AMC1200SDUBR from Texas Instruments, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VDD1	power_in	High-side power supply. Operating range 4.5 V to 5.5 V (typ 5.0 V). Typical high-side supply current 5.4 mA, max 8 mA. Absolute max VDD1 to GND1 is -0.5 V to 6 V.
2	VINP	input	Noninverting analog input. Differential input range VINP - VINN = ±250 mV (max ±320 mV before clipping). Common-mode range -0.16 V to VDD1. Input capacitance to GND1 ~3 pF.
3	VINN	input	Inverting analog input. Paired with VINP as the differential shunt-sense input (±250 mV nominal). Differential input resistance ~28 kΩ, differential input capacitance ~3.6 pF.
4	GND1	power_in	High-side analog ground. Reference for VDD1, VINP, and VINN on the isolated (shunt) side of the barrier.
5	GND2	power_in	Low-side analog ground. Reference for VDD2, VOUTP, and VOUTN on the controller side of the isolation barrier.
6	VOUTN	output	Inverting analog output. Fully-differential output pair with VOUTP; nominal gain 8 V/V. Output common-mode is auto-set to ~1.29 V (3.3 V supply) or ~2.55 V (5 V supply). Output resistance ~2.5 Ω, short-circuit current ~20 mA.
7	VOUTP	output	Noninverting analog output. Differential swing ~±2 V around the output common-mode voltage. Paired with VOUTN.
8	VDD2	power_in	Low-side power supply. Operating range 2.7 V to 5.5 V (typ 3.3 V or 5.0 V). Typical low-side supply current 3.8 mA (3.3 V) to 4.4 mA (5 V), max 6-7 mA.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOP-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

AMC1200SDUBR
AMC1200SDUBRDWVR
AMC1200SDUBRDWV

CAD (KiCad official)

Symbol: AMC1200SDUBR
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`amc1200sdubr.step`	122 KB	You want the bare part, or you mark your own boards.
`amc1200sdubr-etched.step`	2.7 MB	You want the part with `AMC1200SDUBR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 648 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (27 pp, sha256 516726fd3a6b0f09, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF