# How the video was made

The video is cut from footage captured while the board was being built, plus a few shots made afterwards. Everything here is something you can do in [Adom Hydrogen](https://wiki.adom.inc/adom/hydrogen) for your own board.

[Watch the video on YouTube](https://www.youtube.com/watch?v=vKUMzy261zs)

## Capture while you build

You can't film the past, so the footage has to be recorded during the run:

- **Every step, as it happens.** adom-aiflow records a clip of each step (placement, routing, pours, analysis, silkscreen) with [Adom Bridge](https://wiki.adom.inc/adom/adom-bridge)'s window recorder. Those raw clips are on the [build clips](clips.md) page.
- **The prompt being typed.** Record the AI thread in Hydrogen while you type the request, so the video can open on it.
- **Your apps at work.** Hydrogen shows the AI on the left and a webview on the right, which is a good frame for dashboards such as the [Adom SPICE dashboard](https://wiki.adom.inc/adom/adom-spice-skillpack).
- **The token cost.** Note the tokens the run used if you want a cost scene.

## Make the shots

- **Smooth 3D.** The board orbit and the D1 close-up are rendered frame by frame from the board's 3D model in a headless browser, not screen-recorded, so they never stutter.
- **Analysis views.** The current and heat shots come from [Adom Fields](https://wiki.adom.inc/adom/adom-fields), captured the same way.
- **Pages and schematics.** Wiki pages are captured scrolling, and the schematic is a high-resolution export panned with a slow, eased camera move.
- **Motion in every scene.** Every shot has a gentle push-in or pan, and long recordings are sped up to their action.

## Scenes

| starts at | scene | footage |
|---|---|---|
| 0:00 | Logo | The Adom logo sting. |
| 0:04 | The prompt | The request typed into Claude Code in Adom Hydrogen. |
| 0:15 | The board | An orbit of the finished board, rendered from its 3D model. |
| 0:30 | The circuit | The KiCad schematic, with the 3D chip outlines on U1, C1, L1 and D1. |
| 1:00 | Simulation | The Adom SPICE dashboard in Hydrogen's webview, with the LTspice and PSpice for TI windows driven through Adom Bridge. |
| 1:28 | Placement | KiCad 10 driven live through the [Adom KiCad Bridge](https://wiki.adom.inc/adom/kicad-bridge). |
| 1:41 | Routing and pours | The routed board, the copper pours, then each net (GND, VIN, VOUT, SW) selected in KiCad. |
| 1:55 | Current and heat | Adom Fields with the parts standing on the heat map, flying in to the SW-node choke point. |
| 2:10 | The rework | The reroute, the SW neck circled in KiCad, and the final heat map. |
| 2:27 | Silkscreen | The silkscreen placed live, group by group. |
| 2:38 | Part models | The board before and after the part models got their part numbers, and a close-up of D1. |
| 2:54 | On the Adom wiki | The parts' own wiki pages. |
| 3:08 | What it cost | The AI tokens the build used. |
| 3:27 | Inside Hydrogen | The AI and the webview working together. |
| 3:48 | Logo | The closing sting. |

## Put it together

- **Review clip by clip.** Load each scene into [Adom Video Post-Production](https://wiki.adom.inc/adom/adom-video-post)'s storyboard and approve them one at a time before assembling.
- **Voice.** The voice-over is a human recording, laid over the finished cut. [adom-tts](https://wiki.adom.inc/adom/adom-tts) works for a draft narration while you review.
- **Thumbnail.** Built from the project's own pieces: the analysis render of the board, a Hydrogen screenshot and the Adom brand fonts.
- **Hosting.** Upload a high-quality master (we used 1440p) to YouTube and link it from your page.

The [aiflow-process-video](https://wiki.adom.inc/adom/adom-aiflow) skill in adom-aiflow walks your AI through all of this for your own board.
