OCuLink Riser for the Supermicro AIOM Slot

@@ -1,17 +1,23 @@ # AI Flow run: claude on board-0 -**Finished** (board design checks) at 2026-10-13T08:38:25Z, 307.0 min of AI time from the prompt; the video is being cut.+**Delivered** at 2026-10-13T12:53:37Z: **503.8 min of AI time** from the prompt to "done, here is your video" (934.1 min on the wall clock).   Prompt at 2026-10-12T21:19:30Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. +## The video++**The final cut of this run, 60 s: only the moments something moved, every step in order, the AI's analysis drawings fullscreen, the run and step clocks in the corner, the words cut to the picture.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/final-1791895991.mp4" type="video/mp4"></video>+ ## Sessions  One row per human prompt: the AI's time on it, unobserved gaps excluded by the heuristic, which may include external AI work.  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-10-12T21:19:30Z | (open) | 306.9 | 372 | the first prompt |-| **all** | | | **307.0** | | |+| 1 | 2026-10-12T21:19:30Z | 2026-10-13T12:53:38Z | 503.8 | 430 | the first prompt |+| **all** | | | **503.8** | | |  ## Per step @@ -21,14 +27,14 @@ AI time only, the idle cut out. |---|---|---|---|---|---|---|---| | intake | 24.4 | 24.4 | 0.0 | 2 | 1 | 0 | 23.9 min | | placement | 20.9 | 8.1 | 12.8 | 17 | 3 | 2 | 5.7 min |-| routing | 127.1 | 7.2 | 119.9 | 32 | 3 | 0 | 4.8 min |+| routing | 151.2 | 7.2 | 143.9 | 32 | 3 | 0 | 4.8 min | | pours | 0.9 | 0.0 | 0.9 | 5 | 1 | 0 | 0.0 min | | current | 42.6 | 0.0 | 42.6 | 21 | 1 | 0 | 0.0 min | | thermal | 0.1 | 0.0 | 0.1 | 4 | 1 | 0 | 0.0 min | | finish | 33.5 | 0.0 | 33.5 | 20 | 1 | 0 | 0.0 min | | 3d | 3.6 | 0.0 | 3.6 | 6 | 1 | 0 | 0.0 min | | components | 10.8 | 7.5 | 3.3 | 9 | 1 | 0 | 6.0 min |-| export | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min |+| export | 172.8 | 0.0 | 172.8 | 13 | 1 | 0 | 0.0 min | | fields | 10.9 | 0.0 | 10.9 | 3 | 1 | 0 | 0.0 min | | libraries | 4.6 | 4.6 | 0.1 | 1 | 1 | 0 | 4.6 min | | models | 6.2 | 3.4 | 2.8 | 6 | 1 | 0 | 2.0 min |@@ -38,7 +44,7 @@ AI time only, the idle cut out. | silkscreen | 8.3 | 0.0 | 8.3 | 6 | 1 | 0 | 0.0 min | | test-plan | 11.0 | 9.2 | 1.8 | 5 | 1 | 0 | 9.1 min | | thermal-vias | 0.1 | 0.0 | 0.1 | 4 | 1 | 0 | 0.0 min |-| **total** | **306.9** | **64.8** | **242.2** | | | | |+| **total** | **503.8** | **64.8** | **439.0** | | | | |  ## Returns to earlier steps @@ -87,6 +93,8 @@ AI time only, the idle cut out. - 2026-10-13T07:32:14Z clip-start:finish-1 - 2026-10-13T08:08:52Z clip guard: the finish clip ran 36 min, past its 10 min budget twice over; stopped by the guard - 2026-10-13T08:38:54Z clip-start:export-1+- 2026-10-13T09:03:27Z clip guard: the export clip ran 24 min, past its 10 min budget twice over; stopped by the guard+- 2026-10-13T11:51:52Z recut: 22 clips re-cut (10x and action) with this binary's rules  ## Where the board stands @@ -105,8 +113,6 @@ One clip per step visit, sped up 10x, with the editor at the start and the end o  What this step does: Assemble and validate the reviewed symbols, footprints and selected model variants in the chosen EDA before placement. -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**- **Clip: libraries, the PCB editor from 2026-10-13T01:39:55Z to 2026-10-13T01:45:02Z. Motion only: 4.6 min of real time, 5 s of it had something moving; the clock in the corner is the real elapsed time.**  <video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/libraries-1.mp4" type="video/mp4"></video>@@ -127,9 +133,7 @@ What this step does: Assemble and validate the reviewed symbols, footprints and  What this step does: Check native board model resolution and inspect the selected library variants in the chosen EDA; use the component register for unresolved assets. -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**--**Clip: models, the PCB editor from 2026-10-13T01:45:04Z to 2026-10-13T01:51:18Z, 5.6 min of real time shown at 10x (0 s).**+**Clip: models, the PCB editor from 2026-10-13T01:45:04Z to 2026-10-13T01:51:18Z. Motion only: 5.6 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**  <video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/models-1.mp4" type="video/mp4"></video> @@ -145,9 +149,13 @@ What this step does: Check native board model resolution and inspect the selecte  What this step does: Think through how this board will be tested once it is built and on the probing workcell: the measurements a careful engineer would take (rails, switch node, feedback, ripple, enable, LEDs), the net each one needs, and a probe spot for every one. The binary checks each planned measurement has a probe-able spot (a 0.5 mm round test point or an exposed pad the pogo tip can land on, within 50 mm of a ground machine contact, not under a part body) and adds a test point to the netlist for every gap. -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: test-plan, the PCB editor from 2026-10-13T01:51:20Z to 2026-10-13T02:02:32Z. Motion only: 10.4 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/test-plan-1.mp4" type="video/mp4"></video> -**Clip: test-plan, still recording (started 2026-10-13T01:51:20Z); it appears here when the step ends.**+**Contact sheet: nine frames spread through the test-plan clip, what the camera saw.