component
74LVC1G14SE-7
Public Unreviewedby Ray
Diodes Incorporated Inverters, SOT-353. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdown74LVC1G14SE-7
Diodes Incorporated · Inverters · SOT-353
74LVC1G14SE-7 from Diodes Incorporated, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. May be left floating or tied to any potential without affecting device operation. |
| 2 | A | input | Schmitt-trigger data input. Accepts signals up to 5.5 V regardless of VCC. Typical hysteresis (VT+ - VT-) is ~0.35 V at VCC = 3 V; VT+ ranges 1.50-2.00 V and VT- ranges 0.80-1.30 V at VCC = 3 V. Input current II is ±5 µA max. |
| 3 | GND | power_in | Device ground reference (0 V). Continuous current through GND is limited to ±100 mA absolute maximum. |
| 4 | Y | output | Push-pull inverting data output (Y = /A). Drive capability is ±24 mA at VCC = 3 V; continuous output current IO is limited to ±50 mA absolute maximum. High-impedance and IOFF-isolated when VCC is powered down. |
| 5 | VCC | power_in | Supply voltage input. Recommended operating range 1.65 V to 5.5 V (1.5 V min for data retention only). Absolute maximum -0.5 V to 6.5 V. Typical ICC is 10 µA max at TA ≤ 85 °C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-353 |
| Category | Logic |
| Pins | 5 |
Ordering variants
74LVC1G14SE-774LVC1G14SE-7W574LVC1G14SE-7Z74LVC1G14SE-7FS374LVC1G14SE-7FW574LVC1G14SE-7FW474LVC1G14SE-7FX474LVC1G14SE-7FZ4
CAD (KiCad official)
- Symbol:
74LVC1G14SE-7 - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SOT-353 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
74lvc1g14se-7.step |
87 KB | You want the bare part, or you mark your own boards. |
74lvc1g14se-7-etched.step |
1.7 MB | You want the part with 74LVC1G14SE-7 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 455 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (17 pp, sha256
5406f60228dc48bb, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).