AS5600-ASOM from AMS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VDD5V	power_in	Positive voltage supply in 5V mode (4.5-5.5 V). Requires a 100 nF decoupling capacitor. When operating in 3.3V mode this pin is fed via VDD3V3's LDO output.
2	VDD3V3	power_in	Positive voltage supply in 3.3V mode (3.0-3.6 V). In 5V mode this pin is the output of the internal 3.3 V LDO and requires an external 1 µF decoupling capacitor.
3	OUT	output	Analog (ratiometric to VDD, 12-bit DAC) or PWM digital angle output. Output selection is configured via OTP/registers. Drive capability ±0.5 mA typ, capacitive load up to 1 nF.
4	GND	power_in	Device ground reference.
5	PGO	input	Program option pin. Internal pull-up; tying to GND selects Programming Option B for the OTP burn procedure.
6	SDA	bidirectional	I2C serial data line. Open-drain; requires an external pull-up resistor to VDD.
7	SCL	input	I2C serial clock line. Requires an external pull-up resistor to VDD.
8	DIR	input	Direction polarity select. Tie to GND for clockwise-increasing output values, or tie to VDD for counterclockwise-increasing values. Must not be left floating.

Key specifications

Parameter	Value
Manufacturer	AMS
Package	SOIC-8
Category	Sensor
Pins	8

Ordering variants

AS5600-ASOM
AS5600-ASOMASOT

CAD (KiCad official)

Symbol: AS5600-ASOM
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`as5600-asom.step`	122 KB	You want the bare part, or you mark your own boards.
`as5600-asom-etched.step`	2.4 MB	You want the part with `AS5600-ASOM` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 588 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: AMS datasheet (43 pp, sha256 65b66abb023ddd28, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF