project
Ghost Hand
Public Unreviewedby John Lauer
A small battery gadget that keeps an automatic sink faucet running while you use the sink: it learns the faucet's timeout, re-arms with the shortest blip, and stops after 10 minutes or when picked up.
← Commit history
aiflow run ghost-hand-claude-opus-5-5-20261108-1620: fields
1 file changed
+8−7
docs/runs/ghost-hand-claude-opus-5-5-20261108-1620/README.md+8−7@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `silkscreen`, 222.2 min of AI time since the prompt (262.6 min on the wall clock). This page updates at every step change.+**Running**: step `fields`, 453.4 min of AI time since the prompt (516.8 min on the wall clock). This page updates at every step change. Prompt at 2026-11-08T16:20:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-08T16:20:00Z | (open) | 222.2 | 40 | the first prompt |-| **all** | | | **222.2** | | |+| 1 | 2026-11-08T16:20:00Z | (open) | 453.4 | 63 | the first prompt |+| **all** | | | **453.4** | | | ## Per step @@ -27,7 +27,7 @@ AI time only, the idle cut out. | thermal | 0.2 | 0.1 | 0.0 | 2 | 1 | 0 | 0.1 min | | components | 0.1 | 0.1 | 0.0 | 2 | 1 | 0 | 0.1 min | | design | 1.1 | 0.1 | 1.1 | 5 | 1 | 0 | 0.1 min |-| fields | 23.9 | 0.4 | 23.5 | 2 | 1 | 0 | 0.3 min |+| fields | 23.9 | 0.4 | 23.5 | 3 | 2 | 1 | 0.3 min | | library | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min | | models | 0.6 | 0.1 | 0.5 | 2 | 1 | 0 | 0.1 min | | nets | 0.8 | 0.1 | 0.7 | 2 | 1 | 0 | 0.1 min |@@ -36,12 +36,12 @@ AI time only, the idle cut out. | project-page | 1.4 | 0.5 | 0.9 | 5 | 2 | 0 | 0.1 min | | rules | 0.9 | 0.8 | 0.1 | 2 | 1 | 0 | 0.8 min | | schematic | 0.3 | 0.1 | 0.2 | 2 | 1 | 0 | 0.1 min |-| silkscreen | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min |+| silkscreen | 231.2 | 181.4 | 49.8 | 133 | 1 | 0 | 12.7 min | | simulation | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min | | sourcing | 9.4 | 3.2 | 6.2 | 2 | 1 | 0 | 3.2 min | | test-plan | 26.4 | 25.8 | 0.6 | 5 | 1 | 0 | 13.6 min | | thermal-vias | 0.2 | 0.1 | 0.1 | 6 | 2 | 0 | 0.1 min |-| **total** | **222.2** | **123.3** | **98.8** | | | | |+| **total** | **453.4** | **304.7** | **148.7** | | | | | ## Returns to earlier steps @@ -49,6 +49,7 @@ AI time only, the idle cut out. - 2026-11-08T19:29:50Z back to **placement** (visit 3): three links boxed in after routing: move test pad TP4 next to U2's PROG pin and R8 (VBAT sense divider) next to the VBAT copper at U3 - 2026-11-08T20:11:00Z back to **pours** (visit 2): the native save after landing the B.Cu pour voided the pour record; land the same plan again to re-record it - 2026-11-08T20:15:05Z back to **routing** (visit 4): current screen: Freerouting drew the power nets at the 0.12 mm default; widened VBAT, the emitter nets, VBUS, 3V3, VLED and GND wherever clearance allows (rev2/tools/widen.py, 585 segments, DRC clean)+- 2026-11-09T00:56:47Z back to **fields** (visit 2): ## Decisions along the way @@ -175,7 +176,7 @@ Percent of each plan limit used, as the provider reports it, at the start of the | antigravity | 3p week | 0.00 % | 0.00 % | 0.00 % | | antigravity | week | 0.00 % | 0.00 % | 0.00 % | | claude | Fable | 0.00 % | 0.00 % | 0.00 % |-| claude | week | 8.00 % | 11.00 % | 3.00 % |+| claude | week | 8.00 % | 13.00 % | 5.00 % | | codex | week | 1.00 % | 1.00 % | 0.00 % | *The limits are per account, not per run: every AI thread signed in as this user draws on the same numbers, so a run made while other threads were working shows their usage too. Read it as an upper bound unless this run was the only thread active.*