AP7365-WG-7
Public Unreviewedby Ray
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownAP7365-WG-7
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25
AP7365-WG-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Voltage input pin (2V to 6V, 6.5V abs max). Bypass to ground through at least 1µF MLCC capacitor placed close to the pin. |
| 2 | GND | power_in | Ground reference for the regulator. Connect directly to the system ground plane. |
| 3 | EN | input | Enable input, active high. VIH ≥ 1.4V enables the regulator; VIL ≤ 0.4V shuts it down. Do not leave floating. Abs max VIN+0.3V. |
| 4 | NC | unconnected | No connection. Pin is not internally bonded on the SOT25 fixed-output (W package) variant; can be left floating or tied to GND. |
| 5 | OUT | power_out | Regulated voltage output pin (fixed: 0.8V-3.9V options, e.g. 3.3V for -33 suffix). Bypass to ground through a 1µF MLCC capacitor for stability. Rated up to 600mA continuous. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
AP7365-WG-7AP7365-WG-7WAP7365-WG-7SNAP7365-WG-7YAP7365-WG-7YRAP7365-WG-7EAP7365-WG-7ERAP7365-WG-7EV
CAD (KiCad official)
- Symbol:
AP7365-WG-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
ap7365-wg-7.step |
85 KB | You want the bare part, or you mark your own boards. |
ap7365-wg-7-etched.step |
1.8 MB | You want the part with AP7365-WG-7 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 443 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (18 pp, sha256
7ec2b65a0dbeaec0, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).