component
BL8023C
Public Made by Adomby adom
BL Shanghai Belling Relay / Coil Drivers, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBL8023C
BL Shanghai Belling · Relay / Coil Drivers · SOP-8
BL8023C from BL Shanghai Belling, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OA | output | Output A, relay driver output capable of 300mA typical driving current, logic state determined by inputs A and B according to logic function table. |
| 2 | NC | unconnected | Not connected to internal circuit. |
| 3 | A | input | Input A, active high with 3V threshold, input rise/fall time must be less than 1ms to prevent device damage. |
| 4 | GND | power_in | Ground, reference potential for device operation. |
| 5 | OB | output | Output B, relay driver output capable of 300mA typical driving current, logic state inverted relative to output A. |
| 6 | NC | unconnected | Not connected to internal circuit. |
| 7 | B | input | Input B, active high with 3V threshold, input rise/fall time must be less than 1ms to prevent device damage. |
| 8 | VIN | power_in | Supply voltage input, 5V to 36V operating range recommended, 40V absolute maximum, quiescent current 1μA typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BL Shanghai Belling |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
BL8023C - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
bl8023c-etched.step/bl8023c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bl8023c.step/bl8023c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: BL Shanghai Belling datasheet (6 pp, sha256
c3a0b0d0253348a3, retrieved 2026-09-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).