OCuLink Riser for the Supermicro AIOM Slot

@@ -13,6 +13,7 @@ The whole build, filmed off the screen while Claude worked in Adom Hydrogen, cut | [7. Placement and the routing gate](#7-placement-and-the-routing-gate) | 4:46 to 5:33 | 47 parts landed live one at a time, the routing gate, tracks landing | | [8. Routing lands live](#8-routing-lands-live) | 5:33 to 6:19 | 169 traces landed one at a time in KiCad, all accepted | | [9. Pours, outline and the current check](#9-pours-outline-and-the-current-check) | 6:20 to 7:06 | Routing done, pours landed and measured, the field-solved current check |+| [10. Debugging the field solver](#10-debugging-the-field-solver) | 7:06 to 7:53 | The board waits in KiCad while Claude finds why the current solve will not converge |  ## 1. The request and the research @@ -118,3 +119,13 @@ The whole build, filmed off the screen while Claude worked in Adom Hydrogen, cut - Heatsink vias: none needed, nothing on this passive card dissipates real power. The pours land and the filled copper is measured on all six layers. - The outline corners were already rounded by the generator. - The current check needs a real field solve of the board's copper, so adom-fields runs on the saved board. Early answers are refused (a stale report, current injected at every pad) until the spec carries the real +12 V path from the edge fingers to the loads.++## 10. Debugging the field solver++<video controls preload="metadata" width="1080" poster="clips/clip-10-poster.jpg" src="clips/clip-10.mp4"></video>++[Download clip 10](clips/clip-10.mp4) (2 min 53 s, 16x, narrated)++- The board stays on screen in KiCad; the work is in the chat behind it.+- The field solver will not converge on the +3.3 V net, so Claude instruments the solver's own source: it drops floating copper islands from the DC solve and checks for current injected into unconnected cells.+- From clip 11 on, the chat window is filmed as well.

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