**++![nine frames of test-plan](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/test-plan-1-sheet.png)  **Screenshot: the board when test-plan began.** @@ -157,9 +165,13 @@ What this step does: Think through how this board will be tested once it is buil  What this step does: place the parts for routability, current and heat; the binary packs, checks courtyards and lands moves; reserve visible space for connector labels and the two-sided service silkscreen; the switch-node check refuses switch copper under another part or a switch loop longer than the spec allows, and sends the AI back here -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: placement, the PCB editor from 2026-10-13T02:02:33Z to 2026-10-13T02:15:20Z. Motion only: 11.8 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/placement-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the placement clip, what the camera saw.** -**Clip: placement, still recording (started 2026-10-13T02:02:33Z); it appears here when the step ends.**+![nine frames of placement](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/placement-1-sheet.png)  **Screenshot: the board when placement began.** @@ -169,9 +181,13 @@ What this step does: place the parts for routability, current and heat; the bina  What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: routing, the PCB editor from 2026-10-13T02:15:23Z to 2026-10-13T02:21:05Z. Motion only: 5.5 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/routing-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the routing clip, what the camera saw.** -**Clip: routing, still recording (started 2026-10-13T02:15:23Z); it appears here when the step ends.**+![nine frames of routing](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/routing-1-sheet.png)  **Screenshot: the board when routing began.** @@ -187,9 +203,13 @@ What this step does: place the parts for routability, current and heat; the bina  Why the AI came back here: the JLC 6L gate needs the stock rule pack: OCuLink A1/A21 pads trimmed 0.15 mm clear of the peg NPTH, so J2-J5 get the new footprint -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: placement, visit 2 (rework), the PCB editor from 2026-10-13T02:21:06Z to 2026-10-13T02:25:17Z. Motion only: 4.0 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.** -**Clip: placement, visit 2 (rework), still recording (started 2026-10-13T02:21:06Z); it appears here when the step ends.**+<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/placement-2.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the placement, visit 2 (rework) clip, what the camera saw.**++![nine frames of placement, visit 2 (rework)](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/placement-2-sheet.png)  **Screenshot: the board when placement, visit 2 (rework) began.** @@ -199,9 +219,13 @@ Why the AI came back here: the JLC 6L gate needs the stock rule pack: OCuLink A1  What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: routing, visit 2, the PCB editor from 2026-10-13T02:25:19Z to 2026-10-13T02:28:11Z. Motion only: 2.7 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/routing-2.mp4" type="video/mp4"></video> -**Clip: routing, visit 2, still recording (started 2026-10-13T02:25:19Z); it appears here when the step ends.**+**Contact sheet: nine frames spread through the routing, visit 2 clip, what the camera saw.**++![nine frames of routing, visit 2](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/routing-2-sheet.png)  **Screenshot: the board when routing, visit 2 began.** @@ -217,9 +241,13 @@ What this step does: place the parts for routability, current and heat; the bina  Why the AI came back here: the start board carried pre-trim copper of the PERST# buses; rebuilt from the final routes so the live plan and the start board split cleanly -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: placement, visit 3 (rework), the PCB editor from 2026-10-13T02:28:13Z to 2026-10-13T02:32:09Z. Motion only: 3.8 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/placement-3.mp4" type="video/mp4"></video> -**Clip: placement, visit 3 (rework), still recording (started 2026-10-13T02:28:13Z); it appears here when the step ends.**+**Contact sheet: nine frames spread through the placement, visit 3 (rework) clip, what the camera saw.**++![nine frames of placement, visit 3 (rework)](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/placement-3-sheet.png)  **Screenshot: the board when placement, visit 3 (rework) began.** @@ -245,9 +273,13 @@ What this step does: route to 100 percent with the spec's rules, gate with KiCad  What this step does: Heatsink vias where the heat is: for every part that dissipates real power (the regulator, the inductor, the catch diode, the FETs), an array of vias in its thermal pad or the copper it dumps heat into, stitched to the ground or the plane on the other side, sized and counted from its dissipation; the AI reviews the plan and the binary lands it. -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: thermal-vias, the PCB editor from 2026-10-13T03:46:25Z to 2026-10-13T03:46:41Z. Motion only: 0.3 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/thermal-vias-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the thermal-vias clip, what the camera saw.** -**Clip: thermal-vias, still recording (started 2026-10-13T03:46:25Z); it appears here when the step ends.**+![nine frames of thermal-vias](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/thermal-vias-1-sheet.png)  **Screenshot: the board when thermal-vias began.** @@ -261,9 +293,13 @@ What this step does: Heatsink vias where the heat is: for every part that dissip  What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: pours, the PCB editor from 2026-10-13T03:46:43Z to 2026-10-13T03:49:07Z. Motion only: 2.3 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/pours-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the pours clip, what the camera saw.** -**Clip: pours, still recording (started 2026-10-13T03:46:43Z); it appears here when the step ends.**+![nine frames of pours](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/pours-1-sheet.png)  **Screenshot: the board when pours began.** @@ -277,9 +313,13 @@ What this step does: pour every net the spec names, keepouts along Kelvin taps,  What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router. -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: outline, the PCB editor from 2026-10-13T03:49:09Z to 2026-10-13T03:49:17Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.** -**Clip: outline, still recording (started 2026-10-13T03:49:09Z); it appears here when the step ends.**+<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/outline-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the outline clip, what the camera saw.**++![nine frames of outline](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/outline-1-sheet.png)  **Screenshot: the board when outline began.** @@ -293,9 +333,13 @@ What this step does: Round the board's corners: every sharp outline corner becom  What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: current, the PCB editor from 2026-10-13T03:49:18Z to 2026-10-13T04:11:39Z. Motion only: 21.4 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/current-1.mp4" type="video/mp4"></video> -**Clip: current, still recording (started 2026-10-13T03:49:18Z); it appears here when the step ends.**+**Contact sheet: nine frames spread through the current clip, what the camera saw.**++![nine frames of current](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/current-1-sheet.png)  **Screenshot: the board when current began.** @@ -309,9 +353,13 @@ What this step does: IPC-2221 on every loaded net, pour and via capacity, the sa  What this step does: copper and vias at every hot tab against the rise budget; then the AI's own temperature rise drawing and a walkthrough of the pours it judged -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: thermal, the PCB editor from 2026-10-13T06:06:53Z to 2026-10-13T06:07:37Z. Motion only: 0.7 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/thermal-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the thermal clip, what the camera saw.** -**Clip: thermal, still recording (started 2026-10-13T06:06:53Z); it appears here when the step ends.**+![nine frames of thermal](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/thermal-1-sheet.png)  **Screenshot: the board when thermal began.** @@ -333,25 +381,37 @@ What this step does: copper and vias at every hot tab against the rise budget; t  What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: fields, the PCB editor from 2026-10-13T06:08:05Z to 2026-10-13T06:13:14Z. Motion only: 4.7 min of real time, 180 s of it had something moving; the clock in the corner is the real elapsed time.** -**Clip: fields, still recording (started 2026-10-13T06:08:05Z); it appears here when the step ends.**+<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/fields-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the fields clip, what the camera saw.**++![nine frames of fields](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/fields-1-sheet.png)  ### fields  What this step does: the fields on the board: adom-fields solves the current density of every loaded net, the heat flow in each copper layer with the vias, and the temperature over the board; the AI reads the issues and walks the board in the app on camera -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: fields, the PCB editor from 2026-10-13T06:14:06Z to 2026-10-13T06:19:16Z. Motion only: 4.7 min of real time, 180 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/fields-1.mp4" type="video/mp4"></video> -**Clip: fields, still recording (started 2026-10-13T06:14:06Z); it appears here when the step ends.**+**Contact sheet: nine frames spread through the fields clip, what the camera saw.**++![nine frames of fields](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/fields-1-sheet.png)  ### nets  What this step does: the copper pour walkthrough: every poured net (and every loaded, wide or Kelvin net) highlighted on its own in turn, the board framed, so the viewer sees where each net's copper is; the AI names each one -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: nets, the PCB editor from 2026-10-13T06:19:27Z to 2026-10-13T06:22:06Z. Motion only: 1.9 min of real time, 8 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/nets-1.mp4" type="video/mp4"></video> -**Clip: nets, still recording (started 2026-10-13T06:19:27Z); it appears here when the step ends.**+**Contact sheet: nine frames spread through the nets clip, what the camera saw.**++![nine frames of nets](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/nets-1-sheet.png)  **Screenshot: the board when nets began.** @@ -365,8 +425,6 @@ What this step does: the copper pour walkthrough: every poured net (and every lo  What this step does: Make both faces useful in real service: references and values, verified connector and machine-contact pinouts, polarity, board identity and bring-up labels; review native plots and assembled visibility. Offer the optional shared silkscreen dashboard: real solver events, candidate reasons, live/replay separation, fitted-model inspection and separately recorded detailed/5s replays. Audit every fitted body and every via/hole across the whole board, both faces, with coverage counts. Missing Fab geometry is not free space; native DRC does not establish fitted visibility. Keep unresolved labels explicit and do not apply an incomplete layout. Native geometry/edit/undo/refresh belongs to the EDA bridge. -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**- **Clip: silkscreen, the PCB editor from 2026-10-13T06:22:08Z to 2026-10-13T06:34:22Z. Motion only: 10.8 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**  <video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/silkscreen-1.mp4" type="video/mp4"></video>@@ -383,9 +441,13 @@ What this step does: Make both faces useful in real service: references and valu  What this step does: the 3D walkthrough: the viewer opened from the editor, then fit, top, tilt, orbit, zoom in, swing, front, bottom, flip, top, fit, all by menu command, no mouse -**This clip filmed nothing usable: no frames. It is kept as evidence and left out of the video.**+**Clip: 3d, the PCB editor from 2026-10-13T06:35:43Z to 2026-10-13T06:36:27Z. Motion only: 0.4 min of real time, 4 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/3d-1.mp4" type="video/mp4"></video> -**Clip: 3d, still recording (started 2026-10-13T06:35:43Z); it appears here when the step ends.**+**Contact sheet: nine frames spread through the 3d clip, what the camera saw.**++![nine frames of 3d](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/3d-1-sheet.png)  **Screenshot: the board when 3d began.** @@ -411,28 +473,40 @@ What this step does: finish refuses until everything is true; the AI cuts the vi  What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is. -**Clip: export, still recording (started 2026-10-13T08:38:54Z); it appears here when the step ends.**+**Clip: export, the PCB editor from 2026-10-13T08:38:54Z to 2026-10-13T09:05:02Z. Motion only: 24.6 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/export-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the export clip, what the camera saw.**++![nine frames of export](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/export-1-sheet.png)  **Screenshot: the board when export began.**  ![the board when export began](/blob/app/oculink-aiom-riser/docs/runs/ocp-oculink-riser-claude-20261012-2119/shot-export-1-start.png) +## Delivered++What the AI said when it delivered (the video is at the top of this page):++> The OCP NIC 3.0 SFF (Supermicro AIOM) to 4x OCuLink riser is finished and published at https://wiki.adom.inc/john/oculink-aiom-riser: 6-layer 85 ohm board, 32 lanes skew-matched, DRC 0 errors / 0 unconnected on the JLC 6L rules, current and heat solved, silkscreen audited, Gerbers/drill/BOM/CPL exported and re-checked. The 18 'blank' clips are not blank: ffprobe was missing from PATH when each stopped, and ffprobe now counts 228 to 38515 frames in each (recorded per clip in run.json, adom/adom-aiflow#48). The composed run video is 60 s; the narrated build clips are on the page.+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 2 % | 1 % | -1.0 % |+| claude | 5h | 2 % | 0 % | -2.0 % | | claude | Fable | 0 % | 0 % | 0.0 % | | claude | week | 0 % | 4 % | 4.0 % |-| codex | week | 49 % | 9 % | -40.0 % |+| codex | week | 49 % | 11 % | -38.0 % |  *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*  ## Given back -6 issue(s) or PR(s) filed by this run's AI to make the tool better for every Adom user:+7 issue(s) or PR(s) filed by this run's AI to make the tool better for every Adom user:  - issue https://wiki.adom.inc/adom/adom-aiflow/issues/45: etch planner: reversed top-face normal; TSSOP mark axis - issue https://wiki.adom.inc/adom/adom-aiflow/issues/47: rules install ignores layers; gate vs 6L pack; plan shape@@ -440,5 +514,6 @@ Percent of each plan limit used, as the provider reports it, at the start of the - issue https://wiki.adom.inc/adom/adom-symbol/issues/5: group gaps off grid - issue https://wiki.adom.inc/adom/kicad-bridge/issues/126: IPC move drops polygon closing vertex -> lib_footprint_mismatch - issue https://wiki.adom.inc/adom/adom-fields/issues/11: 6-layer stacks, PCG refinement, via ring lost at 0.2 mm+- issue https://wiki.adom.inc/adom/adom-aiflow/issues/48: KiCad lane: silkscreen proof, export command, ffprobe-missing blank clips, adopt voids evidence  Adom processes PRs within minutes during business hours: a non-stop PR intake runs all day.