OCuLink Riser for the Supermicro AIOM Slot

@@ -1,6 +1,6 @@ # AI Flow run: claude on board-0 -**Running**: step `models`, 40.8 min of AI time since the prompt (265.6 min on the wall clock). This page updates at every step change.+**Running**: step `test-plan`, 47.1 min of AI time since the prompt (271.9 min on the wall clock). This page updates at every step change.  Prompt at 2026-10-12T21:19:30Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-10-12T21:19:30Z | (open) | 40.8 | 225 | the first prompt |-| **all** | | | **40.8** | | |+| 1 | 2026-10-12T21:19:30Z | (open) | 47.0 | 225 | the first prompt |+| **all** | | | **47.1** | | |  ## Per step @@ -22,14 +22,16 @@ AI time only, the idle cut out. | intake | 24.4 | 24.4 | 0.0 | 2 | 1 | 0 | 23.9 min | | components | 10.8 | 7.5 | 3.3 | 9 | 1 | 0 | 6.0 min | | libraries | 4.6 | 4.6 | 0.1 | 1 | 1 | 0 | 4.6 min |-| models | 0.6 | 0.0 | 0.6 | 1 | 1 | 0 | 0.0 min |+| models | 6.2 | 3.4 | 2.8 | 6 | 1 | 0 | 2.0 min | | rules | 0.3 | 0.3 | 0.0 | 7 | 1 | 0 | 0.2 min |-| **total** | **40.8** | **36.8** | **4.0** | | | | |+| test-plan | 0.7 | 0.0 | 0.7 | 1 | 1 | 0 | 0.0 min |+| **total** | **47.0** | **40.2** | **6.8** | | | | |  ## Decisions along the way  - 2026-10-13T01:39:55Z clip-start:libraries-1 - 2026-10-13T01:45:04Z clip-start:models-1+- 2026-10-13T01:51:20Z clip-start:test-plan-1  ## Where the board stands @@ -58,12 +60,24 @@ What this step does: Assemble and validate the reviewed symbols, footprints and  What this step does: Check native board model resolution and inspect the selected library variants in the chosen EDA; use the component register for unresolved assets. +**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+ **Clip: models, still recording (started 2026-10-13T01:45:04Z); it appears here when the step ends.**  **Screenshot: the board when models began.**  ![the board when models began](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/shot-models-1-start.png) +### test-plan++What this step does: Think through how this board will be tested once it is built and on the probing workcell: the measurements a careful engineer would take (rails, switch node, feedback, ripple, enable, LEDs), the net each one needs, and a probe spot for every one. The binary checks each planned measurement has a probe-able spot (a 0.5 mm round test point or an exposed pad the pogo tip can land on, within 50 mm of a ground machine contact, not under a part body) and adds a test point to the netlist for every gap.++**Clip: test-plan, still recording (started 2026-10-13T01:51:20Z); it appears here when the step ends.**++**Screenshot: the board when test-plan began.**++![the board when test-plan began](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/shot-test-plan-1-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.@@ -72,8 +86,8 @@ Percent of each plan limit used, as the provider reports it, at the start of the |---|---|---|---|---| | claude | 5h | 2 % | 8 % | 6.0 % | | claude | Fable | 0 % | 0 % | 0.0 % |-| claude | week | 0 % | 2 % | 2.0 % |-| codex | week | 49 % | 50 % | 1.0 % |+| claude | week | 0 % | 3 % | 3.0 % |+| codex | week | 49 % | 51 % | 2.0 % |  *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.* 

⋯ 1 unchanged line ⋯