AOZ1360AIL from Alpha Omega Semicon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	IN	power_in	P-channel MOSFET source / input supply. Operating range 5.5 V to 28 V. Connect a 1 µF capacitor from IN to GND. Tied to pin 2 (both IN pins connected internally).
2	IN	power_in	P-channel MOSFET source / input supply. Operating range 5.5 V to 28 V. Connect a 1 µF capacitor from IN to GND. Tied to pin 1 (both IN pins connected internally).
3	GND	power_in	Device ground reference.
4	SS	input	Soft-Start pin. Connect a capacitor from SS to GND to program the soft-start time. Tie SS to IN to use the internal default soft-start time of ~100 µs.
5	EN	input	Enable input. Active-high logic input (VIH ≥ 2.0 V, VIL ≤ 0.8 V, ~100 mV hysteresis). Pulls the switch on when high; shutdown current <1 µA when tied to GND.
6	SET	input	Current-limit set pin. Connect a resistor from SET to GND to program the switch current limit (e.g. RSET = 84.5 kΩ → ILIM ≈ 2.7 A typ).
7	OUT	power_out	P-channel MOSFET drain / switched output. Connect a ≥0.1 µF capacitor from OUT to GND. Tied to pin 8 (both OUT pins connected internally).
8	OUT	power_out	P-channel MOSFET drain / switched output. Connect a ≥0.1 µF capacitor from OUT to GND. Tied to pin 7 (both OUT pins connected internally).

Key specifications

Parameter	Value
Manufacturer	Alpha Omega Semicon
Package	SOIC-8
Category	PMIC
Pins	8

Ordering variants

Same part, different packaging or reel option.

AOZ1360AIL
AOZ1360AILDIL

CAD (KiCad official)

Symbol: AOZ1360AIL
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`aoz1360ail.step`	122 KB	You want the bare part, or you mark your own boards.
`aoz1360ail-etched.step`	1.9 MB	You want the part with `AOZ1360AIL` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 479 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Alpha Omega Semicon datasheet (16 pp, sha256 7fb028765996d4dc, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF