AP7361-10D-13
Public Unreviewedby Ray
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownAP7361-10D-13
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252
AP7361-10D-13 from Diodes Incorporated, in a TO-252. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Regulator input supply, 2.2V to 6V. Bypass to GND with at least a 1uF ceramic capacitor placed close to the pin. Absolute max VIN = 6.5V. |
| 2 | GND | power_in | Device ground reference. Also the thermal path in TO-252 (D-PAK); connect the tab to a copper pour for heatsinking (theta_JA ~= 95 C/W). |
| 3 | OUT | power_out | Regulated 1.0V output (fixed, -10 option), up to 1A. Bypass to GND with at least a 2.2uF ceramic capacitor; a larger cap (e.g. 4.7uF) improves AC load response. Current-limited to ~1.1-1.5A; short-circuit current clamps at ~200mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TO-252 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
AP7361-10D-13AP7361-10D-13AP7361-10DR-13AP7361-10D-13AP7361-10E-13AP7361-10D-13AP7361-10ER-13AP7361-10D-13AP7361-10Y-13AP7361-10D-13AP7361-10FGE-7AP7361-10D-13AP7361-10SP-13
CAD (KiCad official)
- Symbol:
AP7361-10D-13 - Footprint:
Package_TO_SOT_SMD:TO-252-2 - 3D model: TO-252 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
ap7361-10d-13.step |
119 KB | You want the bare part, or you mark your own boards. |
ap7361-10d-13-etched.step |
1.8 MB | You want the part with AP7361-10D-13 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 485 faces against 83 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (22 pp, sha256
fd84e397b31647d7, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).