component

ADA4807-1

Public Unreviewed

by Ray

ADI low-noise rail-to-rail op-amp, SOT-23-6. 180 MHz, 3.1 nV/rtHz, single supply 2.7-10 V, with disable. Datasheet-verified.

componentamplifierop-amplow-noiserail-to-railsot-23-6analog-devices
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

ADA4807

Analog Devices · Operational amplifier · SOT-23-6

Single low-noise op-amp with a 180 MHz gain-bandwidth and 3.1 nV/rtHz input noise, in a SOT-23-6. Rail-to-rail output and a wide 2.7 to 10 V supply suit it to buffering ADC drivers and low-level sensor front ends, and a dedicated disable pin drops supply current for power-sensitive designs. A 225 V/us slew rate handles fast edges. The single of the ADA4807 family (dual -2, quad -4).

Pinout

Pin Name Type Function
1 VOUT output Amplifier output. Rail-to-rail output stage; saturated swing typically within ~40 mV of each rail with RLOAD = 1 kOhm. Linear output current ~50 mA sourcing / 60 mA sinking.
2 -VS power_in Negative supply. Connect to ground for single-supply operation or to the negative rail for dual-supply operation. Total supply range 2.7 V to 11 V (+VS - -VS).
3 +IN input Noninverting analog input. Rail-to-rail input common-mode range from -VS - 0.2 V to +VS + 0.2 V. Input bias current typically -1.2 uA, differential input resistance 35 kOhm.
4 -IN input Inverting analog input. Used with external feedback network to set closed-loop gain. Same input characteristics as +IN; keep absolute differential voltage below +/-1.4 V (per absolute maximum ratings).
5 DISABLE input Active-low power-down input. Logic low (<1.3 V) disables the amplifier (quiescent current drops to ~2.4 uA); logic high (>1.7 V) enables normal operation. Disable on time ~1.3 us, off time ~270 ns at +/-5 V.
6 +VS power_in Positive supply. Fully specified at +3 V, +5 V, and +/-5 V; operating range 2.7 V to 11 V total (+VS relative to -VS). PSRR typically 107 dB (positive) and 120 dB (negative).

Key specifications

Parameter Value
Type Low-noise rail-to-rail op-amp
Gain-bandwidth 180 MHz
Input voltage noise 3.1 nV/rtHz
Slew rate 225 V/us
Supply 2.7-10 V
Output Rail-to-rail
Disable Yes (pin 5)
Package SOT-23-6

Ordering variants

  • ADA4807-1ARJZ (SOT-23-6, tape & reel)

CAD (KiCad official)

  • Symbol: Amplifier_Operational:ADA4807-1 (KiCad official)
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (33 pp, sha256 8f615c78af71a04a, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF