AP22814AW5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT	power_out	Voltage output pin of the internal high-side power switch. Connect a 0.1 uF bypass capacitor and a high-value bulk capacitor to GND close to the IC (at least 10 uF for USB applications). Sourced from IN through a typical 50 mOhm RDS(on) switch.
2	GND	power_in	Ground reference pin for the device circuitry.
3	FLG	output	Over-current and over-temperature fault report. Open-drain output, active low when a fault is triggered, with 6 ms typical blanking time (tBLANK). Requires an external pull-up resistor (e.g. 10 kOhm). FLG FET on-resistance ~40 Ohm typical at IFLG = 10 mA.
4	EN	input	Enable input. For the 'A' suffix (AP22814A) this pin is active high: drive above VIH = 1.5 V (min) to enable the switch, below VIL = 0.5 V (max) to disable. Enable input leakage typical 0.01 uA.
5	IN	power_in	Voltage input pin, 2.7 V to 5.5 V operating range. Connect a 1 uF low-ESR bypass capacitor to GND close to the IC. Supplies the load-switch MOSFET and internal control circuitry.

Key specifications

Parameter	Value
Manufacturer	Diodes Incorporated
Package	SOT-25
Category	PMIC
Pins	5

Ordering variants

AP22814AW5-7
AP22814AW5-7BW5-7
AP22814AW5-7AMTR
AP22814AW5-7BMTR
AP22814AW5-7AFDC
AP22814AW5-7BFDC

CAD (KiCad official)

Symbol: AP22814AW5-7
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-25 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`ap22814aw5-7.step`	85 KB	You want the bare part, or you mark your own boards.
`ap22814aw5-7-etched.step`	1.9 MB	You want the part with `AP22814AW5-7` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 493 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Diodes Incorporated datasheet (19 pp, sha256 45b429844781ddbe, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF