Ghost Hand

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `outline`, 189.7 min of AI time since the prompt (230.2 min on the wall clock). This page updates at every step change.+**Running**: step `pours`, 190.6 min of AI time since the prompt (231.0 min on the wall clock). This page updates at every step change.  Prompt at 2026-11-08T16:20:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-08T16:20:00Z | (open) | 189.7 | 40 | the first prompt |-| **all** | | | **189.7** | | |+| 1 | 2026-11-08T16:20:00Z | (open) | 190.6 | 40 | the first prompt |+| **all** | | | **190.6** | | |  ## Per step @@ -22,12 +22,12 @@ AI time only, the idle cut out. | intake | 13.2 | 13.2 | 0.0 | 1 | 1 | 0 | 13.1 min | | placement | 41.5 | 26.5 | 15.0 | 31 | 3 | 2 | 7.6 min | | routing | 81.6 | 40.5 | 41.1 | 29 | 3 | 0 | 14.9 min |-| pours | 1.3 | 0.1 | 1.2 | 6 | 1 | 0 | 0.1 min |+| pours | 1.3 | 0.1 | 1.2 | 7 | 2 | 1 | 0.1 min | | components | 0.1 | 0.1 | 0.0 | 2 | 1 | 0 | 0.1 min | | design | 1.1 | 0.1 | 1.1 | 5 | 1 | 0 | 0.1 min | | library | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min | | models | 0.6 | 0.1 | 0.5 | 2 | 1 | 0 | 0.1 min |-| outline | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min |+| outline | 0.8 | 0.3 | 0.5 | 5 | 1 | 0 | 0.2 min | | parts | 11.5 | 7.5 | 4.1 | 12 | 1 | 0 | 5.2 min | | project-page | 1.4 | 0.5 | 0.9 | 5 | 2 | 0 | 0.1 min | | rules | 0.9 | 0.8 | 0.1 | 2 | 1 | 0 | 0.8 min |@@ -36,12 +36,13 @@ AI time only, the idle cut out. | sourcing | 9.4 | 3.2 | 6.2 | 2 | 1 | 0 | 3.2 min | | test-plan | 26.4 | 25.8 | 0.6 | 5 | 1 | 0 | 13.6 min | | thermal-vias | 0.2 | 0.1 | 0.1 | 3 | 1 | 0 | 0.1 min |-| **total** | **189.7** | **118.7** | **71.0** | | | | |+| **total** | **190.6** | **119.0** | **71.6** | | | | |  ## Returns to earlier steps  - 2026-11-08T19:00:43Z back to **placement** (visit 2): U1's bottom-row pins (RX_SIG, LED_DIN) and right-column pins (SDA, VBUS_SENSE) could not escape: U5's top pads sit 1 mm below U1; move U5 1 mm toward the front edge - 2026-11-08T19:29:50Z back to **placement** (visit 3): three links boxed in after routing: move test pad TP4 next to U2's PROG pin and R8 (VBAT sense divider) next to the VBAT copper at U3+- 2026-11-08T20:11:00Z back to **pours** (visit 2): the native save after landing the B.Cu pour voided the pour record; land the same plan again to re-record it  ## Decisions along the way @@ -53,6 +54,9 @@ AI time only, the idle cut out.  ## Where the board stands +- gate: 0 new DRC errors, 0 unconnected, null inherited+- pours (verified existing): 1 groups, failed ["unplanned board zone 0: GND_FCu_plane"]+- copper kept (mm2 per layer): {"B.Cu":355.48,"F.Cu":296.97}  ## The steps on camera