project
12 V to 5 V / 1 A Buck Molecule (TPS54202)
Public Unreviewedby John Lauer
An independently designed 12 V to 5 V, 1 A synchronous buck molecule (TI TPS54202), with calculations, ngspice and PSpice simulation, KiCad 10 schematic and board, and the board laid out and analysed with adom-aiflow.
← Commit history
D1 and C6-C8 at datasheet heights; clip 6 refreshed
5 files changed
+11005−10678
diff truncated
docs/clips/etch-cleanup-poster.jpg⋯ 1 unchanged line ⋯
docs/clips/etch-cleanup.mp4⋯ 1 unchanged line ⋯
docs/sourcing.md+2−2@@ -61,7 +61,7 @@ Every footprint on the board has a 3D model. The board points at portable copies |---|---|---| | L1 Abracon AMPLH5030S-150MT | **Abracon's official STEP** (`AMPLH5030S.STEP.zip` from abracon.com) | found by searching the series name `AMPLH5030S`, not the ordering code. The model is Y-up, so it is rotated -90 deg about X and raised +0.05 mm in Z. The footprint was drawn from the datasheet's recommended land pattern (p3) | | C1 Panasonic EEE-FK1V470P | **Panasonic's official case-D STEP** (`DS_Alumi_D_5.zip`, Panasonic industrial CAD downloads) | Y-up, rotated -90 deg about X. The polarity marks faced the wrong way at first, so the model was turned 180 deg about Z after a check in KiCad's native 3D viewer |-| C6, C7, C8 Samsung CL21A226MPQNNNE | Adom wiki component page STEP | Y-up, rotated -90 deg about X |+| C6, C7, C8 Samsung CL21A226MPQNNNE | Adom wiki component page STEP | Y-up, rotated -90 deg about X. The page's Samsung model is a thinner sibling part (0.95 mm), so it is scaled to this MPN's 1.25 mm datasheet thickness | | U1, C4, C5, C9, R1 to R8, D1 | Adom wiki component page for the exact MPN, with a per-MPN STEP in `kicad/3d/` | U1 uses KiCad's TSOT-23-6 (DDC) footprint, with its pin 1 checked in native 3D | | C2, C3 Yageo CC1206KKX7R8BB106 | the [john/cc1206kkx7r8bb106](https://wiki.adom.inc/john/cc1206kkx7r8bb106) component page's STEP, laser-etched | no Yageo STEP was found on 2026-09-29, so the page uses the standard EIA 1206 body; until 2026-09-30 the board used KiCad's stock 1206 model | | MP1 to MP4, J1 to J6 | Adom KiCad Library 1.2.3 footprints and STEP models | |@@ -77,6 +77,6 @@ Before the official Abracon STEP turned up, the inductor had been drawn from dat Every part with an MPN (U1, C1 to C9, R1 to R8) carries it as a flat laser-etch mark on the top face, made with `adom-aiflow-etch` (adom-aiflow 0.1.43) and the adom-chip-laser service. The mark is a zero-thickness face, so it adds few triangles, and the vendor colours are kept. It runs along the part's long axis (U1, C2, C3) or, on C1, along the silver field of the can so it stays off the black polarity stripe, and on the MLCCs and chip resistors it is seated on the ceramic between the end caps. D1's mark is on the side of its lens so the window stays clear. L1's Abracon model already carries its printed AMPLH5030S marking, so it was not etched again. [Clip 6](docs/clips-rework.md#clip-6) shows the board before and after. -D1 uses the coloured model from the [IN-S63BTG](https://wiki.adom.inc/adom/in-s63btg) basic-part page: its lens is tinted to the datasheet's 527 nm dominant wavelength and softened so it looks like real epoxy. Every Adom basic-part LED page now ships that coloured STEP as the default, with the plain model kept as `-uncoloured.step`.+D1 uses the coloured model from the [IN-S63BTG](https://wiki.adom.inc/adom/in-s63btg) basic-part page, now at the datasheet height (0.55 mm; KiCad's generic model was 1.1 mm): its lens is tinted to the datasheet's 527 nm dominant wavelength and softened so it looks like real epoxy. Every Adom basic-part LED page now ships that coloured STEP as the default, with the plain model kept as `-uncoloured.step`. The electrolytic's case size had first been written into the BOM from memory. Looking for the model forced a check against the Panasonic page (6.3 x 5.8 mm, code D). Package dimensions in the BOM now always cite where they came from.
kicad/3d/CL21A226MPQNNNE.step+10141−9834@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-09-30T07:39:07',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-09-30T14:07:19',('Author'),( 'Open CASCADE'),'Open CASCADE STEP processor 8.0','Open CASCADE 8.0' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));@@ -25,11 +25,11 @@ DATA; #13 = DIRECTION('',(0.,0.,1.)); #14 = DIRECTION('',(1.,0.,-0.)); #15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);-#16 = CARTESIAN_POINT('',(0.,0.,0.));+#16 = CARTESIAN_POINT('',(0.,0.624999775,0.624999775)); #17 = DIRECTION('',(-0.,1.,1.110223024625E-16)); #18 = DIRECTION('',(1.,0.,0.)); #19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);-#20 = CARTESIAN_POINT('',(0.,0.,0.));+#20 = CARTESIAN_POINT('',(0.,0.624999775,0.624999775)); #21 = DIRECTION('',(-0.,1.,1.110223024625E-16)); #22 = DIRECTION('',(1.,0.,0.)); #23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) @@ -52,7 +52,7 @@ GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT( #35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); #36 = SHAPE_REPRESENTATION('',(#11,#37),#41); #37 = AXIS2_PLACEMENT_3D('',#38,#39,#40);-#38 = CARTESIAN_POINT('',(0.,0.,0.));+#38 = CARTESIAN_POINT('',(0.,0.624999775,-0.624999775)); #39 = DIRECTION('',(0.,-1.,1.110223024625E-16)); #40 = DIRECTION('',(1.,0.,0.)); #41 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) @@ -79,10169 +79,10476 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #56 = PRODUCT('CL21A105KACLNNC','CL21A105KACLNNC','',(#57)); #57 = PRODUCT_CONTEXT('',#2,'mechanical'); #58 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');-#59 = SHAPE_REPRESENTATION('',(#11,#60,#1690,#3304),#3970);+#59 = SHAPE_REPRESENTATION('',(#11,#60,#1486,#2912),#3522); #60 = MANIFOLD_SOLID_BREP('',#61);-#61 = CLOSED_SHELL('',(#62,#182,#297,#544,#654,#754,#854,#930,#984,#1055- ,#1104,#1153,#1229,#1279,#1334,#1405,#1432,#1459,#1466,#1515,#1543,- #1571,#1599,#1627,#1655,#1683));-#62 = ADVANCED_FACE('',(#63),#77,.F.);+#61 = CLOSED_SHELL('',(#62,#182,#295,#540,#646,#738,#830,#887,#944,#991,+ #1017,#1043,#1100,#1127,#1164,#1211,#1237,#1263,#1270,#1317,#1344,+ #1371,#1398,#1425,#1452,#1479));+#62 = ADVANCED_FACE('',(#63),#76,.F.); #63 = FACE_BOUND('',#64,.T.); #64 = EDGE_LOOP('',(#65,#100,#128,#156)); #65 = ORIENTED_EDGE('',*,*,#66,.T.); #66 = EDGE_CURVE('',#67,#69,#71,.T.); #67 = VERTEX_POINT('',#68);-#68 = CARTESIAN_POINT('',(-1.,0.9,0.575));+#68 = CARTESIAN_POINT('',(-1.,1.1842101,0.575)); #69 = VERTEX_POINT('',#70);-#70 = CARTESIAN_POINT('',(-1.,0.9,-0.575));-#71 = SURFACE_CURVE('',#72,(#76,#88),.PCURVE_S1.);-#72 = LINE('',#73,#74);-#73 = CARTESIAN_POINT('',(-1.,0.9,-0.625));-#74 = VECTOR('',#75,1.);-#75 = DIRECTION('',(-1.734723475977E-16,-0.,-1.));-#76 = PCURVE('',#77,#82);-#77 = PLANE('',#78);-#78 = AXIS2_PLACEMENT_3D('',#79,#80,#81);-#79 = CARTESIAN_POINT('',(-1.,0.95,-0.625));-#80 = DIRECTION('',(1.,0.,-1.734723475977E-16));-#81 = DIRECTION('',(-1.734723475977E-16,0.,-1.));-#82 = DEFINITIONAL_REPRESENTATION('',(#83),#87);-#83 = LINE('',#84,#85);-#84 = CARTESIAN_POINT('',(-0.,-5.E-02));-#85 = VECTOR('',#86,1.);-#86 = DIRECTION('',(1.,-0.));-#87 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#88 = PCURVE('',#89,#94);-#89 = CYLINDRICAL_SURFACE('',#90,5.E-02);-#90 = AXIS2_PLACEMENT_3D('',#91,#92,#93);-#91 = CARTESIAN_POINT('',(-0.95,0.9,1.647987302178E-16));-#92 = DIRECTION('',(-1.734723475977E-16,0.,-1.));-#93 = DIRECTION('',(-1.,0.,1.734723475977E-16));+#70 = CARTESIAN_POINT('',(-1.,1.1842101,-0.575));+#71 = SURFACE_CURVE('',#72,(#75,#86),.PCURVE_S1.);+#72 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#73,#74),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#73 = CARTESIAN_POINT('',(-1.,1.1842101,0.575));+#74 = CARTESIAN_POINT('',(-1.,1.1842101,-0.575));+#75 = PCURVE('',#76,#81);+#76 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#77,#78)+ ,(#79,#80+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-1.2,-5.E-02),(-0.9,+ -5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#77 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.575));+#78 = CARTESIAN_POINT('',(-1.,1.1842101,0.575));+#79 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.575));+#80 = CARTESIAN_POINT('',(-1.,1.1842101,-0.575));+#81 = DEFINITIONAL_REPRESENTATION('',(#82),#85);+#82 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83,#84),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#83 = CARTESIAN_POINT('',(-1.2,-5.E-02));+#84 = CARTESIAN_POINT('',(-5.E-02,-5.E-02));+#85 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#86 = PCURVE('',#87,#94);+#87 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#88,#89)+ ,(#90,#91)+,(#92,#93+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),+ (0.,1.570796326795),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#88 = CARTESIAN_POINT('',(-1.,1.1842101,0.575));+#89 = CARTESIAN_POINT('',(-1.,1.1842101,-0.575));+#90 = CARTESIAN_POINT('',(-1.,1.24999955,0.575));+#91 = CARTESIAN_POINT('',(-1.,1.24999955,-0.575));+#92 = CARTESIAN_POINT('',(-0.95,1.24999955,0.575));+#93 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.575)); #94 = DEFINITIONAL_REPRESENTATION('',(#95),#99);-#95 = LINE('',#96,#97);-#96 = CARTESIAN_POINT('',(0.,0.625));-#97 = VECTOR('',#98,1.);-#98 = DIRECTION('',(0.,1.));+#95 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#96,#97,#98),.UNSPECIFIED.,.F.,.F.+ ,(3,3),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#96 = CARTESIAN_POINT('',(0.,-0.575));+#97 = CARTESIAN_POINT('',(0.,1.714314964495E-16));+#98 = CARTESIAN_POINT('',(0.,0.575)); #99 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #100 = ORIENTED_EDGE('',*,*,#101,.T.); #101 = EDGE_CURVE('',#69,#102,#104,.T.); #102 = VERTEX_POINT('',#103);-#103 = CARTESIAN_POINT('',(-1.,5.E-02,-0.575));-#104 = SURFACE_CURVE('',#105,(#109,#116),.PCURVE_S1.);-#105 = LINE('',#106,#107);-#106 = CARTESIAN_POINT('',(-1.,0.95,-0.575));-#107 = VECTOR('',#108,1.);-#108 = DIRECTION('',(0.,-1.,0.));-#109 = PCURVE('',#77,#110);-#110 = DEFINITIONAL_REPRESENTATION('',(#111),#115);-#111 = LINE('',#112,#113);-#112 = CARTESIAN_POINT('',(-5.E-02,0.));-#113 = VECTOR('',#114,1.);-#114 = DIRECTION('',(-0.,-1.));-#115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#116 = PCURVE('',#117,#122);-#117 = CYLINDRICAL_SURFACE('',#118,5.E-02);-#118 = AXIS2_PLACEMENT_3D('',#119,#120,#121);-#119 = CARTESIAN_POINT('',(-0.95,0.95,-0.575));-#120 = DIRECTION('',(0.,-1.,0.));-#121 = DIRECTION('',(0.,0.,-1.));+#103 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.575));+#104 = SURFACE_CURVE('',#105,(#108,#114),.PCURVE_S1.);+#105 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#106,#107),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#106 = CARTESIAN_POINT('',(-1.,1.1842101,-0.575));+#107 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.575));+#108 = PCURVE('',#76,#109);+#109 = DEFINITIONAL_REPRESENTATION('',(#110),#113);+#110 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#111,#112),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#111 = CARTESIAN_POINT('',(-5.E-02,-5.E-02));+#112 = CARTESIAN_POINT('',(-5.E-02,-0.9));+#113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#114 = PCURVE('',#115,#122);+#115 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#116,#117)+ ,(#118,#119)+,(#120,#121+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(4.712388980385,6.28318530718),(5.E-02,0.9),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#116 = CARTESIAN_POINT('',(-1.,1.1842101,-0.575));+#117 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.575));+#118 = CARTESIAN_POINT('',(-1.,1.1842101,-0.625));+#119 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.625));+#120 = CARTESIAN_POINT('',(-0.95,1.1842101,-0.625));+#121 = CARTESIAN_POINT('',(-0.95,6.578945E-02,-0.625)); #122 = DEFINITIONAL_REPRESENTATION('',(#123),#127);-#123 = LINE('',#124,#125);-#124 = CARTESIAN_POINT('',(4.712388980385,0.));-#125 = VECTOR('',#126,1.);-#126 = DIRECTION('',(0.,1.));+#123 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#124,#125,#126),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#124 = CARTESIAN_POINT('',(4.712388980385,5.E-02));+#125 = CARTESIAN_POINT('',(4.712388980385,0.475));+#126 = CARTESIAN_POINT('',(4.712388980385,0.9)); #127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #128 = ORIENTED_EDGE('',*,*,#129,.T.); #129 = EDGE_CURVE('',#102,#130,#132,.T.); #130 = VERTEX_POINT('',#131);-#131 = CARTESIAN_POINT('',(-1.,5.E-02,0.575));-#132 = SURFACE_CURVE('',#133,(#137,#144),.PCURVE_S1.);-#133 = LINE('',#134,#135);-#134 = CARTESIAN_POINT('',(-1.,5.E-02,-0.625));-#135 = VECTOR('',#136,1.);-#136 = DIRECTION('',(1.734723475977E-16,-0.,1.));-#137 = PCURVE('',#77,#138);-#138 = DEFINITIONAL_REPRESENTATION('',(#139),#143);-#139 = LINE('',#140,#141);-#140 = CARTESIAN_POINT('',(-0.,-0.9));-#141 = VECTOR('',#142,1.);-#142 = DIRECTION('',(-1.,0.));-#143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#144 = PCURVE('',#145,#150);-#145 = CYLINDRICAL_SURFACE('',#146,5.E-02);-#146 = AXIS2_PLACEMENT_3D('',#147,#148,#149);-#147 = CARTESIAN_POINT('',(-0.95,5.E-02,-0.625));-#148 = DIRECTION('',(1.734723475977E-16,-0.,1.));-#149 = DIRECTION('',(1.,0.,-1.734723475977E-16));+#131 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.575));+#132 = SURFACE_CURVE('',#133,(#136,#142),.PCURVE_S1.);+#133 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#134,#135),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,1.2),.PIECEWISE_BEZIER_KNOTS.);+#134 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.575));+#135 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.575));+#136 = PCURVE('',#76,#137);+#137 = DEFINITIONAL_REPRESENTATION('',(#138),#141);+#138 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#139,#140),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,1.2),.PIECEWISE_BEZIER_KNOTS.);+#139 = CARTESIAN_POINT('',(-5.E-02,-0.9));+#140 = CARTESIAN_POINT('',(-1.2,-0.9));+#141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#142 = PCURVE('',#143,#150);+#143 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#144,#145)+ ,(#146,#147)+,(#148,#149+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(3.14159265359,4.712388980385),(5.E-02,1.2),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#144 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.575));+#145 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.575));+#146 = CARTESIAN_POINT('',(-1.,9.130120270928E-18,-0.575));+#147 = CARTESIAN_POINT('',(-1.,9.130120270928E-18,0.575));+#148 = CARTESIAN_POINT('',(-0.95,0.,-0.575));+#149 = CARTESIAN_POINT('',(-0.95,0.,0.575)); #150 = DEFINITIONAL_REPRESENTATION('',(#151),#155);-#151 = LINE('',#152,#153);-#152 = CARTESIAN_POINT('',(3.14159265359,-1.110223024625E-16));-#153 = VECTOR('',#154,1.);-#154 = DIRECTION('',(0.,1.));+#151 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#152,#153,#154),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(5.E-02,1.2),.PIECEWISE_BEZIER_KNOTS.);+#152 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#153 = CARTESIAN_POINT('',(3.14159265359,0.625));+#154 = CARTESIAN_POINT('',(3.14159265359,1.2)); #155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #156 = ORIENTED_EDGE('',*,*,#157,.T.); #157 = EDGE_CURVE('',#130,#67,#158,.T.);-#158 = SURFACE_CURVE('',#159,(#163,#170),.PCURVE_S1.);-#159 = LINE('',#160,#161);-#160 = CARTESIAN_POINT('',(-1.,0.95,0.575));-#161 = VECTOR('',#162,1.);-#162 = DIRECTION('',(-0.,1.,-0.));-#163 = PCURVE('',#77,#164);-#164 = DEFINITIONAL_REPRESENTATION('',(#165),#169);-#165 = LINE('',#166,#167);-#166 = CARTESIAN_POINT('',(-1.2,0.));-#167 = VECTOR('',#168,1.);-#168 = DIRECTION('',(0.,1.));-#169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#170 = PCURVE('',#171,#176);-#171 = CYLINDRICAL_SURFACE('',#172,5.E-02);-#172 = AXIS2_PLACEMENT_3D('',#173,#174,#175);-#173 = CARTESIAN_POINT('',(-0.95,0.95,0.575));-#174 = DIRECTION('',(0.,-1.,0.));-#175 = DIRECTION('',(0.,0.,-1.));+#158 = SURFACE_CURVE('',#159,(#162,#168),.PCURVE_S1.);+#159 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#160,#161),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#160 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.575));+#161 = CARTESIAN_POINT('',(-1.,1.1842101,0.575));+#162 = PCURVE('',#76,#163);+#163 = DEFINITIONAL_REPRESENTATION('',(#164),#167);+#164 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#165,#166),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#165 = CARTESIAN_POINT('',(-1.2,-0.9));+#166 = CARTESIAN_POINT('',(-1.2,-5.E-02));+#167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#168 = PCURVE('',#169,#176);+#169 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#170,#171)+ ,(#172,#173)+,(#174,#175+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(3.14159265359,4.712388980385),(5.E-02,0.9),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#170 = CARTESIAN_POINT('',(-0.95,1.1842101,0.625));+#171 = CARTESIAN_POINT('',(-0.95,6.578945E-02,0.625));+#172 = CARTESIAN_POINT('',(-1.,1.1842101,0.625));+#173 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.625));+#174 = CARTESIAN_POINT('',(-1.,1.1842101,0.575));+#175 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.575)); #176 = DEFINITIONAL_REPRESENTATION('',(#177),#181);-#177 = LINE('',#178,#179);-#178 = CARTESIAN_POINT('',(4.712388980385,0.));-#179 = VECTOR('',#180,1.);-#180 = DIRECTION('',(0.,-1.));+#177 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#178,#179,#180),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#178 = CARTESIAN_POINT('',(4.712388980385,0.9));+#179 = CARTESIAN_POINT('',(4.712388980385,0.475));+#180 = CARTESIAN_POINT('',(4.712388980385,5.E-02)); #181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#182 = ADVANCED_FACE('',(#183),#197,.F.);+#182 = ADVANCED_FACE('',(#183),#196,.F.); #183 = FACE_BOUND('',#184,.T.); #184 = EDGE_LOOP('',(#185,#220,#248,#276)); #185 = ORIENTED_EDGE('',*,*,#186,.T.); #186 = EDGE_CURVE('',#187,#189,#191,.T.); #187 = VERTEX_POINT('',#188);-#188 = CARTESIAN_POINT('',(-0.95,5.E-02,0.625));+#188 = CARTESIAN_POINT('',(-0.95,6.578945E-02,0.625)); #189 = VERTEX_POINT('',#190);-#190 = CARTESIAN_POINT('',(-0.525,5.E-02,0.625));-#191 = SURFACE_CURVE('',#192,(#196,#208),.PCURVE_S1.);-#192 = LINE('',#193,#194);-#193 = CARTESIAN_POINT('',(-1.,5.E-02,0.625));-#194 = VECTOR('',#195,1.);-#195 = DIRECTION('',(1.,-0.,2.168404344971E-16));-#196 = PCURVE('',#197,#202);-#197 = PLANE('',#198);-#198 = AXIS2_PLACEMENT_3D('',#199,#200,#201);-#199 = CARTESIAN_POINT('',(-1.,0.95,0.625));-#200 = DIRECTION('',(2.168404344971E-16,0.,-1.));-#201 = DIRECTION('',(-1.,0.,-2.168404344971E-16));-#202 = DEFINITIONAL_REPRESENTATION('',(#203),#207);-#203 = LINE('',#204,#205);-#204 = CARTESIAN_POINT('',(-0.,-0.9));-#205 = VECTOR('',#206,1.);-#206 = DIRECTION('',(-1.,0.));-#207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#208 = PCURVE('',#209,#214);-#209 = CYLINDRICAL_SURFACE('',#210,5.E-02);-#210 = AXIS2_PLACEMENT_3D('',#211,#212,#213);-#211 = CARTESIAN_POINT('',(-1.,5.E-02,0.575));-#212 = DIRECTION('',(1.,-0.,2.168404344971E-16));-#213 = DIRECTION('',(2.168404344971E-16,0.,-1.));+#190 = CARTESIAN_POINT('',(-0.525,6.578945E-02,0.625));+#191 = SURFACE_CURVE('',#192,(#195,#206),.PCURVE_S1.);+#192 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#193,#194),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,0.475),.PIECEWISE_BEZIER_KNOTS.);+#193 = CARTESIAN_POINT('',(-0.95,6.578945E-02,0.625));+#194 = CARTESIAN_POINT('',(-0.525,6.578945E-02,0.625));+#195 = PCURVE('',#196,#201);+#196 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#197,#198)+ ,(#199,#200+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-0.475,-5.E-02),(-0.9,+ -5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#197 = CARTESIAN_POINT('',(-0.525,6.578945E-02,0.625));+#198 = CARTESIAN_POINT('',(-0.525,1.1842101,0.625));+#199 = CARTESIAN_POINT('',(-0.95,6.578945E-02,0.625));+#200 = CARTESIAN_POINT('',(-0.95,1.1842101,0.625));+#201 = DEFINITIONAL_REPRESENTATION('',(#202),#205);+#202 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#203,#204),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,0.475),.PIECEWISE_BEZIER_KNOTS.);+#203 = CARTESIAN_POINT('',(-5.E-02,-0.9));+#204 = CARTESIAN_POINT('',(-0.475,-0.9));+#205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#206 = PCURVE('',#207,#214);+#207 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#208,#209)+ ,(#210,#211)+,(#212,#213+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(3.14159265359,4.712388980385),(5.E-02,0.475),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#208 = CARTESIAN_POINT('',(-0.95,6.578945E-02,0.625));+#209 = CARTESIAN_POINT('',(-0.525,6.578945E-02,0.625));+#210 = CARTESIAN_POINT('',(-0.95,9.130120270928E-18,0.625));+#211 = CARTESIAN_POINT('',(-0.525,9.130120270928E-18,0.625));+#212 = CARTESIAN_POINT('',(-0.95,0.,0.575));+#213 = CARTESIAN_POINT('',(-0.525,0.,0.575)); #214 = DEFINITIONAL_REPRESENTATION('',(#215),#219);-#215 = LINE('',#216,#217);-#216 = CARTESIAN_POINT('',(3.14159265359,0.));-#217 = VECTOR('',#218,1.);-#218 = DIRECTION('',(0.,1.));+#215 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#216,#217,#218),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(5.E-02,0.475),.PIECEWISE_BEZIER_KNOTS.);+#216 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#217 = CARTESIAN_POINT('',(3.14159265359,0.2625));+#218 = CARTESIAN_POINT('',(3.14159265359,0.475)); #219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #220 = ORIENTED_EDGE('',*,*,#221,.T.); #221 = EDGE_CURVE('',#189,#222,#224,.T.); #222 = VERTEX_POINT('',#223);-#223 = CARTESIAN_POINT('',(-0.525,0.9,0.625));-#224 = SURFACE_CURVE('',#225,(#229,#236),.PCURVE_S1.);-#225 = LINE('',#226,#227);-#226 = CARTESIAN_POINT('',(-0.525,0.95,0.625));-#227 = VECTOR('',#228,1.);-#228 = DIRECTION('',(-0.,1.,-0.));-#229 = PCURVE('',#197,#230);-#230 = DEFINITIONAL_REPRESENTATION('',(#231),#235);-#231 = LINE('',#232,#233);-#232 = CARTESIAN_POINT('',(-0.475,0.));-#233 = VECTOR('',#234,1.);-#234 = DIRECTION('',(0.,1.));-#235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#236 = PCURVE('',#237,#242);-#237 = CYLINDRICAL_SURFACE('',#238,2.5E-02);-#238 = AXIS2_PLACEMENT_3D('',#239,#240,#241);-#239 = CARTESIAN_POINT('',(-0.525,0.95,0.6));-#240 = DIRECTION('',(0.,-1.,0.));-#241 = DIRECTION('',(0.,0.,-1.));+#223 = CARTESIAN_POINT('',(-0.525,1.1842101,0.625));+#224 = SURFACE_CURVE('',#225,(#228,#234),.PCURVE_S1.);+#225 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#226,#227),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#226 = CARTESIAN_POINT('',(-0.525,6.578945E-02,0.625));+#227 = CARTESIAN_POINT('',(-0.525,1.1842101,0.625));+#228 = PCURVE('',#196,#229);+#229 = DEFINITIONAL_REPRESENTATION('',(#230),#233);+#230 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#231,#232),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#231 = CARTESIAN_POINT('',(-0.475,-0.9));+#232 = CARTESIAN_POINT('',(-0.475,-5.E-02));+#233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#234 = PCURVE('',#235,#242);+#235 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#236,#237)+ ,(#238,#239)+,(#240,#241+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(1.570796326795,3.14159265359),(5.E-02,0.9),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#236 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#237 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#238 = CARTESIAN_POINT('',(-0.5,1.1842101,0.625));+#239 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.625));+#240 = CARTESIAN_POINT('',(-0.525,1.1842101,0.625));+#241 = CARTESIAN_POINT('',(-0.525,6.578945E-02,0.625)); #242 = DEFINITIONAL_REPRESENTATION('',(#243),#247);-#243 = LINE('',#244,#245);-#244 = CARTESIAN_POINT('',(3.14159265359,0.));-#245 = VECTOR('',#246,1.);-#246 = DIRECTION('',(0.,-1.));+#243 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#244,#245,#246),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#244 = CARTESIAN_POINT('',(3.14159265359,0.9));+#245 = CARTESIAN_POINT('',(3.14159265359,0.475));+#246 = CARTESIAN_POINT('',(3.14159265359,5.E-02)); #247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #248 = ORIENTED_EDGE('',*,*,#249,.T.); #249 = EDGE_CURVE('',#222,#250,#252,.T.); #250 = VERTEX_POINT('',#251);-#251 = CARTESIAN_POINT('',(-0.95,0.9,0.625));-#252 = SURFACE_CURVE('',#253,(#257,#264),.PCURVE_S1.);-#253 = LINE('',#254,#255);-#254 = CARTESIAN_POINT('',(-1.,0.9,0.625));-#255 = VECTOR('',#256,1.);-#256 = DIRECTION('',(-1.,-0.,-2.168404344971E-16));-#257 = PCURVE('',#197,#258);-#258 = DEFINITIONAL_REPRESENTATION('',(#259),#263);-#259 = LINE('',#260,#261);-#260 = CARTESIAN_POINT('',(-0.,-5.E-02));-#261 = VECTOR('',#262,1.);-#262 = DIRECTION('',(1.,-0.));-#263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#264 = PCURVE('',#265,#270);-#265 = CYLINDRICAL_SURFACE('',#266,5.E-02);-#266 = AXIS2_PLACEMENT_3D('',#267,#268,#269);-#267 = CARTESIAN_POINT('',(-1.246832498358E-16,0.9,0.575));-#268 = DIRECTION('',(-1.,0.,-2.168404344971E-16));-#269 = DIRECTION('',(-2.168404344971E-16,0.,1.));+#251 = CARTESIAN_POINT('',(-0.95,1.1842101,0.625));+#252 = SURFACE_CURVE('',#253,(#256,#262),.PCURVE_S1.);+#253 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#254,#255),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#254 = CARTESIAN_POINT('',(-0.525,1.1842101,0.625));+#255 = CARTESIAN_POINT('',(-0.95,1.1842101,0.625));+#256 = PCURVE('',#196,#257);+#257 = DEFINITIONAL_REPRESENTATION('',(#258),#261);+#258 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#259,#260),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#259 = CARTESIAN_POINT('',(-0.475,-5.E-02));+#260 = CARTESIAN_POINT('',(-5.E-02,-5.E-02));+#261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#262 = PCURVE('',#263,#270);+#263 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#264,#265)+ ,(#266,#267)+,(#268,#269+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(0.,1.570796326795),(0.525,0.95),.PIECEWISE_BEZIER_KNOTS.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#264 = CARTESIAN_POINT('',(-0.525,1.1842101,0.625));+#265 = CARTESIAN_POINT('',(-0.95,1.1842101,0.625));+#266 = CARTESIAN_POINT('',(-0.525,1.24999955,0.625));+#267 = CARTESIAN_POINT('',(-0.95,1.24999955,0.625));+#268 = CARTESIAN_POINT('',(-0.525,1.24999955,0.575));+#269 = CARTESIAN_POINT('',(-0.95,1.24999955,0.575)); #270 = DEFINITIONAL_REPRESENTATION('',(#271),#275);-#271 = LINE('',#272,#273);-#272 = CARTESIAN_POINT('',(0.,1.));-#273 = VECTOR('',#274,1.);-#274 = DIRECTION('',(0.,1.));+#271 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#272,#273,#274),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#272 = CARTESIAN_POINT('',(0.,0.525));+#273 = CARTESIAN_POINT('',(0.,0.7375));+#274 = CARTESIAN_POINT('',(0.,0.95)); #275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #276 = ORIENTED_EDGE('',*,*,#277,.T.); #277 = EDGE_CURVE('',#250,#187,#278,.T.);-#278 = SURFACE_CURVE('',#279,(#283,#290),.PCURVE_S1.);-#279 = LINE('',#280,#281);-#280 = CARTESIAN_POINT('',(-0.95,0.95,0.625));-#281 = VECTOR('',#282,1.);-#282 = DIRECTION('',(0.,-1.,0.));-#283 = PCURVE('',#197,#284);-#284 = DEFINITIONAL_REPRESENTATION('',(#285),#289);-#285 = LINE('',#286,#287);-#286 = CARTESIAN_POINT('',(-5.E-02,0.));-#287 = VECTOR('',#288,1.);-#288 = DIRECTION('',(-0.,-1.));-#289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#290 = PCURVE('',#171,#291);-#291 = DEFINITIONAL_REPRESENTATION('',(#292),#296);-#292 = LINE('',#293,#294);-#293 = CARTESIAN_POINT('',(3.14159265359,0.));-#294 = VECTOR('',#295,1.);-#295 = DIRECTION('',(0.,1.));-#296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#297 = ADVANCED_FACE('',(#298),#313,.F.);-#298 = FACE_BOUND('',#299,.T.);-#299 = EDGE_LOOP('',(#300,#340,#368,#401,#424,#457,#485,#518));-#300 = ORIENTED_EDGE('',*,*,#301,.T.);-#301 = EDGE_CURVE('',#302,#304,#306,.T.);+#278 = SURFACE_CURVE('',#279,(#282,#288),.PCURVE_S1.);+#279 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#280,#281),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#280 = CARTESIAN_POINT('',(-0.95,1.1842101,0.625));+#281 = CARTESIAN_POINT('',(-0.95,6.578945E-02,0.625));+#282 = PCURVE('',#196,#283);+#283 = DEFINITIONAL_REPRESENTATION('',(#284),#287);+#284 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#285,#286),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#285 = CARTESIAN_POINT('',(-5.E-02,-5.E-02));+#286 = CARTESIAN_POINT('',(-5.E-02,-0.9));+#287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#288 = PCURVE('',#169,#289);+#289 = DEFINITIONAL_REPRESENTATION('',(#290),#294);+#290 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#291,#292,#293),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#291 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#292 = CARTESIAN_POINT('',(3.14159265359,0.475));+#293 = CARTESIAN_POINT('',(3.14159265359,0.9));+#294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#295 = ADVANCED_FACE('',(#296),#310,.F.);+#296 = FACE_BOUND('',#297,.T.);+#297 = EDGE_LOOP('',(#298,#338,#366,#399,#420,#453,#481,#514));+#298 = ORIENTED_EDGE('',*,*,#299,.T.);+#299 = EDGE_CURVE('',#300,#302,#304,.T.);+#300 = VERTEX_POINT('',#301);+#301 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6)); #302 = VERTEX_POINT('',#303);-#303 = CARTESIAN_POINT('',(-0.5,0.9,-0.6));-#304 = VERTEX_POINT('',#305);-#305 = CARTESIAN_POINT('',(-0.5,0.925,-0.575));-#306 = SURFACE_CURVE('',#307,(#312,#328),.PCURVE_S1.);-#307 = CIRCLE('',#308,2.5E-02);-#308 = AXIS2_PLACEMENT_3D('',#309,#310,#311);-#309 = CARTESIAN_POINT('',(-0.5,0.9,-0.575));-#310 = DIRECTION('',(1.,0.,-1.734723475977E-16));-#311 = DIRECTION('',(1.734723475977E-16,0.,1.));-#312 = PCURVE('',#313,#318);-#313 = PLANE('',#314);-#314 = AXIS2_PLACEMENT_3D('',#315,#316,#317);-#315 = CARTESIAN_POINT('',(-0.5,0.95,-0.625));-#316 = DIRECTION('',(-1.,0.,1.734723475977E-16));-#317 = DIRECTION('',(1.734723475977E-16,0.,1.));-#318 = DEFINITIONAL_REPRESENTATION('',(#319),#327);-#319 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#320,#321,#322,#323,#324,#325-,#326),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(- -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,-8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() -RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(- '') );-#320 = CARTESIAN_POINT('',(7.5E-02,-5.E-02));-#321 = CARTESIAN_POINT('',(7.5E-02,-9.330127018922E-02));-#322 = CARTESIAN_POINT('',(3.75E-02,-7.165063509461E-02));-#323 = CARTESIAN_POINT('',(1.387778780781E-17,-5.E-02));-#324 = CARTESIAN_POINT('',(3.75E-02,-2.834936490539E-02));-#325 = CARTESIAN_POINT('',(7.5E-02,-6.698729810778E-03));-#326 = CARTESIAN_POINT('',(7.5E-02,-5.E-02));-#327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#328 = PCURVE('',#329,#334);-#329 = TOROIDAL_SURFACE('',#330,2.5E-02,2.5E-02);-#330 = AXIS2_PLACEMENT_3D('',#331,#332,#333);-#331 = CARTESIAN_POINT('',(-0.525,0.9,-0.575));-#332 = DIRECTION('',(-1.,0.,1.734723475977E-16));-#333 = DIRECTION('',(1.734723475977E-16,0.,1.));-#334 = DEFINITIONAL_REPRESENTATION('',(#335),#339);-#335 = LINE('',#336,#337);-#336 = CARTESIAN_POINT('',(6.28318530718,4.712388980385));-#337 = VECTOR('',#338,1.);-#338 = DIRECTION('',(-1.,0.));-#339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#340 = ORIENTED_EDGE('',*,*,#341,.T.);-#341 = EDGE_CURVE('',#304,#342,#344,.T.);-#342 = VERTEX_POINT('',#343);-#343 = CARTESIAN_POINT('',(-0.5,0.925,0.575));-#344 = SURFACE_CURVE('',#345,(#349,#356),.PCURVE_S1.);-#345 = LINE('',#346,#347);-#346 = CARTESIAN_POINT('',(-0.5,0.925,0.575));-#347 = VECTOR('',#348,1.);-#348 = DIRECTION('',(1.734723475977E-16,-0.,1.));-#349 = PCURVE('',#313,#350);-#350 = DEFINITIONAL_REPRESENTATION('',(#351),#355);-#351 = LINE('',#352,#353);-#352 = CARTESIAN_POINT('',(1.2,-2.5E-02));-#353 = VECTOR('',#354,1.);-#354 = DIRECTION('',(1.,0.));-#355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#356 = PCURVE('',#357,#362);-#357 = CYLINDRICAL_SURFACE('',#358,2.5E-02);-#358 = AXIS2_PLACEMENT_3D('',#359,#360,#361);-#359 = CARTESIAN_POINT('',(-0.525,0.925,9.107298248878E-17));-#360 = DIRECTION('',(1.734723475977E-16,-0.,1.));-#361 = DIRECTION('',(1.,0.,-1.734723475977E-16));-#362 = DEFINITIONAL_REPRESENTATION('',(#363),#367);-#363 = LINE('',#364,#365);+#303 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#304 = SURFACE_CURVE('',#305,(#309,#321),.PCURVE_S1.);+#305 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#306,#307,#308),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#306 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6));+#307 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.6));+#308 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#309 = PCURVE('',#310,#315);+#310 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#311,#312)+ ,(#313,#314+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(2.5E-02,1.225),(-0.925,+ -2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#311 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.6));+#312 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.6));+#313 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.6));+#314 = CARTESIAN_POINT('',(-0.5,1.217104825,0.6));+#315 = DEFINITIONAL_REPRESENTATION('',(#316),#320);+#316 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#317,#318,#319),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#317 = CARTESIAN_POINT('',(2.5E-02,-5.E-02));+#318 = CARTESIAN_POINT('',(2.5E-02,-2.5E-02));+#319 = CARTESIAN_POINT('',(5.E-02,-2.5E-02));+#320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#321 = PCURVE('',#322,#332);+#322 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#323,#324,#325)+ ,(#326,#327,#328)+ ,(#329,#330,#331+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 1.570796326795,3.14159265359),(4.712388980385,6.28318530718),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#323 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#324 = CARTESIAN_POINT('',(-0.5,1.24999955,-0.575));+#325 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.575));+#326 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.6));+#327 = CARTESIAN_POINT('',(-0.5,1.24999955,-0.625));+#328 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.625));+#329 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6));+#330 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.625));+#331 = CARTESIAN_POINT('',(-0.525,1.1842101,-0.625));+#332 = DEFINITIONAL_REPRESENTATION('',(#333),#337);+#333 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#334,#335,#336),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(3.14159265359,4.712388980385),.PIECEWISE_BEZIER_KNOTS.);+#334 = CARTESIAN_POINT('',(3.14159265359,4.712388980385));+#335 = CARTESIAN_POINT('',(2.356194490192,4.712388980385));+#336 = CARTESIAN_POINT('',(1.570796326795,4.712388980385));+#337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#338 = ORIENTED_EDGE('',*,*,#339,.T.);+#339 = EDGE_CURVE('',#302,#340,#342,.T.);+#340 = VERTEX_POINT('',#341);+#341 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#342 = SURFACE_CURVE('',#343,(#346,#352),.PCURVE_S1.);+#343 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#344,#345),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#344 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#345 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#346 = PCURVE('',#310,#347);+#347 = DEFINITIONAL_REPRESENTATION('',(#348),#351);+#348 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#349,#350),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#349 = CARTESIAN_POINT('',(5.E-02,-2.5E-02));+#350 = CARTESIAN_POINT('',(1.2,-2.5E-02));+#351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#352 = PCURVE('',#353,#360);+#353 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#354,#355)+ ,(#356,#357)+,(#358,#359+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(0.,1.570796326795),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#354 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#355 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#356 = CARTESIAN_POINT('',(-0.5,1.24999955,-0.575));+#357 = CARTESIAN_POINT('',(-0.5,1.24999955,0.575));+#358 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.575));+#359 = CARTESIAN_POINT('',(-0.525,1.24999955,0.575));+#360 = DEFINITIONAL_REPRESENTATION('',(#361),#365);+#361 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#362,#363,#364),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#362 = CARTESIAN_POINT('',(0.,-0.575));+#363 = CARTESIAN_POINT('',(0.,1.224510688925E-16)); #364 = CARTESIAN_POINT('',(0.,0.575));-#365 = VECTOR('',#366,1.);-#366 = DIRECTION('',(0.,1.));-#367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#368 = ORIENTED_EDGE('',*,*,#369,.T.);-#369 = EDGE_CURVE('',#342,#370,#372,.T.);-#370 = VERTEX_POINT('',#371);-#371 = CARTESIAN_POINT('',(-0.5,0.9,0.6));-#372 = SURFACE_CURVE('',#373,(#378,#389),.PCURVE_S1.);-#373 = CIRCLE('',#374,2.5E-02);-#374 = AXIS2_PLACEMENT_3D('',#375,#376,#377);-#375 = CARTESIAN_POINT('',(-0.5,0.9,0.575));-#376 = DIRECTION('',(1.,0.,-1.734723475977E-16));-#377 = DIRECTION('',(1.734723475977E-16,0.,1.));-#378 = PCURVE('',#313,#379);-#379 = DEFINITIONAL_REPRESENTATION('',(#380),#388);-#380 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#381,#382,#383,#384,#385,#386-,#387),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(- -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,-8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() -RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(- '') );-#381 = CARTESIAN_POINT('',(1.225,-5.E-02));-#382 = CARTESIAN_POINT('',(1.225,-9.330127018922E-02));-#383 = CARTESIAN_POINT('',(1.1875,-7.165063509461E-02));-#384 = CARTESIAN_POINT('',(1.15,-5.E-02));-#385 = CARTESIAN_POINT('',(1.1875,-2.834936490539E-02));-#386 = CARTESIAN_POINT('',(1.225,-6.698729810778E-03));-#387 = CARTESIAN_POINT('',(1.225,-5.E-02));-#388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#389 = PCURVE('',#390,#395);-#390 = TOROIDAL_SURFACE('',#391,2.5E-02,2.5E-02);-#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394);-#392 = CARTESIAN_POINT('',(-0.525,0.9,0.575));-#393 = DIRECTION('',(-1.,0.,1.734723475977E-16));-#394 = DIRECTION('',(1.734723475977E-16,0.,1.));-#395 = DEFINITIONAL_REPRESENTATION('',(#396),#400);-#396 = LINE('',#397,#398);-#397 = CARTESIAN_POINT('',(6.28318530718,4.712388980385));-#398 = VECTOR('',#399,1.);-#399 = DIRECTION('',(-1.,0.));-#400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#401 = ORIENTED_EDGE('',*,*,#402,.T.);-#402 = EDGE_CURVE('',#370,#403,#405,.T.);-#403 = VERTEX_POINT('',#404);-#404 = CARTESIAN_POINT('',(-0.5,5.E-02,0.6));-#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);-#406 = LINE('',#407,#408);-#407 = CARTESIAN_POINT('',(-0.5,0.95,0.6));-#408 = VECTOR('',#409,1.);-#409 = DIRECTION('',(0.,-1.,0.));-#410 = PCURVE('',#313,#411);-#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);-#412 = LINE('',#413,#414);-#413 = CARTESIAN_POINT('',(1.225,0.));-#414 = VECTOR('',#415,1.);-#415 = DIRECTION('',(0.,-1.));-#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#417 = PCURVE('',#237,#418);-#418 = DEFINITIONAL_REPRESENTATION('',(#419),#423);-#419 = LINE('',#420,#421);-#420 = CARTESIAN_POINT('',(1.570796326795,0.));-#421 = VECTOR('',#422,1.);-#422 = DIRECTION('',(0.,1.));-#423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#424 = ORIENTED_EDGE('',*,*,#425,.T.);-#425 = EDGE_CURVE('',#403,#426,#428,.T.);-#426 = VERTEX_POINT('',#427);-#427 = CARTESIAN_POINT('',(-0.5,2.5E-02,0.575));-#428 = SURFACE_CURVE('',#429,(#434,#445),.PCURVE_S1.);-#429 = CIRCLE('',#430,2.5E-02);-#430 = AXIS2_PLACEMENT_3D('',#431,#432,#433);-#431 = CARTESIAN_POINT('',(-0.5,5.E-02,0.575));-#432 = DIRECTION('',(1.,0.,-1.734723475977E-16));-#433 = DIRECTION('',(1.734723475977E-16,0.,1.));-#434 = PCURVE('',#313,#435);-#435 = DEFINITIONAL_REPRESENTATION('',(#436),#444);-#436 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#437,#438,#439,#440,#441,#442-,#443),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(- -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,-8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() -RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(- '') );-#437 = CARTESIAN_POINT('',(1.225,-0.9));-#438 = CARTESIAN_POINT('',(1.225,-0.943301270189));-#439 = CARTESIAN_POINT('',(1.1875,-0.921650635095));-#440 = CARTESIAN_POINT('',(1.15,-0.9));-#441 = CARTESIAN_POINT('',(1.1875,-0.878349364905));-#442 = CARTESIAN_POINT('',(1.225,-0.856698729811));-#443 = CARTESIAN_POINT('',(1.225,-0.9));-#444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#445 = PCURVE('',#446,#451);-#446 = TOROIDAL_SURFACE('',#447,2.5E-02,2.5E-02);-#447 = AXIS2_PLACEMENT_3D('',#448,#449,#450);-#448 = CARTESIAN_POINT('',(-0.525,5.E-02,0.575));-#449 = DIRECTION('',(-1.,0.,1.734723475977E-16));-#450 = DIRECTION('',(1.734723475977E-16,0.,1.));-#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);-#452 = LINE('',#453,#454);-#453 = CARTESIAN_POINT('',(6.28318530718,4.712388980385));-#454 = VECTOR('',#455,1.);-#455 = DIRECTION('',(-1.,1.130863886743E-15));-#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#457 = ORIENTED_EDGE('',*,*,#458,.T.);-#458 = EDGE_CURVE('',#426,#459,#461,.T.);-#459 = VERTEX_POINT('',#460);-#460 = CARTESIAN_POINT('',(-0.5,2.5E-02,-0.575));-#461 = SURFACE_CURVE('',#462,(#466,#473),.PCURVE_S1.);-#462 = LINE('',#463,#464);-#463 = CARTESIAN_POINT('',(-0.5,2.5E-02,-0.625));-#464 = VECTOR('',#465,1.);-#465 = DIRECTION('',(-1.734723475977E-16,0.,-1.));-#466 = PCURVE('',#313,#467);-#467 = DEFINITIONAL_REPRESENTATION('',(#468),#472);-#468 = LINE('',#469,#470);-#469 = CARTESIAN_POINT('',(0.,-0.925));-#470 = VECTOR('',#471,1.);-#471 = DIRECTION('',(-1.,0.));-#472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#473 = PCURVE('',#474,#479);-#474 = CYLINDRICAL_SURFACE('',#475,2.5E-02);-#475 = AXIS2_PLACEMENT_3D('',#476,#477,#478);-#476 = CARTESIAN_POINT('',(-0.525,2.5E-02,-0.625));-#477 = DIRECTION('',(-1.734723475977E-16,0.,-1.));-#478 = DIRECTION('',(-1.,0.,1.734723475977E-16));-#479 = DEFINITIONAL_REPRESENTATION('',(#480),#484);-#480 = LINE('',#481,#482);-#481 = CARTESIAN_POINT('',(3.14159265359,0.));-#482 = VECTOR('',#483,1.);-#483 = DIRECTION('',(0.,1.));-#484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#485 = ORIENTED_EDGE('',*,*,#486,.T.);-#486 = EDGE_CURVE('',#459,#487,#489,.T.);-#487 = VERTEX_POINT('',#488);-#488 = CARTESIAN_POINT('',(-0.5,5.E-02,-0.6));-#489 = SURFACE_CURVE('',#490,(#495,#506),.PCURVE_S1.);-#490 = CIRCLE('',#491,2.5E-02);-#491 = AXIS2_PLACEMENT_3D('',#492,#493,#494);-#492 = CARTESIAN_POINT('',(-0.5,5.E-02,-0.575));-#493 = DIRECTION('',(1.,0.,-1.734723475977E-16));-#494 = DIRECTION('',(1.734723475977E-16,0.,1.));-#495 = PCURVE('',#313,#496);-#496 = DEFINITIONAL_REPRESENTATION('',(#497),#505);-#497 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#498,#499,#500,#501,#502,#503-,#504),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(- -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,-8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() -RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(- '') );-#498 = CARTESIAN_POINT('',(7.5E-02,-0.9));-#499 = CARTESIAN_POINT('',(7.5E-02,-0.943301270189));-#500 = CARTESIAN_POINT('',(3.75E-02,-0.921650635095));-#501 = CARTESIAN_POINT('',(1.387778780781E-17,-0.9));-#502 = CARTESIAN_POINT('',(3.75E-02,-0.878349364905));-#503 = CARTESIAN_POINT('',(7.5E-02,-0.856698729811));-#504 = CARTESIAN_POINT('',(7.5E-02,-0.9));-#505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#506 = PCURVE('',#507,#512);-#507 = TOROIDAL_SURFACE('',#508,2.5E-02,2.5E-02);-#508 = AXIS2_PLACEMENT_3D('',#509,#510,#511);-#509 = CARTESIAN_POINT('',(-0.525,5.E-02,-0.575));-#510 = DIRECTION('',(-1.,0.,1.734723475977E-16));-#511 = DIRECTION('',(1.734723475977E-16,0.,1.));-#512 = DEFINITIONAL_REPRESENTATION('',(#513),#517);-#513 = LINE('',#514,#515);-#514 = CARTESIAN_POINT('',(6.28318530718,4.712388980385));-#515 = VECTOR('',#516,1.);-#516 = DIRECTION('',(-1.,-1.130863886743E-15));-#517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#518 = ORIENTED_EDGE('',*,*,#519,.T.);-#519 = EDGE_CURVE('',#487,#302,#520,.T.);-#520 = SURFACE_CURVE('',#521,(#525,#532),.PCURVE_S1.);-#521 = LINE('',#522,#523);-#522 = CARTESIAN_POINT('',(-0.5,0.95,-0.6));-#523 = VECTOR('',#524,1.);-#524 = DIRECTION('',(-0.,1.,-0.));-#525 = PCURVE('',#313,#526);-#526 = DEFINITIONAL_REPRESENTATION('',(#527),#531);-#527 = LINE('',#528,#529);-#528 = CARTESIAN_POINT('',(2.5E-02,0.));-#529 = VECTOR('',#530,1.);-#530 = DIRECTION('',(0.,1.));-#531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#532 = PCURVE('',#533,#538);-#533 = CYLINDRICAL_SURFACE('',#534,2.5E-02);-#534 = AXIS2_PLACEMENT_3D('',#535,#536,#537);-#535 = CARTESIAN_POINT('',(-0.525,0.95,-0.6));-#536 = DIRECTION('',(0.,-1.,0.));-#537 = DIRECTION('',(0.,0.,-1.));-#538 = DEFINITIONAL_REPRESENTATION('',(#539),#543);-#539 = LINE('',#540,#541);-#540 = CARTESIAN_POINT('',(1.570796326795,0.));-#541 = VECTOR('',#542,1.);-#542 = DIRECTION('',(0.,-1.));-#543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#544 = ADVANCED_FACE('',(#545),#559,.F.);-#545 = FACE_BOUND('',#546,.T.);-#546 = EDGE_LOOP('',(#547,#582,#605,#633));-#547 = ORIENTED_EDGE('',*,*,#548,.T.);-#548 = EDGE_CURVE('',#549,#551,#553,.T.);-#549 = VERTEX_POINT('',#550);-#550 = CARTESIAN_POINT('',(-0.95,0.9,-0.625));-#551 = VERTEX_POINT('',#552);-#552 = CARTESIAN_POINT('',(-0.525,0.9,-0.625));-#553 = SURFACE_CURVE('',#554,(#558,#570),.PCURVE_S1.);-#554 = LINE('',#555,#556);-#555 = CARTESIAN_POINT('',(-0.5,0.9,-0.625));-#556 = VECTOR('',#557,1.);-#557 = DIRECTION('',(1.,-0.,-0.));-#558 = PCURVE('',#559,#564);-#559 = PLANE('',#560);-#560 = AXIS2_PLACEMENT_3D('',#561,#562,#563);-#561 = CARTESIAN_POINT('',(-1.,0.95,-0.625));-#562 = DIRECTION('',(0.,0.,1.));-#563 = DIRECTION('',(1.,0.,-0.));-#564 = DEFINITIONAL_REPRESENTATION('',(#565),#569);-#565 = LINE('',#566,#567);-#566 = CARTESIAN_POINT('',(0.5,-5.E-02));-#567 = VECTOR('',#568,1.);-#568 = DIRECTION('',(1.,-0.));-#569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#570 = PCURVE('',#571,#576);-#571 = CYLINDRICAL_SURFACE('',#572,5.E-02);-#572 = AXIS2_PLACEMENT_3D('',#573,#574,#575);-#573 = CARTESIAN_POINT('',(0.,0.9,-0.575));-#574 = DIRECTION('',(1.,0.,0.));-#575 = DIRECTION('',(0.,0.,-1.));-#576 = DEFINITIONAL_REPRESENTATION('',(#577),#581);-#577 = LINE('',#578,#579);-#578 = CARTESIAN_POINT('',(0.,-0.5));-#579 = VECTOR('',#580,1.);-#580 = DIRECTION('',(0.,1.));-#581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#582 = ORIENTED_EDGE('',*,*,#583,.T.);-#583 = EDGE_CURVE('',#551,#584,#586,.T.);-#584 = VERTEX_POINT('',#585);-#585 = CARTESIAN_POINT('',(-0.525,5.E-02,-0.625));-#586 = SURFACE_CURVE('',#587,(#591,#598),.PCURVE_S1.);-#587 = LINE('',#588,#589);-#588 = CARTESIAN_POINT('',(-0.525,0.95,-0.625));-#589 = VECTOR('',#590,1.);-#590 = DIRECTION('',(0.,-1.,0.));-#591 = PCURVE('',#559,#592);-#592 = DEFINITIONAL_REPRESENTATION('',(#593),#597);-#593 = LINE('',#594,#595);-#594 = CARTESIAN_POINT('',(0.475,0.));-#595 = VECTOR('',#596,1.);-#596 = DIRECTION('',(0.,-1.));-#597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#598 = PCURVE('',#533,#599);-#599 = DEFINITIONAL_REPRESENTATION('',(#600),#604);-#600 = LINE('',#601,#602);-#601 = CARTESIAN_POINT('',(0.,0.));-#602 = VECTOR('',#603,1.);-#603 = DIRECTION('',(0.,1.));-#604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#605 = ORIENTED_EDGE('',*,*,#606,.T.);-#606 = EDGE_CURVE('',#584,#607,#609,.T.);-#607 = VERTEX_POINT('',#608);-#608 = CARTESIAN_POINT('',(-0.95,5.E-02,-0.625));-#609 = SURFACE_CURVE('',#610,(#614,#621),.PCURVE_S1.);-#610 = LINE('',#611,#612);-#611 = CARTESIAN_POINT('',(-1.,5.E-02,-0.625));-#612 = VECTOR('',#613,1.);-#613 = DIRECTION('',(-1.,0.,0.));-#614 = PCURVE('',#559,#615);-#615 = DEFINITIONAL_REPRESENTATION('',(#616),#620);-#616 = LINE('',#617,#618);-#617 = CARTESIAN_POINT('',(0.,-0.9));-#618 = VECTOR('',#619,1.);-#619 = DIRECTION('',(-1.,0.));-#620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#621 = PCURVE('',#622,#627);-#622 = CYLINDRICAL_SURFACE('',#623,5.E-02);-#623 = AXIS2_PLACEMENT_3D('',#624,#625,#626);-#624 = CARTESIAN_POINT('',(-1.,5.E-02,-0.575));-#625 = DIRECTION('',(-1.,0.,0.));-#626 = DIRECTION('',(0.,0.,1.));-#627 = DEFINITIONAL_REPRESENTATION('',(#628),#632);-#628 = LINE('',#629,#630);-#629 = CARTESIAN_POINT('',(3.14159265359,0.));-#630 = VECTOR('',#631,1.);-#631 = DIRECTION('',(0.,1.));-#632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#633 = ORIENTED_EDGE('',*,*,#634,.T.);-#634 = EDGE_CURVE('',#607,#549,#635,.T.);-#635 = SURFACE_CURVE('',#636,(#640,#647),.PCURVE_S1.);-#636 = LINE('',#637,#638);-#637 = CARTESIAN_POINT('',(-0.95,0.95,-0.625));-#638 = VECTOR('',#639,1.);-#639 = DIRECTION('',(-0.,1.,-0.));-#640 = PCURVE('',#559,#641);-#641 = DEFINITIONAL_REPRESENTATION('',(#642),#646);-#642 = LINE('',#643,#644);-#643 = CARTESIAN_POINT('',(5.E-02,0.));-#644 = VECTOR('',#645,1.);-#645 = DIRECTION('',(0.,1.));-#646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#647 = PCURVE('',#117,#648);-#648 = DEFINITIONAL_REPRESENTATION('',(#649),#653);-#649 = LINE('',#650,#651);-#650 = CARTESIAN_POINT('',(6.28318530718,0.));-#651 = VECTOR('',#652,1.);-#652 = DIRECTION('',(0.,-1.));-#653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#654 = ADVANCED_FACE('',(#655),#669,.T.);-#655 = FACE_BOUND('',#656,.T.);-#656 = EDGE_LOOP('',(#657,#687,#710,#733));-#657 = ORIENTED_EDGE('',*,*,#658,.T.);-#658 = EDGE_CURVE('',#659,#661,#663,.T.);-#659 = VERTEX_POINT('',#660);-#660 = CARTESIAN_POINT('',(-0.95,0.95,0.575));-#661 = VERTEX_POINT('',#662);-#662 = CARTESIAN_POINT('',(-0.525,0.95,0.575));-#663 = SURFACE_CURVE('',#664,(#668,#680),.PCURVE_S1.);-#664 = LINE('',#665,#666);-#665 = CARTESIAN_POINT('',(-0.5,0.95,0.575));-#666 = VECTOR('',#667,1.);-#667 = DIRECTION('',(1.,-0.,2.168404344971E-16));-#668 = PCURVE('',#669,#674);-#669 = PLANE('',#670);-#670 = AXIS2_PLACEMENT_3D('',#671,#672,#673);-#671 = CARTESIAN_POINT('',(0.,0.95,0.));-#672 = DIRECTION('',(0.,1.,0.));-#673 = DIRECTION('',(0.,-0.,1.));-#674 = DEFINITIONAL_REPRESENTATION('',(#675),#679);-#675 = LINE('',#676,#677);-#676 = CARTESIAN_POINT('',(0.575,-0.5));-#677 = VECTOR('',#678,1.);-#678 = DIRECTION('',(2.168404344971E-16,1.));-#679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#680 = PCURVE('',#265,#681);-#681 = DEFINITIONAL_REPRESENTATION('',(#682),#686);-#682 = LINE('',#683,#684);-#683 = CARTESIAN_POINT('',(1.570796326795,0.5));-#684 = VECTOR('',#685,1.);-#685 = DIRECTION('',(0.,-1.));-#686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#687 = ORIENTED_EDGE('',*,*,#688,.T.);-#688 = EDGE_CURVE('',#661,#689,#691,.T.);-#689 = VERTEX_POINT('',#690);-#690 = CARTESIAN_POINT('',(-0.525,0.95,-0.575));-#691 = SURFACE_CURVE('',#692,(#696,#703),.PCURVE_S1.);-#692 = LINE('',#693,#694);-#693 = CARTESIAN_POINT('',(-0.525,0.95,-0.575));-#694 = VECTOR('',#695,1.);-#695 = DIRECTION('',(-1.734723475977E-16,0.,-1.));-#696 = PCURVE('',#669,#697);-#697 = DEFINITIONAL_REPRESENTATION('',(#698),#702);-#698 = LINE('',#699,#700);-#699 = CARTESIAN_POINT('',(-0.575,-0.525));-#700 = VECTOR('',#701,1.);-#701 = DIRECTION('',(-1.,-1.734723475977E-16));-#702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#703 = PCURVE('',#357,#704);-#704 = DEFINITIONAL_REPRESENTATION('',(#705),#709);-#705 = LINE('',#706,#707);-#706 = CARTESIAN_POINT('',(1.570796326795,-0.575));-#707 = VECTOR('',#708,1.);-#708 = DIRECTION('',(0.,-1.));-#709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#710 = ORIENTED_EDGE('',*,*,#711,.T.);-#711 = EDGE_CURVE('',#689,#712,#714,.T.);-#712 = VERTEX_POINT('',#713);-#713 = CARTESIAN_POINT('',(-0.95,0.95,-0.575));-#714 = SURFACE_CURVE('',#715,(#719,#726),.PCURVE_S1.);-#715 = LINE('',#716,#717);-#716 = CARTESIAN_POINT('',(-1.,0.95,-0.575));-#717 = VECTOR('',#718,1.);-#718 = DIRECTION('',(-1.,0.,0.));-#719 = PCURVE('',#669,#720);-#720 = DEFINITIONAL_REPRESENTATION('',(#721),#725);-#721 = LINE('',#722,#723);-#722 = CARTESIAN_POINT('',(-0.575,-1.));-#723 = VECTOR('',#724,1.);-#724 = DIRECTION('',(0.,-1.));-#725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#726 = PCURVE('',#571,#727);-#727 = DEFINITIONAL_REPRESENTATION('',(#728),#732);-#728 = LINE('',#729,#730);-#729 = CARTESIAN_POINT('',(1.570796326795,-1.));-#730 = VECTOR('',#731,1.);-#731 = DIRECTION('',(0.,-1.));-#732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#733 = ORIENTED_EDGE('',*,*,#734,.T.);-#734 = EDGE_CURVE('',#712,#659,#735,.T.);-#735 = SURFACE_CURVE('',#736,(#740,#747),.PCURVE_S1.);-#736 = LINE('',#737,#738);-#737 = CARTESIAN_POINT('',(-0.95,0.95,0.625));-#738 = VECTOR('',#739,1.);-#739 = DIRECTION('',(1.734723475977E-16,-0.,1.));-#740 = PCURVE('',#669,#741);-#741 = DEFINITIONAL_REPRESENTATION('',(#742),#746);-#742 = LINE('',#743,#744);-#743 = CARTESIAN_POINT('',(0.625,-0.95));-#744 = VECTOR('',#745,1.);-#745 = DIRECTION('',(1.,1.734723475977E-16));-#746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#747 = PCURVE('',#89,#748);-#748 = DEFINITIONAL_REPRESENTATION('',(#749),#753);-#749 = LINE('',#750,#751);-#750 = CARTESIAN_POINT('',(1.570796326795,-0.625));-#751 = VECTOR('',#752,1.);-#752 = DIRECTION('',(0.,-1.));-#753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#754 = ADVANCED_FACE('',(#755),#769,.F.);-#755 = FACE_BOUND('',#756,.T.);-#756 = EDGE_LOOP('',(#757,#787,#810,#833));-#757 = ORIENTED_EDGE('',*,*,#758,.T.);-#758 = EDGE_CURVE('',#759,#761,#763,.T.);-#759 = VERTEX_POINT('',#760);-#760 = CARTESIAN_POINT('',(-0.95,0.,-0.575));-#761 = VERTEX_POINT('',#762);-#762 = CARTESIAN_POINT('',(-0.525,0.,-0.575));-#763 = SURFACE_CURVE('',#764,(#768,#780),.PCURVE_S1.);-#764 = LINE('',#765,#766);-#765 = CARTESIAN_POINT('',(0.,0.,-0.575));-#766 = VECTOR('',#767,1.);-#767 = DIRECTION('',(1.,-0.,-0.));-#768 = PCURVE('',#769,#774);-#769 = PLANE('',#770);-#770 = AXIS2_PLACEMENT_3D('',#771,#772,#773);-#771 = CARTESIAN_POINT('',(0.,0.,0.));-#772 = DIRECTION('',(0.,1.,0.));-#773 = DIRECTION('',(0.,-0.,1.));-#774 = DEFINITIONAL_REPRESENTATION('',(#775),#779);-#775 = LINE('',#776,#777);-#776 = CARTESIAN_POINT('',(-0.575,0.));-#777 = VECTOR('',#778,1.);-#778 = DIRECTION('',(0.,1.));-#779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#780 = PCURVE('',#622,#781);-#781 = DEFINITIONAL_REPRESENTATION('',(#782),#786);-#782 = LINE('',#783,#784);-#783 = CARTESIAN_POINT('',(4.712388980385,-1.));-#784 = VECTOR('',#785,1.);-#785 = DIRECTION('',(0.,-1.));-#786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#787 = ORIENTED_EDGE('',*,*,#788,.T.);-#788 = EDGE_CURVE('',#761,#789,#791,.T.);-#789 = VERTEX_POINT('',#790);-#790 = CARTESIAN_POINT('',(-0.525,0.,0.575));-#791 = SURFACE_CURVE('',#792,(#796,#803),.PCURVE_S1.);-#792 = LINE('',#793,#794);-#793 = CARTESIAN_POINT('',(-0.525,0.,9.107298248878E-17));-#794 = VECTOR('',#795,1.);-#795 = DIRECTION('',(1.734723475977E-16,-0.,1.));-#796 = PCURVE('',#769,#797);-#797 = DEFINITIONAL_REPRESENTATION('',(#798),#802);-#798 = LINE('',#799,#800);-#799 = CARTESIAN_POINT('',(9.107298248878E-17,-0.525));-#800 = VECTOR('',#801,1.);-#801 = DIRECTION('',(1.,1.734723475977E-16));-#802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#803 = PCURVE('',#474,#804);-#804 = DEFINITIONAL_REPRESENTATION('',(#805),#809);-#805 = LINE('',#806,#807);-#806 = CARTESIAN_POINT('',(4.712388980385,-0.625));-#807 = VECTOR('',#808,1.);-#808 = DIRECTION('',(0.,-1.));-#809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#810 = ORIENTED_EDGE('',*,*,#811,.T.);-#811 = EDGE_CURVE('',#789,#812,#814,.T.);-#812 = VERTEX_POINT('',#813);-#813 = CARTESIAN_POINT('',(-0.95,0.,0.575));-#814 = SURFACE_CURVE('',#815,(#819,#826),.PCURVE_S1.);-#815 = LINE('',#816,#817);-#816 = CARTESIAN_POINT('',(-1.246832498358E-16,0.,0.575));-#817 = VECTOR('',#818,1.);-#818 = DIRECTION('',(-1.,0.,-2.168404344971E-16));-#819 = PCURVE('',#769,#820);-#820 = DEFINITIONAL_REPRESENTATION('',(#821),#825);-#821 = LINE('',#822,#823);-#822 = CARTESIAN_POINT('',(0.575,-1.246832498358E-16));-#823 = VECTOR('',#824,1.);-#824 = DIRECTION('',(-2.168404344971E-16,-1.));-#825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#826 = PCURVE('',#209,#827);-#827 = DEFINITIONAL_REPRESENTATION('',(#828),#832);-#828 = LINE('',#829,#830);-#829 = CARTESIAN_POINT('',(4.712388980385,1.));-#830 = VECTOR('',#831,1.);-#831 = DIRECTION('',(0.,-1.));-#832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#833 = ORIENTED_EDGE('',*,*,#834,.T.);-#834 = EDGE_CURVE('',#812,#759,#835,.T.);-#835 = SURFACE_CURVE('',#836,(#840,#847),.PCURVE_S1.);-#836 = LINE('',#837,#838);-#837 = CARTESIAN_POINT('',(-0.95,0.,1.647987302178E-16));-#838 = VECTOR('',#839,1.);-#839 = DIRECTION('',(-1.734723475977E-16,0.,-1.));-#840 = PCURVE('',#769,#841);-#841 = DEFINITIONAL_REPRESENTATION('',(#842),#846);-#842 = LINE('',#843,#844);-#843 = CARTESIAN_POINT('',(1.647987302178E-16,-0.95));-#844 = VECTOR('',#845,1.);-#845 = DIRECTION('',(-1.,-1.734723475977E-16));-#846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#847 = PCURVE('',#145,#848);-#848 = DEFINITIONAL_REPRESENTATION('',(#849),#853);-#849 = LINE('',#850,#851);-#850 = CARTESIAN_POINT('',(4.712388980385,0.625));-#851 = VECTOR('',#852,1.);-#852 = DIRECTION('',(0.,-1.));-#853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#854 = ADVANCED_FACE('',(#855),#265,.T.);-#855 = FACE_BOUND('',#856,.T.);-#856 = EDGE_LOOP('',(#857,#858,#880,#881));-#857 = ORIENTED_EDGE('',*,*,#249,.F.);-#858 = ORIENTED_EDGE('',*,*,#859,.T.);-#859 = EDGE_CURVE('',#222,#661,#860,.T.);-#860 = SURFACE_CURVE('',#861,(#866,#873),.PCURVE_S1.);-#861 = CIRCLE('',#862,5.E-02);-#862 = AXIS2_PLACEMENT_3D('',#863,#864,#865);-#863 = CARTESIAN_POINT('',(-0.525,0.9,0.575));-#864 = DIRECTION('',(-1.,0.,1.734723475977E-16));-#865 = DIRECTION('',(1.734723475977E-16,0.,1.));-#866 = PCURVE('',#265,#867);-#867 = DEFINITIONAL_REPRESENTATION('',(#868),#872);-#868 = LINE('',#869,#870);-#869 = CARTESIAN_POINT('',(0.,0.525));-#870 = VECTOR('',#871,1.);-#871 = DIRECTION('',(1.,0.));-#872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#873 = PCURVE('',#390,#874);-#874 = DEFINITIONAL_REPRESENTATION('',(#875),#879);-#875 = LINE('',#876,#877);-#876 = CARTESIAN_POINT('',(0.,6.28318530718));-#877 = VECTOR('',#878,1.);-#878 = DIRECTION('',(1.,0.));-#879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#880 = ORIENTED_EDGE('',*,*,#658,.F.);-#881 = ORIENTED_EDGE('',*,*,#882,.F.);-#882 = EDGE_CURVE('',#250,#659,#883,.T.);-#883 = SURFACE_CURVE('',#884,(#889,#896),.PCURVE_S1.);-#884 = CIRCLE('',#885,5.E-02);-#885 = AXIS2_PLACEMENT_3D('',#886,#887,#888);-#886 = CARTESIAN_POINT('',(-0.95,0.9,0.575));-#887 = DIRECTION('',(-1.,0.,0.));-#888 = DIRECTION('',(0.,0.,1.));-#889 = PCURVE('',#265,#890);-#890 = DEFINITIONAL_REPRESENTATION('',(#891),#895);-#891 = LINE('',#892,#893);-#892 = CARTESIAN_POINT('',(0.,0.95));-#893 = VECTOR('',#894,1.);-#894 = DIRECTION('',(1.,0.));-#895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#896 = PCURVE('',#897,#902);-#897 = SPHERICAL_SURFACE('',#898,5.E-02);-#898 = AXIS2_PLACEMENT_3D('',#899,#900,#901);-#899 = CARTESIAN_POINT('',(-0.95,0.9,0.575));-#900 = DIRECTION('',(0.,1.,0.));-#901 = DIRECTION('',(1.,0.,0.));-#902 = DEFINITIONAL_REPRESENTATION('',(#903),#929);-#903 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#904,#905,#906,#907,#908,#909,- #910,#911,#912,#913,#914,#915,#916,#917,#918,#919,#920,#921,#922,- #923,#924,#925,#926,#927,#928),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,- 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.139983303613E-02,- 0.142799666072,0.214199499108,0.285599332145,0.356999165181,- 0.428398998217,0.499798831253,0.571198664289,0.642598497325,- 0.713998330361,0.785398163397,0.856797996434,0.92819782947,- 0.999597662506,1.070997495542,1.142397328578,1.213797161614,- 1.28519699465,1.356596827687,1.427996660723,1.499396493759,- 1.570796326795),.UNSPECIFIED.);-#904 = CARTESIAN_POINT('',(4.712388980385,0.));-#905 = CARTESIAN_POINT('',(4.712388980385,2.379994434538E-02));-#906 = CARTESIAN_POINT('',(4.712388980385,7.139983303613E-02));-#907 = CARTESIAN_POINT('',(4.712388980385,0.142799666072));-#908 = CARTESIAN_POINT('',(4.712388980385,0.214199499108));-#909 = CARTESIAN_POINT('',(4.712388980385,0.285599332145));-#910 = CARTESIAN_POINT('',(4.712388980385,0.356999165181));-#911 = CARTESIAN_POINT('',(4.712388980385,0.428398998217));-#912 = CARTESIAN_POINT('',(4.712388980385,0.499798831253));-#913 = CARTESIAN_POINT('',(4.712388980385,0.571198664289));-#914 = CARTESIAN_POINT('',(4.712388980385,0.642598497325));-#915 = CARTESIAN_POINT('',(4.712388980385,0.713998330361));-#916 = CARTESIAN_POINT('',(4.712388980385,0.785398163397));-#917 = CARTESIAN_POINT('',(4.712388980385,0.856797996434));-#918 = CARTESIAN_POINT('',(4.712388980385,0.92819782947));-#919 = CARTESIAN_POINT('',(4.712388980385,0.999597662506));-#920 = CARTESIAN_POINT('',(4.712388980385,1.070997495542));-#921 = CARTESIAN_POINT('',(4.712388980385,1.142397328578));-#922 = CARTESIAN_POINT('',(4.712388980385,1.213797161614));-#923 = CARTESIAN_POINT('',(4.712388980385,1.28519699465));-#924 = CARTESIAN_POINT('',(4.712388980385,1.356596827687));-#925 = CARTESIAN_POINT('',(4.712388980385,1.427996660723));-#926 = CARTESIAN_POINT('',(4.712388980385,1.499396493759));-#927 = CARTESIAN_POINT('',(4.712388980385,1.54699638245));-#928 = CARTESIAN_POINT('',(4.712388980385,1.570796326795));-#929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#930 = ADVANCED_FACE('',(#931),#171,.T.);-#931 = FACE_BOUND('',#932,.T.);-#932 = EDGE_LOOP('',(#933,#960,#961,#983));-#933 = ORIENTED_EDGE('',*,*,#934,.F.);-#934 = EDGE_CURVE('',#187,#130,#935,.T.);-#935 = SURFACE_CURVE('',#936,(#941,#948),.PCURVE_S1.);-#936 = CIRCLE('',#937,5.E-02);-#937 = AXIS2_PLACEMENT_3D('',#938,#939,#940);-#938 = CARTESIAN_POINT('',(-0.95,5.E-02,0.575));-#939 = DIRECTION('',(0.,-1.,0.));-#940 = DIRECTION('',(0.,0.,-1.));-#941 = PCURVE('',#171,#942);-#942 = DEFINITIONAL_REPRESENTATION('',(#943),#947);-#943 = LINE('',#944,#945);-#944 = CARTESIAN_POINT('',(0.,0.9));-#945 = VECTOR('',#946,1.);-#946 = DIRECTION('',(1.,0.));-#947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#948 = PCURVE('',#949,#954);-#949 = SPHERICAL_SURFACE('',#950,5.E-02);-#950 = AXIS2_PLACEMENT_3D('',#951,#952,#953);-#951 = CARTESIAN_POINT('',(-0.95,5.E-02,0.575));-#952 = DIRECTION('',(0.,1.,0.));-#953 = DIRECTION('',(1.,0.,0.));-#954 = DEFINITIONAL_REPRESENTATION('',(#955),#959);-#955 = LINE('',#956,#957);-#956 = CARTESIAN_POINT('',(7.853981633974,4.163336342344E-16));-#957 = VECTOR('',#958,1.);-#958 = DIRECTION('',(-1.,0.));-#959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#960 = ORIENTED_EDGE('',*,*,#277,.F.);-#961 = ORIENTED_EDGE('',*,*,#962,.F.);-#962 = EDGE_CURVE('',#67,#250,#963,.T.);-#963 = SURFACE_CURVE('',#964,(#969,#976),.PCURVE_S1.);-#964 = CIRCLE('',#965,5.E-02);-#965 = AXIS2_PLACEMENT_3D('',#966,#967,#968);-#966 = CARTESIAN_POINT('',(-0.95,0.9,0.575));-#967 = DIRECTION('',(0.,1.,-0.));-#968 = DIRECTION('',(0.,0.,1.));-#969 = PCURVE('',#171,#970);-#970 = DEFINITIONAL_REPRESENTATION('',(#971),#975);-#971 = LINE('',#972,#973);-#972 = CARTESIAN_POINT('',(9.424777960769,5.E-02));-#973 = VECTOR('',#974,1.);-#974 = DIRECTION('',(-1.,0.));-#975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#976 = PCURVE('',#897,#977);-#977 = DEFINITIONAL_REPRESENTATION('',(#978),#982);-#978 = LINE('',#979,#980);-#979 = CARTESIAN_POINT('',(-1.570796326795,0.));-#980 = VECTOR('',#981,1.);-#981 = DIRECTION('',(1.,0.));-#982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#983 = ORIENTED_EDGE('',*,*,#157,.F.);-#984 = ADVANCED_FACE('',(#985),#209,.T.);-#985 = FACE_BOUND('',#986,.T.);-#986 = EDGE_LOOP('',(#987,#988,#1010,#1011));-#987 = ORIENTED_EDGE('',*,*,#811,.F.);-#988 = ORIENTED_EDGE('',*,*,#989,.T.);-#989 = EDGE_CURVE('',#789,#189,#990,.T.);-#990 = SURFACE_CURVE('',#991,(#996,#1003),.PCURVE_S1.);-#991 = CIRCLE('',#992,5.E-02);-#992 = AXIS2_PLACEMENT_3D('',#993,#994,#995);-#993 = CARTESIAN_POINT('',(-0.525,5.E-02,0.575));-#994 = DIRECTION('',(-1.,0.,1.734723475977E-16));-#995 = DIRECTION('',(1.734723475977E-16,0.,1.));-#996 = PCURVE('',#209,#997);-#997 = DEFINITIONAL_REPRESENTATION('',(#998),#1002);-#998 = LINE('',#999,#1000);-#999 = CARTESIAN_POINT('',(9.424777960769,0.475));-#1000 = VECTOR('',#1001,1.);-#1001 = DIRECTION('',(-1.,0.));-#1002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1003 = PCURVE('',#446,#1004);+#365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#366 = ORIENTED_EDGE('',*,*,#367,.T.);+#367 = EDGE_CURVE('',#340,#368,#370,.T.);+#368 = VERTEX_POINT('',#369);+#369 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#370 = SURFACE_CURVE('',#371,(#375,#382),.PCURVE_S1.);+#371 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#372,#373,#374),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#372 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#373 = CARTESIAN_POINT('',(-0.5,1.217104825,0.6));+#374 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#375 = PCURVE('',#310,#376);+#376 = DEFINITIONAL_REPRESENTATION('',(#377),#381);+#377 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#378,#379,#380),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#378 = CARTESIAN_POINT('',(1.2,-2.5E-02));+#379 = CARTESIAN_POINT('',(1.225,-2.5E-02));+#380 = CARTESIAN_POINT('',(1.225,-5.E-02));+#381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#382 = PCURVE('',#383,#393);+#383 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#384,#385,#386)+ ,(#387,#388,#389)+ ,(#390,#391,#392+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 0.,1.570796326795),(4.712388980385,6.28318530718),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#384 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#385 = CARTESIAN_POINT('',(-0.5,1.1842101,0.625));+#386 = CARTESIAN_POINT('',(-0.525,1.1842101,0.625));+#387 = CARTESIAN_POINT('',(-0.5,1.217104825,0.6));+#388 = CARTESIAN_POINT('',(-0.5,1.24999955,0.625));+#389 = CARTESIAN_POINT('',(-0.525,1.24999955,0.625));+#390 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#391 = CARTESIAN_POINT('',(-0.5,1.24999955,0.575));+#392 = CARTESIAN_POINT('',(-0.525,1.24999955,0.575));+#393 = DEFINITIONAL_REPRESENTATION('',(#394),#398);+#394 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#395,#396,#397),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(4.712388980385,6.28318530718),.PIECEWISE_BEZIER_KNOTS.);+#395 = CARTESIAN_POINT('',(1.570796326795,4.712388980385));+#396 = CARTESIAN_POINT('',(0.785398163397,4.712388980385));+#397 = CARTESIAN_POINT('',(0.,4.712388980385));+#398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#399 = ORIENTED_EDGE('',*,*,#400,.T.);+#400 = EDGE_CURVE('',#368,#401,#403,.T.);+#401 = VERTEX_POINT('',#402);+#402 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#403 = SURFACE_CURVE('',#404,(#407,#413),.PCURVE_S1.);+#404 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#405,#406),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#405 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#406 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#407 = PCURVE('',#310,#408);+#408 = DEFINITIONAL_REPRESENTATION('',(#409),#412);+#409 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#410,#411),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#410 = CARTESIAN_POINT('',(1.225,-5.E-02));+#411 = CARTESIAN_POINT('',(1.225,-0.9));+#412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#413 = PCURVE('',#235,#414);+#414 = DEFINITIONAL_REPRESENTATION('',(#415),#419);+#415 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#416,#417,#418),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#416 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#417 = CARTESIAN_POINT('',(1.570796326795,0.475));+#418 = CARTESIAN_POINT('',(1.570796326795,0.9));+#419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#420 = ORIENTED_EDGE('',*,*,#421,.T.);+#421 = EDGE_CURVE('',#401,#422,#424,.T.);+#422 = VERTEX_POINT('',#423);+#423 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#424 = SURFACE_CURVE('',#425,(#429,#436),.PCURVE_S1.);+#425 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#426,#427,#428),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#426 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#427 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.6));+#428 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#429 = PCURVE('',#310,#430);+#430 = DEFINITIONAL_REPRESENTATION('',(#431),#435);+#431 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#432,#433,#434),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#432 = CARTESIAN_POINT('',(1.225,-0.9));+#433 = CARTESIAN_POINT('',(1.225,-0.925));+#434 = CARTESIAN_POINT('',(1.2,-0.925));+#435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#436 = PCURVE('',#437,#447);+#437 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#438,#439,#440)+ ,(#441,#442,#443)+ ,(#444,#445,#446+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 4.712388980385,6.28318530718),(4.712388980385,6.28318530718),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#438 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#439 = CARTESIAN_POINT('',(-0.5,2.739036081278E-17,0.575));+#440 = CARTESIAN_POINT('',(-0.525,2.739036081278E-17,0.575));+#441 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.6));+#442 = CARTESIAN_POINT('',(-0.5,2.739036081278E-17,0.625));+#443 = CARTESIAN_POINT('',(-0.525,2.739036081278E-17,0.625));+#444 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#445 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.625));+#446 = CARTESIAN_POINT('',(-0.525,6.578945E-02,0.625));+#447 = DEFINITIONAL_REPRESENTATION('',(#448),#452);+#448 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#449,#450,#451),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(0.,1.570796326795),.PIECEWISE_BEZIER_KNOTS.);+#449 = CARTESIAN_POINT('',(6.28318530718,4.712388980385));+#450 = CARTESIAN_POINT('',(5.497787143782,4.712388980385));+#451 = CARTESIAN_POINT('',(4.712388980385,4.712388980385));+#452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#453 = ORIENTED_EDGE('',*,*,#454,.T.);+#454 = EDGE_CURVE('',#422,#455,#457,.T.);+#455 = VERTEX_POINT('',#456);+#456 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#457 = SURFACE_CURVE('',#458,(#461,#467),.PCURVE_S1.);+#458 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#459,#460),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#459 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#460 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#461 = PCURVE('',#310,#462);+#462 = DEFINITIONAL_REPRESENTATION('',(#463),#466);+#463 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#464,#465),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#464 = CARTESIAN_POINT('',(1.2,-0.925));+#465 = CARTESIAN_POINT('',(5.E-02,-0.925));+#466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#467 = PCURVE('',#468,#475);+#468 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#469,#470)+ ,(#471,#472)+,(#473,#474+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(3.14159265359,4.712388980385),(-1.2,-5.E-02),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#469 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#470 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#471 = CARTESIAN_POINT('',(-0.5,-1.095614432511E-16,0.575));+#472 = CARTESIAN_POINT('',(-0.5,-1.095614432511E-16,-0.575));+#473 = CARTESIAN_POINT('',(-0.525,0.,0.575));+#474 = CARTESIAN_POINT('',(-0.525,0.,-0.575));+#475 = DEFINITIONAL_REPRESENTATION('',(#476),#480);+#476 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#477,#478,#479),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#477 = CARTESIAN_POINT('',(3.14159265359,-1.2));+#478 = CARTESIAN_POINT('',(3.14159265359,-0.625));+#479 = CARTESIAN_POINT('',(3.14159265359,-5.E-02));+#480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#481 = ORIENTED_EDGE('',*,*,#482,.T.);+#482 = EDGE_CURVE('',#455,#483,#485,.T.);+#483 = VERTEX_POINT('',#484);+#484 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#485 = SURFACE_CURVE('',#486,(#490,#497),.PCURVE_S1.);+#486 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#487,#488,#489),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#487 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#488 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.6));+#489 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#490 = PCURVE('',#310,#491);+#491 = DEFINITIONAL_REPRESENTATION('',(#492),#496);+#492 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#493,#494,#495),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#493 = CARTESIAN_POINT('',(5.E-02,-0.925));+#494 = CARTESIAN_POINT('',(2.5E-02,-0.925));+#495 = CARTESIAN_POINT('',(2.5E-02,-0.9));+#496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#497 = PCURVE('',#498,#508);+#498 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#499,#500,#501)+ ,(#502,#503,#504)+ ,(#505,#506,#507+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 3.14159265359,4.712388980385),(4.712388980385,6.28318530718),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#499 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#500 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.625));+#501 = CARTESIAN_POINT('',(-0.525,6.578945E-02,-0.625));+#502 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.6));+#503 = CARTESIAN_POINT('',(-0.5,4.565060135464E-17,-0.625));+#504 = CARTESIAN_POINT('',(-0.525,3.652048108371E-17,-0.625));+#505 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#506 = CARTESIAN_POINT('',(-0.5,3.652048108371E-17,-0.575));+#507 = CARTESIAN_POINT('',(-0.525,2.739036081278E-17,-0.575));+#508 = DEFINITIONAL_REPRESENTATION('',(#509),#513);+#509 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#510,#511,#512),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(1.570796326795,3.14159265359),.PIECEWISE_BEZIER_KNOTS.);+#510 = CARTESIAN_POINT('',(4.712388980385,4.712388980385));+#511 = CARTESIAN_POINT('',(3.926990816987,4.712388980385));+#512 = CARTESIAN_POINT('',(3.14159265359,4.712388980385));+#513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#514 = ORIENTED_EDGE('',*,*,#515,.T.);+#515 = EDGE_CURVE('',#483,#300,#516,.T.);+#516 = SURFACE_CURVE('',#517,(#520,#526),.PCURVE_S1.);+#517 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#518,#519),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#518 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#519 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6));+#520 = PCURVE('',#310,#521);+#521 = DEFINITIONAL_REPRESENTATION('',(#522),#525);+#522 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#523,#524),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#523 = CARTESIAN_POINT('',(2.5E-02,-0.9));+#524 = CARTESIAN_POINT('',(2.5E-02,-5.E-02));+#525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#526 = PCURVE('',#527,#534);+#527 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#528,#529)+ ,(#530,#531)+,(#532,#533+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(0.,1.570796326795),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#528 = CARTESIAN_POINT('',(-0.525,1.1842101,-0.625));+#529 = CARTESIAN_POINT('',(-0.525,6.578945E-02,-0.625));+#530 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.625));+#531 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.625));+#532 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6));+#533 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#534 = DEFINITIONAL_REPRESENTATION('',(#535),#539);+#535 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#536,#537,#538),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#536 = CARTESIAN_POINT('',(1.570796326795,0.9));+#537 = CARTESIAN_POINT('',(1.570796326795,0.475));+#538 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#540 = ADVANCED_FACE('',(#541),#554,.F.);+#541 = FACE_BOUND('',#542,.T.);+#542 = EDGE_LOOP('',(#543,#578,#599,#627));+#543 = ORIENTED_EDGE('',*,*,#544,.T.);+#544 = EDGE_CURVE('',#545,#547,#549,.T.);+#545 = VERTEX_POINT('',#546);+#546 = CARTESIAN_POINT('',(-0.95,1.1842101,-0.625));+#547 = VERTEX_POINT('',#548);+#548 = CARTESIAN_POINT('',(-0.525,1.1842101,-0.625));+#549 = SURFACE_CURVE('',#550,(#553,#564),.PCURVE_S1.);+#550 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#551,#552),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.45,-2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#551 = CARTESIAN_POINT('',(-0.95,1.1842101,-0.625));+#552 = CARTESIAN_POINT('',(-0.525,1.1842101,-0.625));+#553 = PCURVE('',#554,#559);+#554 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#555,#556)+ ,(#557,#558+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(5.E-02,0.475),(-0.9,+ -5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#555 = CARTESIAN_POINT('',(-0.95,6.578945E-02,-0.625));+#556 = CARTESIAN_POINT('',(-0.95,1.1842101,-0.625));+#557 = CARTESIAN_POINT('',(-0.525,6.578945E-02,-0.625));+#558 = CARTESIAN_POINT('',(-0.525,1.1842101,-0.625));+#559 = DEFINITIONAL_REPRESENTATION('',(#560),#563);+#560 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#561,#562),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.45,-2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#561 = CARTESIAN_POINT('',(5.E-02,-5.E-02));+#562 = CARTESIAN_POINT('',(0.475,-5.E-02));+#563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#564 = PCURVE('',#565,#572);+#565 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#566,#567)+ ,(#568,#569)+,(#570,#571+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(0.,1.570796326795),(-0.95,-0.525),.PIECEWISE_BEZIER_KNOTS.