156)); +#5156 = SURFACE_STYLE_USAGE(.BOTH.,#5157); +#5157 = SURFACE_SIDE_STYLE('',(#5158)); +#5158 = SURFACE_STYLE_FILL_AREA(#5159); +#5159 = FILL_AREA_STYLE('',(#5160)); +#5160 = FILL_AREA_STYLE_COLOUR('',#4200); +#5161 = STYLED_ITEM('color',(#5162),#4056); +#5162 = PRESENTATION_STYLE_ASSIGNMENT((#5163)); +#5163 = SURFACE_STYLE_USAGE(.BOTH.,#5164); +#5164 = SURFACE_SIDE_STYLE('',(#5165)); +#5165 = SURFACE_STYLE_FILL_AREA(#5166); +#5166 = FILL_AREA_STYLE('',(#5167)); +#5167 = FILL_AREA_STYLE_COLOUR('',#4200); +#5168 = STYLED_ITEM('color',(#5169),#4068); +#5169 = PRESENTATION_STYLE_ASSIGNMENT((#5170)); +#5170 = SURFACE_STYLE_USAGE(.BOTH.,#5171); +#5171 = SURFACE_SIDE_STYLE('',(#5172)); +#5172 = SURFACE_STYLE_FILL_AREA(#5173); +#5173 = FILL_AREA_STYLE('',(#5174)); +#5174 = FILL_AREA_STYLE_COLOUR('',#4200); +#5175 = STYLED_ITEM('color',(#5176),#4080); +#5176 = PRESENTATION_STYLE_ASSIGNMENT((#5177)); +#5177 = SURFACE_STYLE_USAGE(.BOTH.,#5178); +#5178 = SURFACE_SIDE_STYLE('',(#5179)); +#5179 = SURFACE_STYLE_FILL_AREA(#5180); +#5180 = FILL_AREA_STYLE('',(#5181)); +#5181 = FILL_AREA_STYLE_COLOUR('',#4200); +#5182 = STYLED_ITEM('color',(#5183),#4092); +#5183 = PRESENTATION_STYLE_ASSIGNMENT((#5184)); +#5184 = SURFACE_STYLE_USAGE(.BOTH.,#5185); +#5185 = SURFACE_SIDE_STYLE('',(#5186)); +#5186 = SURFACE_STYLE_FILL_AREA(#5187); +#5187 = FILL_AREA_STYLE('',(#5188)); +#5188 = FILL_AREA_STYLE_COLOUR('',#4200); +#5189 = STYLED_ITEM('color',(#5190),#4104); +#5190 = PRESENTATION_STYLE_ASSIGNMENT((#5191)); +#5191 = SURFACE_STYLE_USAGE(.BOTH.,#5192); +#5192 = SURFACE_SIDE_STYLE('',(#5193)); +#5193 = SURFACE_STYLE_FILL_AREA(#5194); +#5194 = FILL_AREA_STYLE('',(#5195)); +#5195 = FILL_AREA_STYLE_COLOUR('',#4200); +#5196 = STYLED_ITEM('color',(#5197),#4116); +#5197 = PRESENTATION_STYLE_ASSIGNMENT((#5198)); +#5198 = SURFACE_STYLE_USAGE(.BOTH.,#5199); +#5199 = SURFACE_SIDE_STYLE('',(#5200)); +#5200 = SURFACE_STYLE_FILL_AREA(#5201); +#5201 = FILL_AREA_STYLE('',(#5202)); +#5202 = FILL_AREA_STYLE_COLOUR('',#4200); +#5203 = STYLED_ITEM('color',(#5204),#4128); +#5204 = PRESENTATION_STYLE_ASSIGNMENT((#5205)); +#5205 = SURFACE_STYLE_USAGE(.BOTH.,#5206); +#5206 = SURFACE_SIDE_STYLE('',(#5207)); +#5207 = SURFACE_STYLE_FILL_AREA(#5208); +#5208 = FILL_AREA_STYLE('',(#5209)); +#5209 = FILL_AREA_STYLE_COLOUR('',#4200); +#5210 = STYLED_ITEM('color',(#5211),#4140); +#5211 = PRESENTATION_STYLE_ASSIGNMENT((#5212)); +#5212 = SURFACE_STYLE_USAGE(.BOTH.,#5213); +#5213 = SURFACE_SIDE_STYLE('',(#5214)); +#5214 = SURFACE_STYLE_FILL_AREA(#5215); +#5215 = FILL_AREA_STYLE('',(#5216)); +#5216 = FILL_AREA_STYLE_COLOUR('',#4200); +#5217 = STYLED_ITEM('color',(#5218),#4152); +#5218 = PRESENTATION_STYLE_ASSIGNMENT((#5219)); +#5219 = SURFACE_STYLE_USAGE(.BOTH.,#5220); +#5220 = SURFACE_SIDE_STYLE('',(#5221)); +#5221 = SURFACE_STYLE_FILL_AREA(#5222); +#5222 = FILL_AREA_STYLE('',(#5223)); +#5223 = FILL_AREA_STYLE_COLOUR('',#5224); +#5224 = COLOUR_RGB('',0.690999984741,0.663999974728,0.597999989986); +#5225 = STYLED_ITEM('color',(#5226),#4177); +#5226 = PRESENTATION_STYLE_ASSIGNMENT((#5227)); +#5227 = SURFACE_STYLE_USAGE(.BOTH.,#5228); +#5228 = SURFACE_SIDE_STYLE('',(#5229)); +#5229 = SURFACE_STYLE_FILL_AREA(#5230); +#5230 = FILL_AREA_STYLE('',(#5231)); +#5231 = FILL_AREA_STYLE_COLOUR('',#5224); +ENDSEC; +END-ISO-10303-21;
docs/bno055-datasheet.pdfadded⋯ 1 unchanged line ⋯
docs/hero.pngadded⋯ 1 unchanged line ⋯
package.jsonadded+29@@ -0,0 +1,29 @@+{+ "slug": "bno055",+ "version": "0.1.0",+ "type": "component",+ "description": "Bosch Sensortec Attitude Sensor/Gyroscope, LGA-28(3.8x5.2). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "sensor",+ "bno055"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "bno055.kicad_sym",+ "bno055.kicad_mod",+ "bno055.glb",+ "bno055.step",+ "bno055.lbr",+ "docs/hero.png",+ "docs/bno055-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ]+}
page.json+26−7@@ -4,8 +4,12 @@ "slug": "bno055", "title": "BNO055", "brief": "9-axis absolute orientation sensor with fusion, LGA-28",- "version": "1.0.0",- "tags": [],+ "version": "0.1.0",+ "tags": [+ "component",+ "sensor",+ "bno055"+ ], "license": "MIT", "component": { "mpn": "BNO055",@@ -20,18 +24,33 @@ }, "readme": "# BNO055\n\n9-axis absolute orientation sensor with fusion, LGA-28\n\nThe BNO055 is a 9-axis absolute orientation sensor from Bosch with built-in sensor fusion. Combines accelerometer, gyroscope, and magnetometer with a Cortex-M0 processor for ready-to-use orientation data.", "author": {- "id": "695820315b5f1e4db2fcf602", "name": "Kyle Bergstedt", "email": "[email protected]" },- "visibility": {- "public": true+ "visibility": "public",+ "hero": {+ "type": "image",+ "path": "docs/hero.png" },- "hero": null, "sample_prompts": [], "discovery_triggers": [], "discovery_pitch": null, "metadata": {}, "created_at": "2026-05-28T05:33:21.188Z",- "updated_at": "2026-05-28T05:33:21.188Z"+ "updated_at": "2026-05-28T05:33:21.188Z",+ "description": "Bosch Sensortec Attitude Sensor/Gyroscope, LGA-28(3.8x5.2). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "dependencies": {},+ "files": [+ "page.json",+ "README.md",+ "bno055.kicad_sym",+ "bno055.kicad_mod",+ "bno055.glb",+ "bno055.step",+ "bno055.lbr",+ "docs/hero.png",+ "docs/bno055-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ] }
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>bno055</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>bno055</title>