8002A from IDCHIP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	SD	input	Shutdown control input. Logic HIGH (VIH = 1.5V to VDD) disables the amplifier and puts the chip into low-power mode (~10μA typical, 16μA max); logic LOW (VIL = 0 to 1V) enables normal operation. Pin is high-impedance internally with no pull-up/pull-down - must not be left floating (tie to GND if unused).
2	BYP	passive	Bypass pin - internal VDD/2 mid-supply reference output. Connect a bypass capacitor (typ. 1μF) from this pin to GND to filter the mid-rail reference and improve PSRR and low-frequency THD+N.
3	NC	unconnected	No connection. Datasheet features list explicitly states '芯片第3脚无功能' (Pin 3 has no function). Leave unconnected on the PCB.
4	INN	input	Inverting analog audio input to the input op-amp stage. Closed-loop gain of the first stage is set by external Rf (feedback) and Ri (input) resistors; overall differential BTL gain AVD = 2*(Rf/Ri). AC-couple the source through Ci (typ. 0.39μF) which forms a high-pass filter with Ri (fC = 1/(2πRiCi)).
5	VO1	output	Analog audio output 1 (one side of the bridge-tied-load speaker output). Biased at VDD/2 mid-rail; drives one terminal of the 4Ω or 8Ω speaker directly with no output coupling capacitor required. Signal is 180° out of phase with VO2.
6	VDD	power_in	Positive supply input. Recommended operating range 2.0V to 5.5V (absolute max 6V). Quiescent supply current IDD ≈ 15mA (no load, VDD=5V). Decouple with 10μF and 0.1μF capacitors placed close to the pin.
7	GND	power_in	Power ground / analog ground return for the amplifier.
8	VO2	output	Analog audio output 2 (other side of the bridge-tied-load speaker output). Biased at VDD/2 mid-rail; the internal second-stage op-amp is fixed at unity inverting gain via two internal 20kΩ resistors, so VO2 is 180° out of phase with VO1. Connect the speaker directly between VO1 and VO2.

Key specifications

Parameter	Value
Manufacturer	IDCHIP
Package	SOP-8
Category	Op-amp/Cmp
Pins	8

CAD (KiCad official)

Symbol: 8002A
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`8002a.step`	122 KB	You want the bare part, or you mark your own boards.
`8002a-etched.step`	1.6 MB	You want the part with `8002A` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 381 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: IDCHIP datasheet (6 pp, sha256 55ff9c66b091ae2e, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF