ATmega328P

@@ -2,9 +2,10 @@   "schema_version": 1,   "type": "component",   "slug": "atmega328p",-  "title": "ATmega328P — 8-bit AVR Microcontroller",-  "brief": "Microchip (Atmel) ATmega328P. 8-bit AVR RISC, 32KB flash, 2KB SRAM, 1KB EEPROM, 23 I/O, 10-bit ADC, 20 MHz, 1.8–5.5 V. The core of the Arduino Uno.",+  "title": "ATmega328P",+  "brief": "Microchip 8-bit AVR MCU, 28-pin DIP. 32 KB flash, 2 KB SRAM, 20 MHz, the Arduino Uno chip. Datasheet-verified.",   "version": "0.1.0",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "microcontroller",@@ -15,36 +16,250 @@     "pdip-28",     "microchip"   ],-  "license": "MIT",   "component": {-    "mpn": "ATmega328P — 8-bit AVR Microcontroller",-    "manufacturer": "Microchip (formerly Atmel)",-    "package": "",-    "pin_count": null,+    "mpn": "ATmega328P",+    "manufacturer": "Microchip Technology",+    "package": "PDIP-28",+    "pin_count": 28,     "category": "Microcontroller",-    "subcategory": "",-    "body_size": null,-    "parts": {},-    "distributor_links": {}+    "subcategory": "8-bit AVR MCU",+    "datasheet": "https://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061B.pdf",+    "parts": {+      "symbol": "atmega328p.kicad_sym",+      "footprint": "atmega328p.kicad_mod",+      "model_3d": "atmega328p.glb"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "PC6/RESET/PCINT14",+        "type": "bidirectional",+        "description": "Active-low reset input (when RSTDISBL fuse is unprogrammed); a low pulse longer than the minimum length generates a reset even without clock. If RSTDISBL is programmed, functions as PC6 GPIO (different electrical characteristics than other PC pins). Also PCINT14 pin-change interrupt source."+      },+      {+        "number": "2",+        "name": "PD0/RXD/PCINT16",+        "type": "bidirectional",+        "description": "Port D bit 0. Alternate functions: RXD (USART receive input), PCINT16 pin-change interrupt."+      },+      {+        "number": "3",+        "name": "PD1/TXD/PCINT17",+        "type": "bidirectional",+        "description": "Port D bit 1. Alternate functions: TXD (USART transmit output), PCINT17 pin-change interrupt."+      },+      {+        "number": "4",+        "name": "PD2/INT0/PCINT18",+        "type": "bidirectional",+        "description": "Port D bit 2. Alternate functions: INT0 external interrupt, PCINT18 pin-change interrupt."+      },+      {+        "number": "5",+        "name": "PD3/INT1/OC2B/PCINT19",+        "type": "bidirectional",+        "description": "Port D bit 3. Alternate functions: INT1 external interrupt, OC2B (Timer/Counter2 compare output B / PWM), PCINT19 pin-change interrupt."+      },+      {+        "number": "6",+        "name": "PD4/T0/XCK/PCINT20",+        "type": "bidirectional",+        "description": "Port D bit 4. Alternate functions: T0 (Timer/Counter0 external counter input), XCK (USART external clock), PCINT20 pin-change interrupt."+      },+      {+        "number": "7",+        "name": "VCC",+        "type": "power_in",+        "description": "Digital supply voltage. Operating range 1.8V-5.5V (speed-grade dependent: 20MHz requires 4.5-5.5V, 10MHz at 2.7V, 4MHz at 1.8V)."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference. Tie together with pin 22 GND and the AVCC ground return."+      },+      {+        "number": "9",+        "name": "PB6/XTAL1/TOSC1/PCINT6",+        "type": "bidirectional",+        "description": "Port B bit 6. Alternate functions: XTAL1 (input to inverting oscillator amplifier for external crystal/resonator), TOSC1 (Timer/Counter2 asynchronous oscillator input when AS2 in ASSR is set and internal RC oscillator selected), PCINT6 pin-change interrupt."+      },+      {+        "number": "10",+        "name": "PB7/XTAL2/TOSC2/PCINT7",+        "type": "bidirectional",+        "description": "Port B bit 7. Alternate functions: XTAL2 (output from inverting oscillator amplifier), TOSC2 (Timer/Counter2 asynchronous oscillator output), PCINT7 pin-change interrupt."+      },+      {+        "number": "11",+        "name": "PD5/T1/OC0B/PCINT21",+        "type": "bidirectional",+        "description": "Port D bit 5. Alternate functions: T1 (Timer/Counter1 external counter input), OC0B (Timer/Counter0 compare output B / PWM), PCINT21 pin-change interrupt."+      },+      {+        "number": "12",+        "name": "PD6/AIN0/OC0A/PCINT22",+        "type": "bidirectional",+        "description": "Port D bit 6. Alternate functions: AIN0 (analog comparator positive input), OC0A (Timer/Counter0 compare output A / PWM), PCINT22 pin-change interrupt."+      },+      {+        "number": "13",+        "name": "PD7/AIN1/PCINT23",+        "type": "bidirectional",+        "description": "Port D bit 7. Alternate functions: AIN1 (analog comparator negative input), PCINT23 pin-change interrupt."+      },+      {+        "number": "14",+        "name": "PB0/ICP1/CLKO/PCINT0",+        "type": "bidirectional",+        "description": "Port B bit 0. Alternate functions: ICP1 (Timer/Counter1 input capture), CLKO (divided system clock output when CKOUT fuse is programmed), PCINT0 pin-change interrupt."+      },+      {+        "number": "15",+        "name": "PB1/OC1A/PCINT1",+        "type": "bidirectional",+        "description": "Port B bit 1. Alternate functions: OC1A (Timer/Counter1 compare output A / PWM), PCINT1 pin-change interrupt."+      },+      {+        "number": "16",+        "name": "PB2/SS/OC1B/PCINT2",+        "type": "bidirectional",+        "description": "Port B bit 2. Alternate functions: SS (SPI slave-select input; also controls SPI master/slave mode via DDRB), OC1B (Timer/Counter1 compare output B / PWM), PCINT2 pin-change interrupt."+      },+      {+        "number": "17",+        "name": "PB3/MOSI/OC2A/PCINT3",+        "type": "bidirectional",+        "description": "Port B bit 3. Alternate functions: MOSI (SPI master-out/slave-in data), OC2A (Timer/Counter2 compare output A / PWM), PCINT3 pin-change interrupt. Also used for ISP programming (data in)."+      },+      {+        "number": "18",+        "name": "PB4/MISO/PCINT4",+        "type": "bidirectional",+        "description": "Port B bit 4. Alternate functions: MISO (SPI master-in/slave-out data), PCINT4 pin-change interrupt. Also used for ISP programming (data out)."+      },+      {+        "number": "19",+        "name": "PB5/SCK/PCINT5",+        "type": "bidirectional",+        "description": "Port B bit 5. Alternate functions: SCK (SPI bus clock), PCINT5 pin-change interrupt. Also used for ISP programming (clock)."+      },+      {+        "number": "20",+        "name": "AVCC",+        "type": "power_in",+        "description": "Analog supply voltage for the A/D converter, Port C (PC3:0) and (in TQFP/VQFN) ADC7:6. Must be externally connected to VCC even if the ADC is unused; if the ADC is used, connect through an LC low-pass filter for noise isolation."+      },+      {+        "number": "21",+        "name": "AREF",+        "type": "passive",+        "description": "Analog reference input for the A/D converter. Bypass with a decoupling capacitor to GND; may be driven externally or internally selected via ADMUX (AVCC or 1.1V internal bandgap)."+      },+      {+        "number": "22",+        "name": "GND",+        "type": "power_in",+        "description": "Analog ground return (shared with digital GND). Tie to pin 8 GND."+      },+      {+        "number": "23",+        "name": "PC0/ADC0/PCINT8",+        "type": "bidirectional",+        "description": "Port C bit 0. Alternate functions: ADC0 (analog input channel 0, 10-bit), PCINT8 pin-change interrupt."+      },+      {+        "number": "24",+        "name": "PC1/ADC1/PCINT9",+        "type": "bidirectional",+        "description": "Port C bit 1. Alternate functions: ADC1 (analog input channel 1, 10-bit), PCINT9 pin-change interrupt."+      },+      {+        "number": "25",+        "name": "PC2/ADC2/PCINT10",+        "type": "bidirectional",+        "description": "Port C bit 2. Alternate functions: ADC2 (analog input channel 2, 10-bit), PCINT10 pin-change interrupt."+      },+      {+        "number": "26",+        "name": "PC3/ADC3/PCINT11",+        "type": "bidirectional",+        "description": "Port C bit 3. Alternate functions: ADC3 (analog input channel 3, 10-bit), PCINT11 pin-change interrupt."+      },+      {+        "number": "27",+        "name": "PC4/ADC4/SDA/PCINT12",+        "type": "bidirectional",+        "description": "Port C bit 4. Alternate functions: ADC4 (analog input channel 4, 10-bit), SDA (TWI/I2C data line), PCINT12 pin-change interrupt."+      },+      {+        "number": "28",+        "name": "PC5/ADC5/SCL/PCINT13",+        "type": "bidirectional",+        "description": "Port C bit 5. Alternate functions: ADC5 (analog input channel 5, 10-bit), SCL (TWI/I2C clock line), PCINT13 pin-change interrupt."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061B.pdf",+        "pages": 653,+        "sha256": "b9b9d83cda56a95d",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   },-  "readme": "**Source:** [Microchip / Atmel Datasheet (DS40002061B)](https://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061B.pdf)\n**Manufacturer:** Microchip (formerly Atmel)\n**Part Number:** ATmega328P\n**Document:** DS40002061B — 2020 (megaAVR, part of ATmega48A/PA/88A/PA/168A/PA/328/P family datasheet)\n**Architecture:** 8-bit AVR RISC\n\n## Description\n\nThe ATmega328P is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, it achieves throughputs approaching 1 MIPS per MHz, allowing the system designer to optimize power consumption versus processing speed. The ATmega328P combines 32 KB of ISP flash with read-while-write capabilities, 1 KB EEPROM, 2 KB SRAM, 23 general-purpose I/O lines, 32 general-purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts, a serial programmable USART, a byte-oriented 2-wire serial interface, an SPI serial port, a 6-channel 10-bit ADC (8 channels in TQFP and QFN/MLF packages), a programmable watchdog timer with internal oscillator, and five software-selectable power-saving modes. This part is the microcontroller at the heart of the Arduino Uno / Nano / Pro Mini.\n\n## Key Specifications\n\n| Parameter | Value |\n| --- | --- |\n| Architecture | 8-bit AVR RISC |\n| Flash Memory | 32 KB (ISP, read-while-write) |\n| SRAM | 2 KB |\n| EEPROM | 1 KB |\n| Operating Voltage | 1.8 V – 5.5 V |\n| Max Clock | 20 MHz @ 4.5 V – 5.5 V |\n| Max MIPS | 20 MIPS @ 20 MHz |\n| Digital I/O Lines | 23 |\n| ADC | 10-bit, 8-channel (TQFP/VQFN), 6-channel (SPDIP) |\n| Timers | 2 × 8-bit + 1 × 16-bit, PWM channels ×6 |\n| Serial Interfaces | USART, SPI, 2-wire (I²C-compatible) |\n| Interrupt Sources | 26 |\n| Temperature Range | −40 °C to 85 °C (industrial); −40 °C to 105 °C (extended) |\n| Packages | 28-pin PDIP, 32-pin TQFP, 28-pad VQFN, 32-pad VQFN |\n| Active Current @ 8 MHz, 5 V | 5.2 mA typ |\n| Power-down Current @ 3 V | 0.1 µA typ |\n\n## Features\n\n- High-performance, low-power AVR 8-bit microcontroller\n- Advanced RISC architecture — 131 instructions, mostly single-cycle execution, 32 × 8 general-purpose working registers, fully static operation, up to 20 MIPS throughput at 20 MHz, on-chip 2-cycle multiplier\n- High-endurance non-volatile memory — 32 KB in-system self-programmable flash, 1 KB EEPROM, 2 KB internal SRAM; 10 000 flash / 100 000 EEPROM write-erase cycles; 20-year data retention at 85 °C / 100 years at 25 °C\n- Optional boot-loader section with independent lock bits; in-system programming via the on-chip boot program; true read-while-write operation\n- Programming lock for software security\n- QTouch library support: capacitive touch buttons, sliders and wheels; up to 64 sense channels\n- Peripheral features — Two 8-bit timer/counters and one 16-bit timer/counter with separate prescaler, compare & capture modes; real-time counter with separate oscillator; six PWM channels; 10-bit 6-channel ADC (SPDIP) or 8-channel ADC (TQFP/QFN) with optional temperature measurement; programmable serial USART; master/slave SPI; byte-oriented 2-wire serial (Philips I²C compatible); programmable watchdog timer with separate on-chip oscillator; on-chip analog comparator; interrupt & wake-up on pin change\n- Special microcontroller features — Power-on reset and programmable brown-out detection; internal calibrated RC oscillator; external and internal interrupt sources; six sleep modes: Idle, ADC noise reduction, Power-save, Power-down, Standby, Extended Standby\n- I/O and packages — 23 programmable I/O lines; 28-pin SPDIP, 32-lead TQFP, 28-pad VQFN, 32-pad VQFN\n- Operating voltage: 1.8 V – 5.5 V\n- Temperature range: −40 °C to 85 °C (industrial), extended to −40 °C to 105 °C on select orderable codes\n- Speed grades: 0 – 4 MHz @ 1.8 – 5.5 V, 0 – 10 MHz @ 2.7 – 5.5 V, 0 – 20 MHz @ 4.5 – 5.5 V\n- Ultra-low power: 0.2 mA active @ 1 MHz / 1.8 V / 25 °C; 0.1 µA power-down; 0.75 µA power-save (32 kHz RTC on)\n\n## Pin Configuration\n\nPinout shown for the 28-pin SPDIP / 28-pad VQFN package. The 32-pin TQFP / VQFN adds two extra ADC channels (ADC6, ADC7) and separate AVCC / AGND pins.\n\n| Pin | Name | Type | Description |\n| --- | --- | --- | --- |\n| 1 | PC6 / RESET | I/O / Reset | Port C bit 6 when RSTDISBL fuse is programmed; otherwise active-low reset. Also PCINT14. |\n| 2 | PD0 | I/O | Port D bit 0. RXD (USART input), PCINT16. |\n| 3 | PD1 | I/O | Port D bit 1. TXD (USART output), PCINT17. |\n| 4 | PD2 | I/O | Port D bit 2. INT0 external interrupt, PCINT18. |\n| 5 | PD3 | I/O | Port D bit 3. INT1, OC2B PWM, PCINT19. |\n| 6 | PD4 | I/O | Port D bit 4. XCK (USART clock) / T0 (Timer0 ext. clock), PCINT20. |\n| 7 | VCC | Power | Digital supply voltage (1.8 V – 5.5 V). |\n| 8 | GND | Power | Ground. |\n| 9 | PB6 | I/O / XTAL1 | Port B bit 6 or crystal/resonator input XTAL1 / TOSC1. PCINT6. |\n| 10 | PB7 | I/O / XTAL2 | Port B bit 7 or crystal/resonator output XTAL2 / TOSC2. PCINT7. |\n| 11 | PD5 | I/O | Port D bit 5. T1 (Timer1 ext. clock), OC0B PWM, PCINT21. |\n| 12 | PD6 | I/O | Port D bit 6. AIN0 (analog comparator +), OC0A PWM, PCINT22. |\n| 13 | PD7 | I/O | Port D bit 7. AIN1 (analog comparator −), PCINT23. |\n| 14 | PB0 | I/O | Port B bit 0. ICP1 (Timer1 input capture), CLKO (clock output), PCINT0. |\n| 15 | PB1 | I/O | Port B bit 1. OC1A PWM, PCINT1. |\n| 16 | PB2 | I/O | Port B bit 2. SS̄ (SPI slave select), OC1B PWM, PCINT2. |\n| 17 | PB3 | I/O | Port B bit 3. MOSI (SPI data in), OC2A PWM, PCINT3. |\n| 18 | PB4 | I/O | Port B bit 4. MISO (SPI data out), PCINT4. |\n| 19 | PB5 | I/O | Port B bit 5. SCK (SPI clock), PCINT5. |\n| 20 | AVCC | Power | ADC supply voltage. Must be within ±0.3 V of VCC; connect through LC filter when ADC is used. |\n| 21 | AREF | Analog | ADC reference voltage input. |\n| 22 | GND | Power | Ground (analog / digital). |\n| 23 | PC0 | I/O | Port C bit 0. ADC0, PCINT8. |\n| 24 | PC1 | I/O | Port C bit 1. ADC1, PCINT9. |\n| 25 | PC2 | I/O | Port C bit 2. ADC2, PCINT10. |\n| 26 | PC3 | I/O | Port C bit 3. ADC3, PCINT11. |\n| 27 | PC4 | I/O | Port C bit 4. ADC4, SDA (TWI data), PCINT12. |\n| 28 | PC5 | I/O | Port C bit 5. ADC5, SCL (TWI clock), PCINT13. |\n\n## Absolute Maximum Ratings\n\n| Parameter | Value | Unit |\n| --- | --- | --- |\n| Operating Temperature | −55 to +125 | °C |\n| Storage Temperature | −65 to +150 | °C |\n| Voltage on any pin (except RESET) w.r.t. GND | −0.5 to V<sub>CC</sub> + 0.5 | V |\n| Voltage on RESET w.r.t. GND | −0.5 to +13.0 | V |\n| Maximum Operating Voltage | 6.0 | V |\n| DC Current per I/O Pin | 40.0 | mA |\n| DC Current V<sub>CC</sub> and GND Pins | 200.0 | mA |\n\nStresses beyond these ratings may cause permanent damage. Exposure to absolute-maximum conditions for extended periods may affect device reliability.\n\n## Recommended Operating Conditions\n\n| Parameter | Min | Typ | Max | Unit |\n| --- | --- | --- | --- | --- |\n| Supply Voltage V<sub>CC</sub> | 1.8 | — | 5.5 | V |\n| Ambient Temperature (industrial) | −40 | — | +85 | °C |\n| Ambient Temperature (extended) | −40 | — | +105 | °C |\n| Clock Frequency @ 1.8 – 2.7 V | 0 | — | 4 | MHz |\n| Clock Frequency @ 2.7 – 4.5 V | 0 | — | 10 | MHz |\n| Clock Frequency @ 4.5 – 5.5 V | 0 | — | 20 | MHz |\n\n## Electrical Characteristics\n\n**ATmega328P DC Characteristics** — T<sub>A</sub> = −40 °C to 85 °C, V<sub>CC</sub> = 1.8 V to 5.5 V (unless otherwise noted).\n\n| Symbol | Parameter | Condition | Typ | Max | Unit |\n| --- | --- | --- | --- | --- | --- |\n| I<sub>CC</sub> | Active Supply Current | 1 MHz, V<sub>CC</sub> = 2 V | 0.3 | 0.5 | mA |\n| I<sub>CC</sub> | Active Supply Current | 4 MHz, V<sub>CC</sub> = 3 V | 1.7 | 2.5 | mA |\n| I<sub>CC</sub> | Active Supply Current | 8 MHz, V<sub>CC</sub> = 5 V | 5.2 | 9 | mA |\n| I<sub>CC</sub> | Idle Supply Current | 1 MHz, V<sub>CC</sub> = 2 V | 0.04 | 0.15 | mA |\n| I<sub>CC</sub> | Idle Supply Current | 4 MHz, V<sub>CC</sub> = 3 V | 0.3 | 0.7 | mA |\n| I<sub>CC</sub> | Idle Supply Current | 8 MHz, V<sub>CC</sub> = 5 V | 1.2 | 2.7 | mA |\n| I<sub>CC</sub> | Power-save — 32 kHz TOSC enabled | V<sub>CC</sub> = 1.8 V | 0.8 | — | µA |\n| I<sub>CC</sub> | Power-save — 32 kHz TOSC enabled | V<sub>CC</sub> = 3 V | 0.9 | — | µA |\n| I<sub>CC</sub> | Power-down — WDT enabled | V<sub>CC</sub> = 3 V | 4.2 | 8 | µA |\n| I<sub>CC</sub> | Power-down — WDT disabled | V<sub>CC</sub> = 3 V | 0.1 | 2 | µA |\n\n**ADC Characteristics (from Table 29-15)**\n\n| Parameter | Min | Typ | Max | Unit |\n| --- | --- | --- | --- | --- |\n| Resolution | — | 10 | — | Bits |\n| Absolute accuracy, ADC clock = 200 kHz (V<sub>REF</sub> = V<sub>CC</sub> = 4 V) | — | 2 | 4.5 | LSB |\n| Integral Non-Linearity (INL) | — | 0.5 | — | LSB |\n| Differential Non-Linearity (DNL) | — | 0.25 | — | LSB |\n| Gain Error | — | 2 | — | LSB |\n| Offset Error | — | 2 | — | LSB |\n| Conversion Time (free-running) | 13 | — | 260 | µs |\n| Clock Frequency | 50 | — | 1000 | kHz |\n| Analog Supply Voltage AV<sub>CC</sub> | V<sub>CC</sub> − 0.3 | — | V<sub>CC</sub> + 0.3 | V |\n| Reference Voltage V<sub>REF</sub> | 1.0 | — | AV<sub>CC</sub> | V |\n| Internal Voltage Reference | 1.0 | 1.1 | 1.2 | V |\n| Analog Input Resistance R<sub>AIN</sub> | — | 100 | — | MΩ |\n\n**Extended Temperature (T<sub>A</sub> = −40 °C to 105 °C).** Active-mode I<sub>CC</sub> typicals are identical to the 85 °C table; max values increase slightly (e.g. power-down max 5 µA instead of 2 µA). See datasheet §30 for the full 105 °C characterization.\n\n## Memory Map\n\nThe ATmega328P has three separate memory spaces: program flash, data SRAM, and EEPROM.\n\n**Program Memory (Flash)** — 32 KB organized as 16K × 16 (16-bit wide instructions). The Program Counter is 14 bits wide. Flash is split into an Application Flash Section and an optional Boot Flash Section; the boot section size is fuse-selectable (256/512/1024/2048 words).\n\n| Region | Start | End | Size |\n| --- | --- | --- | --- |\n| Application Flash Section | 0x0000 | 0x3FFF (or BOOTSZ boundary − 1) | ≤ 32 KB |\n| Boot Flash Section (optional) | BOOTSZ boundary | 0x3FFF | 0.5 – 4 KB |\n\n**Data Memory (SRAM)** — 2 KB of internal SRAM plus the AVR's memory-mapped register file and I/O space.\n\n| Region | Start | End | Size |\n| --- | --- | --- | --- |\n| 32 General-Purpose Registers (R0–R31) | 0x0000 | 0x001F | 32 B |\n| 64 Standard I/O Registers | 0x0020 | 0x005F | 64 B |\n| 160 Extended I/O Registers | 0x0060 | 0x00FF | 160 B |\n| Internal SRAM | 0x0100 | 0x08FF | 2048 B |\n\nOnly `ST/STS/STD` and `LD/LDS/LDD` instructions reach the Extended I/O space (0x60–0xFF); the shorter `IN`/`OUT` opcodes only address the 64 standard I/O registers. SRAM access takes two `clkCPU` cycles. The stack grows downward from `RAMEND` (0x08FF) — user code must initialize the Stack Pointer (SPH:SPL) before any `CALL`/`PUSH`.\n\n**EEPROM** — 1 KB of non-volatile data memory, addressable through the `EEAR`, `EEDR`, and `EECR` registers. Endurance is 100 000 write/erase cycles; typical write time is 3.3 ms. EEPROM retains data for 20 years at 85 °C (100 years at 25 °C).\n\n| Parameter | Value |\n| --- | --- |\n| Flash size | 32 KB (16K × 16) |\n| Flash endurance | 10 000 erase/write cycles |\n| SRAM size | 2 KB |\n| EEPROM size | 1 KB |\n| EEPROM endurance | 100 000 erase/write cycles |\n| EEPROM write time (typ) | 3.3 ms |\n| Data retention | 20 yr @ 85 °C / 100 yr @ 25 °C |\n\n## Interrupt Vectors\n\nThe ATmega328P has 26 interrupt sources with dedicated vectors. Each vector is 2 words (4 bytes) long and typically holds a `jmp` to the handler. The reset vector is always at 0x0000; when the `BOOTRST` fuse is programmed the device jumps instead to the boot reset address. When the `IVSEL` bit in `MCUCR` is set, all interrupt vectors relocate to the start of the boot flash section.\n\n| # | Address | Source | Definition |\n| --- | --- | --- | --- |\n| 1 | 0x0000 | RESET | External pin, power-on reset, brown-out reset, watchdog system reset |\n| 2 | 0x0002 | INT0 | External interrupt request 0 |\n| 3 | 0x0004 | INT1 | External interrupt request 1 |\n| 4 | 0x0006 | PCINT0 | Pin change interrupt request 0 (port B) |\n| 5 | 0x0008 | PCINT1 | Pin change interrupt request 1 (port C) |\n| 6 | 0x000A | PCINT2 | Pin change interrupt request 2 (port D) |\n| 7 | 0x000C | WDT | Watchdog time-out interrupt |\n| 8 | 0x000E | TIMER2_COMPA | Timer/Counter2 compare match A |\n| 9 | 0x0010 | TIMER2_COMPB | Timer/Counter2 compare match B |\n| 10 | 0x0012 | TIMER2_OVF | Timer/Counter2 overflow |\n| 11 | 0x0014 | TIMER1_CAPT | Timer/Counter1 capture event |\n| 12 | 0x0016 | TIMER1_COMPA | Timer/Counter1 compare match A |\n| 13 | 0x0018 | TIMER1_COMPB | Timer/Counter1 compare match B |\n| 14 | 0x001A | TIMER1_OVF | Timer/Counter1 overflow |\n| 15 | 0x001C | TIMER0_COMPA | Timer/Counter0 compare match A |\n| 16 | 0x001E | TIMER0_COMPB | Timer/Counter0 compare match B |\n| 17 | 0x0020 | TIMER0_OVF | Timer/Counter0 overflow |\n| 18 | 0x0022 | SPI_STC | SPI serial transfer complete |\n| 19 | 0x0024 | USART_RX | USART Rx complete |\n| 20 | 0x0026 | USART_UDRE | USART data register empty |\n| 21 | 0x0028 | USART_TX | USART Tx complete |\n| 22 | 0x002A | ADC | ADC conversion complete |\n| 23 | 0x002C | EE_READY | EEPROM ready |\n| 24 | 0x002E | ANALOG_COMP | Analog comparator |\n| 25 | 0x0030 | TWI | 2-wire serial interface |\n| 26 | 0x0032 | SPM_READY | Store program memory ready |\n\nLower vector addresses have higher priority — RESET is highest, SPM_READY lowest. The global interrupt enable is bit 7 (`I`) in `SREG`, set with `sei` and cleared with `cli`.\n\n## Clock System\n\nThe ATmega328P supports six clock sources, selectable via the `CKSEL[3:0]` fuse bits. All clock options feed a common system clock prescaler that divides by 1, 2, 4, ..., 256 under software control (`CLKPR` register).\n\n| CKSEL[3:0] | Clock Source | Typical Frequency |\n| --- | --- | --- |\n| 0000 | External clock (CLKI pin) | 0 – 20 MHz |\n| 0010 | Calibrated internal RC oscillator | 8 MHz (factory-calibrated, ±1 % @ 25 °C / 5 V) |\n| 0011 | Internal 128 kHz RC oscillator | 128 kHz (low-power WDT clock) |\n| 0100–0101 | Low-frequency crystal oscillator | 32.768 kHz (RTC) |\n| 0110–0111 | Full-swing crystal oscillator | 0.4 – 20 MHz |\n| 1000–1111 | Low-power crystal oscillator | 0.4 – 16 MHz |\n\nThe default fuse setting ships the device running on the internal 8 MHz RC oscillator with a ÷8 prescaler → 1 MHz system clock. Writing `CLKPR = 0` selects the full 8 MHz. Switching to an external 16 MHz crystal requires reprogramming `CKSEL[3:0]` and `SUT[1:0]` fuses (Arduino bootloaders do this automatically).\n\n## Peripherals Overview\n\n| Peripheral | Count | Key Features |\n| --- | --- | --- |\n| Timer/Counter0 | 1 | 8-bit, PWM (OC0A/OC0B), external clock T0 |\n| Timer/Counter1 | 1 | 16-bit, PWM (OC1A/OC1B), input capture (ICP1) |\n| Timer/Counter2 | 1 | 8-bit, async (TOSC crystal), PWM (OC2A/OC2B) |\n| USART | 1 | Full-duplex, MSPIM mode, auto-baud |\n| SPI | 1 | Master/slave, 4 modes, up to f<sub>CPU</sub>/2 |\n| TWI (I²C) | 1 | Multi-master, 7/10-bit addressing, up to 400 kHz |\n| ADC | 1 | 10-bit, 8 channels (TQFP) / 6 channels (SPDIP), 13 – 260 µs conv. |\n| Analog Comparator | 1 | Bandgap reference, input-capture trigger |\n| Watchdog Timer | 1 | 16 ms – 8 s, interrupt + reset modes |\n| External Interrupts | 2 | INT0, INT1 (edge/level) |\n| Pin Change Interrupts | 24 | PCINT0–PCINT23 across PORTB/C/D |\n\n## Packages\n\n| Code | Package | Size | Lead Pitch |\n| --- | --- | --- | --- |\n| 28P3 | 28-lead Plastic Dual Inline (SPDIP), 0.300″ wide | 28 × 0.300″ | 2.54 mm |\n| 32A | 32-lead Thin Quad Flat Pack (TQFP), 1.0 mm body | 7 × 7 × 1.0 mm | 0.80 mm BSC |\n| 28M1 | 28-pad Very Thin Quad Flat No-Lead (VQFN) | 4 × 4 × 1.0 mm | 0.45 mm |\n| 32M1-A | 32-pad Thin Quad Flat No-Lead (VQFN, S4B) | 5 × 5 × 1.0 mm | 0.50 mm |\n\n### Ordering Codes (ATmega328P)\n\n| Code | Package | Temp Range |\n| --- | --- | --- |\n| ATmega328P-AU / -AUR | 32A (TQFP) | −40 °C to 85 °C |\n| ATmega328P-MMH / -MMHR | 28M1 (VQFN) | −40 °C to 85 °C |\n| ATmega328P-MU / -MUR | 32M1-A (VQFN) | −40 °C to 85 °C |\n| ATmega328P-PU | 28P3 (SPDIP) | −40 °C to 85 °C |\n| ATmega328P-AN / -ANR | 32A (TQFP) | −40 °C to 105 °C |\n| ATmega328P-MN / -MNR | 32M1-A (VQFN) | −40 °C to 105 °C |\n| ATmega328P-PN | 28P3 (SPDIP) | −40 °C to 105 °C |\n\nSuffix `R` = tape & reel. Suffix `N` = extended (105 °C) temperature grade. `MMH` leadframe uses NiPdAu finish.\n\n## Applications\n\n- Arduino Uno, Nano, Pro Mini, and compatible development boards\n- Hobby and educational microcontroller projects\n- Low-power sensor nodes and battery-operated devices (thanks to 0.1 µA power-down)\n- Motor control, lighting, and simple industrial automation\n- USB-to-serial gadgets, LED controllers, data loggers\n- Safety-critical timing with programmable watchdog + brown-out detection\n\n## Key Formulas\n\n### Speed vs. Supply Voltage\n\nThe maximum CPU clock frequency scales linearly with V<sub>CC</sub>:\n\n$$f_{CLK,\\,max} = \\begin{cases} 4\\ \\text{MHz} & 1.8\\ \\text{V} \\le V_{CC} \\le 2.7\\ \\text{V} \\\\ 10\\ \\text{MHz} & 2.7\\ \\text{V} \\le V_{CC} \\le 4.5\\ \\text{V} \\\\ 20\\ \\text{MHz} & 4.5\\ \\text{V} \\le V_{CC} \\le 5.5\\ \\text{V} \\end{cases}$$\n\n### I/O Switching Current Estimate\n\nCurrent drawn on a capacitively-loaded pin is approximately:\n\n$$I_{pin} \\approx C_L \\cdot V_{CC} \\cdot f$$\n\nwhere $C_L$ is load capacitance, $V_{CC}$ is operating voltage, and $f$ is the average switching frequency of the pin.\n",+  "metadata": {+    "specs": {+      "Core": "8-bit AVR RISC",+      "Flash": "32 KB (self-programming)",+      "SRAM": "2 KB",+      "EEPROM": "1 KB",+      "Max clock": "20 MHz",+      "GPIO": "23 (ports B/C/D)",+      "ADC": "6-channel 10-bit (DIP)",+      "Serial": "USART + SPI + I2C (TWI)",+      "Timers": "3 (2x 8-bit, 1x 16-bit) with PWM",+      "Supply voltage": "1.8-5.5 V",+      "Package": "PDIP-28 (SPDIP)"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "atmega328p",+    "atmega328",+    "arduino uno chip",+    "8-bit avr",+    "avr microcontroller"+  ],+  "discovery_pitch": "ATmega328P 8-bit AVR microcontroller (28-pin DIP, the Arduino Uno chip) with datasheet-verified pinout, KiCad symbol/footprint/3D, and full provenance.",   "author": {-    "name": "Kyle Bergstedt",-    "email": "[email protected]"+    "name": "Ray",+    "email": "[email protected]"   },-  "visibility": "public",+  "dependencies": {},   "hero": {     "type": "image",     "path": "docs/hero.png"   },-  "sample_prompts": [],-  "discovery_triggers": [],-  "discovery_pitch": null,-  "metadata": {},-  "created_at": "2026-05-28T05:36:47.222Z",-  "updated_at": "2026-05-28T05:36:47.222Z",-  "description": "Microchip 8-bit AVR MCU, 28-pin DIP. 32 KB flash, 2 KB SRAM, 20 MHz, the Arduino Uno chip. Datasheet-verified.",-  "dependencies": {},   "files": [     "page.json",     "README.md",