AD8619ARZ from UMW, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT A	output	Op-amp A output. Rail-to-rail CMOS output; short-circuit current ±80 mA typical; closed-loop output impedance ~15 Ω at 10 kHz.
2	-IN A	input	Inverting input of op-amp A. Rail-to-rail input; V_IN range VSS−0.3 V to VDD+0.3 V; input bias current 1 pA max at 25 °C.
3	+IN A	input	Non-inverting input of op-amp A. Rail-to-rail input; input bias current 1 pA max at 25 °C; differential input voltage rated ±6 V.
4	V+	power_in	Positive supply pin (VDD). Single-supply 1.8 V to 5.5 V, or dual-supply ±0.9 V to ±2.5 V. Absolute maximum 6 V across V+ to V−.
5	+IN B	input	Non-inverting input of op-amp B. Rail-to-rail input; input bias current 1 pA max at 25 °C.
6	-IN B	input	Inverting input of op-amp B. Rail-to-rail input; input bias current 1 pA max at 25 °C.
7	OUT B	output	Op-amp B output. Rail-to-rail CMOS output; short-circuit current ±80 mA typical.
8	OUT C	output	Op-amp C output. Rail-to-rail CMOS output; short-circuit current ±80 mA typical.
9	-IN C	input	Inverting input of op-amp C. Rail-to-rail input; input bias current 1 pA max at 25 °C.
10	+IN C	input	Non-inverting input of op-amp C. Rail-to-rail input; input bias current 1 pA max at 25 °C.
11	V-	power_in	Negative supply pin (VSS). Tied to GND for single-supply operation; may be driven to −2.5 V for dual-supply operation. Absolute maximum 6 V across V+ to V−.
12	+IN D	input	Non-inverting input of op-amp D. Rail-to-rail input; input bias current 1 pA max at 25 °C.
13	-IN D	input	Inverting input of op-amp D. Rail-to-rail input; input bias current 1 pA max at 25 °C.
14	OUT D	output	Op-amp D output. Rail-to-rail CMOS output; short-circuit current ±80 mA typical.

Key specifications

Parameter	Value
Manufacturer	UMW
Package	SOP-14
Category	Op-amp/Cmp
Pins	14

Ordering variants

AD8619ARZ
AD8619ARZARUZ

CAD (KiCad official)

Symbol: AD8619ARZ
Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
3D model: SOP-14 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`ad8619arz.step`	195 KB	You want the bare part, or you mark your own boards.
`ad8619arz-etched.step`	2.3 MB	You want the part with `AD8619ARZ` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 568 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: UMW datasheet (19 pp, sha256 f88d493468a63f28, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF