Ghost Hand

@@ -1,6 +1,6 @@ # AI Flow run: claude-opus-5-5 on board-0 -**Running**: step `finish`, 329.8 min of AI time since the prompt (592.4 min on the wall clock). This page updates at every step change.+**finish ran with 9 open item(s); not cleared for fabrication** (2026-11-07T03:00:01Z, 495.5 min of AI time from the prompt). The open items are listed under the run's summary; finish again after any change.  Prompt at 2026-11-06T14:34:00Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -10,8 +10,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h  | Session | Prompt at | Done at | AI time min | Unobserved gap min | What | |---|---|---|---|---|---|-| 1 | 2026-11-06T14:34:00Z | (open) | 329.8 | 263 | the first prompt |-| **all** | | | **329.8** | | |+| 1 | 2026-11-06T14:34:00Z | (open) | 495.5 | 263 | the first prompt |+| **all** | | | **495.5** | | |  ## Per step @@ -25,10 +25,11 @@ AI time only, the idle cut out. | pours | 2.7 | 0.0 | 2.7 | 6 | 1 | 0 | 0.0 min | | current | 12.6 | 0.0 | 12.6 | 52 | 1 | 0 | 0.0 min | | thermal | 0.4 | 0.0 | 0.4 | 5 | 1 | 0 | 0.0 min |-| finish | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min |+| finish | 114.1 | 0.0 | 114.1 | 8 | 1 | 0 | 0.0 min | | 3d | 10.1 | 0.0 | 10.1 | 6 | 1 | 0 | 0.0 min | | components | 0.5 | 0.0 | 0.5 | 6 | 1 | 0 | 0.0 min |-| design | 160.0 | 0.0 | 160.0 | 4 | 1 | 0 | 0.0 min |+| design | 211.7 | 0.0 | 211.7 | 4 | 1 | 0 | 0.0 min |+| export | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min | | fields | 25.8 | 0.0 | 25.8 | 3 | 1 | 0 | 0.0 min | | library | 3.0 | 0.0 | 3.0 | 2 | 1 | 0 | 0.0 min | | models | 2.1 | 0.0 | 2.1 | 8 | 1 | 0 | 0.0 min |@@ -41,7 +42,7 @@ AI time only, the idle cut out. | sourcing | 1.1 | 0.0 | 1.1 | 4 | 1 | 0 | 0.0 min | | test-plan | 0.7 | 0.0 | 0.7 | 2 | 1 | 0 | 0.0 min | | thermal-vias | 0.1 | 0.0 | 0.1 | 3 | 1 | 0 | 0.0 min |-| **total** | **329.8** | **3.2** | **326.6** | | | | |+| **total** | **495.5** | **3.2** | **492.3** | | | | |  ## Returns to earlier steps @@ -97,6 +98,9 @@ AI time only, the idle cut out. - 2026-11-07T00:10:25Z clip-start:silkscreen-1 - 2026-11-07T00:23:26Z clip-start:3d-1 - 2026-11-07T00:26:24Z clip-start:finish-1+- 2026-11-07T01:06:39Z clip guard: the finish clip ran 40 min, past its 10 min budget twice over; stopped by the guard+- 2026-11-07T02:58:53Z pulled 5 clip(s) that had not reached the run+- 2026-11-07T03:12:08Z clip-start:export-1  ## Where the board stands @@ -116,7 +120,13 @@ One clip per step visit, sped up 10x, with the editor at the start and the end o  What this step does: Choose the fab and load its design rules before anything is drawn: the AI asks the human which fab builds the board (3rdPartyFab by default, JLCPCB on request) and loads that fab's rule profile into the EDA (KiCad .kicad_dru, Fusion DRC rules), so every later step designs to the process that will build it. -**Clip: rules, still recording (started 2026-11-06T14:36:57Z); it appears here when the step ends.**+**Clip: rules, the PCB editor from 2026-11-06T14:36:57Z to 2026-11-06T15:00:09Z. Motion only: 18.1 min of real time, 799 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/rules-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the rules clip, what the camera saw.**++![nine frames of rules](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/rules-1-sheet.png)  **Screenshot: the board when rules began.** @@ -190,7 +200,13 @@ What this step does:  What this step does: The chosen parts on the Adom wiki: every BOM row with an MPN matched to its wiki component page (symbol, footprint, STEP); a missing page is made before going on. Each page is shown in a Hydrogen tab as it is confirmed, so the viewer sees the parts being picked. -**Clip: parts, still recording (started 2026-11-06T15:06:10Z); it appears here when the step ends.**+**Clip: parts, the PCB editor from 2026-11-06T15:06:10Z to 2026-11-06T15:26:30Z. Motion only: 16.7 min of real time, 729 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/parts-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the parts clip, what the camera saw.**++![nine frames of parts](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/parts-1-sheet.png)  **Screenshot: the board when parts began.** @@ -204,7 +220,13 @@ What this step does: The chosen parts on the Adom wiki: every BOM row with an MP  What this step does: Revision 1 of the board's project page before any EDA work: README (what the board is, its requirements) with the component table linking every part's wiki page, and a KiCad PCM repository of all the parts (an Adom Cloud Library exported and repackaged), so KiCad installs them in one go. -**Clip: project-page, still recording (started 2026-11-06T15:27:24Z); it appears here when the step ends.**+**Clip: project-page, the PCB editor from 2026-11-06T15:27:24Z to 2026-11-06T15:43:24Z. Motion only: 2.9 min of real time, 78 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/project-page-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the project-page clip, what the camera saw.**++![nine frames of project-page](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/project-page-1-sheet.png)  **Screenshot: the board when project-page began.** @@ -330,7 +352,13 @@ What this step does: place the parts for routability, current and heat; the bina  Why the AI came back here: U1 needs the ATtiny1616's own wiki footprint: KiCad 10's VQFN-20 uses custom-shape pads the grid router cannot see, so all 19 U1 connections had no path -**Clip: placement, visit 2 (rework), still recording (started 2026-11-06T19:48:27Z); it appears here when the step ends.**+**Clip: placement, visit 2 (rework), the PCB editor from 2026-11-06T19:48:27Z to 2026-11-06T21:12:55Z. Motion only: 5.6 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/placement-2.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the placement, visit 2 (rework) clip, what the camera saw.**++![nine frames of placement, visit 2 (rework)](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/placement-2-sheet.png)  **Screenshot: the board when placement, visit 2 (rework) began.** @@ -410,7 +438,13 @@ What this step does: Round the board's corners: every sharp outline corner becom  What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged -**Clip: current, still recording (started 2026-11-06T22:45:56Z); it appears here when the step ends.**+**Clip: current, the PCB editor from 2026-11-06T22:45:56Z to 2026-11-06T23:25:54Z. Motion only: 20.0 min of real time, 14 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/current-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the current clip, what the camera saw.**++![nine frames of current](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/current-1-sheet.png)  **Screenshot: the board when current began.** @@ -512,12 +546,28 @@ What this step does: the 3D walkthrough: the viewer opened from the editor, then  What this step does: finish refuses until everything is true; the AI cuts the video and delivers -**Clip: finish, still recording (started 2026-11-07T00:26:24Z); it appears here when the step ends.**+**Clip: finish, the PCB editor from 2026-11-07T00:26:24Z to 2026-11-07T01:14:44Z. Motion only: 40.3 min of real time, 44 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/finish-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the finish clip, what the camera saw.**++![nine frames of finish](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/finish-1-sheet.png)  **Screenshot: the board when finish began.**  ![the board when finish began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-finish-1-start.png) +### export++What this step does: The finish line for the human: Gerbers, drill, BOM and pick-and-place (CPL) written from the finished board, checked, and announced in the chat with where every file is.++**Clip: export, still recording (started 2026-11-07T03:12:08Z); it appears here when the step ends.**++**Screenshot: the board when export began.**++![the board when export began](/blob/app/ghost-hand/docs/runs/ghost-hand-claude-opus-5-5-20261106-1434/shot-export-1-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.