74HC14PW from Nexperia, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	1A	input	Schmitt-trigger data input to inverter channel 1. Input voltage range 0 V to VCC (VCC = 2.0 V to 6.0 V). Input clamp diodes permit series-resistor interfacing above VCC.
2	1Y	output	Inverted CMOS output of Schmitt-trigger channel 1. Push-pull drive; typ. IO = ±5.2 mA at VCC = 6.0 V.
3	2A	input	Schmitt-trigger data input to inverter channel 2. Input voltage range 0 V to VCC.
4	2Y	output	Inverted CMOS output of Schmitt-trigger channel 2. Push-pull drive.
5	3A	input	Schmitt-trigger data input to inverter channel 3. Input voltage range 0 V to VCC.
6	3Y	output	Inverted CMOS output of Schmitt-trigger channel 3. Push-pull drive.
7	GND	power_in	Ground reference (0 V).
8	4Y	output	Inverted CMOS output of Schmitt-trigger channel 4. Push-pull drive.
9	4A	input	Schmitt-trigger data input to inverter channel 4. Input voltage range 0 V to VCC.
10	5Y	output	Inverted CMOS output of Schmitt-trigger channel 5. Push-pull drive.
11	5A	input	Schmitt-trigger data input to inverter channel 5. Input voltage range 0 V to VCC.
12	6Y	output	Inverted CMOS output of Schmitt-trigger channel 6. Push-pull drive.
13	6A	input	Schmitt-trigger data input to inverter channel 6. Input voltage range 0 V to VCC.
14	VCC	power_in	Positive supply voltage. Recommended VCC = 2.0 V to 6.0 V (74HC14). Absolute maximum -0.5 V to +7 V.

Key specifications

Parameter	Value
Manufacturer	Nexperia
Package	TSSOP-14
Category	Logic
Pins	14

Ordering variants

74HC14PW
74HC14PWD
74HC14PWBQ

CAD (KiCad official)

Symbol: 74HC14PW
Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
3D model: TSSOP-14 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`74hc14pw.step`	194 KB	You want the bare part, or you mark your own boards.
`74hc14pw-etched.step`	1.7 MB	You want the part with `74HC14PW` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 446 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Nexperia datasheet (16 pp, sha256 ab7028cdd8c5ce85, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF