AP22804BW5-7
Public Unreviewedby Ray
Diodes Incorporated AC-DC Controllers and Regulators, SOT-25-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownAP22804BW5-7
Diodes Incorporated · AC-DC Controllers and Regulators · SOT-25-5
AP22804BW5-7 from Diodes Incorporated, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Switched voltage output. Connect a 0.1 uF bypass capacitor and a high-value bulk capacitor (at least 10 uF for USB) close to the pin. Output is discharged through an internal FET when disabled. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | FLG | output | Open-drain fault flag output, asserted low when an over-current or over-temperature condition is detected. Blanking time typically 6 ms (2-13 ms). Requires an external pull-up resistor (e.g. 10k). FLG FET on-resistance ~40 Ohm. |
| 4 | EN | input | Enable input. For the 'B' suffix variant (AP22804BW5) this pin is ACTIVE LOW: drive low to turn the switch on, high to turn off. VIL max 0.65V, VIH min 1.5V. EN input leakage <= 1 uA. |
| 5 | IN | power_in | Voltage input pin, 2.7V to 5.5V. Connect a 1 uF low-ESR ceramic capacitor to GND close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
AP22804BW5-7AP22804AW5-7AP22814BW5-7AP22814AW5-7AP22804BW5-7MP-8AP22804BW5-7MTRAP22804BW5-7FDC
CAD (KiCad official)
- Symbol:
AP22804BW5-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25-5 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
ap22804bw5-7.step |
85 KB | You want the bare part, or you mark your own boards. |
ap22804bw5-7-etched.step |
2.3 MB | You want the part with AP22804BW5-7 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 552 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (19 pp, sha256
ecedef9e2bb35265, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).