74LVC1G04GW from Nexperia, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	NC	unconnected	Not connected. Leave floating or tie to a static level; no internal bond.
2	A	input	Data input to the inverter, with Schmitt-trigger action. Overvoltage tolerant up to 5.5 V independent of VCC. VIH = 0.65 x VCC (VCC = 1.65-1.95 V) up to 0.7 x VCC (VCC = 4.5-5.5 V); VIL correspondingly 0.35 x VCC down to 0.3 x VCC. Input leakage +/-1 uA max.
3	GND	power_in	Ground reference (0 V). Absolute max ground current -100 mA.
4	Y	output	Inverted CMOS output (Y = NOT A). Drive strength +/-24 mA at VCC = 3.0 V; VOH = VCC - 0.1 V at IO = -100 uA; VOL <= 0.55 V at IO = 24 mA (VCC = 3.0 V). Latch-up performance exceeds 250 mA.
5	VCC	power_in	Supply voltage. Recommended operating range 1.65 V to 5.5 V (absolute max -0.5 V to +6.5 V). Supply current ICC = 4 uA max at 25 C, quiescent.

Key specifications

Parameter	Value
Manufacturer	Nexperia
Package	SOT-353
Category	Logic
Pins	5

Ordering variants

74LVC1G04GW
74LVC1G04GWGV
74LVC1G04GWGM
74LVC1G04GWGN
74LVC1G04GWGS
74LVC1G04GWGX
74LVC1G04GWGX4
74LVC1G04GWGZ

CAD (KiCad official)

Symbol: 74LVC1G04GW
Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
3D model: SOT-353 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`74lvc1g04gw.step`	87 KB	You want the bare part, or you mark your own boards.
`74lvc1g04gw-etched.step`	1.7 MB	You want the part with `74LVC1G04GW` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 447 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Nexperia datasheet (19 pp, sha256 56117b1a94029f94, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF