ADA4692-4ARUZ from UMW, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT A	output	Output of amplifier A. Rail-to-rail output stage; drives loads down to 600 Ω. Short-circuit current ±15 mA (2.7 V supply) / ±55 mA (5 V supply).
2	-IN A	input	Inverting input of amplifier A. Very low input bias current (0.5 pA typical); input voltage range extends from V- to within ~1.4 V of V+.
3	+IN A	input	Non-inverting input of amplifier A. Very low input bias current (0.5 pA typical); input voltage range extends from V- to within ~1.4 V of V+.
4	V+	power_in	Positive supply pin. 2.7 V to 5 V single supply or up to +2.5 V for dual-supply operation. Absolute maximum total supply voltage 6 V. Bypass with local decoupling capacitor to V-.
5	+IN B	input	Non-inverting input of amplifier B. Very low input bias current (0.5 pA typical).
6	-IN B	input	Inverting input of amplifier B. Very low input bias current (0.5 pA typical).
7	OUT B	output	Output of amplifier B. Rail-to-rail output stage.
8	OUT C	output	Output of amplifier C. Rail-to-rail output stage.
9	-IN C	input	Inverting input of amplifier C. Very low input bias current (0.5 pA typical).
10	+IN C	input	Non-inverting input of amplifier C. Very low input bias current (0.5 pA typical).
11	V-	power_in	Negative supply / ground pin. Connect to GND for single-supply operation or to a negative rail (down to -2.5 V) for dual-supply operation. Absolute maximum total supply voltage 6 V.
12	+IN D	input	Non-inverting input of amplifier D. Very low input bias current (0.5 pA typical).
13	-IN D	input	Inverting input of amplifier D. Very low input bias current (0.5 pA typical).
14	OUT D	output	Output of amplifier D. Rail-to-rail output stage.

Key specifications

Parameter	Value
Manufacturer	UMW
Package	TSSOP-14
Category	Op-amp/Cmp
Pins	14

Ordering variants

ADA4692-4ARUZ
ADA4692-4ARUZRU-14
ADA4692-4ARUZR-8

CAD (KiCad official)

Symbol: ADA4692-4ARUZ
Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
3D model: TSSOP-14 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`ada4692-4aruz.step`	194 KB	You want the bare part, or you mark your own boards.
`ada4692-4aruz-etched.step`	2.6 MB	You want the part with `ADA4692-4ARUZ` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 667 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: UMW datasheet (20 pp, sha256 aee95e44814abb06, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF