Ghost Hand

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `pours`, 221.0 min of AI time since the prompt (483.7 min on the wall clock). This page updates at every step change.+**Running**: step `outline`, 228.0 min of AI time since the prompt (490.6 min on the wall clock). This page updates at every step change.  Prompt at 2026-11-06T14:34:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-06T14:34:00Z | (open) | 221.0 | 263 | the first prompt |-| **all** | | | **221.0** | | |+| 1 | 2026-11-06T14:34:00Z | (open) | 227.9 | 263 | the first prompt |+| **all** | | | **228.0** | | |  ## Per step @@ -22,18 +22,19 @@ AI time only, the idle cut out. | intake | 2.9 | 2.9 | 0.0 | 1 | 1 | 0 | 2.8 min | | placement | 58.6 | 0.0 | 58.6 | 31 | 2 | 1 | 0.0 min | | routing | 33.0 | 0.0 | 33.0 | 18 | 2 | 0 | 0.0 min |-| pours | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min |+| pours | 2.7 | 0.0 | 2.7 | 6 | 1 | 0 | 0.0 min | | components | 0.5 | 0.0 | 0.5 | 6 | 1 | 0 | 0.0 min |-| design | 113.3 | 0.0 | 113.3 | 4 | 1 | 0 | 0.0 min |+| design | 117.5 | 0.0 | 117.5 | 4 | 1 | 0 | 0.0 min | | library | 3.0 | 0.0 | 3.0 | 2 | 1 | 0 | 0.0 min | | models | 2.1 | 0.0 | 2.1 | 8 | 1 | 0 | 0.0 min |+| outline | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min | | parts | 3.5 | 0.0 | 3.5 | 11 | 1 | 0 | 0.0 min | | project-page | 1.9 | 0.0 | 1.9 | 12 | 2 | 1 | 0.0 min | | rules | 0.4 | 0.3 | 0.1 | 4 | 1 | 0 | 0.3 min | | sourcing | 1.1 | 0.0 | 1.1 | 4 | 1 | 0 | 0.0 min | | test-plan | 0.7 | 0.0 | 0.7 | 2 | 1 | 0 | 0.0 min | | thermal-vias | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min |-| **total** | **221.0** | **3.2** | **217.8** | | | | |+| **total** | **227.9** | **3.2** | **224.8** | | | | |  ## Returns to earlier steps @@ -63,12 +64,15 @@ AI time only, the idle cut out. - 2026-11-06T22:29:23Z clip guard: the routing clip ran 76 min, past its 30 min budget twice over; stopped by the guard - 2026-11-06T22:36:42Z clip-start:thermal-vias-1 - 2026-11-06T22:37:39Z clip-start:pours-1+- 2026-11-06T22:44:34Z clip-start:outline-1  ## Where the board stands  - routing: 3 unrouted after null passes - gate: 0 new DRC errors, 0 unconnected, null inherited - landed live: 27 of 74 route entries+- pours (landed): 1 groups, failed []+- copper kept (mm2 per layer): {"B.Cu":796.24,"F.Cu":659.57}  ## The steps on camera @@ -332,12 +336,32 @@ What this step does: Heatsink vias where the heat is: for every part that dissip  What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept -**Clip: pours, still recording (started 2026-11-06T22:37:39Z); it appears here when the step ends.**+**Clip: pours, the PCB editor from 2026-11-06T22:37:39Z to 2026-11-06T22:40:55Z. Motion only: 2.7 min of real time, 2 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/pours-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the pours clip, what the camera saw.**++![nine frames of pours](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/pours-1-sheet.png)  **Screenshot: the board when pours began.**  ![the board when pours began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-pours-1-start.png) +**Screenshot: the board when pours ended.**++![the board when pours ended](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-pours-1-end.png)++### outline++What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router.++**Clip: outline, still recording (started 2026-11-06T22:44:34Z); it appears here when the step ends.**++**Screenshot: the board when outline began.**++![the board when outline began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-outline-1-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.