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#566 = CARTESIAN_POINT('',(-0.95,1.1842101,-0.625));+#567 = CARTESIAN_POINT('',(-0.525,1.1842101,-0.625));+#568 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.625));+#569 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.625));+#570 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.575));+#571 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.575));+#572 = DEFINITIONAL_REPRESENTATION('',(#573),#577);+#573 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#574,#575,#576),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.45,-2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#574 = CARTESIAN_POINT('',(0.,-0.95));+#575 = CARTESIAN_POINT('',(0.,-0.7375));+#576 = CARTESIAN_POINT('',(0.,-0.525));+#577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#578 = ORIENTED_EDGE('',*,*,#579,.T.);+#579 = EDGE_CURVE('',#547,#580,#582,.T.);+#580 = VERTEX_POINT('',#581);+#581 = CARTESIAN_POINT('',(-0.525,6.578945E-02,-0.625));+#582 = SURFACE_CURVE('',#583,(#586,#592),.PCURVE_S1.);+#583 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#584,#585),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#584 = CARTESIAN_POINT('',(-0.525,1.1842101,-0.625));+#585 = CARTESIAN_POINT('',(-0.525,6.578945E-02,-0.625));+#586 = PCURVE('',#554,#587);+#587 = DEFINITIONAL_REPRESENTATION('',(#588),#591);+#588 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#589,#590),.UNSPECIFIED.,.F.,.F.,+ (2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#589 = CARTESIAN_POINT('',(0.475,-5.E-02));+#590 = CARTESIAN_POINT('',(0.475,-0.9));+#591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#592 = PCURVE('',#527,#593);+#593 = DEFINITIONAL_REPRESENTATION('',(#594),#598);+#594 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#595,#596,#597),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#595 = CARTESIAN_POINT('',(0.,5.E-02));+#596 = CARTESIAN_POINT('',(0.,0.475));+#597 = CARTESIAN_POINT('',(0.,0.9));+#598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#599 = ORIENTED_EDGE('',*,*,#600,.T.);+#600 = EDGE_CURVE('',#580,#601,#603,.T.);+#601 = VERTEX_POINT('',#602);+#602 = CARTESIAN_POINT('',(-0.95,6.578945E-02,-0.625));+#603 = SURFACE_CURVE('',#604,(#607,#613),.PCURVE_S1.);+#604 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#605,#606),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#605 = CARTESIAN_POINT('',(-0.525,6.578945E-02,-0.625));+#606 = CARTESIAN_POINT('',(-0.95,6.578945E-02,-0.625));+#607 = PCURVE('',#554,#608);+#608 = DEFINITIONAL_REPRESENTATION('',(#609),#612);+#609 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#610,#611),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#610 = CARTESIAN_POINT('',(0.475,-0.9));+#611 = CARTESIAN_POINT('',(5.E-02,-0.9));+#612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#613 = PCURVE('',#614,#621);+#614 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#615,#616)+ ,(#617,#618)+,(#619,#620+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(3.14159265359,4.712388980385),(-0.475,-5.E-02),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#615 = CARTESIAN_POINT('',(-0.525,6.578945E-02,-0.625));+#616 = CARTESIAN_POINT('',(-0.95,6.578945E-02,-0.625));+#617 = CARTESIAN_POINT('',(-0.525,9.130120270928E-18,-0.625));+#618 = CARTESIAN_POINT('',(-0.95,9.130120270928E-18,-0.625));+#619 = CARTESIAN_POINT('',(-0.525,0.,-0.575));+#620 = CARTESIAN_POINT('',(-0.95,0.,-0.575));+#621 = DEFINITIONAL_REPRESENTATION('',(#622),#626);+#622 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#623,#624,#625),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#623 = CARTESIAN_POINT('',(3.14159265359,-0.475));+#624 = CARTESIAN_POINT('',(3.14159265359,-0.2625));+#625 = CARTESIAN_POINT('',(3.14159265359,-5.E-02));+#626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#627 = ORIENTED_EDGE('',*,*,#628,.T.);+#628 = EDGE_CURVE('',#601,#545,#629,.T.);+#629 = SURFACE_CURVE('',#630,(#633,#639),.PCURVE_S1.);+#630 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#631,#632),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#631 = CARTESIAN_POINT('',(-0.95,6.578945E-02,-0.625));+#632 = CARTESIAN_POINT('',(-0.95,1.1842101,-0.625));+#633 = PCURVE('',#554,#634);+#634 = DEFINITIONAL_REPRESENTATION('',(#635),#638);+#635 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#636,#637),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#636 = CARTESIAN_POINT('',(5.E-02,-0.9));+#637 = CARTESIAN_POINT('',(5.E-02,-5.E-02));+#638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#639 = PCURVE('',#115,#640);+#640 = DEFINITIONAL_REPRESENTATION('',(#641),#645);+#641 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#642,#643,#644),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#642 = CARTESIAN_POINT('',(6.28318530718,0.9));+#643 = CARTESIAN_POINT('',(6.28318530718,0.475));+#644 = CARTESIAN_POINT('',(6.28318530718,5.E-02));+#645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#646 = ADVANCED_FACE('',(#647),#660,.T.);+#647 = FACE_BOUND('',#648,.T.);+#648 = EDGE_LOOP('',(#649,#677,#698,#719));+#649 = ORIENTED_EDGE('',*,*,#650,.T.);+#650 = EDGE_CURVE('',#651,#653,#655,.T.);+#651 = VERTEX_POINT('',#652);+#652 = CARTESIAN_POINT('',(-0.95,1.24999955,0.575));+#653 = VERTEX_POINT('',#654);+#654 = CARTESIAN_POINT('',(-0.525,1.24999955,0.575));+#655 = SURFACE_CURVE('',#656,(#659,#670),.PCURVE_S1.);+#656 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#657,#658),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.45,-2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#657 = CARTESIAN_POINT('',(-0.95,1.24999955,0.575));+#658 = CARTESIAN_POINT('',(-0.525,1.24999955,0.575));+#659 = PCURVE('',#660,#665);+#660 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#661,#662)+ ,(#663,#664+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-0.575,0.575),(-0.95,+ -0.525),.PIECEWISE_BEZIER_KNOTS.);+#661 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.575));+#662 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.575));+#663 = CARTESIAN_POINT('',(-0.95,1.24999955,0.575));+#664 = CARTESIAN_POINT('',(-0.525,1.24999955,0.575));+#665 = DEFINITIONAL_REPRESENTATION('',(#666),#669);+#666 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#667,#668),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.45,-2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#667 = CARTESIAN_POINT('',(0.575,-0.95));+#668 = CARTESIAN_POINT('',(0.575,-0.525));+#669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#670 = PCURVE('',#263,#671);+#671 = DEFINITIONAL_REPRESENTATION('',(#672),#676);+#672 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#673,#674,#675),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.45,-2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#673 = CARTESIAN_POINT('',(1.570796326795,0.95));+#674 = CARTESIAN_POINT('',(1.570796326795,0.7375));+#675 = CARTESIAN_POINT('',(1.570796326795,0.525));+#676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#677 = ORIENTED_EDGE('',*,*,#678,.T.);+#678 = EDGE_CURVE('',#653,#679,#681,.T.);+#679 = VERTEX_POINT('',#680);+#680 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.575));+#681 = SURFACE_CURVE('',#682,(#685,#691),.PCURVE_S1.);+#682 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#683,#684),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#683 = CARTESIAN_POINT('',(-0.525,1.24999955,0.575));+#684 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.575));+#685 = PCURVE('',#660,#686);+#686 = DEFINITIONAL_REPRESENTATION('',(#687),#690);+#687 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#688,#689),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#688 = CARTESIAN_POINT('',(0.575,-0.525));+#689 = CARTESIAN_POINT('',(-0.575,-0.525));+#690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#691 = PCURVE('',#353,#692);+#692 = DEFINITIONAL_REPRESENTATION('',(#693),#697);+#693 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#694,#695,#696),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#694 = CARTESIAN_POINT('',(1.570796326795,0.575));+#695 = CARTESIAN_POINT('',(1.570796326795,1.255123456148E-16));+#696 = CARTESIAN_POINT('',(1.570796326795,-0.575));+#697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#698 = ORIENTED_EDGE('',*,*,#699,.T.);+#699 = EDGE_CURVE('',#679,#700,#702,.T.);+#700 = VERTEX_POINT('',#701);+#701 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.575));+#702 = SURFACE_CURVE('',#703,(#706,#712),.PCURVE_S1.);+#703 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#704,#705),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#704 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.575));+#705 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.575));+#706 = PCURVE('',#660,#707);+#707 = DEFINITIONAL_REPRESENTATION('',(#708),#711);+#708 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#709,#710),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#709 = CARTESIAN_POINT('',(-0.575,-0.525));+#710 = CARTESIAN_POINT('',(-0.575,-0.95));+#711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#712 = PCURVE('',#565,#713);+#713 = DEFINITIONAL_REPRESENTATION('',(#714),#718);+#714 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#715,#716,#717),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#715 = CARTESIAN_POINT('',(1.570796326795,-0.525));+#716 = CARTESIAN_POINT('',(1.570796326795,-0.7375));+#717 = CARTESIAN_POINT('',(1.570796326795,-0.95));+#718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#719 = ORIENTED_EDGE('',*,*,#720,.T.);+#720 = EDGE_CURVE('',#700,#651,#721,.T.);+#721 = SURFACE_CURVE('',#722,(#725,#731),.PCURVE_S1.);+#722 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#723,#724),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#723 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.575));+#724 = CARTESIAN_POINT('',(-0.95,1.24999955,0.575));+#725 = PCURVE('',#660,#726);+#726 = DEFINITIONAL_REPRESENTATION('',(#727),#730);+#727 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#728,#729),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#728 = CARTESIAN_POINT('',(-0.575,-0.95));+#729 = CARTESIAN_POINT('',(0.575,-0.95));+#730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#731 = PCURVE('',#87,#732);+#732 = DEFINITIONAL_REPRESENTATION('',(#733),#737);+#733 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#734,#735,#736),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#734 = CARTESIAN_POINT('',(1.570796326795,0.575));+#735 = CARTESIAN_POINT('',(1.570796326795,-3.367404394543E-17));+#736 = CARTESIAN_POINT('',(1.570796326795,-0.575));+#737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#738 = ADVANCED_FACE('',(#739),#752,.F.);+#739 = FACE_BOUND('',#740,.T.);+#740 = EDGE_LOOP('',(#741,#769,#790,#811));+#741 = ORIENTED_EDGE('',*,*,#742,.T.);+#742 = EDGE_CURVE('',#743,#745,#747,.T.);+#743 = VERTEX_POINT('',#744);+#744 = CARTESIAN_POINT('',(-0.95,0.,-0.575));+#745 = VERTEX_POINT('',#746);+#746 = CARTESIAN_POINT('',(-0.525,0.,-0.575));+#747 = SURFACE_CURVE('',#748,(#751,#762),.PCURVE_S1.);+#748 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#749,#750),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.95,-0.525),.PIECEWISE_BEZIER_KNOTS.);+#749 = CARTESIAN_POINT('',(-0.95,0.,-0.575));+#750 = CARTESIAN_POINT('',(-0.525,0.,-0.575));+#751 = PCURVE('',#752,#757);+#752 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#753,#754)+ ,(#755,#756+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-0.575,0.575),(-0.95,+ -0.525),.PIECEWISE_BEZIER_KNOTS.);+#753 = CARTESIAN_POINT('',(-0.95,0.,-0.575));+#754 = CARTESIAN_POINT('',(-0.525,0.,-0.575));+#755 = CARTESIAN_POINT('',(-0.95,0.,0.575));+#756 = CARTESIAN_POINT('',(-0.525,0.,0.575));+#757 = DEFINITIONAL_REPRESENTATION('',(#758),#761);+#758 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#759,#760),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.95,-0.525),.PIECEWISE_BEZIER_KNOTS.);+#759 = CARTESIAN_POINT('',(-0.575,-0.95));+#760 = CARTESIAN_POINT('',(-0.575,-0.525));+#761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#762 = PCURVE('',#614,#763);+#763 = DEFINITIONAL_REPRESENTATION('',(#764),#768);+#764 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#765,#766,#767),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.95,-0.525),.PIECEWISE_BEZIER_KNOTS.);+#765 = CARTESIAN_POINT('',(4.712388980385,-5.E-02));+#766 = CARTESIAN_POINT('',(4.712388980385,-0.2625));+#767 = CARTESIAN_POINT('',(4.712388980385,-0.475));+#768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#769 = ORIENTED_EDGE('',*,*,#770,.T.);+#770 = EDGE_CURVE('',#745,#771,#773,.T.);+#771 = VERTEX_POINT('',#772);+#772 = CARTESIAN_POINT('',(-0.525,0.,0.575));+#773 = SURFACE_CURVE('',#774,(#777,#783),.PCURVE_S1.);+#774 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#775,#776),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#775 = CARTESIAN_POINT('',(-0.525,0.,-0.575));+#776 = CARTESIAN_POINT('',(-0.525,0.,0.575));+#777 = PCURVE('',#752,#778);+#778 = DEFINITIONAL_REPRESENTATION('',(#779),#782);+#779 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#780,#781),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#780 = CARTESIAN_POINT('',(-0.575,-0.525));+#781 = CARTESIAN_POINT('',(0.575,-0.525));+#782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#783 = PCURVE('',#468,#784);+#784 = DEFINITIONAL_REPRESENTATION('',(#785),#789);+#785 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#786,#787,#788),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#786 = CARTESIAN_POINT('',(4.712388980385,-5.E-02));+#787 = CARTESIAN_POINT('',(4.712388980385,-0.625));+#788 = CARTESIAN_POINT('',(4.712388980385,-1.2));+#789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#790 = ORIENTED_EDGE('',*,*,#791,.T.);+#791 = EDGE_CURVE('',#771,#792,#794,.T.);+#792 = VERTEX_POINT('',#793);+#793 = CARTESIAN_POINT('',(-0.95,0.,0.575));+#794 = SURFACE_CURVE('',#795,(#798,#804),.PCURVE_S1.);+#795 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#796,#797),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.525,0.95),.PIECEWISE_BEZIER_KNOTS.);+#796 = CARTESIAN_POINT('',(-0.525,0.,0.575));+#797 = CARTESIAN_POINT('',(-0.95,0.,0.575));+#798 = PCURVE('',#752,#799);+#799 = DEFINITIONAL_REPRESENTATION('',(#800),#803);+#800 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#801,#802),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.525,0.95),.PIECEWISE_BEZIER_KNOTS.);+#801 = CARTESIAN_POINT('',(0.575,-0.525));+#802 = CARTESIAN_POINT('',(0.575,-0.95));+#803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#804 = PCURVE('',#207,#805);+#805 = DEFINITIONAL_REPRESENTATION('',(#806),#810);+#806 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#807,#808,#809),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(0.525,0.95),.PIECEWISE_BEZIER_KNOTS.);+#807 = CARTESIAN_POINT('',(4.712388980385,0.475));+#808 = CARTESIAN_POINT('',(4.712388980385,0.2625));+#809 = CARTESIAN_POINT('',(4.712388980385,5.E-02));+#810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#811 = ORIENTED_EDGE('',*,*,#812,.T.);+#812 = EDGE_CURVE('',#792,#743,#813,.T.);+#813 = SURFACE_CURVE('',#814,(#817,#823),.PCURVE_S1.);+#814 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#815,#816),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#815 = CARTESIAN_POINT('',(-0.95,0.,0.575));+#816 = CARTESIAN_POINT('',(-0.95,0.,-0.575));+#817 = PCURVE('',#752,#818);+#818 = DEFINITIONAL_REPRESENTATION('',(#819),#822);+#819 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#820,#821),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#820 = CARTESIAN_POINT('',(0.575,-0.95));+#821 = CARTESIAN_POINT('',(-0.575,-0.95));+#822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#823 = PCURVE('',#143,#824);+#824 = DEFINITIONAL_REPRESENTATION('',(#825),#829);+#825 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#826,#827,#828),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#826 = CARTESIAN_POINT('',(4.712388980385,1.2));+#827 = CARTESIAN_POINT('',(4.712388980385,0.625));+#828 = CARTESIAN_POINT('',(4.712388980385,5.E-02));+#829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#830 = ADVANCED_FACE('',(#831),#263,.T.);+#831 = FACE_BOUND('',#832,.T.);+#832 = EDGE_LOOP('',(#833,#834,#855,#856));+#833 = ORIENTED_EDGE('',*,*,#249,.F.);+#834 = ORIENTED_EDGE('',*,*,#835,.T.);+#835 = EDGE_CURVE('',#222,#653,#836,.T.);+#836 = SURFACE_CURVE('',#837,(#841,#848),.PCURVE_S1.);+#837 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#838,#839,#840),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#838 = CARTESIAN_POINT('',(-0.525,1.1842101,0.625));+#839 = CARTESIAN_POINT('',(-0.525,1.24999955,0.625));+#840 = CARTESIAN_POINT('',(-0.525,1.24999955,0.575));+#841 = PCURVE('',#263,#842);+#842 = DEFINITIONAL_REPRESENTATION('',(#843),#847);+#843 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#844,#845,#846),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(0.,1.570796326795),.PIECEWISE_BEZIER_KNOTS.);+#844 = CARTESIAN_POINT('',(0.,0.525));+#845 = CARTESIAN_POINT('',(0.785398163397,0.525));+#846 = CARTESIAN_POINT('',(1.570796326795,0.525));+#847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#848 = PCURVE('',#383,#849);+#849 = DEFINITIONAL_REPRESENTATION('',(#850),#854);+#850 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#851,#852,#853),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(0.,1.570796326795),.PIECEWISE_BEZIER_KNOTS.);+#851 = CARTESIAN_POINT('',(0.,6.28318530718));+#852 = CARTESIAN_POINT('',(0.785398163397,6.28318530718));+#853 = CARTESIAN_POINT('',(1.570796326795,6.28318530718));+#854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#855 = ORIENTED_EDGE('',*,*,#650,.F.);+#856 = ORIENTED_EDGE('',*,*,#857,.F.);+#857 = EDGE_CURVE('',#250,#651,#858,.T.);+#858 = SURFACE_CURVE('',#859,(#863,#870),.PCURVE_S1.);+#859 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#860,#861,#862),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#860 = CARTESIAN_POINT('',(-0.95,1.1842101,0.625));+#861 = CARTESIAN_POINT('',(-0.95,1.24999955,0.625));+#862 = CARTESIAN_POINT('',(-0.95,1.24999955,0.575));+#863 = PCURVE('',#263,#864);+#864 = DEFINITIONAL_REPRESENTATION('',(#865),#869);+#865 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#866,#867,#868),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(0.,1.570796326795),.PIECEWISE_BEZIER_KNOTS.);+#866 = CARTESIAN_POINT('',(0.,0.95));+#867 = CARTESIAN_POINT('',(0.785398163397,0.95));+#868 = CARTESIAN_POINT('',(1.570796326795,0.95));+#869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#870 = PCURVE('',#871,#881);+#871 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#872,#873,#874)+ ,(#875,#876,#877)+ ,(#878,#879,#880+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 3.14159265359,4.712388980385),(0.,1.570796326795),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#872 = CARTESIAN_POINT('',(-1.,1.1842101,0.575));+#873 = CARTESIAN_POINT('',(-1.,1.24999955,0.575));+#874 = CARTESIAN_POINT('',(-0.95,1.24999955,0.575));+#875 = CARTESIAN_POINT('',(-1.,1.1842101,0.625));+#876 = CARTESIAN_POINT('',(-1.,1.24999955,0.625));+#877 = CARTESIAN_POINT('',(-0.95,1.24999955,0.575));+#878 = CARTESIAN_POINT('',(-0.95,1.1842101,0.625));+#879 = CARTESIAN_POINT('',(-0.95,1.24999955,0.625));+#880 = CARTESIAN_POINT('',(-0.95,1.24999955,0.575));+#881 = DEFINITIONAL_REPRESENTATION('',(#882),#886);+#882 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#883,#884,#885),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(0.,1.570796326795),.PIECEWISE_BEZIER_KNOTS.);+#883 = CARTESIAN_POINT('',(4.712388980385,0.));+#884 = CARTESIAN_POINT('',(4.712388980385,0.785398163397));+#885 = CARTESIAN_POINT('',(4.712388980385,1.570796326795));+#886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#887 = ADVANCED_FACE('',(#888),#169,.T.);+#888 = FACE_BOUND('',#889,.T.);+#889 = EDGE_LOOP('',(#890,#921,#922,#943));+#890 = ORIENTED_EDGE('',*,*,#891,.F.);+#891 = EDGE_CURVE('',#187,#130,#892,.T.);+#892 = SURFACE_CURVE('',#893,(#897,#904),.PCURVE_S1.);+#893 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#894,#895,#896),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#894 = CARTESIAN_POINT('',(-0.95,6.578945E-02,0.625));+#895 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.625));+#896 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.575));+#897 = PCURVE('',#169,#898);+#898 = DEFINITIONAL_REPRESENTATION('',(#899),#903);+#899 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#900,#901,#902),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(3.14159265359,4.712388980385),.PIECEWISE_BEZIER_KNOTS.);+#900 = CARTESIAN_POINT('',(3.14159265359,0.9));+#901 = CARTESIAN_POINT('',(3.926990816987,0.9));+#902 = CARTESIAN_POINT('',(4.712388980385,0.9));+#903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#904 = PCURVE('',#905,#915);+#905 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#906,#907,#908)+ ,(#909,#910,#911)+ ,(#912,#913,#914+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 3.14159265359,4.712388980385),(-1.570796326795,4.440892098501E-16),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#906 = CARTESIAN_POINT('',(-0.95,0.,0.575));+#907 = CARTESIAN_POINT('',(-1.,0.,0.575));+#908 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.575));+#909 = CARTESIAN_POINT('',(-0.95,0.,0.575));+#910 = CARTESIAN_POINT('',(-1.,0.,0.625));+#911 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.625));+#912 = CARTESIAN_POINT('',(-0.95,0.,0.575));+#913 = CARTESIAN_POINT('',(-0.95,0.,0.625));+#914 = CARTESIAN_POINT('',(-0.95,6.578945E-02,0.625));+#915 = DEFINITIONAL_REPRESENTATION('',(#916),#920);+#916 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#917,#918,#919),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(3.14159265359,4.712388980385),.PIECEWISE_BEZIER_KNOTS.);+#917 = CARTESIAN_POINT('',(4.712388980385,4.163336342344E-16));+#918 = CARTESIAN_POINT('',(3.926990816987,4.163336342344E-16));+#919 = CARTESIAN_POINT('',(3.14159265359,4.163336342344E-16));+#920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#921 = ORIENTED_EDGE('',*,*,#277,.F.);+#922 = ORIENTED_EDGE('',*,*,#923,.F.);+#923 = EDGE_CURVE('',#67,#250,#924,.T.);+#924 = SURFACE_CURVE('',#925,(#929,#936),.PCURVE_S1.);+#925 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#926,#927,#928),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#926 = CARTESIAN_POINT('',(-1.,1.1842101,0.575));+#927 = CARTESIAN_POINT('',(-1.,1.1842101,0.625));+#928 = CARTESIAN_POINT('',(-0.95,1.1842101,0.625));+#929 = PCURVE('',#169,#930);+#930 = DEFINITIONAL_REPRESENTATION('',(#931),#935);+#931 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#932,#933,#934),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(4.712388980385,6.28318530718),.PIECEWISE_BEZIER_KNOTS.);+#932 = CARTESIAN_POINT('',(4.712388980385,5.E-02));+#933 = CARTESIAN_POINT('',(3.926990816987,5.E-02));+#934 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#936 = PCURVE('',#871,#937);+#937 = DEFINITIONAL_REPRESENTATION('',(#938),#942);+#938 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#939,#940,#941),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(4.712388980385,6.28318530718),.PIECEWISE_BEZIER_KNOTS.);+#939 = CARTESIAN_POINT('',(3.14159265359,0.));+#940 = CARTESIAN_POINT('',(3.926990816987,0.));+#941 = CARTESIAN_POINT('',(4.712388980385,0.));+#942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#943 = ORIENTED_EDGE('',*,*,#157,.F.);+#944 = ADVANCED_FACE('',(#945),#207,.T.);+#945 = FACE_BOUND('',#946,.T.);+#946 = EDGE_LOOP('',(#947,#948,#969,#970));+#947 = ORIENTED_EDGE('',*,*,#791,.F.);+#948 = ORIENTED_EDGE('',*,*,#949,.T.);+#949 = EDGE_CURVE('',#771,#189,#950,.T.);+#950 = SURFACE_CURVE('',#951,(#955,#962),.PCURVE_S1.);+#951 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#952,#953,#954),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#952 = CARTESIAN_POINT('',(-0.525,0.,0.575));+#953 = CARTESIAN_POINT('',(-0.525,-1.826024054186E-17,0.625));+#954 = CARTESIAN_POINT('',(-0.525,6.578945E-02,0.625));+#955 = PCURVE('',#207,#956);+#956 = DEFINITIONAL_REPRESENTATION('',(#957),#961);+#957 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#958,#959,#960),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(4.712388980385,6.28318530718),.PIECEWISE_BEZIER_KNOTS.);+#958 = CARTESIAN_POINT('',(4.712388980385,0.475));+#959 = CARTESIAN_POINT('',(3.926990816987,0.475));+#960 = CARTESIAN_POINT('',(3.14159265359,0.475));+#961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#962 = PCURVE('',#437,#963);+#963 = DEFINITIONAL_REPRESENTATION('',(#964),#968);+#964 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#965,#966,#967),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(4.712388980385,6.28318530718),.PIECEWISE_BEZIER_KNOTS.);+#965 = CARTESIAN_POINT('',(4.712388980385,6.28318530718));+#966 = CARTESIAN_POINT('',(5.497787143782,6.28318530718));+#967 = CARTESIAN_POINT('',(6.28318530718,6.28318530718));+#968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#969 = ORIENTED_EDGE('',*,*,#186,.F.);+#970 = ORIENTED_EDGE('',*,*,#971,.F.);+#971 = EDGE_CURVE('',#792,#187,#972,.T.);+#972 = SURFACE_CURVE('',#973,(#977,#984),.PCURVE_S1.);+#973 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#974,#975,#976),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#974 = CARTESIAN_POINT('',(-0.95,-2.739036081278E-17,0.575));+#975 = CARTESIAN_POINT('',(-0.95,-4.565060135464E-17,0.625));+#976 = CARTESIAN_POINT('',(-0.95,6.578945E-02,0.625));+#977 = PCURVE('',#207,#978);+#978 = DEFINITIONAL_REPRESENTATION('',(#979),#983);+#979 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#980,#981,#982),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(4.712388980385,6.28318530718),.PIECEWISE_BEZIER_KNOTS.);+#980 = CARTESIAN_POINT('',(4.712388980385,5.E-02));+#981 = CARTESIAN_POINT('',(3.926990816987,5.E-02));+#982 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#984 = PCURVE('',#905,#985);+#985 = DEFINITIONAL_REPRESENTATION('',(#986),#990);+#986 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#987,#988,#989),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(4.712388980385,6.28318530718),.PIECEWISE_BEZIER_KNOTS.);+#987 = CARTESIAN_POINT('',(4.712388980385,-1.570796326795));+#988 = CARTESIAN_POINT('',(4.712388980385,-0.785398163397));+#989 = CARTESIAN_POINT('',(4.712388980385,-2.775557561563E-16));+#990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#991 = ADVANCED_FACE('',(#992),#871,.T.);+#992 = FACE_BOUND('',#993,.T.);+#993 = EDGE_LOOP('',(#994,#995,#996));+#994 = ORIENTED_EDGE('',*,*,#923,.T.);+#995 = ORIENTED_EDGE('',*,*,#857,.T.);+#996 = ORIENTED_EDGE('',*,*,#997,.F.);+#997 = EDGE_CURVE('',#67,#651,#998,.T.);+#998 = SURFACE_CURVE('',#999,(#1003,#1010),.PCURVE_S1.);+#999 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1000,#1001,#1002),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1000 = CARTESIAN_POINT('',(-1.,1.1842101,0.575));+#1001 = CARTESIAN_POINT('',(-1.,1.24999955,0.575));+#1002 = CARTESIAN_POINT('',(-0.95,1.24999955,0.575));+#1003 = PCURVE('',#871,#1004); #1004 = DEFINITIONAL_REPRESENTATION('',(#1005),#1009);-#1005 = LINE('',#1006,#1007);-#1006 = CARTESIAN_POINT('',(0.,6.28318530718));-#1007 = VECTOR('',#1008,1.);-#1008 = DIRECTION('',(1.,0.));+#1005 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1006,#1007,#1008),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#1006 = CARTESIAN_POINT('',(3.14159265359,0.));+#1007 = CARTESIAN_POINT('',(3.14159265359,0.785398163397));+#1008 = CARTESIAN_POINT('',(3.14159265359,1.570796326795)); #1009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1010 = ORIENTED_EDGE('',*,*,#186,.F.);-#1011 = ORIENTED_EDGE('',*,*,#1012,.F.);-#1012 = EDGE_CURVE('',#812,#187,#1013,.T.);-#1013 = SURFACE_CURVE('',#1014,(#1019,#1026),.PCURVE_S1.);-#1014 = CIRCLE('',#1015,5.E-02);-#1015 = AXIS2_PLACEMENT_3D('',#1016,#1017,#1018);-#1016 = CARTESIAN_POINT('',(-0.95,5.E-02,0.575));-#1017 = DIRECTION('',(-1.,0.,0.));-#1018 = DIRECTION('',(0.,0.,1.));-#1019 = PCURVE('',#209,#1020);-#1020 = DEFINITIONAL_REPRESENTATION('',(#1021),#1025);-#1021 = LINE('',#1022,#1023);-#1022 = CARTESIAN_POINT('',(9.424777960769,5.E-02));-#1023 = VECTOR('',#1024,1.);-#1024 = DIRECTION('',(-1.,0.));-#1025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1026 = PCURVE('',#949,#1027);-#1027 = DEFINITIONAL_REPRESENTATION('',(#1028),#1054);-#1028 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1029,#1030,#1031,#1032,#1033,- #1034,#1035,#1036,#1037,#1038,#1039,#1040,#1041,#1042,#1043,#1044,- #1045,#1046,#1047,#1048,#1049,#1050,#1051,#1052,#1053),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (4.712388980385,4.783788813421,4.855188646457,4.926588479493,- 4.997988312529,5.069388145565,5.140787978601,5.212187811638,- 5.283587644674,5.35498747771,5.426387310746,5.497787143782,- 5.569186976818,5.640586809854,5.711986642891,5.783386475927,- 5.854786308963,5.926186141999,5.997585975035,6.068985808071,- 6.140385641107,6.211785474143,6.28318530718),.UNSPECIFIED.);-#1029 = CARTESIAN_POINT('',(4.712388980385,-1.570796326795));-#1030 = CARTESIAN_POINT('',(4.712388980385,-1.54699638245));-#1031 = CARTESIAN_POINT('',(4.712388980385,-1.499396493759));-#1032 = CARTESIAN_POINT('',(4.712388980385,-1.427996660723));-#1033 = CARTESIAN_POINT('',(4.712388980385,-1.356596827687));-#1034 = CARTESIAN_POINT('',(4.712388980385,-1.28519699465));-#1035 = CARTESIAN_POINT('',(4.712388980385,-1.213797161614));-#1036 = CARTESIAN_POINT('',(4.712388980385,-1.142397328578));-#1037 = CARTESIAN_POINT('',(4.712388980385,-1.070997495542));-#1038 = CARTESIAN_POINT('',(4.712388980385,-0.999597662506));-#1039 = CARTESIAN_POINT('',(4.712388980385,-0.92819782947));-#1040 = CARTESIAN_POINT('',(4.712388980385,-0.856797996434));-#1041 = CARTESIAN_POINT('',(4.712388980385,-0.785398163397));-#1042 = CARTESIAN_POINT('',(4.712388980385,-0.713998330361));-#1043 = CARTESIAN_POINT('',(4.712388980385,-0.642598497325));-#1044 = CARTESIAN_POINT('',(4.712388980385,-0.571198664289));-#1045 = CARTESIAN_POINT('',(4.712388980385,-0.499798831253));-#1046 = CARTESIAN_POINT('',(4.712388980385,-0.428398998217));-#1047 = CARTESIAN_POINT('',(4.712388980385,-0.356999165181));-#1048 = CARTESIAN_POINT('',(4.712388980385,-0.285599332145));-#1049 = CARTESIAN_POINT('',(4.712388980385,-0.214199499108));-#1050 = CARTESIAN_POINT('',(4.712388980385,-0.142799666072));-#1051 = CARTESIAN_POINT('',(4.712388980385,-7.139983303613E-02));-#1052 = CARTESIAN_POINT('',(4.712388980385,-2.379994434538E-02));-#1053 = CARTESIAN_POINT('',(4.712388980385,-2.775557561563E-16));-#1054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1055 = ADVANCED_FACE('',(#1056),#897,.T.);-#1056 = FACE_BOUND('',#1057,.T.);-#1057 = EDGE_LOOP('',(#1058,#1059,#1060));-#1058 = ORIENTED_EDGE('',*,*,#962,.T.);-#1059 = ORIENTED_EDGE('',*,*,#882,.T.);-#1060 = ORIENTED_EDGE('',*,*,#1061,.F.);-#1061 = EDGE_CURVE('',#67,#659,#1062,.T.);-#1062 = SURFACE_CURVE('',#1063,(#1068,#1097),.PCURVE_S1.);-#1063 = CIRCLE('',#1064,5.E-02);-#1064 = AXIS2_PLACEMENT_3D('',#1065,#1066,#1067);-#1065 = CARTESIAN_POINT('',(-0.95,0.9,0.575));-#1066 = DIRECTION('',(0.,0.,-1.));-#1067 = DIRECTION('',(1.,0.,0.));-#1068 = PCURVE('',#897,#1069);-#1069 = DEFINITIONAL_REPRESENTATION('',(#1070),#1096);-#1070 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1071,#1072,#1073,#1074,#1075,- #1076,#1077,#1078,#1079,#1080,#1081,#1082,#1083,#1084,#1085,#1086,- #1087,#1088,#1089,#1090,#1091,#1092,#1093,#1094,#1095),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (3.14159265359,3.212992486626,3.284392319662,3.355792152698,- 3.427191985734,3.49859181877,3.569991651807,3.641391484843,- 3.712791317879,3.784191150915,3.855590983951,3.926990816987,- 3.998390650023,4.06979048306,4.141190316096,4.212590149132,- 4.283989982168,4.355389815204,4.42678964824,4.498189481276,- 4.569589314312,4.640989147349,4.712388980385),.UNSPECIFIED.);-#1071 = CARTESIAN_POINT('',(3.14159265359,0.));-#1072 = CARTESIAN_POINT('',(3.14159265359,2.379994434538E-02));-#1073 = CARTESIAN_POINT('',(3.14159265359,7.139983303613E-02));-#1074 = CARTESIAN_POINT('',(3.14159265359,0.142799666072));-#1075 = CARTESIAN_POINT('',(3.14159265359,0.214199499108));-#1076 = CARTESIAN_POINT('',(3.14159265359,0.285599332145));-#1077 = CARTESIAN_POINT('',(3.14159265359,0.356999165181));-#1078 = CARTESIAN_POINT('',(3.14159265359,0.428398998217));-#1079 = CARTESIAN_POINT('',(3.14159265359,0.499798831253));-#1080 = CARTESIAN_POINT('',(3.14159265359,0.571198664289));-#1081 = CARTESIAN_POINT('',(3.14159265359,0.642598497325));-#1082 = CARTESIAN_POINT('',(3.14159265359,0.713998330361));-#1083 = CARTESIAN_POINT('',(3.14159265359,0.785398163397));-#1084 = CARTESIAN_POINT('',(3.14159265359,0.856797996434));-#1085 = CARTESIAN_POINT('',(3.14159265359,0.92819782947));-#1086 = CARTESIAN_POINT('',(3.14159265359,0.999597662506));-#1087 = CARTESIAN_POINT('',(3.14159265359,1.070997495542));-#1088 = CARTESIAN_POINT('',(3.14159265359,1.142397328578));-#1089 = CARTESIAN_POINT('',(3.14159265359,1.213797161614));-#1090 = CARTESIAN_POINT('',(3.14159265359,1.28519699465));-#1091 = CARTESIAN_POINT('',(3.14159265359,1.356596827687));-#1092 = CARTESIAN_POINT('',(3.14159265359,1.427996660723));-#1093 = CARTESIAN_POINT('',(3.14159265359,1.499396493759));-#1094 = CARTESIAN_POINT('',(3.14159265359,1.54699638245));-#1095 = CARTESIAN_POINT('',(3.14159265359,1.570796326795));-#1096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1097 = PCURVE('',#89,#1098);-#1098 = DEFINITIONAL_REPRESENTATION('',(#1099),#1103);-#1099 = LINE('',#1100,#1101);-#1100 = CARTESIAN_POINT('',(-3.14159265359,-0.575));-#1101 = VECTOR('',#1102,1.);-#1102 = DIRECTION('',(1.,-7.067899292141E-17));-#1103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1104 = ADVANCED_FACE('',(#1105),#949,.T.);-#1105 = FACE_BOUND('',#1106,.T.);-#1106 = EDGE_LOOP('',(#1107,#1108,#1109));-#1107 = ORIENTED_EDGE('',*,*,#1012,.T.);-#1108 = ORIENTED_EDGE('',*,*,#934,.T.);-#1109 = ORIENTED_EDGE('',*,*,#1110,.F.);-#1110 = EDGE_CURVE('',#812,#130,#1111,.T.);-#1111 = SURFACE_CURVE('',#1112,(#1117,#1146),.PCURVE_S1.);-#1112 = CIRCLE('',#1113,5.E-02);-#1113 = AXIS2_PLACEMENT_3D('',#1114,#1115,#1116);-#1114 = CARTESIAN_POINT('',(-0.95,5.E-02,0.575));-#1115 = DIRECTION('',(0.,0.,-1.));-#1116 = DIRECTION('',(1.,0.,0.));-#1117 = PCURVE('',#949,#1118);-#1118 = DEFINITIONAL_REPRESENTATION('',(#1119),#1145);-#1119 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1120,#1121,#1122,#1123,#1124,- #1125,#1126,#1127,#1128,#1129,#1130,#1131,#1132,#1133,#1134,#1135,- #1136,#1137,#1138,#1139,#1140,#1141,#1142,#1143,#1144),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (1.570796326795,1.642196159831,1.713595992867,1.784995825903,- 1.856395658939,1.927795491976,1.999195325012,2.070595158048,- 2.141994991084,2.21339482412,2.284794657156,2.356194490192,- 2.427594323228,2.498994156265,2.570393989301,2.641793822337,- 2.713193655373,2.784593488409,2.855993321445,2.927393154481,- 2.998792987518,3.070192820554,3.14159265359),.UNSPECIFIED.);-#1120 = CARTESIAN_POINT('',(3.14159265359,-1.570796326795));-#1121 = CARTESIAN_POINT('',(3.14159265359,-1.54699638245));-#1122 = CARTESIAN_POINT('',(3.14159265359,-1.499396493759));-#1123 = CARTESIAN_POINT('',(3.14159265359,-1.427996660723));-#1124 = CARTESIAN_POINT('',(3.14159265359,-1.356596827687));-#1125 = CARTESIAN_POINT('',(3.14159265359,-1.28519699465));-#1126 = CARTESIAN_POINT('',(3.14159265359,-1.213797161614));-#1127 = CARTESIAN_POINT('',(3.14159265359,-1.142397328578));-#1128 = CARTESIAN_POINT('',(3.14159265359,-1.070997495542));-#1129 = CARTESIAN_POINT('',(3.14159265359,-0.999597662506));-#1130 = CARTESIAN_POINT('',(3.14159265359,-0.92819782947));-#1131 = CARTESIAN_POINT('',(3.14159265359,-0.856797996434));-#1132 = CARTESIAN_POINT('',(3.14159265359,-0.785398163397));-#1133 = CARTESIAN_POINT('',(3.14159265359,-0.713998330361));-#1134 = CARTESIAN_POINT('',(3.14159265359,-0.642598497325));-#1135 = CARTESIAN_POINT('',(3.14159265359,-0.571198664289));-#1136 = CARTESIAN_POINT('',(3.14159265359,-0.499798831253));-#1137 = CARTESIAN_POINT('',(3.14159265359,-0.428398998217));-#1138 = CARTESIAN_POINT('',(3.14159265359,-0.356999165181));-#1139 = CARTESIAN_POINT('',(3.14159265359,-0.285599332145));-#1140 = CARTESIAN_POINT('',(3.14159265359,-0.214199499108));-#1141 = CARTESIAN_POINT('',(3.14159265359,-0.142799666072));-#1142 = CARTESIAN_POINT('',(3.14159265359,-7.139983303613E-02));-#1143 = CARTESIAN_POINT('',(3.14159265359,-2.379994434538E-02));-#1144 = CARTESIAN_POINT('',(3.14159265359,2.775557561563E-16));+#1010 = PCURVE('',#87,#1011);+#1011 = DEFINITIONAL_REPRESENTATION('',(#1012),#1016);+#1012 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1013,#1014,#1015),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#1013 = CARTESIAN_POINT('',(0.,-0.575));+#1014 = CARTESIAN_POINT('',(0.785398163397,-0.575));+#1015 = CARTESIAN_POINT('',(1.570796326795,-0.575));+#1016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1017 = ADVANCED_FACE('',(#1018),#905,.T.);+#1018 = FACE_BOUND('',#1019,.T.);+#1019 = EDGE_LOOP('',(#1020,#1021,#1022));+#1020 = ORIENTED_EDGE('',*,*,#971,.T.);+#1021 = ORIENTED_EDGE('',*,*,#891,.T.);+#1022 = ORIENTED_EDGE('',*,*,#1023,.F.);+#1023 = EDGE_CURVE('',#792,#130,#1024,.T.);+#1024 = SURFACE_CURVE('',#1025,(#1029,#1036),.PCURVE_S1.);+#1025 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1026,#1027,#1028),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1026 = CARTESIAN_POINT('',(-0.95,0.,0.575));+#1027 = CARTESIAN_POINT('',(-1.,0.,0.575));+#1028 = CARTESIAN_POINT('',(-1.,6.578945E-02,0.575));+#1029 = PCURVE('',#905,#1030);+#1030 = DEFINITIONAL_REPRESENTATION('',(#1031),#1035);+#1031 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1032,#1033,#1034),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1032 = CARTESIAN_POINT('',(3.14159265359,-1.570796326795));+#1033 = CARTESIAN_POINT('',(3.14159265359,-0.785398163397));+#1034 = CARTESIAN_POINT('',(3.14159265359,2.775557561563E-16));+#1035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1036 = PCURVE('',#143,#1037);+#1037 = DEFINITIONAL_REPRESENTATION('',(#1038),#1042);+#1038 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1039,#1040,#1041),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1039 = CARTESIAN_POINT('',(4.712388980385,1.2));+#1040 = CARTESIAN_POINT('',(3.926990816987,1.2));+#1041 = CARTESIAN_POINT('',(3.14159265359,1.2));+#1042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1043 = ADVANCED_FACE('',(#1044),#565,.T.);+#1044 = FACE_BOUND('',#1045,.T.);+#1045 = EDGE_LOOP('',(#1046,#1047,#1068,#1069));+#1046 = ORIENTED_EDGE('',*,*,#699,.F.);+#1047 = ORIENTED_EDGE('',*,*,#1048,.T.);+#1048 = EDGE_CURVE('',#679,#547,#1049,.T.);+#1049 = SURFACE_CURVE('',#1050,(#1054,#1061),.PCURVE_S1.);+#1050 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1051,#1052,#1053),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1051 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.575));+#1052 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.625));+#1053 = CARTESIAN_POINT('',(-0.525,1.1842101,-0.625));+#1054 = PCURVE('',#565,#1055);+#1055 = DEFINITIONAL_REPRESENTATION('',(#1056),#1060);+#1056 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1057,#1058,#1059),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1057 = CARTESIAN_POINT('',(1.570796326795,-0.525));+#1058 = CARTESIAN_POINT('',(0.785398163397,-0.525));+#1059 = CARTESIAN_POINT('',(0.,-0.525));+#1060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1061 = PCURVE('',#322,#1062);+#1062 = DEFINITIONAL_REPRESENTATION('',(#1063),#1067);+#1063 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1064,#1065,#1066),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1064 = CARTESIAN_POINT('',(1.570796326795,6.28318530718));+#1065 = CARTESIAN_POINT('',(2.356194490192,6.28318530718));+#1066 = CARTESIAN_POINT('',(3.14159265359,6.28318530718));+#1067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1068 = ORIENTED_EDGE('',*,*,#544,.F.);+#1069 = ORIENTED_EDGE('',*,*,#1070,.F.);+#1070 = EDGE_CURVE('',#700,#545,#1071,.T.);+#1071 = SURFACE_CURVE('',#1072,(#1076,#1083),.PCURVE_S1.);+#1072 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1073,#1074,#1075),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1073 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.575));+#1074 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.625));+#1075 = CARTESIAN_POINT('',(-0.95,1.1842101,-0.625));+#1076 = PCURVE('',#565,#1077);+#1077 = DEFINITIONAL_REPRESENTATION('',(#1078),#1082);+#1078 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1079,#1080,#1081),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1079 = CARTESIAN_POINT('',(1.570796326795,-0.95));+#1080 = CARTESIAN_POINT('',(0.785398163397,-0.95));+#1081 = CARTESIAN_POINT('',(0.,-0.95));+#1082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1083 = PCURVE('',#1084,#1094);+#1084 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#1085,#1086,#1087)+ ,(#1088,#1089,#1090)+ ,(#1091,#1092,#1093+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 1.570796326795,3.14159265359),(0.,1.570796326795),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1085 = CARTESIAN_POINT('',(-0.95,1.1842101,-0.625));+#1086 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.625));+#1087 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.575));+#1088 = CARTESIAN_POINT('',(-1.,1.1842101,-0.625));+#1089 = CARTESIAN_POINT('',(-1.,1.24999955,-0.625));+#1090 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.575));+#1091 = CARTESIAN_POINT('',(-1.,1.1842101,-0.575));+#1092 = CARTESIAN_POINT('',(-1.,1.24999955,-0.575));+#1093 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.575));+#1094 = DEFINITIONAL_REPRESENTATION('',(#1095),#1099);+#1095 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1096,#1097,#1098),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1096 = CARTESIAN_POINT('',(1.570796326795,1.570796326795));+#1097 = CARTESIAN_POINT('',(1.570796326795,0.785398163397));+#1098 = CARTESIAN_POINT('',(1.570796326795,0.));+#1099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1100 = ADVANCED_FACE('',(#1101),#87,.T.);+#1101 = FACE_BOUND('',#1102,.T.);+#1102 = EDGE_LOOP('',(#1103,#1104,#1105,#1126));+#1103 = ORIENTED_EDGE('',*,*,#997,.T.);+#1104 = ORIENTED_EDGE('',*,*,#720,.F.);+#1105 = ORIENTED_EDGE('',*,*,#1106,.F.);+#1106 = EDGE_CURVE('',#69,#700,#1107,.T.);+#1107 = SURFACE_CURVE('',#1108,(#1112,#1119),.PCURVE_S1.);+#1108 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1109,#1110,#1111),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1109 = CARTESIAN_POINT('',(-1.,1.1842101,-0.575));+#1110 = CARTESIAN_POINT('',(-1.,1.24999955,-0.575));+#1111 = CARTESIAN_POINT('',(-0.95,1.24999955,-0.575));+#1112 = PCURVE('',#87,#1113);+#1113 = DEFINITIONAL_REPRESENTATION('',(#1114),#1118);+#1114 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1115,#1116,#1117),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#1115 = CARTESIAN_POINT('',(0.,0.575));+#1116 = CARTESIAN_POINT('',(0.785398163397,0.575));+#1117 = CARTESIAN_POINT('',(1.570796326795,0.575));+#1118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1119 = PCURVE('',#1084,#1120);+#1120 = DEFINITIONAL_REPRESENTATION('',(#1121),#1125);+#1121 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1122,#1123,#1124),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#1122 = CARTESIAN_POINT('',(3.14159265359,0.));+#1123 = CARTESIAN_POINT('',(3.14159265359,0.785398163397));+#1124 = CARTESIAN_POINT('',(3.14159265359,1.570796326795));+#1125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1126 = ORIENTED_EDGE('',*,*,#66,.F.);+#1127 = ADVANCED_FACE('',(#1128),#143,.T.);+#1128 = FACE_BOUND('',#1129,.T.);+#1129 = EDGE_LOOP('',(#1130,#1131,#1132,#1163));+#1130 = ORIENTED_EDGE('',*,*,#1023,.T.);+#1131 = ORIENTED_EDGE('',*,*,#129,.F.);+#1132 = ORIENTED_EDGE('',*,*,#1133,.F.);+#1133 = EDGE_CURVE('',#743,#102,#1134,.T.);+#1134 = SURFACE_CURVE('',#1135,(#1139,#1146),.PCURVE_S1.);+#1135 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1136,#1137,#1138),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1136 = CARTESIAN_POINT('',(-0.95,-2.739036081278E-17,-0.575));+#1137 = CARTESIAN_POINT('',(-1.,-4.565060135464E-17,-0.575));+#1138 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.575));+#1139 = PCURVE('',#143,#1140);+#1140 = DEFINITIONAL_REPRESENTATION('',(#1141),#1145);+#1141 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1142,#1143,#1144),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#1142 = CARTESIAN_POINT('',(4.712388980385,5.E-02));+#1143 = CARTESIAN_POINT('',(3.926990816987,5.E-02));+#1144 = CARTESIAN_POINT('',(3.14159265359,5.E-02)); #1145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1146 = PCURVE('',#145,#1147);-#1147 = DEFINITIONAL_REPRESENTATION('',(#1148),#1152);-#1148 = LINE('',#1149,#1150);-#1149 = CARTESIAN_POINT('',(6.28318530718,1.2));-#1150 = VECTOR('',#1151,1.);-#1151 = DIRECTION('',(-1.,0.));-#1152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1153 = ADVANCED_FACE('',(#1154),#571,.T.);-#1154 = FACE_BOUND('',#1155,.T.);-#1155 = EDGE_LOOP('',(#1156,#1157,#1179,#1180));-#1156 = ORIENTED_EDGE('',*,*,#711,.F.);-#1157 = ORIENTED_EDGE('',*,*,#1158,.T.);-#1158 = EDGE_CURVE('',#689,#551,#1159,.T.);-#1159 = SURFACE_CURVE('',#1160,(#1165,#1172),.PCURVE_S1.);-#1160 = CIRCLE('',#1161,5.E-02);-#1161 = AXIS2_PLACEMENT_3D('',#1162,#1163,#1164);-#1162 = CARTESIAN_POINT('',(-0.525,0.9,-0.575));-#1163 = DIRECTION('',(-1.,0.,1.734723475977E-16));-#1164 = DIRECTION('',(1.734723475977E-16,0.,1.));-#1165 = PCURVE('',#571,#1166);-#1166 = DEFINITIONAL_REPRESENTATION('',(#1167),#1171);-#1167 = LINE('',#1168,#1169);-#1168 = CARTESIAN_POINT('',(3.14159265359,-0.525));-#1169 = VECTOR('',#1170,1.);-#1170 = DIRECTION('',(-1.,0.));-#1171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1172 = PCURVE('',#329,#1173);-#1173 = DEFINITIONAL_REPRESENTATION('',(#1174),#1178);-#1174 = LINE('',#1175,#1176);-#1175 = CARTESIAN_POINT('',(0.,6.28318530718));-#1176 = VECTOR('',#1177,1.);-#1177 = DIRECTION('',(1.,0.));-#1178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1179 = ORIENTED_EDGE('',*,*,#548,.F.);-#1180 = ORIENTED_EDGE('',*,*,#1181,.F.);-#1181 = EDGE_CURVE('',#712,#549,#1182,.T.);-#1182 = SURFACE_CURVE('',#1183,(#1188,#1195),.PCURVE_S1.);-#1183 = CIRCLE('',#1184,5.E-02);-#1184 = AXIS2_PLACEMENT_3D('',#1185,#1186,#1187);-#1185 = CARTESIAN_POINT('',(-0.95,0.9,-0.575));-#1186 = DIRECTION('',(-1.,0.,0.));-#1187 = DIRECTION('',(0.,0.,1.));-#1188 = PCURVE('',#571,#1189);-#1189 = DEFINITIONAL_REPRESENTATION('',(#1190),#1194);-#1190 = LINE('',#1191,#1192);-#1191 = CARTESIAN_POINT('',(3.14159265359,-0.95));-#1192 = VECTOR('',#1193,1.);-#1193 = DIRECTION('',(-1.,0.));-#1194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1195 = PCURVE('',#1196,#1201);-#1196 = SPHERICAL_SURFACE('',#1197,5.E-02);-#1197 = AXIS2_PLACEMENT_3D('',#1198,#1199,#1200);-#1198 = CARTESIAN_POINT('',(-0.95,0.9,-0.575));-#1199 = DIRECTION('',(0.,1.,0.));-#1200 = DIRECTION('',(1.,0.,0.));-#1201 = DEFINITIONAL_REPRESENTATION('',(#1202),#1228);-#1202 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1203,#1204,#1205,#1206,#1207,- #1208,#1209,#1210,#1211,#1212,#1213,#1214,#1215,#1216,#1217,#1218,- #1219,#1220,#1221,#1222,#1223,#1224,#1225,#1226,#1227),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (1.570796326795,1.642196159831,1.713595992867,1.784995825903,- 1.856395658939,1.927795491976,1.999195325012,2.070595158048,- 2.141994991084,2.21339482412,2.284794657156,2.356194490192,- 2.427594323228,2.498994156265,2.570393989301,2.641793822337,- 2.713193655373,2.784593488409,2.855993321445,2.927393154481,- 2.998792987518,3.070192820554,3.14159265359),.UNSPECIFIED.);-#1203 = CARTESIAN_POINT('',(1.570796326795,1.570796326795));-#1204 = CARTESIAN_POINT('',(1.570796326795,1.54699638245));-#1205 = CARTESIAN_POINT('',(1.570796326795,1.499396493759));-#1206 = CARTESIAN_POINT('',(1.570796326795,1.427996660723));-#1207 = CARTESIAN_POINT('',(1.570796326795,1.356596827686));-#1208 = CARTESIAN_POINT('',(1.570796326795,1.28519699465));-#1209 = CARTESIAN_POINT('',(1.570796326795,1.213797161614));-#1210 = CARTESIAN_POINT('',(1.570796326795,1.142397328578));-#1211 = CARTESIAN_POINT('',(1.570796326795,1.070997495542));-#1212 = CARTESIAN_POINT('',(1.570796326795,0.999597662506));-#1213 = CARTESIAN_POINT('',(1.570796326795,0.92819782947));-#1214 = CARTESIAN_POINT('',(1.570796326795,0.856797996434));-#1215 = CARTESIAN_POINT('',(1.570796326795,0.785398163397));-#1216 = CARTESIAN_POINT('',(1.570796326795,0.713998330361));-#1217 = CARTESIAN_POINT('',(1.570796326795,0.642598497325));-#1218 = CARTESIAN_POINT('',(1.570796326795,0.571198664289));-#1219 = CARTESIAN_POINT('',(1.570796326795,0.499798831253));-#1220 = CARTESIAN_POINT('',(1.570796326795,0.428398998217));-#1221 = CARTESIAN_POINT('',(1.570796326795,0.356999165181));-#1222 = CARTESIAN_POINT('',(1.570796326795,0.285599332145));-#1223 = CARTESIAN_POINT('',(1.570796326795,0.214199499108));-#1224 = CARTESIAN_POINT('',(1.570796326795,0.142799666072));-#1225 = CARTESIAN_POINT('',(1.570796326795,7.139983303613E-02));-#1226 = CARTESIAN_POINT('',(1.570796326795,2.379994434538E-02));-#1227 = CARTESIAN_POINT('',(1.570796326795,0.));-#1228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1229 = ADVANCED_FACE('',(#1230),#89,.T.);-#1230 = FACE_BOUND('',#1231,.T.);-#1231 = EDGE_LOOP('',(#1232,#1233,#1234,#1278));-#1232 = ORIENTED_EDGE('',*,*,#1061,.T.);-#1233 = ORIENTED_EDGE('',*,*,#734,.F.);-#1234 = ORIENTED_EDGE('',*,*,#1235,.F.);-#1235 = EDGE_CURVE('',#69,#712,#1236,.T.);-#1236 = SURFACE_CURVE('',#1237,(#1242,#1249),.PCURVE_S1.);-#1237 = CIRCLE('',#1238,5.E-02);-#1238 = AXIS2_PLACEMENT_3D('',#1239,#1240,#1241);-#1239 = CARTESIAN_POINT('',(-0.95,0.9,-0.575));-#1240 = DIRECTION('',(0.,0.,-1.));-#1241 = DIRECTION('',(-1.,0.,0.));-#1242 = PCURVE('',#89,#1243);-#1243 = DEFINITIONAL_REPRESENTATION('',(#1244),#1248);-#1244 = LINE('',#1245,#1246);-#1245 = CARTESIAN_POINT('',(0.,0.575));-#1246 = VECTOR('',#1247,1.);-#1247 = DIRECTION('',(1.,-7.067899292141E-17));-#1248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1249 = PCURVE('',#1196,#1250);-#1250 = DEFINITIONAL_REPRESENTATION('',(#1251),#1277);-#1251 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1252,#1253,#1254,#1255,#1256,- #1257,#1258,#1259,#1260,#1261,#1262,#1263,#1264,#1265,#1266,#1267,- #1268,#1269,#1270,#1271,#1272,#1273,#1274,#1275,#1276),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (0.,7.139983303613E-02,0.142799666072,0.214199499108,0.285599332145,- 0.356999165181,0.428398998217,0.499798831253,0.571198664289,- 0.642598497325,0.713998330361,0.785398163397,0.856797996434,- 0.92819782947,0.999597662506,1.070997495542,1.142397328578,- 1.213797161614,1.28519699465,1.356596827687,1.427996660723,- 1.499396493759,1.570796326795),.UNSPECIFIED.);-#1252 = CARTESIAN_POINT('',(3.14159265359,0.));-#1253 = CARTESIAN_POINT('',(3.14159265359,2.379994434538E-02));-#1254 = CARTESIAN_POINT('',(3.14159265359,7.139983303613E-02));-#1255 = CARTESIAN_POINT('',(3.14159265359,0.142799666072));-#1256 = CARTESIAN_POINT('',(3.14159265359,0.214199499108));-#1257 = CARTESIAN_POINT('',(3.14159265359,0.285599332145));-#1258 = CARTESIAN_POINT('',(3.14159265359,0.356999165181));-#1259 = CARTESIAN_POINT('',(3.14159265359,0.428398998217));-#1260 = CARTESIAN_POINT('',(3.14159265359,0.499798831253));-#1261 = CARTESIAN_POINT('',(3.14159265359,0.571198664289));-#1262 = CARTESIAN_POINT('',(3.14159265359,0.642598497325));-#1263 = CARTESIAN_POINT('',(3.14159265359,0.713998330361));-#1264 = CARTESIAN_POINT('',(3.14159265359,0.785398163397));-#1265 = CARTESIAN_POINT('',(3.14159265359,0.856797996434));-#1266 = CARTESIAN_POINT('',(3.14159265359,0.92819782947));-#1267 = CARTESIAN_POINT('',(3.14159265359,0.999597662506));-#1268 = CARTESIAN_POINT('',(3.14159265359,1.070997495542));-#1269 = CARTESIAN_POINT('',(3.14159265359,1.142397328578));-#1270 = CARTESIAN_POINT('',(3.14159265359,1.213797161614));-#1271 = CARTESIAN_POINT('',(3.14159265359,1.28519699465));-#1272 = CARTESIAN_POINT('',(3.14159265359,1.356596827687));-#1273 = CARTESIAN_POINT('',(3.14159265359,1.427996660723));-#1274 = CARTESIAN_POINT('',(3.14159265359,1.499396493759));-#1275 = CARTESIAN_POINT('',(3.14159265359,1.54699638245));-#1276 = CARTESIAN_POINT('',(3.14159265359,1.570796326795));-#1277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1278 = ORIENTED_EDGE('',*,*,#66,.F.);-#1279 = ADVANCED_FACE('',(#1280),#145,.T.);-#1280 = FACE_BOUND('',#1281,.T.);-#1281 = EDGE_LOOP('',(#1282,#1283,#1284,#1333));-#1282 = ORIENTED_EDGE('',*,*,#1110,.T.);-#1283 = ORIENTED_EDGE('',*,*,#129,.F.);-#1284 = ORIENTED_EDGE('',*,*,#1285,.F.);-#1285 = EDGE_CURVE('',#759,#102,#1286,.T.);-#1286 = SURFACE_CURVE('',#1287,(#1292,#1299),.PCURVE_S1.);-#1287 = CIRCLE('',#1288,5.E-02);-#1288 = AXIS2_PLACEMENT_3D('',#1289,#1290,#1291);-#1289 = CARTESIAN_POINT('',(-0.95,5.E-02,-0.575));-#1290 = DIRECTION('',(0.,0.,-1.));-#1291 = DIRECTION('',(-1.,0.,0.));-#1292 = PCURVE('',#145,#1293);-#1293 = DEFINITIONAL_REPRESENTATION('',(#1294),#1298);-#1294 = LINE('',#1295,#1296);-#1295 = CARTESIAN_POINT('',(9.424777960769,5.E-02));-#1296 = VECTOR('',#1297,1.);-#1297 = DIRECTION('',(-1.,-7.067899292141E-17));-#1298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1299 = PCURVE('',#1300,#1305);-#1300 = SPHERICAL_SURFACE('',#1301,5.E-02);-#1301 = AXIS2_PLACEMENT_3D('',#1302,#1303,#1304);-#1302 = CARTESIAN_POINT('',(-0.95,5.E-02,-0.575));-#1303 = DIRECTION('',(0.,1.,0.));-#1304 = DIRECTION('',(1.,0.,0.));-#1305 = DEFINITIONAL_REPRESENTATION('',(#1306),#1332);-#1306 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1307,#1308,#1309,#1310,#1311,- #1312,#1313,#1314,#1315,#1316,#1317,#1318,#1319,#1320,#1321,#1322,- #1323,#1324,#1325,#1326,#1327,#1328,#1329,#1330,#1331),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (4.712388980385,4.783788813421,4.855188646457,4.926588479493,- 4.997988312529,5.069388145565,5.140787978601,5.212187811638,- 5.283587644674,5.35498747771,5.426387310746,5.497787143782,- 5.569186976818,5.640586809854,5.711986642891,5.783386475927,- 5.854786308963,5.926186141999,5.997585975035,6.068985808071,- 6.140385641107,6.211785474143,6.28318530718),.UNSPECIFIED.);-#1307 = CARTESIAN_POINT('',(3.14159265359,-1.570796326795));-#1308 = CARTESIAN_POINT('',(3.14159265359,-1.54699638245));-#1309 = CARTESIAN_POINT('',(3.14159265359,-1.499396493759));-#1310 = CARTESIAN_POINT('',(3.14159265359,-1.427996660723));-#1311 = CARTESIAN_POINT('',(3.14159265359,-1.356596827687));-#1312 = CARTESIAN_POINT('',(3.14159265359,-1.28519699465));-#1313 = CARTESIAN_POINT('',(3.14159265359,-1.213797161614));-#1314 = CARTESIAN_POINT('',(3.14159265359,-1.142397328578));-#1315 = CARTESIAN_POINT('',(3.14159265359,-1.070997495542));-#1316 = CARTESIAN_POINT('',(3.14159265359,-0.999597662506));-#1317 = CARTESIAN_POINT('',(3.14159265359,-0.92819782947));-#1318 = CARTESIAN_POINT('',(3.14159265359,-0.856797996434));-#1319 = CARTESIAN_POINT('',(3.14159265359,-0.785398163397));-#1320 = CARTESIAN_POINT('',(3.14159265359,-0.713998330361));-#1321 = CARTESIAN_POINT('',(3.14159265359,-0.642598497325));-#1322 = CARTESIAN_POINT('',(3.14159265359,-0.571198664289));-#1323 = CARTESIAN_POINT('',(3.14159265359,-0.499798831253));-#1324 = CARTESIAN_POINT('',(3.14159265359,-0.428398998217));-#1325 = CARTESIAN_POINT('',(3.14159265359,-0.356999165181));-#1326 = CARTESIAN_POINT('',(3.14159265359,-0.285599332145));-#1327 = CARTESIAN_POINT('',(3.14159265359,-0.214199499108));-#1328 = CARTESIAN_POINT('',(3.14159265359,-0.142799666072));-#1329 = CARTESIAN_POINT('',(3.14159265359,-7.139983303613E-02));-#1330 = CARTESIAN_POINT('',(3.14159265359,-2.379994434538E-02));-#1331 = CARTESIAN_POINT('',(3.14159265359,-2.775557561563E-16));-#1332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1333 = ORIENTED_EDGE('',*,*,#834,.F.);-#1334 = ADVANCED_FACE('',(#1335),#622,.T.);-#1335 = FACE_BOUND('',#1336,.T.);-#1336 = EDGE_LOOP('',(#1337,#1338,#1360,#1361));-#1337 = ORIENTED_EDGE('',*,*,#606,.F.);-#1338 = ORIENTED_EDGE('',*,*,#1339,.T.);-#1339 = EDGE_CURVE('',#584,#761,#1340,.T.);-#1340 = SURFACE_CURVE('',#1341,(#1346,#1353),.PCURVE_S1.);-#1341 = CIRCLE('',#1342,5.E-02);-#1342 = AXIS2_PLACEMENT_3D('',#1343,#1344,#1345);-#1343 = CARTESIAN_POINT('',(-0.525,5.E-02,-0.575));-#1344 = DIRECTION('',(-1.,0.,1.734723475977E-16));-#1345 = DIRECTION('',(1.734723475977E-16,0.,1.));-#1346 = PCURVE('',#622,#1347);-#1347 = DEFINITIONAL_REPRESENTATION('',(#1348),#1352);-#1348 = LINE('',#1349,#1350);-#1349 = CARTESIAN_POINT('',(0.,-0.475));-#1350 = VECTOR('',#1351,1.);-#1351 = DIRECTION('',(1.,0.));-#1352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1353 = PCURVE('',#507,#1354);-#1354 = DEFINITIONAL_REPRESENTATION('',(#1355),#1359);-#1355 = LINE('',#1356,#1357);-#1356 = CARTESIAN_POINT('',(0.,6.28318530718));-#1357 = VECTOR('',#1358,1.);-#1358 = DIRECTION('',(1.,0.));-#1359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1360 = ORIENTED_EDGE('',*,*,#758,.F.);-#1361 = ORIENTED_EDGE('',*,*,#1362,.F.);-#1362 = EDGE_CURVE('',#607,#759,#1363,.T.);-#1363 = SURFACE_CURVE('',#1364,(#1369,#1376),.PCURVE_S1.);-#1364 = CIRCLE('',#1365,5.E-02);-#1365 = AXIS2_PLACEMENT_3D('',#1366,#1367,#1368);-#1366 = CARTESIAN_POINT('',(-0.95,5.E-02,-0.575));-#1367 = DIRECTION('',(-1.,0.,0.));-#1368 = DIRECTION('',(0.,0.,1.));-#1369 = PCURVE('',#622,#1370);-#1370 = DEFINITIONAL_REPRESENTATION('',(#1371),#1375);-#1371 = LINE('',#1372,#1373);-#1372 = CARTESIAN_POINT('',(0.,-5.E-02));-#1373 = VECTOR('',#1374,1.);-#1374 = DIRECTION('',(1.,0.));-#1375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1376 = PCURVE('',#1300,#1377);-#1377 = DEFINITIONAL_REPRESENTATION('',(#1378),#1404);-#1378 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1379,#1380,#1381,#1382,#1383,- #1384,#1385,#1386,#1387,#1388,#1389,#1390,#1391,#1392,#1393,#1394,- #1395,#1396,#1397,#1398,#1399,#1400,#1401,#1402,#1403),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (3.14159265359,3.212992486626,3.284392319662,3.355792152698,- 3.427191985734,3.49859181877,3.569991651807,3.641391484843,- 3.712791317879,3.784191150915,3.855590983951,3.926990816987,- 3.998390650023,4.06979048306,4.141190316096,4.212590149132,- 4.283989982168,4.355389815204,4.42678964824,4.498189481276,- 4.569589314312,4.640989147349,4.712388980385),.UNSPECIFIED.);-#1379 = CARTESIAN_POINT('',(1.570796326795,5.551115123126E-16));-#1380 = CARTESIAN_POINT('',(1.570796326795,-2.379994434538E-02));-#1381 = CARTESIAN_POINT('',(1.570796326795,-7.139983303613E-02));-#1382 = CARTESIAN_POINT('',(1.570796326795,-0.142799666072));-#1383 = CARTESIAN_POINT('',(1.570796326795,-0.214199499108));-#1384 = CARTESIAN_POINT('',(1.570796326795,-0.285599332145));-#1385 = CARTESIAN_POINT('',(1.570796326795,-0.356999165181));-#1386 = CARTESIAN_POINT('',(1.570796326795,-0.428398998217));-#1387 = CARTESIAN_POINT('',(1.570796326795,-0.499798831253));-#1388 = CARTESIAN_POINT('',(1.570796326795,-0.571198664289));-#1389 = CARTESIAN_POINT('',(1.570796326795,-0.642598497325));-#1390 = CARTESIAN_POINT('',(1.570796326795,-0.713998330361));-#1391 = CARTESIAN_POINT('',(1.570796326795,-0.785398163397));-#1392 = CARTESIAN_POINT('',(1.570796326795,-0.856797996434));-#1393 = CARTESIAN_POINT('',(1.570796326795,-0.92819782947));-#1394 = CARTESIAN_POINT('',(1.570796326795,-0.999597662506));-#1395 = CARTESIAN_POINT('',(1.570796326795,-1.070997495542));-#1396 = CARTESIAN_POINT('',(1.570796326795,-1.142397328578));-#1397 = CARTESIAN_POINT('',(1.570796326795,-1.213797161614));-#1398 = CARTESIAN_POINT('',(1.570796326795,-1.28519699465));-#1399 = CARTESIAN_POINT('',(1.570796326795,-1.356596827687));-#1400 = CARTESIAN_POINT('',(1.570796326795,-1.427996660723));-#1401 = CARTESIAN_POINT('',(1.570796326795,-1.499396493759));-#1402 = CARTESIAN_POINT('',(1.570796326795,-1.54699638245));-#1403 = CARTESIAN_POINT('',(1.570796326795,-1.570796326795));-#1404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1405 = ADVANCED_FACE('',(#1406),#1196,.T.);-#1406 = FACE_BOUND('',#1407,.T.);-#1407 = EDGE_LOOP('',(#1408,#1409,#1410));-#1408 = ORIENTED_EDGE('',*,*,#1235,.T.);-#1409 = ORIENTED_EDGE('',*,*,#1181,.T.);-#1410 = ORIENTED_EDGE('',*,*,#1411,.F.);-#1411 = EDGE_CURVE('',#69,#549,#1412,.T.);-#1412 = SURFACE_CURVE('',#1413,(#1418,#1425),.PCURVE_S1.);-#1413 = CIRCLE('',#1414,5.E-02);-#1414 = AXIS2_PLACEMENT_3D('',#1415,#1416,#1417);-#1415 = CARTESIAN_POINT('',(-0.95,0.9,-0.575));-#1416 = DIRECTION('',(0.,-1.,0.));-#1417 = DIRECTION('',(0.,0.,1.));-#1418 = PCURVE('',#1196,#1419);-#1419 = DEFINITIONAL_REPRESENTATION('',(#1420),#1424);-#1420 = LINE('',#1421,#1422);-#1421 = CARTESIAN_POINT('',(4.712388980385,0.));-#1422 = VECTOR('',#1423,1.);-#1423 = DIRECTION('',(-1.,0.));-#1424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1425 = PCURVE('',#117,#1426);-#1426 = DEFINITIONAL_REPRESENTATION('',(#1427),#1431);-#1427 = LINE('',#1428,#1429);-#1428 = CARTESIAN_POINT('',(3.14159265359,5.E-02));-#1429 = VECTOR('',#1430,1.);-#1430 = DIRECTION('',(1.,0.));-#1431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1432 = ADVANCED_FACE('',(#1433),#1300,.T.);-#1433 = FACE_BOUND('',#1434,.T.);-#1434 = EDGE_LOOP('',(#1435,#1436,#1437));-#1435 = ORIENTED_EDGE('',*,*,#1362,.T.);-#1436 = ORIENTED_EDGE('',*,*,#1285,.T.);-#1437 = ORIENTED_EDGE('',*,*,#1438,.F.);-#1438 = EDGE_CURVE('',#607,#102,#1439,.T.);-#1439 = SURFACE_CURVE('',#1440,(#1445,#1452),.PCURVE_S1.);-#1440 = CIRCLE('',#1441,5.E-02);-#1441 = AXIS2_PLACEMENT_3D('',#1442,#1443,#1444);-#1442 = CARTESIAN_POINT('',(-0.95,5.E-02,-0.575));-#1443 = DIRECTION('',(0.,1.,0.));-#1444 = DIRECTION('',(0.,0.,-1.));-#1445 = PCURVE('',#1300,#1446);-#1446 = DEFINITIONAL_REPRESENTATION('',(#1447),#1451);-#1447 = LINE('',#1448,#1449);-#1448 = CARTESIAN_POINT('',(1.570796326795,4.163336342344E-16));-#1449 = VECTOR('',#1450,1.);-#1450 = DIRECTION('',(1.,0.));-#1451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1452 = PCURVE('',#117,#1453);-#1453 = DEFINITIONAL_REPRESENTATION('',(#1454),#1458);-#1454 = LINE('',#1455,#1456);-#1455 = CARTESIAN_POINT('',(6.28318530718,0.9));-#1456 = VECTOR('',#1457,1.);-#1457 = DIRECTION('',(-1.,0.));-#1458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1459 = ADVANCED_FACE('',(#1460),#117,.T.);-#1460 = FACE_BOUND('',#1461,.T.);-#1461 = EDGE_LOOP('',(#1462,#1463,#1464,#1465));-#1462 = ORIENTED_EDGE('',*,*,#1411,.T.);-#1463 = ORIENTED_EDGE('',*,*,#634,.F.);-#1464 = ORIENTED_EDGE('',*,*,#1438,.T.);-#1465 = ORIENTED_EDGE('',*,*,#101,.F.);-#1466 = ADVANCED_FACE('',(#1467),#474,.T.);-#1467 = FACE_BOUND('',#1468,.T.);-#1468 = EDGE_LOOP('',(#1469,#1491,#1492,#1514));-#1469 = ORIENTED_EDGE('',*,*,#1470,.F.);-#1470 = EDGE_CURVE('',#459,#761,#1471,.T.);-#1471 = SURFACE_CURVE('',#1472,(#1477,#1484),.PCURVE_S1.);-#1472 = CIRCLE('',#1473,2.5E-02);-#1473 = AXIS2_PLACEMENT_3D('',#1474,#1475,#1476);-#1474 = CARTESIAN_POINT('',(-0.525,2.5E-02,-0.575));-#1475 = DIRECTION('',(0.,0.,-1.));-#1476 = DIRECTION('',(-1.,0.,0.));-#1477 = PCURVE('',#474,#1478);-#1478 = DEFINITIONAL_REPRESENTATION('',(#1479),#1483);-#1479 = LINE('',#1480,#1481);-#1480 = CARTESIAN_POINT('',(0.,-5.E-02));-#1481 = VECTOR('',#1482,1.);-#1482 = DIRECTION('',(1.,0.));-#1483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1484 = PCURVE('',#507,#1485);-#1485 = DEFINITIONAL_REPRESENTATION('',(#1486),#1490);-#1486 = LINE('',#1487,#1488);-#1487 = CARTESIAN_POINT('',(4.712388980385,1.570796326795));-#1488 = VECTOR('',#1489,1.);-#1489 = DIRECTION('',(0.,1.));-#1490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1491 = ORIENTED_EDGE('',*,*,#458,.F.);-#1492 = ORIENTED_EDGE('',*,*,#1493,.F.);-#1493 = EDGE_CURVE('',#789,#426,#1494,.T.);-#1494 = SURFACE_CURVE('',#1495,(#1500,#1507),.PCURVE_S1.);-#1495 = CIRCLE('',#1496,2.5E-02);-#1496 = AXIS2_PLACEMENT_3D('',#1497,#1498,#1499);-#1497 = CARTESIAN_POINT('',(-0.525,2.5E-02,0.575));-#1498 = DIRECTION('',(0.,0.,1.));-#1499 = DIRECTION('',(1.,0.,-0.));-#1500 = PCURVE('',#474,#1501);-#1501 = DEFINITIONAL_REPRESENTATION('',(#1502),#1506);-#1502 = LINE('',#1503,#1504);-#1503 = CARTESIAN_POINT('',(9.424777960769,-1.2));-#1504 = VECTOR('',#1505,1.);-#1505 = DIRECTION('',(-1.,0.));-#1506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1507 = PCURVE('',#446,#1508);-#1508 = DEFINITIONAL_REPRESENTATION('',(#1509),#1513);-#1509 = LINE('',#1510,#1511);-#1510 = CARTESIAN_POINT('',(4.712388980385,10.995574287564));-#1511 = VECTOR('',#1512,1.);-#1512 = DIRECTION('',(0.,-1.));-#1513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1514 = ORIENTED_EDGE('',*,*,#788,.F.);-#1515 = ADVANCED_FACE('',(#1516),#446,.T.);-#1516 = FACE_BOUND('',#1517,.T.);-#1517 = EDGE_LOOP('',(#1518,#1519,#1520,#1542));-#1518 = ORIENTED_EDGE('',*,*,#1493,.T.);-#1519 = ORIENTED_EDGE('',*,*,#425,.F.);-#1520 = ORIENTED_EDGE('',*,*,#1521,.F.);-#1521 = EDGE_CURVE('',#189,#403,#1522,.T.);-#1522 = SURFACE_CURVE('',#1523,(#1528,#1535),.PCURVE_S1.);-#1523 = CIRCLE('',#1524,2.5E-02);-#1524 = AXIS2_PLACEMENT_3D('',#1525,#1526,#1527);-#1525 = CARTESIAN_POINT('',(-0.525,5.E-02,0.6));-#1526 = DIRECTION('',(-0.,1.,0.));-#1527 = DIRECTION('',(0.,0.,1.));-#1528 = PCURVE('',#446,#1529);-#1529 = DEFINITIONAL_REPRESENTATION('',(#1530),#1534);-#1530 = LINE('',#1531,#1532);-#1531 = CARTESIAN_POINT('',(6.28318530718,6.28318530718));-#1532 = VECTOR('',#1533,1.);-#1533 = DIRECTION('',(0.,-1.));-#1534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1535 = PCURVE('',#237,#1536);-#1536 = DEFINITIONAL_REPRESENTATION('',(#1537),#1541);-#1537 = LINE('',#1538,#1539);-#1538 = CARTESIAN_POINT('',(3.14159265359,0.9));-#1539 = VECTOR('',#1540,1.);-#1540 = DIRECTION('',(-1.,0.));-#1541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1542 = ORIENTED_EDGE('',*,*,#989,.F.);-#1543 = ADVANCED_FACE('',(#1544),#507,.T.);-#1544 = FACE_BOUND('',#1545,.T.);-#1545 = EDGE_LOOP('',(#1546,#1547,#1548,#1570));-#1546 = ORIENTED_EDGE('',*,*,#1470,.T.);-#1547 = ORIENTED_EDGE('',*,*,#1339,.F.);-#1548 = ORIENTED_EDGE('',*,*,#1549,.F.);-#1549 = EDGE_CURVE('',#487,#584,#1550,.T.);-#1550 = SURFACE_CURVE('',#1551,(#1556,#1563),.PCURVE_S1.);-#1551 = CIRCLE('',#1552,2.5E-02);-#1552 = AXIS2_PLACEMENT_3D('',#1553,#1554,#1555);-#1553 = CARTESIAN_POINT('',(-0.525,5.E-02,-0.6));-#1554 = DIRECTION('',(-0.,1.,0.));-#1555 = DIRECTION('',(0.,0.,1.));-#1556 = PCURVE('',#507,#1557);-#1557 = DEFINITIONAL_REPRESENTATION('',(#1558),#1562);-#1558 = LINE('',#1559,#1560);-#1559 = CARTESIAN_POINT('',(3.14159265359,3.14159265359));-#1560 = VECTOR('',#1561,1.);-#1561 = DIRECTION('',(0.,1.));-#1562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1563 = PCURVE('',#533,#1564);-#1564 = DEFINITIONAL_REPRESENTATION('',(#1565),#1569);-#1565 = LINE('',#1566,#1567);-#1566 = CARTESIAN_POINT('',(3.14159265359,0.9));-#1567 = VECTOR('',#1568,1.);-#1568 = DIRECTION('',(-1.,0.));-#1569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1570 = ORIENTED_EDGE('',*,*,#486,.F.);-#1571 = ADVANCED_FACE('',(#1572),#237,.T.);-#1572 = FACE_BOUND('',#1573,.T.);-#1573 = EDGE_LOOP('',(#1574,#1575,#1576,#1598));-#1574 = ORIENTED_EDGE('',*,*,#1521,.T.);-#1575 = ORIENTED_EDGE('',*,*,#402,.F.);-#1576 = ORIENTED_EDGE('',*,*,#1577,.F.);-#1577 = EDGE_CURVE('',#222,#370,#1578,.T.);-#1578 = SURFACE_CURVE('',#1579,(#1584,#1591),.PCURVE_S1.);-#1579 = CIRCLE('',#1580,2.5E-02);-#1580 = AXIS2_PLACEMENT_3D('',#1581,#1582,#1583);-#1581 = CARTESIAN_POINT('',(-0.525,0.9,0.6));-#1582 = DIRECTION('',(-0.,1.,0.));-#1583 = DIRECTION('',(0.,0.,1.));-#1584 = PCURVE('',#237,#1585);-#1585 = DEFINITIONAL_REPRESENTATION('',(#1586),#1590);-#1586 = LINE('',#1587,#1588);-#1587 = CARTESIAN_POINT('',(3.14159265359,5.E-02));-#1588 = VECTOR('',#1589,1.);-#1589 = DIRECTION('',(-1.,0.));-#1590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1591 = PCURVE('',#390,#1592);-#1592 = DEFINITIONAL_REPRESENTATION('',(#1593),#1597);-#1593 = LINE('',#1594,#1595);-#1594 = CARTESIAN_POINT('',(0.,6.28318530718));-#1595 = VECTOR('',#1596,1.);-#1596 = DIRECTION('',(0.,-1.));-#1597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1598 = ORIENTED_EDGE('',*,*,#221,.F.);-#1599 = ADVANCED_FACE('',(#1600),#533,.T.);-#1600 = FACE_BOUND('',#1601,.T.);-#1601 = EDGE_LOOP('',(#1602,#1603,#1604,#1626));-#1602 = ORIENTED_EDGE('',*,*,#1549,.T.);-#1603 = ORIENTED_EDGE('',*,*,#583,.F.);-#1604 = ORIENTED_EDGE('',*,*,#1605,.F.);-#1605 = EDGE_CURVE('',#302,#551,#1606,.T.);-#1606 = SURFACE_CURVE('',#1607,(#1612,#1619),.PCURVE_S1.);-#1607 = CIRCLE('',#1608,2.5E-02);-#1608 = AXIS2_PLACEMENT_3D('',#1609,#1610,#1611);-#1609 = CARTESIAN_POINT('',(-0.525,0.9,-0.6));-#1610 = DIRECTION('',(-0.,1.,0.));-#1611 = DIRECTION('',(0.,0.,1.));-#1612 = PCURVE('',#533,#1613);-#1613 = DEFINITIONAL_REPRESENTATION('',(#1614),#1618);-#1614 = LINE('',#1615,#1616);-#1615 = CARTESIAN_POINT('',(3.14159265359,5.E-02));-#1616 = VECTOR('',#1617,1.);-#1617 = DIRECTION('',(-1.,0.));-#1618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1619 = PCURVE('',#329,#1620);-#1620 = DEFINITIONAL_REPRESENTATION('',(#1621),#1625);-#1621 = LINE('',#1622,#1623);-#1622 = CARTESIAN_POINT('',(3.14159265359,3.14159265359));-#1623 = VECTOR('',#1624,1.);-#1624 = DIRECTION('',(0.,1.));-#1625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1626 = ORIENTED_EDGE('',*,*,#519,.F.);-#1627 = ADVANCED_FACE('',(#1628),#390,.T.);-#1628 = FACE_BOUND('',#1629,.T.);-#1629 = EDGE_LOOP('',(#1630,#1631,#1632,#1654));-#1630 = ORIENTED_EDGE('',*,*,#1577,.T.);-#1631 = ORIENTED_EDGE('',*,*,#369,.F.);-#1632 = ORIENTED_EDGE('',*,*,#1633,.F.);-#1633 = EDGE_CURVE('',#661,#342,#1634,.T.);-#1634 = SURFACE_CURVE('',#1635,(#1640,#1647),.PCURVE_S1.);-#1635 = CIRCLE('',#1636,2.5E-02);-#1636 = AXIS2_PLACEMENT_3D('',#1637,#1638,#1639);-#1637 = CARTESIAN_POINT('',(-0.525,0.925,0.575));-#1638 = DIRECTION('',(0.,0.,-1.));-#1639 = DIRECTION('',(-1.,0.,0.));-#1640 = PCURVE('',#390,#1641);-#1641 = DEFINITIONAL_REPRESENTATION('',(#1642),#1646);-#1642 = LINE('',#1643,#1644);-#1643 = CARTESIAN_POINT('',(1.570796326795,7.853981633974));-#1644 = VECTOR('',#1645,1.);-#1645 = DIRECTION('',(0.,-1.));-#1646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1647 = PCURVE('',#357,#1648);-#1648 = DEFINITIONAL_REPRESENTATION('',(#1649),#1653);-#1649 = LINE('',#1650,#1651);-#1650 = CARTESIAN_POINT('',(3.14159265359,0.575));-#1651 = VECTOR('',#1652,1.);-#1652 = DIRECTION('',(-1.,0.));-#1653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1654 = ORIENTED_EDGE('',*,*,#859,.F.);-#1655 = ADVANCED_FACE('',(#1656),#329,.T.);-#1656 = FACE_BOUND('',#1657,.T.);-#1657 = EDGE_LOOP('',(#1658,#1659,#1660,#1682));-#1658 = ORIENTED_EDGE('',*,*,#1605,.T.);-#1659 = ORIENTED_EDGE('',*,*,#1158,.F.);-#1660 = ORIENTED_EDGE('',*,*,#1661,.F.);-#1661 = EDGE_CURVE('',#304,#689,#1662,.T.);-#1662 = SURFACE_CURVE('',#1663,(#1668,#1675),.PCURVE_S1.);-#1663 = CIRCLE('',#1664,2.5E-02);-#1664 = AXIS2_PLACEMENT_3D('',#1665,#1666,#1667);-#1665 = CARTESIAN_POINT('',(-0.525,0.925,-0.575));-#1666 = DIRECTION('',(0.,0.,1.));-#1667 = DIRECTION('',(1.,0.,-0.));-#1668 = PCURVE('',#329,#1669);-#1669 = DEFINITIONAL_REPRESENTATION('',(#1670),#1674);-#1670 = LINE('',#1671,#1672);-#1671 = CARTESIAN_POINT('',(1.570796326795,4.712388980385));-#1672 = VECTOR('',#1673,1.);-#1673 = DIRECTION('',(0.,1.));-#1674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1675 = PCURVE('',#357,#1676);-#1676 = DEFINITIONAL_REPRESENTATION('',(#1677),#1681);-#1677 = LINE('',#1678,#1679);-#1678 = CARTESIAN_POINT('',(0.,-0.575));-#1679 = VECTOR('',#1680,1.);-#1680 = DIRECTION('',(1.,0.));-#1681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1682 = ORIENTED_EDGE('',*,*,#301,.F.);-#1683 = ADVANCED_FACE('',(#1684),#357,.T.);-#1684 = FACE_BOUND('',#1685,.T.);-#1685 = EDGE_LOOP('',(#1686,#1687,#1688,#1689));-#1686 = ORIENTED_EDGE('',*,*,#1633,.T.);-#1687 = ORIENTED_EDGE('',*,*,#341,.F.);-#1688 = ORIENTED_EDGE('',*,*,#1661,.T.);-#1689 = ORIENTED_EDGE('',*,*,#688,.F.);-#1690 = MANIFOLD_SOLID_BREP('',#1691);-#1691 = CLOSED_SHELL('',(#1692,#1812,#1927,#2158,#2268,#2368,#2468,#2544- ,#2598,#2669,#2718,#2767,#2843,#2893,#2948,#3019,#3046,#3073,#3080,- #3129,#3157,#3185,#3213,#3241,#3269,#3297));-#1692 = ADVANCED_FACE('',(#1693),#1707,.F.);-#1693 = FACE_BOUND('',#1694,.T.);-#1694 = EDGE_LOOP('',(#1695,#1730,#1758,#1786));+#1146 = PCURVE('',#1147,#1157);+#1147 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#1148,#1149,#1150)+ ,(#1151,#1152,#1153)+ ,(#1154,#1155,#1156+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 1.570796326795,3.14159265359),(-1.570796326795,4.440892098501E-16),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1148 = CARTESIAN_POINT('',(-0.95,0.,-0.575));+#1149 = CARTESIAN_POINT('',(-0.95,0.,-0.625));+#1150 = CARTESIAN_POINT('',(-0.95,6.578945E-02,-0.625));+#1151 = CARTESIAN_POINT('',(-0.95,0.,-0.575));+#1152 = CARTESIAN_POINT('',(-1.,0.,-0.625));+#1153 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.625));+#1154 = CARTESIAN_POINT('',(-0.95,0.,-0.575));+#1155 = CARTESIAN_POINT('',(-1.,0.,-0.575));+#1156 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.575));+#1157 = DEFINITIONAL_REPRESENTATION('',(#1158),#1162);+#1158 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1159,#1160,#1161),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#1159 = CARTESIAN_POINT('',(3.14159265359,-1.570796326795));+#1160 = CARTESIAN_POINT('',(3.14159265359,-0.785398163397));+#1161 = CARTESIAN_POINT('',(3.14159265359,-2.775557561563E-16));+#1162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1163 = ORIENTED_EDGE('',*,*,#812,.F.);+#1164 = ADVANCED_FACE('',(#1165),#614,.T.);+#1165 = FACE_BOUND('',#1166,.T.);+#1166 = EDGE_LOOP('',(#1167,#1168,#1189,#1190));+#1167 = ORIENTED_EDGE('',*,*,#600,.F.);+#1168 = ORIENTED_EDGE('',*,*,#1169,.T.);+#1169 = EDGE_CURVE('',#580,#745,#1170,.T.);+#1170 = SURFACE_CURVE('',#1171,(#1175,#1182),.PCURVE_S1.);+#1171 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1172,#1173,#1174),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1172 = CARTESIAN_POINT('',(-0.525,6.578945E-02,-0.625));+#1173 = CARTESIAN_POINT('',(-0.525,1.826024054186E-17,-0.625));+#1174 = CARTESIAN_POINT('',(-0.525,0.,-0.575));+#1175 = PCURVE('',#614,#1176);+#1176 = DEFINITIONAL_REPRESENTATION('',(#1177),#1181);+#1177 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1178,#1179,#1180),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#1178 = CARTESIAN_POINT('',(3.14159265359,-0.475));+#1179 = CARTESIAN_POINT('',(3.926990816987,-0.475));+#1180 = CARTESIAN_POINT('',(4.712388980385,-0.475));+#1181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1182 = PCURVE('',#498,#1183);+#1183 = DEFINITIONAL_REPRESENTATION('',(#1184),#1188);+#1184 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1185,#1186,#1187),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#1185 = CARTESIAN_POINT('',(3.14159265359,6.28318530718));+#1186 = CARTESIAN_POINT('',(3.926990816987,6.28318530718));+#1187 = CARTESIAN_POINT('',(4.712388980385,6.28318530718));+#1188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1189 = ORIENTED_EDGE('',*,*,#742,.F.);+#1190 = ORIENTED_EDGE('',*,*,#1191,.F.);+#1191 = EDGE_CURVE('',#601,#743,#1192,.T.);+#1192 = SURFACE_CURVE('',#1193,(#1197,#1204),.PCURVE_S1.);+#1193 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1194,#1195,#1196),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1194 = CARTESIAN_POINT('',(-0.95,6.578945E-02,-0.625));+#1195 = CARTESIAN_POINT('',(-0.95,1.826024054186E-17,-0.625));+#1196 = CARTESIAN_POINT('',(-0.95,0.,-0.575));+#1197 = PCURVE('',#614,#1198);+#1198 = DEFINITIONAL_REPRESENTATION('',(#1199),#1203);+#1199 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1200,#1201,#1202),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#1200 = CARTESIAN_POINT('',(3.14159265359,-5.E-02));+#1201 = CARTESIAN_POINT('',(3.926990816987,-5.E-02));+#1202 = CARTESIAN_POINT('',(4.712388980385,-5.E-02));+#1203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1204 = PCURVE('',#1147,#1205);+#1205 = DEFINITIONAL_REPRESENTATION('',(#1206),#1210);+#1206 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1207,#1208,#1209),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#1207 = CARTESIAN_POINT('',(1.570796326795,5.551115123126E-16));+#1208 = CARTESIAN_POINT('',(1.570796326795,-0.785398163397));+#1209 = CARTESIAN_POINT('',(1.570796326795,-1.570796326795));+#1210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1211 = ADVANCED_FACE('',(#1212),#1084,.T.);+#1212 = FACE_BOUND('',#1213,.T.);+#1213 = EDGE_LOOP('',(#1214,#1215,#1216));+#1214 = ORIENTED_EDGE('',*,*,#1106,.T.);+#1215 = ORIENTED_EDGE('',*,*,#1070,.T.);+#1216 = ORIENTED_EDGE('',*,*,#1217,.F.);+#1217 = EDGE_CURVE('',#69,#545,#1218,.T.);+#1218 = SURFACE_CURVE('',#1219,(#1223,#1230),.PCURVE_S1.);+#1219 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1220,#1221,#1222),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1220 = CARTESIAN_POINT('',(-1.,1.1842101,-0.575));+#1221 = CARTESIAN_POINT('',(-1.,1.1842101,-0.625));+#1222 = CARTESIAN_POINT('',(-0.95,1.1842101,-0.625));+#1223 = PCURVE('',#1084,#1224);+#1224 = DEFINITIONAL_REPRESENTATION('',(#1225),#1229);+#1225 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1226,#1227,#1228),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1226 = CARTESIAN_POINT('',(3.14159265359,0.));+#1227 = CARTESIAN_POINT('',(2.356194490192,0.));+#1228 = CARTESIAN_POINT('',(1.570796326795,0.));+#1229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1230 = PCURVE('',#115,#1231);+#1231 = DEFINITIONAL_REPRESENTATION('',(#1232),#1236);+#1232 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1233,#1234,#1235),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1233 = CARTESIAN_POINT('',(4.712388980385,5.E-02));+#1234 = CARTESIAN_POINT('',(5.497787143782,5.E-02));+#1235 = CARTESIAN_POINT('',(6.28318530718,5.E-02));+#1236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1237 = ADVANCED_FACE('',(#1238),#1147,.T.);+#1238 = FACE_BOUND('',#1239,.T.);+#1239 = EDGE_LOOP('',(#1240,#1241,#1242));+#1240 = ORIENTED_EDGE('',*,*,#1191,.T.);+#1241 = ORIENTED_EDGE('',*,*,#1133,.T.);+#1242 = ORIENTED_EDGE('',*,*,#1243,.F.);+#1243 = EDGE_CURVE('',#601,#102,#1244,.T.);+#1244 = SURFACE_CURVE('',#1245,(#1249,#1256),.PCURVE_S1.);+#1245 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1246,#1247,#1248),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1246 = CARTESIAN_POINT('',(-0.95,6.578945E-02,-0.625));+#1247 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.625));+#1248 = CARTESIAN_POINT('',(-1.,6.578945E-02,-0.575));+#1249 = PCURVE('',#1147,#1250);+#1250 = DEFINITIONAL_REPRESENTATION('',(#1251),#1255);+#1251 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1252,#1253,#1254),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#1252 = CARTESIAN_POINT('',(1.570796326795,4.163336342344E-16));+#1253 = CARTESIAN_POINT('',(2.356194490192,4.163336342344E-16));+#1254 = CARTESIAN_POINT('',(3.14159265359,4.163336342344E-16));+#1255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1256 = PCURVE('',#115,#1257);+#1257 = DEFINITIONAL_REPRESENTATION('',(#1258),#1262);+#1258 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1259,#1260,#1261),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#1259 = CARTESIAN_POINT('',(6.28318530718,0.9));+#1260 = CARTESIAN_POINT('',(5.497787143782,0.9));+#1261 = CARTESIAN_POINT('',(4.712388980385,0.9));+#1262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1263 = ADVANCED_FACE('',(#1264),#115,.T.);+#1264 = FACE_BOUND('',#1265,.T.);+#1265 = EDGE_LOOP('',(#1266,#1267,#1268,#1269));+#1266 = ORIENTED_EDGE('',*,*,#1217,.T.);+#1267 = ORIENTED_EDGE('',*,*,#628,.F.);+#1268 = ORIENTED_EDGE('',*,*,#1243,.T.);+#1269 = ORIENTED_EDGE('',*,*,#101,.F.);+#1270 = ADVANCED_FACE('',(#1271),#468,.T.);+#1271 = FACE_BOUND('',#1272,.T.);+#1272 = EDGE_LOOP('',(#1273,#1294,#1295,#1316));+#1273 = ORIENTED_EDGE('',*,*,#1274,.F.);+#1274 = EDGE_CURVE('',#455,#745,#1275,.T.);+#1275 = SURFACE_CURVE('',#1276,(#1280,#1287),.PCURVE_S1.);+#1276 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1277,#1278,#1279),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1277 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#1278 = CARTESIAN_POINT('',(-0.5,9.130120270928E-18,-0.575));+#1279 = CARTESIAN_POINT('',(-0.525,0.,-0.575));+#1280 = PCURVE('',#468,#1281);+#1281 = DEFINITIONAL_REPRESENTATION('',(#1282),#1286);+#1282 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1283,#1284,#1285),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#1283 = CARTESIAN_POINT('',(3.14159265359,-5.E-02));+#1284 = CARTESIAN_POINT('',(3.926990816987,-5.E-02));+#1285 = CARTESIAN_POINT('',(4.712388980385,-5.E-02));+#1286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1287 = PCURVE('',#498,#1288);+#1288 = DEFINITIONAL_REPRESENTATION('',(#1289),#1293);+#1289 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1290,#1291,#1292),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#1290 = CARTESIAN_POINT('',(4.712388980385,4.712388980385));+#1291 = CARTESIAN_POINT('',(4.712388980385,5.497787143782));+#1292 = CARTESIAN_POINT('',(4.712388980385,6.28318530718));+#1293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1294 = ORIENTED_EDGE('',*,*,#454,.F.);+#1295 = ORIENTED_EDGE('',*,*,#1296,.F.);+#1296 = EDGE_CURVE('',#771,#422,#1297,.T.);+#1297 = SURFACE_CURVE('',#1298,(#1302,#1309),.PCURVE_S1.);+#1298 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1299,#1300,#1301),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1299 = CARTESIAN_POINT('',(-0.525,5.934578176103E-17,0.575));+#1300 = CARTESIAN_POINT('',(-0.5,5.021566149011E-17,0.575));+#1301 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#1302 = PCURVE('',#468,#1303);+#1303 = DEFINITIONAL_REPRESENTATION('',(#1304),#1308);+#1304 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1305,#1306,#1307),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#1305 = CARTESIAN_POINT('',(4.712388980385,-1.2));+#1306 = CARTESIAN_POINT('',(3.926990816987,-1.2));+#1307 = CARTESIAN_POINT('',(3.14159265359,-1.2));+#1308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1309 = PCURVE('',#437,#1310);+#1310 = DEFINITIONAL_REPRESENTATION('',(#1311),#1315);+#1311 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1312,#1313,#1314),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#1312 = CARTESIAN_POINT('',(4.712388980385,6.28318530718));+#1313 = CARTESIAN_POINT('',(4.712388980385,5.497787143782));+#1314 = CARTESIAN_POINT('',(4.712388980385,4.712388980385));+#1315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1316 = ORIENTED_EDGE('',*,*,#770,.F.);+#1317 = ADVANCED_FACE('',(#1318),#437,.T.);+#1318 = FACE_BOUND('',#1319,.T.);+#1319 = EDGE_LOOP('',(#1320,#1321,#1322,#1343));+#1320 = ORIENTED_EDGE('',*,*,#1296,.T.);+#1321 = ORIENTED_EDGE('',*,*,#421,.F.);+#1322 = ORIENTED_EDGE('',*,*,#1323,.F.);+#1323 = EDGE_CURVE('',#189,#401,#1324,.T.);+#1324 = SURFACE_CURVE('',#1325,(#1329,#1336),.PCURVE_S1.);+#1325 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1326,#1327,#1328),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1326 = CARTESIAN_POINT('',(-0.525,6.578945E-02,0.625));+#1327 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.625));+#1328 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#1329 = PCURVE('',#437,#1330);+#1330 = DEFINITIONAL_REPRESENTATION('',(#1331),#1335);+#1331 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1332,#1333,#1334),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#1332 = CARTESIAN_POINT('',(6.28318530718,6.28318530718));+#1333 = CARTESIAN_POINT('',(6.28318530718,5.497787143782));+#1334 = CARTESIAN_POINT('',(6.28318530718,4.712388980385));+#1335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1336 = PCURVE('',#235,#1337);+#1337 = DEFINITIONAL_REPRESENTATION('',(#1338),#1342);+#1338 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1339,#1340,#1341),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#1339 = CARTESIAN_POINT('',(3.14159265359,0.9));+#1340 = CARTESIAN_POINT('',(2.356194490192,0.9));+#1341 = CARTESIAN_POINT('',(1.570796326795,0.9));+#1342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1343 = ORIENTED_EDGE('',*,*,#949,.F.);+#1344 = ADVANCED_FACE('',(#1345),#498,.T.);+#1345 = FACE_BOUND('',#1346,.T.);+#1346 = EDGE_LOOP('',(#1347,#1348,#1349,#1370));+#1347 = ORIENTED_EDGE('',*,*,#1274,.T.);+#1348 = ORIENTED_EDGE('',*,*,#1169,.F.);+#1349 = ORIENTED_EDGE('',*,*,#1350,.F.);+#1350 = EDGE_CURVE('',#483,#580,#1351,.T.);+#1351 = SURFACE_CURVE('',#1352,(#1356,#1363),.PCURVE_S1.);+#1352 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1353,#1354,#1355),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1353 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#1354 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.625));+#1355 = CARTESIAN_POINT('',(-0.525,6.578945E-02,-0.625));+#1356 = PCURVE('',#498,#1357);+#1357 = DEFINITIONAL_REPRESENTATION('',(#1358),#1362);+#1358 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1359,#1360,#1361),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1359 = CARTESIAN_POINT('',(3.14159265359,4.712388980385));+#1360 = CARTESIAN_POINT('',(3.14159265359,5.497787143782));+#1361 = CARTESIAN_POINT('',(3.14159265359,6.28318530718));+#1362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1363 = PCURVE('',#527,#1364);+#1364 = DEFINITIONAL_REPRESENTATION('',(#1365),#1369);+#1365 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1366,#1367,#1368),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1366 = CARTESIAN_POINT('',(1.570796326795,0.9));+#1367 = CARTESIAN_POINT('',(0.785398163397,0.9));+#1368 = CARTESIAN_POINT('',(4.440892098501E-15,0.9));+#1369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1370 = ORIENTED_EDGE('',*,*,#482,.F.);+#1371 = ADVANCED_FACE('',(#1372),#235,.T.);+#1372 = FACE_BOUND('',#1373,.T.);+#1373 = EDGE_LOOP('',(#1374,#1375,#1376,#1397));+#1374 = ORIENTED_EDGE('',*,*,#1323,.T.);+#1375 = ORIENTED_EDGE('',*,*,#400,.F.);+#1376 = ORIENTED_EDGE('',*,*,#1377,.F.);+#1377 = EDGE_CURVE('',#222,#368,#1378,.T.);+#1378 = SURFACE_CURVE('',#1379,(#1383,#1390),.PCURVE_S1.);+#1379 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1380,#1381,#1382),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1380 = CARTESIAN_POINT('',(-0.525,1.1842101,0.625));+#1381 = CARTESIAN_POINT('',(-0.5,1.1842101,0.625));+#1382 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#1383 = PCURVE('',#235,#1384);+#1384 = DEFINITIONAL_REPRESENTATION('',(#1385),#1389);+#1385 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1386,#1387,#1388),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#1386 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#1387 = CARTESIAN_POINT('',(2.356194490192,5.E-02));+#1388 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#1389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1390 = PCURVE('',#383,#1391);+#1391 = DEFINITIONAL_REPRESENTATION('',(#1392),#1396);+#1392 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1393,#1394,#1395),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#1393 = CARTESIAN_POINT('',(0.,6.28318530718));+#1394 = CARTESIAN_POINT('',(0.,5.497787143782));+#1395 = CARTESIAN_POINT('',(0.,4.712388980385));+#1396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1397 = ORIENTED_EDGE('',*,*,#221,.F.);+#1398 = ADVANCED_FACE('',(#1399),#527,.T.);+#1399 = FACE_BOUND('',#1400,.T.);+#1400 = EDGE_LOOP('',(#1401,#1402,#1403,#1424));+#1401 = ORIENTED_EDGE('',*,*,#1350,.T.);+#1402 = ORIENTED_EDGE('',*,*,#579,.F.);+#1403 = ORIENTED_EDGE('',*,*,#1404,.F.);+#1404 = EDGE_CURVE('',#300,#547,#1405,.T.);+#1405 = SURFACE_CURVE('',#1406,(#1410,#1417),.PCURVE_S1.);+#1406 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1407,#1408,#1409),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1407 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6));+#1408 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.625));+#1409 = CARTESIAN_POINT('',(-0.525,1.1842101,-0.625));+#1410 = PCURVE('',#527,#1411);+#1411 = DEFINITIONAL_REPRESENTATION('',(#1412),#1416);+#1412 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1413,#1414,#1415),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1413 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#1414 = CARTESIAN_POINT('',(0.785398163397,5.E-02));+#1415 = CARTESIAN_POINT('',(0.,5.E-02));+#1416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1417 = PCURVE('',#322,#1418);+#1418 = DEFINITIONAL_REPRESENTATION('',(#1419),#1423);+#1419 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1420,#1421,#1422),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1420 = CARTESIAN_POINT('',(3.14159265359,4.712388980385));+#1421 = CARTESIAN_POINT('',(3.14159265359,5.497787143782));+#1422 = CARTESIAN_POINT('',(3.14159265359,6.28318530718));+#1423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1424 = ORIENTED_EDGE('',*,*,#515,.F.);+#1425 = ADVANCED_FACE('',(#1426),#383,.T.);+#1426 = FACE_BOUND('',#1427,.T.);+#1427 = EDGE_LOOP('',(#1428,#1429,#1430,#1451));+#1428 = ORIENTED_EDGE('',*,*,#1377,.T.);+#1429 = ORIENTED_EDGE('',*,*,#367,.F.);+#1430 = ORIENTED_EDGE('',*,*,#1431,.F.);+#1431 = EDGE_CURVE('',#653,#340,#1432,.T.);+#1432 = SURFACE_CURVE('',#1433,(#1437,#1444),.PCURVE_S1.);+#1433 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1434,#1435,#1436),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1434 = CARTESIAN_POINT('',(-0.525,1.24999955,0.575));+#1435 = CARTESIAN_POINT('',(-0.5,1.24999955,0.575));+#1436 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#1437 = PCURVE('',#383,#1438);+#1438 = DEFINITIONAL_REPRESENTATION('',(#1439),#1443);+#1439 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1440,#1441,#1442),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1440 = CARTESIAN_POINT('',(1.570796326795,6.28318530718));+#1441 = CARTESIAN_POINT('',(1.570796326795,5.497787143782));+#1442 = CARTESIAN_POINT('',(1.570796326795,4.712388980385));+#1443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1444 = PCURVE('',#353,#1445);+#1445 = DEFINITIONAL_REPRESENTATION('',(#1446),#1450);+#1446 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1447,#1448,#1449),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1447 = CARTESIAN_POINT('',(1.570796326795,0.575));+#1448 = CARTESIAN_POINT('',(0.785398163397,0.575));+#1449 = CARTESIAN_POINT('',(4.440892098501E-15,0.575));+#1450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1451 = ORIENTED_EDGE('',*,*,#835,.F.);+#1452 = ADVANCED_FACE('',(#1453),#322,.T.);+#1453 = FACE_BOUND('',#1454,.T.);+#1454 = EDGE_LOOP('',(#1455,#1456,#1457,#1478));+#1455 = ORIENTED_EDGE('',*,*,#1404,.T.);+#1456 = ORIENTED_EDGE('',*,*,#1048,.F.);+#1457 = ORIENTED_EDGE('',*,*,#1458,.F.);+#1458 = EDGE_CURVE('',#302,#679,#1459,.T.);+#1459 = SURFACE_CURVE('',#1460,(#1464,#1471),.PCURVE_S1.);+#1460 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1461,#1462,#1463),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1461 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#1462 = CARTESIAN_POINT('',(-0.5,1.24999955,-0.575));+#1463 = CARTESIAN_POINT('',(-0.525,1.24999955,-0.575));+#1464 = PCURVE('',#322,#1465);+#1465 = DEFINITIONAL_REPRESENTATION('',(#1466),#1470);+#1466 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1467,#1468,#1469),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#1467 = CARTESIAN_POINT('',(1.570796326795,4.712388980385));+#1468 = CARTESIAN_POINT('',(1.570796326795,5.497787143782));+#1469 = CARTESIAN_POINT('',(1.570796326795,6.28318530718));+#1470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1471 = PCURVE('',#353,#1472);+#1472 = DEFINITIONAL_REPRESENTATION('',(#1473),#1477);+#1473 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1474,#1475,#1476),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#1474 = CARTESIAN_POINT('',(0.,-0.575));+#1475 = CARTESIAN_POINT('',(0.785398163397,-0.575));+#1476 = CARTESIAN_POINT('',(1.570796326795,-0.575));+#1477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1478 = ORIENTED_EDGE('',*,*,#299,.F.);+#1479 = ADVANCED_FACE('',(#1480),#353,.T.);+#1480 = FACE_BOUND('',#1481,.T.);+#1481 = EDGE_LOOP('',(#1482,#1483,#1484,#1485));+#1482 = ORIENTED_EDGE('',*,*,#1431,.T.);+#1483 = ORIENTED_EDGE('',*,*,#339,.F.);+#1484 = ORIENTED_EDGE('',*,*,#1458,.T.);+#1485 = ORIENTED_EDGE('',*,*,#678,.F.);+#1486 = MANIFOLD_SOLID_BREP('',#1487);+#1487 = CLOSED_SHELL('',(#1488,#1608,#1721,#1966,#2072,#2164,#2256,#2313+ ,#2370,#2417,#2443,#2469,#2526,#2553,#2590,#2637,#2663,#2689,#2696,+ #2743,#2770,#2797,#2824,#2851,#2878,#2905));+#1488 = ADVANCED_FACE('',(#1489),#1502,.F.);+#1489 = FACE_BOUND('',#1490,.T.);+#1490 = EDGE_LOOP('',(#1491,#1526,#1554,#1582));+#1491 = ORIENTED_EDGE('',*,*,#1492,.F.);+#1492 = EDGE_CURVE('',#1493,#1495,#1497,.T.);+#1493 = VERTEX_POINT('',#1494);+#1494 = CARTESIAN_POINT('',(1.,1.1842101,0.575));+#1495 = VERTEX_POINT('',#1496);+#1496 = CARTESIAN_POINT('',(1.,1.1842101,-0.575));+#1497 = SURFACE_CURVE('',#1498,(#1501,#1512),.PCURVE_S1.);+#1498 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1499,#1500),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1499 = CARTESIAN_POINT('',(1.,1.1842101,0.575));+#1500 = CARTESIAN_POINT('',(1.,1.1842101,-0.575));+#1501 = PCURVE('',#1502,#1507);+#1502 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1503,#1504)+ ,(#1505,#1506+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-1.2,-5.E-02),(5.E-02,0.9),+ .PIECEWISE_BEZIER_KNOTS.);+#1503 = CARTESIAN_POINT('',(1.,1.1842101,0.575));+#1504 = CARTESIAN_POINT('',(1.,6.578945E-02,0.575));+#1505 = CARTESIAN_POINT('',(1.,1.1842101,-0.575));+#1506 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.575));+#1507 = DEFINITIONAL_REPRESENTATION('',(#1508),#1511);+#1508 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1509,#1510),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1509 = CARTESIAN_POINT('',(-1.2,5.E-02));+#1510 = CARTESIAN_POINT('',(-5.E-02,5.E-02));+#1511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1512 = PCURVE('',#1513,#1520);+#1513 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#1514,#1515)+ ,(#1516,#1517)+ ,(#1518,#1519+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 4.712388980385,6.28318530718),(-0.575,0.575),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1514 = CARTESIAN_POINT('',(0.95,1.24999955,0.575));+#1515 = CARTESIAN_POINT('',(0.95,1.24999955,-0.575));+#1516 = CARTESIAN_POINT('',(1.,1.24999955,0.575));+#1517 = CARTESIAN_POINT('',(1.,1.24999955,-0.575));+#1518 = CARTESIAN_POINT('',(1.,1.1842101,0.575));+#1519 = CARTESIAN_POINT('',(1.,1.1842101,-0.575));+#1520 = DEFINITIONAL_REPRESENTATION('',(#1521),#1525);+#1521 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1522,#1523,#1524),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1522 = CARTESIAN_POINT('',(6.28318530718,-0.575));+#1523 = CARTESIAN_POINT('',(6.28318530718,1.714314964495E-16));+#1524 = CARTESIAN_POINT('',(6.28318530718,0.575));+#1525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1526 = ORIENTED_EDGE('',*,*,#1527,.F.);+#1527 = EDGE_CURVE('',#1528,#1493,#1530,.T.);+#1528 = VERTEX_POINT('',#1529);+#1529 = CARTESIAN_POINT('',(1.,6.578945E-02,0.575));+#1530 = SURFACE_CURVE('',#1531,(#1534,#1540),.PCURVE_S1.);+#1531 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1532,#1533),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1532 = CARTESIAN_POINT('',(1.,6.578945E-02,0.575));+#1533 = CARTESIAN_POINT('',(1.,1.1842101,0.575));+#1534 = PCURVE('',#1502,#1535);+#1535 = DEFINITIONAL_REPRESENTATION('',(#1536),#1539);+#1536 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1537,#1538),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1537 = CARTESIAN_POINT('',(-1.2,0.9));+#1538 = CARTESIAN_POINT('',(-1.2,5.E-02));+#1539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1540 = PCURVE('',#1541,#1548);+#1541 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#1542,#1543)+ ,(#1544,#1545)+ ,(#1546,#1547+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 1.570796326795,3.14159265359),(5.E-02,0.9),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1542 = CARTESIAN_POINT('',(1.,1.1842101,0.575));+#1543 = CARTESIAN_POINT('',(1.,6.578945E-02,0.575));+#1544 = CARTESIAN_POINT('',(1.,1.1842101,0.625));+#1545 = CARTESIAN_POINT('',(1.,6.578945E-02,0.625));+#1546 = CARTESIAN_POINT('',(0.95,1.1842101,0.625));+#1547 = CARTESIAN_POINT('',(0.95,6.578945E-02,0.625));+#1548 = DEFINITIONAL_REPRESENTATION('',(#1549),#1553);+#1549 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1550,#1551,#1552),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1550 = CARTESIAN_POINT('',(1.570796326795,0.9));+#1551 = CARTESIAN_POINT('',(1.570796326795,0.475));+#1552 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#1553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1554 = ORIENTED_EDGE('',*,*,#1555,.F.);+#1555 = EDGE_CURVE('',#1556,#1528,#1558,.T.);+#1556 = VERTEX_POINT('',#1557);+#1557 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.575));+#1558 = SURFACE_CURVE('',#1559,(#1562,#1568),.PCURVE_S1.);+#1559 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1560,#1561),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,1.2),.PIECEWISE_BEZIER_KNOTS.);+#1560 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.575));+#1561 = CARTESIAN_POINT('',(1.,6.578945E-02,0.575));+#1562 = PCURVE('',#1502,#1563);+#1563 = DEFINITIONAL_REPRESENTATION('',(#1564),#1567);+#1564 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1565,#1566),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,1.2),.PIECEWISE_BEZIER_KNOTS.);+#1565 = CARTESIAN_POINT('',(-5.E-02,0.9));+#1566 = CARTESIAN_POINT('',(-1.2,0.9));+#1567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1568 = PCURVE('',#1569,#1576);+#1569 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#1570,#1571)+ ,(#1572,#1573)+ ,(#1574,#1575+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 1.570796326795,3.14159265359),(5.E-02,1.2),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1570 = CARTESIAN_POINT('',(0.95,0.,-0.575));+#1571 = CARTESIAN_POINT('',(0.95,0.,0.575));+#1572 = CARTESIAN_POINT('',(1.,0.,-0.575));+#1573 = CARTESIAN_POINT('',(1.,0.,0.575));+#1574 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.575));+#1575 = CARTESIAN_POINT('',(1.,6.578945E-02,0.575));+#1576 = DEFINITIONAL_REPRESENTATION('',(#1577),#1581);+#1577 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1578,#1579,#1580),+ .UNSPECIFIED.,.F.,.F.,(3,3),(5.E-02,1.2),.PIECEWISE_BEZIER_KNOTS.);+#1578 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#1579 = CARTESIAN_POINT('',(3.14159265359,0.625));+#1580 = CARTESIAN_POINT('',(3.14159265359,1.2));+#1581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1582 = ORIENTED_EDGE('',*,*,#1583,.F.);+#1583 = EDGE_CURVE('',#1495,#1556,#1584,.T.);+#1584 = SURFACE_CURVE('',#1585,(#1588,#1594),.PCURVE_S1.);+#1585 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1586,#1587),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#1586 = CARTESIAN_POINT('',(1.,1.1842101,-0.575));+#1587 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.575));+#1588 = PCURVE('',#1502,#1589);+#1589 = DEFINITIONAL_REPRESENTATION('',(#1590),#1593);+#1590 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1591,#1592),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#1591 = CARTESIAN_POINT('',(-5.E-02,5.E-02));+#1592 = CARTESIAN_POINT('',(-5.E-02,0.9));+#1593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1594 = PCURVE('',#1595,#1602);+#1595 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#1596,#1597)+ ,(#1598,#1599)+ ,(#1600,#1601+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 0.,1.570796326795),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1596 = CARTESIAN_POINT('',(0.95,1.1842101,-0.625));+#1597 = CARTESIAN_POINT('',(0.95,6.578945E-02,-0.625));+#1598 = CARTESIAN_POINT('',(1.,1.1842101,-0.625));+#1599 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.625));+#1600 = CARTESIAN_POINT('',(1.,1.1842101,-0.575));+#1601 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.575));+#1602 = DEFINITIONAL_REPRESENTATION('',(#1603),#1607);+#1603 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1604,#1605,#1606),+ .UNSPECIFIED.,.F.,.F.,(3,3),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#1604 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#1605 = CARTESIAN_POINT('',(1.570796326795,0.475));+#1606 = CARTESIAN_POINT('',(1.570796326795,0.9));+#1607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1608 = ADVANCED_FACE('',(#1609),#1622,.F.);+#1609 = FACE_BOUND('',#1610,.T.);+#1610 = EDGE_LOOP('',(#1611,#1646,#1667,#1695));+#1611 = ORIENTED_EDGE('',*,*,#1612,.F.);+#1612 = EDGE_CURVE('',#1613,#1615,#1617,.T.);+#1613 = VERTEX_POINT('',#1614);+#1614 = CARTESIAN_POINT('',(0.95,6.578945E-02,0.625));+#1615 = VERTEX_POINT('',#1616);+#1616 = CARTESIAN_POINT('',(0.525,6.578945E-02,0.625));+#1617 = SURFACE_CURVE('',#1618,(#1621,#1632),.PCURVE_S1.);+#1618 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1619,#1620),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,0.475),.PIECEWISE_BEZIER_KNOTS.);+#1619 = CARTESIAN_POINT('',(0.95,6.578945E-02,0.625));+#1620 = CARTESIAN_POINT('',(0.525,6.578945E-02,0.625));+#1621 = PCURVE('',#1622,#1627);+#1622 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1623,#1624)+ ,(#1625,#1626+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-0.475,-5.E-02),(5.E-02,+ 0.9),.PIECEWISE_BEZIER_KNOTS.);+#1623 = CARTESIAN_POINT('',(0.525,1.1842101,0.625));+#1624 = CARTESIAN_POINT('',(0.525,6.578945E-02,0.625));+#1625 = CARTESIAN_POINT('',(0.95,1.1842101,0.625));+#1626 = CARTESIAN_POINT('',(0.95,6.578945E-02,0.625));+#1627 = DEFINITIONAL_REPRESENTATION('',(#1628),#1631);+#1628 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1629,#1630),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,0.475),.PIECEWISE_BEZIER_KNOTS.);+#1629 = CARTESIAN_POINT('',(-5.E-02,0.9));+#1630 = CARTESIAN_POINT('',(-0.475,0.9));+#1631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1632 = PCURVE('',#1633,#1640);+#1633 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#1634,#1635)+ ,(#1636,#1637)+ ,(#1638,#1639+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 1.570796326795,3.14159265359),(5.E-02,0.475),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1634 = CARTESIAN_POINT('',(0.95,0.,0.575));+#1635 = CARTESIAN_POINT('',(0.525,0.,0.575));+#1636 = CARTESIAN_POINT('',(0.95,0.,0.625));+#1637 = CARTESIAN_POINT('',(0.525,0.,0.625));+#1638 = CARTESIAN_POINT('',(0.95,6.578945E-02,0.625));+#1639 = CARTESIAN_POINT('',(0.525,6.578945E-02,0.625));+#1640 = DEFINITIONAL_REPRESENTATION('',(#1641),#1645);+#1641 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1642,#1643,#1644),+ .UNSPECIFIED.,.F.,.F.,(3,3),(5.E-02,0.475),.PIECEWISE_BEZIER_KNOTS.);+#1642 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#1643 = CARTESIAN_POINT('',(3.14159265359,0.2625));+#1644 = CARTESIAN_POINT('',(3.14159265359,0.475));+#1645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1646 = ORIENTED_EDGE('',*,*,#1647,.F.);+#1647 = EDGE_CURVE('',#1648,#1613,#1650,.T.);+#1648 = VERTEX_POINT('',#1649);+#1649 = CARTESIAN_POINT('',(0.95,1.1842101,0.625));+#1650 = SURFACE_CURVE('',#1651,(#1654,#1660),.PCURVE_S1.);+#1651 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1652,#1653),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#1652 = CARTESIAN_POINT('',(0.95,1.1842101,0.625));+#1653 = CARTESIAN_POINT('',(0.95,6.578945E-02,0.625));+#1654 = PCURVE('',#1622,#1655);+#1655 = DEFINITIONAL_REPRESENTATION('',(#1656),#1659);+#1656 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1657,#1658),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#1657 = CARTESIAN_POINT('',(-5.E-02,5.E-02));+#1658 = CARTESIAN_POINT('',(-5.E-02,0.9));+#1659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1660 = PCURVE('',#1541,#1661);+#1661 = DEFINITIONAL_REPRESENTATION('',(#1662),#1666);+#1662 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1663,#1664,#1665),+ .UNSPECIFIED.,.F.,.F.,(3,3),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#1663 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#1664 = CARTESIAN_POINT('',(3.14159265359,0.475));+#1665 = CARTESIAN_POINT('',(3.14159265359,0.9));+#1666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1667 = ORIENTED_EDGE('',*,*,#1668,.F.);+#1668 = EDGE_CURVE('',#1669,#1648,#1671,.T.);+#1669 = VERTEX_POINT('',#1670);+#1670 = CARTESIAN_POINT('',(0.525,1.1842101,0.625));+#1671 = SURFACE_CURVE('',#1672,(#1675,#1681),.PCURVE_S1.);+#1672 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1673,#1674),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1673 = CARTESIAN_POINT('',(0.525,1.1842101,0.625));+#1674 = CARTESIAN_POINT('',(0.95,1.1842101,0.625));+#1675 = PCURVE('',#1622,#1676);+#1676 = DEFINITIONAL_REPRESENTATION('',(#1677),#1680);+#1677 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1678,#1679),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1678 = CARTESIAN_POINT('',(-0.475,5.E-02));+#1679 = CARTESIAN_POINT('',(-5.E-02,5.E-02));+#1680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1681 = PCURVE('',#1682,#1689);+#1682 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#1683,#1684)+ ,(#1685,#1686)+ ,(#1687,#1688+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 4.712388980385,6.28318530718),(0.525,0.95),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1683 = CARTESIAN_POINT('',(0.525,1.24999955,0.575));+#1684 = CARTESIAN_POINT('',(0.95,1.24999955,0.575));+#1685 = CARTESIAN_POINT('',(0.525,1.24999955,0.625));+#1686 = CARTESIAN_POINT('',(0.95,1.24999955,0.625));+#1687 = CARTESIAN_POINT('',(0.525,1.1842101,0.625));+#1688 = CARTESIAN_POINT('',(0.95,1.1842101,0.625));+#1689 = DEFINITIONAL_REPRESENTATION('',(#1690),#1694);+#1690 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1691,#1692,#1693),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.475,-5.E-02),+ .PIECEWISE_BEZIER_KNOTS.);+#1691 = CARTESIAN_POINT('',(6.28318530718,0.525));+#1692 = CARTESIAN_POINT('',(6.28318530718,0.7375));+#1693 = CARTESIAN_POINT('',(6.28318530718,0.95));+#1694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) ); #1695 = ORIENTED_EDGE('',*,*,#1696,.F.);-#1696 = EDGE_CURVE('',#1697,#1699,#1701,.T.);-#1697 = VERTEX_POINT('',#1698);-#1698 = CARTESIAN_POINT('',(1.,0.9,0.575));-#1699 = VERTEX_POINT('',#1700);-#1700 = CARTESIAN_POINT('',(1.,0.9,-0.575));-#1701 = SURFACE_CURVE('',#1702,(#1706,#1718),.PCURVE_S1.);-#1702 = LINE('',#1703,#1704);-#1703 = CARTESIAN_POINT('',(1.,0.9,-0.625));-#1704 = VECTOR('',#1705,1.);-#1705 = DIRECTION('',(1.734723475977E-16,-0.,-1.));-#1706 = PCURVE('',#1707,#1712);-#1707 = PLANE('',#1708);-#1708 = AXIS2_PLACEMENT_3D('',#1709,#1710,#1711);-#1709 = CARTESIAN_POINT('',(1.,0.95,-0.625));-#1710 = DIRECTION('',(-1.,0.,-1.734723475977E-16));-#1711 = DIRECTION('',(1.734723475977E-16,0.,-1.));-#1712 = DEFINITIONAL_REPRESENTATION('',(#1713),#1717);-#1713 = LINE('',#1714,#1715);-#1714 = CARTESIAN_POINT('',(0.,5.E-02));-#1715 = VECTOR('',#1716,1.);-#1716 = DIRECTION('',(1.,0.));-#1717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1718 = PCURVE('',#1719,#1724);-#1719 = CYLINDRICAL_SURFACE('',#1720,5.E-02);-#1720 = AXIS2_PLACEMENT_3D('',#1721,#1722,#1723);-#1721 = CARTESIAN_POINT('',(0.95,0.9,1.647987302178E-16));-#1722 = DIRECTION('',(1.734723475977E-16,0.,-1.));-#1723 = DIRECTION('',(1.,0.,1.734723475977E-16));-#1724 = DEFINITIONAL_REPRESENTATION('',(#1725),#1729);-#1725 = LINE('',#1726,#1727);-#1726 = CARTESIAN_POINT('',(6.28318530718,0.625));-#1727 = VECTOR('',#1728,1.);-#1728 = DIRECTION('',(0.,1.));-#1729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1730 = ORIENTED_EDGE('',*,*,#1731,.F.);-#1731 = EDGE_CURVE('',#1732,#1697,#1734,.T.);-#1732 = VERTEX_POINT('',#1733);-#1733 = CARTESIAN_POINT('',(1.,5.E-02,0.575));-#1734 = SURFACE_CURVE('',#1735,(#1739,#1746),.PCURVE_S1.);-#1735 = LINE('',#1736,#1737);-#1736 = CARTESIAN_POINT('',(1.,0.95,0.575));-#1737 = VECTOR('',#1738,1.);-#1738 = DIRECTION('',(-0.,1.,-0.));-#1739 = PCURVE('',#1707,#1740);-#1740 = DEFINITIONAL_REPRESENTATION('',(#1741),#1745);-#1741 = LINE('',#1742,#1743);-#1742 = CARTESIAN_POINT('',(-1.2,-0.));-#1743 = VECTOR('',#1744,1.);-#1744 = DIRECTION('',(0.,-1.));-#1745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1746 = PCURVE('',#1747,#1752);-#1747 = CYLINDRICAL_SURFACE('',#1748,5.E-02);-#1748 = AXIS2_PLACEMENT_3D('',#1749,#1750,#1751);-#1749 = CARTESIAN_POINT('',(0.95,0.95,0.575));-#1750 = DIRECTION('',(0.,-1.,0.));-#1751 = DIRECTION('',(0.,0.,-1.));-#1752 = DEFINITIONAL_REPRESENTATION('',(#1753),#1757);-#1753 = LINE('',#1754,#1755);-#1754 = CARTESIAN_POINT('',(1.570796326795,0.));-#1755 = VECTOR('',#1756,1.);-#1756 = DIRECTION('',(0.,-1.));-#1757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1758 = ORIENTED_EDGE('',*,*,#1759,.F.);-#1759 = EDGE_CURVE('',#1760,#1732,#1762,.T.);-#1760 = VERTEX_POINT('',#1761);-#1761 = CARTESIAN_POINT('',(1.,5.E-02,-0.575));-#1762 = SURFACE_CURVE('',#1763,(#1767,#1774),.PCURVE_S1.);-#1763 = LINE('',#1764,#1765);-#1764 = CARTESIAN_POINT('',(1.,5.E-02,-0.625));-#1765 = VECTOR('',#1766,1.);-#1766 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#1767 = PCURVE('',#1707,#1768);-#1768 = DEFINITIONAL_REPRESENTATION('',(#1769),#1773);-#1769 = LINE('',#1770,#1771);-#1770 = CARTESIAN_POINT('',(0.,0.9));-#1771 = VECTOR('',#1772,1.);-#1772 = DIRECTION('',(-1.,-0.));-#1773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1774 = PCURVE('',#1775,#1780);-#1775 = CYLINDRICAL_SURFACE('',#1776,5.E-02);-#1776 = AXIS2_PLACEMENT_3D('',#1777,#1778,#1779);-#1777 = CARTESIAN_POINT('',(0.95,5.E-02,-0.625));-#1778 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#1779 = DIRECTION('',(-1.,0.,-1.734723475977E-16));-#1780 = DEFINITIONAL_REPRESENTATION('',(#1781),#1785);-#1781 = LINE('',#1782,#1783);-#1782 = CARTESIAN_POINT('',(3.14159265359,-1.110223024625E-16));-#1783 = VECTOR('',#1784,1.);-#1784 = DIRECTION('',(0.,1.));-#1785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1786 = ORIENTED_EDGE('',*,*,#1787,.F.);-#1787 = EDGE_CURVE('',#1699,#1760,#1788,.T.);-#1788 = SURFACE_CURVE('',#1789,(#1793,#1800),.PCURVE_S1.);-#1789 = LINE('',#1790,#1791);-#1790 = CARTESIAN_POINT('',(1.,0.95,-0.575));-#1791 = VECTOR('',#1792,1.);-#1792 = DIRECTION('',(0.,-1.,0.));-#1793 = PCURVE('',#1707,#1794);-#1794 = DEFINITIONAL_REPRESENTATION('',(#1795),#1799);-#1795 = LINE('',#1796,#1797);-#1796 = CARTESIAN_POINT('',(-5.E-02,0.));-#1797 = VECTOR('',#1798,1.);-#1798 = DIRECTION('',(0.,1.));-#1799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1800 = PCURVE('',#1801,#1806);-#1801 = CYLINDRICAL_SURFACE('',#1802,5.E-02);-#1802 = AXIS2_PLACEMENT_3D('',#1803,#1804,#1805);-#1803 = CARTESIAN_POINT('',(0.95,0.95,-0.575));-#1804 = DIRECTION('',(0.,-1.,0.));-#1805 = DIRECTION('',(0.,0.,-1.));-#1806 = DEFINITIONAL_REPRESENTATION('',(#1807),#1811);-#1807 = LINE('',#1808,#1809);-#1808 = CARTESIAN_POINT('',(1.570796326795,0.));-#1809 = VECTOR('',#1810,1.);-#1810 = DIRECTION('',(0.,1.));-#1811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1812 = ADVANCED_FACE('',(#1813),#1827,.F.);-#1813 = FACE_BOUND('',#1814,.T.);-#1814 = EDGE_LOOP('',(#1815,#1850,#1873,#1901));-#1815 = ORIENTED_EDGE('',*,*,#1816,.F.);-#1816 = EDGE_CURVE('',#1817,#1819,#1821,.T.);-#1817 = VERTEX_POINT('',#1818);-#1818 = CARTESIAN_POINT('',(0.95,5.E-02,0.625));-#1819 = VERTEX_POINT('',#1820);-#1820 = CARTESIAN_POINT('',(0.525,5.E-02,0.625));-#1821 = SURFACE_CURVE('',#1822,(#1826,#1838),.PCURVE_S1.);-#1822 = LINE('',#1823,#1824);-#1823 = CARTESIAN_POINT('',(1.,5.E-02,0.625));-#1824 = VECTOR('',#1825,1.);-#1825 = DIRECTION('',(-1.,0.,2.168404344971E-16));-#1826 = PCURVE('',#1827,#1832);-#1827 = PLANE('',#1828);-#1828 = AXIS2_PLACEMENT_3D('',#1829,#1830,#1831);-#1829 = CARTESIAN_POINT('',(1.,0.95,0.625));-#1830 = DIRECTION('',(-2.168404344971E-16,0.,-1.));-#1831 = DIRECTION('',(1.,0.,-2.168404344971E-16));-#1832 = DEFINITIONAL_REPRESENTATION('',(#1833),#1837);-#1833 = LINE('',#1834,#1835);-#1834 = CARTESIAN_POINT('',(0.,0.9));-#1835 = VECTOR('',#1836,1.);-#1836 = DIRECTION('',(-1.,-0.));-#1837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1838 = PCURVE('',#1839,#1844);-#1839 = CYLINDRICAL_SURFACE('',#1840,5.E-02);-#1840 = AXIS2_PLACEMENT_3D('',#1841,#1842,#1843);-#1841 = CARTESIAN_POINT('',(1.,5.E-02,0.575));-#1842 = DIRECTION('',(-1.,0.,2.168404344971E-16));-#1843 = DIRECTION('',(-2.168404344971E-16,0.,-1.));-#1844 = DEFINITIONAL_REPRESENTATION('',(#1845),#1849);-#1845 = LINE('',#1846,#1847);-#1846 = CARTESIAN_POINT('',(3.14159265359,0.));-#1847 = VECTOR('',#1848,1.);-#1848 = DIRECTION('',(0.,1.));-#1849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1850 = ORIENTED_EDGE('',*,*,#1851,.F.);-#1851 = EDGE_CURVE('',#1852,#1817,#1854,.T.);-#1852 = VERTEX_POINT('',#1853);-#1853 = CARTESIAN_POINT('',(0.95,0.9,0.625));-#1854 = SURFACE_CURVE('',#1855,(#1859,#1866),.PCURVE_S1.);-#1855 = LINE('',#1856,#1857);-#1856 = CARTESIAN_POINT('',(0.95,0.95,0.625));-#1857 = VECTOR('',#1858,1.);-#1858 = DIRECTION('',(0.,-1.,0.));-#1859 = PCURVE('',#1827,#1860);-#1860 = DEFINITIONAL_REPRESENTATION('',(#1861),#1865);-#1861 = LINE('',#1862,#1863);-#1862 = CARTESIAN_POINT('',(-5.E-02,-0.));-#1863 = VECTOR('',#1864,1.);-#1864 = DIRECTION('',(0.,1.));-#1865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1866 = PCURVE('',#1747,#1867);-#1867 = DEFINITIONAL_REPRESENTATION('',(#1868),#1872);-#1868 = LINE('',#1869,#1870);-#1869 = CARTESIAN_POINT('',(3.14159265359,0.));-#1870 = VECTOR('',#1871,1.);-#1871 = DIRECTION('',(0.,1.));-#1872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1873 = ORIENTED_EDGE('',*,*,#1874,.F.);-#1874 = EDGE_CURVE('',#1875,#1852,#1877,.T.);-#1875 = VERTEX_POINT('',#1876);-#1876 = CARTESIAN_POINT('',(0.525,0.9,0.625));-#1877 = SURFACE_CURVE('',#1878,(#1882,#1889),.PCURVE_S1.);-#1878 = LINE('',#1879,#1880);-#1879 = CARTESIAN_POINT('',(1.,0.9,0.625));-#1880 = VECTOR('',#1881,1.);-#1881 = DIRECTION('',(1.,-0.,-2.168404344971E-16));-#1882 = PCURVE('',#1827,#1883);-#1883 = DEFINITIONAL_REPRESENTATION('',(#1884),#1888);-#1884 = LINE('',#1885,#1886);-#1885 = CARTESIAN_POINT('',(0.,5.E-02));-#1886 = VECTOR('',#1887,1.);-#1887 = DIRECTION('',(1.,0.));-#1888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1889 = PCURVE('',#1890,#1895);-#1890 = CYLINDRICAL_SURFACE('',#1891,5.E-02);-#1891 = AXIS2_PLACEMENT_3D('',#1892,#1893,#1894);-#1892 = CARTESIAN_POINT('',(1.246832498358E-16,0.9,0.575));-#1893 = DIRECTION('',(1.,0.,-2.168404344971E-16));-#1894 = DIRECTION('',(2.168404344971E-16,0.,1.));-#1895 = DEFINITIONAL_REPRESENTATION('',(#1896),#1900);-#1896 = LINE('',#1897,#1898);-#1897 = CARTESIAN_POINT('',(6.28318530718,1.));-#1898 = VECTOR('',#1899,1.);-#1899 = DIRECTION('',(0.,1.));-#1900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1901 = ORIENTED_EDGE('',*,*,#1902,.F.);-#1902 = EDGE_CURVE('',#1819,#1875,#1903,.T.);-#1903 = SURFACE_CURVE('',#1904,(#1908,#1915),.PCURVE_S1.);-#1904 = LINE('',#1905,#1906);-#1905 = CARTESIAN_POINT('',(0.525,0.95,0.625));-#1906 = VECTOR('',#1907,1.);-#1907 = DIRECTION('',(-0.,1.,-0.));-#1908 = PCURVE('',#1827,#1909);-#1909 = DEFINITIONAL_REPRESENTATION('',(#1910),#1914);-#1910 = LINE('',#1911,#1912);-#1911 = CARTESIAN_POINT('',(-0.475,-0.));-#1912 = VECTOR('',#1913,1.);-#1913 = DIRECTION('',(0.,-1.));-#1914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1915 = PCURVE('',#1916,#1921);-#1916 = CYLINDRICAL_SURFACE('',#1917,2.5E-02);-#1917 = AXIS2_PLACEMENT_3D('',#1918,#1919,#1920);-#1918 = CARTESIAN_POINT('',(0.525,0.95,0.6));-#1919 = DIRECTION('',(0.,-1.,0.));-#1920 = DIRECTION('',(0.,0.,-1.));-#1921 = DEFINITIONAL_REPRESENTATION('',(#1922),#1926);-#1922 = LINE('',#1923,#1924);-#1923 = CARTESIAN_POINT('',(3.14159265359,0.));-#1924 = VECTOR('',#1925,1.);-#1925 = DIRECTION('',(0.,-1.));-#1926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1927 = ADVANCED_FACE('',(#1928),#1943,.F.);-#1928 = FACE_BOUND('',#1929,.T.);-#1929 = EDGE_LOOP('',(#1930,#1966,#1994,#2023,#2051,#2080,#2103,#2132));-#1930 = ORIENTED_EDGE('',*,*,#1931,.F.);-#1931 = EDGE_CURVE('',#1932,#1934,#1936,.T.);-#1932 = VERTEX_POINT('',#1933);-#1933 = CARTESIAN_POINT('',(0.5,0.9,-0.6));-#1934 = VERTEX_POINT('',#1935);-#1935 = CARTESIAN_POINT('',(0.5,0.925,-0.575));-#1936 = SURFACE_CURVE('',#1937,(#1942,#1954),.PCURVE_S1.);-#1937 = CIRCLE('',#1938,2.5E-02);-#1938 = AXIS2_PLACEMENT_3D('',#1939,#1940,#1941);-#1939 = CARTESIAN_POINT('',(0.5,0.9,-0.575));-#1940 = DIRECTION('',(1.,0.,1.734723475977E-16));-#1941 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#1942 = PCURVE('',#1943,#1948);-#1943 = PLANE('',#1944);-#1944 = AXIS2_PLACEMENT_3D('',#1945,#1946,#1947);-#1945 = CARTESIAN_POINT('',(0.5,0.95,-0.625));-#1946 = DIRECTION('',(1.,0.,1.734723475977E-16));-#1947 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#1948 = DEFINITIONAL_REPRESENTATION('',(#1949),#1953);-#1949 = CIRCLE('',#1950,2.5E-02);-#1950 = AXIS2_PLACEMENT_2D('',#1951,#1952);-#1951 = CARTESIAN_POINT('',(5.E-02,5.E-02));-#1952 = DIRECTION('',(1.,0.));-#1953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1954 = PCURVE('',#1955,#1960);-#1955 = TOROIDAL_SURFACE('',#1956,2.5E-02,2.5E-02);-#1956 = AXIS2_PLACEMENT_3D('',#1957,#1958,#1959);-#1957 = CARTESIAN_POINT('',(0.525,0.9,-0.575));-#1958 = DIRECTION('',(1.,0.,1.734723475977E-16));-#1959 = DIRECTION('',(-1.734723475977E-16,0.,1.));+#1696 = EDGE_CURVE('',#1615,#1669,#1697,.T.);+#1697 = SURFACE_CURVE('',#1698,(#1701,#1707),.PCURVE_S1.);+#1698 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1699,#1700),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1699 = CARTESIAN_POINT('',(0.525,6.578945E-02,0.625));+#1700 = CARTESIAN_POINT('',(0.525,1.1842101,0.625));+#1701 = PCURVE('',#1622,#1702);+#1702 = DEFINITIONAL_REPRESENTATION('',(#1703),#1706);+#1703 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1704,#1705),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1704 = CARTESIAN_POINT('',(-0.475,0.9));+#1705 = CARTESIAN_POINT('',(-0.475,5.E-02));+#1706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1707 = PCURVE('',#1708,#1715);+#1708 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#1709,#1710)+ ,(#1711,#1712)+ ,(#1713,#1714+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 3.14159265359,4.712388980385),(5.E-02,0.9),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1709 = CARTESIAN_POINT('',(0.525,1.1842101,0.625));+#1710 = CARTESIAN_POINT('',(0.525,6.578945E-02,0.625));+#1711 = CARTESIAN_POINT('',(0.5,1.1842101,0.625));+#1712 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.625));+#1713 = CARTESIAN_POINT('',(0.5,1.1842101,0.6));+#1714 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.6));+#1715 = DEFINITIONAL_REPRESENTATION('',(#1716),#1720);+#1716 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1717,#1718,#1719),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1717 = CARTESIAN_POINT('',(3.14159265359,0.9));+#1718 = CARTESIAN_POINT('',(3.14159265359,0.475));+#1719 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#1720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1721 = ADVANCED_FACE('',(#1722),#1736,.F.);+#1722 = FACE_BOUND('',#1723,.T.);+#1723 = EDGE_LOOP('',(#1724,#1764,#1792,#1825,#1853,#1886,#1907,#1940));+#1724 = ORIENTED_EDGE('',*,*,#1725,.F.);+#1725 = EDGE_CURVE('',#1726,#1728,#1730,.T.);+#1726 = VERTEX_POINT('',#1727);+#1727 = CARTESIAN_POINT('',(0.5,1.1842101,-0.6));+#1728 = VERTEX_POINT('',#1729);+#1729 = CARTESIAN_POINT('',(0.5,1.217104825,-0.575));+#1730 = SURFACE_CURVE('',#1731,(#1735,#1747),.PCURVE_S1.);+#1731 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1732,#1733,#1734),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1732 = CARTESIAN_POINT('',(0.5,1.1842101,-0.6));+#1733 = CARTESIAN_POINT('',(0.5,1.217104825,-0.6));+#1734 = CARTESIAN_POINT('',(0.5,1.217104825,-0.575));+#1735 = PCURVE('',#1736,#1741);+#1736 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1737,#1738)+ ,(#1739,#1740+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(2.5E-02,1.225),(2.5E-02,+ 0.925),.PIECEWISE_BEZIER_KNOTS.);+#1737 = CARTESIAN_POINT('',(0.5,1.217104825,-0.6));+#1738 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.6));+#1739 = CARTESIAN_POINT('',(0.5,1.217104825,0.6));+#1740 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.6));+#1741 = DEFINITIONAL_REPRESENTATION('',(#1742),#1746);+#1742 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1743,#1744,#1745),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1743 = CARTESIAN_POINT('',(2.5E-02,5.E-02));+#1744 = CARTESIAN_POINT('',(2.5E-02,2.5E-02));+#1745 = CARTESIAN_POINT('',(5.E-02,2.5E-02));+#1746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1747 = PCURVE('',#1748,#1758);+#1748 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#1749,#1750,#1751)+ ,(#1752,#1753,#1754)+ ,(#1755,#1756,#1757+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 3.14159265359,4.712388980385),(4.712388980385,6.28318530718),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1749 = CARTESIAN_POINT('',(0.5,1.1842101,-0.6));+#1750 = CARTESIAN_POINT('',(0.5,1.1842101,-0.625));+#1751 = CARTESIAN_POINT('',(0.525,1.1842101,-0.625));+#1752 = CARTESIAN_POINT('',(0.5,1.217104825,-0.6));+#1753 = CARTESIAN_POINT('',(0.5,1.24999955,-0.625));+#1754 = CARTESIAN_POINT('',(0.525,1.24999955,-0.625));+#1755 = CARTESIAN_POINT('',(0.5,1.217104825,-0.575));+#1756 = CARTESIAN_POINT('',(0.5,1.24999955,-0.575));+#1757 = CARTESIAN_POINT('',(0.525,1.24999955,-0.575));+#1758 = DEFINITIONAL_REPRESENTATION('',(#1759),#1763);+#1759 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1760,#1761,#1762),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#1760 = CARTESIAN_POINT('',(3.14159265359,4.712388980385));+#1761 = CARTESIAN_POINT('',(3.926990816987,4.712388980385));+#1762 = CARTESIAN_POINT('',(4.712388980385,4.712388980385));+#1763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1764 = ORIENTED_EDGE('',*,*,#1765,.F.);+#1765 = EDGE_CURVE('',#1766,#1726,#1768,.T.);+#1766 = VERTEX_POINT('',#1767);+#1767 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.6));+#1768 = SURFACE_CURVE('',#1769,(#1772,#1778),.PCURVE_S1.);+#1769 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1770,#1771),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1770 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.6));+#1771 = CARTESIAN_POINT('',(0.5,1.1842101,-0.6));+#1772 = PCURVE('',#1736,#1773);+#1773 = DEFINITIONAL_REPRESENTATION('',(#1774),#1777);+#1774 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1775,#1776),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1775 = CARTESIAN_POINT('',(2.5E-02,0.9));+#1776 = CARTESIAN_POINT('',(2.5E-02,5.E-02));+#1777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1778 = PCURVE('',#1779,#1786);+#1779 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#1780,#1781)+ ,(#1782,#1783)+ ,(#1784,#1785+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 4.712388980385,6.28318530718),(5.E-02,0.9),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1780 = CARTESIAN_POINT('',(0.5,1.1842101,-0.6));+#1781 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.6));+#1782 = CARTESIAN_POINT('',(0.5,1.1842101,-0.625));+#1783 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.625));+#1784 = CARTESIAN_POINT('',(0.525,1.1842101,-0.625));+#1785 = CARTESIAN_POINT('',(0.525,6.578945E-02,-0.625));+#1786 = DEFINITIONAL_REPRESENTATION('',(#1787),#1791);+#1787 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1788,#1789,#1790),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1788 = CARTESIAN_POINT('',(4.712388980385,0.9));+#1789 = CARTESIAN_POINT('',(4.712388980385,0.475));+#1790 = CARTESIAN_POINT('',(4.712388980385,5.E-02));+#1791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1792 = ORIENTED_EDGE('',*,*,#1793,.F.);+#1793 = EDGE_CURVE('',#1794,#1766,#1796,.T.);+#1794 = VERTEX_POINT('',#1795);+#1795 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.575));+#1796 = SURFACE_CURVE('',#1797,(#1801,#1808),.PCURVE_S1.);+#1797 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1798,#1799,#1800),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1798 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.575));+#1799 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.6));+#1800 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.6));+#1801 = PCURVE('',#1736,#1802);+#1802 = DEFINITIONAL_REPRESENTATION('',(#1803),#1807);+#1803 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1804,#1805,#1806),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1804 = CARTESIAN_POINT('',(5.E-02,0.925));+#1805 = CARTESIAN_POINT('',(2.5E-02,0.925));+#1806 = CARTESIAN_POINT('',(2.5E-02,0.9));+#1807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1808 = PCURVE('',#1809,#1819);+#1809 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#1810,#1811,#1812)+ ,(#1813,#1814,#1815)+ ,(#1816,#1817,#1818+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 1.570796326795,3.14159265359),(4.712388980385,6.28318530718),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1810 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.575));+#1811 = CARTESIAN_POINT('',(0.5,3.652048108371E-17,-0.575));+#1812 = CARTESIAN_POINT('',(0.525,2.739036081278E-17,-0.575));+#1813 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.6));+#1814 = CARTESIAN_POINT('',(0.5,3.652048108371E-17,-0.625));+#1815 = CARTESIAN_POINT('',(0.525,2.739036081278E-17,-0.625));+#1816 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.6));+#1817 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.625));+#1818 = CARTESIAN_POINT('',(0.525,6.578945E-02,-0.625));+#1819 = DEFINITIONAL_REPRESENTATION('',(#1820),#1824);+#1820 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1821,#1822,#1823),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#1821 = CARTESIAN_POINT('',(1.570796326795,4.712388980385));+#1822 = CARTESIAN_POINT('',(2.356194490192,4.712388980385));+#1823 = CARTESIAN_POINT('',(3.14159265359,4.712388980385));+#1824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1825 = ORIENTED_EDGE('',*,*,#1826,.F.);+#1826 = EDGE_CURVE('',#1827,#1794,#1829,.T.);+#1827 = VERTEX_POINT('',#1828);+#1828 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.575));+#1829 = SURFACE_CURVE('',#1830,(#1833,#1839),.PCURVE_S1.);+#1830 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1831,#1832),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1831 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.575));+#1832 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.575));+#1833 = PCURVE('',#1736,#1834);+#1834 = DEFINITIONAL_REPRESENTATION('',(#1835),#1838);+#1835 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1836,#1837),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1836 = CARTESIAN_POINT('',(1.2,0.925));+#1837 = CARTESIAN_POINT('',(5.E-02,0.925));+#1838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1839 = PCURVE('',#1840,#1847);+#1840 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#1841,#1842)+ ,(#1843,#1844)+ ,(#1845,#1846+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 1.570796326795,3.14159265359),(-1.2,-5.E-02),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1841 = CARTESIAN_POINT('',(0.525,0.,0.575));+#1842 = CARTESIAN_POINT('',(0.525,0.,-0.575));+#1843 = CARTESIAN_POINT('',(0.5,-1.460819243349E-16,0.575));+#1844 = CARTESIAN_POINT('',(0.5,-1.460819243349E-16,-0.575));+#1845 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.575));+#1846 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.575));+#1847 = DEFINITIONAL_REPRESENTATION('',(#1848),#1852);+#1848 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1849,#1850,#1851),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#1849 = CARTESIAN_POINT('',(3.14159265359,-1.2));+#1850 = CARTESIAN_POINT('',(3.14159265359,-0.625));+#1851 = CARTESIAN_POINT('',(3.14159265359,-5.E-02));+#1852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1853 = ORIENTED_EDGE('',*,*,#1854,.F.);+#1854 = EDGE_CURVE('',#1855,#1827,#1857,.T.);+#1855 = VERTEX_POINT('',#1856);+#1856 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.6));+#1857 = SURFACE_CURVE('',#1858,(#1862,#1869),.PCURVE_S1.);+#1858 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1859,#1860,#1861),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1859 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.6));+#1860 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.6));+#1861 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.575));+#1862 = PCURVE('',#1736,#1863);+#1863 = DEFINITIONAL_REPRESENTATION('',(#1864),#1868);+#1864 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1865,#1866,#1867),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1865 = CARTESIAN_POINT('',(1.225,0.9));+#1866 = CARTESIAN_POINT('',(1.225,0.925));+#1867 = CARTESIAN_POINT('',(1.2,0.925));+#1868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1869 = PCURVE('',#1870,#1880);+#1870 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#1871,#1872,#1873)+ ,(#1874,#1875,#1876)+ ,(#1877,#1878,#1879+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 0.,1.570796326795),(4.712388980385,6.28318530718),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1871 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.6));+#1872 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.625));+#1873 = CARTESIAN_POINT('',(0.525,6.578945E-02,0.625));+#1874 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.6));+#1875 = CARTESIAN_POINT('',(0.5,3.652048108371E-17,0.625));+#1876 = CARTESIAN_POINT('',(0.525,3.652048108371E-17,0.625));+#1877 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.575));+#1878 = CARTESIAN_POINT('',(0.5,2.739036081278E-17,0.575));+#1879 = CARTESIAN_POINT('',(0.525,2.739036081278E-17,0.575));+#1880 = DEFINITIONAL_REPRESENTATION('',(#1881),#1885);+#1881 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1882,#1883,#1884),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#1882 = CARTESIAN_POINT('',(0.,4.712388980385));+#1883 = CARTESIAN_POINT('',(0.785398163397,4.712388980385));+#1884 = CARTESIAN_POINT('',(1.570796326795,4.712388980385));+#1885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1886 = ORIENTED_EDGE('',*,*,#1887,.F.);+#1887 = EDGE_CURVE('',#1888,#1855,#1890,.T.);+#1888 = VERTEX_POINT('',#1889);+#1889 = CARTESIAN_POINT('',(0.5,1.1842101,0.6));+#1890 = SURFACE_CURVE('',#1891,(#1894,#1900),.PCURVE_S1.);+#1891 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1892,#1893),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#1892 = CARTESIAN_POINT('',(0.5,1.1842101,0.6));+#1893 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.6));+#1894 = PCURVE('',#1736,#1895);+#1895 = DEFINITIONAL_REPRESENTATION('',(#1896),#1899);+#1896 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1897,#1898),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#1897 = CARTESIAN_POINT('',(1.225,5.E-02));+#1898 = CARTESIAN_POINT('',(1.225,0.9));+#1899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1900 = PCURVE('',#1708,#1901);+#1901 = DEFINITIONAL_REPRESENTATION('',(#1902),#1906);+#1902 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1903,#1904,#1905),+ .UNSPECIFIED.,.F.,.F.,(3,3),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#1903 = CARTESIAN_POINT('',(4.712388980385,5.E-02));+#1904 = CARTESIAN_POINT('',(4.712388980385,0.475));+#1905 = CARTESIAN_POINT('',(4.712388980385,0.9));+#1906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1907 = ORIENTED_EDGE('',*,*,#1908,.F.);+#1908 = EDGE_CURVE('',#1909,#1888,#1911,.T.);+#1909 = VERTEX_POINT('',#1910);+#1910 = CARTESIAN_POINT('',(0.5,1.217104825,0.575));+#1911 = SURFACE_CURVE('',#1912,(#1916,#1923),.PCURVE_S1.);+#1912 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1913,#1914,#1915),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1913 = CARTESIAN_POINT('',(0.5,1.217104825,0.575));+#1914 = CARTESIAN_POINT('',(0.5,1.217104825,0.6));+#1915 = CARTESIAN_POINT('',(0.5,1.1842101,0.6));+#1916 = PCURVE('',#1736,#1917);+#1917 = DEFINITIONAL_REPRESENTATION('',(#1918),#1922);+#1918 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1919,#1920,#1921),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#1919 = CARTESIAN_POINT('',(1.2,2.5E-02));+#1920 = CARTESIAN_POINT('',(1.225,2.5E-02));+#1921 = CARTESIAN_POINT('',(1.225,5.E-02));+#1922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1923 = PCURVE('',#1924,#1934);+#1924 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#1925,#1926,#1927)+ ,(#1928,#1929,#1930)+ ,(#1931,#1932,#1933+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 4.712388980385,6.28318530718),(4.712388980385,6.28318530718),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1925 = CARTESIAN_POINT('',(0.5,1.217104825,0.575));+#1926 = CARTESIAN_POINT('',(0.5,1.24999955,0.575));+#1927 = CARTESIAN_POINT('',(0.525,1.24999955,0.575));+#1928 = CARTESIAN_POINT('',(0.5,1.217104825,0.6));+#1929 = CARTESIAN_POINT('',(0.5,1.24999955,0.625));+#1930 = CARTESIAN_POINT('',(0.525,1.24999955,0.625));+#1931 = CARTESIAN_POINT('',(0.5,1.1842101,0.6));+#1932 = CARTESIAN_POINT('',(0.5,1.1842101,0.625));+#1933 = CARTESIAN_POINT('',(0.525,1.1842101,0.625));+#1934 = DEFINITIONAL_REPRESENTATION('',(#1935),#1939);+#1935 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1936,#1937,#1938),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#1936 = CARTESIAN_POINT('',(4.712388980385,4.712388980385));+#1937 = CARTESIAN_POINT('',(5.497787143782,4.712388980385));+#1938 = CARTESIAN_POINT('',(6.28318530718,4.712388980385));+#1939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1940 = ORIENTED_EDGE('',*,*,#1941,.F.);+#1941 = EDGE_CURVE('',#1728,#1909,#1942,.T.);+#1942 = SURFACE_CURVE('',#1943,(#1946,#1952),.PCURVE_S1.);+#1943 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1944,#1945),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#1944 = CARTESIAN_POINT('',(0.5,1.217104825,-0.575));+#1945 = CARTESIAN_POINT('',(0.5,1.217104825,0.575));+#1946 = PCURVE('',#1736,#1947);+#1947 = DEFINITIONAL_REPRESENTATION('',(#1948),#1951);+#1948 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1949,#1950),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#1949 = CARTESIAN_POINT('',(5.E-02,2.5E-02));+#1950 = CARTESIAN_POINT('',(1.2,2.5E-02));+#1951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1952 = PCURVE('',#1953,#1960);+#1953 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#1954,#1955)+ ,(#1956,#1957)+ ,(#1958,#1959+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 4.712388980385,6.28318530718),(-0.575,0.575),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1954 = CARTESIAN_POINT('',(0.525,1.24999955,-0.575));+#1955 = CARTESIAN_POINT('',(0.525,1.24999955,0.575));+#1956 = CARTESIAN_POINT('',(0.5,1.24999955,-0.575));+#1957 = CARTESIAN_POINT('',(0.5,1.24999955,0.575));+#1958 = CARTESIAN_POINT('',(0.5,1.217104825,-0.575));+#1959 = CARTESIAN_POINT('',(0.5,1.217104825,0.575)); #1960 = DEFINITIONAL_REPRESENTATION('',(#1961),#1965);-#1961 = LINE('',#1962,#1963);-#1962 = CARTESIAN_POINT('',(0.,4.712388980385));-#1963 = VECTOR('',#1964,1.);-#1964 = DIRECTION('',(1.,0.));+#1961 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#1962,#1963,#1964),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#1962 = CARTESIAN_POINT('',(6.28318530718,-0.575));+#1963 = CARTESIAN_POINT('',(6.28318530718,1.224510688925E-16));+#1964 = CARTESIAN_POINT('',(6.28318530718,0.575)); #1965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1966 = ORIENTED_EDGE('',*,*,#1967,.F.);-#1967 = EDGE_CURVE('',#1968,#1932,#1970,.T.);-#1968 = VERTEX_POINT('',#1969);-#1969 = CARTESIAN_POINT('',(0.5,5.E-02,-0.6));-#1970 = SURFACE_CURVE('',#1971,(#1975,#1982),.PCURVE_S1.);-#1971 = LINE('',#1972,#1973);-#1972 = CARTESIAN_POINT('',(0.5,0.95,-0.6));-#1973 = VECTOR('',#1974,1.);-#1974 = DIRECTION('',(-0.,1.,-0.));-#1975 = PCURVE('',#1943,#1976);-#1976 = DEFINITIONAL_REPRESENTATION('',(#1977),#1981);-#1977 = LINE('',#1978,#1979);-#1978 = CARTESIAN_POINT('',(2.5E-02,0.));-#1979 = VECTOR('',#1980,1.);-#1980 = DIRECTION('',(0.,-1.));-#1981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1982 = PCURVE('',#1983,#1988);-#1983 = CYLINDRICAL_SURFACE('',#1984,2.5E-02);-#1984 = AXIS2_PLACEMENT_3D('',#1985,#1986,#1987);-#1985 = CARTESIAN_POINT('',(0.525,0.95,-0.6));-#1986 = DIRECTION('',(0.,-1.,0.));-#1987 = DIRECTION('',(0.,0.,-1.));-#1988 = DEFINITIONAL_REPRESENTATION('',(#1989),#1993);-#1989 = LINE('',#1990,#1991);-#1990 = CARTESIAN_POINT('',(4.712388980385,0.));-#1991 = VECTOR('',#1992,1.);-#1992 = DIRECTION('',(0.,-1.));-#1993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1994 = ORIENTED_EDGE('',*,*,#1995,.F.);-#1995 = EDGE_CURVE('',#1996,#1968,#1998,.T.);-#1996 = VERTEX_POINT('',#1997);-#1997 = CARTESIAN_POINT('',(0.5,2.5E-02,-0.575));-#1998 = SURFACE_CURVE('',#1999,(#2004,#2011),.PCURVE_S1.);-#1999 = CIRCLE('',#2000,2.5E-02);-#2000 = AXIS2_PLACEMENT_3D('',#2001,#2002,#2003);-#2001 = CARTESIAN_POINT('',(0.5,5.E-02,-0.575));-#2002 = DIRECTION('',(1.,0.,1.734723475977E-16));-#2003 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#2004 = PCURVE('',#1943,#2005);-#2005 = DEFINITIONAL_REPRESENTATION('',(#2006),#2010);-#2006 = CIRCLE('',#2007,2.5E-02);-#2007 = AXIS2_PLACEMENT_2D('',#2008,#2009);-#2008 = CARTESIAN_POINT('',(5.E-02,0.9));-#2009 = DIRECTION('',(1.,0.));-#2010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2011 = PCURVE('',#2012,#2017);-#2012 = TOROIDAL_SURFACE('',#2013,2.5E-02,2.5E-02);-#2013 = AXIS2_PLACEMENT_3D('',#2014,#2015,#2016);-#2014 = CARTESIAN_POINT('',(0.525,5.E-02,-0.575));-#2015 = DIRECTION('',(1.,0.,1.734723475977E-16));-#2016 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#2017 = DEFINITIONAL_REPRESENTATION('',(#2018),#2022);-#2018 = LINE('',#2019,#2020);-#2019 = CARTESIAN_POINT('',(0.,4.712388980385));-#2020 = VECTOR('',#2021,1.);-#2021 = DIRECTION('',(1.,-1.130863886743E-15));-#2022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2023 = ORIENTED_EDGE('',*,*,#2024,.F.);-#2024 = EDGE_CURVE('',#2025,#1996,#2027,.T.);-#2025 = VERTEX_POINT('',#2026);-#2026 = CARTESIAN_POINT('',(0.5,2.5E-02,0.575));-#2027 = SURFACE_CURVE('',#2028,(#2032,#2039),.PCURVE_S1.);-#2028 = LINE('',#2029,#2030);-#2029 = CARTESIAN_POINT('',(0.5,2.5E-02,-0.625));-#2030 = VECTOR('',#2031,1.);-#2031 = DIRECTION('',(1.734723475977E-16,0.,-1.));-#2032 = PCURVE('',#1943,#2033);-#2033 = DEFINITIONAL_REPRESENTATION('',(#2034),#2038);-#2034 = LINE('',#2035,#2036);-#2035 = CARTESIAN_POINT('',(0.,0.925));-#2036 = VECTOR('',#2037,1.);-#2037 = DIRECTION('',(-1.,0.));+#1966 = ADVANCED_FACE('',(#1967),#1980,.F.);+#1967 = FACE_BOUND('',#1968,.T.);+#1968 = EDGE_LOOP('',(#1969,#2004,#2025,#2053));+#1969 = ORIENTED_EDGE('',*,*,#1970,.F.);+#1970 = EDGE_CURVE('',#1971,#1973,#1975,.T.);+#1971 = VERTEX_POINT('',#1972);+#1972 = CARTESIAN_POINT('',(0.95,1.1842101,-0.625));+#1973 = VERTEX_POINT('',#1974);+#1974 = CARTESIAN_POINT('',(0.525,1.1842101,-0.625));+#1975 = SURFACE_CURVE('',#1976,(#1979,#1990),.PCURVE_S1.);+#1976 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1977,#1978),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.45,-2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#1977 = CARTESIAN_POINT('',(0.95,1.1842101,-0.625));+#1978 = CARTESIAN_POINT('',(0.525,1.1842101,-0.625));+#1979 = PCURVE('',#1980,#1985);+#1980 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1981,#1982)+ ,(#1983,#1984+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(5.E-02,0.475),(5.E-02,0.9),+ .PIECEWISE_BEZIER_KNOTS.);+#1981 = CARTESIAN_POINT('',(0.95,1.1842101,-0.625));+#1982 = CARTESIAN_POINT('',(0.95,6.578945E-02,-0.625));+#1983 = CARTESIAN_POINT('',(0.525,1.1842101,-0.625));+#1984 = CARTESIAN_POINT('',(0.525,6.578945E-02,-0.625));+#1985 = DEFINITIONAL_REPRESENTATION('',(#1986),#1989);+#1986 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1987,#1988),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.45,-2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#1987 = CARTESIAN_POINT('',(5.E-02,5.E-02));+#1988 = CARTESIAN_POINT('',(0.475,5.E-02));+#1989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1990 = PCURVE('',#1991,#1998);+#1991 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#1992,#1993)+ ,(#1994,#1995)+ ,(#1996,#1997+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 4.712388980385,6.28318530718),(-0.95,-0.525),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1992 = CARTESIAN_POINT('',(0.95,1.24999955,-0.575));+#1993 = CARTESIAN_POINT('',(0.525,1.24999955,-0.575));+#1994 = CARTESIAN_POINT('',(0.95,1.24999955,-0.625));+#1995 = CARTESIAN_POINT('',(0.525,1.24999955,-0.625));+#1996 = CARTESIAN_POINT('',(0.95,1.1842101,-0.625));+#1997 = CARTESIAN_POINT('',(0.525,1.1842101,-0.625));+#1998 = DEFINITIONAL_REPRESENTATION('',(#1999),#2003);+#1999 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2000,#2001,#2002),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.45,-2.5E-02),+ .PIECEWISE_BEZIER_KNOTS.);+#2000 = CARTESIAN_POINT('',(6.28318530718,-0.95));+#2001 = CARTESIAN_POINT('',(6.28318530718,-0.7375));+#2002 = CARTESIAN_POINT('',(6.28318530718,-0.525));+#2003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2004 = ORIENTED_EDGE('',*,*,#2005,.F.);+#2005 = EDGE_CURVE('',#2006,#1971,#2008,.T.);+#2006 = VERTEX_POINT('',#2007);+#2007 = CARTESIAN_POINT('',(0.95,6.578945E-02,-0.625));+#2008 = SURFACE_CURVE('',#2009,(#2012,#2018),.PCURVE_S1.);+#2009 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2010,#2011),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#2010 = CARTESIAN_POINT('',(0.95,6.578945E-02,-0.625));+#2011 = CARTESIAN_POINT('',(0.95,1.1842101,-0.625));+#2012 = PCURVE('',#1980,#2013);+#2013 = DEFINITIONAL_REPRESENTATION('',(#2014),#2017);+#2014 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2015,#2016),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#2015 = CARTESIAN_POINT('',(5.E-02,0.9));+#2016 = CARTESIAN_POINT('',(5.E-02,5.E-02));+#2017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2018 = PCURVE('',#1595,#2019);+#2019 = DEFINITIONAL_REPRESENTATION('',(#2020),#2024);+#2020 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2021,#2022,#2023),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#2021 = CARTESIAN_POINT('',(0.,0.9));+#2022 = CARTESIAN_POINT('',(0.,0.475));+#2023 = CARTESIAN_POINT('',(0.,5.E-02));+#2024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2025 = ORIENTED_EDGE('',*,*,#2026,.F.);+#2026 = EDGE_CURVE('',#2027,#2006,#2029,.T.);+#2027 = VERTEX_POINT('',#2028);+#2028 = CARTESIAN_POINT('',(0.525,6.578945E-02,-0.625));+#2029 = SURFACE_CURVE('',#2030,(#2033,#2039),.PCURVE_S1.);+#2030 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2031,#2032),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#2031 = CARTESIAN_POINT('',(0.525,6.578945E-02,-0.625));+#2032 = CARTESIAN_POINT('',(0.95,6.578945E-02,-0.625));+#2033 = PCURVE('',#1980,#2034);+#2034 = DEFINITIONAL_REPRESENTATION('',(#2035),#2038);+#2035 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2036,#2037),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#2036 = CARTESIAN_POINT('',(0.475,0.9));+#2037 = CARTESIAN_POINT('',(5.E-02,0.9)); #2038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2039 = PCURVE('',#2040,#2045);-#2040 = CYLINDRICAL_SURFACE('',#2041,2.5E-02);-#2041 = AXIS2_PLACEMENT_3D('',#2042,#2043,#2044);-#2042 = CARTESIAN_POINT('',(0.525,2.5E-02,-0.625));-#2043 = DIRECTION('',(1.734723475977E-16,0.,-1.));-#2044 = DIRECTION('',(1.,0.,1.734723475977E-16));-#2045 = DEFINITIONAL_REPRESENTATION('',(#2046),#2050);-#2046 = LINE('',#2047,#2048);-#2047 = CARTESIAN_POINT('',(3.14159265359,0.));-#2048 = VECTOR('',#2049,1.);-#2049 = DIRECTION('',(0.,1.));-#2050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2051 = ORIENTED_EDGE('',*,*,#2052,.F.);-#2052 = EDGE_CURVE('',#2053,#2025,#2055,.T.);-#2053 = VERTEX_POINT('',#2054);-#2054 = CARTESIAN_POINT('',(0.5,5.E-02,0.6));-#2055 = SURFACE_CURVE('',#2056,(#2061,#2068),.PCURVE_S1.);-#2056 = CIRCLE('',#2057,2.5E-02);-#2057 = AXIS2_PLACEMENT_3D('',#2058,#2059,#2060);-#2058 = CARTESIAN_POINT('',(0.5,5.E-02,0.575));-#2059 = DIRECTION('',(1.,0.,1.734723475977E-16));-#2060 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#2061 = PCURVE('',#1943,#2062);-#2062 = DEFINITIONAL_REPRESENTATION('',(#2063),#2067);-#2063 = CIRCLE('',#2064,2.5E-02);-#2064 = AXIS2_PLACEMENT_2D('',#2065,#2066);-#2065 = CARTESIAN_POINT('',(1.2,0.9));-#2066 = DIRECTION('',(1.,0.));-#2067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2068 = PCURVE('',#2069,#2074);-#2069 = TOROIDAL_SURFACE('',#2070,2.5E-02,2.5E-02);-#2070 = AXIS2_PLACEMENT_3D('',#2071,#2072,#2073);-#2071 = CARTESIAN_POINT('',(0.525,5.E-02,0.575));-#2072 = DIRECTION('',(1.,0.,1.734723475977E-16));-#2073 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#2074 = DEFINITIONAL_REPRESENTATION('',(#2075),#2079);-#2075 = LINE('',#2076,#2077);-#2076 = CARTESIAN_POINT('',(0.,4.712388980385));-#2077 = VECTOR('',#2078,1.);-#2078 = DIRECTION('',(1.,1.130863886743E-15));-#2079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2080 = ORIENTED_EDGE('',*,*,#2081,.F.);-#2081 = EDGE_CURVE('',#2082,#2053,#2084,.T.);-#2082 = VERTEX_POINT('',#2083);-#2083 = CARTESIAN_POINT('',(0.5,0.9,0.6));-#2084 = SURFACE_CURVE('',#2085,(#2089,#2096),.PCURVE_S1.);-#2085 = LINE('',#2086,#2087);-#2086 = CARTESIAN_POINT('',(0.5,0.95,0.6));-#2087 = VECTOR('',#2088,1.);-#2088 = DIRECTION('',(0.,-1.,0.));-#2089 = PCURVE('',#1943,#2090);-#2090 = DEFINITIONAL_REPRESENTATION('',(#2091),#2095);-#2091 = LINE('',#2092,#2093);-#2092 = CARTESIAN_POINT('',(1.225,0.));-#2093 = VECTOR('',#2094,1.);-#2094 = DIRECTION('',(0.,1.));+#2039 = PCURVE('',#2040,#2047);+#2040 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#2041,#2042)+ ,(#2043,#2044)+ ,(#2045,#2046+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 1.570796326795,3.14159265359),(-0.475,-5.E-02),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2041 = CARTESIAN_POINT('',(0.525,0.,-0.575));+#2042 = CARTESIAN_POINT('',(0.95,0.,-0.575));+#2043 = CARTESIAN_POINT('',(0.525,0.,-0.625));+#2044 = CARTESIAN_POINT('',(0.95,0.,-0.625));+#2045 = CARTESIAN_POINT('',(0.525,6.578945E-02,-0.625));+#2046 = CARTESIAN_POINT('',(0.95,6.578945E-02,-0.625));+#2047 = DEFINITIONAL_REPRESENTATION('',(#2048),#2052);+#2048 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2049,#2050,#2051),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.475,-5.E-02),+ .PIECEWISE_BEZIER_KNOTS.);+#2049 = CARTESIAN_POINT('',(3.14159265359,-0.475));+#2050 = CARTESIAN_POINT('',(3.14159265359,-0.2625));+#2051 = CARTESIAN_POINT('',(3.14159265359,-5.E-02));+#2052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2053 = ORIENTED_EDGE('',*,*,#2054,.F.);+#2054 = EDGE_CURVE('',#1973,#2027,#2055,.T.);+#2055 = SURFACE_CURVE('',#2056,(#2059,#2065),.PCURVE_S1.);+#2056 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2057,#2058),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#2057 = CARTESIAN_POINT('',(0.525,1.1842101,-0.625));+#2058 = CARTESIAN_POINT('',(0.525,6.578945E-02,-0.625));+#2059 = PCURVE('',#1980,#2060);+#2060 = DEFINITIONAL_REPRESENTATION('',(#2061),#2064);+#2061 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2062,#2063),.UNSPECIFIED.,.F.,+ .F.,(2,2),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#2062 = CARTESIAN_POINT('',(0.475,5.E-02));+#2063 = CARTESIAN_POINT('',(0.475,0.9));+#2064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2065 = PCURVE('',#1779,#2066);+#2066 = DEFINITIONAL_REPRESENTATION('',(#2067),#2071);+#2067 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2068,#2069,#2070),+ .UNSPECIFIED.,.F.,.F.,(3,3),(5.E-02,0.9),.PIECEWISE_BEZIER_KNOTS.);+#2068 = CARTESIAN_POINT('',(6.28318530718,5.E-02));+#2069 = CARTESIAN_POINT('',(6.28318530718,0.475));+#2070 = CARTESIAN_POINT('',(6.28318530718,0.9));+#2071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2072 = ADVANCED_FACE('',(#2073),#2086,.T.);+#2073 = FACE_BOUND('',#2074,.T.);+#2074 = EDGE_LOOP('',(#2075,#2103,#2124,#2145));+#2075 = ORIENTED_EDGE('',*,*,#2076,.F.);+#2076 = EDGE_CURVE('',#2077,#2079,#2081,.T.);+#2077 = VERTEX_POINT('',#2078);+#2078 = CARTESIAN_POINT('',(0.95,1.24999955,0.575));+#2079 = VERTEX_POINT('',#2080);+#2080 = CARTESIAN_POINT('',(0.525,1.24999955,0.575));+#2081 = SURFACE_CURVE('',#2082,(#2085,#2096),.PCURVE_S1.);+#2082 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2083,#2084),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.45,-2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#2083 = CARTESIAN_POINT('',(0.95,1.24999955,0.575));+#2084 = CARTESIAN_POINT('',(0.525,1.24999955,0.575));+#2085 = PCURVE('',#2086,#2091);+#2086 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2087,#2088)+ ,(#2089,#2090+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-0.575,0.575),(0.525,0.95),+ .PIECEWISE_BEZIER_KNOTS.);+#2087 = CARTESIAN_POINT('',(0.525,1.24999955,-0.575));+#2088 = CARTESIAN_POINT('',(0.95,1.24999955,-0.575));+#2089 = CARTESIAN_POINT('',(0.525,1.24999955,0.575));+#2090 = CARTESIAN_POINT('',(0.95,1.24999955,0.575));+#2091 = DEFINITIONAL_REPRESENTATION('',(#2092),#2095);+#2092 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2093,#2094),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.45,-2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#2093 = CARTESIAN_POINT('',(0.575,0.95));+#2094 = CARTESIAN_POINT('',(0.575,0.525)); #2095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2096 = PCURVE('',#1916,#2097);+#2096 = PCURVE('',#1682,#2097); #2097 = DEFINITIONAL_REPRESENTATION('',(#2098),#2102);-#2098 = LINE('',#2099,#2100);-#2099 = CARTESIAN_POINT('',(4.712388980385,0.));-#2100 = VECTOR('',#2101,1.);-#2101 = DIRECTION('',(0.,1.));+#2098 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2099,#2100,#2101),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.45,-2.5E-02),+ .PIECEWISE_BEZIER_KNOTS.);+#2099 = CARTESIAN_POINT('',(4.712388980385,0.95));+#2100 = CARTESIAN_POINT('',(4.712388980385,0.7375));+#2101 = CARTESIAN_POINT('',(4.712388980385,0.525)); #2102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #2103 = ORIENTED_EDGE('',*,*,#2104,.F.);-#2104 = EDGE_CURVE('',#2105,#2082,#2107,.T.);+#2104 = EDGE_CURVE('',#2105,#2077,#2107,.T.); #2105 = VERTEX_POINT('',#2106);-#2106 = CARTESIAN_POINT('',(0.5,0.925,0.575));-#2107 = SURFACE_CURVE('',#2108,(#2113,#2120),.PCURVE_S1.);-#2108 = CIRCLE('',#2109,2.5E-02);-#2109 = AXIS2_PLACEMENT_3D('',#2110,#2111,#2112);-#2110 = CARTESIAN_POINT('',(0.5,0.9,0.575));-#2111 = DIRECTION('',(1.,0.,1.734723475977E-16));-#2112 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#2113 = PCURVE('',#1943,#2114);-#2114 = DEFINITIONAL_REPRESENTATION('',(#2115),#2119);-#2115 = CIRCLE('',#2116,2.5E-02);-#2116 = AXIS2_PLACEMENT_2D('',#2117,#2118);-#2117 = CARTESIAN_POINT('',(1.2,5.E-02));-#2118 = DIRECTION('',(1.,0.));-#2119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2120 = PCURVE('',#2121,#2126);-#2121 = TOROIDAL_SURFACE('',#2122,2.5E-02,2.5E-02);-#2122 = AXIS2_PLACEMENT_3D('',#2123,#2124,#2125);-#2123 = CARTESIAN_POINT('',(0.525,0.9,0.575));-#2124 = DIRECTION('',(1.,0.,1.734723475977E-16));-#2125 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#2126 = DEFINITIONAL_REPRESENTATION('',(#2127),#2131);-#2127 = LINE('',#2128,#2129);-#2128 = CARTESIAN_POINT('',(0.,4.712388980385));-#2129 = VECTOR('',#2130,1.);-#2130 = DIRECTION('',(1.,0.));-#2131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2132 = ORIENTED_EDGE('',*,*,#2133,.F.);-#2133 = EDGE_CURVE('',#1934,#2105,#2134,.T.);-#2134 = SURFACE_CURVE('',#2135,(#2139,#2146),.PCURVE_S1.);-#2135 = LINE('',#2136,#2137);-#2136 = CARTESIAN_POINT('',(0.5,0.925,0.575));-#2137 = VECTOR('',#2138,1.);-#2138 = DIRECTION('',(-1.734723475977E-16,-0.,1.));-#2139 = PCURVE('',#1943,#2140);-#2140 = DEFINITIONAL_REPRESENTATION('',(#2141),#2145);-#2141 = LINE('',#2142,#2143);-#2142 = CARTESIAN_POINT('',(1.2,2.5E-02));-#2143 = VECTOR('',#2144,1.);-#2144 = DIRECTION('',(1.,0.));-#2145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2146 = PCURVE('',#2147,#2152);-#2147 = CYLINDRICAL_SURFACE('',#2148,2.5E-02);-#2148 = AXIS2_PLACEMENT_3D('',#2149,#2150,#2151);-#2149 = CARTESIAN_POINT('',(0.525,0.925,9.107298248878E-17));-#2150 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#2151 = DIRECTION('',(-1.,0.,-1.734723475977E-16));-#2152 = DEFINITIONAL_REPRESENTATION('',(#2153),#2157);-#2153 = LINE('',#2154,#2155);-#2154 = CARTESIAN_POINT('',(6.28318530718,0.575));-#2155 = VECTOR('',#2156,1.);-#2156 = DIRECTION('',(0.,1.));-#2157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2158 = ADVANCED_FACE('',(#2159),#2173,.F.);-#2159 = FACE_BOUND('',#2160,.T.);-#2160 = EDGE_LOOP('',(#2161,#2196,#2219,#2247));-#2161 = ORIENTED_EDGE('',*,*,#2162,.F.);-#2162 = EDGE_CURVE('',#2163,#2165,#2167,.T.);-#2163 = VERTEX_POINT('',#2164);-#2164 = CARTESIAN_POINT('',(0.95,0.9,-0.625));-#2165 = VERTEX_POINT('',#2166);-#2166 = CARTESIAN_POINT('',(0.525,0.9,-0.625));-#2167 = SURFACE_CURVE('',#2168,(#2172,#2184),.PCURVE_S1.);-#2168 = LINE('',#2169,#2170);-#2169 = CARTESIAN_POINT('',(0.5,0.9,-0.625));-#2170 = VECTOR('',#2171,1.);-#2171 = DIRECTION('',(-1.,-0.,-0.));-#2172 = PCURVE('',#2173,#2178);-#2173 = PLANE('',#2174);-#2174 = AXIS2_PLACEMENT_3D('',#2175,#2176,#2177);-#2175 = CARTESIAN_POINT('',(1.,0.95,-0.625));-#2176 = DIRECTION('',(0.,0.,1.));-#2177 = DIRECTION('',(-1.,0.,0.));-#2178 = DEFINITIONAL_REPRESENTATION('',(#2179),#2183);-#2179 = LINE('',#2180,#2181);-#2180 = CARTESIAN_POINT('',(0.5,5.E-02));-#2181 = VECTOR('',#2182,1.);-#2182 = DIRECTION('',(1.,0.));-#2183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2184 = PCURVE('',#2185,#2190);-#2185 = CYLINDRICAL_SURFACE('',#2186,5.E-02);-#2186 = AXIS2_PLACEMENT_3D('',#2187,#2188,#2189);-#2187 = CARTESIAN_POINT('',(0.,0.9,-0.575));-#2188 = DIRECTION('',(-1.,0.,0.));-#2189 = DIRECTION('',(0.,0.,-1.));-#2190 = DEFINITIONAL_REPRESENTATION('',(#2191),#2195);-#2191 = LINE('',#2192,#2193);-#2192 = CARTESIAN_POINT('',(6.28318530718,-0.5));-#2193 = VECTOR('',#2194,1.);-#2194 = DIRECTION('',(0.,1.));-#2195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2196 = ORIENTED_EDGE('',*,*,#2197,.F.);-#2197 = EDGE_CURVE('',#2198,#2163,#2200,.T.);-#2198 = VERTEX_POINT('',#2199);-#2199 = CARTESIAN_POINT('',(0.95,5.E-02,-0.625));-#2200 = SURFACE_CURVE('',#2201,(#2205,#2212),.PCURVE_S1.);-#2201 = LINE('',#2202,#2203);-#2202 = CARTESIAN_POINT('',(0.95,0.95,-0.625));-#2203 = VECTOR('',#2204,1.);-#2204 = DIRECTION('',(-0.,1.,-0.));-#2205 = PCURVE('',#2173,#2206);-#2206 = DEFINITIONAL_REPRESENTATION('',(#2207),#2211);-#2207 = LINE('',#2208,#2209);-#2208 = CARTESIAN_POINT('',(5.E-02,0.));-#2209 = VECTOR('',#2210,1.);-#2210 = DIRECTION('',(0.,-1.));-#2211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2212 = PCURVE('',#1801,#2213);-#2213 = DEFINITIONAL_REPRESENTATION('',(#2214),#2218);-#2214 = LINE('',#2215,#2216);-#2215 = CARTESIAN_POINT('',(0.,0.));-#2216 = VECTOR('',#2217,1.);-#2217 = DIRECTION('',(0.,-1.));-#2218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2219 = ORIENTED_EDGE('',*,*,#2220,.F.);-#2220 = EDGE_CURVE('',#2221,#2198,#2223,.T.);-#2221 = VERTEX_POINT('',#2222);-#2222 = CARTESIAN_POINT('',(0.525,5.E-02,-0.625));-#2223 = SURFACE_CURVE('',#2224,(#2228,#2235),.PCURVE_S1.);-#2224 = LINE('',#2225,#2226);-#2225 = CARTESIAN_POINT('',(1.,5.E-02,-0.625));-#2226 = VECTOR('',#2227,1.);-#2227 = DIRECTION('',(1.,0.,0.));-#2228 = PCURVE('',#2173,#2229);-#2229 = DEFINITIONAL_REPRESENTATION('',(#2230),#2234);-#2230 = LINE('',#2231,#2232);-#2231 = CARTESIAN_POINT('',(0.,0.9));-#2232 = VECTOR('',#2233,1.);-#2233 = DIRECTION('',(-1.,0.));-#2234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2235 = PCURVE('',#2236,#2241);-#2236 = CYLINDRICAL_SURFACE('',#2237,5.E-02);-#2237 = AXIS2_PLACEMENT_3D('',#2238,#2239,#2240);-#2238 = CARTESIAN_POINT('',(1.,5.E-02,-0.575));-#2239 = DIRECTION('',(1.,0.,0.));-#2240 = DIRECTION('',(0.,0.,1.));-#2241 = DEFINITIONAL_REPRESENTATION('',(#2242),#2246);-#2242 = LINE('',#2243,#2244);-#2243 = CARTESIAN_POINT('',(3.14159265359,0.));-#2244 = VECTOR('',#2245,1.);-#2245 = DIRECTION('',(0.,1.));-#2246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2247 = ORIENTED_EDGE('',*,*,#2248,.F.);-#2248 = EDGE_CURVE('',#2165,#2221,#2249,.T.);-#2249 = SURFACE_CURVE('',#2250,(#2254,#2261),.PCURVE_S1.);-#2250 = LINE('',#2251,#2252);-#2251 = CARTESIAN_POINT('',(0.525,0.95,-0.625));-#2252 = VECTOR('',#2253,1.);-#2253 = DIRECTION('',(0.,-1.,0.));-#2254 = PCURVE('',#2173,#2255);-#2255 = DEFINITIONAL_REPRESENTATION('',(#2256),#2260);-#2256 = LINE('',#2257,#2258);-#2257 = CARTESIAN_POINT('',(0.475,0.));-#2258 = VECTOR('',#2259,1.);-#2259 = DIRECTION('',(0.,1.));-#2260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2261 = PCURVE('',#1983,#2262);-#2262 = DEFINITIONAL_REPRESENTATION('',(#2263),#2267);-#2263 = LINE('',#2264,#2265);-#2264 = CARTESIAN_POINT('',(6.28318530718,0.));-#2265 = VECTOR('',#2266,1.);-#2266 = DIRECTION('',(0.,1.));-#2267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2268 = ADVANCED_FACE('',(#2269),#2283,.T.);-#2269 = FACE_BOUND('',#2270,.T.);-#2270 = EDGE_LOOP('',(#2271,#2301,#2324,#2347));-#2271 = ORIENTED_EDGE('',*,*,#2272,.F.);-#2272 = EDGE_CURVE('',#2273,#2275,#2277,.T.);-#2273 = VERTEX_POINT('',#2274);-#2274 = CARTESIAN_POINT('',(0.95,0.95,0.575));-#2275 = VERTEX_POINT('',#2276);-#2276 = CARTESIAN_POINT('',(0.525,0.95,0.575));-#2277 = SURFACE_CURVE('',#2278,(#2282,#2294),.PCURVE_S1.);-#2278 = LINE('',#2279,#2280);-#2279 = CARTESIAN_POINT('',(0.5,0.95,0.575));-#2280 = VECTOR('',#2281,1.);-#2281 = DIRECTION('',(-1.,0.,2.168404344971E-16));-#2282 = PCURVE('',#2283,#2288);-#2283 = PLANE('',#2284);-#2284 = AXIS2_PLACEMENT_3D('',#2285,#2286,#2287);-#2285 = CARTESIAN_POINT('',(0.,0.95,0.));-#2286 = DIRECTION('',(0.,1.,0.));-#2287 = DIRECTION('',(0.,-0.,1.));-#2288 = DEFINITIONAL_REPRESENTATION('',(#2289),#2293);-#2289 = LINE('',#2290,#2291);-#2290 = CARTESIAN_POINT('',(0.575,0.5));-#2291 = VECTOR('',#2292,1.);-#2292 = DIRECTION('',(2.168404344971E-16,-1.));-#2293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2294 = PCURVE('',#1890,#2295);-#2295 = DEFINITIONAL_REPRESENTATION('',(#2296),#2300);-#2296 = LINE('',#2297,#2298);-#2297 = CARTESIAN_POINT('',(4.712388980385,0.5));-#2298 = VECTOR('',#2299,1.);-#2299 = DIRECTION('',(0.,-1.));-#2300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2301 = ORIENTED_EDGE('',*,*,#2302,.F.);-#2302 = EDGE_CURVE('',#2303,#2273,#2305,.T.);-#2303 = VERTEX_POINT('',#2304);-#2304 = CARTESIAN_POINT('',(0.95,0.95,-0.575));-#2305 = SURFACE_CURVE('',#2306,(#2310,#2317),.PCURVE_S1.);-#2306 = LINE('',#2307,#2308);-#2307 = CARTESIAN_POINT('',(0.95,0.95,0.625));-#2308 = VECTOR('',#2309,1.);-#2309 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#2310 = PCURVE('',#2283,#2311);-#2311 = DEFINITIONAL_REPRESENTATION('',(#2312),#2316);-#2312 = LINE('',#2313,#2314);-#2313 = CARTESIAN_POINT('',(0.625,0.95));-#2314 = VECTOR('',#2315,1.);-#2315 = DIRECTION('',(1.,-1.734723475977E-16));-#2316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2317 = PCURVE('',#1719,#2318);-#2318 = DEFINITIONAL_REPRESENTATION('',(#2319),#2323);-#2319 = LINE('',#2320,#2321);-#2320 = CARTESIAN_POINT('',(4.712388980385,-0.625));-#2321 = VECTOR('',#2322,1.);-#2322 = DIRECTION('',(0.,-1.));-#2323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2324 = ORIENTED_EDGE('',*,*,#2325,.F.);-#2325 = EDGE_CURVE('',#2326,#2303,#2328,.T.);-#2326 = VERTEX_POINT('',#2327);-#2327 = CARTESIAN_POINT('',(0.525,0.95,-0.575));-#2328 = SURFACE_CURVE('',#2329,(#2333,#2340),.PCURVE_S1.);-#2329 = LINE('',#2330,#2331);-#2330 = CARTESIAN_POINT('',(1.,0.95,-0.575));-#2331 = VECTOR('',#2332,1.);-#2332 = DIRECTION('',(1.,0.,0.));-#2333 = PCURVE('',#2283,#2334);-#2334 = DEFINITIONAL_REPRESENTATION('',(#2335),#2339);-#2335 = LINE('',#2336,#2337);-#2336 = CARTESIAN_POINT('',(-0.575,1.));-#2337 = VECTOR('',#2338,1.);-#2338 = DIRECTION('',(0.,1.));-#2339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2340 = PCURVE('',#2185,#2341);+#2106 = CARTESIAN_POINT('',(0.95,1.24999955,-0.575));+#2107 = SURFACE_CURVE('',#2108,(#2111,#2117),.PCURVE_S1.);+#2108 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2109,#2110),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#2109 = CARTESIAN_POINT('',(0.95,1.24999955,-0.575));+#2110 = CARTESIAN_POINT('',(0.95,1.24999955,0.575));+#2111 = PCURVE('',#2086,#2112);+#2112 = DEFINITIONAL_REPRESENTATION('',(#2113),#2116);+#2113 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2114,#2115),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#2114 = CARTESIAN_POINT('',(-0.575,0.95));+#2115 = CARTESIAN_POINT('',(0.575,0.95));+#2116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2117 = PCURVE('',#1513,#2118);+#2118 = DEFINITIONAL_REPRESENTATION('',(#2119),#2123);+#2119 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2120,#2121,#2122),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-1.2,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#2120 = CARTESIAN_POINT('',(4.712388980385,0.575));+#2121 = CARTESIAN_POINT('',(4.712388980385,-3.367404394543E-17));+#2122 = CARTESIAN_POINT('',(4.712388980385,-0.575));+#2123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2124 = ORIENTED_EDGE('',*,*,#2125,.F.);+#2125 = EDGE_CURVE('',#2126,#2105,#2128,.T.);+#2126 = VERTEX_POINT('',#2127);+#2127 = CARTESIAN_POINT('',(0.525,1.24999955,-0.575));+#2128 = SURFACE_CURVE('',#2129,(#2132,#2138),.PCURVE_S1.);+#2129 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2130,#2131),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#2130 = CARTESIAN_POINT('',(0.525,1.24999955,-0.575));+#2131 = CARTESIAN_POINT('',(0.95,1.24999955,-0.575));+#2132 = PCURVE('',#2086,#2133);+#2133 = DEFINITIONAL_REPRESENTATION('',(#2134),#2137);+#2134 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2135,#2136),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.475,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#2135 = CARTESIAN_POINT('',(-0.575,0.525));+#2136 = CARTESIAN_POINT('',(-0.575,0.95));+#2137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2138 = PCURVE('',#1991,#2139);+#2139 = DEFINITIONAL_REPRESENTATION('',(#2140),#2144);+#2140 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2141,#2142,#2143),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.475,-5.E-02),+ .PIECEWISE_BEZIER_KNOTS.);+#2141 = CARTESIAN_POINT('',(4.712388980385,-0.525));+#2142 = CARTESIAN_POINT('',(4.712388980385,-0.7375));+#2143 = CARTESIAN_POINT('',(4.712388980385,-0.95));+#2144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2145 = ORIENTED_EDGE('',*,*,#2146,.F.);+#2146 = EDGE_CURVE('',#2079,#2126,#2147,.T.);+#2147 = SURFACE_CURVE('',#2148,(#2151,#2157),.PCURVE_S1.);+#2148 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2149,#2150),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#2149 = CARTESIAN_POINT('',(0.525,1.24999955,0.575));+#2150 = CARTESIAN_POINT('',(0.525,1.24999955,-0.575));+#2151 = PCURVE('',#2086,#2152);+#2152 = DEFINITIONAL_REPRESENTATION('',(#2153),#2156);+#2153 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2154,#2155),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#2154 = CARTESIAN_POINT('',(0.575,0.525));+#2155 = CARTESIAN_POINT('',(-0.575,0.525));+#2156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2157 = PCURVE('',#1953,#2158);+#2158 = DEFINITIONAL_REPRESENTATION('',(#2159),#2163);+#2159 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2160,#2161,#2162),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-1.15,0.),.PIECEWISE_BEZIER_KNOTS.);+#2160 = CARTESIAN_POINT('',(4.712388980385,0.575));+#2161 = CARTESIAN_POINT('',(4.712388980385,1.255123456148E-16));+#2162 = CARTESIAN_POINT('',(4.712388980385,-0.575));+#2163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2164 = ADVANCED_FACE('',(#2165),#2178,.F.);+#2165 = FACE_BOUND('',#2166,.T.);+#2166 = EDGE_LOOP('',(#2167,#2195,#2216,#2237));+#2167 = ORIENTED_EDGE('',*,*,#2168,.F.);+#2168 = EDGE_CURVE('',#2169,#2171,#2173,.T.);+#2169 = VERTEX_POINT('',#2170);+#2170 = CARTESIAN_POINT('',(0.95,0.,-0.575));+#2171 = VERTEX_POINT('',#2172);+#2172 = CARTESIAN_POINT('',(0.525,0.,-0.575));+#2173 = SURFACE_CURVE('',#2174,(#2177,#2188),.PCURVE_S1.);+#2174 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2175,#2176),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.95,-0.525),.PIECEWISE_BEZIER_KNOTS.);+#2175 = CARTESIAN_POINT('',(0.95,0.,-0.575));+#2176 = CARTESIAN_POINT('',(0.525,0.,-0.575));+#2177 = PCURVE('',#2178,#2183);+#2178 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2179,#2180)+ ,(#2181,#2182+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-0.575,0.575),(0.525,0.95),+ .PIECEWISE_BEZIER_KNOTS.);+#2179 = CARTESIAN_POINT('',(0.525,0.,-0.575));+#2180 = CARTESIAN_POINT('',(0.95,0.,-0.575));+#2181 = CARTESIAN_POINT('',(0.525,0.,0.575));+#2182 = CARTESIAN_POINT('',(0.95,0.,0.575));+#2183 = DEFINITIONAL_REPRESENTATION('',(#2184),#2187);+#2184 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2185,#2186),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.95,-0.525),.PIECEWISE_BEZIER_KNOTS.);+#2185 = CARTESIAN_POINT('',(-0.575,0.95));+#2186 = CARTESIAN_POINT('',(-0.575,0.525));+#2187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2188 = PCURVE('',#2040,#2189);+#2189 = DEFINITIONAL_REPRESENTATION('',(#2190),#2194);+#2190 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2191,#2192,#2193),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.95,-0.525),.PIECEWISE_BEZIER_KNOTS.);+#2191 = CARTESIAN_POINT('',(1.570796326795,-5.E-02));+#2192 = CARTESIAN_POINT('',(1.570796326795,-0.2625));+#2193 = CARTESIAN_POINT('',(1.570796326795,-0.475));+#2194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2195 = ORIENTED_EDGE('',*,*,#2196,.F.);+#2196 = EDGE_CURVE('',#2197,#2169,#2199,.T.);+#2197 = VERTEX_POINT('',#2198);+#2198 = CARTESIAN_POINT('',(0.95,0.,0.575));+#2199 = SURFACE_CURVE('',#2200,(#2203,#2209),.PCURVE_S1.);+#2200 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2201,#2202),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#2201 = CARTESIAN_POINT('',(0.95,0.,0.575));+#2202 = CARTESIAN_POINT('',(0.95,0.,-0.575));+#2203 = PCURVE('',#2178,#2204);+#2204 = DEFINITIONAL_REPRESENTATION('',(#2205),#2208);+#2205 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2206,#2207),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#2206 = CARTESIAN_POINT('',(0.575,0.95));+#2207 = CARTESIAN_POINT('',(-0.575,0.95));+#2208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2209 = PCURVE('',#1569,#2210);+#2210 = DEFINITIONAL_REPRESENTATION('',(#2211),#2215);+#2211 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2212,#2213,#2214),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#2212 = CARTESIAN_POINT('',(1.570796326795,1.2));+#2213 = CARTESIAN_POINT('',(1.570796326795,0.625));+#2214 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#2215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2216 = ORIENTED_EDGE('',*,*,#2217,.F.);+#2217 = EDGE_CURVE('',#2218,#2197,#2220,.T.);+#2218 = VERTEX_POINT('',#2219);+#2219 = CARTESIAN_POINT('',(0.525,0.,0.575));+#2220 = SURFACE_CURVE('',#2221,(#2224,#2230),.PCURVE_S1.);+#2221 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2222,#2223),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.525,0.95),.PIECEWISE_BEZIER_KNOTS.);+#2222 = CARTESIAN_POINT('',(0.525,0.,0.575));+#2223 = CARTESIAN_POINT('',(0.95,0.,0.575));+#2224 = PCURVE('',#2178,#2225);+#2225 = DEFINITIONAL_REPRESENTATION('',(#2226),#2229);+#2226 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2227,#2228),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.525,0.95),.PIECEWISE_BEZIER_KNOTS.);+#2227 = CARTESIAN_POINT('',(0.575,0.525));+#2228 = CARTESIAN_POINT('',(0.575,0.95));+#2229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2230 = PCURVE('',#1633,#2231);+#2231 = DEFINITIONAL_REPRESENTATION('',(#2232),#2236);+#2232 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2233,#2234,#2235),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.525,0.95),.PIECEWISE_BEZIER_KNOTS.);+#2233 = CARTESIAN_POINT('',(1.570796326795,0.475));+#2234 = CARTESIAN_POINT('',(1.570796326795,0.2625));+#2235 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#2236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2237 = ORIENTED_EDGE('',*,*,#2238,.F.);+#2238 = EDGE_CURVE('',#2171,#2218,#2239,.T.);+#2239 = SURFACE_CURVE('',#2240,(#2243,#2249),.PCURVE_S1.);+#2240 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2241,#2242),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#2241 = CARTESIAN_POINT('',(0.525,0.,-0.575));+#2242 = CARTESIAN_POINT('',(0.525,0.,0.575));+#2243 = PCURVE('',#2178,#2244);+#2244 = DEFINITIONAL_REPRESENTATION('',(#2245),#2248);+#2245 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2246,#2247),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#2246 = CARTESIAN_POINT('',(-0.575,0.525));+#2247 = CARTESIAN_POINT('',(0.575,0.525));+#2248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2249 = PCURVE('',#1840,#2250);+#2250 = DEFINITIONAL_REPRESENTATION('',(#2251),#2255);+#2251 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2252,#2253,#2254),+ .UNSPECIFIED.,.F.,.F.,(3,3),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#2252 = CARTESIAN_POINT('',(1.570796326795,-5.E-02));+#2253 = CARTESIAN_POINT('',(1.570796326795,-0.625));+#2254 = CARTESIAN_POINT('',(1.570796326795,-1.2));+#2255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2256 = ADVANCED_FACE('',(#2257),#1682,.T.);+#2257 = FACE_BOUND('',#2258,.T.);+#2258 = EDGE_LOOP('',(#2259,#2260,#2291,#2292));+#2259 = ORIENTED_EDGE('',*,*,#1668,.T.);+#2260 = ORIENTED_EDGE('',*,*,#2261,.T.);+#2261 = EDGE_CURVE('',#1648,#2077,#2262,.T.);+#2262 = SURFACE_CURVE('',#2263,(#2267,#2274),.PCURVE_S1.);+#2263 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2264,#2265,#2266),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2264 = CARTESIAN_POINT('',(0.95,1.1842101,0.625));+#2265 = CARTESIAN_POINT('',(0.95,1.24999955,0.625));+#2266 = CARTESIAN_POINT('',(0.95,1.24999955,0.575));+#2267 = PCURVE('',#1682,#2268);+#2268 = DEFINITIONAL_REPRESENTATION('',(#2269),#2273);+#2269 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2270,#2271,#2272),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2270 = CARTESIAN_POINT('',(6.28318530718,0.95));+#2271 = CARTESIAN_POINT('',(5.497787143782,0.95));+#2272 = CARTESIAN_POINT('',(4.712388980385,0.95));+#2273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2274 = PCURVE('',#2275,#2285);+#2275 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#2276,#2277,#2278)+ ,(#2279,#2280,#2281)+ ,(#2282,#2283,#2284+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 3.14159265359,4.712388980385),(-1.570796326795,0.),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2276 = CARTESIAN_POINT('',(0.95,1.24999955,0.575));+#2277 = CARTESIAN_POINT('',(1.,1.24999955,0.575));+#2278 = CARTESIAN_POINT('',(1.,1.1842101,0.575));+#2279 = CARTESIAN_POINT('',(0.95,1.24999955,0.575));+#2280 = CARTESIAN_POINT('',(1.,1.24999955,0.625));+#2281 = CARTESIAN_POINT('',(1.,1.1842101,0.625));+#2282 = CARTESIAN_POINT('',(0.95,1.24999955,0.575));+#2283 = CARTESIAN_POINT('',(0.95,1.24999955,0.625));+#2284 = CARTESIAN_POINT('',(0.95,1.1842101,0.625));+#2285 = DEFINITIONAL_REPRESENTATION('',(#2286),#2290);+#2286 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2287,#2288,#2289),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2287 = CARTESIAN_POINT('',(4.712388980385,0.));+#2288 = CARTESIAN_POINT('',(4.712388980385,-0.785398163397));+#2289 = CARTESIAN_POINT('',(4.712388980385,-1.570796326795));+#2290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2291 = ORIENTED_EDGE('',*,*,#2076,.T.);+#2292 = ORIENTED_EDGE('',*,*,#2293,.F.);+#2293 = EDGE_CURVE('',#1669,#2079,#2294,.T.);+#2294 = SURFACE_CURVE('',#2295,(#2299,#2306),.PCURVE_S1.);+#2295 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2296,#2297,#2298),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2296 = CARTESIAN_POINT('',(0.525,1.1842101,0.625));+#2297 = CARTESIAN_POINT('',(0.525,1.24999955,0.625));+#2298 = CARTESIAN_POINT('',(0.525,1.24999955,0.575));+#2299 = PCURVE('',#1682,#2300);+#2300 = DEFINITIONAL_REPRESENTATION('',(#2301),#2305);+#2301 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2302,#2303,#2304),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2302 = CARTESIAN_POINT('',(6.28318530718,0.525));+#2303 = CARTESIAN_POINT('',(5.497787143782,0.525));+#2304 = CARTESIAN_POINT('',(4.712388980385,0.525));+#2305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2306 = PCURVE('',#1924,#2307);+#2307 = DEFINITIONAL_REPRESENTATION('',(#2308),#2312);+#2308 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2309,#2310,#2311),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2309 = CARTESIAN_POINT('',(6.28318530718,6.28318530718));+#2310 = CARTESIAN_POINT('',(5.497787143782,6.28318530718));+#2311 = CARTESIAN_POINT('',(4.712388980385,6.28318530718));+#2312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2313 = ADVANCED_FACE('',(#2314),#1541,.T.);+#2314 = FACE_BOUND('',#2315,.T.);+#2315 = EDGE_LOOP('',(#2316,#2347,#2348,#2369));+#2316 = ORIENTED_EDGE('',*,*,#2317,.T.);+#2317 = EDGE_CURVE('',#1613,#1528,#2318,.T.);+#2318 = SURFACE_CURVE('',#2319,(#2323,#2330),.PCURVE_S1.);+#2319 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2320,#2321,#2322),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2320 = CARTESIAN_POINT('',(0.95,6.578945E-02,0.625));+#2321 = CARTESIAN_POINT('',(1.,6.578945E-02,0.625));+#2322 = CARTESIAN_POINT('',(1.,6.578945E-02,0.575));+#2323 = PCURVE('',#1541,#2324);+#2324 = DEFINITIONAL_REPRESENTATION('',(#2325),#2329);+#2325 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2326,#2327,#2328),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#2326 = CARTESIAN_POINT('',(3.14159265359,0.9));+#2327 = CARTESIAN_POINT('',(2.356194490192,0.9));+#2328 = CARTESIAN_POINT('',(1.570796326795,0.9));+#2329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2330 = PCURVE('',#2331,#2341);+#2331 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#2332,#2333,#2334)+ ,(#2335,#2336,#2337)+ ,(#2338,#2339,#2340+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 3.14159265359,4.712388980385),(-4.163336342344E-16,1.570796326795),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2332 = CARTESIAN_POINT('',(1.,6.578945E-02,0.575));+#2333 = CARTESIAN_POINT('',(1.,0.,0.575));+#2334 = CARTESIAN_POINT('',(0.95,0.,0.575));+#2335 = CARTESIAN_POINT('',(1.,6.578945E-02,0.625));+#2336 = CARTESIAN_POINT('',(1.,0.,0.625));+#2337 = CARTESIAN_POINT('',(0.95,0.,0.575));+#2338 = CARTESIAN_POINT('',(0.95,6.578945E-02,0.625));+#2339 = CARTESIAN_POINT('',(0.95,0.,0.625));+#2340 = CARTESIAN_POINT('',(0.95,0.,0.575)); #2341 = DEFINITIONAL_REPRESENTATION('',(#2342),#2346);-#2342 = LINE('',#2343,#2344);-#2343 = CARTESIAN_POINT('',(4.712388980385,-1.));-#2344 = VECTOR('',#2345,1.);-#2345 = DIRECTION('',(0.,-1.));+#2342 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2343,#2344,#2345),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#2343 = CARTESIAN_POINT('',(4.712388980385,-4.163336342344E-16));+#2344 = CARTESIAN_POINT('',(3.926990816987,-4.163336342344E-16));+#2345 = CARTESIAN_POINT('',(3.14159265359,-4.163336342344E-16)); #2346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2347 = ORIENTED_EDGE('',*,*,#2348,.F.);-#2348 = EDGE_CURVE('',#2275,#2326,#2349,.T.);-#2349 = SURFACE_CURVE('',#2350,(#2354,#2361),.PCURVE_S1.);-#2350 = LINE('',#2351,#2352);-#2351 = CARTESIAN_POINT('',(0.525,0.95,-0.575));-#2352 = VECTOR('',#2353,1.);-#2353 = DIRECTION('',(1.734723475977E-16,0.,-1.));-#2354 = PCURVE('',#2283,#2355);-#2355 = DEFINITIONAL_REPRESENTATION('',(#2356),#2360);-#2356 = LINE('',#2357,#2358);-#2357 = CARTESIAN_POINT('',(-0.575,0.525));-#2358 = VECTOR('',#2359,1.);-#2359 = DIRECTION('',(-1.,1.734723475977E-16));-#2360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2361 = PCURVE('',#2147,#2362);-#2362 = DEFINITIONAL_REPRESENTATION('',(#2363),#2367);-#2363 = LINE('',#2364,#2365);-#2364 = CARTESIAN_POINT('',(4.712388980385,-0.575));-#2365 = VECTOR('',#2366,1.);-#2366 = DIRECTION('',(0.,-1.));-#2367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2368 = ADVANCED_FACE('',(#2369),#2383,.F.);-#2369 = FACE_BOUND('',#2370,.T.);-#2370 = EDGE_LOOP('',(#2371,#2401,#2424,#2447));-#2371 = ORIENTED_EDGE('',*,*,#2372,.F.);-#2372 = EDGE_CURVE('',#2373,#2375,#2377,.T.);-#2373 = VERTEX_POINT('',#2374);-#2374 = CARTESIAN_POINT('',(0.95,0.,-0.575));-#2375 = VERTEX_POINT('',#2376);-#2376 = CARTESIAN_POINT('',(0.525,0.,-0.575));-#2377 = SURFACE_CURVE('',#2378,(#2382,#2394),.PCURVE_S1.);-#2378 = LINE('',#2379,#2380);-#2379 = CARTESIAN_POINT('',(0.,0.,-0.575));-#2380 = VECTOR('',#2381,1.);-#2381 = DIRECTION('',(-1.,-0.,-0.));-#2382 = PCURVE('',#2383,#2388);-#2383 = PLANE('',#2384);-#2384 = AXIS2_PLACEMENT_3D('',#2385,#2386,#2387);-#2385 = CARTESIAN_POINT('',(0.,0.,0.));-#2386 = DIRECTION('',(0.,1.,0.));-#2387 = DIRECTION('',(0.,-0.,1.));-#2388 = DEFINITIONAL_REPRESENTATION('',(#2389),#2393);-#2389 = LINE('',#2390,#2391);-#2390 = CARTESIAN_POINT('',(-0.575,0.));-#2391 = VECTOR('',#2392,1.);-#2392 = DIRECTION('',(0.,-1.));-#2393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2394 = PCURVE('',#2236,#2395);-#2395 = DEFINITIONAL_REPRESENTATION('',(#2396),#2400);-#2396 = LINE('',#2397,#2398);-#2397 = CARTESIAN_POINT('',(1.570796326795,-1.));-#2398 = VECTOR('',#2399,1.);-#2399 = DIRECTION('',(0.,-1.));-#2400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2401 = ORIENTED_EDGE('',*,*,#2402,.F.);-#2402 = EDGE_CURVE('',#2403,#2373,#2405,.T.);-#2403 = VERTEX_POINT('',#2404);-#2404 = CARTESIAN_POINT('',(0.95,0.,0.575));-#2405 = SURFACE_CURVE('',#2406,(#2410,#2417),.PCURVE_S1.);-#2406 = LINE('',#2407,#2408);-#2407 = CARTESIAN_POINT('',(0.95,0.,1.647987302178E-16));-#2408 = VECTOR('',#2409,1.);-#2409 = DIRECTION('',(1.734723475977E-16,-0.,-1.));-#2410 = PCURVE('',#2383,#2411);+#2347 = ORIENTED_EDGE('',*,*,#1527,.T.);+#2348 = ORIENTED_EDGE('',*,*,#2349,.T.);+#2349 = EDGE_CURVE('',#1493,#1648,#2350,.T.);+#2350 = SURFACE_CURVE('',#2351,(#2355,#2362),.PCURVE_S1.);+#2351 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2352,#2353,#2354),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2352 = CARTESIAN_POINT('',(1.,1.1842101,0.575));+#2353 = CARTESIAN_POINT('',(1.,1.1842101,0.625));+#2354 = CARTESIAN_POINT('',(0.95,1.1842101,0.625));+#2355 = PCURVE('',#1541,#2356);+#2356 = DEFINITIONAL_REPRESENTATION('',(#2357),#2361);+#2357 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2358,#2359,#2360),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#2358 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#2359 = CARTESIAN_POINT('',(2.356194490192,5.E-02));+#2360 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#2361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2362 = PCURVE('',#2275,#2363);+#2363 = DEFINITIONAL_REPRESENTATION('',(#2364),#2368);+#2364 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2365,#2366,#2367),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#2365 = CARTESIAN_POINT('',(3.14159265359,0.));+#2366 = CARTESIAN_POINT('',(3.926990816987,0.));+#2367 = CARTESIAN_POINT('',(4.712388980385,0.));+#2368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2369 = ORIENTED_EDGE('',*,*,#1647,.T.);+#2370 = ADVANCED_FACE('',(#2371),#1633,.T.);+#2371 = FACE_BOUND('',#2372,.T.);+#2372 = EDGE_LOOP('',(#2373,#2374,#2395,#2396));+#2373 = ORIENTED_EDGE('',*,*,#2217,.T.);+#2374 = ORIENTED_EDGE('',*,*,#2375,.T.);+#2375 = EDGE_CURVE('',#2197,#1613,#2376,.T.);+#2376 = SURFACE_CURVE('',#2377,(#2381,#2388),.PCURVE_S1.);+#2377 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2378,#2379,#2380),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2378 = CARTESIAN_POINT('',(0.95,-2.739036081278E-17,0.575));+#2379 = CARTESIAN_POINT('',(0.95,-4.565060135464E-17,0.625));+#2380 = CARTESIAN_POINT('',(0.95,6.578945E-02,0.625));+#2381 = PCURVE('',#1633,#2382);+#2382 = DEFINITIONAL_REPRESENTATION('',(#2383),#2387);+#2383 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2384,#2385,#2386),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#2384 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#2385 = CARTESIAN_POINT('',(2.356194490192,5.E-02));+#2386 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#2387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2388 = PCURVE('',#2331,#2389);+#2389 = DEFINITIONAL_REPRESENTATION('',(#2390),#2394);+#2390 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2391,#2392,#2393),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#2391 = CARTESIAN_POINT('',(4.712388980385,1.570796326795));+#2392 = CARTESIAN_POINT('',(4.712388980385,0.785398163397));+#2393 = CARTESIAN_POINT('',(4.712388980385,2.775557561563E-16));+#2394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2395 = ORIENTED_EDGE('',*,*,#1612,.T.);+#2396 = ORIENTED_EDGE('',*,*,#2397,.F.);+#2397 = EDGE_CURVE('',#2218,#1615,#2398,.T.);+#2398 = SURFACE_CURVE('',#2399,(#2403,#2410),.PCURVE_S1.);+#2399 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2400,#2401,#2402),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2400 = CARTESIAN_POINT('',(0.525,0.,0.575));+#2401 = CARTESIAN_POINT('',(0.525,-1.826024054186E-17,0.625));+#2402 = CARTESIAN_POINT('',(0.525,6.578945E-02,0.625));+#2403 = PCURVE('',#1633,#2404);+#2404 = DEFINITIONAL_REPRESENTATION('',(#2405),#2409);+#2405 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2406,#2407,#2408),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#2406 = CARTESIAN_POINT('',(1.570796326795,0.475));+#2407 = CARTESIAN_POINT('',(2.356194490192,0.475));+#2408 = CARTESIAN_POINT('',(3.14159265359,0.475));+#2409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2410 = PCURVE('',#1870,#2411); #2411 = DEFINITIONAL_REPRESENTATION('',(#2412),#2416);-#2412 = LINE('',#2413,#2414);-#2413 = CARTESIAN_POINT('',(1.647987302178E-16,0.95));-#2414 = VECTOR('',#2415,1.);-#2415 = DIRECTION('',(-1.,1.734723475977E-16));+#2412 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2413,#2414,#2415),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#2413 = CARTESIAN_POINT('',(1.570796326795,6.28318530718));+#2414 = CARTESIAN_POINT('',(0.785398163397,6.28318530718));+#2415 = CARTESIAN_POINT('',(0.,6.28318530718)); #2416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2417 = PCURVE('',#1775,#2418);-#2418 = DEFINITIONAL_REPRESENTATION('',(#2419),#2423);-#2419 = LINE('',#2420,#2421);-#2420 = CARTESIAN_POINT('',(1.570796326795,0.625));-#2421 = VECTOR('',#2422,1.);-#2422 = DIRECTION('',(0.,-1.));-#2423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2424 = ORIENTED_EDGE('',*,*,#2425,.F.);-#2425 = EDGE_CURVE('',#2426,#2403,#2428,.T.);-#2426 = VERTEX_POINT('',#2427);-#2427 = CARTESIAN_POINT('',(0.525,0.,0.575));-#2428 = SURFACE_CURVE('',#2429,(#2433,#2440),.PCURVE_S1.);-#2429 = LINE('',#2430,#2431);-#2430 = CARTESIAN_POINT('',(1.246832498358E-16,0.,0.575));-#2431 = VECTOR('',#2432,1.);-#2432 = DIRECTION('',(1.,-0.,-2.168404344971E-16));-#2433 = PCURVE('',#2383,#2434);-#2434 = DEFINITIONAL_REPRESENTATION('',(#2435),#2439);-#2435 = LINE('',#2436,#2437);-#2436 = CARTESIAN_POINT('',(0.575,1.246832498358E-16));-#2437 = VECTOR('',#2438,1.);-#2438 = DIRECTION('',(-2.168404344971E-16,1.));-#2439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2440 = PCURVE('',#1839,#2441);-#2441 = DEFINITIONAL_REPRESENTATION('',(#2442),#2446);-#2442 = LINE('',#2443,#2444);-#2443 = CARTESIAN_POINT('',(1.570796326795,1.));-#2444 = VECTOR('',#2445,1.);-#2445 = DIRECTION('',(0.,-1.));-#2446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2447 = ORIENTED_EDGE('',*,*,#2448,.F.);-#2448 = EDGE_CURVE('',#2375,#2426,#2449,.T.);+#2417 = ADVANCED_FACE('',(#2418),#2275,.T.);+#2418 = FACE_BOUND('',#2419,.T.);+#2419 = EDGE_LOOP('',(#2420,#2421,#2442));+#2420 = ORIENTED_EDGE('',*,*,#2349,.F.);+#2421 = ORIENTED_EDGE('',*,*,#2422,.T.);+#2422 = EDGE_CURVE('',#1493,#2077,#2423,.T.);+#2423 = SURFACE_CURVE('',#2424,(#2428,#2435),.PCURVE_S1.);+#2424 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2425,#2426,#2427),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2425 = CARTESIAN_POINT('',(1.,1.1842101,0.575));+#2426 = CARTESIAN_POINT('',(1.,1.24999955,0.575));+#2427 = CARTESIAN_POINT('',(0.95,1.24999955,0.575));+#2428 = PCURVE('',#2275,#2429);+#2429 = DEFINITIONAL_REPRESENTATION('',(#2430),#2434);+#2430 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2431,#2432,#2433),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#2431 = CARTESIAN_POINT('',(3.14159265359,0.));+#2432 = CARTESIAN_POINT('',(3.14159265359,-0.785398163397));+#2433 = CARTESIAN_POINT('',(3.14159265359,-1.570796326795));+#2434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2435 = PCURVE('',#1513,#2436);+#2436 = DEFINITIONAL_REPRESENTATION('',(#2437),#2441);+#2437 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2438,#2439,#2440),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#2438 = CARTESIAN_POINT('',(6.28318530718,-0.575));+#2439 = CARTESIAN_POINT('',(5.497787143782,-0.575));+#2440 = CARTESIAN_POINT('',(4.712388980385,-0.575));+#2441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2442 = ORIENTED_EDGE('',*,*,#2261,.F.);+#2443 = ADVANCED_FACE('',(#2444),#2331,.T.);+#2444 = FACE_BOUND('',#2445,.T.);+#2445 = EDGE_LOOP('',(#2446,#2447,#2468));+#2446 = ORIENTED_EDGE('',*,*,#2375,.F.);+#2447 = ORIENTED_EDGE('',*,*,#2448,.T.);+#2448 = EDGE_CURVE('',#2197,#1528,#2449,.T.); #2449 = SURFACE_CURVE('',#2450,(#2454,#2461),.PCURVE_S1.);-#2450 = LINE('',#2451,#2452);-#2451 = CARTESIAN_POINT('',(0.525,0.,9.107298248878E-17));-#2452 = VECTOR('',#2453,1.);-#2453 = DIRECTION('',(-1.734723475977E-16,-0.,1.));-#2454 = PCURVE('',#2383,#2455);+#2450 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2451,#2452,#2453),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2451 = CARTESIAN_POINT('',(0.95,0.,0.575));+#2452 = CARTESIAN_POINT('',(1.,0.,0.575));+#2453 = CARTESIAN_POINT('',(1.,6.578945E-02,0.575));+#2454 = PCURVE('',#2331,#2455); #2455 = DEFINITIONAL_REPRESENTATION('',(#2456),#2460);-#2456 = LINE('',#2457,#2458);-#2457 = CARTESIAN_POINT('',(9.107298248878E-17,0.525));-#2458 = VECTOR('',#2459,1.);-#2459 = DIRECTION('',(1.,-1.734723475977E-16));+#2456 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2457,#2458,#2459),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2457 = CARTESIAN_POINT('',(3.14159265359,1.570796326795));+#2458 = CARTESIAN_POINT('',(3.14159265359,0.785398163397));+#2459 = CARTESIAN_POINT('',(3.14159265359,-2.775557561563E-16)); #2460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2461 = PCURVE('',#2040,#2462);+#2461 = PCURVE('',#1569,#2462); #2462 = DEFINITIONAL_REPRESENTATION('',(#2463),#2467);-#2463 = LINE('',#2464,#2465);-#2464 = CARTESIAN_POINT('',(1.570796326795,-0.625));-#2465 = VECTOR('',#2466,1.);-#2466 = DIRECTION('',(0.,-1.));+#2463 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2464,#2465,#2466),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2464 = CARTESIAN_POINT('',(1.570796326795,1.2));+#2465 = CARTESIAN_POINT('',(2.356194490192,1.2));+#2466 = CARTESIAN_POINT('',(3.14159265359,1.2)); #2467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2468 = ADVANCED_FACE('',(#2469),#1890,.T.);-#2469 = FACE_BOUND('',#2470,.T.);-#2470 = EDGE_LOOP('',(#2471,#2472,#2521,#2522));-#2471 = ORIENTED_EDGE('',*,*,#1874,.T.);-#2472 = ORIENTED_EDGE('',*,*,#2473,.T.);-#2473 = EDGE_CURVE('',#1852,#2273,#2474,.T.);-#2474 = SURFACE_CURVE('',#2475,(#2480,#2487),.PCURVE_S1.);-#2475 = CIRCLE('',#2476,5.E-02);-#2476 = AXIS2_PLACEMENT_3D('',#2477,#2478,#2479);-#2477 = CARTESIAN_POINT('',(0.95,0.9,0.575));-#2478 = DIRECTION('',(-1.,0.,0.));-#2479 = DIRECTION('',(0.,0.,1.));-#2480 = PCURVE('',#1890,#2481);+#2468 = ORIENTED_EDGE('',*,*,#2317,.F.);+#2469 = ADVANCED_FACE('',(#2470),#1991,.T.);+#2470 = FACE_BOUND('',#2471,.T.);+#2471 = EDGE_LOOP('',(#2472,#2473,#2504,#2505));+#2472 = ORIENTED_EDGE('',*,*,#2125,.T.);+#2473 = ORIENTED_EDGE('',*,*,#2474,.T.);+#2474 = EDGE_CURVE('',#2105,#1971,#2475,.T.);+#2475 = SURFACE_CURVE('',#2476,(#2480,#2487),.PCURVE_S1.);+#2476 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2477,#2478,#2479),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2477 = CARTESIAN_POINT('',(0.95,1.24999955,-0.575));+#2478 = CARTESIAN_POINT('',(0.95,1.24999955,-0.625));+#2479 = CARTESIAN_POINT('',(0.95,1.1842101,-0.625));+#2480 = PCURVE('',#1991,#2481); #2481 = DEFINITIONAL_REPRESENTATION('',(#2482),#2486);-#2482 = LINE('',#2483,#2484);-#2483 = CARTESIAN_POINT('',(6.28318530718,0.95));-#2484 = VECTOR('',#2485,1.);-#2485 = DIRECTION('',(-1.,0.));+#2482 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2483,#2484,#2485),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2483 = CARTESIAN_POINT('',(4.712388980385,-0.95));+#2484 = CARTESIAN_POINT('',(5.497787143782,-0.95));+#2485 = CARTESIAN_POINT('',(6.28318530718,-0.95)); #2486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2487 = PCURVE('',#2488,#2493);-#2488 = SPHERICAL_SURFACE('',#2489,5.E-02);-#2489 = AXIS2_PLACEMENT_3D('',#2490,#2491,#2492);-#2490 = CARTESIAN_POINT('',(0.95,0.9,0.575));-#2491 = DIRECTION('',(0.,-1.,0.));-#2492 = DIRECTION('',(-1.,0.,0.));-#2493 = DEFINITIONAL_REPRESENTATION('',(#2494),#2520);-#2494 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2495,#2496,#2497,#2498,#2499,- #2500,#2501,#2502,#2503,#2504,#2505,#2506,#2507,#2508,#2509,#2510,- #2511,#2512,#2513,#2514,#2515,#2516,#2517,#2518,#2519),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (0.,7.139983303613E-02,0.142799666072,0.214199499108,0.285599332145,- 0.356999165181,0.428398998217,0.499798831253,0.571198664289,- 0.642598497325,0.713998330361,0.785398163397,0.856797996434,- 0.92819782947,0.999597662506,1.070997495542,1.142397328578,- 1.213797161614,1.28519699465,1.356596827687,1.427996660723,- 1.499396493759,1.570796326795),.UNSPECIFIED.);-#2495 = CARTESIAN_POINT('',(4.712388980385,0.));-#2496 = CARTESIAN_POINT('',(4.712388980385,-2.379994434538E-02));-#2497 = CARTESIAN_POINT('',(4.712388980385,-7.139983303613E-02));-#2498 = CARTESIAN_POINT('',(4.712388980385,-0.142799666072));-#2499 = CARTESIAN_POINT('',(4.712388980385,-0.214199499108));-#2500 = CARTESIAN_POINT('',(4.712388980385,-0.285599332145));-#2501 = CARTESIAN_POINT('',(4.712388980385,-0.356999165181));-#2502 = CARTESIAN_POINT('',(4.712388980385,-0.428398998217));-#2503 = CARTESIAN_POINT('',(4.712388980385,-0.499798831253));-#2504 = CARTESIAN_POINT('',(4.712388980385,-0.571198664289));-#2505 = CARTESIAN_POINT('',(4.712388980385,-0.642598497325));-#2506 = CARTESIAN_POINT('',(4.712388980385,-0.713998330361));-#2507 = CARTESIAN_POINT('',(4.712388980385,-0.785398163397));-#2508 = CARTESIAN_POINT('',(4.712388980385,-0.856797996434));-#2509 = CARTESIAN_POINT('',(4.712388980385,-0.92819782947));-#2510 = CARTESIAN_POINT('',(4.712388980385,-0.999597662506));-#2511 = CARTESIAN_POINT('',(4.712388980385,-1.070997495542));-#2512 = CARTESIAN_POINT('',(4.712388980385,-1.142397328578));-#2513 = CARTESIAN_POINT('',(4.712388980385,-1.213797161614));-#2514 = CARTESIAN_POINT('',(4.712388980385,-1.28519699465));-#2515 = CARTESIAN_POINT('',(4.712388980385,-1.356596827687));-#2516 = CARTESIAN_POINT('',(4.712388980385,-1.427996660723));-#2517 = CARTESIAN_POINT('',(4.712388980385,-1.499396493759));-#2518 = CARTESIAN_POINT('',(4.712388980385,-1.54699638245));-#2519 = CARTESIAN_POINT('',(4.712388980385,-1.570796326795));-#2520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2521 = ORIENTED_EDGE('',*,*,#2272,.T.);-#2522 = ORIENTED_EDGE('',*,*,#2523,.F.);-#2523 = EDGE_CURVE('',#1875,#2275,#2524,.T.);-#2524 = SURFACE_CURVE('',#2525,(#2530,#2537),.PCURVE_S1.);-#2525 = CIRCLE('',#2526,5.E-02);-#2526 = AXIS2_PLACEMENT_3D('',#2527,#2528,#2529);-#2527 = CARTESIAN_POINT('',(0.525,0.9,0.575));-#2528 = DIRECTION('',(-1.,0.,-1.734723475977E-16));-#2529 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#2530 = PCURVE('',#1890,#2531);-#2531 = DEFINITIONAL_REPRESENTATION('',(#2532),#2536);-#2532 = LINE('',#2533,#2534);-#2533 = CARTESIAN_POINT('',(6.28318530718,0.525));-#2534 = VECTOR('',#2535,1.);-#2535 = DIRECTION('',(-1.,0.));-#2536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2537 = PCURVE('',#2121,#2538);-#2538 = DEFINITIONAL_REPRESENTATION('',(#2539),#2543);-#2539 = LINE('',#2540,#2541);-#2540 = CARTESIAN_POINT('',(6.28318530718,6.28318530718));-#2541 = VECTOR('',#2542,1.);-#2542 = DIRECTION('',(-1.,0.));-#2543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2544 = ADVANCED_FACE('',(#2545),#1747,.T.);-#2545 = FACE_BOUND('',#2546,.T.);-#2546 = EDGE_LOOP('',(#2547,#2574,#2575,#2597));-#2547 = ORIENTED_EDGE('',*,*,#2548,.T.);-#2548 = EDGE_CURVE('',#1817,#1732,#2549,.T.);-#2549 = SURFACE_CURVE('',#2550,(#2555,#2562),.PCURVE_S1.);-#2550 = CIRCLE('',#2551,5.E-02);-#2551 = AXIS2_PLACEMENT_3D('',#2552,#2553,#2554);-#2552 = CARTESIAN_POINT('',(0.95,5.E-02,0.575));-#2553 = DIRECTION('',(0.,1.,0.));-#2554 = DIRECTION('',(0.,0.,-1.));-#2555 = PCURVE('',#1747,#2556);-#2556 = DEFINITIONAL_REPRESENTATION('',(#2557),#2561);-#2557 = LINE('',#2558,#2559);-#2558 = CARTESIAN_POINT('',(6.28318530718,0.9));-#2559 = VECTOR('',#2560,1.);-#2560 = DIRECTION('',(-1.,0.));-#2561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2562 = PCURVE('',#2563,#2568);-#2563 = SPHERICAL_SURFACE('',#2564,5.E-02);-#2564 = AXIS2_PLACEMENT_3D('',#2565,#2566,#2567);-#2565 = CARTESIAN_POINT('',(0.95,5.E-02,0.575));-#2566 = DIRECTION('',(0.,-1.,0.));-#2567 = DIRECTION('',(-1.,0.,0.));-#2568 = DEFINITIONAL_REPRESENTATION('',(#2569),#2573);-#2569 = LINE('',#2570,#2571);-#2570 = CARTESIAN_POINT('',(7.853981633974,-4.163336342344E-16));-#2571 = VECTOR('',#2572,1.);-#2572 = DIRECTION('',(-1.,0.));-#2573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2574 = ORIENTED_EDGE('',*,*,#1731,.T.);-#2575 = ORIENTED_EDGE('',*,*,#2576,.T.);-#2576 = EDGE_CURVE('',#1697,#1852,#2577,.T.);-#2577 = SURFACE_CURVE('',#2578,(#2583,#2590),.PCURVE_S1.);-#2578 = CIRCLE('',#2579,5.E-02);-#2579 = AXIS2_PLACEMENT_3D('',#2580,#2581,#2582);-#2580 = CARTESIAN_POINT('',(0.95,0.9,0.575));-#2581 = DIRECTION('',(0.,-1.,0.));-#2582 = DIRECTION('',(0.,0.,1.));-#2583 = PCURVE('',#1747,#2584);-#2584 = DEFINITIONAL_REPRESENTATION('',(#2585),#2589);-#2585 = LINE('',#2586,#2587);-#2586 = CARTESIAN_POINT('',(-3.14159265359,5.E-02));-#2587 = VECTOR('',#2588,1.);-#2588 = DIRECTION('',(1.,0.));-#2589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2590 = PCURVE('',#2488,#2591);-#2591 = DEFINITIONAL_REPRESENTATION('',(#2592),#2596);-#2592 = LINE('',#2593,#2594);-#2593 = CARTESIAN_POINT('',(-1.570796326795,0.));-#2594 = VECTOR('',#2595,1.);-#2595 = DIRECTION('',(1.,0.));-#2596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2597 = ORIENTED_EDGE('',*,*,#1851,.T.);-#2598 = ADVANCED_FACE('',(#2599),#1839,.T.);-#2599 = FACE_BOUND('',#2600,.T.);-#2600 = EDGE_LOOP('',(#2601,#2602,#2646,#2647));-#2601 = ORIENTED_EDGE('',*,*,#2425,.T.);-#2602 = ORIENTED_EDGE('',*,*,#2603,.T.);-#2603 = EDGE_CURVE('',#2403,#1817,#2604,.T.);-#2604 = SURFACE_CURVE('',#2605,(#2610,#2617),.PCURVE_S1.);-#2605 = CIRCLE('',#2606,5.E-02);-#2606 = AXIS2_PLACEMENT_3D('',#2607,#2608,#2609);-#2607 = CARTESIAN_POINT('',(0.95,5.E-02,0.575));-#2608 = DIRECTION('',(-1.,0.,0.));-#2609 = DIRECTION('',(0.,0.,1.));-#2610 = PCURVE('',#1839,#2611);-#2611 = DEFINITIONAL_REPRESENTATION('',(#2612),#2616);-#2612 = LINE('',#2613,#2614);-#2613 = CARTESIAN_POINT('',(-3.14159265359,5.E-02));-#2614 = VECTOR('',#2615,1.);-#2615 = DIRECTION('',(1.,0.));-#2616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2617 = PCURVE('',#2563,#2618);-#2618 = DEFINITIONAL_REPRESENTATION('',(#2619),#2645);-#2619 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2620,#2621,#2622,#2623,#2624,- #2625,#2626,#2627,#2628,#2629,#2630,#2631,#2632,#2633,#2634,#2635,- #2636,#2637,#2638,#2639,#2640,#2641,#2642,#2643,#2644),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (4.712388980385,4.783788813421,4.855188646457,4.926588479493,- 4.997988312529,5.069388145565,5.140787978601,5.212187811638,- 5.283587644674,5.35498747771,5.426387310746,5.497787143782,- 5.569186976818,5.640586809854,5.711986642891,5.783386475927,- 5.854786308963,5.926186141999,5.997585975035,6.068985808071,- 6.140385641107,6.211785474143,6.28318530718),.UNSPECIFIED.);-#2620 = CARTESIAN_POINT('',(4.712388980385,1.570796326795));-#2621 = CARTESIAN_POINT('',(4.712388980385,1.54699638245));-#2622 = CARTESIAN_POINT('',(4.712388980385,1.499396493759));-#2623 = CARTESIAN_POINT('',(4.712388980385,1.427996660723));-#2624 = CARTESIAN_POINT('',(4.712388980385,1.356596827687));-#2625 = CARTESIAN_POINT('',(4.712388980385,1.28519699465));-#2626 = CARTESIAN_POINT('',(4.712388980385,1.213797161614));-#2627 = CARTESIAN_POINT('',(4.712388980385,1.142397328578));-#2628 = CARTESIAN_POINT('',(4.712388980385,1.070997495542));-#2629 = CARTESIAN_POINT('',(4.712388980385,0.999597662506));-#2630 = CARTESIAN_POINT('',(4.712388980385,0.92819782947));-#2631 = CARTESIAN_POINT('',(4.712388980385,0.856797996434));-#2632 = CARTESIAN_POINT('',(4.712388980385,0.785398163397));-#2633 = CARTESIAN_POINT('',(4.712388980385,0.713998330361));-#2634 = CARTESIAN_POINT('',(4.712388980385,0.642598497325));-#2635 = CARTESIAN_POINT('',(4.712388980385,0.571198664289));-#2636 = CARTESIAN_POINT('',(4.712388980385,0.499798831253));-#2637 = CARTESIAN_POINT('',(4.712388980385,0.428398998217));-#2638 = CARTESIAN_POINT('',(4.712388980385,0.356999165181));-#2639 = CARTESIAN_POINT('',(4.712388980385,0.285599332145));-#2640 = CARTESIAN_POINT('',(4.712388980385,0.214199499108));-#2641 = CARTESIAN_POINT('',(4.712388980385,0.142799666072));-#2642 = CARTESIAN_POINT('',(4.712388980385,7.139983303613E-02));-#2643 = CARTESIAN_POINT('',(4.712388980385,2.379994434538E-02));-#2644 = CARTESIAN_POINT('',(4.712388980385,2.775557561563E-16));-#2645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2646 = ORIENTED_EDGE('',*,*,#1816,.T.);-#2647 = ORIENTED_EDGE('',*,*,#2648,.F.);-#2648 = EDGE_CURVE('',#2426,#1819,#2649,.T.);-#2649 = SURFACE_CURVE('',#2650,(#2655,#2662),.PCURVE_S1.);-#2650 = CIRCLE('',#2651,5.E-02);-#2651 = AXIS2_PLACEMENT_3D('',#2652,#2653,#2654);-#2652 = CARTESIAN_POINT('',(0.525,5.E-02,0.575));-#2653 = DIRECTION('',(-1.,0.,-1.734723475977E-16));-#2654 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#2655 = PCURVE('',#1839,#2656);+#2487 = PCURVE('',#2488,#2498);+#2488 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#2489,#2490,#2491)+ ,(#2492,#2493,#2494)+ ,(#2495,#2496,#2497+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 1.570796326795,3.14159265359),(-1.570796326795,0.),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2489 = CARTESIAN_POINT('',(0.95,1.24999955,-0.575));+#2490 = CARTESIAN_POINT('',(0.95,1.24999955,-0.625));+#2491 = CARTESIAN_POINT('',(0.95,1.1842101,-0.625));+#2492 = CARTESIAN_POINT('',(0.95,1.24999955,-0.575));+#2493 = CARTESIAN_POINT('',(1.,1.24999955,-0.625));+#2494 = CARTESIAN_POINT('',(1.,1.1842101,-0.625));+#2495 = CARTESIAN_POINT('',(0.95,1.24999955,-0.575));+#2496 = CARTESIAN_POINT('',(1.,1.24999955,-0.575));+#2497 = CARTESIAN_POINT('',(1.,1.1842101,-0.575));+#2498 = DEFINITIONAL_REPRESENTATION('',(#2499),#2503);+#2499 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2500,#2501,#2502),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2500 = CARTESIAN_POINT('',(1.570796326795,-1.570796326795));+#2501 = CARTESIAN_POINT('',(1.570796326795,-0.785398163397));+#2502 = CARTESIAN_POINT('',(1.570796326795,0.));+#2503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2504 = ORIENTED_EDGE('',*,*,#1970,.T.);+#2505 = ORIENTED_EDGE('',*,*,#2506,.F.);+#2506 = EDGE_CURVE('',#2126,#1973,#2507,.T.);+#2507 = SURFACE_CURVE('',#2508,(#2512,#2519),.PCURVE_S1.);+#2508 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2509,#2510,#2511),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2509 = CARTESIAN_POINT('',(0.525,1.24999955,-0.575));+#2510 = CARTESIAN_POINT('',(0.525,1.24999955,-0.625));+#2511 = CARTESIAN_POINT('',(0.525,1.1842101,-0.625));+#2512 = PCURVE('',#1991,#2513);+#2513 = DEFINITIONAL_REPRESENTATION('',(#2514),#2518);+#2514 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2515,#2516,#2517),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2515 = CARTESIAN_POINT('',(4.712388980385,-0.525));+#2516 = CARTESIAN_POINT('',(5.497787143782,-0.525));+#2517 = CARTESIAN_POINT('',(6.28318530718,-0.525));+#2518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2519 = PCURVE('',#1748,#2520);+#2520 = DEFINITIONAL_REPRESENTATION('',(#2521),#2525);+#2521 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2522,#2523,#2524),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2522 = CARTESIAN_POINT('',(4.712388980385,6.28318530718));+#2523 = CARTESIAN_POINT('',(3.926990816987,6.28318530718));+#2524 = CARTESIAN_POINT('',(3.14159265359,6.28318530718));+#2525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2526 = ADVANCED_FACE('',(#2527),#1513,.T.);+#2527 = FACE_BOUND('',#2528,.T.);+#2528 = EDGE_LOOP('',(#2529,#2530,#2531,#2552));+#2529 = ORIENTED_EDGE('',*,*,#2422,.F.);+#2530 = ORIENTED_EDGE('',*,*,#1492,.T.);+#2531 = ORIENTED_EDGE('',*,*,#2532,.T.);+#2532 = EDGE_CURVE('',#1495,#2105,#2533,.T.);+#2533 = SURFACE_CURVE('',#2534,(#2538,#2545),.PCURVE_S1.);+#2534 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2535,#2536,#2537),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2535 = CARTESIAN_POINT('',(1.,1.1842101,-0.575));+#2536 = CARTESIAN_POINT('',(1.,1.24999955,-0.575));+#2537 = CARTESIAN_POINT('',(0.95,1.24999955,-0.575));+#2538 = PCURVE('',#1513,#2539);+#2539 = DEFINITIONAL_REPRESENTATION('',(#2540),#2544);+#2540 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2541,#2542,#2543),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2541 = CARTESIAN_POINT('',(6.28318530718,0.575));+#2542 = CARTESIAN_POINT('',(5.497787143782,0.575));+#2543 = CARTESIAN_POINT('',(4.712388980385,0.575));+#2544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2545 = PCURVE('',#2488,#2546);+#2546 = DEFINITIONAL_REPRESENTATION('',(#2547),#2551);+#2547 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2548,#2549,#2550),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2548 = CARTESIAN_POINT('',(3.14159265359,0.));+#2549 = CARTESIAN_POINT('',(3.14159265359,-0.785398163397));+#2550 = CARTESIAN_POINT('',(3.14159265359,-1.570796326795));+#2551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2552 = ORIENTED_EDGE('',*,*,#2104,.T.);+#2553 = ADVANCED_FACE('',(#2554),#1569,.T.);+#2554 = FACE_BOUND('',#2555,.T.);+#2555 = EDGE_LOOP('',(#2556,#2557,#2558,#2589));+#2556 = ORIENTED_EDGE('',*,*,#2448,.F.);+#2557 = ORIENTED_EDGE('',*,*,#2196,.T.);+#2558 = ORIENTED_EDGE('',*,*,#2559,.T.);+#2559 = EDGE_CURVE('',#2169,#1556,#2560,.T.);+#2560 = SURFACE_CURVE('',#2561,(#2565,#2572),.PCURVE_S1.);+#2561 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2562,#2563,#2564),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2562 = CARTESIAN_POINT('',(0.95,-2.739036081278E-17,-0.575));+#2563 = CARTESIAN_POINT('',(1.,-4.565060135464E-17,-0.575));+#2564 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.575));+#2565 = PCURVE('',#1569,#2566);+#2566 = DEFINITIONAL_REPRESENTATION('',(#2567),#2571);+#2567 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2568,#2569,#2570),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#2568 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#2569 = CARTESIAN_POINT('',(2.356194490192,5.E-02));+#2570 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#2571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2572 = PCURVE('',#2573,#2583);+#2573 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,(+ (#2574,#2575,#2576)+ ,(#2577,#2578,#2579)+ ,(#2580,#2581,#2582+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(+ 1.570796326795,3.14159265359),(-5.551115123126E-16,1.570796326795),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,0.707106781187,1.)+ ,(0.707106781187,0.5,0.707106781187)+,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2574 = CARTESIAN_POINT('',(0.95,6.578945E-02,-0.625));+#2575 = CARTESIAN_POINT('',(0.95,1.826024054186E-17,-0.625));+#2576 = CARTESIAN_POINT('',(0.95,0.,-0.575));+#2577 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.625));+#2578 = CARTESIAN_POINT('',(1.,1.826024054186E-17,-0.625));+#2579 = CARTESIAN_POINT('',(0.95,0.,-0.575));+#2580 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.575));+#2581 = CARTESIAN_POINT('',(1.,1.826024054186E-17,-0.575));+#2582 = CARTESIAN_POINT('',(0.95,0.,-0.575));+#2583 = DEFINITIONAL_REPRESENTATION('',(#2584),#2588);+#2584 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2585,#2586,#2587),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#2585 = CARTESIAN_POINT('',(3.14159265359,1.570796326795));+#2586 = CARTESIAN_POINT('',(3.14159265359,0.785398163397));+#2587 = CARTESIAN_POINT('',(3.14159265359,2.775557561563E-16));+#2588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2589 = ORIENTED_EDGE('',*,*,#1555,.T.);+#2590 = ADVANCED_FACE('',(#2591),#2040,.T.);+#2591 = FACE_BOUND('',#2592,.T.);+#2592 = EDGE_LOOP('',(#2593,#2594,#2615,#2616));+#2593 = ORIENTED_EDGE('',*,*,#2026,.T.);+#2594 = ORIENTED_EDGE('',*,*,#2595,.T.);+#2595 = EDGE_CURVE('',#2006,#2169,#2596,.T.);+#2596 = SURFACE_CURVE('',#2597,(#2601,#2608),.PCURVE_S1.);+#2597 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2598,#2599,#2600),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2598 = CARTESIAN_POINT('',(0.95,6.578945E-02,-0.625));+#2599 = CARTESIAN_POINT('',(0.95,1.826024054186E-17,-0.625));+#2600 = CARTESIAN_POINT('',(0.95,0.,-0.575));+#2601 = PCURVE('',#2040,#2602);+#2602 = DEFINITIONAL_REPRESENTATION('',(#2603),#2607);+#2603 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2604,#2605,#2606),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#2604 = CARTESIAN_POINT('',(3.14159265359,-5.E-02));+#2605 = CARTESIAN_POINT('',(2.356194490192,-5.E-02));+#2606 = CARTESIAN_POINT('',(1.570796326795,-5.E-02));+#2607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2608 = PCURVE('',#2573,#2609);+#2609 = DEFINITIONAL_REPRESENTATION('',(#2610),#2614);+#2610 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2611,#2612,#2613),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#2611 = CARTESIAN_POINT('',(1.570796326795,-5.551115123126E-16));+#2612 = CARTESIAN_POINT('',(1.570796326795,0.785398163397));+#2613 = CARTESIAN_POINT('',(1.570796326795,1.570796326795));+#2614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2615 = ORIENTED_EDGE('',*,*,#2168,.T.);+#2616 = ORIENTED_EDGE('',*,*,#2617,.F.);+#2617 = EDGE_CURVE('',#2027,#2171,#2618,.T.);+#2618 = SURFACE_CURVE('',#2619,(#2623,#2630),.PCURVE_S1.);+#2619 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2620,#2621,#2622),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2620 = CARTESIAN_POINT('',(0.525,6.578945E-02,-0.625));+#2621 = CARTESIAN_POINT('',(0.525,1.826024054186E-17,-0.625));+#2622 = CARTESIAN_POINT('',(0.525,0.,-0.575));+#2623 = PCURVE('',#2040,#2624);+#2624 = DEFINITIONAL_REPRESENTATION('',(#2625),#2629);+#2625 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2626,#2627,#2628),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#2626 = CARTESIAN_POINT('',(3.14159265359,-0.475));+#2627 = CARTESIAN_POINT('',(2.356194490192,-0.475));+#2628 = CARTESIAN_POINT('',(1.570796326795,-0.475));+#2629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2630 = PCURVE('',#1809,#2631);+#2631 = DEFINITIONAL_REPRESENTATION('',(#2632),#2636);+#2632 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2633,#2634,#2635),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#2633 = CARTESIAN_POINT('',(3.14159265359,6.28318530718));+#2634 = CARTESIAN_POINT('',(2.356194490192,6.28318530718));+#2635 = CARTESIAN_POINT('',(1.570796326795,6.28318530718));+#2636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2637 = ADVANCED_FACE('',(#2638),#2488,.T.);+#2638 = FACE_BOUND('',#2639,.T.);+#2639 = EDGE_LOOP('',(#2640,#2641,#2662));+#2640 = ORIENTED_EDGE('',*,*,#2532,.F.);+#2641 = ORIENTED_EDGE('',*,*,#2642,.T.);+#2642 = EDGE_CURVE('',#1495,#1971,#2643,.T.);+#2643 = SURFACE_CURVE('',#2644,(#2648,#2655),.PCURVE_S1.);+#2644 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2645,#2646,#2647),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2645 = CARTESIAN_POINT('',(1.,1.1842101,-0.575));+#2646 = CARTESIAN_POINT('',(1.,1.1842101,-0.625));+#2647 = CARTESIAN_POINT('',(0.95,1.1842101,-0.625));+#2648 = PCURVE('',#2488,#2649);+#2649 = DEFINITIONAL_REPRESENTATION('',(#2650),#2654);+#2650 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2651,#2652,#2653),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2651 = CARTESIAN_POINT('',(3.14159265359,0.));+#2652 = CARTESIAN_POINT('',(2.356194490192,0.));+#2653 = CARTESIAN_POINT('',(1.570796326795,0.));+#2654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2655 = PCURVE('',#1595,#2656); #2656 = DEFINITIONAL_REPRESENTATION('',(#2657),#2661);-#2657 = LINE('',#2658,#2659);-#2658 = CARTESIAN_POINT('',(-3.14159265359,0.475));-#2659 = VECTOR('',#2660,1.);-#2660 = DIRECTION('',(1.,0.));+#2657 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2658,#2659,#2660),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2658 = CARTESIAN_POINT('',(1.570796326795,5.E-02));+#2659 = CARTESIAN_POINT('',(0.785398163397,5.E-02));+#2660 = CARTESIAN_POINT('',(0.,5.E-02)); #2661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2662 = PCURVE('',#2069,#2663);-#2663 = DEFINITIONAL_REPRESENTATION('',(#2664),#2668);-#2664 = LINE('',#2665,#2666);-#2665 = CARTESIAN_POINT('',(6.28318530718,6.28318530718));-#2666 = VECTOR('',#2667,1.);-#2667 = DIRECTION('',(-1.,0.));-#2668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2669 = ADVANCED_FACE('',(#2670),#2488,.T.);-#2670 = FACE_BOUND('',#2671,.T.);-#2671 = EDGE_LOOP('',(#2672,#2673,#2717));-#2672 = ORIENTED_EDGE('',*,*,#2576,.F.);-#2673 = ORIENTED_EDGE('',*,*,#2674,.T.);-#2674 = EDGE_CURVE('',#1697,#2273,#2675,.T.);-#2675 = SURFACE_CURVE('',#2676,(#2681,#2710),.PCURVE_S1.);-#2676 = CIRCLE('',#2677,5.E-02);-#2677 = AXIS2_PLACEMENT_3D('',#2678,#2679,#2680);-#2678 = CARTESIAN_POINT('',(0.95,0.9,0.575));-#2679 = DIRECTION('',(0.,0.,1.));-#2680 = DIRECTION('',(-1.,0.,0.));-#2681 = PCURVE('',#2488,#2682);-#2682 = DEFINITIONAL_REPRESENTATION('',(#2683),#2709);-#2683 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2684,#2685,#2686,#2687,#2688,- #2689,#2690,#2691,#2692,#2693,#2694,#2695,#2696,#2697,#2698,#2699,- #2700,#2701,#2702,#2703,#2704,#2705,#2706,#2707,#2708),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (3.14159265359,3.212992486626,3.284392319662,3.355792152698,- 3.427191985734,3.49859181877,3.569991651807,3.641391484843,- 3.712791317879,3.784191150915,3.855590983951,3.926990816987,- 3.998390650023,4.06979048306,4.141190316096,4.212590149132,- 4.283989982168,4.355389815204,4.42678964824,4.498189481276,- 4.569589314312,4.640989147349,4.712388980385),.UNSPECIFIED.);-#2684 = CARTESIAN_POINT('',(3.14159265359,0.));-#2685 = CARTESIAN_POINT('',(3.14159265359,-2.379994434538E-02));-#2686 = CARTESIAN_POINT('',(3.14159265359,-7.139983303613E-02));-#2687 = CARTESIAN_POINT('',(3.14159265359,-0.142799666072));-#2688 = CARTESIAN_POINT('',(3.14159265359,-0.214199499108));-#2689 = CARTESIAN_POINT('',(3.14159265359,-0.285599332145));-#2690 = CARTESIAN_POINT('',(3.14159265359,-0.356999165181));-#2691 = CARTESIAN_POINT('',(3.14159265359,-0.428398998217));-#2692 = CARTESIAN_POINT('',(3.14159265359,-0.499798831253));-#2693 = CARTESIAN_POINT('',(3.14159265359,-0.571198664289));-#2694 = CARTESIAN_POINT('',(3.14159265359,-0.642598497325));-#2695 = CARTESIAN_POINT('',(3.14159265359,-0.713998330361));-#2696 = CARTESIAN_POINT('',(3.14159265359,-0.785398163397));-#2697 = CARTESIAN_POINT('',(3.14159265359,-0.856797996434));-#2698 = CARTESIAN_POINT('',(3.14159265359,-0.92819782947));-#2699 = CARTESIAN_POINT('',(3.14159265359,-0.999597662506));-#2700 = CARTESIAN_POINT('',(3.14159265359,-1.070997495542));-#2701 = CARTESIAN_POINT('',(3.14159265359,-1.142397328578));-#2702 = CARTESIAN_POINT('',(3.14159265359,-1.213797161614));-#2703 = CARTESIAN_POINT('',(3.14159265359,-1.28519699465));-#2704 = CARTESIAN_POINT('',(3.14159265359,-1.356596827687));-#2705 = CARTESIAN_POINT('',(3.14159265359,-1.427996660723));-#2706 = CARTESIAN_POINT('',(3.14159265359,-1.499396493759));-#2707 = CARTESIAN_POINT('',(3.14159265359,-1.54699638245));-#2708 = CARTESIAN_POINT('',(3.14159265359,-1.570796326795));-#2709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2710 = PCURVE('',#1719,#2711);-#2711 = DEFINITIONAL_REPRESENTATION('',(#2712),#2716);-#2712 = LINE('',#2713,#2714);-#2713 = CARTESIAN_POINT('',(9.424777960769,-0.575));-#2714 = VECTOR('',#2715,1.);-#2715 = DIRECTION('',(-1.,-7.067899292141E-17));-#2716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2717 = ORIENTED_EDGE('',*,*,#2473,.F.);-#2718 = ADVANCED_FACE('',(#2719),#2563,.T.);-#2719 = FACE_BOUND('',#2720,.T.);-#2720 = EDGE_LOOP('',(#2721,#2722,#2766));-#2721 = ORIENTED_EDGE('',*,*,#2603,.F.);-#2722 = ORIENTED_EDGE('',*,*,#2723,.T.);-#2723 = EDGE_CURVE('',#2403,#1732,#2724,.T.);-#2724 = SURFACE_CURVE('',#2725,(#2730,#2759),.PCURVE_S1.);-#2725 = CIRCLE('',#2726,5.E-02);-#2726 = AXIS2_PLACEMENT_3D('',#2727,#2728,#2729);-#2727 = CARTESIAN_POINT('',(0.95,5.E-02,0.575));-#2728 = DIRECTION('',(0.,0.,1.));-#2729 = DIRECTION('',(-1.,0.,0.));-#2730 = PCURVE('',#2563,#2731);-#2731 = DEFINITIONAL_REPRESENTATION('',(#2732),#2758);-#2732 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2733,#2734,#2735,#2736,#2737,- #2738,#2739,#2740,#2741,#2742,#2743,#2744,#2745,#2746,#2747,#2748,- #2749,#2750,#2751,#2752,#2753,#2754,#2755,#2756,#2757),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (1.570796326795,1.642196159831,1.713595992867,1.784995825903,- 1.856395658939,1.927795491976,1.999195325012,2.070595158048,- 2.141994991084,2.21339482412,2.284794657156,2.356194490192,- 2.427594323228,2.498994156265,2.570393989301,2.641793822337,- 2.713193655373,2.784593488409,2.855993321445,2.927393154481,- 2.998792987518,3.070192820554,3.14159265359),.UNSPECIFIED.);-#2733 = CARTESIAN_POINT('',(3.14159265359,1.570796326795));-#2734 = CARTESIAN_POINT('',(3.14159265359,1.54699638245));-#2735 = CARTESIAN_POINT('',(3.14159265359,1.499396493759));-#2736 = CARTESIAN_POINT('',(3.14159265359,1.427996660723));-#2737 = CARTESIAN_POINT('',(3.14159265359,1.356596827687));-#2738 = CARTESIAN_POINT('',(3.14159265359,1.28519699465));-#2739 = CARTESIAN_POINT('',(3.14159265359,1.213797161614));-#2740 = CARTESIAN_POINT('',(3.14159265359,1.142397328578));-#2741 = CARTESIAN_POINT('',(3.14159265359,1.070997495542));-#2742 = CARTESIAN_POINT('',(3.14159265359,0.999597662506));-#2743 = CARTESIAN_POINT('',(3.14159265359,0.92819782947));-#2744 = CARTESIAN_POINT('',(3.14159265359,0.856797996434));-#2745 = CARTESIAN_POINT('',(3.14159265359,0.785398163397));-#2746 = CARTESIAN_POINT('',(3.14159265359,0.713998330361));-#2747 = CARTESIAN_POINT('',(3.14159265359,0.642598497325));-#2748 = CARTESIAN_POINT('',(3.14159265359,0.571198664289));-#2749 = CARTESIAN_POINT('',(3.14159265359,0.499798831253));-#2750 = CARTESIAN_POINT('',(3.14159265359,0.428398998217));-#2751 = CARTESIAN_POINT('',(3.14159265359,0.356999165181));-#2752 = CARTESIAN_POINT('',(3.14159265359,0.285599332145));-#2753 = CARTESIAN_POINT('',(3.14159265359,0.214199499108));-#2754 = CARTESIAN_POINT('',(3.14159265359,0.142799666072));-#2755 = CARTESIAN_POINT('',(3.14159265359,7.139983303613E-02));-#2756 = CARTESIAN_POINT('',(3.14159265359,2.379994434538E-02));-#2757 = CARTESIAN_POINT('',(3.14159265359,-2.775557561563E-16));-#2758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2759 = PCURVE('',#1775,#2760);-#2760 = DEFINITIONAL_REPRESENTATION('',(#2761),#2765);-#2761 = LINE('',#2762,#2763);-#2762 = CARTESIAN_POINT('',(0.,1.2));-#2763 = VECTOR('',#2764,1.);-#2764 = DIRECTION('',(1.,0.));-#2765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2766 = ORIENTED_EDGE('',*,*,#2548,.F.);-#2767 = ADVANCED_FACE('',(#2768),#2185,.T.);-#2768 = FACE_BOUND('',#2769,.T.);-#2769 = EDGE_LOOP('',(#2770,#2771,#2820,#2821));-#2770 = ORIENTED_EDGE('',*,*,#2325,.T.);-#2771 = ORIENTED_EDGE('',*,*,#2772,.T.);-#2772 = EDGE_CURVE('',#2303,#2163,#2773,.T.);-#2773 = SURFACE_CURVE('',#2774,(#2779,#2786),.PCURVE_S1.);-#2774 = CIRCLE('',#2775,5.E-02);-#2775 = AXIS2_PLACEMENT_3D('',#2776,#2777,#2778);-#2776 = CARTESIAN_POINT('',(0.95,0.9,-0.575));-#2777 = DIRECTION('',(-1.,0.,0.));-#2778 = DIRECTION('',(0.,0.,1.));-#2779 = PCURVE('',#2185,#2780);-#2780 = DEFINITIONAL_REPRESENTATION('',(#2781),#2785);-#2781 = LINE('',#2782,#2783);-#2782 = CARTESIAN_POINT('',(3.14159265359,-0.95));-#2783 = VECTOR('',#2784,1.);-#2784 = DIRECTION('',(1.,0.));-#2785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2786 = PCURVE('',#2787,#2792);-#2787 = SPHERICAL_SURFACE('',#2788,5.E-02);-#2788 = AXIS2_PLACEMENT_3D('',#2789,#2790,#2791);-#2789 = CARTESIAN_POINT('',(0.95,0.9,-0.575));-#2790 = DIRECTION('',(0.,-1.,0.));-#2791 = DIRECTION('',(-1.,0.,0.));-#2792 = DEFINITIONAL_REPRESENTATION('',(#2793),#2819);-#2793 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2794,#2795,#2796,#2797,#2798,- #2799,#2800,#2801,#2802,#2803,#2804,#2805,#2806,#2807,#2808,#2809,- #2810,#2811,#2812,#2813,#2814,#2815,#2816,#2817,#2818),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (1.570796326795,1.642196159831,1.713595992867,1.784995825903,- 1.856395658939,1.927795491976,1.999195325012,2.070595158048,- 2.141994991084,2.21339482412,2.284794657156,2.356194490192,- 2.427594323228,2.498994156265,2.570393989301,2.641793822337,- 2.713193655373,2.784593488409,2.855993321445,2.927393154481,- 2.998792987518,3.070192820554,3.14159265359),.UNSPECIFIED.);-#2794 = CARTESIAN_POINT('',(1.570796326795,-1.570796326795));-#2795 = CARTESIAN_POINT('',(1.570796326795,-1.54699638245));-#2796 = CARTESIAN_POINT('',(1.570796326795,-1.499396493759));-#2797 = CARTESIAN_POINT('',(1.570796326795,-1.427996660723));-#2798 = CARTESIAN_POINT('',(1.570796326795,-1.356596827686));-#2799 = CARTESIAN_POINT('',(1.570796326795,-1.28519699465));-#2800 = CARTESIAN_POINT('',(1.570796326795,-1.213797161614));-#2801 = CARTESIAN_POINT('',(1.570796326795,-1.142397328578));-#2802 = CARTESIAN_POINT('',(1.570796326795,-1.070997495542));-#2803 = CARTESIAN_POINT('',(1.570796326795,-0.999597662506));-#2804 = CARTESIAN_POINT('',(1.570796326795,-0.92819782947));-#2805 = CARTESIAN_POINT('',(1.570796326795,-0.856797996434));-#2806 = CARTESIAN_POINT('',(1.570796326795,-0.785398163397));-#2807 = CARTESIAN_POINT('',(1.570796326795,-0.713998330361));-#2808 = CARTESIAN_POINT('',(1.570796326795,-0.642598497325));-#2809 = CARTESIAN_POINT('',(1.570796326795,-0.571198664289));-#2810 = CARTESIAN_POINT('',(1.570796326795,-0.499798831253));-#2811 = CARTESIAN_POINT('',(1.570796326795,-0.428398998217));-#2812 = CARTESIAN_POINT('',(1.570796326795,-0.356999165181));-#2813 = CARTESIAN_POINT('',(1.570796326795,-0.285599332145));-#2814 = CARTESIAN_POINT('',(1.570796326795,-0.214199499108));-#2815 = CARTESIAN_POINT('',(1.570796326795,-0.142799666072));-#2816 = CARTESIAN_POINT('',(1.570796326795,-7.139983303613E-02));-#2817 = CARTESIAN_POINT('',(1.570796326795,-2.379994434538E-02));-#2818 = CARTESIAN_POINT('',(1.570796326795,0.));-#2819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2820 = ORIENTED_EDGE('',*,*,#2162,.T.);-#2821 = ORIENTED_EDGE('',*,*,#2822,.F.);-#2822 = EDGE_CURVE('',#2326,#2165,#2823,.T.);-#2823 = SURFACE_CURVE('',#2824,(#2829,#2836),.PCURVE_S1.);-#2824 = CIRCLE('',#2825,5.E-02);-#2825 = AXIS2_PLACEMENT_3D('',#2826,#2827,#2828);-#2826 = CARTESIAN_POINT('',(0.525,0.9,-0.575));-#2827 = DIRECTION('',(-1.,0.,-1.734723475977E-16));-#2828 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#2829 = PCURVE('',#2185,#2830);-#2830 = DEFINITIONAL_REPRESENTATION('',(#2831),#2835);-#2831 = LINE('',#2832,#2833);-#2832 = CARTESIAN_POINT('',(3.14159265359,-0.525));-#2833 = VECTOR('',#2834,1.);-#2834 = DIRECTION('',(1.,0.));-#2835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2836 = PCURVE('',#1955,#2837);+#2662 = ORIENTED_EDGE('',*,*,#2474,.F.);+#2663 = ADVANCED_FACE('',(#2664),#2573,.T.);+#2664 = FACE_BOUND('',#2665,.T.);+#2665 = EDGE_LOOP('',(#2666,#2667,#2688));+#2666 = ORIENTED_EDGE('',*,*,#2595,.F.);+#2667 = ORIENTED_EDGE('',*,*,#2668,.T.);+#2668 = EDGE_CURVE('',#2006,#1556,#2669,.T.);+#2669 = SURFACE_CURVE('',#2670,(#2674,#2681),.PCURVE_S1.);+#2670 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2671,#2672,#2673),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2671 = CARTESIAN_POINT('',(0.95,6.578945E-02,-0.625));+#2672 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.625));+#2673 = CARTESIAN_POINT('',(1.,6.578945E-02,-0.575));+#2674 = PCURVE('',#2573,#2675);+#2675 = DEFINITIONAL_REPRESENTATION('',(#2676),#2680);+#2676 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2677,#2678,#2679),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2677 = CARTESIAN_POINT('',(1.570796326795,-4.163336342344E-16));+#2678 = CARTESIAN_POINT('',(2.356194490192,-4.163336342344E-16));+#2679 = CARTESIAN_POINT('',(3.14159265359,-4.163336342344E-16));+#2680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2681 = PCURVE('',#1595,#2682);+#2682 = DEFINITIONAL_REPRESENTATION('',(#2683),#2687);+#2683 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2684,#2685,#2686),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2684 = CARTESIAN_POINT('',(0.,0.9));+#2685 = CARTESIAN_POINT('',(0.785398163397,0.9));+#2686 = CARTESIAN_POINT('',(1.570796326795,0.9));+#2687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2688 = ORIENTED_EDGE('',*,*,#2559,.F.);+#2689 = ADVANCED_FACE('',(#2690),#1595,.T.);+#2690 = FACE_BOUND('',#2691,.T.);+#2691 = EDGE_LOOP('',(#2692,#2693,#2694,#2695));+#2692 = ORIENTED_EDGE('',*,*,#2642,.F.);+#2693 = ORIENTED_EDGE('',*,*,#1583,.T.);+#2694 = ORIENTED_EDGE('',*,*,#2668,.F.);+#2695 = ORIENTED_EDGE('',*,*,#2005,.T.);+#2696 = ADVANCED_FACE('',(#2697),#1840,.T.);+#2697 = FACE_BOUND('',#2698,.T.);+#2698 = EDGE_LOOP('',(#2699,#2720,#2721,#2742));+#2699 = ORIENTED_EDGE('',*,*,#2700,.T.);+#2700 = EDGE_CURVE('',#1794,#2171,#2701,.T.);+#2701 = SURFACE_CURVE('',#2702,(#2706,#2713),.PCURVE_S1.);+#2702 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2703,#2704,#2705),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2703 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.575));+#2704 = CARTESIAN_POINT('',(0.5,9.130120270928E-18,-0.575));+#2705 = CARTESIAN_POINT('',(0.525,0.,-0.575));+#2706 = PCURVE('',#1840,#2707);+#2707 = DEFINITIONAL_REPRESENTATION('',(#2708),#2712);+#2708 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2709,#2710,#2711),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#2709 = CARTESIAN_POINT('',(3.14159265359,-5.E-02));+#2710 = CARTESIAN_POINT('',(2.356194490192,-5.E-02));+#2711 = CARTESIAN_POINT('',(1.570796326795,-5.E-02));+#2712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2713 = PCURVE('',#1809,#2714);+#2714 = DEFINITIONAL_REPRESENTATION('',(#2715),#2719);+#2715 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2716,#2717,#2718),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#2716 = CARTESIAN_POINT('',(1.570796326795,4.712388980385));+#2717 = CARTESIAN_POINT('',(1.570796326795,5.497787143782));+#2718 = CARTESIAN_POINT('',(1.570796326795,6.28318530718));+#2719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2720 = ORIENTED_EDGE('',*,*,#2238,.T.);+#2721 = ORIENTED_EDGE('',*,*,#2722,.T.);+#2722 = EDGE_CURVE('',#2218,#1827,#2723,.T.);+#2723 = SURFACE_CURVE('',#2724,(#2728,#2735),.PCURVE_S1.);+#2724 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2725,#2726,#2727),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2725 = CARTESIAN_POINT('',(0.525,5.934578176103E-17,0.575));+#2726 = CARTESIAN_POINT('',(0.5,5.021566149011E-17,0.575));+#2727 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.575));+#2728 = PCURVE('',#1840,#2729);+#2729 = DEFINITIONAL_REPRESENTATION('',(#2730),#2734);+#2730 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2731,#2732,#2733),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#2731 = CARTESIAN_POINT('',(1.570796326795,-1.2));+#2732 = CARTESIAN_POINT('',(2.356194490192,-1.2));+#2733 = CARTESIAN_POINT('',(3.14159265359,-1.2));+#2734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2735 = PCURVE('',#1870,#2736);+#2736 = DEFINITIONAL_REPRESENTATION('',(#2737),#2741);+#2737 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2738,#2739,#2740),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#2738 = CARTESIAN_POINT('',(1.570796326795,6.28318530718));+#2739 = CARTESIAN_POINT('',(1.570796326795,5.497787143782));+#2740 = CARTESIAN_POINT('',(1.570796326795,4.712388980385));+#2741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2742 = ORIENTED_EDGE('',*,*,#1826,.T.);+#2743 = ADVANCED_FACE('',(#2744),#1870,.T.);+#2744 = FACE_BOUND('',#2745,.T.);+#2745 = EDGE_LOOP('',(#2746,#2747,#2748,#2769));+#2746 = ORIENTED_EDGE('',*,*,#2722,.F.);+#2747 = ORIENTED_EDGE('',*,*,#2397,.T.);+#2748 = ORIENTED_EDGE('',*,*,#2749,.T.);+#2749 = EDGE_CURVE('',#1615,#1855,#2750,.T.);+#2750 = SURFACE_CURVE('',#2751,(#2755,#2762),.PCURVE_S1.);+#2751 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2752,#2753,#2754),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2752 = CARTESIAN_POINT('',(0.525,6.578945E-02,0.625));+#2753 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.625));+#2754 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.6));+#2755 = PCURVE('',#1870,#2756);+#2756 = DEFINITIONAL_REPRESENTATION('',(#2757),#2761);+#2757 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2758,#2759,#2760),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2758 = CARTESIAN_POINT('',(0.,6.28318530718));+#2759 = CARTESIAN_POINT('',(0.,5.497787143782));+#2760 = CARTESIAN_POINT('',(0.,4.712388980385));+#2761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2762 = PCURVE('',#1708,#2763);+#2763 = DEFINITIONAL_REPRESENTATION('',(#2764),#2768);+#2764 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2765,#2766,#2767),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2765 = CARTESIAN_POINT('',(3.14159265359,0.9));+#2766 = CARTESIAN_POINT('',(3.926990816987,0.9));+#2767 = CARTESIAN_POINT('',(4.712388980385,0.9));+#2768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2769 = ORIENTED_EDGE('',*,*,#1854,.T.);+#2770 = ADVANCED_FACE('',(#2771),#1809,.T.);+#2771 = FACE_BOUND('',#2772,.T.);+#2772 = EDGE_LOOP('',(#2773,#2774,#2775,#2796));+#2773 = ORIENTED_EDGE('',*,*,#2700,.F.);+#2774 = ORIENTED_EDGE('',*,*,#1793,.T.);+#2775 = ORIENTED_EDGE('',*,*,#2776,.T.);+#2776 = EDGE_CURVE('',#1766,#2027,#2777,.T.);+#2777 = SURFACE_CURVE('',#2778,(#2782,#2789),.PCURVE_S1.);+#2778 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2779,#2780,#2781),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2779 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.6));+#2780 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.625));+#2781 = CARTESIAN_POINT('',(0.525,6.578945E-02,-0.625));+#2782 = PCURVE('',#1809,#2783);+#2783 = DEFINITIONAL_REPRESENTATION('',(#2784),#2788);+#2784 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2785,#2786,#2787),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2785 = CARTESIAN_POINT('',(3.14159265359,4.712388980385));+#2786 = CARTESIAN_POINT('',(3.14159265359,5.497787143782));+#2787 = CARTESIAN_POINT('',(3.14159265359,6.28318530718));+#2788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2789 = PCURVE('',#1779,#2790);+#2790 = DEFINITIONAL_REPRESENTATION('',(#2791),#2795);+#2791 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2792,#2793,#2794),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2792 = CARTESIAN_POINT('',(4.712388980385,0.9));+#2793 = CARTESIAN_POINT('',(5.497787143782,0.9));+#2794 = CARTESIAN_POINT('',(6.28318530718,0.9));+#2795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2796 = ORIENTED_EDGE('',*,*,#2617,.T.);+#2797 = ADVANCED_FACE('',(#2798),#1708,.T.);+#2798 = FACE_BOUND('',#2799,.T.);+#2799 = EDGE_LOOP('',(#2800,#2801,#2802,#2823));+#2800 = ORIENTED_EDGE('',*,*,#2749,.F.);+#2801 = ORIENTED_EDGE('',*,*,#1696,.T.);+#2802 = ORIENTED_EDGE('',*,*,#2803,.T.);+#2803 = EDGE_CURVE('',#1669,#1888,#2804,.T.);+#2804 = SURFACE_CURVE('',#2805,(#2809,#2816),.PCURVE_S1.);+#2805 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2806,#2807,#2808),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2806 = CARTESIAN_POINT('',(0.525,1.1842101,0.625));+#2807 = CARTESIAN_POINT('',(0.5,1.1842101,0.625));+#2808 = CARTESIAN_POINT('',(0.5,1.1842101,0.6));+#2809 = PCURVE('',#1708,#2810);+#2810 = DEFINITIONAL_REPRESENTATION('',(#2811),#2815);+#2811 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2812,#2813,#2814),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2812 = CARTESIAN_POINT('',(3.14159265359,5.E-02));+#2813 = CARTESIAN_POINT('',(3.926990816987,5.E-02));+#2814 = CARTESIAN_POINT('',(4.712388980385,5.E-02));+#2815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2816 = PCURVE('',#1924,#2817);+#2817 = DEFINITIONAL_REPRESENTATION('',(#2818),#2822);+#2818 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2819,#2820,#2821),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2819 = CARTESIAN_POINT('',(6.28318530718,6.28318530718));+#2820 = CARTESIAN_POINT('',(6.28318530718,5.497787143782));+#2821 = CARTESIAN_POINT('',(6.28318530718,4.712388980385));+#2822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2823 = ORIENTED_EDGE('',*,*,#1887,.T.);+#2824 = ADVANCED_FACE('',(#2825),#1779,.T.);+#2825 = FACE_BOUND('',#2826,.T.);+#2826 = EDGE_LOOP('',(#2827,#2828,#2829,#2850));+#2827 = ORIENTED_EDGE('',*,*,#2776,.F.);+#2828 = ORIENTED_EDGE('',*,*,#1765,.T.);+#2829 = ORIENTED_EDGE('',*,*,#2830,.T.);+#2830 = EDGE_CURVE('',#1726,#1973,#2831,.T.);+#2831 = SURFACE_CURVE('',#2832,(#2836,#2843),.PCURVE_S1.);+#2832 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2833,#2834,#2835),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2833 = CARTESIAN_POINT('',(0.5,1.1842101,-0.6));+#2834 = CARTESIAN_POINT('',(0.5,1.1842101,-0.625));+#2835 = CARTESIAN_POINT('',(0.525,1.1842101,-0.625));+#2836 = PCURVE('',#1779,#2837); #2837 = DEFINITIONAL_REPRESENTATION('',(#2838),#2842);-#2838 = LINE('',#2839,#2840);-#2839 = CARTESIAN_POINT('',(6.28318530718,6.28318530718));-#2840 = VECTOR('',#2841,1.);-#2841 = DIRECTION('',(-1.,0.));+#2838 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2839,#2840,#2841),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2839 = CARTESIAN_POINT('',(4.712388980385,5.E-02));+#2840 = CARTESIAN_POINT('',(5.497787143782,5.E-02));+#2841 = CARTESIAN_POINT('',(6.28318530718,5.E-02)); #2842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2843 = ADVANCED_FACE('',(#2844),#1719,.T.);-#2844 = FACE_BOUND('',#2845,.T.);-#2845 = EDGE_LOOP('',(#2846,#2847,#2848,#2892));-#2846 = ORIENTED_EDGE('',*,*,#2674,.F.);-#2847 = ORIENTED_EDGE('',*,*,#1696,.T.);-#2848 = ORIENTED_EDGE('',*,*,#2849,.T.);-#2849 = EDGE_CURVE('',#1699,#2303,#2850,.T.);-#2850 = SURFACE_CURVE('',#2851,(#2856,#2863),.PCURVE_S1.);-#2851 = CIRCLE('',#2852,5.E-02);-#2852 = AXIS2_PLACEMENT_3D('',#2853,#2854,#2855);-#2853 = CARTESIAN_POINT('',(0.95,0.9,-0.575));-#2854 = DIRECTION('',(0.,-0.,1.));-#2855 = DIRECTION('',(1.,0.,0.));-#2856 = PCURVE('',#1719,#2857);-#2857 = DEFINITIONAL_REPRESENTATION('',(#2858),#2862);-#2858 = LINE('',#2859,#2860);-#2859 = CARTESIAN_POINT('',(6.28318530718,0.575));-#2860 = VECTOR('',#2861,1.);-#2861 = DIRECTION('',(-1.,-7.067899292141E-17));-#2862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2863 = PCURVE('',#2787,#2864);-#2864 = DEFINITIONAL_REPRESENTATION('',(#2865),#2891);-#2865 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2866,#2867,#2868,#2869,#2870,- #2871,#2872,#2873,#2874,#2875,#2876,#2877,#2878,#2879,#2880,#2881,- #2882,#2883,#2884,#2885,#2886,#2887,#2888,#2889,#2890),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (0.,7.139983303613E-02,0.142799666072,0.214199499108,0.285599332145,- 0.356999165181,0.428398998217,0.499798831253,0.571198664289,- 0.642598497325,0.713998330361,0.785398163397,0.856797996434,- 0.92819782947,0.999597662506,1.070997495542,1.142397328578,- 1.213797161614,1.28519699465,1.356596827687,1.427996660723,- 1.499396493759,1.570796326795),.UNSPECIFIED.);-#2866 = CARTESIAN_POINT('',(3.14159265359,0.));-#2867 = CARTESIAN_POINT('',(3.14159265359,-2.379994434538E-02));-#2868 = CARTESIAN_POINT('',(3.14159265359,-7.139983303613E-02));-#2869 = CARTESIAN_POINT('',(3.14159265359,-0.142799666072));-#2870 = CARTESIAN_POINT('',(3.14159265359,-0.214199499108));-#2871 = CARTESIAN_POINT('',(3.14159265359,-0.285599332145));-#2872 = CARTESIAN_POINT('',(3.14159265359,-0.356999165181));-#2873 = CARTESIAN_POINT('',(3.14159265359,-0.428398998217));-#2874 = CARTESIAN_POINT('',(3.14159265359,-0.499798831253));-#2875 = CARTESIAN_POINT('',(3.14159265359,-0.571198664289));-#2876 = CARTESIAN_POINT('',(3.14159265359,-0.642598497325));-#2877 = CARTESIAN_POINT('',(3.14159265359,-0.713998330361));-#2878 = CARTESIAN_POINT('',(3.14159265359,-0.785398163397));-#2879 = CARTESIAN_POINT('',(3.14159265359,-0.856797996434));-#2880 = CARTESIAN_POINT('',(3.14159265359,-0.92819782947));-#2881 = CARTESIAN_POINT('',(3.14159265359,-0.999597662506));-#2882 = CARTESIAN_POINT('',(3.14159265359,-1.070997495542));-#2883 = CARTESIAN_POINT('',(3.14159265359,-1.142397328578));-#2884 = CARTESIAN_POINT('',(3.14159265359,-1.213797161614));-#2885 = CARTESIAN_POINT('',(3.14159265359,-1.28519699465));-#2886 = CARTESIAN_POINT('',(3.14159265359,-1.356596827687));-#2887 = CARTESIAN_POINT('',(3.14159265359,-1.427996660723));-#2888 = CARTESIAN_POINT('',(3.14159265359,-1.499396493759));-#2889 = CARTESIAN_POINT('',(3.14159265359,-1.54699638245));-#2890 = CARTESIAN_POINT('',(3.14159265359,-1.570796326795));-#2891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2892 = ORIENTED_EDGE('',*,*,#2302,.T.);-#2893 = ADVANCED_FACE('',(#2894),#1775,.T.);-#2894 = FACE_BOUND('',#2895,.T.);-#2895 = EDGE_LOOP('',(#2896,#2897,#2898,#2947));-#2896 = ORIENTED_EDGE('',*,*,#2723,.F.);-#2897 = ORIENTED_EDGE('',*,*,#2402,.T.);-#2898 = ORIENTED_EDGE('',*,*,#2899,.T.);-#2899 = EDGE_CURVE('',#2373,#1760,#2900,.T.);-#2900 = SURFACE_CURVE('',#2901,(#2906,#2913),.PCURVE_S1.);-#2901 = CIRCLE('',#2902,5.E-02);-#2902 = AXIS2_PLACEMENT_3D('',#2903,#2904,#2905);-#2903 = CARTESIAN_POINT('',(0.95,5.E-02,-0.575));-#2904 = DIRECTION('',(-0.,0.,1.));-#2905 = DIRECTION('',(1.,0.,0.));-#2906 = PCURVE('',#1775,#2907);-#2907 = DEFINITIONAL_REPRESENTATION('',(#2908),#2912);-#2908 = LINE('',#2909,#2910);-#2909 = CARTESIAN_POINT('',(-3.14159265359,5.E-02));-#2910 = VECTOR('',#2911,1.);-#2911 = DIRECTION('',(1.,-7.067899292141E-17));-#2912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2913 = PCURVE('',#2914,#2919);-#2914 = SPHERICAL_SURFACE('',#2915,5.E-02);-#2915 = AXIS2_PLACEMENT_3D('',#2916,#2917,#2918);-#2916 = CARTESIAN_POINT('',(0.95,5.E-02,-0.575));-#2917 = DIRECTION('',(0.,-1.,0.));-#2918 = DIRECTION('',(-1.,0.,0.));-#2919 = DEFINITIONAL_REPRESENTATION('',(#2920),#2946);-#2920 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2921,#2922,#2923,#2924,#2925,- #2926,#2927,#2928,#2929,#2930,#2931,#2932,#2933,#2934,#2935,#2936,- #2937,#2938,#2939,#2940,#2941,#2942,#2943,#2944,#2945),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (4.712388980385,4.783788813421,4.855188646457,4.926588479493,- 4.997988312529,5.069388145565,5.140787978601,5.212187811638,- 5.283587644674,5.35498747771,5.426387310746,5.497787143782,- 5.569186976818,5.640586809854,5.711986642891,5.783386475927,- 5.854786308963,5.926186141999,5.997585975035,6.068985808071,- 6.140385641107,6.211785474143,6.28318530718),.UNSPECIFIED.);-#2921 = CARTESIAN_POINT('',(3.14159265359,1.570796326795));-#2922 = CARTESIAN_POINT('',(3.14159265359,1.54699638245));-#2923 = CARTESIAN_POINT('',(3.14159265359,1.499396493759));-#2924 = CARTESIAN_POINT('',(3.14159265359,1.427996660723));-#2925 = CARTESIAN_POINT('',(3.14159265359,1.356596827687));-#2926 = CARTESIAN_POINT('',(3.14159265359,1.28519699465));-#2927 = CARTESIAN_POINT('',(3.14159265359,1.213797161614));-#2928 = CARTESIAN_POINT('',(3.14159265359,1.142397328578));-#2929 = CARTESIAN_POINT('',(3.14159265359,1.070997495542));-#2930 = CARTESIAN_POINT('',(3.14159265359,0.999597662506));-#2931 = CARTESIAN_POINT('',(3.14159265359,0.92819782947));-#2932 = CARTESIAN_POINT('',(3.14159265359,0.856797996434));-#2933 = CARTESIAN_POINT('',(3.14159265359,0.785398163397));-#2934 = CARTESIAN_POINT('',(3.14159265359,0.713998330361));-#2935 = CARTESIAN_POINT('',(3.14159265359,0.642598497325));-#2936 = CARTESIAN_POINT('',(3.14159265359,0.571198664289));-#2937 = CARTESIAN_POINT('',(3.14159265359,0.499798831253));-#2938 = CARTESIAN_POINT('',(3.14159265359,0.428398998217));-#2939 = CARTESIAN_POINT('',(3.14159265359,0.356999165181));-#2940 = CARTESIAN_POINT('',(3.14159265359,0.285599332145));-#2941 = CARTESIAN_POINT('',(3.14159265359,0.214199499108));-#2942 = CARTESIAN_POINT('',(3.14159265359,0.142799666072));-#2943 = CARTESIAN_POINT('',(3.14159265359,7.139983303613E-02));-#2944 = CARTESIAN_POINT('',(3.14159265359,2.379994434538E-02));-#2945 = CARTESIAN_POINT('',(3.14159265359,2.775557561563E-16));-#2946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2947 = ORIENTED_EDGE('',*,*,#1759,.T.);-#2948 = ADVANCED_FACE('',(#2949),#2236,.T.);-#2949 = FACE_BOUND('',#2950,.T.);-#2950 = EDGE_LOOP('',(#2951,#2952,#2996,#2997));-#2951 = ORIENTED_EDGE('',*,*,#2220,.T.);-#2952 = ORIENTED_EDGE('',*,*,#2953,.T.);-#2953 = EDGE_CURVE('',#2198,#2373,#2954,.T.);-#2954 = SURFACE_CURVE('',#2955,(#2960,#2967),.PCURVE_S1.);-#2955 = CIRCLE('',#2956,5.E-02);-#2956 = AXIS2_PLACEMENT_3D('',#2957,#2958,#2959);-#2957 = CARTESIAN_POINT('',(0.95,5.E-02,-0.575));-#2958 = DIRECTION('',(-1.,0.,0.));-#2959 = DIRECTION('',(0.,0.,1.));-#2960 = PCURVE('',#2236,#2961);-#2961 = DEFINITIONAL_REPRESENTATION('',(#2962),#2966);-#2962 = LINE('',#2963,#2964);-#2963 = CARTESIAN_POINT('',(6.28318530718,-5.E-02));-#2964 = VECTOR('',#2965,1.);-#2965 = DIRECTION('',(-1.,0.));-#2966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2967 = PCURVE('',#2914,#2968);-#2968 = DEFINITIONAL_REPRESENTATION('',(#2969),#2995);-#2969 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2970,#2971,#2972,#2973,#2974,- #2975,#2976,#2977,#2978,#2979,#2980,#2981,#2982,#2983,#2984,#2985,- #2986,#2987,#2988,#2989,#2990,#2991,#2992,#2993,#2994),- .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),- (3.14159265359,3.212992486626,3.284392319662,3.355792152698,- 3.427191985734,3.49859181877,3.569991651807,3.641391484843,- 3.712791317879,3.784191150915,3.855590983951,3.926990816987,- 3.998390650023,4.06979048306,4.141190316096,4.212590149132,- 4.283989982168,4.355389815204,4.42678964824,4.498189481276,- 4.569589314312,4.640989147349,4.712388980385),.UNSPECIFIED.);-#2970 = CARTESIAN_POINT('',(1.570796326795,-5.551115123126E-16));-#2971 = CARTESIAN_POINT('',(1.570796326795,2.379994434538E-02));-#2972 = CARTESIAN_POINT('',(1.570796326795,7.139983303613E-02));-#2973 = CARTESIAN_POINT('',(1.570796326795,0.142799666072));-#2974 = CARTESIAN_POINT('',(1.570796326795,0.214199499108));-#2975 = CARTESIAN_POINT('',(1.570796326795,0.285599332145));-#2976 = CARTESIAN_POINT('',(1.570796326795,0.356999165181));-#2977 = CARTESIAN_POINT('',(1.570796326795,0.428398998217));-#2978 = CARTESIAN_POINT('',(1.570796326795,0.499798831253));-#2979 = CARTESIAN_POINT('',(1.570796326795,0.571198664289));-#2980 = CARTESIAN_POINT('',(1.570796326795,0.642598497325));-#2981 = CARTESIAN_POINT('',(1.570796326795,0.713998330361));-#2982 = CARTESIAN_POINT('',(1.570796326795,0.785398163397));-#2983 = CARTESIAN_POINT('',(1.570796326795,0.856797996434));-#2984 = CARTESIAN_POINT('',(1.570796326795,0.92819782947));-#2985 = CARTESIAN_POINT('',(1.570796326795,0.999597662506));-#2986 = CARTESIAN_POINT('',(1.570796326795,1.070997495542));-#2987 = CARTESIAN_POINT('',(1.570796326795,1.142397328578));-#2988 = CARTESIAN_POINT('',(1.570796326795,1.213797161614));-#2989 = CARTESIAN_POINT('',(1.570796326795,1.28519699465));-#2990 = CARTESIAN_POINT('',(1.570796326795,1.356596827687));-#2991 = CARTESIAN_POINT('',(1.570796326795,1.427996660723));-#2992 = CARTESIAN_POINT('',(1.570796326795,1.499396493759));-#2993 = CARTESIAN_POINT('',(1.570796326795,1.54699638245));-#2994 = CARTESIAN_POINT('',(1.570796326795,1.570796326795));-#2995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2996 = ORIENTED_EDGE('',*,*,#2372,.T.);-#2997 = ORIENTED_EDGE('',*,*,#2998,.F.);-#2998 = EDGE_CURVE('',#2221,#2375,#2999,.T.);-#2999 = SURFACE_CURVE('',#3000,(#3005,#3012),.PCURVE_S1.);-#3000 = CIRCLE('',#3001,5.E-02);-#3001 = AXIS2_PLACEMENT_3D('',#3002,#3003,#3004);-#3002 = CARTESIAN_POINT('',(0.525,5.E-02,-0.575));-#3003 = DIRECTION('',(-1.,0.,-1.734723475977E-16));-#3004 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#3005 = PCURVE('',#2236,#3006);-#3006 = DEFINITIONAL_REPRESENTATION('',(#3007),#3011);-#3007 = LINE('',#3008,#3009);-#3008 = CARTESIAN_POINT('',(6.28318530718,-0.475));-#3009 = VECTOR('',#3010,1.);-#3010 = DIRECTION('',(-1.,0.));-#3011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3012 = PCURVE('',#2012,#3013);-#3013 = DEFINITIONAL_REPRESENTATION('',(#3014),#3018);-#3014 = LINE('',#3015,#3016);-#3015 = CARTESIAN_POINT('',(6.28318530718,6.28318530718));-#3016 = VECTOR('',#3017,1.);-#3017 = DIRECTION('',(-1.,0.));-#3018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3019 = ADVANCED_FACE('',(#3020),#2787,.T.);-#3020 = FACE_BOUND('',#3021,.T.);-#3021 = EDGE_LOOP('',(#3022,#3023,#3045));-#3022 = ORIENTED_EDGE('',*,*,#2849,.F.);-#3023 = ORIENTED_EDGE('',*,*,#3024,.T.);-#3024 = EDGE_CURVE('',#1699,#2163,#3025,.T.);-#3025 = SURFACE_CURVE('',#3026,(#3031,#3038),.PCURVE_S1.);-#3026 = CIRCLE('',#3027,5.E-02);-#3027 = AXIS2_PLACEMENT_3D('',#3028,#3029,#3030);-#3028 = CARTESIAN_POINT('',(0.95,0.9,-0.575));-#3029 = DIRECTION('',(0.,1.,0.));-#3030 = DIRECTION('',(0.,-0.,1.));-#3031 = PCURVE('',#2787,#3032);-#3032 = DEFINITIONAL_REPRESENTATION('',(#3033),#3037);-#3033 = LINE('',#3034,#3035);-#3034 = CARTESIAN_POINT('',(4.712388980385,0.));-#3035 = VECTOR('',#3036,1.);-#3036 = DIRECTION('',(-1.,0.));-#3037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3038 = PCURVE('',#1801,#3039);-#3039 = DEFINITIONAL_REPRESENTATION('',(#3040),#3044);-#3040 = LINE('',#3041,#3042);-#3041 = CARTESIAN_POINT('',(3.14159265359,5.E-02));-#3042 = VECTOR('',#3043,1.);-#3043 = DIRECTION('',(-1.,0.));-#3044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3045 = ORIENTED_EDGE('',*,*,#2772,.F.);-#3046 = ADVANCED_FACE('',(#3047),#2914,.T.);-#3047 = FACE_BOUND('',#3048,.T.);-#3048 = EDGE_LOOP('',(#3049,#3050,#3072));-#3049 = ORIENTED_EDGE('',*,*,#2953,.F.);-#3050 = ORIENTED_EDGE('',*,*,#3051,.T.);-#3051 = EDGE_CURVE('',#2198,#1760,#3052,.T.);-#3052 = SURFACE_CURVE('',#3053,(#3058,#3065),.PCURVE_S1.);-#3053 = CIRCLE('',#3054,5.E-02);-#3054 = AXIS2_PLACEMENT_3D('',#3055,#3056,#3057);-#3055 = CARTESIAN_POINT('',(0.95,5.E-02,-0.575));-#3056 = DIRECTION('',(0.,-1.,0.));-#3057 = DIRECTION('',(0.,0.,-1.));-#3058 = PCURVE('',#2914,#3059);-#3059 = DEFINITIONAL_REPRESENTATION('',(#3060),#3064);-#3060 = LINE('',#3061,#3062);-#3061 = CARTESIAN_POINT('',(1.570796326795,-4.163336342344E-16));-#3062 = VECTOR('',#3063,1.);-#3063 = DIRECTION('',(1.,0.));-#3064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3065 = PCURVE('',#1801,#3066);-#3066 = DEFINITIONAL_REPRESENTATION('',(#3067),#3071);-#3067 = LINE('',#3068,#3069);-#3068 = CARTESIAN_POINT('',(0.,0.9));-#3069 = VECTOR('',#3070,1.);-#3070 = DIRECTION('',(1.,0.));-#3071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3072 = ORIENTED_EDGE('',*,*,#2899,.F.);-#3073 = ADVANCED_FACE('',(#3074),#1801,.T.);-#3074 = FACE_BOUND('',#3075,.T.);-#3075 = EDGE_LOOP('',(#3076,#3077,#3078,#3079));-#3076 = ORIENTED_EDGE('',*,*,#3024,.F.);-#3077 = ORIENTED_EDGE('',*,*,#1787,.T.);-#3078 = ORIENTED_EDGE('',*,*,#3051,.F.);-#3079 = ORIENTED_EDGE('',*,*,#2197,.T.);-#3080 = ADVANCED_FACE('',(#3081),#2040,.T.);-#3081 = FACE_BOUND('',#3082,.T.);-#3082 = EDGE_LOOP('',(#3083,#3105,#3106,#3128));-#3083 = ORIENTED_EDGE('',*,*,#3084,.T.);-#3084 = EDGE_CURVE('',#1996,#2375,#3085,.T.);-#3085 = SURFACE_CURVE('',#3086,(#3091,#3098),.PCURVE_S1.);-#3086 = CIRCLE('',#3087,2.5E-02);-#3087 = AXIS2_PLACEMENT_3D('',#3088,#3089,#3090);-#3088 = CARTESIAN_POINT('',(0.525,2.5E-02,-0.575));-#3089 = DIRECTION('',(0.,-0.,1.));-#3090 = DIRECTION('',(1.,0.,0.));-#3091 = PCURVE('',#2040,#3092);-#3092 = DEFINITIONAL_REPRESENTATION('',(#3093),#3097);-#3093 = LINE('',#3094,#3095);-#3094 = CARTESIAN_POINT('',(6.28318530718,-5.E-02));-#3095 = VECTOR('',#3096,1.);-#3096 = DIRECTION('',(-1.,0.));-#3097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3098 = PCURVE('',#2012,#3099);+#2843 = PCURVE('',#1748,#2844);+#2844 = DEFINITIONAL_REPRESENTATION('',(#2845),#2849);+#2845 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2846,#2847,#2848),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2846 = CARTESIAN_POINT('',(3.14159265359,4.712388980385));+#2847 = CARTESIAN_POINT('',(3.14159265359,5.497787143782));+#2848 = CARTESIAN_POINT('',(3.14159265359,6.28318530718));+#2849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2850 = ORIENTED_EDGE('',*,*,#2054,.T.);+#2851 = ADVANCED_FACE('',(#2852),#1924,.T.);+#2852 = FACE_BOUND('',#2853,.T.);+#2853 = EDGE_LOOP('',(#2854,#2855,#2856,#2877));+#2854 = ORIENTED_EDGE('',*,*,#2803,.F.);+#2855 = ORIENTED_EDGE('',*,*,#2293,.T.);+#2856 = ORIENTED_EDGE('',*,*,#2857,.T.);+#2857 = EDGE_CURVE('',#2079,#1909,#2858,.T.);+#2858 = SURFACE_CURVE('',#2859,(#2863,#2870),.PCURVE_S1.);+#2859 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2860,#2861,#2862),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2860 = CARTESIAN_POINT('',(0.525,1.24999955,0.575));+#2861 = CARTESIAN_POINT('',(0.5,1.24999955,0.575));+#2862 = CARTESIAN_POINT('',(0.5,1.217104825,0.575));+#2863 = PCURVE('',#1924,#2864);+#2864 = DEFINITIONAL_REPRESENTATION('',(#2865),#2869);+#2865 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2866,#2867,#2868),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2866 = CARTESIAN_POINT('',(4.712388980385,6.28318530718));+#2867 = CARTESIAN_POINT('',(4.712388980385,5.497787143782));+#2868 = CARTESIAN_POINT('',(4.712388980385,4.712388980385));+#2869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2870 = PCURVE('',#1953,#2871);+#2871 = DEFINITIONAL_REPRESENTATION('',(#2872),#2876);+#2872 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2873,#2874,#2875),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#2873 = CARTESIAN_POINT('',(4.712388980385,0.575));+#2874 = CARTESIAN_POINT('',(5.497787143782,0.575));+#2875 = CARTESIAN_POINT('',(6.28318530718,0.575));+#2876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2877 = ORIENTED_EDGE('',*,*,#1908,.T.);+#2878 = ADVANCED_FACE('',(#2879),#1748,.T.);+#2879 = FACE_BOUND('',#2880,.T.);+#2880 = EDGE_LOOP('',(#2881,#2882,#2883,#2904));+#2881 = ORIENTED_EDGE('',*,*,#2830,.F.);+#2882 = ORIENTED_EDGE('',*,*,#1725,.T.);+#2883 = ORIENTED_EDGE('',*,*,#2884,.T.);+#2884 = EDGE_CURVE('',#1728,#2126,#2885,.T.);+#2885 = SURFACE_CURVE('',#2886,(#2890,#2897),.PCURVE_S1.);+#2886 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2887,#2888,#2889),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2887 = CARTESIAN_POINT('',(0.5,1.217104825,-0.575));+#2888 = CARTESIAN_POINT('',(0.5,1.24999955,-0.575));+#2889 = CARTESIAN_POINT('',(0.525,1.24999955,-0.575));+#2890 = PCURVE('',#1748,#2891);+#2891 = DEFINITIONAL_REPRESENTATION('',(#2892),#2896);+#2892 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2893,#2894,#2895),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2893 = CARTESIAN_POINT('',(4.712388980385,4.712388980385));+#2894 = CARTESIAN_POINT('',(4.712388980385,5.497787143782));+#2895 = CARTESIAN_POINT('',(4.712388980385,6.28318530718));+#2896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2897 = PCURVE('',#1953,#2898);+#2898 = DEFINITIONAL_REPRESENTATION('',(#2899),#2903);+#2899 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2900,#2901,#2902),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#2900 = CARTESIAN_POINT('',(6.28318530718,-0.575));+#2901 = CARTESIAN_POINT('',(5.497787143782,-0.575));+#2902 = CARTESIAN_POINT('',(4.712388980385,-0.575));+#2903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2904 = ORIENTED_EDGE('',*,*,#2506,.T.);+#2905 = ADVANCED_FACE('',(#2906),#1953,.T.);+#2906 = FACE_BOUND('',#2907,.T.);+#2907 = EDGE_LOOP('',(#2908,#2909,#2910,#2911));+#2908 = ORIENTED_EDGE('',*,*,#2857,.F.);+#2909 = ORIENTED_EDGE('',*,*,#2146,.T.);+#2910 = ORIENTED_EDGE('',*,*,#2884,.F.);+#2911 = ORIENTED_EDGE('',*,*,#1941,.T.);+#2912 = MANIFOLD_SOLID_BREP('',#2913);+#2913 = CLOSED_SHELL('',(#2914,#3142,#3322,#3365,#3390,#3415,#3440,#3465+ ,#3490,#3515));+#2914 = ADVANCED_FACE('',(#2915),#2929,.T.);+#2915 = FACE_BOUND('',#2916,.T.);+#2916 = EDGE_LOOP('',(#2917,#2954,#2979,#3009,#3034,#3064,#3089,#3119));+#2917 = ORIENTED_EDGE('',*,*,#2918,.F.);+#2918 = EDGE_CURVE('',#2919,#2921,#2923,.T.);+#2919 = VERTEX_POINT('',#2920);+#2920 = CARTESIAN_POINT('',(0.499999999982,1.217104825,-0.575));+#2921 = VERTEX_POINT('',#2922);+#2922 = CARTESIAN_POINT('',(0.499999999988,1.1842101,-0.6));+#2923 = SURFACE_CURVE('',#2924,(#2928,#2940),.PCURVE_S1.);+#2924 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2925,#2926,#2927),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2925 = CARTESIAN_POINT('',(0.5,1.217104825,-0.575));+#2926 = CARTESIAN_POINT('',(0.5,1.217104825,-0.6));+#2927 = CARTESIAN_POINT('',(0.5,1.1842101,-0.6));+#2928 = PCURVE('',#2929,#2934);+#2929 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2930,#2931)+ ,(#2932,#2933+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(2.5E-02,1.225),(2.5E-02,+ 0.925),.PIECEWISE_BEZIER_KNOTS.);+#2930 = CARTESIAN_POINT('',(0.5,1.217104825,-0.6));+#2931 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.6));+#2932 = CARTESIAN_POINT('',(0.5,1.217104825,0.6));+#2933 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.6));+#2934 = DEFINITIONAL_REPRESENTATION('',(#2935),#2939);+#2935 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2936,#2937,#2938),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2936 = CARTESIAN_POINT('',(5.E-02,2.5E-02));+#2937 = CARTESIAN_POINT('',(2.5E-02,2.5E-02));+#2938 = CARTESIAN_POINT('',(2.5E-02,5.E-02));+#2939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2940 = PCURVE('',#2941,#2948);+#2941 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#2942,#2943)+ ,(#2944,#2945)+ ,(#2946,#2947+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 1.570796326795,3.14159265359),(4.999995E+05,5.000005E+05),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2942 = CARTESIAN_POINT('',(0.5,1.217104825,-0.575));+#2943 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#2944 = CARTESIAN_POINT('',(0.5,1.217104825,-0.6));+#2945 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.6));+#2946 = CARTESIAN_POINT('',(0.5,1.1842101,-0.6));+#2947 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6));+#2948 = DEFINITIONAL_REPRESENTATION('',(#2949),#2953);+#2949 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2950,#2951,#2952),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#2950 = CARTESIAN_POINT('',(1.570796326795,4.999995E+05));+#2951 = CARTESIAN_POINT('',(2.356194490192,4.999995E+05));+#2952 = CARTESIAN_POINT('',(3.14159265359,4.999995E+05));+#2953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2954 = ORIENTED_EDGE('',*,*,#2955,.F.);+#2955 = EDGE_CURVE('',#2956,#2919,#2958,.T.);+#2956 = VERTEX_POINT('',#2957);+#2957 = CARTESIAN_POINT('',(0.499999999982,1.217104825,0.575));+#2958 = SURFACE_CURVE('',#2959,(#2962,#2968),.PCURVE_S1.);+#2959 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2960,#2961),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#2960 = CARTESIAN_POINT('',(0.5,1.217104825,0.575));+#2961 = CARTESIAN_POINT('',(0.5,1.217104825,-0.575));+#2962 = PCURVE('',#2929,#2963);+#2963 = DEFINITIONAL_REPRESENTATION('',(#2964),#2967);+#2964 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2965,#2966),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#2965 = CARTESIAN_POINT('',(1.2,2.5E-02));+#2966 = CARTESIAN_POINT('',(5.E-02,2.5E-02));+#2967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2968 = PCURVE('',#2969,#2974);+#2969 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2970,#2971)+ ,(#2972,#2973+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-1.150000000043,+ -4.336804353133E-11),(-5.000005E+05,-4.999995E+05),+ .PIECEWISE_BEZIER_KNOTS.);+#2970 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#2971 = CARTESIAN_POINT('',(0.5,1.217104825,0.575));+#2972 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#2973 = CARTESIAN_POINT('',(0.5,1.217104825,-0.575));+#2974 = DEFINITIONAL_REPRESENTATION('',(#2975),#2978);+#2975 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2976,#2977),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.575,0.575),.PIECEWISE_BEZIER_KNOTS.);+#2976 = CARTESIAN_POINT('',(-1.150000000043,-4.999995E+05));+#2977 = CARTESIAN_POINT('',(-4.336808689942E-11,-4.999995E+05));+#2978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2979 = ORIENTED_EDGE('',*,*,#2980,.F.);+#2980 = EDGE_CURVE('',#2981,#2956,#2983,.T.);+#2981 = VERTEX_POINT('',#2982);+#2982 = CARTESIAN_POINT('',(0.499999999982,1.1842101,0.6));+#2983 = SURFACE_CURVE('',#2984,(#2988,#2995),.PCURVE_S1.);+#2984 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2985,#2986,#2987),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2985 = CARTESIAN_POINT('',(0.5,1.1842101,0.6));+#2986 = CARTESIAN_POINT('',(0.5,1.217104825,0.6));+#2987 = CARTESIAN_POINT('',(0.5,1.217104825,0.575));+#2988 = PCURVE('',#2929,#2989);+#2989 = DEFINITIONAL_REPRESENTATION('',(#2990),#2994);+#2990 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2991,#2992,#2993),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#2991 = CARTESIAN_POINT('',(1.225,5.E-02));+#2992 = CARTESIAN_POINT('',(1.225,2.5E-02));+#2993 = CARTESIAN_POINT('',(1.2,2.5E-02));+#2994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2995 = PCURVE('',#2996,#3003);+#2996 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#2997,#2998)+ ,(#2999,#3000)+ ,(#3001,#3002+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 0.,1.570796326795),(4.999995E+05,5.000005E+05),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2997 = CARTESIAN_POINT('',(0.5,1.1842101,0.6));+#2998 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#2999 = CARTESIAN_POINT('',(0.5,1.217104825,0.6));+#3000 = CARTESIAN_POINT('',(-0.5,1.217104825,0.6));+#3001 = CARTESIAN_POINT('',(0.5,1.217104825,0.575));+#3002 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#3003 = DEFINITIONAL_REPRESENTATION('',(#3004),#3008);+#3004 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3005,#3006,#3007),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#3005 = CARTESIAN_POINT('',(0.,4.999995E+05));+#3006 = CARTESIAN_POINT('',(0.785398163397,4.999995E+05));+#3007 = CARTESIAN_POINT('',(1.570796326795,4.999995E+05));+#3008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3009 = ORIENTED_EDGE('',*,*,#3010,.F.);+#3010 = EDGE_CURVE('',#3011,#2981,#3013,.T.);+#3011 = VERTEX_POINT('',#3012);+#3012 = CARTESIAN_POINT('',(0.499999999988,6.578945E-02,0.6));+#3013 = SURFACE_CURVE('',#3014,(#3017,#3023),.PCURVE_S1.);+#3014 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3015,#3016),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#3015 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.6));+#3016 = CARTESIAN_POINT('',(0.5,1.1842101,0.6));+#3017 = PCURVE('',#2929,#3018);+#3018 = DEFINITIONAL_REPRESENTATION('',(#3019),#3022);+#3019 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3020,#3021),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#3020 = CARTESIAN_POINT('',(1.225,0.9));+#3021 = CARTESIAN_POINT('',(1.225,5.E-02));+#3022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3023 = PCURVE('',#3024,#3029);+#3024 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#3025,#3026)+ ,(#3027,#3028+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-0.85,5.531743653255E-27),+ (-5.000005E+05,-4.999995E+05),.PIECEWISE_BEZIER_KNOTS.);+#3025 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#3026 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.6));+#3027 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#3028 = CARTESIAN_POINT('',(0.5,1.1842101,0.6));+#3029 = DEFINITIONAL_REPRESENTATION('',(#3030),#3033);+#3030 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3031,#3032),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.9,-5.E-02),.PIECEWISE_BEZIER_KNOTS.);+#3031 = CARTESIAN_POINT('',(-0.85,-4.999995E+05));+#3032 = CARTESIAN_POINT('',(5.531738121517E-27,-4.999995E+05));+#3033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3034 = ORIENTED_EDGE('',*,*,#3035,.F.);+#3035 = EDGE_CURVE('',#3036,#3011,#3038,.T.);+#3036 = VERTEX_POINT('',#3037);+#3037 = CARTESIAN_POINT('',(0.499999999982,3.2894725E-02,0.575));+#3038 = SURFACE_CURVE('',#3039,(#3043,#3050),.PCURVE_S1.);+#3039 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3040,#3041,#3042),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3040 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.575));+#3041 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.6));+#3042 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.6));+#3043 = PCURVE('',#2929,#3044);+#3044 = DEFINITIONAL_REPRESENTATION('',(#3045),#3049);+#3045 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3046,#3047,#3048),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3046 = CARTESIAN_POINT('',(1.2,0.925));+#3047 = CARTESIAN_POINT('',(1.225,0.925));+#3048 = CARTESIAN_POINT('',(1.225,0.9));+#3049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3050 = PCURVE('',#3051,#3058);+#3051 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#3052,#3053)+ ,(#3054,#3055)+ ,(#3056,#3057+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 4.712388980385,6.28318530718),(4.999995E+05,5.000005E+05),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#3052 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.575));+#3053 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#3054 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.6));+#3055 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.6));+#3056 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.6));+#3057 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#3058 = DEFINITIONAL_REPRESENTATION('',(#3059),#3063);+#3059 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3060,#3061,#3062),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#3060 = CARTESIAN_POINT('',(4.712388980385,4.999995E+05));+#3061 = CARTESIAN_POINT('',(5.497787143782,4.999995E+05));+#3062 = CARTESIAN_POINT('',(6.28318530718,4.999995E+05));+#3063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3064 = ORIENTED_EDGE('',*,*,#3065,.T.);+#3065 = EDGE_CURVE('',#3036,#3066,#3068,.T.);+#3066 = VERTEX_POINT('',#3067);+#3067 = CARTESIAN_POINT('',(0.499999999988,3.2894725E-02,-0.575));+#3068 = SURFACE_CURVE('',#3069,(#3072,#3078),.PCURVE_S1.);+#3069 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3070,#3071),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.30104149676E-10,1.14999999987),+ .PIECEWISE_BEZIER_KNOTS.);+#3070 = CARTESIAN_POINT('',(0.499999999988,3.2894725E-02,0.575));+#3071 = CARTESIAN_POINT('',(0.499999999988,3.2894725E-02,-0.575));+#3072 = PCURVE('',#2929,#3073);+#3073 = DEFINITIONAL_REPRESENTATION('',(#3074),#3077);+#3074 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3075,#3076),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.30104149676E-10,1.14999999987),+ .PIECEWISE_BEZIER_KNOTS.);+#3075 = CARTESIAN_POINT('',(1.2,0.925));+#3076 = CARTESIAN_POINT('',(5.E-02,0.925));+#3077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3078 = PCURVE('',#3079,#3084);+#3079 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#3080,#3081)+ ,(#3082,#3083+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-1.149999999957,+ 4.336813026751E-11),(-5.000005E+05,-4.999995E+05),+ .PIECEWISE_BEZIER_KNOTS.);+#3080 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#3081 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.575));+#3082 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#3083 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.575));+#3084 = DEFINITIONAL_REPRESENTATION('',(#3085),#3088);+#3085 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3086,#3087),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.30104149676E-10,1.14999999987),+ .PIECEWISE_BEZIER_KNOTS.);+#3086 = CARTESIAN_POINT('',(4.336808689942E-11,-4.999995E+05));+#3087 = CARTESIAN_POINT('',(-1.149999999957,-4.999995E+05));+#3088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3089 = ORIENTED_EDGE('',*,*,#3090,.F.);+#3090 = EDGE_CURVE('',#3091,#3066,#3093,.T.);+#3091 = VERTEX_POINT('',#3092);+#3092 = CARTESIAN_POINT('',(0.499999999982,6.578945E-02,-0.6));+#3093 = SURFACE_CURVE('',#3094,(#3098,#3105),.PCURVE_S1.);+#3094 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3095,#3096,#3097),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3095 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.6));+#3096 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.6));+#3097 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.575));+#3098 = PCURVE('',#2929,#3099); #3099 = DEFINITIONAL_REPRESENTATION('',(#3100),#3104);-#3100 = LINE('',#3101,#3102);-#3101 = CARTESIAN_POINT('',(1.570796326795,1.570796326795));-#3102 = VECTOR('',#3103,1.);-#3103 = DIRECTION('',(0.,1.));+#3100 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3101,#3102,#3103),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3101 = CARTESIAN_POINT('',(2.5E-02,0.9));+#3102 = CARTESIAN_POINT('',(2.5E-02,0.925));+#3103 = CARTESIAN_POINT('',(5.E-02,0.925)); #3104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3105 = ORIENTED_EDGE('',*,*,#2448,.T.);-#3106 = ORIENTED_EDGE('',*,*,#3107,.T.);-#3107 = EDGE_CURVE('',#2426,#2025,#3108,.T.);-#3108 = SURFACE_CURVE('',#3109,(#3114,#3121),.PCURVE_S1.);-#3109 = CIRCLE('',#3110,2.5E-02);-#3110 = AXIS2_PLACEMENT_3D('',#3111,#3112,#3113);-#3111 = CARTESIAN_POINT('',(0.525,2.5E-02,0.575));-#3112 = DIRECTION('',(0.,0.,-1.));-#3113 = DIRECTION('',(-1.,0.,0.));-#3114 = PCURVE('',#2040,#3115);-#3115 = DEFINITIONAL_REPRESENTATION('',(#3116),#3120);-#3116 = LINE('',#3117,#3118);-#3117 = CARTESIAN_POINT('',(-3.14159265359,-1.2));-#3118 = VECTOR('',#3119,1.);-#3119 = DIRECTION('',(1.,0.));-#3120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3121 = PCURVE('',#2069,#3122);-#3122 = DEFINITIONAL_REPRESENTATION('',(#3123),#3127);-#3123 = LINE('',#3124,#3125);-#3124 = CARTESIAN_POINT('',(1.570796326795,10.995574287564));-#3125 = VECTOR('',#3126,1.);-#3126 = DIRECTION('',(0.,-1.));-#3127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3128 = ORIENTED_EDGE('',*,*,#2024,.T.);-#3129 = ADVANCED_FACE('',(#3130),#2069,.T.);-#3130 = FACE_BOUND('',#3131,.T.);-#3131 = EDGE_LOOP('',(#3132,#3133,#3134,#3156));-#3132 = ORIENTED_EDGE('',*,*,#3107,.F.);-#3133 = ORIENTED_EDGE('',*,*,#2648,.T.);-#3134 = ORIENTED_EDGE('',*,*,#3135,.T.);-#3135 = EDGE_CURVE('',#1819,#2053,#3136,.T.);-#3136 = SURFACE_CURVE('',#3137,(#3142,#3149),.PCURVE_S1.);-#3137 = CIRCLE('',#3138,2.5E-02);-#3138 = AXIS2_PLACEMENT_3D('',#3139,#3140,#3141);-#3139 = CARTESIAN_POINT('',(0.525,5.E-02,0.6));-#3140 = DIRECTION('',(0.,-1.,0.));-#3141 = DIRECTION('',(0.,0.,1.));-#3142 = PCURVE('',#2069,#3143);-#3143 = DEFINITIONAL_REPRESENTATION('',(#3144),#3148);-#3144 = LINE('',#3145,#3146);-#3145 = CARTESIAN_POINT('',(0.,6.28318530718));-#3146 = VECTOR('',#3147,1.);-#3147 = DIRECTION('',(0.,-1.));-#3148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3149 = PCURVE('',#1916,#3150);-#3150 = DEFINITIONAL_REPRESENTATION('',(#3151),#3155);-#3151 = LINE('',#3152,#3153);-#3152 = CARTESIAN_POINT('',(3.14159265359,0.9));-#3153 = VECTOR('',#3154,1.);-#3154 = DIRECTION('',(1.,0.));-#3155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3156 = ORIENTED_EDGE('',*,*,#2052,.T.);-#3157 = ADVANCED_FACE('',(#3158),#2012,.T.);-#3158 = FACE_BOUND('',#3159,.T.);-#3159 = EDGE_LOOP('',(#3160,#3161,#3162,#3184));-#3160 = ORIENTED_EDGE('',*,*,#3084,.F.);-#3161 = ORIENTED_EDGE('',*,*,#1995,.T.);-#3162 = ORIENTED_EDGE('',*,*,#3163,.T.);-#3163 = EDGE_CURVE('',#1968,#2221,#3164,.T.);-#3164 = SURFACE_CURVE('',#3165,(#3170,#3177),.PCURVE_S1.);-#3165 = CIRCLE('',#3166,2.5E-02);-#3166 = AXIS2_PLACEMENT_3D('',#3167,#3168,#3169);-#3167 = CARTESIAN_POINT('',(0.525,5.E-02,-0.6));-#3168 = DIRECTION('',(0.,-1.,0.));-#3169 = DIRECTION('',(0.,0.,1.));-#3170 = PCURVE('',#2012,#3171);-#3171 = DEFINITIONAL_REPRESENTATION('',(#3172),#3176);-#3172 = LINE('',#3173,#3174);-#3173 = CARTESIAN_POINT('',(3.14159265359,3.14159265359));-#3174 = VECTOR('',#3175,1.);-#3175 = DIRECTION('',(0.,1.));-#3176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3177 = PCURVE('',#1983,#3178);-#3178 = DEFINITIONAL_REPRESENTATION('',(#3179),#3183);-#3179 = LINE('',#3180,#3181);-#3180 = CARTESIAN_POINT('',(3.14159265359,0.9));-#3181 = VECTOR('',#3182,1.);-#3182 = DIRECTION('',(1.,0.));-#3183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3184 = ORIENTED_EDGE('',*,*,#2998,.T.);-#3185 = ADVANCED_FACE('',(#3186),#1916,.T.);-#3186 = FACE_BOUND('',#3187,.T.);-#3187 = EDGE_LOOP('',(#3188,#3189,#3190,#3212));-#3188 = ORIENTED_EDGE('',*,*,#3135,.F.);-#3189 = ORIENTED_EDGE('',*,*,#1902,.T.);-#3190 = ORIENTED_EDGE('',*,*,#3191,.T.);-#3191 = EDGE_CURVE('',#1875,#2082,#3192,.T.);-#3192 = SURFACE_CURVE('',#3193,(#3198,#3205),.PCURVE_S1.);-#3193 = CIRCLE('',#3194,2.5E-02);-#3194 = AXIS2_PLACEMENT_3D('',#3195,#3196,#3197);-#3195 = CARTESIAN_POINT('',(0.525,0.9,0.6));-#3196 = DIRECTION('',(0.,-1.,0.));-#3197 = DIRECTION('',(0.,0.,1.));-#3198 = PCURVE('',#1916,#3199);-#3199 = DEFINITIONAL_REPRESENTATION('',(#3200),#3204);-#3200 = LINE('',#3201,#3202);-#3201 = CARTESIAN_POINT('',(3.14159265359,5.E-02));-#3202 = VECTOR('',#3203,1.);-#3203 = DIRECTION('',(1.,0.));-#3204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3205 = PCURVE('',#2121,#3206);-#3206 = DEFINITIONAL_REPRESENTATION('',(#3207),#3211);-#3207 = LINE('',#3208,#3209);-#3208 = CARTESIAN_POINT('',(6.28318530718,6.28318530718));-#3209 = VECTOR('',#3210,1.);-#3210 = DIRECTION('',(0.,-1.));-#3211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3212 = ORIENTED_EDGE('',*,*,#2081,.T.);-#3213 = ADVANCED_FACE('',(#3214),#1983,.T.);-#3214 = FACE_BOUND('',#3215,.T.);-#3215 = EDGE_LOOP('',(#3216,#3217,#3218,#3240));-#3216 = ORIENTED_EDGE('',*,*,#3163,.F.);-#3217 = ORIENTED_EDGE('',*,*,#1967,.T.);-#3218 = ORIENTED_EDGE('',*,*,#3219,.T.);-#3219 = EDGE_CURVE('',#1932,#2165,#3220,.T.);-#3220 = SURFACE_CURVE('',#3221,(#3226,#3233),.PCURVE_S1.);-#3221 = CIRCLE('',#3222,2.5E-02);-#3222 = AXIS2_PLACEMENT_3D('',#3223,#3224,#3225);-#3223 = CARTESIAN_POINT('',(0.525,0.9,-0.6));-#3224 = DIRECTION('',(0.,-1.,0.));-#3225 = DIRECTION('',(0.,0.,1.));-#3226 = PCURVE('',#1983,#3227);-#3227 = DEFINITIONAL_REPRESENTATION('',(#3228),#3232);-#3228 = LINE('',#3229,#3230);-#3229 = CARTESIAN_POINT('',(3.14159265359,5.E-02));-#3230 = VECTOR('',#3231,1.);-#3231 = DIRECTION('',(1.,0.));-#3232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3233 = PCURVE('',#1955,#3234);-#3234 = DEFINITIONAL_REPRESENTATION('',(#3235),#3239);-#3235 = LINE('',#3236,#3237);-#3236 = CARTESIAN_POINT('',(3.14159265359,3.14159265359));-#3237 = VECTOR('',#3238,1.);-#3238 = DIRECTION('',(0.,1.));-#3239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3240 = ORIENTED_EDGE('',*,*,#2248,.T.);-#3241 = ADVANCED_FACE('',(#3242),#2121,.T.);-#3242 = FACE_BOUND('',#3243,.T.);-#3243 = EDGE_LOOP('',(#3244,#3245,#3246,#3268));-#3244 = ORIENTED_EDGE('',*,*,#3191,.F.);-#3245 = ORIENTED_EDGE('',*,*,#2523,.T.);-#3246 = ORIENTED_EDGE('',*,*,#3247,.T.);-#3247 = EDGE_CURVE('',#2275,#2105,#3248,.T.);-#3248 = SURFACE_CURVE('',#3249,(#3254,#3261),.PCURVE_S1.);-#3249 = CIRCLE('',#3250,2.5E-02);-#3250 = AXIS2_PLACEMENT_3D('',#3251,#3252,#3253);-#3251 = CARTESIAN_POINT('',(0.525,0.925,0.575));-#3252 = DIRECTION('',(0.,-0.,1.));-#3253 = DIRECTION('',(1.,0.,0.));-#3254 = PCURVE('',#2121,#3255);+#3105 = PCURVE('',#3106,#3113);+#3106 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#3107,#3108)+ ,(#3109,#3110)+ ,(#3111,#3112+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2),(+ 3.14159265359,4.712388980385),(4.999995E+05,5.000005E+05),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#3107 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.6));+#3108 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#3109 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.6));+#3110 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.6));+#3111 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.575));+#3112 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#3113 = DEFINITIONAL_REPRESENTATION('',(#3114),#3118);+#3114 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3115,#3116,#3117),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#3115 = CARTESIAN_POINT('',(3.14159265359,4.999995E+05));+#3116 = CARTESIAN_POINT('',(3.926990816987,4.999995E+05));+#3117 = CARTESIAN_POINT('',(4.712388980385,4.999995E+05));+#3118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3119 = ORIENTED_EDGE('',*,*,#3120,.T.);+#3120 = EDGE_CURVE('',#3091,#2921,#3121,.T.);+#3121 = SURFACE_CURVE('',#3122,(#3125,#3131),.PCURVE_S1.);+#3122 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3123,#3124),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.85),.PIECEWISE_BEZIER_KNOTS.);+#3123 = CARTESIAN_POINT('',(0.499999999988,6.578945E-02,-0.6));+#3124 = CARTESIAN_POINT('',(0.499999999988,1.1842101,-0.6));+#3125 = PCURVE('',#2929,#3126);+#3126 = DEFINITIONAL_REPRESENTATION('',(#3127),#3130);+#3127 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3128,#3129),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.85),.PIECEWISE_BEZIER_KNOTS.);+#3128 = CARTESIAN_POINT('',(2.5E-02,0.9));+#3129 = CARTESIAN_POINT('',(2.5E-02,5.E-02));+#3130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3131 = PCURVE('',#3132,#3137);+#3132 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#3133,#3134)+ ,(#3135,#3136+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.000005E+05,+ -4.999995E+05),(0.,0.85),.PIECEWISE_BEZIER_KNOTS.);+#3133 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#3134 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6));+#3135 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.6));+#3136 = CARTESIAN_POINT('',(0.5,1.1842101,-0.6));+#3137 = DEFINITIONAL_REPRESENTATION('',(#3138),#3141);+#3138 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3139,#3140),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.85),.PIECEWISE_BEZIER_KNOTS.);+#3139 = CARTESIAN_POINT('',(-4.999995E+05,0.));+#3140 = CARTESIAN_POINT('',(-4.999995E+05,0.85));+#3141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3142 = ADVANCED_FACE('',(#3143),#3157,.F.);+#3143 = FACE_BOUND('',#3144,.T.);+#3144 = EDGE_LOOP('',(#3145,#3175,#3195,#3218,#3238,#3261,#3281,#3304));+#3145 = ORIENTED_EDGE('',*,*,#3146,.F.);+#3146 = EDGE_CURVE('',#3147,#3149,#3151,.T.);+#3147 = VERTEX_POINT('',#3148);+#3148 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#3149 = VERTEX_POINT('',#3150);+#3150 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#3151 = SURFACE_CURVE('',#3152,(#3156,#3168),.PCURVE_S1.);+#3152 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3153,#3154,#3155),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3153 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#3154 = CARTESIAN_POINT('',(-0.5,1.217104825,0.6));+#3155 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#3156 = PCURVE('',#3157,#3162);+#3157 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#3158,#3159)+ ,(#3160,#3161+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-2.5E-02,1.175),(-0.875,+ 2.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#3158 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.6));+#3159 = CARTESIAN_POINT('',(-0.5,1.217104825,0.6));+#3160 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.6));+#3161 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.6));+#3162 = DEFINITIONAL_REPRESENTATION('',(#3163),#3167);+#3163 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3164,#3165,#3166),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(1.570796326795,+3.14159265359),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3164 = CARTESIAN_POINT('',(0.,2.5E-02));+#3165 = CARTESIAN_POINT('',(-2.5E-02,2.5E-02));+#3166 = CARTESIAN_POINT('',(-2.5E-02,0.));+#3167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3168 = PCURVE('',#2996,#3169);+#3169 = DEFINITIONAL_REPRESENTATION('',(#3170),#3174);+#3170 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3171,#3172,#3173),+ .UNSPECIFIED.,.F.,.F.,(3,3),(1.570796326795,3.14159265359),+ .PIECEWISE_BEZIER_KNOTS.);+#3171 = CARTESIAN_POINT('',(1.570796326795,5.000005E+05));+#3172 = CARTESIAN_POINT('',(0.785398163397,5.000005E+05));+#3173 = CARTESIAN_POINT('',(0.,5.000005E+05));+#3174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3175 = ORIENTED_EDGE('',*,*,#3176,.F.);+#3176 = EDGE_CURVE('',#3177,#3147,#3179,.T.);+#3177 = VERTEX_POINT('',#3178);+#3178 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#3179 = SURFACE_CURVE('',#3180,(#3183,#3189),.PCURVE_S1.);+#3180 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3181,#3182),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.15),.PIECEWISE_BEZIER_KNOTS.);+#3181 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#3182 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#3183 = PCURVE('',#3157,#3184);+#3184 = DEFINITIONAL_REPRESENTATION('',(#3185),#3188);+#3185 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3186,#3187),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.15),.PIECEWISE_BEZIER_KNOTS.);+#3186 = CARTESIAN_POINT('',(1.15,2.5E-02));+#3187 = CARTESIAN_POINT('',(-1.110223024625E-16,2.5E-02));+#3188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3189 = PCURVE('',#2969,#3190);+#3190 = DEFINITIONAL_REPRESENTATION('',(#3191),#3194);+#3191 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3192,#3193),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.15),.PIECEWISE_BEZIER_KNOTS.);+#3192 = CARTESIAN_POINT('',(-4.336808689942E-11,-5.000005E+05));+#3193 = CARTESIAN_POINT('',(-1.150000000043,-5.000005E+05));+#3194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3195 = ORIENTED_EDGE('',*,*,#3196,.F.);+#3196 = EDGE_CURVE('',#3197,#3177,#3199,.T.);+#3197 = VERTEX_POINT('',#3198);+#3198 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6));+#3199 = SURFACE_CURVE('',#3200,(#3204,#3211),.PCURVE_S1.);+#3200 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3201,#3202,#3203),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3201 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6));+#3202 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.6));+#3203 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#3204 = PCURVE('',#3157,#3205);+#3205 = DEFINITIONAL_REPRESENTATION('',(#3206),#3210);+#3206 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3207,#3208,#3209),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3207 = CARTESIAN_POINT('',(1.175,0.));+#3208 = CARTESIAN_POINT('',(1.175,2.5E-02));+#3209 = CARTESIAN_POINT('',(1.15,2.5E-02));+#3210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3211 = PCURVE('',#2941,#3212);+#3212 = DEFINITIONAL_REPRESENTATION('',(#3213),#3217);+#3213 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3214,#3215,#3216),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.570796326795),+ .PIECEWISE_BEZIER_KNOTS.);+#3214 = CARTESIAN_POINT('',(3.14159265359,5.000005E+05));+#3215 = CARTESIAN_POINT('',(2.356194490192,5.000005E+05));+#3216 = CARTESIAN_POINT('',(1.570796326795,5.000005E+05));+#3217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3218 = ORIENTED_EDGE('',*,*,#3219,.F.);+#3219 = EDGE_CURVE('',#3220,#3197,#3222,.T.);+#3220 = VERTEX_POINT('',#3221);+#3221 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#3222 = SURFACE_CURVE('',#3223,(#3226,#3232),.PCURVE_S1.);+#3223 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3224,#3225),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.85),.PIECEWISE_BEZIER_KNOTS.);+#3224 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#3225 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6));+#3226 = PCURVE('',#3157,#3227);+#3227 = DEFINITIONAL_REPRESENTATION('',(#3228),#3231);+#3228 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3229,#3230),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.85),.PIECEWISE_BEZIER_KNOTS.);+#3229 = CARTESIAN_POINT('',(1.175,-0.85));+#3230 = CARTESIAN_POINT('',(1.175,0.));+#3231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3232 = PCURVE('',#3132,#3233);+#3233 = DEFINITIONAL_REPRESENTATION('',(#3234),#3237);+#3234 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3235,#3236),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.85),.PIECEWISE_BEZIER_KNOTS.);+#3235 = CARTESIAN_POINT('',(-5.000005E+05,0.));+#3236 = CARTESIAN_POINT('',(-5.000005E+05,0.85));+#3237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3238 = ORIENTED_EDGE('',*,*,#3239,.F.);+#3239 = EDGE_CURVE('',#3240,#3220,#3242,.T.);+#3240 = VERTEX_POINT('',#3241);+#3241 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#3242 = SURFACE_CURVE('',#3243,(#3247,#3254),.PCURVE_S1.);+#3243 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3244,#3245,#3246),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3244 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#3245 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.6));+#3246 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#3247 = PCURVE('',#3157,#3248);+#3248 = DEFINITIONAL_REPRESENTATION('',(#3249),#3253);+#3249 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3250,#3251,#3252),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(4.712388980385,+6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3250 = CARTESIAN_POINT('',(1.15,-0.875));+#3251 = CARTESIAN_POINT('',(1.175,-0.875));+#3252 = CARTESIAN_POINT('',(1.175,-0.85));+#3253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3254 = PCURVE('',#3106,#3255); #3255 = DEFINITIONAL_REPRESENTATION('',(#3256),#3260);-#3256 = LINE('',#3257,#3258);-#3257 = CARTESIAN_POINT('',(4.712388980385,7.853981633974));-#3258 = VECTOR('',#3259,1.);-#3259 = DIRECTION('',(0.,-1.));+#3256 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3257,#3258,#3259),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.712388980385,6.28318530718),+ .PIECEWISE_BEZIER_KNOTS.);+#3257 = CARTESIAN_POINT('',(4.712388980385,5.000005E+05));+#3258 = CARTESIAN_POINT('',(3.926990816987,5.000005E+05));+#3259 = CARTESIAN_POINT('',(3.14159265359,5.000005E+05)); #3260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3261 = PCURVE('',#2147,#3262);-#3262 = DEFINITIONAL_REPRESENTATION('',(#3263),#3267);-#3263 = LINE('',#3264,#3265);-#3264 = CARTESIAN_POINT('',(3.14159265359,0.575));-#3265 = VECTOR('',#3266,1.);-#3266 = DIRECTION('',(1.,0.));-#3267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3268 = ORIENTED_EDGE('',*,*,#2104,.T.);-#3269 = ADVANCED_FACE('',(#3270),#1955,.T.);-#3270 = FACE_BOUND('',#3271,.T.);-#3271 = EDGE_LOOP('',(#3272,#3273,#3274,#3296));-#3272 = ORIENTED_EDGE('',*,*,#3219,.F.);-#3273 = ORIENTED_EDGE('',*,*,#1931,.T.);-#3274 = ORIENTED_EDGE('',*,*,#3275,.T.);-#3275 = EDGE_CURVE('',#1934,#2326,#3276,.T.);-#3276 = SURFACE_CURVE('',#3277,(#3282,#3289),.PCURVE_S1.);-#3277 = CIRCLE('',#3278,2.5E-02);-#3278 = AXIS2_PLACEMENT_3D('',#3279,#3280,#3281);-#3279 = CARTESIAN_POINT('',(0.525,0.925,-0.575));-#3280 = DIRECTION('',(0.,0.,-1.));-#3281 = DIRECTION('',(-1.,0.,0.));-#3282 = PCURVE('',#1955,#3283);-#3283 = DEFINITIONAL_REPRESENTATION('',(#3284),#3288);-#3284 = LINE('',#3285,#3286);-#3285 = CARTESIAN_POINT('',(4.712388980385,4.712388980385));-#3286 = VECTOR('',#3287,1.);-#3287 = DIRECTION('',(0.,1.));-#3288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3289 = PCURVE('',#2147,#3290);-#3290 = DEFINITIONAL_REPRESENTATION('',(#3291),#3295);-#3291 = LINE('',#3292,#3293);-#3292 = CARTESIAN_POINT('',(6.28318530718,-0.575));-#3293 = VECTOR('',#3294,1.);-#3294 = DIRECTION('',(-1.,0.));-#3295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3296 = ORIENTED_EDGE('',*,*,#2822,.T.);-#3297 = ADVANCED_FACE('',(#3298),#2147,.T.);-#3298 = FACE_BOUND('',#3299,.T.);-#3299 = EDGE_LOOP('',(#3300,#3301,#3302,#3303));-#3300 = ORIENTED_EDGE('',*,*,#3247,.F.);-#3301 = ORIENTED_EDGE('',*,*,#2348,.T.);-#3302 = ORIENTED_EDGE('',*,*,#3275,.F.);-#3303 = ORIENTED_EDGE('',*,*,#2133,.T.);-#3304 = MANIFOLD_SOLID_BREP('',#3305);-#3305 = CLOSED_SHELL('',(#3306,#3558,#3754,#3801,#3828,#3855,#3882,#3909- ,#3936,#3963));-#3306 = ADVANCED_FACE('',(#3307),#3322,.T.);-#3307 = FACE_BOUND('',#3308,.T.);-#3308 = EDGE_LOOP('',(#3309,#3349,#3377,#3410,#3438,#3471,#3499,#3532));-#3309 = ORIENTED_EDGE('',*,*,#3310,.F.);-#3310 = EDGE_CURVE('',#3311,#3313,#3315,.T.);-#3311 = VERTEX_POINT('',#3312);-#3312 = CARTESIAN_POINT('',(0.499999999982,0.925,-0.575));-#3313 = VERTEX_POINT('',#3314);-#3314 = CARTESIAN_POINT('',(0.499999999988,0.9,-0.6));-#3315 = SURFACE_CURVE('',#3316,(#3321,#3337),.PCURVE_S1.);-#3316 = CIRCLE('',#3317,2.5E-02);-#3317 = AXIS2_PLACEMENT_3D('',#3318,#3319,#3320);-#3318 = CARTESIAN_POINT('',(0.5,0.9,-0.575));-#3319 = DIRECTION('',(-1.,-0.,-1.734723475977E-16));-#3320 = DIRECTION('',(1.734723475977E-16,0.,-1.));-#3321 = PCURVE('',#3322,#3327);-#3322 = PLANE('',#3323);-#3323 = AXIS2_PLACEMENT_3D('',#3324,#3325,#3326);-#3324 = CARTESIAN_POINT('',(0.5,0.95,-0.625));-#3325 = DIRECTION('',(1.,0.,1.734723475977E-16));-#3326 = DIRECTION('',(-1.734723475977E-16,0.,1.));-#3327 = DEFINITIONAL_REPRESENTATION('',(#3328),#3336);-#3328 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3329,#3330,#3331,#3332,-#3333,#3334,#3335),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2- ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,-6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() -GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,-1.,0.5,1.)) REPRESENTATION_ITEM('') );-#3329 = CARTESIAN_POINT('',(2.5E-02,5.E-02));-#3330 = CARTESIAN_POINT('',(2.5E-02,9.330127018922E-02));-#3331 = CARTESIAN_POINT('',(6.25E-02,7.165063509461E-02));-#3332 = CARTESIAN_POINT('',(0.1,5.E-02));-#3333 = CARTESIAN_POINT('',(6.25E-02,2.834936490539E-02));-#3334 = CARTESIAN_POINT('',(2.5E-02,6.698729810778E-03));-#3335 = CARTESIAN_POINT('',(2.5E-02,5.E-02));+#3261 = ORIENTED_EDGE('',*,*,#3262,.F.);+#3262 = EDGE_CURVE('',#3263,#3240,#3265,.T.);+#3263 = VERTEX_POINT('',#3264);+#3264 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#3265 = SURFACE_CURVE('',#3266,(#3269,#3275),.PCURVE_S1.);+#3266 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3267,#3268),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-4.722420783303E-33,1.15),.PIECEWISE_BEZIER_KNOTS.);+#3267 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#3268 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#3269 = PCURVE('',#3157,#3270);+#3270 = DEFINITIONAL_REPRESENTATION('',(#3271),#3274);+#3271 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3272,#3273),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-4.722420783303E-33,1.15),.PIECEWISE_BEZIER_KNOTS.);+#3272 = CARTESIAN_POINT('',(-0.,-0.875));+#3273 = CARTESIAN_POINT('',(1.15,-0.875));+#3274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3275 = PCURVE('',#3079,#3276);+#3276 = DEFINITIONAL_REPRESENTATION('',(#3277),#3280);+#3277 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3278,#3279),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-4.722420783303E-33,1.15),.PIECEWISE_BEZIER_KNOTS.);+#3278 = CARTESIAN_POINT('',(4.336808689942E-11,-5.000005E+05));+#3279 = CARTESIAN_POINT('',(-1.149999999957,-5.000005E+05));+#3280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3281 = ORIENTED_EDGE('',*,*,#3282,.F.);+#3282 = EDGE_CURVE('',#3283,#3263,#3285,.T.);+#3283 = VERTEX_POINT('',#3284);+#3284 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#3285 = SURFACE_CURVE('',#3286,(#3290,#3297),.PCURVE_S1.);+#3286 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3287,#3288,#3289),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3287 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#3288 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.6));+#3289 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#3290 = PCURVE('',#3157,#3291);+#3291 = DEFINITIONAL_REPRESENTATION('',(#3292),#3296);+#3292 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3293,#3294,#3295),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(3.14159265359,+4.712388980385),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.707106781187,1.)) REPRESENTATION_ITEM('') );+#3293 = CARTESIAN_POINT('',(-2.5E-02,-0.85));+#3294 = CARTESIAN_POINT('',(-2.5E-02,-0.875));+#3295 = CARTESIAN_POINT('',(-0.,-0.875));+#3296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3297 = PCURVE('',#3051,#3298);+#3298 = DEFINITIONAL_REPRESENTATION('',(#3299),#3303);+#3299 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3300,#3301,#3302),+ .UNSPECIFIED.,.F.,.F.,(3,3),(3.14159265359,4.712388980385),+ .PIECEWISE_BEZIER_KNOTS.);+#3300 = CARTESIAN_POINT('',(6.28318530718,5.000005E+05));+#3301 = CARTESIAN_POINT('',(5.497787143782,5.000005E+05));+#3302 = CARTESIAN_POINT('',(4.712388980385,5.000005E+05));+#3303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3304 = ORIENTED_EDGE('',*,*,#3305,.F.);+#3305 = EDGE_CURVE('',#3149,#3283,#3306,.T.);+#3306 = SURFACE_CURVE('',#3307,(#3310,#3316),.PCURVE_S1.);+#3307 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3308,#3309),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.85),.PIECEWISE_BEZIER_KNOTS.);+#3308 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#3309 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#3310 = PCURVE('',#3157,#3311);+#3311 = DEFINITIONAL_REPRESENTATION('',(#3312),#3315);+#3312 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3313,#3314),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.85),.PIECEWISE_BEZIER_KNOTS.);+#3313 = CARTESIAN_POINT('',(-2.5E-02,0.));+#3314 = CARTESIAN_POINT('',(-2.5E-02,-0.85));+#3315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3316 = PCURVE('',#3024,#3317);+#3317 = DEFINITIONAL_REPRESENTATION('',(#3318),#3321);+#3318 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3319,#3320),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.85),.PIECEWISE_BEZIER_KNOTS.);+#3319 = CARTESIAN_POINT('',(5.531738121517E-27,-5.000005E+05));+#3320 = CARTESIAN_POINT('',(-0.85,-5.000005E+05));+#3321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3322 = ADVANCED_FACE('',(#3323),#2969,.F.);+#3323 = FACE_BOUND('',#3324,.T.);+#3324 = EDGE_LOOP('',(#3325,#3344,#3345,#3364));+#3325 = ORIENTED_EDGE('',*,*,#3326,.F.);+#3326 = EDGE_CURVE('',#2956,#3147,#3327,.T.);+#3327 = SURFACE_CURVE('',#3328,(#3331,#3337),.PCURVE_S1.);+#3328 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3329,#3330),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3329 = CARTESIAN_POINT('',(0.5,1.217104825,0.575));+#3330 = CARTESIAN_POINT('',(-0.5,1.217104825,0.575));+#3331 = PCURVE('',#2969,#3332);+#3332 = DEFINITIONAL_REPRESENTATION('',(#3333),#3336);+#3333 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3334,#3335),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3334 = CARTESIAN_POINT('',(-1.150000000043,-4.999995E+05));+#3335 = CARTESIAN_POINT('',(-1.150000000043,-5.000005E+05)); #3336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3337 = PCURVE('',#3338,#3343);-#3338 = CYLINDRICAL_SURFACE('',#3339,2.5E-02);-#3339 = AXIS2_PLACEMENT_3D('',#3340,#3341,#3342);-#3340 = CARTESIAN_POINT('',(5.E+05,0.9,-0.575000000043));-#3341 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3342 = DIRECTION('',(8.673617379884E-17,0.,1.));-#3343 = DEFINITIONAL_REPRESENTATION('',(#3344),#3348);-#3344 = LINE('',#3345,#3346);-#3345 = CARTESIAN_POINT('',(-3.14159265359,4.999995E+05));-#3346 = VECTOR('',#3347,1.);-#3347 = DIRECTION('',(1.,0.));-#3348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3349 = ORIENTED_EDGE('',*,*,#3350,.F.);-#3350 = EDGE_CURVE('',#3351,#3311,#3353,.T.);-#3351 = VERTEX_POINT('',#3352);-#3352 = CARTESIAN_POINT('',(0.499999999982,0.925,0.575));-#3353 = SURFACE_CURVE('',#3354,(#3358,#3365),.PCURVE_S1.);-#3354 = LINE('',#3355,#3356);-#3355 = CARTESIAN_POINT('',(0.5,0.925,8.673617379884E-17));-#3356 = VECTOR('',#3357,1.);-#3357 = DIRECTION('',(1.734723475977E-16,-0.,-1.));-#3358 = PCURVE('',#3322,#3359);-#3359 = DEFINITIONAL_REPRESENTATION('',(#3360),#3364);-#3360 = LINE('',#3361,#3362);-#3361 = CARTESIAN_POINT('',(0.625,2.5E-02));-#3362 = VECTOR('',#3363,1.);-#3363 = DIRECTION('',(-1.,0.));-#3364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3365 = PCURVE('',#3366,#3371);-#3366 = PLANE('',#3367);-#3367 = AXIS2_PLACEMENT_3D('',#3368,#3369,#3370);-#3368 = CARTESIAN_POINT('',(5.E+05,0.925,-0.575000000043));-#3369 = DIRECTION('',(-8.17735200572E-33,-1.,-9.427844978135E-17));-#3370 = DIRECTION('',(0.,9.427844978135E-17,-1.));-#3371 = DEFINITIONAL_REPRESENTATION('',(#3372),#3376);-#3372 = LINE('',#3373,#3374);-#3373 = CARTESIAN_POINT('',(-0.575000000043,-4.999995E+05));-#3374 = VECTOR('',#3375,1.);-#3375 = DIRECTION('',(1.,1.734723475977E-16));-#3376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3377 = ORIENTED_EDGE('',*,*,#3378,.F.);-#3378 = EDGE_CURVE('',#3379,#3351,#3381,.T.);-#3379 = VERTEX_POINT('',#3380);-#3380 = CARTESIAN_POINT('',(0.499999999982,0.9,0.6));-#3381 = SURFACE_CURVE('',#3382,(#3387,#3398),.PCURVE_S1.);-#3382 = CIRCLE('',#3383,2.5E-02);-#3383 = AXIS2_PLACEMENT_3D('',#3384,#3385,#3386);-#3384 = CARTESIAN_POINT('',(0.5,0.9,0.575));-#3385 = DIRECTION('',(-1.,-0.,-1.734723475977E-16));-#3386 = DIRECTION('',(1.734723475977E-16,0.,-1.));-#3387 = PCURVE('',#3322,#3388);-#3388 = DEFINITIONAL_REPRESENTATION('',(#3389),#3397);-#3389 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3390,#3391,#3392,#3393,-#3394,#3395,#3396),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2- ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,-6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() -GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,-1.,0.5,1.)) REPRESENTATION_ITEM('') );-#3390 = CARTESIAN_POINT('',(1.175,5.E-02));-#3391 = CARTESIAN_POINT('',(1.175,9.330127018922E-02));-#3392 = CARTESIAN_POINT('',(1.2125,7.165063509461E-02));-#3393 = CARTESIAN_POINT('',(1.25,5.E-02));-#3394 = CARTESIAN_POINT('',(1.2125,2.834936490539E-02));-#3395 = CARTESIAN_POINT('',(1.175,6.698729810778E-03));-#3396 = CARTESIAN_POINT('',(1.175,5.E-02));-#3397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3398 = PCURVE('',#3399,#3404);-#3399 = CYLINDRICAL_SURFACE('',#3400,2.5E-02);-#3400 = AXIS2_PLACEMENT_3D('',#3401,#3402,#3403);-#3401 = CARTESIAN_POINT('',(5.E+05,0.9,0.574999999957));-#3402 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3403 = DIRECTION('',(8.673617379884E-17,0.,1.));-#3404 = DEFINITIONAL_REPRESENTATION('',(#3405),#3409);-#3405 = LINE('',#3406,#3407);-#3406 = CARTESIAN_POINT('',(-3.14159265359,4.999995E+05));-#3407 = VECTOR('',#3408,1.);-#3408 = DIRECTION('',(1.,0.));-#3409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3410 = ORIENTED_EDGE('',*,*,#3411,.F.);-#3411 = EDGE_CURVE('',#3412,#3379,#3414,.T.);-#3412 = VERTEX_POINT('',#3413);-#3413 = CARTESIAN_POINT('',(0.499999999988,5.E-02,0.6));-#3414 = SURFACE_CURVE('',#3415,(#3419,#3426),.PCURVE_S1.);-#3415 = LINE('',#3416,#3417);-#3416 = CARTESIAN_POINT('',(0.5,0.95,0.6));-#3417 = VECTOR('',#3418,1.);-#3418 = DIRECTION('',(-0.,1.,-0.));-#3419 = PCURVE('',#3322,#3420);-#3420 = DEFINITIONAL_REPRESENTATION('',(#3421),#3425);-#3421 = LINE('',#3422,#3423);-#3422 = CARTESIAN_POINT('',(1.225,0.));-#3423 = VECTOR('',#3424,1.);-#3424 = DIRECTION('',(0.,-1.));-#3425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3426 = PCURVE('',#3427,#3432);-#3427 = PLANE('',#3428);-#3428 = AXIS2_PLACEMENT_3D('',#3429,#3430,#3431);-#3429 = CARTESIAN_POINT('',(5.E+05,0.9,0.599999999957));-#3430 = DIRECTION('',(-8.673617379884E-17,1.27553196763E-16,-1.));-#3431 = DIRECTION('',(0.,1.,1.27553196763E-16));-#3432 = DEFINITIONAL_REPRESENTATION('',(#3433),#3437);-#3433 = LINE('',#3434,#3435);-#3434 = CARTESIAN_POINT('',(5.E-02,-4.999995E+05));-#3435 = VECTOR('',#3436,1.);-#3436 = DIRECTION('',(1.,1.106347624303E-32));-#3437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3438 = ORIENTED_EDGE('',*,*,#3439,.F.);-#3439 = EDGE_CURVE('',#3440,#3412,#3442,.T.);-#3440 = VERTEX_POINT('',#3441);-#3441 = CARTESIAN_POINT('',(0.499999999982,2.5E-02,0.575));-#3442 = SURFACE_CURVE('',#3443,(#3448,#3459),.PCURVE_S1.);-#3443 = CIRCLE('',#3444,2.5E-02);-#3444 = AXIS2_PLACEMENT_3D('',#3445,#3446,#3447);-#3445 = CARTESIAN_POINT('',(0.5,5.E-02,0.575));-#3446 = DIRECTION('',(-1.,-0.,-1.734723475977E-16));-#3447 = DIRECTION('',(1.734723475977E-16,0.,-1.));-#3448 = PCURVE('',#3322,#3449);-#3449 = DEFINITIONAL_REPRESENTATION('',(#3450),#3458);-#3450 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3451,#3452,#3453,#3454,-#3455,#3456,#3457),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2- ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,-6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() -GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,-1.,0.5,1.)) REPRESENTATION_ITEM('') );-#3451 = CARTESIAN_POINT('',(1.175,0.9));-#3452 = CARTESIAN_POINT('',(1.175,0.943301270189));-#3453 = CARTESIAN_POINT('',(1.2125,0.921650635095));-#3454 = CARTESIAN_POINT('',(1.25,0.9));-#3455 = CARTESIAN_POINT('',(1.2125,0.878349364905));-#3456 = CARTESIAN_POINT('',(1.175,0.856698729811));-#3457 = CARTESIAN_POINT('',(1.175,0.9));-#3458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3459 = PCURVE('',#3460,#3465);-#3460 = CYLINDRICAL_SURFACE('',#3461,2.5E-02);-#3461 = AXIS2_PLACEMENT_3D('',#3462,#3463,#3464);-#3462 = CARTESIAN_POINT('',(5.E+05,5.E-02,0.574999999957));-#3463 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3464 = DIRECTION('',(8.673617379884E-17,0.,1.));-#3465 = DEFINITIONAL_REPRESENTATION('',(#3466),#3470);-#3466 = LINE('',#3467,#3468);-#3467 = CARTESIAN_POINT('',(3.14159265359,4.999995E+05));-#3468 = VECTOR('',#3469,1.);-#3469 = DIRECTION('',(1.,0.));-#3470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3471 = ORIENTED_EDGE('',*,*,#3472,.T.);-#3472 = EDGE_CURVE('',#3440,#3473,#3475,.T.);-#3473 = VERTEX_POINT('',#3474);-#3474 = CARTESIAN_POINT('',(0.499999999988,2.5E-02,-0.575));-#3475 = SURFACE_CURVE('',#3476,(#3480,#3487),.PCURVE_S1.);-#3476 = LINE('',#3477,#3478);-#3477 = CARTESIAN_POINT('',(0.499999999988,2.5E-02,0.57499999987));-#3478 = VECTOR('',#3479,1.);-#3479 = DIRECTION('',(1.734723475977E-16,-1.23740465338E-16,-1.));-#3480 = PCURVE('',#3322,#3481);-#3481 = DEFINITIONAL_REPRESENTATION('',(#3482),#3486);-#3482 = LINE('',#3483,#3484);-#3483 = CARTESIAN_POINT('',(1.19999999987,0.925));-#3484 = VECTOR('',#3485,1.);-#3485 = DIRECTION('',(-1.,1.23740465338E-16));-#3486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3487 = PCURVE('',#3488,#3493);-#3488 = PLANE('',#3489);-#3489 = AXIS2_PLACEMENT_3D('',#3490,#3491,#3492);-#3490 = CARTESIAN_POINT('',(5.E+05,2.5E-02,0.574999999957));-#3491 = DIRECTION('',(-1.073277450751E-32,1.,-1.23740465338E-16));-#3492 = DIRECTION('',(0.,1.23740465338E-16,1.));-#3493 = DEFINITIONAL_REPRESENTATION('',(#3494),#3498);-#3494 = LINE('',#3495,#3496);-#3495 = CARTESIAN_POINT('',(-8.700007381179E-11,-4.999995E+05));-#3496 = VECTOR('',#3497,1.);-#3497 = DIRECTION('',(-1.,1.734723475977E-16));-#3498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3499 = ORIENTED_EDGE('',*,*,#3500,.F.);-#3500 = EDGE_CURVE('',#3501,#3473,#3503,.T.);-#3501 = VERTEX_POINT('',#3502);-#3502 = CARTESIAN_POINT('',(0.499999999982,5.E-02,-0.6));-#3503 = SURFACE_CURVE('',#3504,(#3509,#3520),.PCURVE_S1.);-#3504 = CIRCLE('',#3505,2.5E-02);-#3505 = AXIS2_PLACEMENT_3D('',#3506,#3507,#3508);-#3506 = CARTESIAN_POINT('',(0.5,5.E-02,-0.575));-#3507 = DIRECTION('',(-1.,-0.,-1.734723475977E-16));-#3508 = DIRECTION('',(1.734723475977E-16,0.,-1.));-#3509 = PCURVE('',#3322,#3510);-#3510 = DEFINITIONAL_REPRESENTATION('',(#3511),#3519);-#3511 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3512,#3513,#3514,#3515,-#3516,#3517,#3518),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2- ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,-6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() -GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,-1.,0.5,1.)) REPRESENTATION_ITEM('') );-#3512 = CARTESIAN_POINT('',(2.5E-02,0.9));-#3513 = CARTESIAN_POINT('',(2.5E-02,0.943301270189));-#3514 = CARTESIAN_POINT('',(6.25E-02,0.921650635095));-#3515 = CARTESIAN_POINT('',(0.1,0.9));-#3516 = CARTESIAN_POINT('',(6.25E-02,0.878349364905));-#3517 = CARTESIAN_POINT('',(2.5E-02,0.856698729811));-#3518 = CARTESIAN_POINT('',(2.5E-02,0.9));-#3519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3520 = PCURVE('',#3521,#3526);-#3521 = CYLINDRICAL_SURFACE('',#3522,2.5E-02);-#3522 = AXIS2_PLACEMENT_3D('',#3523,#3524,#3525);-#3523 = CARTESIAN_POINT('',(5.E+05,5.E-02,-0.575000000043));-#3524 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3525 = DIRECTION('',(8.673617379884E-17,0.,1.));-#3526 = DEFINITIONAL_REPRESENTATION('',(#3527),#3531);-#3527 = LINE('',#3528,#3529);-#3528 = CARTESIAN_POINT('',(3.14159265359,4.999995E+05));-#3529 = VECTOR('',#3530,1.);-#3530 = DIRECTION('',(1.,0.));-#3531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3532 = ORIENTED_EDGE('',*,*,#3533,.T.);-#3533 = EDGE_CURVE('',#3501,#3313,#3534,.T.);-#3534 = SURFACE_CURVE('',#3535,(#3539,#3546),.PCURVE_S1.);-#3535 = LINE('',#3536,#3537);-#3536 = CARTESIAN_POINT('',(0.499999999988,5.E-02,-0.6));-#3537 = VECTOR('',#3538,1.);-#3538 = DIRECTION('',(-0.,1.,0.));-#3539 = PCURVE('',#3322,#3540);-#3540 = DEFINITIONAL_REPRESENTATION('',(#3541),#3545);-#3541 = LINE('',#3542,#3543);-#3542 = CARTESIAN_POINT('',(2.5E-02,0.9));-#3543 = VECTOR('',#3544,1.);-#3544 = DIRECTION('',(0.,-1.));-#3545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3546 = PCURVE('',#3547,#3552);-#3547 = PLANE('',#3548);-#3548 = AXIS2_PLACEMENT_3D('',#3549,#3550,#3551);-#3549 = CARTESIAN_POINT('',(5.E+05,5.E-02,-0.600000000043));-#3550 = DIRECTION('',(8.673617379884E-17,-0.,1.));-#3551 = DIRECTION('',(1.,0.,-8.673617379884E-17));-#3552 = DEFINITIONAL_REPRESENTATION('',(#3553),#3557);+#3337 = PCURVE('',#2996,#3338);+#3338 = DEFINITIONAL_REPRESENTATION('',(#3339),#3343);+#3339 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3340,#3341,#3342),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.999995E+05,5.000005E+05),+ .PIECEWISE_BEZIER_KNOTS.);+#3340 = CARTESIAN_POINT('',(1.570796326795,4.999995E+05));+#3341 = CARTESIAN_POINT('',(1.570796326795,5.E+05));+#3342 = CARTESIAN_POINT('',(1.570796326795,5.000005E+05));+#3343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3344 = ORIENTED_EDGE('',*,*,#2955,.T.);+#3345 = ORIENTED_EDGE('',*,*,#3346,.T.);+#3346 = EDGE_CURVE('',#2919,#3177,#3347,.T.);+#3347 = SURFACE_CURVE('',#3348,(#3351,#3357),.PCURVE_S1.);+#3348 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3349,#3350),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3349 = CARTESIAN_POINT('',(0.5,1.217104825,-0.575));+#3350 = CARTESIAN_POINT('',(-0.5,1.217104825,-0.575));+#3351 = PCURVE('',#2969,#3352);+#3352 = DEFINITIONAL_REPRESENTATION('',(#3353),#3356);+#3353 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3354,#3355),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3354 = CARTESIAN_POINT('',(-4.336808689942E-11,-4.999995E+05));+#3355 = CARTESIAN_POINT('',(-4.336808689942E-11,-5.000005E+05));+#3356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3357 = PCURVE('',#2941,#3358);+#3358 = DEFINITIONAL_REPRESENTATION('',(#3359),#3363);+#3359 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3360,#3361,#3362),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.999995E+05,5.000005E+05),+ .PIECEWISE_BEZIER_KNOTS.);+#3360 = CARTESIAN_POINT('',(1.570796326795,4.999995E+05));+#3361 = CARTESIAN_POINT('',(1.570796326795,5.E+05));+#3362 = CARTESIAN_POINT('',(1.570796326795,5.000005E+05));+#3363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3364 = ORIENTED_EDGE('',*,*,#3176,.T.);+#3365 = ADVANCED_FACE('',(#3366),#2941,.T.);+#3366 = FACE_BOUND('',#3367,.T.);+#3367 = EDGE_LOOP('',(#3368,#3369,#3370,#3389));+#3368 = ORIENTED_EDGE('',*,*,#3346,.F.);+#3369 = ORIENTED_EDGE('',*,*,#2918,.T.);+#3370 = ORIENTED_EDGE('',*,*,#3371,.T.);+#3371 = EDGE_CURVE('',#2921,#3197,#3372,.T.);+#3372 = SURFACE_CURVE('',#3373,(#3376,#3383),.PCURVE_S1.);+#3373 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3374,#3375),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3374 = CARTESIAN_POINT('',(0.5,1.1842101,-0.6));+#3375 = CARTESIAN_POINT('',(-0.5,1.1842101,-0.6));+#3376 = PCURVE('',#2941,#3377);+#3377 = DEFINITIONAL_REPRESENTATION('',(#3378),#3382);+#3378 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3379,#3380,#3381),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.999995E+05,5.000005E+05),+ .PIECEWISE_BEZIER_KNOTS.);+#3379 = CARTESIAN_POINT('',(3.14159265359,4.999995E+05));+#3380 = CARTESIAN_POINT('',(3.14159265359,5.E+05));+#3381 = CARTESIAN_POINT('',(3.14159265359,5.000005E+05));+#3382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3383 = PCURVE('',#3132,#3384);+#3384 = DEFINITIONAL_REPRESENTATION('',(#3385),#3388);+#3385 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3386,#3387),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3386 = CARTESIAN_POINT('',(-4.999995E+05,0.85));+#3387 = CARTESIAN_POINT('',(-5.000005E+05,0.85));+#3388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3389 = ORIENTED_EDGE('',*,*,#3196,.T.);+#3390 = ADVANCED_FACE('',(#3391),#3132,.F.);+#3391 = FACE_BOUND('',#3392,.T.);+#3392 = EDGE_LOOP('',(#3393,#3394,#3413,#3414));+#3393 = ORIENTED_EDGE('',*,*,#3120,.F.);+#3394 = ORIENTED_EDGE('',*,*,#3395,.T.);+#3395 = EDGE_CURVE('',#3091,#3220,#3396,.T.);+#3396 = SURFACE_CURVE('',#3397,(#3400,#3406),.PCURVE_S1.);+#3397 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3398,#3399),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3398 = CARTESIAN_POINT('',(0.5,6.578945E-02,-0.6));+#3399 = CARTESIAN_POINT('',(-0.5,6.578945E-02,-0.6));+#3400 = PCURVE('',#3132,#3401);+#3401 = DEFINITIONAL_REPRESENTATION('',(#3402),#3405);+#3402 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3403,#3404),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3403 = CARTESIAN_POINT('',(-4.999995E+05,0.));+#3404 = CARTESIAN_POINT('',(-5.000005E+05,0.));+#3405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3406 = PCURVE('',#3106,#3407);+#3407 = DEFINITIONAL_REPRESENTATION('',(#3408),#3412);+#3408 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3409,#3410,#3411),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.999995E+05,5.000005E+05),+ .PIECEWISE_BEZIER_KNOTS.);+#3409 = CARTESIAN_POINT('',(3.14159265359,4.999995E+05));+#3410 = CARTESIAN_POINT('',(3.14159265359,5.E+05));+#3411 = CARTESIAN_POINT('',(3.14159265359,5.000005E+05));+#3412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3413 = ORIENTED_EDGE('',*,*,#3219,.T.);+#3414 = ORIENTED_EDGE('',*,*,#3371,.F.);+#3415 = ADVANCED_FACE('',(#3416),#3106,.T.);+#3416 = FACE_BOUND('',#3417,.T.);+#3417 = EDGE_LOOP('',(#3418,#3419,#3420,#3439));+#3418 = ORIENTED_EDGE('',*,*,#3395,.F.);+#3419 = ORIENTED_EDGE('',*,*,#3090,.T.);+#3420 = ORIENTED_EDGE('',*,*,#3421,.T.);+#3421 = EDGE_CURVE('',#3066,#3240,#3422,.T.);+#3422 = SURFACE_CURVE('',#3423,(#3426,#3433),.PCURVE_S1.);+#3423 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3424,#3425),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3424 = CARTESIAN_POINT('',(0.5,3.2894725E-02,-0.575));+#3425 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,-0.575));+#3426 = PCURVE('',#3106,#3427);+#3427 = DEFINITIONAL_REPRESENTATION('',(#3428),#3432);+#3428 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3429,#3430,#3431),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.999995E+05,5.000005E+05),+ .PIECEWISE_BEZIER_KNOTS.);+#3429 = CARTESIAN_POINT('',(4.712388980385,4.999995E+05));+#3430 = CARTESIAN_POINT('',(4.712388980385,5.E+05));+#3431 = CARTESIAN_POINT('',(4.712388980385,5.000005E+05));+#3432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3433 = PCURVE('',#3079,#3434);+#3434 = DEFINITIONAL_REPRESENTATION('',(#3435),#3438);+#3435 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3436,#3437),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3436 = CARTESIAN_POINT('',(-1.149999999957,-4.999995E+05));+#3437 = CARTESIAN_POINT('',(-1.149999999957,-5.000005E+05));+#3438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3439 = ORIENTED_EDGE('',*,*,#3239,.T.);+#3440 = ADVANCED_FACE('',(#3441),#3079,.F.);+#3441 = FACE_BOUND('',#3442,.T.);+#3442 = EDGE_LOOP('',(#3443,#3444,#3463,#3464));+#3443 = ORIENTED_EDGE('',*,*,#3065,.F.);+#3444 = ORIENTED_EDGE('',*,*,#3445,.T.);+#3445 = EDGE_CURVE('',#3036,#3263,#3446,.T.);+#3446 = SURFACE_CURVE('',#3447,(#3450,#3456),.PCURVE_S1.);+#3447 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3448,#3449),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3448 = CARTESIAN_POINT('',(0.5,3.2894725E-02,0.575));+#3449 = CARTESIAN_POINT('',(-0.5,3.2894725E-02,0.575));+#3450 = PCURVE('',#3079,#3451);+#3451 = DEFINITIONAL_REPRESENTATION('',(#3452),#3455);+#3452 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3453,#3454),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3453 = CARTESIAN_POINT('',(4.336808689942E-11,-4.999995E+05));+#3454 = CARTESIAN_POINT('',(4.336808689942E-11,-5.000005E+05));+#3455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3456 = PCURVE('',#3051,#3457);+#3457 = DEFINITIONAL_REPRESENTATION('',(#3458),#3462);+#3458 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3459,#3460,#3461),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.999995E+05,5.000005E+05),+ .PIECEWISE_BEZIER_KNOTS.);+#3459 = CARTESIAN_POINT('',(4.712388980385,4.999995E+05));+#3460 = CARTESIAN_POINT('',(4.712388980385,5.E+05));+#3461 = CARTESIAN_POINT('',(4.712388980385,5.000005E+05));+#3462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3463 = ORIENTED_EDGE('',*,*,#3262,.T.);+#3464 = ORIENTED_EDGE('',*,*,#3421,.F.);+#3465 = ADVANCED_FACE('',(#3466),#3051,.T.);+#3466 = FACE_BOUND('',#3467,.T.);+#3467 = EDGE_LOOP('',(#3468,#3469,#3470,#3489));+#3468 = ORIENTED_EDGE('',*,*,#3445,.F.);+#3469 = ORIENTED_EDGE('',*,*,#3035,.T.);+#3470 = ORIENTED_EDGE('',*,*,#3471,.T.);+#3471 = EDGE_CURVE('',#3011,#3283,#3472,.T.);+#3472 = SURFACE_CURVE('',#3473,(#3476,#3483),.PCURVE_S1.);+#3473 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3474,#3475),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3474 = CARTESIAN_POINT('',(0.5,6.578945E-02,0.6));+#3475 = CARTESIAN_POINT('',(-0.5,6.578945E-02,0.6));+#3476 = PCURVE('',#3051,#3477);+#3477 = DEFINITIONAL_REPRESENTATION('',(#3478),#3482);+#3478 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3479,#3480,#3481),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.999995E+05,5.000005E+05),+ .PIECEWISE_BEZIER_KNOTS.);+#3479 = CARTESIAN_POINT('',(6.28318530718,4.999995E+05));+#3480 = CARTESIAN_POINT('',(6.28318530718,5.E+05));+#3481 = CARTESIAN_POINT('',(6.28318530718,5.000005E+05));+#3482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3483 = PCURVE('',#3024,#3484);+#3484 = DEFINITIONAL_REPRESENTATION('',(#3485),#3488);+#3485 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3486,#3487),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3486 = CARTESIAN_POINT('',(-0.85,-4.999995E+05));+#3487 = CARTESIAN_POINT('',(-0.85,-5.000005E+05));+#3488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3489 = ORIENTED_EDGE('',*,*,#3282,.T.);+#3490 = ADVANCED_FACE('',(#3491),#3024,.F.);+#3491 = FACE_BOUND('',#3492,.T.);+#3492 = EDGE_LOOP('',(#3493,#3494,#3495,#3514));+#3493 = ORIENTED_EDGE('',*,*,#3471,.F.);+#3494 = ORIENTED_EDGE('',*,*,#3010,.T.);+#3495 = ORIENTED_EDGE('',*,*,#3496,.T.);+#3496 = EDGE_CURVE('',#2981,#3149,#3497,.T.);+#3497 = SURFACE_CURVE('',#3498,(#3501,#3507),.PCURVE_S1.);+#3498 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3499,#3500),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3499 = CARTESIAN_POINT('',(0.5,1.1842101,0.6));+#3500 = CARTESIAN_POINT('',(-0.5,1.1842101,0.6));+#3501 = PCURVE('',#3024,#3502);+#3502 = DEFINITIONAL_REPRESENTATION('',(#3503),#3506);+#3503 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3504,#3505),.UNSPECIFIED.,.F.,+ .F.,(2,2),(4.999995E+05,5.000005E+05),.PIECEWISE_BEZIER_KNOTS.);+#3504 = CARTESIAN_POINT('',(5.531738121517E-27,-4.999995E+05));+#3505 = CARTESIAN_POINT('',(5.531738121517E-27,-5.000005E+05));+#3506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3507 = PCURVE('',#2996,#3508);+#3508 = DEFINITIONAL_REPRESENTATION('',(#3509),#3513);+#3509 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3510,#3511,#3512),+ .UNSPECIFIED.,.F.,.F.,(3,3),(4.999995E+05,5.000005E+05),+ .PIECEWISE_BEZIER_KNOTS.);+#3510 = CARTESIAN_POINT('',(0.,4.999995E+05));+#3511 = CARTESIAN_POINT('',(0.,5.E+05));+#3512 = CARTESIAN_POINT('',(0.,5.000005E+05));+#3513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3514 = ORIENTED_EDGE('',*,*,#3305,.T.);+#3515 = ADVANCED_FACE('',(#3516),#2996,.T.);+#3516 = FACE_BOUND('',#3517,.T.);+#3517 = EDGE_LOOP('',(#3518,#3519,#3520,#3521));+#3518 = ORIENTED_EDGE('',*,*,#3496,.F.);+#3519 = ORIENTED_EDGE('',*,*,#2980,.T.);+#3520 = ORIENTED_EDGE('',*,*,#3326,.T.);+#3521 = ORIENTED_EDGE('',*,*,#3146,.T.);+#3522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3526)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#3523,#3524,#3525)) REPRESENTATION_CONTEXT+('Context #1','3D Context with UNIT and UNCERTAINTY') );+#3523 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#3524 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#3525 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#3526 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#3523,+ 'distance_accuracy_value','confusion accuracy');+#3527 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3528,#3530);+#3528 = ( REPRESENTATION_RELATIONSHIP('','',#59,#36) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3529) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#3529 = ITEM_DEFINED_TRANSFORMATION('','',#11,#37);+#3530 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+ #3531);+#3531 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','=>[0:1:1:1]','',#31,#54,$);+#3532 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#56));+#3533 = SHAPE_DEFINITION_REPRESENTATION(#3534,#3540);+#3534 = PRODUCT_DEFINITION_SHAPE('','',#3535);+#3535 = PRODUCT_DEFINITION('design','',#3536,#3539);+#3536 = PRODUCT_DEFINITION_FORMATION('','',#3537);+#3537 = PRODUCT('laser_etch','laser_etch','',(#3538));+#3538 = PRODUCT_CONTEXT('',#2,'mechanical');+#3539 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#3540 = SHAPE_REPRESENTATION('',(#11,#3541,#3839,#3945,#4291,#4477,#4665+ ,#5011,#5357,#5769,#5987,#6255,#6603,#6773,#6943,#7113),#7315);+#3541 = SHELL_BASED_SURFACE_MODEL('',(#3542));+#3542 = OPEN_SHELL('',(#3543));+#3543 = ADVANCED_FACE('',(#3544),#3558,.T.);+#3544 = FACE_BOUND('',#3545,.F.);+#3545 = EDGE_LOOP('',(#3546,#3569,#3585,#3601,#3617,#3633,#3649,#3665,+ #3681,#3697,#3713,#3729,#3745,#3761,#3777,#3793,#3809,#3825));+#3546 = ORIENTED_EDGE('',*,*,#3547,.T.);+#3547 = EDGE_CURVE('',#3548,#3550,#3552,.T.);+#3548 = VERTEX_POINT('',#3549);+#3549 = CARTESIAN_POINT('',(-0.372535844545,0.60453753337,0.59710515));+#3550 = VERTEX_POINT('',#3551);+#3551 = CARTESIAN_POINT('',(-0.372535844545,0.595103938677,0.59710515));+#3552 = SURFACE_CURVE('',#3553,(#3557),.PCURVE_S1.); #3553 = LINE('',#3554,#3555);-#3554 = CARTESIAN_POINT('',(-4.999995E+05,0.));+#3554 = CARTESIAN_POINT('',(-0.372535844545,0.60453753337,0.59710515)); #3555 = VECTOR('',#3556,1.);-#3556 = DIRECTION('',(0.,1.));-#3557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3558 = ADVANCED_FACE('',(#3559),#3574,.F.);-#3559 = FACE_BOUND('',#3560,.T.);-#3560 = EDGE_LOOP('',(#3561,#3592,#3615,#3639,#3662,#3686,#3709,#3733));-#3561 = ORIENTED_EDGE('',*,*,#3562,.F.);-#3562 = EDGE_CURVE('',#3563,#3565,#3567,.T.);-#3563 = VERTEX_POINT('',#3564);-#3564 = CARTESIAN_POINT('',(-0.5,0.925,0.575));-#3565 = VERTEX_POINT('',#3566);-#3566 = CARTESIAN_POINT('',(-0.5,0.9,0.6));-#3567 = SURFACE_CURVE('',#3568,(#3573,#3585),.PCURVE_S1.);-#3568 = CIRCLE('',#3569,2.5E-02);-#3569 = AXIS2_PLACEMENT_3D('',#3570,#3571,#3572);-#3570 = CARTESIAN_POINT('',(-0.5,0.9,0.575));-#3571 = DIRECTION('',(1.,0.,-8.673617379884E-17));-#3572 = DIRECTION('',(-8.673617379884E-17,-0.,-1.));-#3573 = PCURVE('',#3574,#3579);-#3574 = PLANE('',#3575);-#3575 = AXIS2_PLACEMENT_3D('',#3576,#3577,#3578);-#3576 = CARTESIAN_POINT('',(-0.5,0.9,0.575));-#3577 = DIRECTION('',(1.,0.,-8.673617379884E-17));-#3578 = DIRECTION('',(-8.673617379884E-17,0.,-1.));+#3556 = DIRECTION('',(0.,-1.,0.));+#3557 = PCURVE('',#3558,#3563);+#3558 = PLANE('',#3559);+#3559 = AXIS2_PLACEMENT_3D('',#3560,#3561,#3562);+#3560 = CARTESIAN_POINT('',(-0.421435589019,0.592688573852,0.59710515));+#3561 = DIRECTION('',(0.,0.,1.));+#3562 = DIRECTION('',(1.,0.,-0.));+#3563 = DEFINITIONAL_REPRESENTATION('',(#3564),#3568);+#3564 = LINE('',#3565,#3566);+#3565 = CARTESIAN_POINT('',(4.8899744474E-02,1.1848959518E-02));+#3566 = VECTOR('',#3567,1.);+#3567 = DIRECTION('',(0.,-1.));+#3568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3569 = ORIENTED_EDGE('',*,*,#3570,.T.);+#3570 = EDGE_CURVE('',#3550,#3571,#3573,.T.);+#3571 = VERTEX_POINT('',#3572);+#3572 = CARTESIAN_POINT('',(-0.379736366099,0.592301204022,0.59710515));+#3573 = SURFACE_CURVE('',#3574,(#3578),.PCURVE_S1.);+#3574 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3575,#3576,#3577),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3575 = CARTESIAN_POINT('',(-0.372535844545,0.595103938677,0.59710515));+#3576 = CARTESIAN_POINT('',(-0.376044959479,0.593235448907,0.59710515));+#3577 = CARTESIAN_POINT('',(-0.379736366099,0.592301204022,0.59710515));+#3578 = PCURVE('',#3558,#3579); #3579 = DEFINITIONAL_REPRESENTATION('',(#3580),#3584);-#3580 = CIRCLE('',#3581,2.5E-02);-#3581 = AXIS2_PLACEMENT_2D('',#3582,#3583);-#3582 = CARTESIAN_POINT('',(0.,0.));-#3583 = DIRECTION('',(1.,-0.));+#3580 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3581,#3582,#3583),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3581 = CARTESIAN_POINT('',(4.8899744474E-02,2.415364825E-03));+#3582 = CARTESIAN_POINT('',(4.539062954E-02,5.46875055E-04));+#3583 = CARTESIAN_POINT('',(4.169922292E-02,-3.8736983E-04)); #3584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3585 = PCURVE('',#3399,#3586);-#3586 = DEFINITIONAL_REPRESENTATION('',(#3587),#3591);-#3587 = LINE('',#3588,#3589);-#3588 = CARTESIAN_POINT('',(3.14159265359,5.000005E+05));-#3589 = VECTOR('',#3590,1.);-#3590 = DIRECTION('',(-1.,0.));-#3591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3592 = ORIENTED_EDGE('',*,*,#3593,.F.);-#3593 = EDGE_CURVE('',#3594,#3563,#3596,.T.);-#3594 = VERTEX_POINT('',#3595);-#3595 = CARTESIAN_POINT('',(-0.5,0.925,-0.575));-#3596 = SURFACE_CURVE('',#3597,(#3601,#3608),.PCURVE_S1.);-#3597 = LINE('',#3598,#3599);-#3598 = CARTESIAN_POINT('',(-0.5,0.925,-0.575));-#3599 = VECTOR('',#3600,1.);-#3600 = DIRECTION('',(0.,-9.427844978135E-17,1.));-#3601 = PCURVE('',#3574,#3602);-#3602 = DEFINITIONAL_REPRESENTATION('',(#3603),#3607);-#3603 = LINE('',#3604,#3605);-#3604 = CARTESIAN_POINT('',(1.15,2.5E-02));-#3605 = VECTOR('',#3606,1.);-#3606 = DIRECTION('',(-1.,-9.427844978135E-17));-#3607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3608 = PCURVE('',#3366,#3609);-#3609 = DEFINITIONAL_REPRESENTATION('',(#3610),#3614);-#3610 = LINE('',#3611,#3612);-#3611 = CARTESIAN_POINT('',(-4.300004796676E-11,-5.000005E+05));-#3612 = VECTOR('',#3613,1.);-#3613 = DIRECTION('',(-1.,0.));-#3614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3615 = ORIENTED_EDGE('',*,*,#3616,.F.);-#3616 = EDGE_CURVE('',#3617,#3594,#3619,.T.);-#3617 = VERTEX_POINT('',#3618);-#3618 = CARTESIAN_POINT('',(-0.5,0.9,-0.6));-#3619 = SURFACE_CURVE('',#3620,(#3625,#3632),.PCURVE_S1.);-#3620 = CIRCLE('',#3621,2.5E-02);-#3621 = AXIS2_PLACEMENT_3D('',#3622,#3623,#3624);-#3622 = CARTESIAN_POINT('',(-0.5,0.9,-0.575));-#3623 = DIRECTION('',(1.,0.,-8.673617379884E-17));-#3624 = DIRECTION('',(-8.673617379884E-17,-0.,-1.));-#3625 = PCURVE('',#3574,#3626);-#3626 = DEFINITIONAL_REPRESENTATION('',(#3627),#3631);-#3627 = CIRCLE('',#3628,2.5E-02);-#3628 = AXIS2_PLACEMENT_2D('',#3629,#3630);-#3629 = CARTESIAN_POINT('',(1.15,0.));-#3630 = DIRECTION('',(1.,-0.));-#3631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3632 = PCURVE('',#3338,#3633);-#3633 = DEFINITIONAL_REPRESENTATION('',(#3634),#3638);-#3634 = LINE('',#3635,#3636);-#3635 = CARTESIAN_POINT('',(3.14159265359,5.000005E+05));-#3636 = VECTOR('',#3637,1.);-#3637 = DIRECTION('',(-1.,0.));-#3638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3639 = ORIENTED_EDGE('',*,*,#3640,.F.);-#3640 = EDGE_CURVE('',#3641,#3617,#3643,.T.);-#3641 = VERTEX_POINT('',#3642);-#3642 = CARTESIAN_POINT('',(-0.5,5.E-02,-0.6));-#3643 = SURFACE_CURVE('',#3644,(#3648,#3655),.PCURVE_S1.);-#3644 = LINE('',#3645,#3646);-#3645 = CARTESIAN_POINT('',(-0.5,5.E-02,-0.6));-#3646 = VECTOR('',#3647,1.);-#3647 = DIRECTION('',(0.,1.,0.));-#3648 = PCURVE('',#3574,#3649);-#3649 = DEFINITIONAL_REPRESENTATION('',(#3650),#3654);-#3650 = LINE('',#3651,#3652);-#3651 = CARTESIAN_POINT('',(1.175,-0.85));-#3652 = VECTOR('',#3653,1.);-#3653 = DIRECTION('',(0.,1.));-#3654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3655 = PCURVE('',#3547,#3656);-#3656 = DEFINITIONAL_REPRESENTATION('',(#3657),#3661);-#3657 = LINE('',#3658,#3659);-#3658 = CARTESIAN_POINT('',(-5.000005E+05,0.));-#3659 = VECTOR('',#3660,1.);-#3660 = DIRECTION('',(0.,1.));-#3661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3662 = ORIENTED_EDGE('',*,*,#3663,.F.);-#3663 = EDGE_CURVE('',#3664,#3641,#3666,.T.);-#3664 = VERTEX_POINT('',#3665);-#3665 = CARTESIAN_POINT('',(-0.5,2.5E-02,-0.575));-#3666 = SURFACE_CURVE('',#3667,(#3672,#3679),.PCURVE_S1.);-#3667 = CIRCLE('',#3668,2.5E-02);-#3668 = AXIS2_PLACEMENT_3D('',#3669,#3670,#3671);-#3669 = CARTESIAN_POINT('',(-0.5,5.E-02,-0.575));-#3670 = DIRECTION('',(1.,0.,-8.673617379884E-17));-#3671 = DIRECTION('',(-8.673617379884E-17,-0.,-1.));-#3672 = PCURVE('',#3574,#3673);-#3673 = DEFINITIONAL_REPRESENTATION('',(#3674),#3678);-#3674 = CIRCLE('',#3675,2.5E-02);-#3675 = AXIS2_PLACEMENT_2D('',#3676,#3677);-#3676 = CARTESIAN_POINT('',(1.15,-0.85));-#3677 = DIRECTION('',(1.,-0.));-#3678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3679 = PCURVE('',#3521,#3680);-#3680 = DEFINITIONAL_REPRESENTATION('',(#3681),#3685);-#3681 = LINE('',#3682,#3683);-#3682 = CARTESIAN_POINT('',(9.424777960769,5.000005E+05));-#3683 = VECTOR('',#3684,1.);-#3684 = DIRECTION('',(-1.,0.));-#3685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3686 = ORIENTED_EDGE('',*,*,#3687,.F.);-#3687 = EDGE_CURVE('',#3688,#3664,#3690,.T.);-#3688 = VERTEX_POINT('',#3689);-#3689 = CARTESIAN_POINT('',(-0.5,2.5E-02,0.575));-#3690 = SURFACE_CURVE('',#3691,(#3695,#3702),.PCURVE_S1.);-#3691 = LINE('',#3692,#3693);-#3692 = CARTESIAN_POINT('',(-0.5,2.5E-02,0.575));-#3693 = VECTOR('',#3694,1.);-#3694 = DIRECTION('',(0.,-1.23740465338E-16,-1.));-#3695 = PCURVE('',#3574,#3696);-#3696 = DEFINITIONAL_REPRESENTATION('',(#3697),#3701);-#3697 = LINE('',#3698,#3699);-#3698 = CARTESIAN_POINT('',(-0.,-0.875));-#3699 = VECTOR('',#3700,1.);-#3700 = DIRECTION('',(1.,-1.23740465338E-16));-#3701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3702 = PCURVE('',#3488,#3703);-#3703 = DEFINITIONAL_REPRESENTATION('',(#3704),#3708);-#3704 = LINE('',#3705,#3706);-#3705 = CARTESIAN_POINT('',(4.299993694445E-11,-5.000005E+05));-#3706 = VECTOR('',#3707,1.);-#3707 = DIRECTION('',(-1.,0.));-#3708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3709 = ORIENTED_EDGE('',*,*,#3710,.F.);-#3710 = EDGE_CURVE('',#3711,#3688,#3713,.T.);-#3711 = VERTEX_POINT('',#3712);-#3712 = CARTESIAN_POINT('',(-0.5,5.E-02,0.6));-#3713 = SURFACE_CURVE('',#3714,(#3719,#3726),.PCURVE_S1.);-#3714 = CIRCLE('',#3715,2.5E-02);-#3715 = AXIS2_PLACEMENT_3D('',#3716,#3717,#3718);-#3716 = CARTESIAN_POINT('',(-0.5,5.E-02,0.575));-#3717 = DIRECTION('',(1.,0.,-8.673617379884E-17));-#3718 = DIRECTION('',(-8.673617379884E-17,-0.,-1.));-#3719 = PCURVE('',#3574,#3720);-#3720 = DEFINITIONAL_REPRESENTATION('',(#3721),#3725);-#3721 = CIRCLE('',#3722,2.5E-02);-#3722 = AXIS2_PLACEMENT_2D('',#3723,#3724);-#3723 = CARTESIAN_POINT('',(0.,-0.85));-#3724 = DIRECTION('',(1.,-0.));-#3725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3726 = PCURVE('',#3460,#3727);-#3727 = DEFINITIONAL_REPRESENTATION('',(#3728),#3732);-#3728 = LINE('',#3729,#3730);-#3729 = CARTESIAN_POINT('',(9.424777960769,5.000005E+05));-#3730 = VECTOR('',#3731,1.);-#3731 = DIRECTION('',(-1.,0.));-#3732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3733 = ORIENTED_EDGE('',*,*,#3734,.F.);-#3734 = EDGE_CURVE('',#3565,#3711,#3735,.T.);-#3735 = SURFACE_CURVE('',#3736,(#3740,#3747),.PCURVE_S1.);-#3736 = LINE('',#3737,#3738);-#3737 = CARTESIAN_POINT('',(-0.5,0.9,0.6));-#3738 = VECTOR('',#3739,1.);-#3739 = DIRECTION('',(0.,-1.,-1.27553196763E-16));-#3740 = PCURVE('',#3574,#3741);-#3741 = DEFINITIONAL_REPRESENTATION('',(#3742),#3746);-#3742 = LINE('',#3743,#3744);-#3743 = CARTESIAN_POINT('',(-2.5E-02,0.));-#3744 = VECTOR('',#3745,1.);-#3745 = DIRECTION('',(1.27553196763E-16,-1.));-#3746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3747 = PCURVE('',#3427,#3748);-#3748 = DEFINITIONAL_REPRESENTATION('',(#3749),#3753);-#3749 = LINE('',#3750,#3751);-#3750 = CARTESIAN_POINT('',(5.531738121517E-27,-5.000005E+05));-#3751 = VECTOR('',#3752,1.);-#3752 = DIRECTION('',(-1.,0.));-#3753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3754 = ADVANCED_FACE('',(#3755),#3366,.F.);-#3755 = FACE_BOUND('',#3756,.T.);-#3756 = EDGE_LOOP('',(#3757,#3778,#3779,#3800));-#3757 = ORIENTED_EDGE('',*,*,#3758,.F.);-#3758 = EDGE_CURVE('',#3351,#3563,#3759,.T.);-#3759 = SURFACE_CURVE('',#3760,(#3764,#3771),.PCURVE_S1.);-#3760 = LINE('',#3761,#3762);-#3761 = CARTESIAN_POINT('',(5.E+05,0.925,0.574999999957));-#3762 = VECTOR('',#3763,1.);-#3763 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3764 = PCURVE('',#3366,#3765);-#3765 = DEFINITIONAL_REPRESENTATION('',(#3766),#3770);-#3766 = LINE('',#3767,#3768);-#3767 = CARTESIAN_POINT('',(-1.15,2.127816674346E-50));-#3768 = VECTOR('',#3769,1.);-#3769 = DIRECTION('',(-8.673617379884E-17,-1.));-#3770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3771 = PCURVE('',#3399,#3772);-#3772 = DEFINITIONAL_REPRESENTATION('',(#3773),#3777);-#3773 = LINE('',#3774,#3775);-#3774 = CARTESIAN_POINT('',(1.570796326795,0.));-#3775 = VECTOR('',#3776,1.);-#3776 = DIRECTION('',(0.,1.));-#3777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3778 = ORIENTED_EDGE('',*,*,#3350,.T.);-#3779 = ORIENTED_EDGE('',*,*,#3780,.T.);-#3780 = EDGE_CURVE('',#3311,#3594,#3781,.T.);-#3781 = SURFACE_CURVE('',#3782,(#3786,#3793),.PCURVE_S1.);-#3782 = LINE('',#3783,#3784);-#3783 = CARTESIAN_POINT('',(5.E+05,0.925,-0.575000000043));-#3784 = VECTOR('',#3785,1.);-#3785 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3786 = PCURVE('',#3366,#3787);+#3585 = ORIENTED_EDGE('',*,*,#3586,.T.);+#3586 = EDGE_CURVE('',#3571,#3587,#3589,.T.);+#3587 = VERTEX_POINT('',#3588);+#3588 = CARTESIAN_POINT('',(-0.387574908549,0.591366959137,0.59710515));+#3589 = SURFACE_CURVE('',#3590,(#3594),.PCURVE_S1.);+#3590 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3591,#3592,#3593),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3591 = CARTESIAN_POINT('',(-0.379736366099,0.592301204022,0.59710515));+#3592 = CARTESIAN_POINT('',(-0.383427772718,0.591366959137,0.59710515));+#3593 = CARTESIAN_POINT('',(-0.387574908549,0.591366959137,0.59710515));+#3594 = PCURVE('',#3558,#3595);+#3595 = DEFINITIONAL_REPRESENTATION('',(#3596),#3600);+#3596 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3597,#3598,#3599),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3597 = CARTESIAN_POINT('',(4.169922292E-02,-3.8736983E-04));+#3598 = CARTESIAN_POINT('',(3.8007816301E-02,-1.321614715E-03));+#3599 = CARTESIAN_POINT('',(3.386068047E-02,-1.321614715E-03));+#3600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3601 = ORIENTED_EDGE('',*,*,#3602,.T.);+#3602 = EDGE_CURVE('',#3587,#3603,#3605,.T.);+#3603 = VERTEX_POINT('',#3604);+#3604 = CARTESIAN_POINT('',(-0.407877644954,0.600618262145,0.59710515));+#3605 = SURFACE_CURVE('',#3606,(#3610),.PCURVE_S1.);+#3606 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3607,#3608,#3609),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3607 = CARTESIAN_POINT('',(-0.387574908549,0.591366959137,0.59710515));+#3608 = CARTESIAN_POINT('',(-0.40065433694,0.591366959137,0.59710515));+#3609 = CARTESIAN_POINT('',(-0.407877644954,0.600618262145,0.59710515));+#3610 = PCURVE('',#3558,#3611);+#3611 = DEFINITIONAL_REPRESENTATION('',(#3612),#3616);+#3612 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3613,#3614,#3615),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3613 = CARTESIAN_POINT('',(3.386068047E-02,-1.321614715E-03));+#3614 = CARTESIAN_POINT('',(2.0781252079E-02,-1.321614715E-03));+#3615 = CARTESIAN_POINT('',(1.3557944065E-02,7.929688293E-03));+#3616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3617 = ORIENTED_EDGE('',*,*,#3618,.T.);+#3618 = EDGE_CURVE('',#3603,#3619,#3621,.T.);+#3619 = VERTEX_POINT('',#3620);+#3620 = CARTESIAN_POINT('',(-0.415100952968,0.626640400164,0.59710515));+#3621 = SURFACE_CURVE('',#3622,(#3626),.PCURVE_S1.);+#3622 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3623,#3624,#3625),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3623 = CARTESIAN_POINT('',(-0.407877644954,0.600618262145,0.59710515));+#3624 = CARTESIAN_POINT('',(-0.415100952968,0.609869565154,0.59710515));+#3625 = CARTESIAN_POINT('',(-0.415100952968,0.626640400164,0.59710515));+#3626 = PCURVE('',#3558,#3627);+#3627 = DEFINITIONAL_REPRESENTATION('',(#3628),#3632);+#3628 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3629,#3630,#3631),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3629 = CARTESIAN_POINT('',(1.3557944065E-02,7.929688293E-03));+#3630 = CARTESIAN_POINT('',(6.334636051E-03,1.7180991302E-02));+#3631 = CARTESIAN_POINT('',(6.334636051E-03,3.3951826312E-02));+#3632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3633 = ORIENTED_EDGE('',*,*,#3634,.T.);+#3634 = EDGE_CURVE('',#3619,#3635,#3637,.T.);+#3635 = VERTEX_POINT('',#3636);+#3636 = CARTESIAN_POINT('',(-0.407832072033,0.652639751722,0.59710515));+#3637 = SURFACE_CURVE('',#3638,(#3642),.PCURVE_S1.);+#3638 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3639,#3640,#3641),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3639 = CARTESIAN_POINT('',(-0.415100952968,0.626640400164,0.59710515));+#3640 = CARTESIAN_POINT('',(-0.415100952968,0.643320089332,0.59710515));+#3641 = CARTESIAN_POINT('',(-0.407832072033,0.652639751722,0.59710515));+#3642 = PCURVE('',#3558,#3643);+#3643 = DEFINITIONAL_REPRESENTATION('',(#3644),#3648);+#3644 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3645,#3646,#3647),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3645 = CARTESIAN_POINT('',(6.334636051E-03,3.3951826312E-02));+#3646 = CARTESIAN_POINT('',(6.334636051E-03,5.063151548E-02));+#3647 = CARTESIAN_POINT('',(1.3603516986E-02,5.995117787E-02));+#3648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3649 = ORIENTED_EDGE('',*,*,#3650,.T.);+#3650 = EDGE_CURVE('',#3635,#3651,#3653,.T.);+#3651 = VERTEX_POINT('',#3652);+#3652 = CARTESIAN_POINT('',(-0.387574908549,0.661959414113,0.59710515));+#3653 = SURFACE_CURVE('',#3654,(#3658),.PCURVE_S1.);+#3654 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3655,#3656,#3657),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3655 = CARTESIAN_POINT('',(-0.407832072033,0.652639751722,0.59710515));+#3656 = CARTESIAN_POINT('',(-0.400563191098,0.661959414113,0.59710515));+#3657 = CARTESIAN_POINT('',(-0.387574908549,0.661959414113,0.59710515));+#3658 = PCURVE('',#3558,#3659);+#3659 = DEFINITIONAL_REPRESENTATION('',(#3660),#3664);+#3660 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3661,#3662,#3663),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3661 = CARTESIAN_POINT('',(1.3603516986E-02,5.995117787E-02));+#3662 = CARTESIAN_POINT('',(2.0872397921E-02,6.9270840261E-02));+#3663 = CARTESIAN_POINT('',(3.386068047E-02,6.9270840261E-02));+#3664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3665 = ORIENTED_EDGE('',*,*,#3666,.T.);+#3666 = EDGE_CURVE('',#3651,#3667,#3669,.T.);+#3667 = VERTEX_POINT('',#3668);+#3668 = CARTESIAN_POINT('',(-0.379736366099,0.661025169228,0.59710515));+#3669 = SURFACE_CURVE('',#3670,(#3674),.PCURVE_S1.);+#3670 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3671,#3672,#3673),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3671 = CARTESIAN_POINT('',(-0.387574908549,0.661959414113,0.59710515));+#3672 = CARTESIAN_POINT('',(-0.383427772718,0.661959414113,0.59710515));+#3673 = CARTESIAN_POINT('',(-0.379736366099,0.661025169228,0.59710515));+#3674 = PCURVE('',#3558,#3675);+#3675 = DEFINITIONAL_REPRESENTATION('',(#3676),#3680);+#3676 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3677,#3678,#3679),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3677 = CARTESIAN_POINT('',(3.386068047E-02,6.9270840261E-02));+#3678 = CARTESIAN_POINT('',(3.8007816301E-02,6.9270840261E-02));+#3679 = CARTESIAN_POINT('',(4.169922292E-02,6.8336595376E-02));+#3680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3681 = ORIENTED_EDGE('',*,*,#3682,.T.);+#3682 = EDGE_CURVE('',#3667,#3683,#3685,.T.);+#3683 = VERTEX_POINT('',#3684);+#3684 = CARTESIAN_POINT('',(-0.372535844545,0.658222434572,0.59710515));+#3685 = SURFACE_CURVE('',#3686,(#3690),.PCURVE_S1.);+#3686 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3687,#3688,#3689),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3687 = CARTESIAN_POINT('',(-0.379736366099,0.661025169228,0.59710515));+#3688 = CARTESIAN_POINT('',(-0.376044959479,0.660090924342,0.59710515));+#3689 = CARTESIAN_POINT('',(-0.372535844545,0.658222434572,0.59710515));+#3690 = PCURVE('',#3558,#3691);+#3691 = DEFINITIONAL_REPRESENTATION('',(#3692),#3696);+#3692 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3693,#3694,#3695),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3693 = CARTESIAN_POINT('',(4.169922292E-02,6.8336595376E-02));+#3694 = CARTESIAN_POINT('',(4.539062954E-02,6.740235049E-02));+#3695 = CARTESIAN_POINT('',(4.8899744474E-02,6.553386072E-02));+#3696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3697 = ORIENTED_EDGE('',*,*,#3698,.T.);+#3698 = EDGE_CURVE('',#3683,#3699,#3701,.T.);+#3699 = VERTEX_POINT('',#3700);+#3700 = CARTESIAN_POINT('',(-0.372535844545,0.648788839879,0.59710515));+#3701 = SURFACE_CURVE('',#3702,(#3706),.PCURVE_S1.);+#3702 = LINE('',#3703,#3704);+#3703 = CARTESIAN_POINT('',(-0.372535844545,0.658222434572,0.59710515));+#3704 = VECTOR('',#3705,1.);+#3705 = DIRECTION('',(0.,-1.,0.));+#3706 = PCURVE('',#3558,#3707);+#3707 = DEFINITIONAL_REPRESENTATION('',(#3708),#3712);+#3708 = LINE('',#3709,#3710);+#3709 = CARTESIAN_POINT('',(4.8899744474E-02,6.553386072E-02));+#3710 = VECTOR('',#3711,1.);+#3711 = DIRECTION('',(0.,-1.));+#3712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3713 = ORIENTED_EDGE('',*,*,#3714,.T.);+#3714 = EDGE_CURVE('',#3699,#3715,#3717,.T.);+#3715 = VERTEX_POINT('',#3716);+#3716 = CARTESIAN_POINT('',(-0.37978193902,0.653027121553,0.59710515));+#3717 = SURFACE_CURVE('',#3718,(#3722),.PCURVE_S1.);+#3718 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3719,#3720,#3721),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3719 = CARTESIAN_POINT('',(-0.372535844545,0.648788839879,0.59710515));+#3720 = CARTESIAN_POINT('',(-0.375908240716,0.651568788074,0.59710515));+#3721 = CARTESIAN_POINT('',(-0.37978193902,0.653027121553,0.59710515));+#3722 = PCURVE('',#3558,#3723);+#3723 = DEFINITIONAL_REPRESENTATION('',(#3724),#3728);+#3724 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3725,#3726,#3727),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3725 = CARTESIAN_POINT('',(4.8899744474E-02,5.6100266027E-02));+#3726 = CARTESIAN_POINT('',(4.5527348303E-02,5.8880214222E-02));+#3727 = CARTESIAN_POINT('',(4.1653649999E-02,6.0338547701E-02));+#3728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3729 = ORIENTED_EDGE('',*,*,#3730,.T.);+#3730 = EDGE_CURVE('',#3715,#3731,#3733,.T.);+#3731 = VERTEX_POINT('',#3732);+#3732 = CARTESIAN_POINT('',(-0.387574908549,0.654485455032,0.59710515));+#3733 = SURFACE_CURVE('',#3734,(#3738),.PCURVE_S1.);+#3734 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3735,#3736,#3737),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3735 = CARTESIAN_POINT('',(-0.37978193902,0.653027121553,0.59710515));+#3736 = CARTESIAN_POINT('',(-0.383655637324,0.654485455032,0.59710515));+#3737 = CARTESIAN_POINT('',(-0.387574908549,0.654485455032,0.59710515));+#3738 = PCURVE('',#3558,#3739);+#3739 = DEFINITIONAL_REPRESENTATION('',(#3740),#3744);+#3740 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3741,#3742,#3743),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3741 = CARTESIAN_POINT('',(4.1653649999E-02,6.0338547701E-02));+#3742 = CARTESIAN_POINT('',(3.7779951695E-02,6.179688118E-02));+#3743 = CARTESIAN_POINT('',(3.386068047E-02,6.179688118E-02));+#3744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3745 = ORIENTED_EDGE('',*,*,#3746,.T.);+#3746 = EDGE_CURVE('',#3731,#3747,#3749,.T.);+#3747 = VERTEX_POINT('',#3748);+#3748 = CARTESIAN_POINT('',(-0.40101892031,0.647558371006,0.59710515));+#3749 = SURFACE_CURVE('',#3750,(#3754),.PCURVE_S1.);+#3750 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3751,#3752,#3753),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3751 = CARTESIAN_POINT('',(-0.387574908549,0.654485455032,0.59710515));+#3752 = CARTESIAN_POINT('',(-0.39655277403,0.654485455032,0.59710515));+#3753 = CARTESIAN_POINT('',(-0.40101892031,0.647558371006,0.59710515));+#3754 = PCURVE('',#3558,#3755);+#3755 = DEFINITIONAL_REPRESENTATION('',(#3756),#3760);+#3756 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3757,#3758,#3759),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3757 = CARTESIAN_POINT('',(3.386068047E-02,6.179688118E-02));+#3758 = CARTESIAN_POINT('',(2.4882814989E-02,6.179688118E-02));+#3759 = CARTESIAN_POINT('',(2.0416668709E-02,5.4869797154E-02));+#3760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3761 = ORIENTED_EDGE('',*,*,#3762,.T.);+#3762 = EDGE_CURVE('',#3747,#3763,#3765,.T.);+#3763 = VERTEX_POINT('',#3764);+#3764 = CARTESIAN_POINT('',(-0.40548506659,0.626640400164,0.59710515));+#3765 = SURFACE_CURVE('',#3766,(#3770),.PCURVE_S1.);+#3766 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3767,#3768,#3769),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3767 = CARTESIAN_POINT('',(-0.40101892031,0.647558371006,0.59710515));+#3768 = CARTESIAN_POINT('',(-0.40548506659,0.64063128698,0.59710515));+#3769 = CARTESIAN_POINT('',(-0.40548506659,0.626640400164,0.59710515));+#3770 = PCURVE('',#3558,#3771);+#3771 = DEFINITIONAL_REPRESENTATION('',(#3772),#3776);+#3772 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3773,#3774,#3775),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3773 = CARTESIAN_POINT('',(2.0416668709E-02,5.4869797154E-02));+#3774 = CARTESIAN_POINT('',(1.5950522429E-02,4.7942713128E-02));+#3775 = CARTESIAN_POINT('',(1.5950522429E-02,3.3951826312E-02));+#3776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3777 = ORIENTED_EDGE('',*,*,#3778,.T.);+#3778 = EDGE_CURVE('',#3763,#3779,#3781,.T.);+#3779 = VERTEX_POINT('',#3780);+#3780 = CARTESIAN_POINT('',(-0.40101892031,0.605768002243,0.59710515));+#3781 = SURFACE_CURVE('',#3782,(#3786),.PCURVE_S1.);+#3782 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3783,#3784,#3785),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3783 = CARTESIAN_POINT('',(-0.40548506659,0.626640400164,0.59710515));+#3784 = CARTESIAN_POINT('',(-0.40548506659,0.61269508627,0.59710515));+#3785 = CARTESIAN_POINT('',(-0.40101892031,0.605768002243,0.59710515));+#3786 = PCURVE('',#3558,#3787); #3787 = DEFINITIONAL_REPRESENTATION('',(#3788),#3792);-#3788 = LINE('',#3789,#3790);-#3789 = CARTESIAN_POINT('',(0.,0.));-#3790 = VECTOR('',#3791,1.);-#3791 = DIRECTION('',(-8.673617379884E-17,-1.));+#3788 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3789,#3790,#3791),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3789 = CARTESIAN_POINT('',(1.5950522429E-02,3.3951826312E-02));+#3790 = CARTESIAN_POINT('',(1.5950522429E-02,2.0006512418E-02));+#3791 = CARTESIAN_POINT('',(2.0416668709E-02,1.3079428391E-02)); #3792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3793 = PCURVE('',#3338,#3794);-#3794 = DEFINITIONAL_REPRESENTATION('',(#3795),#3799);-#3795 = LINE('',#3796,#3797);-#3796 = CARTESIAN_POINT('',(1.570796326795,0.));-#3797 = VECTOR('',#3798,1.);-#3798 = DIRECTION('',(0.,1.));-#3799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3800 = ORIENTED_EDGE('',*,*,#3593,.T.);-#3801 = ADVANCED_FACE('',(#3802),#3338,.T.);-#3802 = FACE_BOUND('',#3803,.T.);-#3803 = EDGE_LOOP('',(#3804,#3805,#3806,#3827));-#3804 = ORIENTED_EDGE('',*,*,#3780,.F.);-#3805 = ORIENTED_EDGE('',*,*,#3310,.T.);-#3806 = ORIENTED_EDGE('',*,*,#3807,.T.);-#3807 = EDGE_CURVE('',#3313,#3617,#3808,.T.);-#3808 = SURFACE_CURVE('',#3809,(#3813,#3820),.PCURVE_S1.);-#3809 = LINE('',#3810,#3811);-#3810 = CARTESIAN_POINT('',(5.E+05,0.9,-0.600000000043));-#3811 = VECTOR('',#3812,1.);-#3812 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3813 = PCURVE('',#3338,#3814);-#3814 = DEFINITIONAL_REPRESENTATION('',(#3815),#3819);-#3815 = LINE('',#3816,#3817);-#3816 = CARTESIAN_POINT('',(3.14159265359,0.));-#3817 = VECTOR('',#3818,1.);-#3818 = DIRECTION('',(0.,1.));-#3819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3820 = PCURVE('',#3547,#3821);-#3821 = DEFINITIONAL_REPRESENTATION('',(#3822),#3826);-#3822 = LINE('',#3823,#3824);-#3823 = CARTESIAN_POINT('',(0.,0.85));-#3824 = VECTOR('',#3825,1.);-#3825 = DIRECTION('',(-1.,0.));-#3826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3827 = ORIENTED_EDGE('',*,*,#3616,.T.);-#3828 = ADVANCED_FACE('',(#3829),#3547,.F.);-#3829 = FACE_BOUND('',#3830,.T.);-#3830 = EDGE_LOOP('',(#3831,#3832,#3853,#3854));-#3831 = ORIENTED_EDGE('',*,*,#3533,.F.);-#3832 = ORIENTED_EDGE('',*,*,#3833,.T.);-#3833 = EDGE_CURVE('',#3501,#3641,#3834,.T.);-#3834 = SURFACE_CURVE('',#3835,(#3839,#3846),.PCURVE_S1.);-#3835 = LINE('',#3836,#3837);-#3836 = CARTESIAN_POINT('',(5.E+05,5.E-02,-0.600000000043));-#3837 = VECTOR('',#3838,1.);-#3838 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3839 = PCURVE('',#3547,#3840);-#3840 = DEFINITIONAL_REPRESENTATION('',(#3841),#3845);-#3841 = LINE('',#3842,#3843);-#3842 = CARTESIAN_POINT('',(0.,0.));-#3843 = VECTOR('',#3844,1.);-#3844 = DIRECTION('',(-1.,0.));-#3845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3846 = PCURVE('',#3521,#3847);-#3847 = DEFINITIONAL_REPRESENTATION('',(#3848),#3852);-#3848 = LINE('',#3849,#3850);-#3849 = CARTESIAN_POINT('',(3.14159265359,0.));-#3850 = VECTOR('',#3851,1.);-#3851 = DIRECTION('',(0.,1.));-#3852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3853 = ORIENTED_EDGE('',*,*,#3640,.T.);-#3854 = ORIENTED_EDGE('',*,*,#3807,.F.);-#3855 = ADVANCED_FACE('',(#3856),#3521,.T.);-#3856 = FACE_BOUND('',#3857,.T.);-#3857 = EDGE_LOOP('',(#3858,#3859,#3860,#3881));-#3858 = ORIENTED_EDGE('',*,*,#3833,.F.);-#3859 = ORIENTED_EDGE('',*,*,#3500,.T.);-#3860 = ORIENTED_EDGE('',*,*,#3861,.T.);-#3861 = EDGE_CURVE('',#3473,#3664,#3862,.T.);-#3862 = SURFACE_CURVE('',#3863,(#3867,#3874),.PCURVE_S1.);-#3863 = LINE('',#3864,#3865);-#3864 = CARTESIAN_POINT('',(5.E+05,2.5E-02,-0.575000000043));-#3865 = VECTOR('',#3866,1.);-#3866 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3867 = PCURVE('',#3521,#3868);-#3868 = DEFINITIONAL_REPRESENTATION('',(#3869),#3873);-#3869 = LINE('',#3870,#3871);-#3870 = CARTESIAN_POINT('',(4.712388980385,0.));-#3871 = VECTOR('',#3872,1.);-#3872 = DIRECTION('',(0.,1.));-#3873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3874 = PCURVE('',#3488,#3875);-#3875 = DEFINITIONAL_REPRESENTATION('',(#3876),#3880);-#3876 = LINE('',#3877,#3878);-#3877 = CARTESIAN_POINT('',(-1.15,5.81824871651E-52));-#3878 = VECTOR('',#3879,1.);-#3879 = DIRECTION('',(8.673617379884E-17,-1.));-#3880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3881 = ORIENTED_EDGE('',*,*,#3663,.T.);-#3882 = ADVANCED_FACE('',(#3883),#3488,.F.);-#3883 = FACE_BOUND('',#3884,.T.);-#3884 = EDGE_LOOP('',(#3885,#3886,#3907,#3908));-#3885 = ORIENTED_EDGE('',*,*,#3472,.F.);-#3886 = ORIENTED_EDGE('',*,*,#3887,.T.);-#3887 = EDGE_CURVE('',#3440,#3688,#3888,.T.);-#3888 = SURFACE_CURVE('',#3889,(#3893,#3900),.PCURVE_S1.);-#3889 = LINE('',#3890,#3891);-#3890 = CARTESIAN_POINT('',(5.E+05,2.5E-02,0.574999999957));-#3891 = VECTOR('',#3892,1.);-#3892 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3893 = PCURVE('',#3488,#3894);-#3894 = DEFINITIONAL_REPRESENTATION('',(#3895),#3899);-#3895 = LINE('',#3896,#3897);-#3896 = CARTESIAN_POINT('',(0.,0.));-#3897 = VECTOR('',#3898,1.);-#3898 = DIRECTION('',(8.673617379884E-17,-1.));-#3899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3900 = PCURVE('',#3460,#3901);-#3901 = DEFINITIONAL_REPRESENTATION('',(#3902),#3906);-#3902 = LINE('',#3903,#3904);-#3903 = CARTESIAN_POINT('',(4.712388980385,0.));-#3904 = VECTOR('',#3905,1.);-#3905 = DIRECTION('',(0.,1.));-#3906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3907 = ORIENTED_EDGE('',*,*,#3687,.T.);-#3908 = ORIENTED_EDGE('',*,*,#3861,.F.);-#3909 = ADVANCED_FACE('',(#3910),#3460,.T.);-#3910 = FACE_BOUND('',#3911,.T.);-#3911 = EDGE_LOOP('',(#3912,#3913,#3914,#3935));-#3912 = ORIENTED_EDGE('',*,*,#3887,.F.);-#3913 = ORIENTED_EDGE('',*,*,#3439,.T.);-#3914 = ORIENTED_EDGE('',*,*,#3915,.T.);-#3915 = EDGE_CURVE('',#3412,#3711,#3916,.T.);-#3916 = SURFACE_CURVE('',#3917,(#3921,#3928),.PCURVE_S1.);-#3917 = LINE('',#3918,#3919);-#3918 = CARTESIAN_POINT('',(5.E+05,5.E-02,0.599999999957));-#3919 = VECTOR('',#3920,1.);-#3920 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3921 = PCURVE('',#3460,#3922);-#3922 = DEFINITIONAL_REPRESENTATION('',(#3923),#3927);-#3923 = LINE('',#3924,#3925);-#3924 = CARTESIAN_POINT('',(6.28318530718,0.));-#3925 = VECTOR('',#3926,1.);-#3926 = DIRECTION('',(0.,1.));-#3927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3928 = PCURVE('',#3427,#3929);-#3929 = DEFINITIONAL_REPRESENTATION('',(#3930),#3934);-#3930 = LINE('',#3931,#3932);-#3931 = CARTESIAN_POINT('',(-0.85,2.256949153579E-34));-#3932 = VECTOR('',#3933,1.);-#3933 = DIRECTION('',(1.106347624303E-32,-1.));-#3934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3935 = ORIENTED_EDGE('',*,*,#3710,.T.);-#3936 = ADVANCED_FACE('',(#3937),#3427,.F.);-#3937 = FACE_BOUND('',#3938,.T.);-#3938 = EDGE_LOOP('',(#3939,#3940,#3941,#3962));-#3939 = ORIENTED_EDGE('',*,*,#3915,.F.);-#3940 = ORIENTED_EDGE('',*,*,#3411,.T.);-#3941 = ORIENTED_EDGE('',*,*,#3942,.T.);-#3942 = EDGE_CURVE('',#3379,#3565,#3943,.T.);-#3943 = SURFACE_CURVE('',#3944,(#3948,#3955),.PCURVE_S1.);-#3944 = LINE('',#3945,#3946);-#3945 = CARTESIAN_POINT('',(5.E+05,0.9,0.599999999957));-#3946 = VECTOR('',#3947,1.);-#3947 = DIRECTION('',(-1.,-0.,8.673617379884E-17));-#3948 = PCURVE('',#3427,#3949);-#3949 = DEFINITIONAL_REPRESENTATION('',(#3950),#3954);-#3950 = LINE('',#3951,#3952);-#3951 = CARTESIAN_POINT('',(0.,0.));-#3952 = VECTOR('',#3953,1.);-#3953 = DIRECTION('',(1.106347624303E-32,-1.));-#3954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3955 = PCURVE('',#3399,#3956);-#3956 = DEFINITIONAL_REPRESENTATION('',(#3957),#3961);+#3793 = ORIENTED_EDGE('',*,*,#3794,.T.);+#3794 = EDGE_CURVE('',#3779,#3795,#3797,.T.);+#3795 = VERTEX_POINT('',#3796);+#3796 = CARTESIAN_POINT('',(-0.387574908549,0.598840918217,0.59710515));+#3797 = SURFACE_CURVE('',#3798,(#3802),.PCURVE_S1.);+#3798 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3799,#3800,#3801),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3799 = CARTESIAN_POINT('',(-0.40101892031,0.605768002243,0.59710515));+#3800 = CARTESIAN_POINT('',(-0.39655277403,0.598840918217,0.59710515));+#3801 = CARTESIAN_POINT('',(-0.387574908549,0.598840918217,0.59710515));+#3802 = PCURVE('',#3558,#3803);+#3803 = DEFINITIONAL_REPRESENTATION('',(#3804),#3808);+#3804 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3805,#3806,#3807),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3805 = CARTESIAN_POINT('',(2.0416668709E-02,1.3079428391E-02));+#3806 = CARTESIAN_POINT('',(2.4882814989E-02,6.152344365E-03));+#3807 = CARTESIAN_POINT('',(3.386068047E-02,6.152344365E-03));+#3808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3809 = ORIENTED_EDGE('',*,*,#3810,.T.);+#3810 = EDGE_CURVE('',#3795,#3811,#3813,.T.);+#3811 = VERTEX_POINT('',#3812);+#3812 = CARTESIAN_POINT('',(-0.379713579638,0.600299251697,0.59710515));+#3813 = SURFACE_CURVE('',#3814,(#3818),.PCURVE_S1.);+#3814 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3815,#3816,#3817),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3815 = CARTESIAN_POINT('',(-0.387574908549,0.598840918217,0.59710515));+#3816 = CARTESIAN_POINT('',(-0.383564491481,0.598840918217,0.59710515));+#3817 = CARTESIAN_POINT('',(-0.379713579638,0.600299251697,0.59710515));+#3818 = PCURVE('',#3558,#3819);+#3819 = DEFINITIONAL_REPRESENTATION('',(#3820),#3824);+#3820 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3821,#3822,#3823),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3821 = CARTESIAN_POINT('',(3.386068047E-02,6.152344365E-03));+#3822 = CARTESIAN_POINT('',(3.7871097538E-02,6.152344365E-03));+#3823 = CARTESIAN_POINT('',(4.1722009381E-02,7.610677845E-03));+#3824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3825 = ORIENTED_EDGE('',*,*,#3826,.T.);+#3826 = EDGE_CURVE('',#3811,#3548,#3827,.T.);+#3827 = SURFACE_CURVE('',#3828,(#3832),.PCURVE_S1.);+#3828 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3829,#3830,#3831),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3829 = CARTESIAN_POINT('',(-0.379713579638,0.600299251697,0.59710515));+#3830 = CARTESIAN_POINT('',(-0.375862667795,0.601757585176,0.59710515));+#3831 = CARTESIAN_POINT('',(-0.372535844545,0.60453753337,0.59710515));+#3832 = PCURVE('',#3558,#3833);+#3833 = DEFINITIONAL_REPRESENTATION('',(#3834),#3838);+#3834 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3835,#3836,#3837),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3835 = CARTESIAN_POINT('',(4.1722009381E-02,7.610677845E-03));+#3836 = CARTESIAN_POINT('',(4.5572921224E-02,9.069011324E-03));+#3837 = CARTESIAN_POINT('',(4.8899744474E-02,1.1848959518E-02));+#3838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3839 = SHELL_BASED_SURFACE_MODEL('',(#3840));+#3840 = OPEN_SHELL('',(#3841));+#3841 = ADVANCED_FACE('',(#3842),#3856,.T.);+#3842 = FACE_BOUND('',#3843,.F.);+#3843 = EDGE_LOOP('',(#3844,#3867,#3883,#3899,#3915,#3931));+#3844 = ORIENTED_EDGE('',*,*,#3845,.T.);+#3845 = EDGE_CURVE('',#3846,#3848,#3850,.T.);+#3846 = VERTEX_POINT('',#3847);+#3847 = CARTESIAN_POINT('',(-0.355445999086,0.592688573852,0.59710515));+#3848 = VERTEX_POINT('',#3849);+#3849 = CARTESIAN_POINT('',(-0.355445999086,0.66072894524,0.59710515));+#3850 = SURFACE_CURVE('',#3851,(#3855),.PCURVE_S1.);+#3851 = LINE('',#3852,#3853);+#3852 = CARTESIAN_POINT('',(-0.355445999086,0.592688573852,0.59710515));+#3853 = VECTOR('',#3854,1.);+#3854 = DIRECTION('',(0.,1.,0.));+#3855 = PCURVE('',#3856,#3861);+#3856 = PLANE('',#3857);+#3857 = AXIS2_PLACEMENT_3D('',#3858,#3859,#3860);+#3858 = CARTESIAN_POINT('',(-0.365244177149,0.592688573852,0.59710515));+#3859 = DIRECTION('',(0.,0.,1.));+#3860 = DIRECTION('',(1.,0.,-0.));+#3861 = DEFINITIONAL_REPRESENTATION('',(#3862),#3866);+#3862 = LINE('',#3863,#3864);+#3863 = CARTESIAN_POINT('',(9.798178063E-03,0.));+#3864 = VECTOR('',#3865,1.);+#3865 = DIRECTION('',(0.,1.));+#3866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3867 = ORIENTED_EDGE('',*,*,#3868,.T.);+#3868 = EDGE_CURVE('',#3848,#3869,#3871,.T.);+#3869 = VERTEX_POINT('',#3870);+#3870 = CARTESIAN_POINT('',(-0.346194696078,0.66072894524,0.59710515));+#3871 = SURFACE_CURVE('',#3872,(#3876),.PCURVE_S1.);+#3872 = LINE('',#3873,#3874);+#3873 = CARTESIAN_POINT('',(-0.355445999086,0.66072894524,0.59710515));+#3874 = VECTOR('',#3875,1.);+#3875 = DIRECTION('',(1.,0.,0.));+#3876 = PCURVE('',#3856,#3877);+#3877 = DEFINITIONAL_REPRESENTATION('',(#3878),#3882);+#3878 = LINE('',#3879,#3880);+#3879 = CARTESIAN_POINT('',(9.798178063E-03,6.8040371388E-02));+#3880 = VECTOR('',#3881,1.);+#3881 = DIRECTION('',(1.,0.));+#3882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3883 = ORIENTED_EDGE('',*,*,#3884,.T.);+#3884 = EDGE_CURVE('',#3869,#3885,#3887,.T.);+#3885 = VERTEX_POINT('',#3886);+#3886 = CARTESIAN_POINT('',(-0.346194696078,0.60043597046,0.59710515));+#3887 = SURFACE_CURVE('',#3888,(#3892),.PCURVE_S1.);+#3888 = LINE('',#3889,#3890);+#3889 = CARTESIAN_POINT('',(-0.346194696078,0.66072894524,0.59710515));+#3890 = VECTOR('',#3891,1.);+#3891 = DIRECTION('',(0.,-1.,0.));+#3892 = PCURVE('',#3856,#3893);+#3893 = DEFINITIONAL_REPRESENTATION('',(#3894),#3898);+#3894 = LINE('',#3895,#3896);+#3895 = CARTESIAN_POINT('',(1.9049481071E-02,6.8040371388E-02));+#3896 = VECTOR('',#3897,1.);+#3897 = DIRECTION('',(0.,-1.));+#3898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3899 = ORIENTED_EDGE('',*,*,#3900,.T.);+#3900 = EDGE_CURVE('',#3885,#3901,#3903,.T.);+#3901 = VERTEX_POINT('',#3902);+#3902 = CARTESIAN_POINT('',(-0.313336619875,0.60043597046,0.59710515));+#3903 = SURFACE_CURVE('',#3904,(#3908),.PCURVE_S1.);+#3904 = LINE('',#3905,#3906);+#3905 = CARTESIAN_POINT('',(-0.346194696078,0.60043597046,0.59710515));+#3906 = VECTOR('',#3907,1.);+#3907 = DIRECTION('',(1.,0.,0.));+#3908 = PCURVE('',#3856,#3909);+#3909 = DEFINITIONAL_REPRESENTATION('',(#3910),#3914);+#3910 = LINE('',#3911,#3912);+#3911 = CARTESIAN_POINT('',(1.9049481071E-02,7.747396608E-03));+#3912 = VECTOR('',#3913,1.);+#3913 = DIRECTION('',(1.,0.));+#3914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3915 = ORIENTED_EDGE('',*,*,#3916,.T.);+#3916 = EDGE_CURVE('',#3901,#3917,#3919,.T.);+#3917 = VERTEX_POINT('',#3918);+#3918 = CARTESIAN_POINT('',(-0.313336619875,0.592688573852,0.59710515));+#3919 = SURFACE_CURVE('',#3920,(#3924),.PCURVE_S1.);+#3920 = LINE('',#3921,#3922);+#3921 = CARTESIAN_POINT('',(-0.313336619875,0.60043597046,0.59710515));+#3922 = VECTOR('',#3923,1.);+#3923 = DIRECTION('',(0.,-1.,0.));+#3924 = PCURVE('',#3856,#3925);+#3925 = DEFINITIONAL_REPRESENTATION('',(#3926),#3930);+#3926 = LINE('',#3927,#3928);+#3927 = CARTESIAN_POINT('',(5.1907557274E-02,7.747396608E-03));+#3928 = VECTOR('',#3929,1.);+#3929 = DIRECTION('',(0.,-1.));+#3930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3931 = ORIENTED_EDGE('',*,*,#3932,.T.);+#3932 = EDGE_CURVE('',#3917,#3846,#3933,.T.);+#3933 = SURFACE_CURVE('',#3934,(#3938),.PCURVE_S1.);+#3934 = LINE('',#3935,#3936);+#3935 = CARTESIAN_POINT('',(-0.313336619875,0.592688573852,0.59710515));+#3936 = VECTOR('',#3937,1.);+#3937 = DIRECTION('',(-1.,0.,0.));+#3938 = PCURVE('',#3856,#3939);+#3939 = DEFINITIONAL_REPRESENTATION('',(#3940),#3944);+#3940 = LINE('',#3941,#3942);+#3941 = CARTESIAN_POINT('',(5.1907557274E-02,0.));+#3942 = VECTOR('',#3943,1.);+#3943 = DIRECTION('',(-1.,0.));+#3944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3945 = SHELL_BASED_SURFACE_MODEL('',(#3946));+#3946 = OPEN_SHELL('',(#3947));+#3947 = ADVANCED_FACE('',(#3948),#3962,.T.);+#3948 = FACE_BOUND('',#3949,.F.);+#3949 = EDGE_LOOP('',(#3950,#3973,#3989,#4005,#4021,#4037,#4053,#4069,+ #4085,#4101,#4117,#4133,#4149,#4165,#4181,#4197,#4213,#4229,#4245,+ #4261,#4277));+#3950 = ORIENTED_EDGE('',*,*,#3951,.T.);+#3951 = EDGE_CURVE('',#3952,#3954,#3956,.T.);+#3952 = VERTEX_POINT('',#3953);+#3953 = CARTESIAN_POINT('',(-0.292054065664,0.60043597046,0.59710515));+#3954 = VERTEX_POINT('',#3955);+#3955 = CARTESIAN_POINT('',(-0.260791041704,0.60043597046,0.59710515));+#3956 = SURFACE_CURVE('',#3957,(#3961),.PCURVE_S1.); #3957 = LINE('',#3958,#3959);-#3958 = CARTESIAN_POINT('',(0.,0.));+#3958 = CARTESIAN_POINT('',(-0.292054065664,0.60043597046,0.59710515)); #3959 = VECTOR('',#3960,1.);-#3960 = DIRECTION('',(0.,1.));-#3961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3962 = ORIENTED_EDGE('',*,*,#3734,.T.);-#3963 = ADVANCED_FACE('',(#3964),#3399,.T.);-#3964 = FACE_BOUND('',#3965,.T.);-#3965 = EDGE_LOOP('',(#3966,#3967,#3968,#3969));-#3966 = ORIENTED_EDGE('',*,*,#3942,.F.);-#3967 = ORIENTED_EDGE('',*,*,#3378,.T.);-#3968 = ORIENTED_EDGE('',*,*,#3758,.T.);-#3969 = ORIENTED_EDGE('',*,*,#3562,.T.);-#3970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) -GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3974)) -GLOBAL_UNIT_ASSIGNED_CONTEXT((#3971,#3972,#3973)) REPRESENTATION_CONTEXT-('Context #1','3D Context with UNIT and UNCERTAINTY') );-#3971 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );-#3972 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );-#3973 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );-#3974 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#3971,- 'distance_accuracy_value','confusion accuracy');-#3975 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3976,#3978);-#3976 = ( REPRESENTATION_RELATIONSHIP('','',#59,#36) -REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3977) -SHAPE_REPRESENTATION_RELATIONSHIP() );-#3977 = ITEM_DEFINED_TRANSFORMATION('','',#11,#37);-#3978 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',- #3979);-#3979 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','=>[0:1:1:1]','',#31,#54,$);-#3980 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#56));-#3981 = SHAPE_DEFINITION_REPRESENTATION(#3982,#3988);-#3982 = PRODUCT_DEFINITION_SHAPE('','',#3983);-#3983 = PRODUCT_DEFINITION('design','',#3984,#3987);-#3984 = PRODUCT_DEFINITION_FORMATION('','',#3985);-#3985 = PRODUCT('laser_etch','laser_etch','',(#3986));-#3986 = PRODUCT_CONTEXT('',#2,'mechanical');-#3987 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');-#3988 = SHAPE_REPRESENTATION('',(#11,#3989,#4287,#4393,#4739,#4925,#5113- ,#5459,#5805,#6217,#6435,#6703,#7051,#7221,#7391,#7561),#7763);-#3989 = SHELL_BASED_SURFACE_MODEL('',(#3990));-#3990 = OPEN_SHELL('',(#3991));-#3991 = ADVANCED_FACE('',(#3992),#4006,.T.);-#3992 = FACE_BOUND('',#3993,.F.);-#3993 = EDGE_LOOP('',(#3994,#4017,#4033,#4049,#4065,#4081,#4097,#4113,- #4129,#4145,#4161,#4177,#4193,#4209,#4225,#4241,#4257,#4273));-#3994 = ORIENTED_EDGE('',*,*,#3995,.T.);-#3995 = EDGE_CURVE('',#3996,#3998,#4000,.T.);-#3996 = VERTEX_POINT('',#3997);-#3997 = CARTESIAN_POINT('',(-0.372535807292,-2.046223958333E-02,- 0.9350001));-#3998 = VERTEX_POINT('',#3999);-#3999 = CARTESIAN_POINT('',(-0.372535807292,-2.989583333333E-02,- 0.9350001));-#4000 = SURFACE_CURVE('',#4001,(#4005),.PCURVE_S1.);-#4001 = LINE('',#4002,#4003);-#4002 = CARTESIAN_POINT('',(-0.372535807292,-2.046223958333E-02,- 0.9350001));-#4003 = VECTOR('',#4004,1.);-#4004 = DIRECTION('',(0.,-1.,0.));-#4005 = PCURVE('',#4006,#4011);-#4006 = PLANE('',#4007);-#4007 = AXIS2_PLACEMENT_3D('',#4008,#4009,#4010);-#4008 = CARTESIAN_POINT('',(-0.421435546875,-3.231119791667E-02,- 0.9350001));-#4009 = DIRECTION('',(0.,0.,1.));-#4010 = DIRECTION('',(1.,0.,-0.));-#4011 = DEFINITIONAL_REPRESENTATION('',(#4012),#4016);-#4012 = LINE('',#4013,#4014);-#4013 = CARTESIAN_POINT('',(4.8899739583E-02,1.184895833334E-02));-#4014 = VECTOR('',#4015,1.);-#4015 = DIRECTION('',(0.,-1.));-#4016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4017 = ORIENTED_EDGE('',*,*,#4018,.T.);-#4018 = EDGE_CURVE('',#3998,#4019,#4021,.T.);-#4019 = VERTEX_POINT('',#4020);-#4020 = CARTESIAN_POINT('',(-0.379736328125,-3.269856770833E-02,- 0.9350001));-#4021 = SURFACE_CURVE('',#4022,(#4026),.PCURVE_S1.);-#4022 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4023,#4024,#4025),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4023 = CARTESIAN_POINT('',(-0.372535807292,-2.989583333333E-02,- 0.9350001));-#4024 = CARTESIAN_POINT('',(-0.376044921875,-3.176432291667E-02,- 0.9350001));-#4025 = CARTESIAN_POINT('',(-0.379736328125,-3.269856770833E-02,- 0.9350001));-#4026 = PCURVE('',#4006,#4027);-#4027 = DEFINITIONAL_REPRESENTATION('',(#4028),#4032);-#4028 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4029,#4030,#4031),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4029 = CARTESIAN_POINT('',(4.8899739583E-02,2.41536458334E-03));-#4030 = CARTESIAN_POINT('',(4.5390625E-02,5.46875E-04));-#4031 = CARTESIAN_POINT('',(4.169921875E-02,-3.8736979166E-04));-#4032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4033 = ORIENTED_EDGE('',*,*,#4034,.T.);-#4034 = EDGE_CURVE('',#4019,#4035,#4037,.T.);-#4035 = VERTEX_POINT('',#4036);-#4036 = CARTESIAN_POINT('',(-0.387574869792,-3.36328125E-02,0.9350001));-#4037 = SURFACE_CURVE('',#4038,(#4042),.PCURVE_S1.);-#4038 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4039,#4040,#4041),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4039 = CARTESIAN_POINT('',(-0.379736328125,-3.269856770833E-02,- 0.9350001));-#4040 = CARTESIAN_POINT('',(-0.383427734375,-3.36328125E-02,0.9350001));-#4041 = CARTESIAN_POINT('',(-0.387574869792,-3.36328125E-02,0.9350001));-#4042 = PCURVE('',#4006,#4043);-#4043 = DEFINITIONAL_REPRESENTATION('',(#4044),#4048);-#4044 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4045,#4046,#4047),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4045 = CARTESIAN_POINT('',(4.169921875E-02,-3.8736979166E-04));-#4046 = CARTESIAN_POINT('',(3.80078125E-02,-1.32161458333E-03));-#4047 = CARTESIAN_POINT('',(3.3860677083E-02,-1.32161458333E-03));-#4048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4049 = ORIENTED_EDGE('',*,*,#4050,.T.);-#4050 = EDGE_CURVE('',#4035,#4051,#4053,.T.);-#4051 = VERTEX_POINT('',#4052);-#4052 = CARTESIAN_POINT('',(-0.407877604167,-2.438151041667E-02,- 0.9350001));-#4053 = SURFACE_CURVE('',#4054,(#4058),.PCURVE_S1.);-#4054 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4055,#4056,#4057),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4055 = CARTESIAN_POINT('',(-0.387574869792,-3.36328125E-02,0.9350001));-#4056 = CARTESIAN_POINT('',(-0.400654296875,-3.36328125E-02,0.9350001));-#4057 = CARTESIAN_POINT('',(-0.407877604167,-2.438151041667E-02,- 0.9350001));-#4058 = PCURVE('',#4006,#4059);-#4059 = DEFINITIONAL_REPRESENTATION('',(#4060),#4064);-#4060 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4061,#4062,#4063),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4061 = CARTESIAN_POINT('',(3.3860677083E-02,-1.32161458333E-03));-#4062 = CARTESIAN_POINT('',(2.078125E-02,-1.32161458333E-03));-#4063 = CARTESIAN_POINT('',(1.3557942708E-02,7.9296875E-03));-#4064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4065 = ORIENTED_EDGE('',*,*,#4066,.T.);-#4066 = EDGE_CURVE('',#4051,#4067,#4069,.T.);-#4067 = VERTEX_POINT('',#4068);-#4068 = CARTESIAN_POINT('',(-0.415100911458,1.640625E-03,0.9350001));-#4069 = SURFACE_CURVE('',#4070,(#4074),.PCURVE_S1.);-#4070 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4071,#4072,#4073),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4071 = CARTESIAN_POINT('',(-0.407877604167,-2.438151041667E-02,- 0.9350001));-#4072 = CARTESIAN_POINT('',(-0.415100911458,-1.513020833333E-02,- 0.9350001));-#4073 = CARTESIAN_POINT('',(-0.415100911458,1.640625E-03,0.9350001));-#4074 = PCURVE('',#4006,#4075);-#4075 = DEFINITIONAL_REPRESENTATION('',(#4076),#4080);-#4076 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4077,#4078,#4079),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4077 = CARTESIAN_POINT('',(1.3557942708E-02,7.9296875E-03));-#4078 = CARTESIAN_POINT('',(6.334635417E-03,1.718098958334E-02));-#4079 = CARTESIAN_POINT('',(6.334635417E-03,3.395182291667E-02));-#4080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4081 = ORIENTED_EDGE('',*,*,#4082,.T.);-#4082 = EDGE_CURVE('',#4067,#4083,#4085,.T.);-#4083 = VERTEX_POINT('',#4084);-#4084 = CARTESIAN_POINT('',(-0.40783203125,2.763997395833E-02,0.9350001)- );-#4085 = SURFACE_CURVE('',#4086,(#4090),.PCURVE_S1.);-#4086 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4087,#4088,#4089),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4087 = CARTESIAN_POINT('',(-0.415100911458,1.640625E-03,0.9350001));-#4088 = CARTESIAN_POINT('',(-0.415100911458,1.83203125E-02,0.9350001));-#4089 = CARTESIAN_POINT('',(-0.40783203125,2.763997395833E-02,0.9350001)- );-#4090 = PCURVE('',#4006,#4091);-#4091 = DEFINITIONAL_REPRESENTATION('',(#4092),#4096);-#4092 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4093,#4094,#4095),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4093 = CARTESIAN_POINT('',(6.334635417E-03,3.395182291667E-02));-#4094 = CARTESIAN_POINT('',(6.334635417E-03,5.063151041667E-02));-#4095 = CARTESIAN_POINT('',(1.3603515625E-02,5.9951171875E-02));-#4096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4097 = ORIENTED_EDGE('',*,*,#4098,.T.);-#4098 = EDGE_CURVE('',#4083,#4099,#4101,.T.);-#4099 = VERTEX_POINT('',#4100);-#4100 = CARTESIAN_POINT('',(-0.387574869792,3.695963541667E-02,0.9350001- ));-#4101 = SURFACE_CURVE('',#4102,(#4106),.PCURVE_S1.);-#4102 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4103,#4104,#4105),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4103 = CARTESIAN_POINT('',(-0.40783203125,2.763997395833E-02,0.9350001)- );-#4104 = CARTESIAN_POINT('',(-0.400563151042,3.695963541667E-02,0.9350001- ));-#4105 = CARTESIAN_POINT('',(-0.387574869792,3.695963541667E-02,0.9350001- ));-#4106 = PCURVE('',#4006,#4107);-#4107 = DEFINITIONAL_REPRESENTATION('',(#4108),#4112);-#4108 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4109,#4110,#4111),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4109 = CARTESIAN_POINT('',(1.3603515625E-02,5.9951171875E-02));-#4110 = CARTESIAN_POINT('',(2.0872395833E-02,6.927083333334E-02));-#4111 = CARTESIAN_POINT('',(3.3860677083E-02,6.927083333334E-02));-#4112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4113 = ORIENTED_EDGE('',*,*,#4114,.T.);-#4114 = EDGE_CURVE('',#4099,#4115,#4117,.T.);-#4115 = VERTEX_POINT('',#4116);-#4116 = CARTESIAN_POINT('',(-0.379736328125,3.6025390625E-02,0.9350001)- );-#4117 = SURFACE_CURVE('',#4118,(#4122),.PCURVE_S1.);-#4118 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4119,#4120,#4121),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4119 = CARTESIAN_POINT('',(-0.387574869792,3.695963541667E-02,0.9350001- ));-#4120 = CARTESIAN_POINT('',(-0.383427734375,3.695963541667E-02,0.9350001- ));-#4121 = CARTESIAN_POINT('',(-0.379736328125,3.6025390625E-02,0.9350001)- );-#4122 = PCURVE('',#4006,#4123);-#4123 = DEFINITIONAL_REPRESENTATION('',(#4124),#4128);-#4124 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4125,#4126,#4127),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4125 = CARTESIAN_POINT('',(3.3860677083E-02,6.927083333334E-02));-#4126 = CARTESIAN_POINT('',(3.80078125E-02,6.927083333334E-02));-#4127 = CARTESIAN_POINT('',(4.169921875E-02,6.833658854167E-02));-#4128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4129 = ORIENTED_EDGE('',*,*,#4130,.T.);-#4130 = EDGE_CURVE('',#4115,#4131,#4133,.T.);-#4131 = VERTEX_POINT('',#4132);-#4132 = CARTESIAN_POINT('',(-0.372535807292,3.322265625E-02,0.9350001));-#4133 = SURFACE_CURVE('',#4134,(#4138),.PCURVE_S1.);-#4134 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4135,#4136,#4137),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4135 = CARTESIAN_POINT('',(-0.379736328125,3.6025390625E-02,0.9350001)- );-#4136 = CARTESIAN_POINT('',(-0.376044921875,3.509114583333E-02,0.9350001- ));-#4137 = CARTESIAN_POINT('',(-0.372535807292,3.322265625E-02,0.9350001));-#4138 = PCURVE('',#4006,#4139);-#4139 = DEFINITIONAL_REPRESENTATION('',(#4140),#4144);-#4140 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4141,#4142,#4143),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4141 = CARTESIAN_POINT('',(4.169921875E-02,6.833658854167E-02));-#4142 = CARTESIAN_POINT('',(4.5390625E-02,6.740234375E-02));-#4143 = CARTESIAN_POINT('',(4.8899739583E-02,6.553385416667E-02));-#4144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4145 = ORIENTED_EDGE('',*,*,#4146,.T.);-#4146 = EDGE_CURVE('',#4131,#4147,#4149,.T.);-#4147 = VERTEX_POINT('',#4148);-#4148 = CARTESIAN_POINT('',(-0.372535807292,2.37890625E-02,0.9350001));-#4149 = SURFACE_CURVE('',#4150,(#4154),.PCURVE_S1.);-#4150 = LINE('',#4151,#4152);-#4151 = CARTESIAN_POINT('',(-0.372535807292,3.322265625E-02,0.9350001));-#4152 = VECTOR('',#4153,1.);-#4153 = DIRECTION('',(0.,-1.,0.));-#4154 = PCURVE('',#4006,#4155);-#4155 = DEFINITIONAL_REPRESENTATION('',(#4156),#4160);-#4156 = LINE('',#4157,#4158);-#4157 = CARTESIAN_POINT('',(4.8899739583E-02,6.553385416667E-02));-#4158 = VECTOR('',#4159,1.);-#4159 = DIRECTION('',(0.,-1.));-#4160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4161 = ORIENTED_EDGE('',*,*,#4162,.T.);-#4162 = EDGE_CURVE('',#4147,#4163,#4165,.T.);-#4163 = VERTEX_POINT('',#4164);-#4164 = CARTESIAN_POINT('',(-0.379781901042,2.802734375E-02,0.9350001));-#4165 = SURFACE_CURVE('',#4166,(#4170),.PCURVE_S1.);-#4166 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4167,#4168,#4169),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4167 = CARTESIAN_POINT('',(-0.372535807292,2.37890625E-02,0.9350001));-#4168 = CARTESIAN_POINT('',(-0.375908203125,2.656901041667E-02,0.9350001- ));-#4169 = CARTESIAN_POINT('',(-0.379781901042,2.802734375E-02,0.9350001));-#4170 = PCURVE('',#4006,#4171);-#4171 = DEFINITIONAL_REPRESENTATION('',(#4172),#4176);-#4172 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4173,#4174,#4175),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4173 = CARTESIAN_POINT('',(4.8899739583E-02,5.610026041667E-02));-#4174 = CARTESIAN_POINT('',(4.552734375E-02,5.888020833334E-02));-#4175 = CARTESIAN_POINT('',(4.1653645833E-02,6.033854166667E-02));-#4176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4177 = ORIENTED_EDGE('',*,*,#4178,.T.);-#4178 = EDGE_CURVE('',#4163,#4179,#4181,.T.);-#4179 = VERTEX_POINT('',#4180);-#4180 = CARTESIAN_POINT('',(-0.387574869792,2.948567708333E-02,0.9350001- ));-#4181 = SURFACE_CURVE('',#4182,(#4186),.PCURVE_S1.);-#4182 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4183,#4184,#4185),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4183 = CARTESIAN_POINT('',(-0.379781901042,2.802734375E-02,0.9350001));-#4184 = CARTESIAN_POINT('',(-0.383655598958,2.948567708333E-02,0.9350001- ));-#4185 = CARTESIAN_POINT('',(-0.387574869792,2.948567708333E-02,0.9350001- ));-#4186 = PCURVE('',#4006,#4187);-#4187 = DEFINITIONAL_REPRESENTATION('',(#4188),#4192);-#4188 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4189,#4190,#4191),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4189 = CARTESIAN_POINT('',(4.1653645833E-02,6.033854166667E-02));-#4190 = CARTESIAN_POINT('',(3.7779947917E-02,6.1796875E-02));-#4191 = CARTESIAN_POINT('',(3.3860677083E-02,6.1796875E-02));-#4192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4193 = ORIENTED_EDGE('',*,*,#4194,.T.);-#4194 = EDGE_CURVE('',#4179,#4195,#4197,.T.);-#4195 = VERTEX_POINT('',#4196);-#4196 = CARTESIAN_POINT('',(-0.401018880208,2.255859375E-02,0.9350001));-#4197 = SURFACE_CURVE('',#4198,(#4202),.PCURVE_S1.);-#4198 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4199,#4200,#4201),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4199 = CARTESIAN_POINT('',(-0.387574869792,2.948567708333E-02,0.9350001- ));-#4200 = CARTESIAN_POINT('',(-0.396552734375,2.948567708333E-02,0.9350001- ));-#4201 = CARTESIAN_POINT('',(-0.401018880208,2.255859375E-02,0.9350001));-#4202 = PCURVE('',#4006,#4203);-#4203 = DEFINITIONAL_REPRESENTATION('',(#4204),#4208);-#4204 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4205,#4206,#4207),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4205 = CARTESIAN_POINT('',(3.3860677083E-02,6.1796875E-02));-#4206 = CARTESIAN_POINT('',(2.48828125E-02,6.1796875E-02));-#4207 = CARTESIAN_POINT('',(2.0416666667E-02,5.486979166667E-02));-#4208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4209 = ORIENTED_EDGE('',*,*,#4210,.T.);-#4210 = EDGE_CURVE('',#4195,#4211,#4213,.T.);-#4211 = VERTEX_POINT('',#4212);-#4212 = CARTESIAN_POINT('',(-0.405485026042,1.640625E-03,0.9350001));-#4213 = SURFACE_CURVE('',#4214,(#4218),.PCURVE_S1.);-#4214 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4215,#4216,#4217),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4215 = CARTESIAN_POINT('',(-0.401018880208,2.255859375E-02,0.9350001));-#4216 = CARTESIAN_POINT('',(-0.405485026042,1.563151041667E-02,0.9350001- ));-#4217 = CARTESIAN_POINT('',(-0.405485026042,1.640625E-03,0.9350001));-#4218 = PCURVE('',#4006,#4219);-#4219 = DEFINITIONAL_REPRESENTATION('',(#4220),#4224);-#4220 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4221,#4222,#4223),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4221 = CARTESIAN_POINT('',(2.0416666667E-02,5.486979166667E-02));-#4222 = CARTESIAN_POINT('',(1.5950520833E-02,4.794270833334E-02));-#4223 = CARTESIAN_POINT('',(1.5950520833E-02,3.395182291667E-02));-#4224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4225 = ORIENTED_EDGE('',*,*,#4226,.T.);-#4226 = EDGE_CURVE('',#4211,#4227,#4229,.T.);-#4227 = VERTEX_POINT('',#4228);-#4228 = CARTESIAN_POINT('',(-0.401018880208,-1.923177083333E-02,- 0.9350001));-#4229 = SURFACE_CURVE('',#4230,(#4234),.PCURVE_S1.);-#4230 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4231,#4232,#4233),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4231 = CARTESIAN_POINT('',(-0.405485026042,1.640625E-03,0.9350001));-#4232 = CARTESIAN_POINT('',(-0.405485026042,-1.23046875E-02,0.9350001));-#4233 = CARTESIAN_POINT('',(-0.401018880208,-1.923177083333E-02,- 0.9350001));-#4234 = PCURVE('',#4006,#4235);-#4235 = DEFINITIONAL_REPRESENTATION('',(#4236),#4240);-#4236 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4237,#4238,#4239),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4237 = CARTESIAN_POINT('',(1.5950520833E-02,3.395182291667E-02));-#4238 = CARTESIAN_POINT('',(1.5950520833E-02,2.000651041667E-02));-#4239 = CARTESIAN_POINT('',(2.0416666667E-02,1.307942708334E-02));-#4240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4241 = ORIENTED_EDGE('',*,*,#4242,.T.);-#4242 = EDGE_CURVE('',#4227,#4243,#4245,.T.);-#4243 = VERTEX_POINT('',#4244);-#4244 = CARTESIAN_POINT('',(-0.387574869792,-2.615885416667E-02,- 0.9350001));-#4245 = SURFACE_CURVE('',#4246,(#4250),.PCURVE_S1.);-#4246 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4247,#4248,#4249),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4247 = CARTESIAN_POINT('',(-0.401018880208,-1.923177083333E-02,- 0.9350001));-#4248 = CARTESIAN_POINT('',(-0.396552734375,-2.615885416667E-02,- 0.9350001));-#4249 = CARTESIAN_POINT('',(-0.387574869792,-2.615885416667E-02,- 0.9350001));-#4250 = PCURVE('',#4006,#4251);-#4251 = DEFINITIONAL_REPRESENTATION('',(#4252),#4256);-#4252 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4253,#4254,#4255),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4253 = CARTESIAN_POINT('',(2.0416666667E-02,1.307942708334E-02));-#4254 = CARTESIAN_POINT('',(2.48828125E-02,6.15234375E-03));-#4255 = CARTESIAN_POINT('',(3.3860677083E-02,6.15234375E-03));-#4256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4257 = ORIENTED_EDGE('',*,*,#4258,.T.);-#4258 = EDGE_CURVE('',#4243,#4259,#4261,.T.);-#4259 = VERTEX_POINT('',#4260);-#4260 = CARTESIAN_POINT('',(-0.379713541667,-2.470052083333E-02,- 0.9350001));-#4261 = SURFACE_CURVE('',#4262,(#4266),.PCURVE_S1.);-#4262 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4263,#4264,#4265),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4263 = CARTESIAN_POINT('',(-0.387574869792,-2.615885416667E-02,- 0.9350001));-#4264 = CARTESIAN_POINT('',(-0.383564453125,-2.615885416667E-02,- 0.9350001));-#4265 = CARTESIAN_POINT('',(-0.379713541667,-2.470052083333E-02,- 0.9350001));-#4266 = PCURVE('',#4006,#4267);-#4267 = DEFINITIONAL_REPRESENTATION('',(#4268),#4272);-#4268 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4269,#4270,#4271),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4269 = CARTESIAN_POINT('',(3.3860677083E-02,6.15234375E-03));-#4270 = CARTESIAN_POINT('',(3.787109375E-02,6.15234375E-03));-#4271 = CARTESIAN_POINT('',(4.1722005208E-02,7.61067708334E-03));-#4272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4273 = ORIENTED_EDGE('',*,*,#4274,.T.);-#4274 = EDGE_CURVE('',#4259,#3996,#4275,.T.);-#4275 = SURFACE_CURVE('',#4276,(#4280),.PCURVE_S1.);-#4276 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4277,#4278,#4279),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4277 = CARTESIAN_POINT('',(-0.379713541667,-2.470052083333E-02,- 0.9350001));-#4278 = CARTESIAN_POINT('',(-0.375862630208,-2.32421875E-02,0.9350001));-#4279 = CARTESIAN_POINT('',(-0.372535807292,-2.046223958333E-02,- 0.9350001));-#4280 = PCURVE('',#4006,#4281);-#4281 = DEFINITIONAL_REPRESENTATION('',(#4282),#4286);-#4282 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4283,#4284,#4285),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4283 = CARTESIAN_POINT('',(4.1722005208E-02,7.61067708334E-03));-#4284 = CARTESIAN_POINT('',(4.5572916667E-02,9.06901041667E-03));-#4285 = CARTESIAN_POINT('',(4.8899739583E-02,1.184895833334E-02));-#4286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4287 = SHELL_BASED_SURFACE_MODEL('',(#4288));-#4288 = OPEN_SHELL('',(#4289));-#4289 = ADVANCED_FACE('',(#4290),#4304,.T.);-#4290 = FACE_BOUND('',#4291,.F.);-#4291 = EDGE_LOOP('',(#4292,#4315,#4331,#4347,#4363,#4379));-#4292 = ORIENTED_EDGE('',*,*,#4293,.T.);-#4293 = EDGE_CURVE('',#4294,#4296,#4298,.T.);-#4294 = VERTEX_POINT('',#4295);-#4295 = CARTESIAN_POINT('',(-0.355445963542,-3.231119791667E-02,- 0.9350001));-#4296 = VERTEX_POINT('',#4297);-#4297 = CARTESIAN_POINT('',(-0.355445963542,3.572916666667E-02,0.9350001- ));-#4298 = SURFACE_CURVE('',#4299,(#4303),.PCURVE_S1.);-#4299 = LINE('',#4300,#4301);-#4300 = CARTESIAN_POINT('',(-0.355445963542,-3.231119791667E-02,- 0.9350001));-#4301 = VECTOR('',#4302,1.);-#4302 = DIRECTION('',(0.,1.,0.));-#4303 = PCURVE('',#4304,#4309);-#4304 = PLANE('',#4305);-#4305 = AXIS2_PLACEMENT_3D('',#4306,#4307,#4308);-#4306 = CARTESIAN_POINT('',(-0.365244140625,-3.231119791667E-02,- 0.9350001));-#4307 = DIRECTION('',(0.,0.,1.));-#4308 = DIRECTION('',(1.,0.,-0.));-#4309 = DEFINITIONAL_REPRESENTATION('',(#4310),#4314);-#4310 = LINE('',#4311,#4312);-#4311 = CARTESIAN_POINT('',(9.798177083E-03,0.));-#4312 = VECTOR('',#4313,1.);-#4313 = DIRECTION('',(0.,1.));-#4314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4315 = ORIENTED_EDGE('',*,*,#4316,.T.);-#4316 = EDGE_CURVE('',#4296,#4317,#4319,.T.);-#4317 = VERTEX_POINT('',#4318);-#4318 = CARTESIAN_POINT('',(-0.346194661458,3.572916666667E-02,0.9350001- ));-#4319 = SURFACE_CURVE('',#4320,(#4324),.PCURVE_S1.);-#4320 = LINE('',#4321,#4322);-#4321 = CARTESIAN_POINT('',(-0.355445963542,3.572916666667E-02,0.9350001- ));-#4322 = VECTOR('',#4323,1.);-#4323 = DIRECTION('',(1.,0.,0.));-#4324 = PCURVE('',#4304,#4325);-#4325 = DEFINITIONAL_REPRESENTATION('',(#4326),#4330);-#4326 = LINE('',#4327,#4328);-#4327 = CARTESIAN_POINT('',(9.798177083E-03,6.804036458334E-02));-#4328 = VECTOR('',#4329,1.);-#4329 = DIRECTION('',(1.,0.));-#4330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4331 = ORIENTED_EDGE('',*,*,#4332,.T.);-#4332 = EDGE_CURVE('',#4317,#4333,#4335,.T.);-#4333 = VERTEX_POINT('',#4334);-#4334 = CARTESIAN_POINT('',(-0.346194661458,-2.456380208333E-02,- 0.9350001));-#4335 = SURFACE_CURVE('',#4336,(#4340),.PCURVE_S1.);-#4336 = LINE('',#4337,#4338);-#4337 = CARTESIAN_POINT('',(-0.346194661458,3.572916666667E-02,0.9350001- ));-#4338 = VECTOR('',#4339,1.);-#4339 = DIRECTION('',(0.,-1.,0.));-#4340 = PCURVE('',#4304,#4341);-#4341 = DEFINITIONAL_REPRESENTATION('',(#4342),#4346);-#4342 = LINE('',#4343,#4344);-#4343 = CARTESIAN_POINT('',(1.9049479167E-02,6.804036458334E-02));-#4344 = VECTOR('',#4345,1.);-#4345 = DIRECTION('',(0.,-1.));-#4346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4347 = ORIENTED_EDGE('',*,*,#4348,.T.);-#4348 = EDGE_CURVE('',#4333,#4349,#4351,.T.);-#4349 = VERTEX_POINT('',#4350);-#4350 = CARTESIAN_POINT('',(-0.313336588542,-2.456380208333E-02,- 0.9350001));-#4351 = SURFACE_CURVE('',#4352,(#4356),.PCURVE_S1.);-#4352 = LINE('',#4353,#4354);-#4353 = CARTESIAN_POINT('',(-0.346194661458,-2.456380208333E-02,- 0.9350001));-#4354 = VECTOR('',#4355,1.);-#4355 = DIRECTION('',(1.,0.,0.));-#4356 = PCURVE('',#4304,#4357);-#4357 = DEFINITIONAL_REPRESENTATION('',(#4358),#4362);-#4358 = LINE('',#4359,#4360);-#4359 = CARTESIAN_POINT('',(1.9049479167E-02,7.74739583334E-03));-#4360 = VECTOR('',#4361,1.);-#4361 = DIRECTION('',(1.,0.));-#4362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4363 = ORIENTED_EDGE('',*,*,#4364,.T.);-#4364 = EDGE_CURVE('',#4349,#4365,#4367,.T.);-#4365 = VERTEX_POINT('',#4366);-#4366 = CARTESIAN_POINT('',(-0.313336588542,-3.231119791667E-02,- 0.9350001));-#4367 = SURFACE_CURVE('',#4368,(#4372),.PCURVE_S1.);-#4368 = LINE('',#4369,#4370);-#4369 = CARTESIAN_POINT('',(-0.313336588542,-2.456380208333E-02,- 0.9350001));-#4370 = VECTOR('',#4371,1.);-#4371 = DIRECTION('',(0.,-1.,0.));-#4372 = PCURVE('',#4304,#4373);-#4373 = DEFINITIONAL_REPRESENTATION('',(#4374),#4378);-#4374 = LINE('',#4375,#4376);-#4375 = CARTESIAN_POINT('',(5.1907552083E-02,7.74739583334E-03));-#4376 = VECTOR('',#4377,1.);-#4377 = DIRECTION('',(0.,-1.));-#4378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4379 = ORIENTED_EDGE('',*,*,#4380,.T.);-#4380 = EDGE_CURVE('',#4365,#4294,#4381,.T.);-#4381 = SURFACE_CURVE('',#4382,(#4386),.PCURVE_S1.);-#4382 = LINE('',#4383,#4384);-#4383 = CARTESIAN_POINT('',(-0.313336588542,-3.231119791667E-02,- 0.9350001));-#4384 = VECTOR('',#4385,1.);-#4385 = DIRECTION('',(-1.,0.,0.));-#4386 = PCURVE('',#4304,#4387);-#4387 = DEFINITIONAL_REPRESENTATION('',(#4388),#4392);+#3960 = DIRECTION('',(1.,0.,0.));+#3961 = PCURVE('',#3962,#3967);+#3962 = PLANE('',#3963);+#3963 = AXIS2_PLACEMENT_3D('',#3964,#3965,#3966);+#3964 = CARTESIAN_POINT('',(-0.30905276528,0.592688573852,0.59710515));+#3965 = DIRECTION('',(0.,0.,1.));+#3966 = DIRECTION('',(1.,0.,-0.));+#3967 = DEFINITIONAL_REPRESENTATION('',(#3968),#3972);+#3968 = LINE('',#3969,#3970);+#3969 = CARTESIAN_POINT('',(1.6998699616E-02,7.747396608E-03));+#3970 = VECTOR('',#3971,1.);+#3971 = DIRECTION('',(1.,0.));+#3972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3973 = ORIENTED_EDGE('',*,*,#3974,.T.);+#3974 = EDGE_CURVE('',#3954,#3975,#3977,.T.);+#3975 = VERTEX_POINT('',#3976);+#3976 = CARTESIAN_POINT('',(-0.260791041704,0.592688573852,0.59710515));+#3977 = SURFACE_CURVE('',#3978,(#3982),.PCURVE_S1.);+#3978 = LINE('',#3979,#3980);+#3979 = CARTESIAN_POINT('',(-0.260791041704,0.60043597046,0.59710515));+#3980 = VECTOR('',#3981,1.);+#3981 = DIRECTION('',(0.,-1.,0.));+#3982 = PCURVE('',#3962,#3983);+#3983 = DEFINITIONAL_REPRESENTATION('',(#3984),#3988);+#3984 = LINE('',#3985,#3986);+#3985 = CARTESIAN_POINT('',(4.8261723576E-02,7.747396608E-03));+#3986 = VECTOR('',#3987,1.);+#3987 = DIRECTION('',(0.,-1.));+#3988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3989 = ORIENTED_EDGE('',*,*,#3990,.T.);+#3990 = EDGE_CURVE('',#3975,#3991,#3993,.T.);+#3991 = VERTEX_POINT('',#3992);+#3992 = CARTESIAN_POINT('',(-0.302125681254,0.592688573852,0.59710515));+#3993 = SURFACE_CURVE('',#3994,(#3998),.PCURVE_S1.);+#3994 = LINE('',#3995,#3996);+#3995 = CARTESIAN_POINT('',(-0.260791041704,0.592688573852,0.59710515));+#3996 = VECTOR('',#3997,1.);+#3997 = DIRECTION('',(-1.,0.,0.));+#3998 = PCURVE('',#3962,#3999);+#3999 = DEFINITIONAL_REPRESENTATION('',(#4000),#4004);+#4000 = LINE('',#4001,#4002);+#4001 = CARTESIAN_POINT('',(4.8261723576E-02,0.));+#4002 = VECTOR('',#4003,1.);+#4003 = DIRECTION('',(-1.,0.));+#4004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4005 = ORIENTED_EDGE('',*,*,#4006,.T.);+#4006 = EDGE_CURVE('',#3991,#4007,#4009,.T.);+#4007 = VERTEX_POINT('',#4008);+#4008 = CARTESIAN_POINT('',(-0.302125681254,0.60043597046,0.59710515));+#4009 = SURFACE_CURVE('',#4010,(#4014),.PCURVE_S1.);+#4010 = LINE('',#4011,#4012);+#4011 = CARTESIAN_POINT('',(-0.302125681254,0.592688573852,0.59710515));+#4012 = VECTOR('',#4013,1.);+#4013 = DIRECTION('',(0.,1.,0.));+#4014 = PCURVE('',#3962,#4015);+#4015 = DEFINITIONAL_REPRESENTATION('',(#4016),#4020);+#4016 = LINE('',#4017,#4018);+#4017 = CARTESIAN_POINT('',(6.927084026E-03,0.));+#4018 = VECTOR('',#4019,1.);+#4019 = DIRECTION('',(0.,1.));+#4020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4021 = ORIENTED_EDGE('',*,*,#4022,.T.);+#4022 = EDGE_CURVE('',#4007,#4023,#4025,.T.);+#4023 = VERTEX_POINT('',#4024);+#4024 = CARTESIAN_POINT('',(-0.287223336014,0.616295347046,0.59710515));+#4025 = SURFACE_CURVE('',#4026,(#4030),.PCURVE_S1.);+#4026 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4027,#4028,#4029),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4027 = CARTESIAN_POINT('',(-0.302125681254,0.60043597046,0.59710515));+#4028 = CARTESIAN_POINT('',(-0.293603544985,0.609413835941,0.59710515));+#4029 = CARTESIAN_POINT('',(-0.287223336014,0.616295347046,0.59710515));+#4030 = PCURVE('',#3962,#4031);+#4031 = DEFINITIONAL_REPRESENTATION('',(#4032),#4036);+#4032 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4033,#4034,#4035),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4033 = CARTESIAN_POINT('',(6.927084026E-03,7.747396608E-03));+#4034 = CARTESIAN_POINT('',(1.5449220295E-02,1.6725262089E-02));+#4035 = CARTESIAN_POINT('',(2.1829429266E-02,2.3606773194E-02));+#4036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4037 = ORIENTED_EDGE('',*,*,#4038,.T.);+#4038 = EDGE_CURVE('',#4023,#4039,#4041,.T.);+#4039 = VERTEX_POINT('',#4040);+#4040 = CARTESIAN_POINT('',(-0.278427762218,0.626002379267,0.59710515));+#4041 = SURFACE_CURVE('',#4042,(#4046),.PCURVE_S1.);+#4042 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4043,#4044,#4045),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4043 = CARTESIAN_POINT('',(-0.287223336014,0.616295347046,0.59710515));+#4044 = CARTESIAN_POINT('',(-0.280843127043,0.623176858151,0.59710515));+#4045 = CARTESIAN_POINT('',(-0.278427762218,0.626002379267,0.59710515));+#4046 = PCURVE('',#3962,#4047);+#4047 = DEFINITIONAL_REPRESENTATION('',(#4048),#4052);+#4048 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4049,#4050,#4051),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4049 = CARTESIAN_POINT('',(2.1829429266E-02,2.3606773194E-02));+#4050 = CARTESIAN_POINT('',(2.8209638237E-02,3.0488284299E-02));+#4051 = CARTESIAN_POINT('',(3.0625003062E-02,3.3313805415E-02));+#4052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4053 = ORIENTED_EDGE('',*,*,#4054,.T.);+#4054 = EDGE_CURVE('',#4039,#4055,#4057,.T.);+#4055 = VERTEX_POINT('',#4056);+#4056 = CARTESIAN_POINT('',(-0.272275417853,0.635003031209,0.59710515));+#4057 = SURFACE_CURVE('',#4058,(#4062),.PCURVE_S1.);+#4058 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4059,#4060,#4061),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4059 = CARTESIAN_POINT('',(-0.278427762218,0.626002379267,0.59710515));+#4060 = CARTESIAN_POINT('',(-0.273870470095,0.631562275656,0.59710515));+#4061 = CARTESIAN_POINT('',(-0.272275417853,0.635003031209,0.59710515));+#4062 = PCURVE('',#3962,#4063);+#4063 = DEFINITIONAL_REPRESENTATION('',(#4064),#4068);+#4064 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4065,#4066,#4067),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4065 = CARTESIAN_POINT('',(3.0625003062E-02,3.3313805415E-02));+#4066 = CARTESIAN_POINT('',(3.5182295185E-02,3.8873701804E-02));+#4067 = CARTESIAN_POINT('',(3.6777347427E-02,4.2314457357E-02));+#4068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4069 = ORIENTED_EDGE('',*,*,#4070,.T.);+#4070 = EDGE_CURVE('',#4055,#4071,#4073,.T.);+#4071 = VERTEX_POINT('',#4072);+#4072 = CARTESIAN_POINT('',(-0.27068036561,0.642044047538,0.59710515));+#4073 = SURFACE_CURVE('',#4074,(#4078),.PCURVE_S1.);+#4074 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4075,#4076,#4077),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4075 = CARTESIAN_POINT('',(-0.272275417853,0.635003031209,0.59710515));+#4076 = CARTESIAN_POINT('',(-0.27068036561,0.638443786761,0.59710515));+#4077 = CARTESIAN_POINT('',(-0.27068036561,0.642044047538,0.59710515));+#4078 = PCURVE('',#3962,#4079);+#4079 = DEFINITIONAL_REPRESENTATION('',(#4080),#4084);+#4080 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4081,#4082,#4083),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4081 = CARTESIAN_POINT('',(3.6777347427E-02,4.2314457357E-02));+#4082 = CARTESIAN_POINT('',(3.837239967E-02,4.5755212909E-02));+#4083 = CARTESIAN_POINT('',(3.837239967E-02,4.9355473686E-02));+#4084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4085 = ORIENTED_EDGE('',*,*,#4086,.T.);+#4086 = EDGE_CURVE('',#4071,#4087,#4089,.T.);+#4087 = VERTEX_POINT('',#4088);+#4088 = CARTESIAN_POINT('',(-0.27402997532,0.650976340098,0.59710515));+#4089 = SURFACE_CURVE('',#4090,(#4094),.PCURVE_S1.);+#4090 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4091,#4092,#4093),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4091 = CARTESIAN_POINT('',(-0.27068036561,0.642044047538,0.59710515));+#4092 = CARTESIAN_POINT('',(-0.27068036561,0.647740662691,0.59710515));+#4093 = CARTESIAN_POINT('',(-0.27402997532,0.650976340098,0.59710515));+#4094 = PCURVE('',#3962,#4095);+#4095 = DEFINITIONAL_REPRESENTATION('',(#4096),#4100);+#4096 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4097,#4098,#4099),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4097 = CARTESIAN_POINT('',(3.837239967E-02,4.9355473686E-02));+#4098 = CARTESIAN_POINT('',(3.837239967E-02,5.5052088839E-02));+#4099 = CARTESIAN_POINT('',(3.502278996E-02,5.8287766246E-02));+#4100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4101 = ORIENTED_EDGE('',*,*,#4102,.T.);+#4102 = EDGE_CURVE('',#4087,#4103,#4105,.T.);+#4103 = VERTEX_POINT('',#4104);+#4104 = CARTESIAN_POINT('',(-0.283212918946,0.654212017505,0.59710515));+#4105 = SURFACE_CURVE('',#4106,(#4110),.PCURVE_S1.);+#4106 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4107,#4108,#4109),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4107 = CARTESIAN_POINT('',(-0.27402997532,0.650976340098,0.59710515));+#4108 = CARTESIAN_POINT('',(-0.27737958503,0.654212017505,0.59710515));+#4109 = CARTESIAN_POINT('',(-0.283212918946,0.654212017505,0.59710515));+#4110 = PCURVE('',#3962,#4111);+#4111 = DEFINITIONAL_REPRESENTATION('',(#4112),#4116);+#4112 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4113,#4114,#4115),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4113 = CARTESIAN_POINT('',(3.502278996E-02,5.8287766246E-02));+#4114 = CARTESIAN_POINT('',(3.167318025E-02,6.1523443653E-02));+#4115 = CARTESIAN_POINT('',(2.5839846334E-02,6.1523443653E-02));+#4116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4117 = ORIENTED_EDGE('',*,*,#4118,.T.);+#4118 = EDGE_CURVE('',#4103,#4119,#4121,.T.);+#4119 = VERTEX_POINT('',#4120);+#4120 = CARTESIAN_POINT('',(-0.2919173469,0.652708111104,0.59710515));+#4121 = SURFACE_CURVE('',#4122,(#4126),.PCURVE_S1.);+#4122 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4123,#4124,#4125),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4123 = CARTESIAN_POINT('',(-0.283212918946,0.654212017505,0.59710515));+#4124 = CARTESIAN_POINT('',(-0.287360054778,0.654212017505,0.59710515));+#4125 = CARTESIAN_POINT('',(-0.2919173469,0.652708111104,0.59710515));+#4126 = PCURVE('',#3962,#4127);+#4127 = DEFINITIONAL_REPRESENTATION('',(#4128),#4132);+#4128 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4129,#4130,#4131),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4129 = CARTESIAN_POINT('',(2.5839846334E-02,6.1523443653E-02));+#4130 = CARTESIAN_POINT('',(2.1692710502E-02,6.1523443653E-02));+#4131 = CARTESIAN_POINT('',(1.713541838E-02,6.0019537252E-02));+#4132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4133 = ORIENTED_EDGE('',*,*,#4134,.T.);+#4134 = EDGE_CURVE('',#4119,#4135,#4137,.T.);+#4135 = VERTEX_POINT('',#4136);+#4136 = CARTESIAN_POINT('',(-0.3015788062,0.648150818982,0.59710515));+#4137 = SURFACE_CURVE('',#4138,(#4142),.PCURVE_S1.);+#4138 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4139,#4140,#4141),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4139 = CARTESIAN_POINT('',(-0.2919173469,0.652708111104,0.59710515));+#4140 = CARTESIAN_POINT('',(-0.296474639022,0.651204204704,0.59710515));+#4141 = CARTESIAN_POINT('',(-0.3015788062,0.648150818982,0.59710515));+#4142 = PCURVE('',#3962,#4143);+#4143 = DEFINITIONAL_REPRESENTATION('',(#4144),#4148);+#4144 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4145,#4146,#4147),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4145 = CARTESIAN_POINT('',(1.713541838E-02,6.0019537252E-02));+#4146 = CARTESIAN_POINT('',(1.2578126258E-02,5.8515630852E-02));+#4147 = CARTESIAN_POINT('',(7.47395908E-03,5.546224513E-02));+#4148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4149 = ORIENTED_EDGE('',*,*,#4150,.T.);+#4150 = EDGE_CURVE('',#4135,#4151,#4153,.T.);+#4151 = VERTEX_POINT('',#4152);+#4152 = CARTESIAN_POINT('',(-0.3015788062,0.657447694911,0.59710515));+#4153 = SURFACE_CURVE('',#4154,(#4158),.PCURVE_S1.);+#4154 = LINE('',#4155,#4156);+#4155 = CARTESIAN_POINT('',(-0.3015788062,0.648150818982,0.59710515));+#4156 = VECTOR('',#4157,1.);+#4157 = DIRECTION('',(0.,1.,0.));+#4158 = PCURVE('',#3962,#4159);+#4159 = DEFINITIONAL_REPRESENTATION('',(#4160),#4164);+#4160 = LINE('',#4161,#4162);+#4161 = CARTESIAN_POINT('',(7.47395908E-03,5.546224513E-02));+#4162 = VECTOR('',#4163,1.);+#4163 = DIRECTION('',(0.,1.));+#4164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4165 = ORIENTED_EDGE('',*,*,#4166,.T.);+#4166 = EDGE_CURVE('',#4151,#4167,#4169,.T.);+#4167 = VERTEX_POINT('',#4168);+#4168 = CARTESIAN_POINT('',(-0.292350289652,0.660820091082,0.59710515));+#4169 = SURFACE_CURVE('',#4170,(#4174),.PCURVE_S1.);+#4170 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4171,#4172,#4173),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4171 = CARTESIAN_POINT('',(-0.3015788062,0.657447694911,0.59710515));+#4172 = CARTESIAN_POINT('',(-0.296884795313,0.659680768051,0.59710515));+#4173 = CARTESIAN_POINT('',(-0.292350289652,0.660820091082,0.59710515));+#4174 = PCURVE('',#3962,#4175);+#4175 = DEFINITIONAL_REPRESENTATION('',(#4176),#4180);+#4176 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4177,#4178,#4179),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4177 = CARTESIAN_POINT('',(7.47395908E-03,6.4759121059E-02));+#4178 = CARTESIAN_POINT('',(1.2167969967E-02,6.6992194199E-02));+#4179 = CARTESIAN_POINT('',(1.6702475628E-02,6.813151723E-02));+#4180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4181 = ORIENTED_EDGE('',*,*,#4182,.T.);+#4182 = EDGE_CURVE('',#4167,#4183,#4185,.T.);+#4183 = VERTEX_POINT('',#4184);+#4184 = CARTESIAN_POINT('',(-0.283395210631,0.661959414113,0.59710515));+#4185 = SURFACE_CURVE('',#4186,(#4190),.PCURVE_S1.);+#4186 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4187,#4188,#4189),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4187 = CARTESIAN_POINT('',(-0.292350289652,0.660820091082,0.59710515));+#4188 = CARTESIAN_POINT('',(-0.28781578399,0.661959414113,0.59710515));+#4189 = CARTESIAN_POINT('',(-0.283395210631,0.661959414113,0.59710515));+#4190 = PCURVE('',#3962,#4191);+#4191 = DEFINITIONAL_REPRESENTATION('',(#4192),#4196);+#4192 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4193,#4194,#4195),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4193 = CARTESIAN_POINT('',(1.6702475628E-02,6.813151723E-02));+#4194 = CARTESIAN_POINT('',(2.123698129E-02,6.9270840261E-02));+#4195 = CARTESIAN_POINT('',(2.5657554649E-02,6.9270840261E-02));+#4196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4197 = ORIENTED_EDGE('',*,*,#4198,.T.);+#4198 = EDGE_CURVE('',#4183,#4199,#4201,.T.);+#4199 = VERTEX_POINT('',#4200);+#4200 = CARTESIAN_POINT('',(-0.2673307559,0.65665016879,0.59710515));+#4201 = SURFACE_CURVE('',#4202,(#4206),.PCURVE_S1.);+#4202 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4203,#4204,#4205),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4203 = CARTESIAN_POINT('',(-0.283395210631,0.661959414113,0.59710515));+#4204 = CARTESIAN_POINT('',(-0.273414740883,0.661959414113,0.59710515));+#4205 = CARTESIAN_POINT('',(-0.2673307559,0.65665016879,0.59710515));+#4206 = PCURVE('',#3962,#4207);+#4207 = DEFINITIONAL_REPRESENTATION('',(#4208),#4212);+#4208 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4209,#4210,#4211),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4209 = CARTESIAN_POINT('',(2.5657554649E-02,6.9270840261E-02));+#4210 = CARTESIAN_POINT('',(3.5638024397E-02,6.9270840261E-02));+#4211 = CARTESIAN_POINT('',(4.172200938E-02,6.3961594938E-02));+#4212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4213 = ORIENTED_EDGE('',*,*,#4214,.T.);+#4214 = EDGE_CURVE('',#4199,#4215,#4217,.T.);+#4215 = VERTEX_POINT('',#4216);+#4216 = CARTESIAN_POINT('',(-0.261246770916,0.642727641356,0.59710515));+#4217 = SURFACE_CURVE('',#4218,(#4222),.PCURVE_S1.);+#4218 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4219,#4220,#4221),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4219 = CARTESIAN_POINT('',(-0.2673307559,0.65665016879,0.59710515));+#4220 = CARTESIAN_POINT('',(-0.261246770916,0.651340923467,0.59710515));+#4221 = CARTESIAN_POINT('',(-0.261246770916,0.642727641356,0.59710515));+#4222 = PCURVE('',#3962,#4223);+#4223 = DEFINITIONAL_REPRESENTATION('',(#4224),#4228);+#4224 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4225,#4226,#4227),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4225 = CARTESIAN_POINT('',(4.172200938E-02,6.3961594938E-02));+#4226 = CARTESIAN_POINT('',(4.7805994364E-02,5.8652349615E-02));+#4227 = CARTESIAN_POINT('',(4.7805994364E-02,5.0039067504E-02));+#4228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4229 = ORIENTED_EDGE('',*,*,#4230,.T.);+#4230 = EDGE_CURVE('',#4215,#4231,#4233,.T.);+#4231 = VERTEX_POINT('',#4232);+#4232 = CARTESIAN_POINT('',(-0.263274765911,0.633977640481,0.59710515));+#4233 = SURFACE_CURVE('',#4234,(#4238),.PCURVE_S1.);+#4234 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4235,#4236,#4237),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4235 = CARTESIAN_POINT('',(-0.261246770916,0.642727641356,0.59710515));+#4236 = CARTESIAN_POINT('',(-0.261246770916,0.638352640919,0.59710515));+#4237 = CARTESIAN_POINT('',(-0.263274765911,0.633977640481,0.59710515));+#4238 = PCURVE('',#3962,#4239);+#4239 = DEFINITIONAL_REPRESENTATION('',(#4240),#4244);+#4240 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4241,#4242,#4243),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4241 = CARTESIAN_POINT('',(4.7805994364E-02,5.0039067504E-02));+#4242 = CARTESIAN_POINT('',(4.7805994364E-02,4.5664067067E-02));+#4243 = CARTESIAN_POINT('',(4.5777999369E-02,4.1289066629E-02));+#4244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4245 = ORIENTED_EDGE('',*,*,#4246,.T.);+#4246 = EDGE_CURVE('',#4231,#4247,#4249,.T.);+#4247 = VERTEX_POINT('',#4248);+#4248 = CARTESIAN_POINT('',(-0.269860053028,0.624316181182,0.59710515));+#4249 = SURFACE_CURVE('',#4250,(#4254),.PCURVE_S1.);+#4250 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4251,#4252,#4253),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4251 = CARTESIAN_POINT('',(-0.263274765911,0.633977640481,0.59710515));+#4252 = CARTESIAN_POINT('',(-0.265302760905,0.629602640044,0.59710515));+#4253 = CARTESIAN_POINT('',(-0.269860053028,0.624316181182,0.59710515));+#4254 = PCURVE('',#3962,#4255);+#4255 = DEFINITIONAL_REPRESENTATION('',(#4256),#4260);+#4256 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4257,#4258,#4259),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4257 = CARTESIAN_POINT('',(4.5777999369E-02,4.1289066629E-02));+#4258 = CARTESIAN_POINT('',(4.3750004375E-02,3.6914066192E-02));+#4259 = CARTESIAN_POINT('',(3.9192712252E-02,3.162760733E-02));+#4260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4261 = ORIENTED_EDGE('',*,*,#4262,.T.);+#4262 = EDGE_CURVE('',#4247,#4263,#4265,.T.);+#4263 = VERTEX_POINT('',#4264);+#4264 = CARTESIAN_POINT('',(-0.277265652727,0.616113055361,0.59710515));+#4265 = SURFACE_CURVE('',#4266,(#4270),.PCURVE_S1.);+#4266 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4267,#4268,#4269),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4267 = CARTESIAN_POINT('',(-0.269860053028,0.624316181182,0.59710515));+#4268 = CARTESIAN_POINT('',(-0.272412136616,0.621353941302,0.59710515));+#4269 = CARTESIAN_POINT('',(-0.277265652727,0.616113055361,0.59710515));+#4270 = PCURVE('',#3962,#4271);+#4271 = DEFINITIONAL_REPRESENTATION('',(#4272),#4276);+#4272 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4273,#4274,#4275),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4273 = CARTESIAN_POINT('',(3.9192712252E-02,3.162760733E-02));+#4274 = CARTESIAN_POINT('',(3.6640628664E-02,2.866536745E-02));+#4275 = CARTESIAN_POINT('',(3.1787112553E-02,2.3424481509E-02));+#4276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4277 = ORIENTED_EDGE('',*,*,#4278,.T.);+#4278 = EDGE_CURVE('',#4263,#3952,#4279,.T.);+#4279 = SURFACE_CURVE('',#4280,(#4284),.PCURVE_S1.);+#4280 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4281,#4282,#4283),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4281 = CARTESIAN_POINT('',(-0.277265652727,0.616113055361,0.59710515));+#4282 = CARTESIAN_POINT('',(-0.282119168837,0.610872169421,0.59710515));+#4283 = CARTESIAN_POINT('',(-0.292054065664,0.60043597046,0.59710515));+#4284 = PCURVE('',#3962,#4285);+#4285 = DEFINITIONAL_REPRESENTATION('',(#4286),#4290);+#4286 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4287,#4288,#4289),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4287 = CARTESIAN_POINT('',(3.1787112553E-02,2.3424481509E-02));+#4288 = CARTESIAN_POINT('',(2.6933596443E-02,1.8183595569E-02));+#4289 = CARTESIAN_POINT('',(1.6998699616E-02,7.747396608E-03));+#4290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4291 = SHELL_BASED_SURFACE_MODEL('',(#4292));+#4292 = OPEN_SHELL('',(#4293));+#4293 = ADVANCED_FACE('',(#4294),#4308,.T.);+#4294 = FACE_BOUND('',#4295,.F.);+#4295 = EDGE_LOOP('',(#4296,#4319,#4335,#4351,#4367,#4383,#4399,#4415,+ #4431,#4447,#4463));+#4296 = ORIENTED_EDGE('',*,*,#4297,.T.);+#4297 = EDGE_CURVE('',#4298,#4300,#4302,.T.);+#4298 = VERTEX_POINT('',#4299);+#4299 = CARTESIAN_POINT('',(-0.240556664681,0.592688573852,0.59710515));+#4300 = VERTEX_POINT('',#4301);+#4301 = CARTESIAN_POINT('',(-0.240556664681,0.60043597046,0.59710515));+#4302 = SURFACE_CURVE('',#4303,(#4307),.PCURVE_S1.);+#4303 = LINE('',#4304,#4305);+#4304 = CARTESIAN_POINT('',(-0.240556664681,0.592688573852,0.59710515));+#4305 = VECTOR('',#4306,1.);+#4306 = DIRECTION('',(0.,1.,0.));+#4307 = PCURVE('',#4308,#4313);+#4308 = PLANE('',#4309);+#4309 = AXIS2_PLACEMENT_3D('',#4310,#4311,#4312);+#4310 = CARTESIAN_POINT('',(-0.252861353411,0.592688573852,0.59710515));+#4311 = DIRECTION('',(0.,0.,1.));+#4312 = DIRECTION('',(1.,0.,-0.));+#4313 = DEFINITIONAL_REPRESENTATION('',(#4314),#4318);+#4314 = LINE('',#4315,#4316);+#4315 = CARTESIAN_POINT('',(1.230468873E-02,0.));+#4316 = VECTOR('',#4317,1.);+#4317 = DIRECTION('',(0.,1.));+#4318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4319 = ORIENTED_EDGE('',*,*,#4320,.T.);+#4320 = EDGE_CURVE('',#4300,#4321,#4323,.T.);+#4321 = VERTEX_POINT('',#4322);+#4322 = CARTESIAN_POINT('',(-0.226246767416,0.60043597046,0.59710515));+#4323 = SURFACE_CURVE('',#4324,(#4328),.PCURVE_S1.);+#4324 = LINE('',#4325,#4326);+#4325 = CARTESIAN_POINT('',(-0.240556664681,0.60043597046,0.59710515));+#4326 = VECTOR('',#4327,1.);+#4327 = DIRECTION('',(1.,0.,0.));+#4328 = PCURVE('',#4308,#4329);+#4329 = DEFINITIONAL_REPRESENTATION('',(#4330),#4334);+#4330 = LINE('',#4331,#4332);+#4331 = CARTESIAN_POINT('',(1.230468873E-02,7.747396608E-03));+#4332 = VECTOR('',#4333,1.);+#4333 = DIRECTION('',(1.,0.));+#4334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4335 = ORIENTED_EDGE('',*,*,#4336,.T.);+#4336 = EDGE_CURVE('',#4321,#4337,#4339,.T.);+#4337 = VERTEX_POINT('',#4338);+#4338 = CARTESIAN_POINT('',(-0.226246767416,0.652434673577,0.59710515));+#4339 = SURFACE_CURVE('',#4340,(#4344),.PCURVE_S1.);+#4340 = LINE('',#4341,#4342);+#4341 = CARTESIAN_POINT('',(-0.226246767416,0.60043597046,0.59710515));+#4342 = VECTOR('',#4343,1.);+#4343 = DIRECTION('',(0.,1.,0.));+#4344 = PCURVE('',#4308,#4345);+#4345 = DEFINITIONAL_REPRESENTATION('',(#4346),#4350);+#4346 = LINE('',#4347,#4348);+#4347 = CARTESIAN_POINT('',(2.6614585995E-02,7.747396608E-03));+#4348 = VECTOR('',#4349,1.);+#4349 = DIRECTION('',(0.,1.));+#4350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4351 = ORIENTED_EDGE('',*,*,#4352,.T.);+#4352 = EDGE_CURVE('',#4337,#4353,#4355,.T.);+#4353 = VERTEX_POINT('',#4354);+#4354 = CARTESIAN_POINT('',(-0.24165041479,0.648971131564,0.59710515));+#4355 = SURFACE_CURVE('',#4356,(#4360),.PCURVE_S1.);+#4356 = LINE('',#4357,#4358);+#4357 = CARTESIAN_POINT('',(-0.226246767416,0.652434673577,0.59710515));+#4358 = VECTOR('',#4359,1.);+#4359 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));+#4360 = PCURVE('',#4308,#4361);+#4361 = DEFINITIONAL_REPRESENTATION('',(#4362),#4366);+#4362 = LINE('',#4363,#4364);+#4363 = CARTESIAN_POINT('',(2.6614585995E-02,5.9746099725E-02));+#4364 = VECTOR('',#4365,1.);+#4365 = DIRECTION('',(-0.97564065493,-0.219374821819));+#4366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4367 = ORIENTED_EDGE('',*,*,#4368,.T.);+#4368 = EDGE_CURVE('',#4353,#4369,#4371,.T.);+#4369 = VERTEX_POINT('',#4370);+#4370 = CARTESIAN_POINT('',(-0.24165041479,0.657356549069,0.59710515));+#4371 = SURFACE_CURVE('',#4372,(#4376),.PCURVE_S1.);+#4372 = LINE('',#4373,#4374);+#4373 = CARTESIAN_POINT('',(-0.24165041479,0.648971131564,0.59710515));+#4374 = VECTOR('',#4375,1.);+#4375 = DIRECTION('',(0.,1.,0.));+#4376 = PCURVE('',#4308,#4377);+#4377 = DEFINITIONAL_REPRESENTATION('',(#4378),#4382);+#4378 = LINE('',#4379,#4380);+#4379 = CARTESIAN_POINT('',(1.1210938621E-02,5.6282557712E-02));+#4380 = VECTOR('',#4381,1.);+#4381 = DIRECTION('',(0.,1.));+#4382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4383 = ORIENTED_EDGE('',*,*,#4384,.T.);+#4384 = EDGE_CURVE('',#4369,#4385,#4387,.T.);+#4385 = VERTEX_POINT('',#4386);+#4386 = CARTESIAN_POINT('',(-0.226337913259,0.66072894524,0.59710515));+#4387 = SURFACE_CURVE('',#4388,(#4392),.PCURVE_S1.); #4388 = LINE('',#4389,#4390);-#4389 = CARTESIAN_POINT('',(5.1907552083E-02,0.));+#4389 = CARTESIAN_POINT('',(-0.24165041479,0.657356549069,0.59710515)); #4390 = VECTOR('',#4391,1.);-#4391 = DIRECTION('',(-1.,0.));-#4392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4393 = SHELL_BASED_SURFACE_MODEL('',(#4394));-#4394 = OPEN_SHELL('',(#4395));-#4395 = ADVANCED_FACE('',(#4396),#4410,.T.);-#4396 = FACE_BOUND('',#4397,.F.);-#4397 = EDGE_LOOP('',(#4398,#4421,#4437,#4453,#4469,#4485,#4501,#4517,- #4533,#4549,#4565,#4581,#4597,#4613,#4629,#4645,#4661,#4677,#4693,- #4709,#4725));-#4398 = ORIENTED_EDGE('',*,*,#4399,.T.);-#4399 = EDGE_CURVE('',#4400,#4402,#4404,.T.);-#4400 = VERTEX_POINT('',#4401);-#4401 = CARTESIAN_POINT('',(-0.292054036458,-2.456380208333E-02,- 0.9350001));-#4402 = VERTEX_POINT('',#4403);-#4403 = CARTESIAN_POINT('',(-0.260791015625,-2.456380208333E-02,- 0.9350001));-#4404 = SURFACE_CURVE('',#4405,(#4409),.PCURVE_S1.);-#4405 = LINE('',#4406,#4407);-#4406 = CARTESIAN_POINT('',(-0.292054036458,-2.456380208333E-02,- 0.9350001));-#4407 = VECTOR('',#4408,1.);-#4408 = DIRECTION('',(1.,0.,0.));-#4409 = PCURVE('',#4410,#4415);-#4410 = PLANE('',#4411);-#4411 = AXIS2_PLACEMENT_3D('',#4412,#4413,#4414);-#4412 = CARTESIAN_POINT('',(-0.309052734375,-3.231119791667E-02,- 0.9350001));-#4413 = DIRECTION('',(0.,0.,1.));-#4414 = DIRECTION('',(1.,0.,-0.));-#4415 = DEFINITIONAL_REPRESENTATION('',(#4416),#4420);-#4416 = LINE('',#4417,#4418);-#4417 = CARTESIAN_POINT('',(1.6998697917E-02,7.74739583334E-03));-#4418 = VECTOR('',#4419,1.);-#4419 = DIRECTION('',(1.,0.));-#4420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4421 = ORIENTED_EDGE('',*,*,#4422,.T.);-#4422 = EDGE_CURVE('',#4402,#4423,#4425,.T.);-#4423 = VERTEX_POINT('',#4424);-#4424 = CARTESIAN_POINT('',(-0.260791015625,-3.231119791667E-02,- 0.9350001));-#4425 = SURFACE_CURVE('',#4426,(#4430),.PCURVE_S1.);+#4391 = DIRECTION('',(0.976595648113,0.215083565358,0.));+#4392 = PCURVE('',#4308,#4393);+#4393 = DEFINITIONAL_REPRESENTATION('',(#4394),#4398);+#4394 = LINE('',#4395,#4396);+#4395 = CARTESIAN_POINT('',(1.1210938621E-02,6.4667975217E-02));+#4396 = VECTOR('',#4397,1.);+#4397 = DIRECTION('',(0.976595648113,0.215083565358));+#4398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4399 = ORIENTED_EDGE('',*,*,#4400,.T.);+#4400 = EDGE_CURVE('',#4385,#4401,#4403,.T.);+#4401 = VERTEX_POINT('',#4402);+#4402 = CARTESIAN_POINT('',(-0.217132183172,0.66072894524,0.59710515));+#4403 = SURFACE_CURVE('',#4404,(#4408),.PCURVE_S1.);+#4404 = LINE('',#4405,#4406);+#4405 = CARTESIAN_POINT('',(-0.226337913259,0.66072894524,0.59710515));+#4406 = VECTOR('',#4407,1.);+#4407 = DIRECTION('',(1.,0.,0.));+#4408 = PCURVE('',#4308,#4409);+#4409 = DEFINITIONAL_REPRESENTATION('',(#4410),#4414);+#4410 = LINE('',#4411,#4412);+#4411 = CARTESIAN_POINT('',(2.6523440152E-02,6.8040371388E-02));+#4412 = VECTOR('',#4413,1.);+#4413 = DIRECTION('',(1.,0.));+#4414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4415 = ORIENTED_EDGE('',*,*,#4416,.T.);+#4416 = EDGE_CURVE('',#4401,#4417,#4419,.T.);+#4417 = VERTEX_POINT('',#4418);+#4418 = CARTESIAN_POINT('',(-0.217132183172,0.60043597046,0.59710515));+#4419 = SURFACE_CURVE('',#4420,(#4424),.PCURVE_S1.);+#4420 = LINE('',#4421,#4422);+#4421 = CARTESIAN_POINT('',(-0.217132183172,0.66072894524,0.59710515));+#4422 = VECTOR('',#4423,1.);+#4423 = DIRECTION('',(0.,-1.,0.));+#4424 = PCURVE('',#4308,#4425);+#4425 = DEFINITIONAL_REPRESENTATION('',(#4426),#4430); #4426 = LINE('',#4427,#4428);-#4427 = CARTESIAN_POINT('',(-0.260791015625,-2.456380208333E-02,- 0.9350001));+#4427 = CARTESIAN_POINT('',(3.5729170239E-02,6.8040371388E-02)); #4428 = VECTOR('',#4429,1.);-#4429 = DIRECTION('',(0.,-1.,0.));-#4430 = PCURVE('',#4410,#4431);-#4431 = DEFINITIONAL_REPRESENTATION('',(#4432),#4436);-#4432 = LINE('',#4433,#4434);-#4433 = CARTESIAN_POINT('',(4.826171875E-02,7.74739583334E-03));-#4434 = VECTOR('',#4435,1.);-#4435 = DIRECTION('',(0.,-1.));-#4436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4437 = ORIENTED_EDGE('',*,*,#4438,.T.);-#4438 = EDGE_CURVE('',#4423,#4439,#4441,.T.);-#4439 = VERTEX_POINT('',#4440);-#4440 = CARTESIAN_POINT('',(-0.302125651042,-3.231119791667E-02,- 0.9350001));-#4441 = SURFACE_CURVE('',#4442,(#4446),.PCURVE_S1.);+#4429 = DIRECTION('',(0.,-1.));+#4430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4431 = ORIENTED_EDGE('',*,*,#4432,.T.);+#4432 = EDGE_CURVE('',#4417,#4433,#4435,.T.);+#4433 = VERTEX_POINT('',#4434);+#4434 = CARTESIAN_POINT('',(-0.203004577592,0.60043597046,0.59710515));+#4435 = SURFACE_CURVE('',#4436,(#4440),.PCURVE_S1.);+#4436 = LINE('',#4437,#4438);+#4437 = CARTESIAN_POINT('',(-0.217132183172,0.60043597046,0.59710515));+#4438 = VECTOR('',#4439,1.);+#4439 = DIRECTION('',(1.,0.,0.));+#4440 = PCURVE('',#4308,#4441);+#4441 = DEFINITIONAL_REPRESENTATION('',(#4442),#4446); #4442 = LINE('',#4443,#4444);-#4443 = CARTESIAN_POINT('',(-0.260791015625,-3.231119791667E-02,- 0.9350001));+#4443 = CARTESIAN_POINT('',(3.5729170239E-02,7.747396608E-03)); #4444 = VECTOR('',#4445,1.);-#4445 = DIRECTION('',(-1.,0.,0.));-#4446 = PCURVE('',#4410,#4447);-#4447 = DEFINITIONAL_REPRESENTATION('',(#4448),#4452);-#4448 = LINE('',#4449,#4450);-#4449 = CARTESIAN_POINT('',(4.826171875E-02,0.));-#4450 = VECTOR('',#4451,1.);-#4451 = DIRECTION('',(-1.,0.));-#4452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4453 = ORIENTED_EDGE('',*,*,#4454,.T.);-#4454 = EDGE_CURVE('',#4439,#4455,#4457,.T.);-#4455 = VERTEX_POINT('',#4456);-#4456 = CARTESIAN_POINT('',(-0.302125651042,-2.456380208333E-02,- 0.9350001));-#4457 = SURFACE_CURVE('',#4458,(#4462),.PCURVE_S1.);+#4445 = DIRECTION('',(1.,0.));+#4446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4447 = ORIENTED_EDGE('',*,*,#4448,.T.);+#4448 = EDGE_CURVE('',#4433,#4449,#4451,.T.);+#4449 = VERTEX_POINT('',#4450);+#4450 = CARTESIAN_POINT('',(-0.203004577592,0.592688573852,0.59710515));+#4451 = SURFACE_CURVE('',#4452,(#4456),.PCURVE_S1.);+#4452 = LINE('',#4453,#4454);+#4453 = CARTESIAN_POINT('',(-0.203004577592,0.60043597046,0.59710515));+#4454 = VECTOR('',#4455,1.);+#4455 = DIRECTION('',(0.,-1.,0.));+#4456 = PCURVE('',#4308,#4457);+#4457 = DEFINITIONAL_REPRESENTATION('',(#4458),#4462); #4458 = LINE('',#4459,#4460);-#4459 = CARTESIAN_POINT('',(-0.302125651042,-3.231119791667E-02,- 0.9350001));+#4459 = CARTESIAN_POINT('',(4.9856775819E-02,7.747396608E-03)); #4460 = VECTOR('',#4461,1.);-#4461 = DIRECTION('',(0.,1.,0.));-#4462 = PCURVE('',#4410,#4463);-#4463 = DEFINITIONAL_REPRESENTATION('',(#4464),#4468);-#4464 = LINE('',#4465,#4466);-#4465 = CARTESIAN_POINT('',(6.927083333E-03,0.));-#4466 = VECTOR('',#4467,1.);-#4467 = DIRECTION('',(0.,1.));-#4468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4469 = ORIENTED_EDGE('',*,*,#4470,.T.);-#4470 = EDGE_CURVE('',#4455,#4471,#4473,.T.);-#4471 = VERTEX_POINT('',#4472);-#4472 = CARTESIAN_POINT('',(-0.287223307292,-8.704427083333E-03,- 0.9350001));-#4473 = SURFACE_CURVE('',#4474,(#4478),.PCURVE_S1.);-#4474 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4475,#4476,#4477),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4475 = CARTESIAN_POINT('',(-0.302125651042,-2.456380208333E-02,- 0.9350001));-#4476 = CARTESIAN_POINT('',(-0.293603515625,-1.55859375E-02,0.9350001));-#4477 = CARTESIAN_POINT('',(-0.287223307292,-8.704427083333E-03,- 0.9350001));-#4478 = PCURVE('',#4410,#4479);-#4479 = DEFINITIONAL_REPRESENTATION('',(#4480),#4484);-#4480 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4481,#4482,#4483),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4481 = CARTESIAN_POINT('',(6.927083333E-03,7.74739583334E-03));-#4482 = CARTESIAN_POINT('',(1.544921875E-02,1.672526041667E-02));-#4483 = CARTESIAN_POINT('',(2.1829427083E-02,2.360677083334E-02));-#4484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4485 = ORIENTED_EDGE('',*,*,#4486,.T.);-#4486 = EDGE_CURVE('',#4471,#4487,#4489,.T.);-#4487 = VERTEX_POINT('',#4488);-#4488 = CARTESIAN_POINT('',(-0.278427734375,1.002604166667E-03,0.9350001- ));-#4489 = SURFACE_CURVE('',#4490,(#4494),.PCURVE_S1.);-#4490 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4491,#4492,#4493),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4491 = CARTESIAN_POINT('',(-0.287223307292,-8.704427083333E-03,- 0.9350001));-#4492 = CARTESIAN_POINT('',(-0.280843098958,-1.822916666667E-03,- 0.9350001));-#4493 = CARTESIAN_POINT('',(-0.278427734375,1.002604166667E-03,0.9350001- ));-#4494 = PCURVE('',#4410,#4495);-#4495 = DEFINITIONAL_REPRESENTATION('',(#4496),#4500);-#4496 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4497,#4498,#4499),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4497 = CARTESIAN_POINT('',(2.1829427083E-02,2.360677083334E-02));-#4498 = CARTESIAN_POINT('',(2.8209635417E-02,3.048828125E-02));-#4499 = CARTESIAN_POINT('',(3.0625E-02,3.331380208334E-02));-#4500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4501 = ORIENTED_EDGE('',*,*,#4502,.T.);-#4502 = EDGE_CURVE('',#4487,#4503,#4505,.T.);-#4503 = VERTEX_POINT('',#4504);-#4504 = CARTESIAN_POINT('',(-0.272275390625,1.000325520833E-02,0.9350001- ));-#4505 = SURFACE_CURVE('',#4506,(#4510),.PCURVE_S1.);-#4506 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4507,#4508,#4509),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4507 = CARTESIAN_POINT('',(-0.278427734375,1.002604166667E-03,0.9350001- ));-#4508 = CARTESIAN_POINT('',(-0.273870442708,6.5625E-03,0.9350001));-#4509 = CARTESIAN_POINT('',(-0.272275390625,1.000325520833E-02,0.9350001- ));-#4510 = PCURVE('',#4410,#4511);-#4511 = DEFINITIONAL_REPRESENTATION('',(#4512),#4516);-#4512 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4513,#4514,#4515),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4513 = CARTESIAN_POINT('',(3.0625E-02,3.331380208334E-02));-#4514 = CARTESIAN_POINT('',(3.5182291667E-02,3.887369791667E-02));-#4515 = CARTESIAN_POINT('',(3.677734375E-02,4.2314453125E-02));-#4516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4517 = ORIENTED_EDGE('',*,*,#4518,.T.);-#4518 = EDGE_CURVE('',#4503,#4519,#4521,.T.);-#4519 = VERTEX_POINT('',#4520);-#4520 = CARTESIAN_POINT('',(-0.270680338542,1.704427083333E-02,0.9350001- ));-#4521 = SURFACE_CURVE('',#4522,(#4526),.PCURVE_S1.);-#4522 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4523,#4524,#4525),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4523 = CARTESIAN_POINT('',(-0.272275390625,1.000325520833E-02,0.9350001- ));-#4524 = CARTESIAN_POINT('',(-0.270680338542,1.344401041667E-02,0.9350001- ));-#4525 = CARTESIAN_POINT('',(-0.270680338542,1.704427083333E-02,0.9350001- ));-#4526 = PCURVE('',#4410,#4527);-#4527 = DEFINITIONAL_REPRESENTATION('',(#4528),#4532);-#4528 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4529,#4530,#4531),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4529 = CARTESIAN_POINT('',(3.677734375E-02,4.2314453125E-02));-#4530 = CARTESIAN_POINT('',(3.8372395833E-02,4.575520833334E-02));-#4531 = CARTESIAN_POINT('',(3.8372395833E-02,4.935546875E-02));-#4532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4533 = ORIENTED_EDGE('',*,*,#4534,.T.);-#4534 = EDGE_CURVE('',#4519,#4535,#4537,.T.);-#4535 = VERTEX_POINT('',#4536);-#4536 = CARTESIAN_POINT('',(-0.274029947917,2.59765625E-02,0.9350001));-#4537 = SURFACE_CURVE('',#4538,(#4542),.PCURVE_S1.);-#4538 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4539,#4540,#4541),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4539 = CARTESIAN_POINT('',(-0.270680338542,1.704427083333E-02,0.9350001- ));-#4540 = CARTESIAN_POINT('',(-0.270680338542,2.274088541667E-02,0.9350001- ));-#4541 = CARTESIAN_POINT('',(-0.274029947917,2.59765625E-02,0.9350001));-#4542 = PCURVE('',#4410,#4543);-#4543 = DEFINITIONAL_REPRESENTATION('',(#4544),#4548);-#4544 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4545,#4546,#4547),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4545 = CARTESIAN_POINT('',(3.8372395833E-02,4.935546875E-02));-#4546 = CARTESIAN_POINT('',(3.8372395833E-02,5.505208333334E-02));-#4547 = CARTESIAN_POINT('',(3.5022786458E-02,5.828776041667E-02));-#4548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4549 = ORIENTED_EDGE('',*,*,#4550,.T.);-#4550 = EDGE_CURVE('',#4535,#4551,#4553,.T.);-#4551 = VERTEX_POINT('',#4552);-#4552 = CARTESIAN_POINT('',(-0.283212890625,2.921223958333E-02,0.9350001- ));-#4553 = SURFACE_CURVE('',#4554,(#4558),.PCURVE_S1.);-#4554 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4555,#4556,#4557),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4555 = CARTESIAN_POINT('',(-0.274029947917,2.59765625E-02,0.9350001));-#4556 = CARTESIAN_POINT('',(-0.277379557292,2.921223958333E-02,0.9350001- ));-#4557 = CARTESIAN_POINT('',(-0.283212890625,2.921223958333E-02,0.9350001- ));-#4558 = PCURVE('',#4410,#4559);-#4559 = DEFINITIONAL_REPRESENTATION('',(#4560),#4564);-#4560 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4561,#4562,#4563),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4561 = CARTESIAN_POINT('',(3.5022786458E-02,5.828776041667E-02));-#4562 = CARTESIAN_POINT('',(3.1673177083E-02,6.15234375E-02));-#4563 = CARTESIAN_POINT('',(2.583984375E-02,6.15234375E-02));-#4564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4565 = ORIENTED_EDGE('',*,*,#4566,.T.);-#4566 = EDGE_CURVE('',#4551,#4567,#4569,.T.);-#4567 = VERTEX_POINT('',#4568);-#4568 = CARTESIAN_POINT('',(-0.291917317708,2.770833333333E-02,0.9350001- ));-#4569 = SURFACE_CURVE('',#4570,(#4574),.PCURVE_S1.);-#4570 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4571,#4572,#4573),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4571 = CARTESIAN_POINT('',(-0.283212890625,2.921223958333E-02,0.9350001- ));-#4572 = CARTESIAN_POINT('',(-0.287360026042,2.921223958333E-02,0.9350001- ));-#4573 = CARTESIAN_POINT('',(-0.291917317708,2.770833333333E-02,0.9350001- ));-#4574 = PCURVE('',#4410,#4575);-#4575 = DEFINITIONAL_REPRESENTATION('',(#4576),#4580);-#4576 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4577,#4578,#4579),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4577 = CARTESIAN_POINT('',(2.583984375E-02,6.15234375E-02));-#4578 = CARTESIAN_POINT('',(2.1692708333E-02,6.15234375E-02));-#4579 = CARTESIAN_POINT('',(1.7135416667E-02,6.001953125E-02));-#4580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4581 = ORIENTED_EDGE('',*,*,#4582,.T.);-#4582 = EDGE_CURVE('',#4567,#4583,#4585,.T.);-#4583 = VERTEX_POINT('',#4584);-#4584 = CARTESIAN_POINT('',(-0.301578776042,2.315104166667E-02,0.9350001- ));-#4585 = SURFACE_CURVE('',#4586,(#4590),.PCURVE_S1.);-#4586 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4587,#4588,#4589),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4587 = CARTESIAN_POINT('',(-0.291917317708,2.770833333333E-02,0.9350001- ));-#4588 = CARTESIAN_POINT('',(-0.296474609375,2.620442708333E-02,0.9350001- ));-#4589 = CARTESIAN_POINT('',(-0.301578776042,2.315104166667E-02,0.9350001- ));-#4590 = PCURVE('',#4410,#4591);-#4591 = DEFINITIONAL_REPRESENTATION('',(#4592),#4596);-#4592 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4593,#4594,#4595),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4593 = CARTESIAN_POINT('',(1.7135416667E-02,6.001953125E-02));-#4594 = CARTESIAN_POINT('',(1.2578125E-02,5.8515625E-02));-#4595 = CARTESIAN_POINT('',(7.473958333E-03,5.546223958334E-02));-#4596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4597 = ORIENTED_EDGE('',*,*,#4598,.T.);-#4598 = EDGE_CURVE('',#4583,#4599,#4601,.T.);-#4599 = VERTEX_POINT('',#4600);-#4600 = CARTESIAN_POINT('',(-0.301578776042,3.244791666667E-02,0.9350001- ));-#4601 = SURFACE_CURVE('',#4602,(#4606),.PCURVE_S1.);-#4602 = LINE('',#4603,#4604);-#4603 = CARTESIAN_POINT('',(-0.301578776042,2.315104166667E-02,0.9350001- ));-#4604 = VECTOR('',#4605,1.);-#4605 = DIRECTION('',(0.,1.,0.));-#4606 = PCURVE('',#4410,#4607);-#4607 = DEFINITIONAL_REPRESENTATION('',(#4608),#4612);-#4608 = LINE('',#4609,#4610);-#4609 = CARTESIAN_POINT('',(7.473958333E-03,5.546223958334E-02));-#4610 = VECTOR('',#4611,1.);-#4611 = DIRECTION('',(0.,1.));-#4612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4613 = ORIENTED_EDGE('',*,*,#4614,.T.);-#4614 = EDGE_CURVE('',#4599,#4615,#4617,.T.);-#4615 = VERTEX_POINT('',#4616);-#4616 = CARTESIAN_POINT('',(-0.292350260417,3.58203125E-02,0.9350001));-#4617 = SURFACE_CURVE('',#4618,(#4622),.PCURVE_S1.);-#4618 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4619,#4620,#4621),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4619 = CARTESIAN_POINT('',(-0.301578776042,3.244791666667E-02,0.9350001- ));-#4620 = CARTESIAN_POINT('',(-0.296884765625,3.468098958333E-02,0.9350001- ));-#4621 = CARTESIAN_POINT('',(-0.292350260417,3.58203125E-02,0.9350001));-#4622 = PCURVE('',#4410,#4623);-#4623 = DEFINITIONAL_REPRESENTATION('',(#4624),#4628);-#4624 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4625,#4626,#4627),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4625 = CARTESIAN_POINT('',(7.473958333E-03,6.475911458334E-02));-#4626 = CARTESIAN_POINT('',(1.216796875E-02,6.69921875E-02));-#4627 = CARTESIAN_POINT('',(1.6702473958E-02,6.813151041667E-02));-#4628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4629 = ORIENTED_EDGE('',*,*,#4630,.T.);-#4630 = EDGE_CURVE('',#4615,#4631,#4633,.T.);-#4631 = VERTEX_POINT('',#4632);-#4632 = CARTESIAN_POINT('',(-0.283395182292,3.695963541667E-02,0.9350001- ));-#4633 = SURFACE_CURVE('',#4634,(#4638),.PCURVE_S1.);-#4634 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4635,#4636,#4637),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4635 = CARTESIAN_POINT('',(-0.292350260417,3.58203125E-02,0.9350001));-#4636 = CARTESIAN_POINT('',(-0.287815755208,3.695963541667E-02,0.9350001- ));-#4637 = CARTESIAN_POINT('',(-0.283395182292,3.695963541667E-02,0.9350001- ));-#4638 = PCURVE('',#4410,#4639);-#4639 = DEFINITIONAL_REPRESENTATION('',(#4640),#4644);-#4640 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4641,#4642,#4643),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4641 = CARTESIAN_POINT('',(1.6702473958E-02,6.813151041667E-02));-#4642 = CARTESIAN_POINT('',(2.1236979167E-02,6.927083333334E-02));-#4643 = CARTESIAN_POINT('',(2.5657552083E-02,6.927083333334E-02));-#4644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4645 = ORIENTED_EDGE('',*,*,#4646,.T.);-#4646 = EDGE_CURVE('',#4631,#4647,#4649,.T.);-#4647 = VERTEX_POINT('',#4648);-#4648 = CARTESIAN_POINT('',(-0.267330729167,3.1650390625E-02,0.9350001)- );-#4649 = SURFACE_CURVE('',#4650,(#4654),.PCURVE_S1.);-#4650 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4651,#4652,#4653),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4651 = CARTESIAN_POINT('',(-0.283395182292,3.695963541667E-02,0.9350001- ));-#4652 = CARTESIAN_POINT('',(-0.273414713542,3.695963541667E-02,0.9350001- ));-#4653 = CARTESIAN_POINT('',(-0.267330729167,3.1650390625E-02,0.9350001)- );-#4654 = PCURVE('',#4410,#4655);-#4655 = DEFINITIONAL_REPRESENTATION('',(#4656),#4660);-#4656 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4657,#4658,#4659),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4657 = CARTESIAN_POINT('',(2.5657552083E-02,6.927083333334E-02));-#4658 = CARTESIAN_POINT('',(3.5638020833E-02,6.927083333334E-02));-#4659 = CARTESIAN_POINT('',(4.1722005208E-02,6.396158854167E-02));-#4660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4661 = ORIENTED_EDGE('',*,*,#4662,.T.);-#4662 = EDGE_CURVE('',#4647,#4663,#4665,.T.);-#4663 = VERTEX_POINT('',#4664);-#4664 = CARTESIAN_POINT('',(-0.261246744792,1.772786458333E-02,0.9350001- ));-#4665 = SURFACE_CURVE('',#4666,(#4670),.PCURVE_S1.);-#4666 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4667,#4668,#4669),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4667 = CARTESIAN_POINT('',(-0.267330729167,3.1650390625E-02,0.9350001)- );-#4668 = CARTESIAN_POINT('',(-0.261246744792,2.634114583333E-02,0.9350001- ));-#4669 = CARTESIAN_POINT('',(-0.261246744792,1.772786458333E-02,0.9350001- ));-#4670 = PCURVE('',#4410,#4671);-#4671 = DEFINITIONAL_REPRESENTATION('',(#4672),#4676);-#4672 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4673,#4674,#4675),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4673 = CARTESIAN_POINT('',(4.1722005208E-02,6.396158854167E-02));-#4674 = CARTESIAN_POINT('',(4.7805989583E-02,5.865234375E-02));-#4675 = CARTESIAN_POINT('',(4.7805989583E-02,5.00390625E-02));-#4676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4677 = ORIENTED_EDGE('',*,*,#4678,.T.);-#4678 = EDGE_CURVE('',#4663,#4679,#4681,.T.);-#4679 = VERTEX_POINT('',#4680);-#4680 = CARTESIAN_POINT('',(-0.263274739583,8.977864583333E-03,0.9350001- ));-#4681 = SURFACE_CURVE('',#4682,(#4686),.PCURVE_S1.);-#4682 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4683,#4684,#4685),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4683 = CARTESIAN_POINT('',(-0.261246744792,1.772786458333E-02,0.9350001- ));-#4684 = CARTESIAN_POINT('',(-0.261246744792,1.335286458333E-02,0.9350001- ));-#4685 = CARTESIAN_POINT('',(-0.263274739583,8.977864583333E-03,0.9350001- ));-#4686 = PCURVE('',#4410,#4687);+#4461 = DIRECTION('',(0.,-1.));+#4462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4463 = ORIENTED_EDGE('',*,*,#4464,.T.);+#4464 = EDGE_CURVE('',#4449,#4298,#4465,.T.);+#4465 = SURFACE_CURVE('',#4466,(#4470),.PCURVE_S1.);+#4466 = LINE('',#4467,#4468);+#4467 = CARTESIAN_POINT('',(-0.203004577592,0.592688573852,0.59710515));+#4468 = VECTOR('',#4469,1.);+#4469 = DIRECTION('',(-1.,0.,0.));+#4470 = PCURVE('',#4308,#4471);+#4471 = DEFINITIONAL_REPRESENTATION('',(#4472),#4476);+#4472 = LINE('',#4473,#4474);+#4473 = CARTESIAN_POINT('',(4.9856775819E-02,0.));+#4474 = VECTOR('',#4475,1.);+#4475 = DIRECTION('',(-1.,0.));+#4476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4477 = SHELL_BASED_SURFACE_MODEL('',(#4478));+#4478 = OPEN_SHELL('',(#4479));+#4479 = ADVANCED_FACE('',(#4480,#4615),#4494,.T.);+#4480 = FACE_BOUND('',#4481,.F.);+#4481 = EDGE_LOOP('',(#4482,#4505,#4521,#4537,#4553,#4569,#4585,#4601));+#4482 = ORIENTED_EDGE('',*,*,#4483,.T.);+#4483 = EDGE_CURVE('',#4484,#4486,#4488,.T.);+#4484 = VERTEX_POINT('',#4485);+#4485 = CARTESIAN_POINT('',(-0.194983743457,0.592688573852,0.59710515));+#4486 = VERTEX_POINT('',#4487);+#4487 = CARTESIAN_POINT('',(-0.174156918457,0.66072894524,0.59710515));+#4488 = SURFACE_CURVE('',#4489,(#4493),.PCURVE_S1.);+#4489 = LINE('',#4490,#4491);+#4490 = CARTESIAN_POINT('',(-0.194983743457,0.592688573852,0.59710515));+#4491 = VECTOR('',#4492,1.);+#4492 = DIRECTION('',(0.292690370589,0.956207271968,0.));+#4493 = PCURVE('',#4494,#4499);+#4494 = PLANE('',#4495);+#4495 = AXIS2_PLACEMENT_3D('',#4496,#4497,#4498);+#4496 = CARTESIAN_POINT('',(-0.196669941542,0.592688573852,0.59710515));+#4497 = DIRECTION('',(0.,0.,1.));+#4498 = DIRECTION('',(1.,0.,-0.));+#4499 = DEFINITIONAL_REPRESENTATION('',(#4500),#4504);+#4500 = LINE('',#4501,#4502);+#4501 = CARTESIAN_POINT('',(1.686198085E-03,0.));+#4502 = VECTOR('',#4503,1.);+#4503 = DIRECTION('',(0.292690370589,0.956207271968));+#4504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4505 = ORIENTED_EDGE('',*,*,#4506,.T.);+#4506 = EDGE_CURVE('',#4486,#4507,#4509,.T.);+#4507 = VERTEX_POINT('',#4508);+#4508 = CARTESIAN_POINT('',(-0.162991552757,0.66072894524,0.59710515));+#4509 = SURFACE_CURVE('',#4510,(#4514),.PCURVE_S1.);+#4510 = LINE('',#4511,#4512);+#4511 = CARTESIAN_POINT('',(-0.174156918457,0.66072894524,0.59710515));+#4512 = VECTOR('',#4513,1.);+#4513 = DIRECTION('',(1.,0.,0.));+#4514 = PCURVE('',#4494,#4515);+#4515 = DEFINITIONAL_REPRESENTATION('',(#4516),#4520);+#4516 = LINE('',#4517,#4518);+#4517 = CARTESIAN_POINT('',(2.2513023085E-02,6.8040371388E-02));+#4518 = VECTOR('',#4519,1.);+#4519 = DIRECTION('',(1.,0.));+#4520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4521 = ORIENTED_EDGE('',*,*,#4522,.T.);+#4522 = EDGE_CURVE('',#4507,#4523,#4525,.T.);+#4523 = VERTEX_POINT('',#4524);+#4524 = CARTESIAN_POINT('',(-0.142164727758,0.592688573852,0.59710515));+#4525 = SURFACE_CURVE('',#4526,(#4530),.PCURVE_S1.);+#4526 = LINE('',#4527,#4528);+#4527 = CARTESIAN_POINT('',(-0.162991552757,0.66072894524,0.59710515));+#4528 = VECTOR('',#4529,1.);+#4529 = DIRECTION('',(0.292690370589,-0.956207271968,0.));+#4530 = PCURVE('',#4494,#4531);+#4531 = DEFINITIONAL_REPRESENTATION('',(#4532),#4536);+#4532 = LINE('',#4533,#4534);+#4533 = CARTESIAN_POINT('',(3.3678388785E-02,6.8040371388E-02));+#4534 = VECTOR('',#4535,1.);+#4535 = DIRECTION('',(0.292690370589,-0.956207271968));+#4536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4537 = ORIENTED_EDGE('',*,*,#4538,.T.);+#4538 = EDGE_CURVE('',#4523,#4539,#4541,.T.);+#4539 = VERTEX_POINT('',#4540);+#4540 = CARTESIAN_POINT('',(-0.151689468294,0.592688573852,0.59710515));+#4541 = SURFACE_CURVE('',#4542,(#4546),.PCURVE_S1.);+#4542 = LINE('',#4543,#4544);+#4543 = CARTESIAN_POINT('',(-0.142164727758,0.592688573852,0.59710515));+#4544 = VECTOR('',#4545,1.);+#4545 = DIRECTION('',(-1.,0.,0.));+#4546 = PCURVE('',#4494,#4547);+#4547 = DEFINITIONAL_REPRESENTATION('',(#4548),#4552);+#4548 = LINE('',#4549,#4550);+#4549 = CARTESIAN_POINT('',(5.4505213784E-02,0.));+#4550 = VECTOR('',#4551,1.);+#4551 = DIRECTION('',(-1.,0.));+#4552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4553 = ORIENTED_EDGE('',*,*,#4554,.T.);+#4554 = EDGE_CURVE('',#4539,#4555,#4557,.T.);+#4555 = VERTEX_POINT('',#4556);+#4556 = CARTESIAN_POINT('',(-0.156702489629,0.610416440208,0.59710515));+#4557 = SURFACE_CURVE('',#4558,(#4562),.PCURVE_S1.);+#4558 = LINE('',#4559,#4560);+#4559 = CARTESIAN_POINT('',(-0.151689468294,0.592688573852,0.59710515));+#4560 = VECTOR('',#4561,1.);+#4561 = DIRECTION('',(-0.272106397942,0.962267170904,0.));+#4562 = PCURVE('',#4494,#4563);+#4563 = DEFINITIONAL_REPRESENTATION('',(#4564),#4568);+#4564 = LINE('',#4565,#4566);+#4565 = CARTESIAN_POINT('',(4.4980473248E-02,0.));+#4566 = VECTOR('',#4567,1.);+#4567 = DIRECTION('',(-0.272106397942,0.962267170904));+#4568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4569 = ORIENTED_EDGE('',*,*,#4570,.T.);+#4570 = EDGE_CURVE('',#4555,#4571,#4573,.T.);+#4571 = VERTEX_POINT('',#4572);+#4572 = CARTESIAN_POINT('',(-0.180537127429,0.610416440208,0.59710515));+#4573 = SURFACE_CURVE('',#4574,(#4578),.PCURVE_S1.);+#4574 = LINE('',#4575,#4576);+#4575 = CARTESIAN_POINT('',(-0.156702489629,0.610416440208,0.59710515));+#4576 = VECTOR('',#4577,1.);+#4577 = DIRECTION('',(-1.,0.,0.));+#4578 = PCURVE('',#4494,#4579);+#4579 = DEFINITIONAL_REPRESENTATION('',(#4580),#4584);+#4580 = LINE('',#4581,#4582);+#4581 = CARTESIAN_POINT('',(3.9967451913E-02,1.7727866356E-02));+#4582 = VECTOR('',#4583,1.);+#4583 = DIRECTION('',(-1.,0.));+#4584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4585 = ORIENTED_EDGE('',*,*,#4586,.T.);+#4586 = EDGE_CURVE('',#4571,#4587,#4589,.T.);+#4587 = VERTEX_POINT('',#4588);+#4588 = CARTESIAN_POINT('',(-0.185459002921,0.592688573852,0.59710515));+#4589 = SURFACE_CURVE('',#4590,(#4594),.PCURVE_S1.);+#4590 = LINE('',#4591,#4592);+#4591 = CARTESIAN_POINT('',(-0.180537127429,0.610416440208,0.59710515));+#4592 = VECTOR('',#4593,1.);+#4593 = DIRECTION('',(-0.2675161078,-0.963553388281,0.));+#4594 = PCURVE('',#4494,#4595);+#4595 = DEFINITIONAL_REPRESENTATION('',(#4596),#4600);+#4596 = LINE('',#4597,#4598);+#4597 = CARTESIAN_POINT('',(1.6132814113E-02,1.7727866356E-02));+#4598 = VECTOR('',#4599,1.);+#4599 = DIRECTION('',(-0.2675161078,-0.963553388281));+#4600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4601 = ORIENTED_EDGE('',*,*,#4602,.T.);+#4602 = EDGE_CURVE('',#4587,#4484,#4603,.T.);+#4603 = SURFACE_CURVE('',#4604,(#4608),.PCURVE_S1.);+#4604 = LINE('',#4605,#4606);+#4605 = CARTESIAN_POINT('',(-0.185459002921,0.592688573852,0.59710515));+#4606 = VECTOR('',#4607,1.);+#4607 = DIRECTION('',(-1.,0.,0.));+#4608 = PCURVE('',#4494,#4609);+#4609 = DEFINITIONAL_REPRESENTATION('',(#4610),#4614);+#4610 = LINE('',#4611,#4612);+#4611 = CARTESIAN_POINT('',(1.1210938621E-02,0.));+#4612 = VECTOR('',#4613,1.);+#4613 = DIRECTION('',(-1.,0.));+#4614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4615 = FACE_BOUND('',#4616,.F.);+#4616 = EDGE_LOOP('',(#4617,#4635,#4651));+#4617 = ORIENTED_EDGE('',*,*,#4618,.T.);+#4618 = EDGE_CURVE('',#4619,#4621,#4623,.T.);+#4619 = VERTEX_POINT('',#4620);+#4620 = CARTESIAN_POINT('',(-0.158889989847,0.617799253447,0.59710515));+#4621 = VERTEX_POINT('',#4622);+#4622 = CARTESIAN_POINT('',(-0.168597022068,0.652616965262,0.59710515));+#4623 = SURFACE_CURVE('',#4624,(#4628),.PCURVE_S1.);+#4624 = LINE('',#4625,#4626);+#4625 = CARTESIAN_POINT('',(-0.158889989847,0.617799253447,0.59710515));+#4626 = VECTOR('',#4627,1.);+#4627 = DIRECTION('',(-0.268554134051,0.963264593497,0.));+#4628 = PCURVE('',#4494,#4629);+#4629 = DEFINITIONAL_REPRESENTATION('',(#4630),#4634);+#4630 = LINE('',#4631,#4632);+#4631 = CARTESIAN_POINT('',(3.7779951695E-02,2.5110679595E-02));+#4632 = VECTOR('',#4633,1.);+#4633 = DIRECTION('',(-0.268554134051,0.963264593497));+#4634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4635 = ORIENTED_EDGE('',*,*,#4636,.T.);+#4636 = EDGE_CURVE('',#4621,#4637,#4639,.T.);+#4637 = VERTEX_POINT('',#4638);+#4638 = CARTESIAN_POINT('',(-0.178304054289,0.617799253447,0.59710515));+#4639 = SURFACE_CURVE('',#4640,(#4644),.PCURVE_S1.);+#4640 = LINE('',#4641,#4642);+#4641 = CARTESIAN_POINT('',(-0.168597022068,0.652616965262,0.59710515));+#4642 = VECTOR('',#4643,1.);+#4643 = DIRECTION('',(-0.268554134051,-0.963264593497,0.));+#4644 = PCURVE('',#4494,#4645);+#4645 = DEFINITIONAL_REPRESENTATION('',(#4646),#4650);+#4646 = LINE('',#4647,#4648);+#4647 = CARTESIAN_POINT('',(2.8072919474E-02,5.992839141E-02));+#4648 = VECTOR('',#4649,1.);+#4649 = DIRECTION('',(-0.268554134051,-0.963264593497));+#4650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4651 = ORIENTED_EDGE('',*,*,#4652,.T.);+#4652 = EDGE_CURVE('',#4637,#4619,#4653,.T.);+#4653 = SURFACE_CURVE('',#4654,(#4658),.PCURVE_S1.);+#4654 = LINE('',#4655,#4656);+#4655 = CARTESIAN_POINT('',(-0.178304054289,0.617799253447,0.59710515));+#4656 = VECTOR('',#4657,1.);+#4657 = DIRECTION('',(1.,0.,0.));+#4658 = PCURVE('',#4494,#4659);+#4659 = DEFINITIONAL_REPRESENTATION('',(#4660),#4664);+#4660 = LINE('',#4661,#4662);+#4661 = CARTESIAN_POINT('',(1.8365887253E-02,2.5110679595E-02));+#4662 = VECTOR('',#4663,1.);+#4663 = DIRECTION('',(1.,0.));+#4664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4665 = SHELL_BASED_SURFACE_MODEL('',(#4666));+#4666 = OPEN_SHELL('',(#4667));+#4667 = ADVANCED_FACE('',(#4668),#4682,.T.);+#4668 = FACE_BOUND('',#4669,.F.);+#4669 = EDGE_LOOP('',(#4670,#4693,#4709,#4725,#4741,#4757,#4773,#4789,+ #4805,#4821,#4837,#4853,#4869,#4885,#4901,#4917,#4933,#4949,#4965,+ #4981,#4997));+#4670 = ORIENTED_EDGE('',*,*,#4671,.T.);+#4671 = EDGE_CURVE('',#4672,#4674,#4676,.T.);+#4672 = VERTEX_POINT('',#4673);+#4673 = CARTESIAN_POINT('',(-0.123479830056,0.60043597046,0.59710515));+#4674 = VERTEX_POINT('',#4675);+#4675 = CARTESIAN_POINT('',(-9.221680609668E-02,0.60043597046,0.59710515+ ));+#4676 = SURFACE_CURVE('',#4677,(#4681),.PCURVE_S1.);+#4677 = LINE('',#4678,#4679);+#4678 = CARTESIAN_POINT('',(-0.123479830056,0.60043597046,0.59710515));+#4679 = VECTOR('',#4680,1.);+#4680 = DIRECTION('',(1.,0.,0.));+#4681 = PCURVE('',#4682,#4687);+#4682 = PLANE('',#4683);+#4683 = AXIS2_PLACEMENT_3D('',#4684,#4685,#4686);+#4684 = CARTESIAN_POINT('',(-0.140478529673,0.592688573852,0.59710515));+#4685 = DIRECTION('',(0.,0.,1.));+#4686 = DIRECTION('',(1.,0.,-0.)); #4687 = DEFINITIONAL_REPRESENTATION('',(#4688),#4692);-#4688 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4689,#4690,#4691),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4689 = CARTESIAN_POINT('',(4.7805989583E-02,5.00390625E-02));-#4690 = CARTESIAN_POINT('',(4.7805989583E-02,4.56640625E-02));-#4691 = CARTESIAN_POINT('',(4.5777994792E-02,4.12890625E-02));+#4688 = LINE('',#4689,#4690);+#4689 = CARTESIAN_POINT('',(1.6998699617E-02,7.747396608E-03));+#4690 = VECTOR('',#4691,1.);+#4691 = DIRECTION('',(1.,0.)); #4692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #4693 = ORIENTED_EDGE('',*,*,#4694,.T.);-#4694 = EDGE_CURVE('',#4679,#4695,#4697,.T.);+#4694 = EDGE_CURVE('',#4674,#4695,#4697,.T.); #4695 = VERTEX_POINT('',#4696);-#4696 = CARTESIAN_POINT('',(-0.269860026042,-6.8359375E-04,0.9350001));+#4696 = CARTESIAN_POINT('',(-9.221680609668E-02,0.592688573852,+ 0.59710515)); #4697 = SURFACE_CURVE('',#4698,(#4702),.PCURVE_S1.);-#4698 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4699,#4700,#4701),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4699 = CARTESIAN_POINT('',(-0.263274739583,8.977864583333E-03,0.9350001+#4698 = LINE('',#4699,#4700);+#4699 = CARTESIAN_POINT('',(-9.221680609668E-02,0.60043597046,0.59710515 ));-#4700 = CARTESIAN_POINT('',(-0.265302734375,4.602864583333E-03,0.9350001- ));-#4701 = CARTESIAN_POINT('',(-0.269860026042,-6.8359375E-04,0.9350001));-#4702 = PCURVE('',#4410,#4703);+#4700 = VECTOR('',#4701,1.);+#4701 = DIRECTION('',(0.,-1.,0.));+#4702 = PCURVE('',#4682,#4703); #4703 = DEFINITIONAL_REPRESENTATION('',(#4704),#4708);-#4704 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4705,#4706,#4707),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4705 = CARTESIAN_POINT('',(4.5777994792E-02,4.12890625E-02));-#4706 = CARTESIAN_POINT('',(4.375E-02,3.69140625E-02));-#4707 = CARTESIAN_POINT('',(3.9192708333E-02,3.162760416667E-02));+#4704 = LINE('',#4705,#4706);+#4705 = CARTESIAN_POINT('',(4.826172357632E-02,7.747396608E-03));+#4706 = VECTOR('',#4707,1.);+#4707 = DIRECTION('',(0.,-1.)); #4708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #4709 = ORIENTED_EDGE('',*,*,#4710,.T.); #4710 = EDGE_CURVE('',#4695,#4711,#4713,.T.); #4711 = VERTEX_POINT('',#4712);-#4712 = CARTESIAN_POINT('',(-0.277265625,-8.88671875E-03,0.9350001));+#4712 = CARTESIAN_POINT('',(-0.133551445647,0.592688573852,0.59710515)); #4713 = SURFACE_CURVE('',#4714,(#4718),.PCURVE_S1.);-#4714 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4715,#4716,#4717),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4715 = CARTESIAN_POINT('',(-0.269860026042,-6.8359375E-04,0.9350001));-#4716 = CARTESIAN_POINT('',(-0.272412109375,-3.645833333333E-03,- 0.9350001));-#4717 = CARTESIAN_POINT('',(-0.277265625,-8.88671875E-03,0.9350001));-#4718 = PCURVE('',#4410,#4719);+#4714 = LINE('',#4715,#4716);+#4715 = CARTESIAN_POINT('',(-9.221680609668E-02,0.592688573852,+ 0.59710515));+#4716 = VECTOR('',#4717,1.);+#4717 = DIRECTION('',(-1.,0.,0.));+#4718 = PCURVE('',#4682,#4719); #4719 = DEFINITIONAL_REPRESENTATION('',(#4720),#4724);-#4720 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4721,#4722,#4723),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4721 = CARTESIAN_POINT('',(3.9192708333E-02,3.162760416667E-02));-#4722 = CARTESIAN_POINT('',(3.6640625E-02,2.866536458334E-02));-#4723 = CARTESIAN_POINT('',(3.1787109375E-02,2.342447916667E-02));+#4720 = LINE('',#4721,#4722);+#4721 = CARTESIAN_POINT('',(4.826172357632E-02,0.));+#4722 = VECTOR('',#4723,1.);+#4723 = DIRECTION('',(-1.,0.)); #4724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #4725 = ORIENTED_EDGE('',*,*,#4726,.T.);-#4726 = EDGE_CURVE('',#4711,#4400,#4727,.T.);-#4727 = SURFACE_CURVE('',#4728,(#4732),.PCURVE_S1.);-#4728 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4729,#4730,#4731),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4729 = CARTESIAN_POINT('',(-0.277265625,-8.88671875E-03,0.9350001));-#4730 = CARTESIAN_POINT('',(-0.282119140625,-1.412760416667E-02,- 0.9350001));-#4731 = CARTESIAN_POINT('',(-0.292054036458,-2.456380208333E-02,- 0.9350001));-#4732 = PCURVE('',#4410,#4733);-#4733 = DEFINITIONAL_REPRESENTATION('',(#4734),#4738);-#4734 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4735,#4736,#4737),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#4735 = CARTESIAN_POINT('',(3.1787109375E-02,2.342447916667E-02));-#4736 = CARTESIAN_POINT('',(2.693359375E-02,1.818359375E-02));-#4737 = CARTESIAN_POINT('',(1.6998697917E-02,7.74739583334E-03));-#4738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4739 = SHELL_BASED_SURFACE_MODEL('',(#4740));-#4740 = OPEN_SHELL('',(#4741));-#4741 = ADVANCED_FACE('',(#4742),#4756,.T.);-#4742 = FACE_BOUND('',#4743,.F.);-#4743 = EDGE_LOOP('',(#4744,#4767,#4783,#4799,#4815,#4831,#4847,#4863,- #4879,#4895,#4911));-#4744 = ORIENTED_EDGE('',*,*,#4745,.T.);-#4745 = EDGE_CURVE('',#4746,#4748,#4750,.T.);-#4746 = VERTEX_POINT('',#4747);-#4747 = CARTESIAN_POINT('',(-0.240556640625,-3.231119791667E-02,- 0.9350001));-#4748 = VERTEX_POINT('',#4749);-#4749 = CARTESIAN_POINT('',(-0.240556640625,-2.456380208333E-02,- 0.9350001));-#4750 = SURFACE_CURVE('',#4751,(#4755),.PCURVE_S1.);-#4751 = LINE('',#4752,#4753);-#4752 = CARTESIAN_POINT('',(-0.240556640625,-3.231119791667E-02,- 0.9350001));-#4753 = VECTOR('',#4754,1.);-#4754 = DIRECTION('',(0.,1.,0.));-#4755 = PCURVE('',#4756,#4761);-#4756 = PLANE('',#4757);-#4757 = AXIS2_PLACEMENT_3D('',#4758,#4759,#4760);-#4758 = CARTESIAN_POINT('',(-0.252861328125,-3.231119791667E-02,- 0.9350001));-#4759 = DIRECTION('',(0.,0.,1.));-#4760 = DIRECTION('',(1.,0.,-0.));-#4761 = DEFINITIONAL_REPRESENTATION('',(#4762),#4766);-#4762 = LINE('',#4763,#4764);-#4763 = CARTESIAN_POINT('',(1.23046875E-02,0.));-#4764 = VECTOR('',#4765,1.);-#4765 = DIRECTION('',(0.,1.));-#4766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4767 = ORIENTED_EDGE('',*,*,#4768,.T.);-#4768 = EDGE_CURVE('',#4748,#4769,#4771,.T.);-#4769 = VERTEX_POINT('',#4770);-#4770 = CARTESIAN_POINT('',(-0.226246744792,-2.456380208333E-02,- 0.9350001));-#4771 = SURFACE_CURVE('',#4772,(#4776),.PCURVE_S1.);-#4772 = LINE('',#4773,#4774);-#4773 = CARTESIAN_POINT('',(-0.240556640625,-2.456380208333E-02,- 0.9350001));-#4774 = VECTOR('',#4775,1.);-#4775 = DIRECTION('',(1.,0.,0.));-#4776 = PCURVE('',#4756,#4777);-#4777 = DEFINITIONAL_REPRESENTATION('',(#4778),#4782);-#4778 = LINE('',#4779,#4780);-#4779 = CARTESIAN_POINT('',(1.23046875E-02,7.74739583334E-03));-#4780 = VECTOR('',#4781,1.);-#4781 = DIRECTION('',(1.,0.));-#4782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4783 = ORIENTED_EDGE('',*,*,#4784,.T.);-#4784 = EDGE_CURVE('',#4769,#4785,#4787,.T.);-#4785 = VERTEX_POINT('',#4786);-#4786 = CARTESIAN_POINT('',(-0.226246744792,2.743489583333E-02,0.9350001- ));-#4787 = SURFACE_CURVE('',#4788,(#4792),.PCURVE_S1.);-#4788 = LINE('',#4789,#4790);-#4789 = CARTESIAN_POINT('',(-0.226246744792,-2.456380208333E-02,- 0.9350001));-#4790 = VECTOR('',#4791,1.);-#4791 = DIRECTION('',(0.,1.,0.));-#4792 = PCURVE('',#4756,#4793);-#4793 = DEFINITIONAL_REPRESENTATION('',(#4794),#4798);-#4794 = LINE('',#4795,#4796);-#4795 = CARTESIAN_POINT('',(2.6614583333E-02,7.74739583334E-03));-#4796 = VECTOR('',#4797,1.);-#4797 = DIRECTION('',(0.,1.));-#4798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4799 = ORIENTED_EDGE('',*,*,#4800,.T.);-#4800 = EDGE_CURVE('',#4785,#4801,#4803,.T.);-#4801 = VERTEX_POINT('',#4802);-#4802 = CARTESIAN_POINT('',(-0.241650390625,2.397135416667E-02,0.9350001- ));-#4803 = SURFACE_CURVE('',#4804,(#4808),.PCURVE_S1.);-#4804 = LINE('',#4805,#4806);-#4805 = CARTESIAN_POINT('',(-0.226246744792,2.743489583333E-02,0.9350001- ));-#4806 = VECTOR('',#4807,1.);-#4807 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));-#4808 = PCURVE('',#4756,#4809);-#4809 = DEFINITIONAL_REPRESENTATION('',(#4810),#4814);-#4810 = LINE('',#4811,#4812);-#4811 = CARTESIAN_POINT('',(2.6614583333E-02,5.974609375E-02));-#4812 = VECTOR('',#4813,1.);-#4813 = DIRECTION('',(-0.97564065493,-0.219374821819));-#4814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4815 = ORIENTED_EDGE('',*,*,#4816,.T.);-#4816 = EDGE_CURVE('',#4801,#4817,#4819,.T.);-#4817 = VERTEX_POINT('',#4818);-#4818 = CARTESIAN_POINT('',(-0.241650390625,3.235677083333E-02,0.9350001- ));-#4819 = SURFACE_CURVE('',#4820,(#4824),.PCURVE_S1.);-#4820 = LINE('',#4821,#4822);-#4821 = CARTESIAN_POINT('',(-0.241650390625,2.397135416667E-02,0.9350001- ));-#4822 = VECTOR('',#4823,1.);-#4823 = DIRECTION('',(0.,1.,0.));-#4824 = PCURVE('',#4756,#4825);-#4825 = DEFINITIONAL_REPRESENTATION('',(#4826),#4830);-#4826 = LINE('',#4827,#4828);-#4827 = CARTESIAN_POINT('',(1.12109375E-02,5.628255208334E-02));-#4828 = VECTOR('',#4829,1.);-#4829 = DIRECTION('',(0.,1.));-#4830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4831 = ORIENTED_EDGE('',*,*,#4832,.T.);-#4832 = EDGE_CURVE('',#4817,#4833,#4835,.T.);-#4833 = VERTEX_POINT('',#4834);-#4834 = CARTESIAN_POINT('',(-0.226337890625,3.572916666667E-02,0.9350001- ));-#4835 = SURFACE_CURVE('',#4836,(#4840),.PCURVE_S1.);-#4836 = LINE('',#4837,#4838);-#4837 = CARTESIAN_POINT('',(-0.241650390625,3.235677083333E-02,0.9350001- ));-#4838 = VECTOR('',#4839,1.);-#4839 = DIRECTION('',(0.976595648113,0.215083565358,0.));-#4840 = PCURVE('',#4756,#4841);-#4841 = DEFINITIONAL_REPRESENTATION('',(#4842),#4846);-#4842 = LINE('',#4843,#4844);-#4843 = CARTESIAN_POINT('',(1.12109375E-02,6.466796875E-02));-#4844 = VECTOR('',#4845,1.);-#4845 = DIRECTION('',(0.976595648113,0.215083565358));-#4846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4847 = ORIENTED_EDGE('',*,*,#4848,.T.);-#4848 = EDGE_CURVE('',#4833,#4849,#4851,.T.);-#4849 = VERTEX_POINT('',#4850);-#4850 = CARTESIAN_POINT('',(-0.217132161458,3.572916666667E-02,0.9350001- ));-#4851 = SURFACE_CURVE('',#4852,(#4856),.PCURVE_S1.);-#4852 = LINE('',#4853,#4854);-#4853 = CARTESIAN_POINT('',(-0.226337890625,3.572916666667E-02,0.9350001- ));-#4854 = VECTOR('',#4855,1.);-#4855 = DIRECTION('',(1.,0.,0.));-#4856 = PCURVE('',#4756,#4857);-#4857 = DEFINITIONAL_REPRESENTATION('',(#4858),#4862);-#4858 = LINE('',#4859,#4860);-#4859 = CARTESIAN_POINT('',(2.65234375E-02,6.804036458334E-02));-#4860 = VECTOR('',#4861,1.);-#4861 = DIRECTION('',(1.,0.));-#4862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4863 = ORIENTED_EDGE('',*,*,#4864,.T.);-#4864 = EDGE_CURVE('',#4849,#4865,#4867,.T.);-#4865 = VERTEX_POINT('',#4866);-#4866 = CARTESIAN_POINT('',(-0.217132161458,-2.456380208333E-02,- 0.9350001));-#4867 = SURFACE_CURVE('',#4868,(#4872),.PCURVE_S1.);-#4868 = LINE('',#4869,#4870);-#4869 = CARTESIAN_POINT('',(-0.217132161458,3.572916666667E-02,0.9350001- ));-#4870 = VECTOR('',#4871,1.);-#4871 = DIRECTION('',(0.,-1.,0.));-#4872 = PCURVE('',#4756,#4873);-#4873 = DEFINITIONAL_REPRESENTATION('',(#4874),#4878);+#4726 = EDGE_CURVE('',#4711,#4727,#4729,.T.);+#4727 = VERTEX_POINT('',#4728);+#4728 = CARTESIAN_POINT('',(-0.133551445647,0.60043597046,0.59710515));+#4729 = SURFACE_CURVE('',#4730,(#4734),.PCURVE_S1.);+#4730 = LINE('',#4731,#4732);+#4731 = CARTESIAN_POINT('',(-0.133551445647,0.592688573852,0.59710515));+#4732 = VECTOR('',#4733,1.);+#4733 = DIRECTION('',(0.,1.,0.));+#4734 = PCURVE('',#4682,#4735);+#4735 = DEFINITIONAL_REPRESENTATION('',(#4736),#4740);+#4736 = LINE('',#4737,#4738);+#4737 = CARTESIAN_POINT('',(6.927084026E-03,0.));+#4738 = VECTOR('',#4739,1.);+#4739 = DIRECTION('',(0.,1.));+#4740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4741 = ORIENTED_EDGE('',*,*,#4742,.T.);+#4742 = EDGE_CURVE('',#4727,#4743,#4745,.T.);+#4743 = VERTEX_POINT('',#4744);+#4744 = CARTESIAN_POINT('',(-0.118649100407,0.616295347046,0.59710515));+#4745 = SURFACE_CURVE('',#4746,(#4750),.PCURVE_S1.);+#4746 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4747,#4748,#4749),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4747 = CARTESIAN_POINT('',(-0.133551445647,0.60043597046,0.59710515));+#4748 = CARTESIAN_POINT('',(-0.125029309378,0.609413835941,0.59710515));+#4749 = CARTESIAN_POINT('',(-0.118649100407,0.616295347046,0.59710515));+#4750 = PCURVE('',#4682,#4751);+#4751 = DEFINITIONAL_REPRESENTATION('',(#4752),#4756);+#4752 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4753,#4754,#4755),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4753 = CARTESIAN_POINT('',(6.927084026E-03,7.747396608E-03));+#4754 = CARTESIAN_POINT('',(1.5449220295E-02,1.6725262089E-02));+#4755 = CARTESIAN_POINT('',(2.1829429266E-02,2.3606773194E-02));+#4756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4757 = ORIENTED_EDGE('',*,*,#4758,.T.);+#4758 = EDGE_CURVE('',#4743,#4759,#4761,.T.);+#4759 = VERTEX_POINT('',#4760);+#4760 = CARTESIAN_POINT('',(-0.10985352661,0.626002379267,0.59710515));+#4761 = SURFACE_CURVE('',#4762,(#4766),.PCURVE_S1.);+#4762 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4763,#4764,#4765),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4763 = CARTESIAN_POINT('',(-0.118649100407,0.616295347046,0.59710515));+#4764 = CARTESIAN_POINT('',(-0.112268891435,0.623176858151,0.59710515));+#4765 = CARTESIAN_POINT('',(-0.10985352661,0.626002379267,0.59710515));+#4766 = PCURVE('',#4682,#4767);+#4767 = DEFINITIONAL_REPRESENTATION('',(#4768),#4772);+#4768 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4769,#4770,#4771),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4769 = CARTESIAN_POINT('',(2.1829429266E-02,2.3606773194E-02));+#4770 = CARTESIAN_POINT('',(2.8209638238E-02,3.0488284299E-02));+#4771 = CARTESIAN_POINT('',(3.0625003063E-02,3.3313805415E-02));+#4772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4773 = ORIENTED_EDGE('',*,*,#4774,.T.);+#4774 = EDGE_CURVE('',#4759,#4775,#4777,.T.);+#4775 = VERTEX_POINT('',#4776);+#4776 = CARTESIAN_POINT('',(-0.103701182245,0.635003031209,0.59710515));+#4777 = SURFACE_CURVE('',#4778,(#4782),.PCURVE_S1.);+#4778 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4779,#4780,#4781),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4779 = CARTESIAN_POINT('',(-0.10985352661,0.626002379267,0.59710515));+#4780 = CARTESIAN_POINT('',(-0.105296234488,0.631562275656,0.59710515));+#4781 = CARTESIAN_POINT('',(-0.103701182245,0.635003031209,0.59710515));+#4782 = PCURVE('',#4682,#4783);+#4783 = DEFINITIONAL_REPRESENTATION('',(#4784),#4788);+#4784 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4785,#4786,#4787),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4785 = CARTESIAN_POINT('',(3.0625003063E-02,3.3313805415E-02));+#4786 = CARTESIAN_POINT('',(3.5182295185E-02,3.8873701804E-02));+#4787 = CARTESIAN_POINT('',(3.6777347428E-02,4.2314457357E-02));+#4788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4789 = ORIENTED_EDGE('',*,*,#4790,.T.);+#4790 = EDGE_CURVE('',#4775,#4791,#4793,.T.);+#4791 = VERTEX_POINT('',#4792);+#4792 = CARTESIAN_POINT('',(-0.102106130002,0.642044047538,0.59710515));+#4793 = SURFACE_CURVE('',#4794,(#4798),.PCURVE_S1.);+#4794 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4795,#4796,#4797),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4795 = CARTESIAN_POINT('',(-0.103701182245,0.635003031209,0.59710515));+#4796 = CARTESIAN_POINT('',(-0.102106130002,0.638443786761,0.59710515));+#4797 = CARTESIAN_POINT('',(-0.102106130002,0.642044047538,0.59710515));+#4798 = PCURVE('',#4682,#4799);+#4799 = DEFINITIONAL_REPRESENTATION('',(#4800),#4804);+#4800 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4801,#4802,#4803),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4801 = CARTESIAN_POINT('',(3.6777347428E-02,4.2314457357E-02));+#4802 = CARTESIAN_POINT('',(3.8372399671E-02,4.5755212909E-02));+#4803 = CARTESIAN_POINT('',(3.8372399671E-02,4.9355473686E-02));+#4804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4805 = ORIENTED_EDGE('',*,*,#4806,.T.);+#4806 = EDGE_CURVE('',#4791,#4807,#4809,.T.);+#4807 = VERTEX_POINT('',#4808);+#4808 = CARTESIAN_POINT('',(-0.105455739712,0.650976340098,0.59710515));+#4809 = SURFACE_CURVE('',#4810,(#4814),.PCURVE_S1.);+#4810 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4811,#4812,#4813),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4811 = CARTESIAN_POINT('',(-0.102106130002,0.642044047538,0.59710515));+#4812 = CARTESIAN_POINT('',(-0.102106130002,0.647740662691,0.59710515));+#4813 = CARTESIAN_POINT('',(-0.105455739712,0.650976340098,0.59710515));+#4814 = PCURVE('',#4682,#4815);+#4815 = DEFINITIONAL_REPRESENTATION('',(#4816),#4820);+#4816 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4817,#4818,#4819),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4817 = CARTESIAN_POINT('',(3.8372399671E-02,4.9355473686E-02));+#4818 = CARTESIAN_POINT('',(3.8372399671E-02,5.5052088839E-02));+#4819 = CARTESIAN_POINT('',(3.5022789961E-02,5.8287766246E-02));+#4820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4821 = ORIENTED_EDGE('',*,*,#4822,.T.);+#4822 = EDGE_CURVE('',#4807,#4823,#4825,.T.);+#4823 = VERTEX_POINT('',#4824);+#4824 = CARTESIAN_POINT('',(-0.114638683339,0.654212017505,0.59710515));+#4825 = SURFACE_CURVE('',#4826,(#4830),.PCURVE_S1.);+#4826 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4827,#4828,#4829),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4827 = CARTESIAN_POINT('',(-0.105455739712,0.650976340098,0.59710515));+#4828 = CARTESIAN_POINT('',(-0.108805349422,0.654212017505,0.59710515));+#4829 = CARTESIAN_POINT('',(-0.114638683339,0.654212017505,0.59710515));+#4830 = PCURVE('',#4682,#4831);+#4831 = DEFINITIONAL_REPRESENTATION('',(#4832),#4836);+#4832 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4833,#4834,#4835),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4833 = CARTESIAN_POINT('',(3.5022789961E-02,5.8287766246E-02));+#4834 = CARTESIAN_POINT('',(3.1673180251E-02,6.1523443653E-02));+#4835 = CARTESIAN_POINT('',(2.5839846334E-02,6.1523443653E-02));+#4836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4837 = ORIENTED_EDGE('',*,*,#4838,.T.);+#4838 = EDGE_CURVE('',#4823,#4839,#4841,.T.);+#4839 = VERTEX_POINT('',#4840);+#4840 = CARTESIAN_POINT('',(-0.123343111293,0.652708111104,0.59710515));+#4841 = SURFACE_CURVE('',#4842,(#4846),.PCURVE_S1.);+#4842 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4843,#4844,#4845),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4843 = CARTESIAN_POINT('',(-0.114638683339,0.654212017505,0.59710515));+#4844 = CARTESIAN_POINT('',(-0.11878581917,0.654212017505,0.59710515));+#4845 = CARTESIAN_POINT('',(-0.123343111293,0.652708111104,0.59710515));+#4846 = PCURVE('',#4682,#4847);+#4847 = DEFINITIONAL_REPRESENTATION('',(#4848),#4852);+#4848 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4849,#4850,#4851),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4849 = CARTESIAN_POINT('',(2.5839846334E-02,6.1523443653E-02));+#4850 = CARTESIAN_POINT('',(2.1692710503E-02,6.1523443653E-02));+#4851 = CARTESIAN_POINT('',(1.713541838E-02,6.0019537252E-02));+#4852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4853 = ORIENTED_EDGE('',*,*,#4854,.T.);+#4854 = EDGE_CURVE('',#4839,#4855,#4857,.T.);+#4855 = VERTEX_POINT('',#4856);+#4856 = CARTESIAN_POINT('',(-0.133004570592,0.648150818982,0.59710515));+#4857 = SURFACE_CURVE('',#4858,(#4862),.PCURVE_S1.);+#4858 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4859,#4860,#4861),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4859 = CARTESIAN_POINT('',(-0.123343111293,0.652708111104,0.59710515));+#4860 = CARTESIAN_POINT('',(-0.127900403415,0.651204204704,0.59710515));+#4861 = CARTESIAN_POINT('',(-0.133004570592,0.648150818982,0.59710515));+#4862 = PCURVE('',#4682,#4863);+#4863 = DEFINITIONAL_REPRESENTATION('',(#4864),#4868);+#4864 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4865,#4866,#4867),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4865 = CARTESIAN_POINT('',(1.713541838E-02,6.0019537252E-02));+#4866 = CARTESIAN_POINT('',(1.2578126258E-02,5.8515630852E-02));+#4867 = CARTESIAN_POINT('',(7.473959081E-03,5.546224513E-02));+#4868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4869 = ORIENTED_EDGE('',*,*,#4870,.T.);+#4870 = EDGE_CURVE('',#4855,#4871,#4873,.T.);+#4871 = VERTEX_POINT('',#4872);+#4872 = CARTESIAN_POINT('',(-0.133004570592,0.657447694911,0.59710515));+#4873 = SURFACE_CURVE('',#4874,(#4878),.PCURVE_S1.); #4874 = LINE('',#4875,#4876);-#4875 = CARTESIAN_POINT('',(3.5729166667E-02,6.804036458334E-02));+#4875 = CARTESIAN_POINT('',(-0.133004570592,0.648150818982,0.59710515)); #4876 = VECTOR('',#4877,1.);-#4877 = DIRECTION('',(0.,-1.));-#4878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4879 = ORIENTED_EDGE('',*,*,#4880,.T.);-#4880 = EDGE_CURVE('',#4865,#4881,#4883,.T.);-#4881 = VERTEX_POINT('',#4882);-#4882 = CARTESIAN_POINT('',(-0.203004557292,-2.456380208333E-02,- 0.9350001));-#4883 = SURFACE_CURVE('',#4884,(#4888),.PCURVE_S1.);-#4884 = LINE('',#4885,#4886);-#4885 = CARTESIAN_POINT('',(-0.217132161458,-2.456380208333E-02,- 0.9350001));-#4886 = VECTOR('',#4887,1.);-#4887 = DIRECTION('',(1.,0.,0.));-#4888 = PCURVE('',#4756,#4889);-#4889 = DEFINITIONAL_REPRESENTATION('',(#4890),#4894);-#4890 = LINE('',#4891,#4892);-#4891 = CARTESIAN_POINT('',(3.5729166667E-02,7.74739583334E-03));-#4892 = VECTOR('',#4893,1.);-#4893 = DIRECTION('',(1.,0.));-#4894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4895 = ORIENTED_EDGE('',*,*,#4896,.T.);-#4896 = EDGE_CURVE('',#4881,#4897,#4899,.T.);-#4897 = VERTEX_POINT('',#4898);-#4898 = CARTESIAN_POINT('',(-0.203004557292,-3.231119791667E-02,- 0.9350001));-#4899 = SURFACE_CURVE('',#4900,(#4904),.PCURVE_S1.);-#4900 = LINE('',#4901,#4902);-#4901 = CARTESIAN_POINT('',(-0.203004557292,-2.456380208333E-02,- 0.9350001));-#4902 = VECTOR('',#4903,1.);-#4903 = DIRECTION('',(0.,-1.,0.));-#4904 = PCURVE('',#4756,#4905);-#4905 = DEFINITIONAL_REPRESENTATION('',(#4906),#4910);-#4906 = LINE('',#4907,#4908);-#4907 = CARTESIAN_POINT('',(4.9856770833E-02,7.74739583334E-03));-#4908 = VECTOR('',#4909,1.);-#4909 = DIRECTION('',(0.,-1.));-#4910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4911 = ORIENTED_EDGE('',*,*,#4912,.T.);-#4912 = EDGE_CURVE('',#4897,#4746,#4913,.T.);-#4913 = SURFACE_CURVE('',#4914,(#4918),.PCURVE_S1.);-#4914 = LINE('',#4915,#4916);-#4915 = CARTESIAN_POINT('',(-0.203004557292,-3.231119791667E-02,- 0.9350001));-#4916 = VECTOR('',#4917,1.);-#4917 = DIRECTION('',(-1.,0.,0.));-#4918 = PCURVE('',#4756,#4919);-#4919 = DEFINITIONAL_REPRESENTATION('',(#4920),#4924);-#4920 = LINE('',#4921,#4922);-#4921 = CARTESIAN_POINT('',(4.9856770833E-02,0.));-#4922 = VECTOR('',#4923,1.);-#4923 = DIRECTION('',(-1.,0.));-#4924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4925 = SHELL_BASED_SURFACE_MODEL('',(#4926));-#4926 = OPEN_SHELL('',(#4927));-#4927 = ADVANCED_FACE('',(#4928,#5063),#4942,.T.);-#4928 = FACE_BOUND('',#4929,.F.);-#4929 = EDGE_LOOP('',(#4930,#4953,#4969,#4985,#5001,#5017,#5033,#5049));-#4930 = ORIENTED_EDGE('',*,*,#4931,.T.);-#4931 = EDGE_CURVE('',#4932,#4934,#4936,.T.);-#4932 = VERTEX_POINT('',#4933);-#4933 = CARTESIAN_POINT('',(-0.194983723958,-3.231119791667E-02,- 0.9350001));-#4934 = VERTEX_POINT('',#4935);-#4935 = CARTESIAN_POINT('',(-0.174156901042,3.572916666667E-02,0.9350001- ));-#4936 = SURFACE_CURVE('',#4937,(#4941),.PCURVE_S1.);-#4937 = LINE('',#4938,#4939);-#4938 = CARTESIAN_POINT('',(-0.194983723958,-3.231119791667E-02,- 0.9350001));-#4939 = VECTOR('',#4940,1.);-#4940 = DIRECTION('',(0.292690370589,0.956207271968,0.));-#4941 = PCURVE('',#4942,#4947);-#4942 = PLANE('',#4943);-#4943 = AXIS2_PLACEMENT_3D('',#4944,#4945,#4946);-#4944 = CARTESIAN_POINT('',(-0.196669921875,-3.231119791667E-02,- 0.9350001));-#4945 = DIRECTION('',(0.,0.,1.));-#4946 = DIRECTION('',(1.,0.,-0.));-#4947 = DEFINITIONAL_REPRESENTATION('',(#4948),#4952);-#4948 = LINE('',#4949,#4950);-#4949 = CARTESIAN_POINT('',(1.686197917E-03,0.));-#4950 = VECTOR('',#4951,1.);-#4951 = DIRECTION('',(0.292690370589,0.956207271968));-#4952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4953 = ORIENTED_EDGE('',*,*,#4954,.T.);-#4954 = EDGE_CURVE('',#4934,#4955,#4957,.T.);-#4955 = VERTEX_POINT('',#4956);-#4956 = CARTESIAN_POINT('',(-0.162991536458,3.572916666667E-02,0.9350001- ));-#4957 = SURFACE_CURVE('',#4958,(#4962),.PCURVE_S1.);-#4958 = LINE('',#4959,#4960);-#4959 = CARTESIAN_POINT('',(-0.174156901042,3.572916666667E-02,0.9350001- ));-#4960 = VECTOR('',#4961,1.);-#4961 = DIRECTION('',(1.,0.,0.));-#4962 = PCURVE('',#4942,#4963);-#4963 = DEFINITIONAL_REPRESENTATION('',(#4964),#4968);-#4964 = LINE('',#4965,#4966);-#4965 = CARTESIAN_POINT('',(2.2513020833E-02,6.804036458334E-02));-#4966 = VECTOR('',#4967,1.);-#4967 = DIRECTION('',(1.,0.));-#4968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4969 = ORIENTED_EDGE('',*,*,#4970,.T.);-#4970 = EDGE_CURVE('',#4955,#4971,#4973,.T.);-#4971 = VERTEX_POINT('',#4972);-#4972 = CARTESIAN_POINT('',(-0.142164713542,-3.231119791667E-02,- 0.9350001));-#4973 = SURFACE_CURVE('',#4974,(#4978),.PCURVE_S1.);-#4974 = LINE('',#4975,#4976);-#4975 = CARTESIAN_POINT('',(-0.162991536458,3.572916666667E-02,0.9350001- ));-#4976 = VECTOR('',#4977,1.);-#4977 = DIRECTION('',(0.292690370589,-0.956207271968,0.));-#4978 = PCURVE('',#4942,#4979);-#4979 = DEFINITIONAL_REPRESENTATION('',(#4980),#4984);-#4980 = LINE('',#4981,#4982);-#4981 = CARTESIAN_POINT('',(3.3678385417E-02,6.804036458334E-02));-#4982 = VECTOR('',#4983,1.);-#4983 = DIRECTION('',(0.292690370589,-0.956207271968));-#4984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4985 = ORIENTED_EDGE('',*,*,#4986,.T.);-#4986 = EDGE_CURVE('',#4971,#4987,#4989,.T.);-#4987 = VERTEX_POINT('',#4988);-#4988 = CARTESIAN_POINT('',(-0.151689453125,-3.231119791667E-02,- 0.9350001));-#4989 = SURFACE_CURVE('',#4990,(#4994),.PCURVE_S1.);-#4990 = LINE('',#4991,#4992);-#4991 = CARTESIAN_POINT('',(-0.142164713542,-3.231119791667E-02,- 0.9350001));-#4992 = VECTOR('',#4993,1.);-#4993 = DIRECTION('',(-1.,0.,0.));-#4994 = PCURVE('',#4942,#4995);-#4995 = DEFINITIONAL_REPRESENTATION('',(#4996),#5000);-#4996 = LINE('',#4997,#4998);-#4997 = CARTESIAN_POINT('',(5.4505208333E-02,0.));-#4998 = VECTOR('',#4999,1.);-#4999 = DIRECTION('',(-1.,0.));-#5000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5001 = ORIENTED_EDGE('',*,*,#5002,.T.);-#5002 = EDGE_CURVE('',#4987,#5003,#5005,.T.);-#5003 = VERTEX_POINT('',#5004);-#5004 = CARTESIAN_POINT('',(-0.156702473958,-1.458333333333E-02,- 0.9350001));-#5005 = SURFACE_CURVE('',#5006,(#5010),.PCURVE_S1.);-#5006 = LINE('',#5007,#5008);-#5007 = CARTESIAN_POINT('',(-0.151689453125,-3.231119791667E-02,- 0.9350001));-#5008 = VECTOR('',#5009,1.);-#5009 = DIRECTION('',(-0.272106397942,0.962267170904,0.));-#5010 = PCURVE('',#4942,#5011);-#5011 = DEFINITIONAL_REPRESENTATION('',(#5012),#5016);-#5012 = LINE('',#5013,#5014);-#5013 = CARTESIAN_POINT('',(4.498046875E-02,0.));-#5014 = VECTOR('',#5015,1.);-#5015 = DIRECTION('',(-0.272106397942,0.962267170904));-#5016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5017 = ORIENTED_EDGE('',*,*,#5018,.T.);-#5018 = EDGE_CURVE('',#5003,#5019,#5021,.T.);-#5019 = VERTEX_POINT('',#5020);-#5020 = CARTESIAN_POINT('',(-0.180537109375,-1.458333333333E-02,- 0.9350001));-#5021 = SURFACE_CURVE('',#5022,(#5026),.PCURVE_S1.);-#5022 = LINE('',#5023,#5024);-#5023 = CARTESIAN_POINT('',(-0.156702473958,-1.458333333333E-02,- 0.9350001));-#5024 = VECTOR('',#5025,1.);-#5025 = DIRECTION('',(-1.,0.,0.));-#5026 = PCURVE('',#4942,#5027);-#5027 = DEFINITIONAL_REPRESENTATION('',(#5028),#5032);-#5028 = LINE('',#5029,#5030);-#5029 = CARTESIAN_POINT('',(3.9967447917E-02,1.772786458334E-02));-#5030 = VECTOR('',#5031,1.);-#5031 = DIRECTION('',(-1.,0.));-#5032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5033 = ORIENTED_EDGE('',*,*,#5034,.T.);-#5034 = EDGE_CURVE('',#5019,#5035,#5037,.T.);-#5035 = VERTEX_POINT('',#5036);-#5036 = CARTESIAN_POINT('',(-0.185458984375,-3.231119791667E-02,- 0.9350001));-#5037 = SURFACE_CURVE('',#5038,(#5042),.PCURVE_S1.);-#5038 = LINE('',#5039,#5040);-#5039 = CARTESIAN_POINT('',(-0.180537109375,-1.458333333333E-02,- 0.9350001));-#5040 = VECTOR('',#5041,1.);-#5041 = DIRECTION('',(-0.2675161078,-0.963553388281,0.));-#5042 = PCURVE('',#4942,#5043);-#5043 = DEFINITIONAL_REPRESENTATION('',(#5044),#5048);+#4877 = DIRECTION('',(0.,1.,0.));+#4878 = PCURVE('',#4682,#4879);+#4879 = DEFINITIONAL_REPRESENTATION('',(#4880),#4884);+#4880 = LINE('',#4881,#4882);+#4881 = CARTESIAN_POINT('',(7.473959081E-03,5.546224513E-02));+#4882 = VECTOR('',#4883,1.);+#4883 = DIRECTION('',(0.,1.));+#4884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4885 = ORIENTED_EDGE('',*,*,#4886,.T.);+#4886 = EDGE_CURVE('',#4871,#4887,#4889,.T.);+#4887 = VERTEX_POINT('',#4888);+#4888 = CARTESIAN_POINT('',(-0.123776054044,0.660820091082,0.59710515));+#4889 = SURFACE_CURVE('',#4890,(#4894),.PCURVE_S1.);+#4890 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4891,#4892,#4893),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4891 = CARTESIAN_POINT('',(-0.133004570592,0.657447694911,0.59710515));+#4892 = CARTESIAN_POINT('',(-0.128310559706,0.659680768051,0.59710515));+#4893 = CARTESIAN_POINT('',(-0.123776054044,0.660820091082,0.59710515));+#4894 = PCURVE('',#4682,#4895);+#4895 = DEFINITIONAL_REPRESENTATION('',(#4896),#4900);+#4896 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4897,#4898,#4899),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4897 = CARTESIAN_POINT('',(7.473959081E-03,6.4759121059E-02));+#4898 = CARTESIAN_POINT('',(1.2167969967E-02,6.6992194199E-02));+#4899 = CARTESIAN_POINT('',(1.6702475629E-02,6.813151723E-02));+#4900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4901 = ORIENTED_EDGE('',*,*,#4902,.T.);+#4902 = EDGE_CURVE('',#4887,#4903,#4905,.T.);+#4903 = VERTEX_POINT('',#4904);+#4904 = CARTESIAN_POINT('',(-0.114820975024,0.661959414113,0.59710515));+#4905 = SURFACE_CURVE('',#4906,(#4910),.PCURVE_S1.);+#4906 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4907,#4908,#4909),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4907 = CARTESIAN_POINT('',(-0.123776054044,0.660820091082,0.59710515));+#4908 = CARTESIAN_POINT('',(-0.119241548382,0.661959414113,0.59710515));+#4909 = CARTESIAN_POINT('',(-0.114820975024,0.661959414113,0.59710515));+#4910 = PCURVE('',#4682,#4911);+#4911 = DEFINITIONAL_REPRESENTATION('',(#4912),#4916);+#4912 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4913,#4914,#4915),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4913 = CARTESIAN_POINT('',(1.6702475629E-02,6.813151723E-02));+#4914 = CARTESIAN_POINT('',(2.1236981291E-02,6.9270840261E-02));+#4915 = CARTESIAN_POINT('',(2.5657554649E-02,6.9270840261E-02));+#4916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4917 = ORIENTED_EDGE('',*,*,#4918,.T.);+#4918 = EDGE_CURVE('',#4903,#4919,#4921,.T.);+#4919 = VERTEX_POINT('',#4920);+#4920 = CARTESIAN_POINT('',(-9.875652029232E-02,0.65665016879,0.59710515+ ));+#4921 = SURFACE_CURVE('',#4922,(#4926),.PCURVE_S1.);+#4922 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4923,#4924,#4925),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4923 = CARTESIAN_POINT('',(-0.114820975024,0.661959414113,0.59710515));+#4924 = CARTESIAN_POINT('',(-0.104840505276,0.661959414113,0.59710515));+#4925 = CARTESIAN_POINT('',(-9.875652029232E-02,0.65665016879,0.59710515+ ));+#4926 = PCURVE('',#4682,#4927);+#4927 = DEFINITIONAL_REPRESENTATION('',(#4928),#4932);+#4928 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4929,#4930,#4931),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4929 = CARTESIAN_POINT('',(2.5657554649E-02,6.9270840261E-02));+#4930 = CARTESIAN_POINT('',(3.5638024397E-02,6.9270840261E-02));+#4931 = CARTESIAN_POINT('',(4.172200938068E-02,6.3961594938E-02));+#4932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4933 = ORIENTED_EDGE('',*,*,#4934,.T.);+#4934 = EDGE_CURVE('',#4919,#4935,#4937,.T.);+#4935 = VERTEX_POINT('',#4936);+#4936 = CARTESIAN_POINT('',(-9.267253530892E-02,0.642727641356,+ 0.59710515));+#4937 = SURFACE_CURVE('',#4938,(#4942),.PCURVE_S1.);+#4938 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4939,#4940,#4941),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4939 = CARTESIAN_POINT('',(-9.875652029232E-02,0.65665016879,0.59710515+ ));+#4940 = CARTESIAN_POINT('',(-9.267253530892E-02,0.651340923467,+ 0.59710515));+#4941 = CARTESIAN_POINT('',(-9.267253530892E-02,0.642727641356,+ 0.59710515));+#4942 = PCURVE('',#4682,#4943);+#4943 = DEFINITIONAL_REPRESENTATION('',(#4944),#4948);+#4944 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4945,#4946,#4947),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4945 = CARTESIAN_POINT('',(4.172200938068E-02,6.3961594938E-02));+#4946 = CARTESIAN_POINT('',(4.780599436408E-02,5.8652349615E-02));+#4947 = CARTESIAN_POINT('',(4.780599436408E-02,5.0039067504E-02));+#4948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4949 = ORIENTED_EDGE('',*,*,#4950,.T.);+#4950 = EDGE_CURVE('',#4935,#4951,#4953,.T.);+#4951 = VERTEX_POINT('',#4952);+#4952 = CARTESIAN_POINT('',(-9.470053030339E-02,0.633977640481,+ 0.59710515));+#4953 = SURFACE_CURVE('',#4954,(#4958),.PCURVE_S1.);+#4954 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4955,#4956,#4957),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4955 = CARTESIAN_POINT('',(-9.267253530892E-02,0.642727641356,+ 0.59710515));+#4956 = CARTESIAN_POINT('',(-9.267253530892E-02,0.638352640919,+ 0.59710515));+#4957 = CARTESIAN_POINT('',(-9.470053030339E-02,0.633977640481,+ 0.59710515));+#4958 = PCURVE('',#4682,#4959);+#4959 = DEFINITIONAL_REPRESENTATION('',(#4960),#4964);+#4960 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4961,#4962,#4963),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4961 = CARTESIAN_POINT('',(4.780599436408E-02,5.0039067504E-02));+#4962 = CARTESIAN_POINT('',(4.780599436408E-02,4.5664067067E-02));+#4963 = CARTESIAN_POINT('',(4.577799936961E-02,4.1289066629E-02));+#4964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4965 = ORIENTED_EDGE('',*,*,#4966,.T.);+#4966 = EDGE_CURVE('',#4951,#4967,#4969,.T.);+#4967 = VERTEX_POINT('',#4968);+#4968 = CARTESIAN_POINT('',(-0.10128581742,0.624316181182,0.59710515));+#4969 = SURFACE_CURVE('',#4970,(#4974),.PCURVE_S1.);+#4970 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4971,#4972,#4973),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4971 = CARTESIAN_POINT('',(-9.470053030339E-02,0.633977640481,+ 0.59710515));+#4972 = CARTESIAN_POINT('',(-9.672852529785E-02,0.629602640044,+ 0.59710515));+#4973 = CARTESIAN_POINT('',(-0.10128581742,0.624316181182,0.59710515));+#4974 = PCURVE('',#4682,#4975);+#4975 = DEFINITIONAL_REPRESENTATION('',(#4976),#4980);+#4976 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4977,#4978,#4979),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4977 = CARTESIAN_POINT('',(4.577799936961E-02,4.1289066629E-02));+#4978 = CARTESIAN_POINT('',(4.375000437515E-02,3.6914066192E-02));+#4979 = CARTESIAN_POINT('',(3.9192712253E-02,3.162760733E-02));+#4980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4981 = ORIENTED_EDGE('',*,*,#4982,.T.);+#4982 = EDGE_CURVE('',#4967,#4983,#4985,.T.);+#4983 = VERTEX_POINT('',#4984);+#4984 = CARTESIAN_POINT('',(-0.108691417119,0.616113055361,0.59710515));+#4985 = SURFACE_CURVE('',#4986,(#4990),.PCURVE_S1.);+#4986 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4987,#4988,#4989),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4987 = CARTESIAN_POINT('',(-0.10128581742,0.624316181182,0.59710515));+#4988 = CARTESIAN_POINT('',(-0.103837901009,0.621353941302,0.59710515));+#4989 = CARTESIAN_POINT('',(-0.108691417119,0.616113055361,0.59710515));+#4990 = PCURVE('',#4682,#4991);+#4991 = DEFINITIONAL_REPRESENTATION('',(#4992),#4996);+#4992 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4993,#4994,#4995),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4993 = CARTESIAN_POINT('',(3.9192712253E-02,3.162760733E-02));+#4994 = CARTESIAN_POINT('',(3.6640628664E-02,2.866536745E-02));+#4995 = CARTESIAN_POINT('',(3.1787112554E-02,2.3424481509E-02));+#4996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4997 = ORIENTED_EDGE('',*,*,#4998,.T.);+#4998 = EDGE_CURVE('',#4983,#4672,#4999,.T.);+#4999 = SURFACE_CURVE('',#5000,(#5004),.PCURVE_S1.);+#5000 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5001,#5002,#5003),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5001 = CARTESIAN_POINT('',(-0.108691417119,0.616113055361,0.59710515));+#5002 = CARTESIAN_POINT('',(-0.113544933229,0.610872169421,0.59710515));+#5003 = CARTESIAN_POINT('',(-0.123479830056,0.60043597046,0.59710515));+#5004 = PCURVE('',#4682,#5005);+#5005 = DEFINITIONAL_REPRESENTATION('',(#5006),#5010);+#5006 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5007,#5008,#5009),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5007 = CARTESIAN_POINT('',(3.1787112554E-02,2.3424481509E-02));+#5008 = CARTESIAN_POINT('',(2.6933596444E-02,1.8183595569E-02));+#5009 = CARTESIAN_POINT('',(1.6998699617E-02,7.747396608E-03));+#5010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5011 = SHELL_BASED_SURFACE_MODEL('',(#5012));+#5012 = OPEN_SHELL('',(#5013));+#5013 = ADVANCED_FACE('',(#5014),#5028,.T.);+#5014 = FACE_BOUND('',#5015,.F.);+#5015 = EDGE_LOOP('',(#5016,#5039,#5055,#5071,#5087,#5103,#5119,#5135,+ #5151,#5167,#5183,#5199,#5215,#5231,#5247,#5263,#5279,#5295,#5311,+ #5327,#5343));+#5016 = ORIENTED_EDGE('',*,*,#5017,.T.);+#5017 = EDGE_CURVE('',#5018,#5020,#5022,.T.);+#5018 = VERTEX_POINT('',#5019);+#5019 = CARTESIAN_POINT('',(-6.728841818717E-02,0.60043597046,0.59710515+ ));+#5020 = VERTEX_POINT('',#5021);+#5021 = CARTESIAN_POINT('',(-3.602539422754E-02,0.60043597046,0.59710515+ ));+#5022 = SURFACE_CURVE('',#5023,(#5027),.PCURVE_S1.);+#5023 = LINE('',#5024,#5025);+#5024 = CARTESIAN_POINT('',(-6.728841818717E-02,0.60043597046,0.59710515+ ));+#5025 = VECTOR('',#5026,1.);+#5026 = DIRECTION('',(1.,0.,0.));+#5027 = PCURVE('',#5028,#5033);+#5028 = PLANE('',#5029);+#5029 = AXIS2_PLACEMENT_3D('',#5030,#5031,#5032);+#5030 = CARTESIAN_POINT('',(-8.428711780371E-02,0.592688573852,+ 0.59710515));+#5031 = DIRECTION('',(0.,0.,1.));+#5032 = DIRECTION('',(1.,0.,-0.));+#5033 = DEFINITIONAL_REPRESENTATION('',(#5034),#5038);+#5034 = LINE('',#5035,#5036);+#5035 = CARTESIAN_POINT('',(1.699869961654E-02,7.747396608E-03));+#5036 = VECTOR('',#5037,1.);+#5037 = DIRECTION('',(1.,0.));+#5038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5039 = ORIENTED_EDGE('',*,*,#5040,.T.);+#5040 = EDGE_CURVE('',#5020,#5041,#5043,.T.);+#5041 = VERTEX_POINT('',#5042);+#5042 = CARTESIAN_POINT('',(-3.602539422754E-02,0.592688573852,+ 0.59710515));+#5043 = SURFACE_CURVE('',#5044,(#5048),.PCURVE_S1.); #5044 = LINE('',#5045,#5046);-#5045 = CARTESIAN_POINT('',(1.61328125E-02,1.772786458334E-02));+#5045 = CARTESIAN_POINT('',(-3.602539422754E-02,0.60043597046,0.59710515+ )); #5046 = VECTOR('',#5047,1.);-#5047 = DIRECTION('',(-0.2675161078,-0.963553388281));-#5048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5049 = ORIENTED_EDGE('',*,*,#5050,.T.);-#5050 = EDGE_CURVE('',#5035,#4932,#5051,.T.);-#5051 = SURFACE_CURVE('',#5052,(#5056),.PCURVE_S1.);-#5052 = LINE('',#5053,#5054);-#5053 = CARTESIAN_POINT('',(-0.185458984375,-3.231119791667E-02,- 0.9350001));-#5054 = VECTOR('',#5055,1.);-#5055 = DIRECTION('',(-1.,0.,0.));-#5056 = PCURVE('',#4942,#5057);-#5057 = DEFINITIONAL_REPRESENTATION('',(#5058),#5062);-#5058 = LINE('',#5059,#5060);-#5059 = CARTESIAN_POINT('',(1.12109375E-02,0.));-#5060 = VECTOR('',#5061,1.);-#5061 = DIRECTION('',(-1.,0.));-#5062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5063 = FACE_BOUND('',#5064,.F.);-#5064 = EDGE_LOOP('',(#5065,#5083,#5099));-#5065 = ORIENTED_EDGE('',*,*,#5066,.T.);-#5066 = EDGE_CURVE('',#5067,#5069,#5071,.T.);-#5067 = VERTEX_POINT('',#5068);-#5068 = CARTESIAN_POINT('',(-0.158889973958,-7.200520833333E-03,- 0.9350001));-#5069 = VERTEX_POINT('',#5070);-#5070 = CARTESIAN_POINT('',(-0.168597005208,2.76171875E-02,0.9350001));-#5071 = SURFACE_CURVE('',#5072,(#5076),.PCURVE_S1.);-#5072 = LINE('',#5073,#5074);-#5073 = CARTESIAN_POINT('',(-0.158889973958,-7.200520833333E-03,- 0.9350001));-#5074 = VECTOR('',#5075,1.);-#5075 = DIRECTION('',(-0.268554134051,0.963264593497,0.));-#5076 = PCURVE('',#4942,#5077);-#5077 = DEFINITIONAL_REPRESENTATION('',(#5078),#5082);-#5078 = LINE('',#5079,#5080);-#5079 = CARTESIAN_POINT('',(3.7779947917E-02,2.511067708334E-02));-#5080 = VECTOR('',#5081,1.);-#5081 = DIRECTION('',(-0.268554134051,0.963264593497));-#5082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5083 = ORIENTED_EDGE('',*,*,#5084,.T.);-#5084 = EDGE_CURVE('',#5069,#5085,#5087,.T.);-#5085 = VERTEX_POINT('',#5086);-#5086 = CARTESIAN_POINT('',(-0.178304036458,-7.200520833333E-03,- 0.9350001));-#5087 = SURFACE_CURVE('',#5088,(#5092),.PCURVE_S1.);-#5088 = LINE('',#5089,#5090);-#5089 = CARTESIAN_POINT('',(-0.168597005208,2.76171875E-02,0.9350001));-#5090 = VECTOR('',#5091,1.);-#5091 = DIRECTION('',(-0.268554134051,-0.963264593497,0.));-#5092 = PCURVE('',#4942,#5093);-#5093 = DEFINITIONAL_REPRESENTATION('',(#5094),#5098);-#5094 = LINE('',#5095,#5096);-#5095 = CARTESIAN_POINT('',(2.8072916667E-02,5.992838541667E-02));-#5096 = VECTOR('',#5097,1.);-#5097 = DIRECTION('',(-0.268554134051,-0.963264593497));-#5098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5099 = ORIENTED_EDGE('',*,*,#5100,.T.);-#5100 = EDGE_CURVE('',#5085,#5067,#5101,.T.);-#5101 = SURFACE_CURVE('',#5102,(#5106),.PCURVE_S1.);-#5102 = LINE('',#5103,#5104);-#5103 = CARTESIAN_POINT('',(-0.178304036458,-7.200520833333E-03,- 0.9350001));-#5104 = VECTOR('',#5105,1.);-#5105 = DIRECTION('',(1.,0.,0.));-#5106 = PCURVE('',#4942,#5107);-#5107 = DEFINITIONAL_REPRESENTATION('',(#5108),#5112);-#5108 = LINE('',#5109,#5110);-#5109 = CARTESIAN_POINT('',(1.8365885417E-02,2.511067708334E-02));-#5110 = VECTOR('',#5111,1.);-#5111 = DIRECTION('',(1.,0.));-#5112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5113 = SHELL_BASED_SURFACE_MODEL('',(#5114));-#5114 = OPEN_SHELL('',(#5115));-#5115 = ADVANCED_FACE('',(#5116),#5130,.T.);-#5116 = FACE_BOUND('',#5117,.F.);-#5117 = EDGE_LOOP('',(#5118,#5141,#5157,#5173,#5189,#5205,#5221,#5237,- #5253,#5269,#5285,#5301,#5317,#5333,#5349,#5365,#5381,#5397,#5413,- #5429,#5445));-#5118 = ORIENTED_EDGE('',*,*,#5119,.T.);-#5119 = EDGE_CURVE('',#5120,#5122,#5124,.T.);-#5120 = VERTEX_POINT('',#5121);-#5121 = CARTESIAN_POINT('',(-0.123479817708,-2.456380208333E-02,- 0.9350001));-#5122 = VERTEX_POINT('',#5123);-#5123 = CARTESIAN_POINT('',(-9.2216796875E-02,-2.456380208333E-02,- 0.9350001));-#5124 = SURFACE_CURVE('',#5125,(#5129),.PCURVE_S1.);-#5125 = LINE('',#5126,#5127);-#5126 = CARTESIAN_POINT('',(-0.123479817708,-2.456380208333E-02,- 0.9350001));-#5127 = VECTOR('',#5128,1.);-#5128 = DIRECTION('',(1.,0.,0.));-#5129 = PCURVE('',#5130,#5135);-#5130 = PLANE('',#5131);-#5131 = AXIS2_PLACEMENT_3D('',#5132,#5133,#5134);-#5132 = CARTESIAN_POINT('',(-0.140478515625,-3.231119791667E-02,- 0.9350001));-#5133 = DIRECTION('',(0.,0.,1.));-#5134 = DIRECTION('',(1.,0.,-0.));-#5135 = DEFINITIONAL_REPRESENTATION('',(#5136),#5140);-#5136 = LINE('',#5137,#5138);-#5137 = CARTESIAN_POINT('',(1.6998697917E-02,7.74739583334E-03));-#5138 = VECTOR('',#5139,1.);-#5139 = DIRECTION('',(1.,0.));-#5140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5141 = ORIENTED_EDGE('',*,*,#5142,.T.);-#5142 = EDGE_CURVE('',#5122,#5143,#5145,.T.);-#5143 = VERTEX_POINT('',#5144);-#5144 = CARTESIAN_POINT('',(-9.2216796875E-02,-3.231119791667E-02,- 0.9350001));-#5145 = SURFACE_CURVE('',#5146,(#5150),.PCURVE_S1.);-#5146 = LINE('',#5147,#5148);-#5147 = CARTESIAN_POINT('',(-9.2216796875E-02,-2.456380208333E-02,- 0.9350001));-#5148 = VECTOR('',#5149,1.);-#5149 = DIRECTION('',(0.,-1.,0.));-#5150 = PCURVE('',#5130,#5151);-#5151 = DEFINITIONAL_REPRESENTATION('',(#5152),#5156);-#5152 = LINE('',#5153,#5154);-#5153 = CARTESIAN_POINT('',(4.826171875E-02,7.74739583334E-03));-#5154 = VECTOR('',#5155,1.);-#5155 = DIRECTION('',(0.,-1.));-#5156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5157 = ORIENTED_EDGE('',*,*,#5158,.T.);-#5158 = EDGE_CURVE('',#5143,#5159,#5161,.T.);-#5159 = VERTEX_POINT('',#5160);-#5160 = CARTESIAN_POINT('',(-0.133551432292,-3.231119791667E-02,- 0.9350001));-#5161 = SURFACE_CURVE('',#5162,(#5166),.PCURVE_S1.);-#5162 = LINE('',#5163,#5164);-#5163 = CARTESIAN_POINT('',(-9.2216796875E-02,-3.231119791667E-02,- 0.9350001));-#5164 = VECTOR('',#5165,1.);-#5165 = DIRECTION('',(-1.,0.,0.));-#5166 = PCURVE('',#5130,#5167);-#5167 = DEFINITIONAL_REPRESENTATION('',(#5168),#5172);-#5168 = LINE('',#5169,#5170);-#5169 = CARTESIAN_POINT('',(4.826171875E-02,0.));-#5170 = VECTOR('',#5171,1.);-#5171 = DIRECTION('',(-1.,0.));-#5172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5173 = ORIENTED_EDGE('',*,*,#5174,.T.);-#5174 = EDGE_CURVE('',#5159,#5175,#5177,.T.);-#5175 = VERTEX_POINT('',#5176);-#5176 = CARTESIAN_POINT('',(-0.133551432292,-2.456380208333E-02,- 0.9350001));-#5177 = SURFACE_CURVE('',#5178,(#5182),.PCURVE_S1.);-#5178 = LINE('',#5179,#5180);-#5179 = CARTESIAN_POINT('',(-0.133551432292,-3.231119791667E-02,- 0.9350001));-#5180 = VECTOR('',#5181,1.);-#5181 = DIRECTION('',(0.,1.,0.));-#5182 = PCURVE('',#5130,#5183);-#5183 = DEFINITIONAL_REPRESENTATION('',(#5184),#5188);-#5184 = LINE('',#5185,#5186);-#5185 = CARTESIAN_POINT('',(6.927083333E-03,0.));-#5186 = VECTOR('',#5187,1.);-#5187 = DIRECTION('',(0.,1.));-#5188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5189 = ORIENTED_EDGE('',*,*,#5190,.T.);-#5190 = EDGE_CURVE('',#5175,#5191,#5193,.T.);-#5191 = VERTEX_POINT('',#5192);-#5192 = CARTESIAN_POINT('',(-0.118649088542,-8.704427083333E-03,- 0.9350001));-#5193 = SURFACE_CURVE('',#5194,(#5198),.PCURVE_S1.);+#5047 = DIRECTION('',(0.,-1.,0.));+#5048 = PCURVE('',#5028,#5049);+#5049 = DEFINITIONAL_REPRESENTATION('',(#5050),#5054);+#5050 = LINE('',#5051,#5052);+#5051 = CARTESIAN_POINT('',(4.826172357617E-02,7.747396608E-03));+#5052 = VECTOR('',#5053,1.);+#5053 = DIRECTION('',(0.,-1.));+#5054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5055 = ORIENTED_EDGE('',*,*,#5056,.T.);+#5056 = EDGE_CURVE('',#5041,#5057,#5059,.T.);+#5057 = VERTEX_POINT('',#5058);+#5058 = CARTESIAN_POINT('',(-7.736003377767E-02,0.592688573852,+ 0.59710515));+#5059 = SURFACE_CURVE('',#5060,(#5064),.PCURVE_S1.);+#5060 = LINE('',#5061,#5062);+#5061 = CARTESIAN_POINT('',(-3.602539422754E-02,0.592688573852,+ 0.59710515));+#5062 = VECTOR('',#5063,1.);+#5063 = DIRECTION('',(-1.,0.,0.));+#5064 = PCURVE('',#5028,#5065);+#5065 = DEFINITIONAL_REPRESENTATION('',(#5066),#5070);+#5066 = LINE('',#5067,#5068);+#5067 = CARTESIAN_POINT('',(4.826172357617E-02,0.));+#5068 = VECTOR('',#5069,1.);+#5069 = DIRECTION('',(-1.,0.));+#5070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5071 = ORIENTED_EDGE('',*,*,#5072,.T.);+#5072 = EDGE_CURVE('',#5057,#5073,#5075,.T.);+#5073 = VERTEX_POINT('',#5074);+#5074 = CARTESIAN_POINT('',(-7.736003377767E-02,0.60043597046,0.59710515+ ));+#5075 = SURFACE_CURVE('',#5076,(#5080),.PCURVE_S1.);+#5076 = LINE('',#5077,#5078);+#5077 = CARTESIAN_POINT('',(-7.736003377767E-02,0.592688573852,+ 0.59710515));+#5078 = VECTOR('',#5079,1.);+#5079 = DIRECTION('',(0.,1.,0.));+#5080 = PCURVE('',#5028,#5081);+#5081 = DEFINITIONAL_REPRESENTATION('',(#5082),#5086);+#5082 = LINE('',#5083,#5084);+#5083 = CARTESIAN_POINT('',(6.92708402604E-03,0.));+#5084 = VECTOR('',#5085,1.);+#5085 = DIRECTION('',(0.,1.));+#5086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5087 = ORIENTED_EDGE('',*,*,#5088,.T.);+#5088 = EDGE_CURVE('',#5073,#5089,#5091,.T.);+#5089 = VERTEX_POINT('',#5090);+#5090 = CARTESIAN_POINT('',(-6.245768853743E-02,0.616295347046,+ 0.59710515));+#5091 = SURFACE_CURVE('',#5092,(#5096),.PCURVE_S1.);+#5092 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5093,#5094,#5095),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5093 = CARTESIAN_POINT('',(-7.736003377767E-02,0.60043597046,0.59710515+ ));+#5094 = CARTESIAN_POINT('',(-6.883789750879E-02,0.609413835941,+ 0.59710515));+#5095 = CARTESIAN_POINT('',(-6.245768853743E-02,0.616295347046,+ 0.59710515));+#5096 = PCURVE('',#5028,#5097);+#5097 = DEFINITIONAL_REPRESENTATION('',(#5098),#5102);+#5098 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5099,#5100,#5101),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5099 = CARTESIAN_POINT('',(6.92708402604E-03,7.747396608E-03));+#5100 = CARTESIAN_POINT('',(1.544922029492E-02,1.6725262089E-02));+#5101 = CARTESIAN_POINT('',(2.182942926628E-02,2.3606773194E-02));+#5102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5103 = ORIENTED_EDGE('',*,*,#5104,.T.);+#5104 = EDGE_CURVE('',#5089,#5105,#5107,.T.);+#5105 = VERTEX_POINT('',#5106);+#5106 = CARTESIAN_POINT('',(-5.366211474121E-02,0.626002379267,+ 0.59710515));+#5107 = SURFACE_CURVE('',#5108,(#5112),.PCURVE_S1.);+#5108 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5109,#5110,#5111),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5109 = CARTESIAN_POINT('',(-6.245768853743E-02,0.616295347046,+ 0.59710515));+#5110 = CARTESIAN_POINT('',(-5.607747956608E-02,0.623176858151,+ 0.59710515));+#5111 = CARTESIAN_POINT('',(-5.366211474121E-02,0.626002379267,+ 0.59710515));+#5112 = PCURVE('',#5028,#5113);+#5113 = DEFINITIONAL_REPRESENTATION('',(#5114),#5118);+#5114 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5115,#5116,#5117),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5115 = CARTESIAN_POINT('',(2.182942926628E-02,2.3606773194E-02));+#5116 = CARTESIAN_POINT('',(2.820963823763E-02,3.0488284299E-02));+#5117 = CARTESIAN_POINT('',(3.06250030625E-02,3.3313805415E-02));+#5118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5119 = ORIENTED_EDGE('',*,*,#5120,.T.);+#5120 = EDGE_CURVE('',#5105,#5121,#5123,.T.);+#5121 = VERTEX_POINT('',#5122);+#5122 = CARTESIAN_POINT('',(-4.750977037598E-02,0.635003031209,+ 0.59710515));+#5123 = SURFACE_CURVE('',#5124,(#5128),.PCURVE_S1.);+#5124 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5125,#5126,#5127),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5125 = CARTESIAN_POINT('',(-5.366211474121E-02,0.626002379267,+ 0.59710515));+#5126 = CARTESIAN_POINT('',(-4.910482261882E-02,0.631562275656,+ 0.59710515));+#5127 = CARTESIAN_POINT('',(-4.750977037598E-02,0.635003031209,+ 0.59710515));+#5128 = PCURVE('',#5028,#5129);+#5129 = DEFINITIONAL_REPRESENTATION('',(#5130),#5134);+#5130 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5131,#5132,#5133),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5131 = CARTESIAN_POINT('',(3.06250030625E-02,3.3313805415E-02));+#5132 = CARTESIAN_POINT('',(3.518229518489E-02,3.8873701804E-02));+#5133 = CARTESIAN_POINT('',(3.677734742773E-02,4.2314457357E-02));+#5134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5135 = ORIENTED_EDGE('',*,*,#5136,.T.);+#5136 = EDGE_CURVE('',#5121,#5137,#5139,.T.);+#5137 = VERTEX_POINT('',#5138);+#5138 = CARTESIAN_POINT('',(-4.591471813314E-02,0.642044047538,+ 0.59710515));+#5139 = SURFACE_CURVE('',#5140,(#5144),.PCURVE_S1.);+#5140 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5141,#5142,#5143),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5141 = CARTESIAN_POINT('',(-4.750977037598E-02,0.635003031209,+ 0.59710515));+#5142 = CARTESIAN_POINT('',(-4.591471813314E-02,0.638443786761,+ 0.59710515));+#5143 = CARTESIAN_POINT('',(-4.591471813314E-02,0.642044047538,+ 0.59710515));+#5144 = PCURVE('',#5028,#5145);+#5145 = DEFINITIONAL_REPRESENTATION('',(#5146),#5150);+#5146 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5147,#5148,#5149),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5147 = CARTESIAN_POINT('',(3.677734742773E-02,4.2314457357E-02));+#5148 = CARTESIAN_POINT('',(3.837239967057E-02,4.5755212909E-02));+#5149 = CARTESIAN_POINT('',(3.837239967057E-02,4.9355473686E-02));+#5150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5151 = ORIENTED_EDGE('',*,*,#5152,.T.);+#5152 = EDGE_CURVE('',#5137,#5153,#5155,.T.);+#5153 = VERTEX_POINT('',#5154);+#5154 = CARTESIAN_POINT('',(-4.92643278431E-02,0.650976340098,0.59710515+ ));+#5155 = SURFACE_CURVE('',#5156,(#5160),.PCURVE_S1.);+#5156 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5157,#5158,#5159),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5157 = CARTESIAN_POINT('',(-4.591471813314E-02,0.642044047538,+ 0.59710515));+#5158 = CARTESIAN_POINT('',(-4.591471813314E-02,0.647740662691,+ 0.59710515));+#5159 = CARTESIAN_POINT('',(-4.92643278431E-02,0.650976340098,0.59710515+ ));+#5160 = PCURVE('',#5028,#5161);+#5161 = DEFINITIONAL_REPRESENTATION('',(#5162),#5166);+#5162 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5163,#5164,#5165),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5163 = CARTESIAN_POINT('',(3.837239967057E-02,4.9355473686E-02));+#5164 = CARTESIAN_POINT('',(3.837239967057E-02,5.5052088839E-02));+#5165 = CARTESIAN_POINT('',(3.502278996061E-02,5.8287766246E-02));+#5166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5167 = ORIENTED_EDGE('',*,*,#5168,.T.);+#5168 = EDGE_CURVE('',#5153,#5169,#5171,.T.);+#5169 = VERTEX_POINT('',#5170);+#5170 = CARTESIAN_POINT('',(-5.844727146973E-02,0.654212017505,+ 0.59710515));+#5171 = SURFACE_CURVE('',#5172,(#5176),.PCURVE_S1.);+#5172 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5173,#5174,#5175),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5173 = CARTESIAN_POINT('',(-4.92643278431E-02,0.650976340098,0.59710515+ ));+#5174 = CARTESIAN_POINT('',(-5.261393755306E-02,0.654212017505,+ 0.59710515));+#5175 = CARTESIAN_POINT('',(-5.844727146973E-02,0.654212017505,+ 0.59710515));+#5176 = PCURVE('',#5028,#5177);+#5177 = DEFINITIONAL_REPRESENTATION('',(#5178),#5182);+#5178 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5179,#5180,#5181),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5179 = CARTESIAN_POINT('',(3.502278996061E-02,5.8287766246E-02));+#5180 = CARTESIAN_POINT('',(3.167318025065E-02,6.1523443653E-02));+#5181 = CARTESIAN_POINT('',(2.583984633398E-02,6.1523443653E-02));+#5182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5183 = ORIENTED_EDGE('',*,*,#5184,.T.);+#5184 = EDGE_CURVE('',#5169,#5185,#5187,.T.);+#5185 = VERTEX_POINT('',#5186);+#5186 = CARTESIAN_POINT('',(-6.71516994235E-02,0.652708111104,0.59710515+ ));+#5187 = SURFACE_CURVE('',#5188,(#5192),.PCURVE_S1.);+#5188 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5189,#5190,#5191),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5189 = CARTESIAN_POINT('',(-5.844727146973E-02,0.654212017505,+ 0.59710515));+#5190 = CARTESIAN_POINT('',(-6.259440730111E-02,0.654212017505,+ 0.59710515));+#5191 = CARTESIAN_POINT('',(-6.71516994235E-02,0.652708111104,0.59710515+ ));+#5192 = PCURVE('',#5028,#5193);+#5193 = DEFINITIONAL_REPRESENTATION('',(#5194),#5198); #5194 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5195,#5196,#5197), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5195 = CARTESIAN_POINT('',(-0.133551432292,-2.456380208333E-02,- 0.9350001));-#5196 = CARTESIAN_POINT('',(-0.125029296875,-1.55859375E-02,0.9350001));-#5197 = CARTESIAN_POINT('',(-0.118649088542,-8.704427083333E-03,- 0.9350001));-#5198 = PCURVE('',#5130,#5199);-#5199 = DEFINITIONAL_REPRESENTATION('',(#5200),#5204);-#5200 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5201,#5202,#5203),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5201 = CARTESIAN_POINT('',(6.927083333E-03,7.74739583334E-03));-#5202 = CARTESIAN_POINT('',(1.544921875E-02,1.672526041667E-02));-#5203 = CARTESIAN_POINT('',(2.1829427083E-02,2.360677083334E-02));-#5204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5205 = ORIENTED_EDGE('',*,*,#5206,.T.);-#5206 = EDGE_CURVE('',#5191,#5207,#5209,.T.);-#5207 = VERTEX_POINT('',#5208);-#5208 = CARTESIAN_POINT('',(-0.109853515625,1.002604166667E-03,0.9350001- ));-#5209 = SURFACE_CURVE('',#5210,(#5214),.PCURVE_S1.);-#5210 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5211,#5212,#5213),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5211 = CARTESIAN_POINT('',(-0.118649088542,-8.704427083333E-03,- 0.9350001));-#5212 = CARTESIAN_POINT('',(-0.112268880208,-1.822916666667E-03,- 0.9350001));-#5213 = CARTESIAN_POINT('',(-0.109853515625,1.002604166667E-03,0.9350001- ));-#5214 = PCURVE('',#5130,#5215);-#5215 = DEFINITIONAL_REPRESENTATION('',(#5216),#5220);-#5216 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5217,#5218,#5219),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5217 = CARTESIAN_POINT('',(2.1829427083E-02,2.360677083334E-02));-#5218 = CARTESIAN_POINT('',(2.8209635417E-02,3.048828125E-02));-#5219 = CARTESIAN_POINT('',(3.0625E-02,3.331380208334E-02));-#5220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5195 = CARTESIAN_POINT('',(2.583984633398E-02,6.1523443653E-02));+#5196 = CARTESIAN_POINT('',(2.16927105026E-02,6.1523443653E-02));+#5197 = CARTESIAN_POINT('',(1.713541838021E-02,6.0019537252E-02));+#5198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5221 = ORIENTED_EDGE('',*,*,#5222,.T.);-#5222 = EDGE_CURVE('',#5207,#5223,#5225,.T.);-#5223 = VERTEX_POINT('',#5224);-#5224 = CARTESIAN_POINT('',(-0.103701171875,1.000325520833E-02,0.9350001- ));-#5225 = SURFACE_CURVE('',#5226,(#5230),.PCURVE_S1.);-#5226 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5227,#5228,#5229),+#5199 = ORIENTED_EDGE('',*,*,#5200,.T.);+#5200 = EDGE_CURVE('',#5185,#5201,#5203,.T.);+#5201 = VERTEX_POINT('',#5202);+#5202 = CARTESIAN_POINT('',(-7.681315872298E-02,0.648150818982,+ 0.59710515));+#5203 = SURFACE_CURVE('',#5204,(#5208),.PCURVE_S1.);+#5204 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5205,#5206,#5207), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5227 = CARTESIAN_POINT('',(-0.109853515625,1.002604166667E-03,0.9350001+#5205 = CARTESIAN_POINT('',(-6.71516994235E-02,0.652708111104,0.59710515 ));-#5228 = CARTESIAN_POINT('',(-0.105296223958,6.5625E-03,0.9350001));-#5229 = CARTESIAN_POINT('',(-0.103701171875,1.000325520833E-02,0.9350001+#5206 = CARTESIAN_POINT('',(-7.17089915459E-02,0.651204204704,0.59710515 ));-#5230 = PCURVE('',#5130,#5231);-#5231 = DEFINITIONAL_REPRESENTATION('',(#5232),#5236);-#5232 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5233,#5234,#5235),+#5207 = CARTESIAN_POINT('',(-7.681315872298E-02,0.648150818982,+ 0.59710515));+#5208 = PCURVE('',#5028,#5209);+#5209 = DEFINITIONAL_REPRESENTATION('',(#5210),#5214);+#5210 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5211,#5212,#5213), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5233 = CARTESIAN_POINT('',(3.0625E-02,3.331380208334E-02));-#5234 = CARTESIAN_POINT('',(3.5182291667E-02,3.887369791667E-02));-#5235 = CARTESIAN_POINT('',(3.677734375E-02,4.2314453125E-02));-#5236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5237 = ORIENTED_EDGE('',*,*,#5238,.T.);-#5238 = EDGE_CURVE('',#5223,#5239,#5241,.T.);-#5239 = VERTEX_POINT('',#5240);-#5240 = CARTESIAN_POINT('',(-0.102106119792,1.704427083333E-02,0.9350001- ));-#5241 = SURFACE_CURVE('',#5242,(#5246),.PCURVE_S1.);+#5211 = CARTESIAN_POINT('',(1.713541838021E-02,6.0019537252E-02));+#5212 = CARTESIAN_POINT('',(1.257812625781E-02,5.8515630852E-02));+#5213 = CARTESIAN_POINT('',(7.47395908073E-03,5.546224513E-02));+#5214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5215 = ORIENTED_EDGE('',*,*,#5216,.T.);+#5216 = EDGE_CURVE('',#5201,#5217,#5219,.T.);+#5217 = VERTEX_POINT('',#5218);+#5218 = CARTESIAN_POINT('',(-7.681315872298E-02,0.657447694911,+ 0.59710515));+#5219 = SURFACE_CURVE('',#5220,(#5224),.PCURVE_S1.);+#5220 = LINE('',#5221,#5222);+#5221 = CARTESIAN_POINT('',(-7.681315872298E-02,0.648150818982,+ 0.59710515));+#5222 = VECTOR('',#5223,1.);+#5223 = DIRECTION('',(0.,1.,0.));+#5224 = PCURVE('',#5028,#5225);+#5225 = DEFINITIONAL_REPRESENTATION('',(#5226),#5230);+#5226 = LINE('',#5227,#5228);+#5227 = CARTESIAN_POINT('',(7.47395908073E-03,5.546224513E-02));+#5228 = VECTOR('',#5229,1.);+#5229 = DIRECTION('',(0.,1.));+#5230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5231 = ORIENTED_EDGE('',*,*,#5232,.T.);+#5232 = EDGE_CURVE('',#5217,#5233,#5235,.T.);+#5233 = VERTEX_POINT('',#5234);+#5234 = CARTESIAN_POINT('',(-6.758464217513E-02,0.660820091082,+ 0.59710515));+#5235 = SURFACE_CURVE('',#5236,(#5240),.PCURVE_S1.);+#5236 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5237,#5238,#5239),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5237 = CARTESIAN_POINT('',(-7.681315872298E-02,0.657447694911,+ 0.59710515));+#5238 = CARTESIAN_POINT('',(-7.211914783691E-02,0.659680768051,+ 0.59710515));+#5239 = CARTESIAN_POINT('',(-6.758464217513E-02,0.660820091082,+ 0.59710515));+#5240 = PCURVE('',#5028,#5241);+#5241 = DEFINITIONAL_REPRESENTATION('',(#5242),#5246); #5242 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5243,#5244,#5245), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5243 = CARTESIAN_POINT('',(-0.103701171875,1.000325520833E-02,0.9350001- ));-#5244 = CARTESIAN_POINT('',(-0.102106119792,1.344401041667E-02,0.9350001- ));-#5245 = CARTESIAN_POINT('',(-0.102106119792,1.704427083333E-02,0.9350001- ));-#5246 = PCURVE('',#5130,#5247);-#5247 = DEFINITIONAL_REPRESENTATION('',(#5248),#5252);-#5248 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5249,#5250,#5251),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5249 = CARTESIAN_POINT('',(3.677734375E-02,4.2314453125E-02));-#5250 = CARTESIAN_POINT('',(3.8372395833E-02,4.575520833334E-02));-#5251 = CARTESIAN_POINT('',(3.8372395833E-02,4.935546875E-02));-#5252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5253 = ORIENTED_EDGE('',*,*,#5254,.T.);-#5254 = EDGE_CURVE('',#5239,#5255,#5257,.T.);-#5255 = VERTEX_POINT('',#5256);-#5256 = CARTESIAN_POINT('',(-0.105455729167,2.59765625E-02,0.9350001));-#5257 = SURFACE_CURVE('',#5258,(#5262),.PCURVE_S1.);+#5243 = CARTESIAN_POINT('',(7.47395908073E-03,6.4759121059E-02));+#5244 = CARTESIAN_POINT('',(1.21679699668E-02,6.6992194199E-02));+#5245 = CARTESIAN_POINT('',(1.670247562858E-02,6.813151723E-02));+#5246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5247 = ORIENTED_EDGE('',*,*,#5248,.T.);+#5248 = EDGE_CURVE('',#5233,#5249,#5251,.T.);+#5249 = VERTEX_POINT('',#5250);+#5250 = CARTESIAN_POINT('',(-5.862956315462E-02,0.661959414113,+ 0.59710515));+#5251 = SURFACE_CURVE('',#5252,(#5256),.PCURVE_S1.);+#5252 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5253,#5254,#5255),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5253 = CARTESIAN_POINT('',(-6.758464217513E-02,0.660820091082,+ 0.59710515));+#5254 = CARTESIAN_POINT('',(-6.305013651335E-02,0.661959414113,+ 0.59710515));+#5255 = CARTESIAN_POINT('',(-5.862956315462E-02,0.661959414113,+ 0.59710515));+#5256 = PCURVE('',#5028,#5257);+#5257 = DEFINITIONAL_REPRESENTATION('',(#5258),#5262); #5258 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5259,#5260,#5261), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5259 = CARTESIAN_POINT('',(-0.102106119792,1.704427083333E-02,0.9350001- ));-#5260 = CARTESIAN_POINT('',(-0.102106119792,2.274088541667E-02,0.9350001- ));-#5261 = CARTESIAN_POINT('',(-0.105455729167,2.59765625E-02,0.9350001));-#5262 = PCURVE('',#5130,#5263);-#5263 = DEFINITIONAL_REPRESENTATION('',(#5264),#5268);-#5264 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5265,#5266,#5267),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5265 = CARTESIAN_POINT('',(3.8372395833E-02,4.935546875E-02));-#5266 = CARTESIAN_POINT('',(3.8372395833E-02,5.505208333334E-02));-#5267 = CARTESIAN_POINT('',(3.5022786458E-02,5.828776041667E-02));-#5268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5259 = CARTESIAN_POINT('',(1.670247562858E-02,6.813151723E-02));+#5260 = CARTESIAN_POINT('',(2.123698129036E-02,6.9270840261E-02));+#5261 = CARTESIAN_POINT('',(2.565755464909E-02,6.9270840261E-02));+#5262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5269 = ORIENTED_EDGE('',*,*,#5270,.T.);-#5270 = EDGE_CURVE('',#5255,#5271,#5273,.T.);-#5271 = VERTEX_POINT('',#5272);-#5272 = CARTESIAN_POINT('',(-0.114638671875,2.921223958333E-02,0.9350001+#5263 = ORIENTED_EDGE('',*,*,#5264,.T.);+#5264 = EDGE_CURVE('',#5249,#5265,#5267,.T.);+#5265 = VERTEX_POINT('',#5266);+#5266 = CARTESIAN_POINT('',(-4.256510842318E-02,0.65665016879,0.59710515 ));-#5273 = SURFACE_CURVE('',#5274,(#5278),.PCURVE_S1.);-#5274 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5275,#5276,#5277),+#5267 = SURFACE_CURVE('',#5268,(#5272),.PCURVE_S1.);+#5268 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5269,#5270,#5271), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5275 = CARTESIAN_POINT('',(-0.105455729167,2.59765625E-02,0.9350001));-#5276 = CARTESIAN_POINT('',(-0.108805338542,2.921223958333E-02,0.9350001+#5269 = CARTESIAN_POINT('',(-5.862956315462E-02,0.661959414113,+ 0.59710515));+#5270 = CARTESIAN_POINT('',(-4.864909340658E-02,0.661959414113,+ 0.59710515));+#5271 = CARTESIAN_POINT('',(-4.256510842318E-02,0.65665016879,0.59710515 ));-#5277 = CARTESIAN_POINT('',(-0.114638671875,2.921223958333E-02,0.9350001- ));-#5278 = PCURVE('',#5130,#5279);-#5279 = DEFINITIONAL_REPRESENTATION('',(#5280),#5284);-#5280 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5281,#5282,#5283),+#5272 = PCURVE('',#5028,#5273);+#5273 = DEFINITIONAL_REPRESENTATION('',(#5274),#5278);+#5274 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5275,#5276,#5277), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5281 = CARTESIAN_POINT('',(3.5022786458E-02,5.828776041667E-02));-#5282 = CARTESIAN_POINT('',(3.1673177083E-02,6.15234375E-02));-#5283 = CARTESIAN_POINT('',(2.583984375E-02,6.15234375E-02));-#5284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5275 = CARTESIAN_POINT('',(2.565755464909E-02,6.9270840261E-02));+#5276 = CARTESIAN_POINT('',(3.563802439713E-02,6.9270840261E-02));+#5277 = CARTESIAN_POINT('',(4.172200938053E-02,6.3961594938E-02));+#5278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5285 = ORIENTED_EDGE('',*,*,#5286,.T.);-#5286 = EDGE_CURVE('',#5271,#5287,#5289,.T.);-#5287 = VERTEX_POINT('',#5288);-#5288 = CARTESIAN_POINT('',(-0.123343098958,2.770833333333E-02,0.9350001- ));-#5289 = SURFACE_CURVE('',#5290,(#5294),.PCURVE_S1.);-#5290 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5291,#5292,#5293),+#5279 = ORIENTED_EDGE('',*,*,#5280,.T.);+#5280 = EDGE_CURVE('',#5265,#5281,#5283,.T.);+#5281 = VERTEX_POINT('',#5282);+#5282 = CARTESIAN_POINT('',(-3.648112343978E-02,0.642727641356,+ 0.59710515));+#5283 = SURFACE_CURVE('',#5284,(#5288),.PCURVE_S1.);+#5284 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5285,#5286,#5287), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5291 = CARTESIAN_POINT('',(-0.114638671875,2.921223958333E-02,0.9350001+#5285 = CARTESIAN_POINT('',(-4.256510842318E-02,0.65665016879,0.59710515 ));-#5292 = CARTESIAN_POINT('',(-0.118785807292,2.921223958333E-02,0.9350001- ));-#5293 = CARTESIAN_POINT('',(-0.123343098958,2.770833333333E-02,0.9350001- ));-#5294 = PCURVE('',#5130,#5295);-#5295 = DEFINITIONAL_REPRESENTATION('',(#5296),#5300);-#5296 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5297,#5298,#5299),+#5286 = CARTESIAN_POINT('',(-3.648112343978E-02,0.651340923467,+ 0.59710515));+#5287 = CARTESIAN_POINT('',(-3.648112343978E-02,0.642727641356,+ 0.59710515));+#5288 = PCURVE('',#5028,#5289);+#5289 = DEFINITIONAL_REPRESENTATION('',(#5290),#5294);+#5290 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5291,#5292,#5293), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5297 = CARTESIAN_POINT('',(2.583984375E-02,6.15234375E-02));-#5298 = CARTESIAN_POINT('',(2.1692708333E-02,6.15234375E-02));-#5299 = CARTESIAN_POINT('',(1.7135416667E-02,6.001953125E-02));-#5300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5301 = ORIENTED_EDGE('',*,*,#5302,.T.);-#5302 = EDGE_CURVE('',#5287,#5303,#5305,.T.);-#5303 = VERTEX_POINT('',#5304);-#5304 = CARTESIAN_POINT('',(-0.133004557292,2.315104166667E-02,0.9350001- ));-#5305 = SURFACE_CURVE('',#5306,(#5310),.PCURVE_S1.);+#5291 = CARTESIAN_POINT('',(4.172200938053E-02,6.3961594938E-02));+#5292 = CARTESIAN_POINT('',(4.780599436393E-02,5.8652349615E-02));+#5293 = CARTESIAN_POINT('',(4.780599436393E-02,5.0039067504E-02));+#5294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5295 = ORIENTED_EDGE('',*,*,#5296,.T.);+#5296 = EDGE_CURVE('',#5281,#5297,#5299,.T.);+#5297 = VERTEX_POINT('',#5298);+#5298 = CARTESIAN_POINT('',(-3.850911843424E-02,0.633977640481,+ 0.59710515));+#5299 = SURFACE_CURVE('',#5300,(#5304),.PCURVE_S1.);+#5300 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5301,#5302,#5303),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5301 = CARTESIAN_POINT('',(-3.648112343978E-02,0.642727641356,+ 0.59710515));+#5302 = CARTESIAN_POINT('',(-3.648112343978E-02,0.638352640919,+ 0.59710515));+#5303 = CARTESIAN_POINT('',(-3.850911843424E-02,0.633977640481,+ 0.59710515));+#5304 = PCURVE('',#5028,#5305);+#5305 = DEFINITIONAL_REPRESENTATION('',(#5306),#5310); #5306 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5307,#5308,#5309), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5307 = CARTESIAN_POINT('',(-0.123343098958,2.770833333333E-02,0.9350001- ));-#5308 = CARTESIAN_POINT('',(-0.127900390625,2.620442708333E-02,0.9350001- ));-#5309 = CARTESIAN_POINT('',(-0.133004557292,2.315104166667E-02,0.9350001- ));-#5310 = PCURVE('',#5130,#5311);-#5311 = DEFINITIONAL_REPRESENTATION('',(#5312),#5316);-#5312 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5313,#5314,#5315),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5313 = CARTESIAN_POINT('',(1.7135416667E-02,6.001953125E-02));-#5314 = CARTESIAN_POINT('',(1.2578125E-02,5.8515625E-02));-#5315 = CARTESIAN_POINT('',(7.473958333E-03,5.546223958334E-02));-#5316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5317 = ORIENTED_EDGE('',*,*,#5318,.T.);-#5318 = EDGE_CURVE('',#5303,#5319,#5321,.T.);-#5319 = VERTEX_POINT('',#5320);-#5320 = CARTESIAN_POINT('',(-0.133004557292,3.244791666667E-02,0.9350001- ));-#5321 = SURFACE_CURVE('',#5322,(#5326),.PCURVE_S1.);-#5322 = LINE('',#5323,#5324);-#5323 = CARTESIAN_POINT('',(-0.133004557292,2.315104166667E-02,0.9350001- ));-#5324 = VECTOR('',#5325,1.);-#5325 = DIRECTION('',(0.,1.,0.));-#5326 = PCURVE('',#5130,#5327);-#5327 = DEFINITIONAL_REPRESENTATION('',(#5328),#5332);-#5328 = LINE('',#5329,#5330);-#5329 = CARTESIAN_POINT('',(7.473958333E-03,5.546223958334E-02));-#5330 = VECTOR('',#5331,1.);-#5331 = DIRECTION('',(0.,1.));-#5332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5333 = ORIENTED_EDGE('',*,*,#5334,.T.);-#5334 = EDGE_CURVE('',#5319,#5335,#5337,.T.);-#5335 = VERTEX_POINT('',#5336);-#5336 = CARTESIAN_POINT('',(-0.123776041667,3.58203125E-02,0.9350001));-#5337 = SURFACE_CURVE('',#5338,(#5342),.PCURVE_S1.);+#5307 = CARTESIAN_POINT('',(4.780599436393E-02,5.0039067504E-02));+#5308 = CARTESIAN_POINT('',(4.780599436393E-02,4.5664067067E-02));+#5309 = CARTESIAN_POINT('',(4.577799936947E-02,4.1289066629E-02));+#5310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5311 = ORIENTED_EDGE('',*,*,#5312,.T.);+#5312 = EDGE_CURVE('',#5297,#5313,#5315,.T.);+#5313 = VERTEX_POINT('',#5314);+#5314 = CARTESIAN_POINT('',(-4.509440555111E-02,0.624316181182,+ 0.59710515));+#5315 = SURFACE_CURVE('',#5316,(#5320),.PCURVE_S1.);+#5316 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5317,#5318,#5319),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5317 = CARTESIAN_POINT('',(-3.850911843424E-02,0.633977640481,+ 0.59710515));+#5318 = CARTESIAN_POINT('',(-4.053711342871E-02,0.629602640044,+ 0.59710515));+#5319 = CARTESIAN_POINT('',(-4.509440555111E-02,0.624316181182,+ 0.59710515));+#5320 = PCURVE('',#5028,#5321);+#5321 = DEFINITIONAL_REPRESENTATION('',(#5322),#5326);+#5322 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5323,#5324,#5325),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5323 = CARTESIAN_POINT('',(4.577799936947E-02,4.1289066629E-02));+#5324 = CARTESIAN_POINT('',(4.3750004375E-02,3.6914066192E-02));+#5325 = CARTESIAN_POINT('',(3.91927122526E-02,3.162760733E-02));+#5326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5327 = ORIENTED_EDGE('',*,*,#5328,.T.);+#5328 = EDGE_CURVE('',#5313,#5329,#5331,.T.);+#5329 = VERTEX_POINT('',#5330);+#5330 = CARTESIAN_POINT('',(-5.250000525E-02,0.616113055361,0.59710515)+ );+#5331 = SURFACE_CURVE('',#5332,(#5336),.PCURVE_S1.);+#5332 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5333,#5334,#5335),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5333 = CARTESIAN_POINT('',(-4.509440555111E-02,0.624316181182,+ 0.59710515));+#5334 = CARTESIAN_POINT('',(-4.764648913965E-02,0.621353941302,+ 0.59710515));+#5335 = CARTESIAN_POINT('',(-5.250000525E-02,0.616113055361,0.59710515)+ );+#5336 = PCURVE('',#5028,#5337);+#5337 = DEFINITIONAL_REPRESENTATION('',(#5338),#5342); #5338 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5339,#5340,#5341), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5339 = CARTESIAN_POINT('',(-0.133004557292,3.244791666667E-02,0.9350001- ));-#5340 = CARTESIAN_POINT('',(-0.128310546875,3.468098958333E-02,0.9350001- ));-#5341 = CARTESIAN_POINT('',(-0.123776041667,3.58203125E-02,0.9350001));-#5342 = PCURVE('',#5130,#5343);-#5343 = DEFINITIONAL_REPRESENTATION('',(#5344),#5348);-#5344 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5345,#5346,#5347),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5345 = CARTESIAN_POINT('',(7.473958333E-03,6.475911458334E-02));-#5346 = CARTESIAN_POINT('',(1.216796875E-02,6.69921875E-02));-#5347 = CARTESIAN_POINT('',(1.6702473958E-02,6.813151041667E-02));-#5348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5339 = CARTESIAN_POINT('',(3.91927122526E-02,3.162760733E-02));+#5340 = CARTESIAN_POINT('',(3.664062866406E-02,2.866536745E-02));+#5341 = CARTESIAN_POINT('',(3.178711255371E-02,2.3424481509E-02));+#5342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5349 = ORIENTED_EDGE('',*,*,#5350,.T.);-#5350 = EDGE_CURVE('',#5335,#5351,#5353,.T.);-#5351 = VERTEX_POINT('',#5352);-#5352 = CARTESIAN_POINT('',(-0.114820963542,3.695963541667E-02,0.9350001- ));-#5353 = SURFACE_CURVE('',#5354,(#5358),.PCURVE_S1.);-#5354 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5355,#5356,#5357),+#5343 = ORIENTED_EDGE('',*,*,#5344,.T.);+#5344 = EDGE_CURVE('',#5329,#5018,#5345,.T.);+#5345 = SURFACE_CURVE('',#5346,(#5350),.PCURVE_S1.);+#5346 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5347,#5348,#5349), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5355 = CARTESIAN_POINT('',(-0.123776041667,3.58203125E-02,0.9350001));-#5356 = CARTESIAN_POINT('',(-0.119241536458,3.695963541667E-02,0.9350001- ));-#5357 = CARTESIAN_POINT('',(-0.114820963542,3.695963541667E-02,0.9350001- ));-#5358 = PCURVE('',#5130,#5359);-#5359 = DEFINITIONAL_REPRESENTATION('',(#5360),#5364);-#5360 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5361,#5362,#5363),+#5347 = CARTESIAN_POINT('',(-5.250000525E-02,0.616113055361,0.59710515)+ );+#5348 = CARTESIAN_POINT('',(-5.735352136035E-02,0.610872169421,+ 0.59710515));+#5349 = CARTESIAN_POINT('',(-6.728841818717E-02,0.60043597046,0.59710515+ ));+#5350 = PCURVE('',#5028,#5351);+#5351 = DEFINITIONAL_REPRESENTATION('',(#5352),#5356);+#5352 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5353,#5354,#5355), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5361 = CARTESIAN_POINT('',(1.6702473958E-02,6.813151041667E-02));-#5362 = CARTESIAN_POINT('',(2.1236979167E-02,6.927083333334E-02));-#5363 = CARTESIAN_POINT('',(2.5657552083E-02,6.927083333334E-02));-#5364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5353 = CARTESIAN_POINT('',(3.178711255371E-02,2.3424481509E-02));+#5354 = CARTESIAN_POINT('',(2.693359644336E-02,1.8183595569E-02));+#5355 = CARTESIAN_POINT('',(1.699869961654E-02,7.747396608E-03));+#5356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5357 = SHELL_BASED_SURFACE_MODEL('',(#5358));+#5358 = OPEN_SHELL('',(#5359));+#5359 = ADVANCED_FACE('',(#5360,#5639),#5374,.T.);+#5360 = FACE_BOUND('',#5361,.F.);+#5361 = EDGE_LOOP('',(#5362,#5385,#5401,#5417,#5433,#5449,#5465,#5481,+ #5497,#5513,#5529,#5545,#5561,#5577,#5593,#5609,#5625));+#5362 = ORIENTED_EDGE('',*,*,#5363,.T.);+#5363 = EDGE_CURVE('',#5364,#5366,#5368,.T.);+#5364 = VERTEX_POINT('',#5365);+#5365 = CARTESIAN_POINT('',(1.706705899837E-02,0.659225038839,0.59710515+ ));+#5366 = VERTEX_POINT('',#5367);+#5367 = CARTESIAN_POINT('',(1.706705899837E-02,0.650748475492,0.59710515+ ));+#5368 = SURFACE_CURVE('',#5369,(#5373),.PCURVE_S1.);+#5369 = LINE('',#5370,#5371);+#5370 = CARTESIAN_POINT('',(1.706705899837E-02,0.659225038839,0.59710515+ ));+#5371 = VECTOR('',#5372,1.);+#5372 = DIRECTION('',(0.,-1.,0.));+#5373 = PCURVE('',#5374,#5379);+#5374 = PLANE('',#5375);+#5375 = AXIS2_PLACEMENT_3D('',#5376,#5377,#5378);+#5376 = CARTESIAN_POINT('',(-2.809570593457E-02,0.592688573852,+ 0.59710515));+#5377 = DIRECTION('',(0.,0.,1.));+#5378 = DIRECTION('',(1.,0.,-0.));+#5379 = DEFINITIONAL_REPRESENTATION('',(#5380),#5384);+#5380 = LINE('',#5381,#5382);+#5381 = CARTESIAN_POINT('',(4.516276493294E-02,6.6536464987E-02));+#5382 = VECTOR('',#5383,1.);+#5383 = DIRECTION('',(0.,-1.));+#5384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5385 = ORIENTED_EDGE('',*,*,#5386,.T.);+#5386 = EDGE_CURVE('',#5366,#5387,#5389,.T.);+#5387 = VERTEX_POINT('',#5388);+#5388 = CARTESIAN_POINT('',(1.096028755436E-02,0.653323345541,0.59710515+ ));+#5389 = SURFACE_CURVE('',#5390,(#5394),.PCURVE_S1.);+#5390 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5391,#5392,#5393),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5391 = CARTESIAN_POINT('',(1.706705899837E-02,0.650748475492,0.59710515+ ));+#5392 = CARTESIAN_POINT('',(1.419596496126E-02,0.652434673577,0.59710515+ ));+#5393 = CARTESIAN_POINT('',(1.096028755436E-02,0.653323345541,0.59710515+ ));+#5394 = PCURVE('',#5374,#5395);+#5395 = DEFINITIONAL_REPRESENTATION('',(#5396),#5400);+#5396 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5397,#5398,#5399),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5397 = CARTESIAN_POINT('',(4.516276493294E-02,5.805990164E-02));+#5398 = CARTESIAN_POINT('',(4.229167089583E-02,5.9746099725E-02));+#5399 = CARTESIAN_POINT('',(3.905599348893E-02,6.0634771689E-02));+#5400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5401 = ORIENTED_EDGE('',*,*,#5402,.T.);+#5402 = EDGE_CURVE('',#5387,#5403,#5405,.T.);+#5403 = VERTEX_POINT('',#5404);+#5404 = CARTESIAN_POINT('',(4.215495213216E-03,0.654212017505,0.59710515+ ));+#5405 = SURFACE_CURVE('',#5406,(#5410),.PCURVE_S1.);+#5406 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5407,#5408,#5409),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5407 = CARTESIAN_POINT('',(1.096028755436E-02,0.653323345541,0.59710515+ ));+#5408 = CARTESIAN_POINT('',(7.724610147461E-03,0.654212017505,0.59710515+ ));+#5409 = CARTESIAN_POINT('',(4.215495213216E-03,0.654212017505,0.59710515+ ));+#5410 = PCURVE('',#5374,#5411);+#5411 = DEFINITIONAL_REPRESENTATION('',(#5412),#5416);+#5412 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5413,#5414,#5415),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5413 = CARTESIAN_POINT('',(3.905599348893E-02,6.0634771689E-02));+#5414 = CARTESIAN_POINT('',(3.582031608203E-02,6.1523443653E-02));+#5415 = CARTESIAN_POINT('',(3.231120114779E-02,6.1523443653E-02));+#5416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5417 = ORIENTED_EDGE('',*,*,#5418,.T.);+#5418 = EDGE_CURVE('',#5403,#5419,#5421,.T.);+#5419 = VERTEX_POINT('',#5420);+#5420 = CARTESIAN_POINT('',(-9.046224862956E-03,0.647626730388,+ 0.59710515));+#5421 = SURFACE_CURVE('',#5422,(#5426),.PCURVE_S1.);+#5422 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5423,#5424,#5425),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5423 = CARTESIAN_POINT('',(4.215495213216E-03,0.654212017505,0.59710515+ ));+#5424 = CARTESIAN_POINT('',(-4.534505661784E-03,0.654212017505,+ 0.59710515));+#5425 = CARTESIAN_POINT('',(-9.046224862956E-03,0.647626730388,+ 0.59710515));+#5426 = PCURVE('',#5374,#5427);+#5427 = DEFINITIONAL_REPRESENTATION('',(#5428),#5432);+#5428 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5429,#5430,#5431),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5429 = CARTESIAN_POINT('',(3.231120114779E-02,6.1523443653E-02));+#5430 = CARTESIAN_POINT('',(2.356120027279E-02,6.1523443653E-02));+#5431 = CARTESIAN_POINT('',(1.904948107161E-02,5.4938156536E-02));+#5432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5433 = ORIENTED_EDGE('',*,*,#5434,.T.);+#5434 = EDGE_CURVE('',#5419,#5435,#5437,.T.);+#5435 = VERTEX_POINT('',#5436);+#5436 = CARTESIAN_POINT('',(-1.355794406413E-02,0.628235452407,+ 0.59710515));+#5437 = SURFACE_CURVE('',#5438,(#5442),.PCURVE_S1.);+#5438 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5439,#5440,#5441),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5439 = CARTESIAN_POINT('',(-9.046224862956E-03,0.647626730388,+ 0.59710515));+#5440 = CARTESIAN_POINT('',(-1.355794406413E-02,0.641041443271,+ 0.59710515));+#5441 = CARTESIAN_POINT('',(-1.355794406413E-02,0.628235452407,+ 0.59710515));+#5442 = PCURVE('',#5374,#5443);+#5443 = DEFINITIONAL_REPRESENTATION('',(#5444),#5448);+#5444 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5445,#5446,#5447),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5445 = CARTESIAN_POINT('',(1.904948107161E-02,5.4938156536E-02));+#5446 = CARTESIAN_POINT('',(1.453776187044E-02,4.8352869419E-02));+#5447 = CARTESIAN_POINT('',(1.453776187044E-02,3.5546878555E-02));+#5448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5365 = ORIENTED_EDGE('',*,*,#5366,.T.);-#5366 = EDGE_CURVE('',#5351,#5367,#5369,.T.);-#5367 = VERTEX_POINT('',#5368);-#5368 = CARTESIAN_POINT('',(-9.875651041667E-02,3.1650390625E-02,- 0.9350001));-#5369 = SURFACE_CURVE('',#5370,(#5374),.PCURVE_S1.);-#5370 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5371,#5372,#5373),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5371 = CARTESIAN_POINT('',(-0.114820963542,3.695963541667E-02,0.9350001- ));-#5372 = CARTESIAN_POINT('',(-0.104840494792,3.695963541667E-02,0.9350001- ));-#5373 = CARTESIAN_POINT('',(-9.875651041667E-02,3.1650390625E-02,- 0.9350001));-#5374 = PCURVE('',#5130,#5375);-#5375 = DEFINITIONAL_REPRESENTATION('',(#5376),#5380);-#5376 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5377,#5378,#5379),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5377 = CARTESIAN_POINT('',(2.5657552083E-02,6.927083333334E-02));-#5378 = CARTESIAN_POINT('',(3.5638020833E-02,6.927083333334E-02));-#5379 = CARTESIAN_POINT('',(4.172200520833E-02,6.396158854167E-02));-#5380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5381 = ORIENTED_EDGE('',*,*,#5382,.T.);-#5382 = EDGE_CURVE('',#5367,#5383,#5385,.T.);-#5383 = VERTEX_POINT('',#5384);-#5384 = CARTESIAN_POINT('',(-9.267252604167E-02,1.772786458333E-02,- 0.9350001));-#5385 = SURFACE_CURVE('',#5386,(#5390),.PCURVE_S1.);-#5386 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5387,#5388,#5389),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5387 = CARTESIAN_POINT('',(-9.875651041667E-02,3.1650390625E-02,- 0.9350001));-#5388 = CARTESIAN_POINT('',(-9.267252604167E-02,2.634114583333E-02,- 0.9350001));-#5389 = CARTESIAN_POINT('',(-9.267252604167E-02,1.772786458333E-02,- 0.9350001));-#5390 = PCURVE('',#5130,#5391);-#5391 = DEFINITIONAL_REPRESENTATION('',(#5392),#5396);-#5392 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5393,#5394,#5395),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5393 = CARTESIAN_POINT('',(4.172200520833E-02,6.396158854167E-02));-#5394 = CARTESIAN_POINT('',(4.780598958333E-02,5.865234375E-02));-#5395 = CARTESIAN_POINT('',(4.780598958333E-02,5.00390625E-02));-#5396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5397 = ORIENTED_EDGE('',*,*,#5398,.T.);-#5398 = EDGE_CURVE('',#5383,#5399,#5401,.T.);-#5399 = VERTEX_POINT('',#5400);-#5400 = CARTESIAN_POINT('',(-9.470052083333E-02,8.977864583333E-03,- 0.9350001));-#5401 = SURFACE_CURVE('',#5402,(#5406),.PCURVE_S1.);-#5402 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5403,#5404,#5405),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5403 = CARTESIAN_POINT('',(-9.267252604167E-02,1.772786458333E-02,- 0.9350001));-#5404 = CARTESIAN_POINT('',(-9.267252604167E-02,1.335286458333E-02,- 0.9350001));-#5405 = CARTESIAN_POINT('',(-9.470052083333E-02,8.977864583333E-03,- 0.9350001));-#5406 = PCURVE('',#5130,#5407);-#5407 = DEFINITIONAL_REPRESENTATION('',(#5408),#5412);-#5408 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5409,#5410,#5411),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5409 = CARTESIAN_POINT('',(4.780598958333E-02,5.00390625E-02));-#5410 = CARTESIAN_POINT('',(4.780598958333E-02,4.56640625E-02));-#5411 = CARTESIAN_POINT('',(4.577799479167E-02,4.12890625E-02));-#5412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5413 = ORIENTED_EDGE('',*,*,#5414,.T.);-#5414 = EDGE_CURVE('',#5399,#5415,#5417,.T.);-#5415 = VERTEX_POINT('',#5416);-#5416 = CARTESIAN_POINT('',(-0.101285807292,-6.8359375E-04,0.9350001));-#5417 = SURFACE_CURVE('',#5418,(#5422),.PCURVE_S1.);-#5418 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5419,#5420,#5421),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5419 = CARTESIAN_POINT('',(-9.470052083333E-02,8.977864583333E-03,- 0.9350001));-#5420 = CARTESIAN_POINT('',(-9.6728515625E-02,4.602864583333E-03,- 0.9350001));-#5421 = CARTESIAN_POINT('',(-0.101285807292,-6.8359375E-04,0.9350001));-#5422 = PCURVE('',#5130,#5423);-#5423 = DEFINITIONAL_REPRESENTATION('',(#5424),#5428);-#5424 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5425,#5426,#5427),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5425 = CARTESIAN_POINT('',(4.577799479167E-02,4.12890625E-02));-#5426 = CARTESIAN_POINT('',(4.375E-02,3.69140625E-02));-#5427 = CARTESIAN_POINT('',(3.9192708333E-02,3.162760416667E-02));-#5428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5429 = ORIENTED_EDGE('',*,*,#5430,.T.);-#5430 = EDGE_CURVE('',#5415,#5431,#5433,.T.);-#5431 = VERTEX_POINT('',#5432);-#5432 = CARTESIAN_POINT('',(-0.10869140625,-8.88671875E-03,0.9350001));-#5433 = SURFACE_CURVE('',#5434,(#5438),.PCURVE_S1.);-#5434 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5435,#5436,#5437),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5435 = CARTESIAN_POINT('',(-0.101285807292,-6.8359375E-04,0.9350001));-#5436 = CARTESIAN_POINT('',(-0.103837890625,-3.645833333333E-03,- 0.9350001));-#5437 = CARTESIAN_POINT('',(-0.10869140625,-8.88671875E-03,0.9350001));-#5438 = PCURVE('',#5130,#5439);-#5439 = DEFINITIONAL_REPRESENTATION('',(#5440),#5444);-#5440 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5441,#5442,#5443),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5441 = CARTESIAN_POINT('',(3.9192708333E-02,3.162760416667E-02));-#5442 = CARTESIAN_POINT('',(3.6640625E-02,2.866536458334E-02));-#5443 = CARTESIAN_POINT('',(3.1787109375E-02,2.342447916667E-02));-#5444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5445 = ORIENTED_EDGE('',*,*,#5446,.T.);-#5446 = EDGE_CURVE('',#5431,#5120,#5447,.T.);-#5447 = SURFACE_CURVE('',#5448,(#5452),.PCURVE_S1.);-#5448 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5449,#5450,#5451),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5449 = CARTESIAN_POINT('',(-0.10869140625,-8.88671875E-03,0.9350001));-#5450 = CARTESIAN_POINT('',(-0.113544921875,-1.412760416667E-02,- 0.9350001));-#5451 = CARTESIAN_POINT('',(-0.123479817708,-2.456380208333E-02,- 0.9350001));-#5452 = PCURVE('',#5130,#5453);-#5453 = DEFINITIONAL_REPRESENTATION('',(#5454),#5458);+#5449 = ORIENTED_EDGE('',*,*,#5450,.T.);+#5450 = EDGE_CURVE('',#5435,#5451,#5453,.T.);+#5451 = VERTEX_POINT('',#5452);+#5452 = CARTESIAN_POINT('',(-7.496745541341E-03,0.635230895815,+ 0.59710515));+#5453 = SURFACE_CURVE('',#5454,(#5458),.PCURVE_S1.); #5454 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5455,#5456,#5457), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5455 = CARTESIAN_POINT('',(3.1787109375E-02,2.342447916667E-02));-#5456 = CARTESIAN_POINT('',(2.693359375E-02,1.818359375E-02));-#5457 = CARTESIAN_POINT('',(1.6998697917E-02,7.74739583334E-03));-#5458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5459 = SHELL_BASED_SURFACE_MODEL('',(#5460));-#5460 = OPEN_SHELL('',(#5461));-#5461 = ADVANCED_FACE('',(#5462),#5476,.T.);-#5462 = FACE_BOUND('',#5463,.F.);-#5463 = EDGE_LOOP('',(#5464,#5487,#5503,#5519,#5535,#5551,#5567,#5583,- #5599,#5615,#5631,#5647,#5663,#5679,#5695,#5711,#5727,#5743,#5759,- #5775,#5791));-#5464 = ORIENTED_EDGE('',*,*,#5465,.T.);-#5465 = EDGE_CURVE('',#5466,#5468,#5470,.T.);-#5466 = VERTEX_POINT('',#5467);-#5467 = CARTESIAN_POINT('',(-6.728841145833E-02,-2.456380208333E-02,- 0.9350001));-#5468 = VERTEX_POINT('',#5469);-#5469 = CARTESIAN_POINT('',(-3.6025390625E-02,-2.456380208333E-02,- 0.9350001));-#5470 = SURFACE_CURVE('',#5471,(#5475),.PCURVE_S1.);-#5471 = LINE('',#5472,#5473);-#5472 = CARTESIAN_POINT('',(-6.728841145833E-02,-2.456380208333E-02,- 0.9350001));-#5473 = VECTOR('',#5474,1.);-#5474 = DIRECTION('',(1.,0.,0.));-#5475 = PCURVE('',#5476,#5481);-#5476 = PLANE('',#5477);-#5477 = AXIS2_PLACEMENT_3D('',#5478,#5479,#5480);-#5478 = CARTESIAN_POINT('',(-8.4287109375E-02,-3.231119791667E-02,- 0.9350001));-#5479 = DIRECTION('',(0.,0.,1.));-#5480 = DIRECTION('',(1.,0.,-0.));-#5481 = DEFINITIONAL_REPRESENTATION('',(#5482),#5486);-#5482 = LINE('',#5483,#5484);-#5483 = CARTESIAN_POINT('',(1.699869791667E-02,7.74739583334E-03));-#5484 = VECTOR('',#5485,1.);-#5485 = DIRECTION('',(1.,0.));-#5486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5487 = ORIENTED_EDGE('',*,*,#5488,.T.);-#5488 = EDGE_CURVE('',#5468,#5489,#5491,.T.);-#5489 = VERTEX_POINT('',#5490);-#5490 = CARTESIAN_POINT('',(-3.6025390625E-02,-3.231119791667E-02,- 0.9350001));-#5491 = SURFACE_CURVE('',#5492,(#5496),.PCURVE_S1.);-#5492 = LINE('',#5493,#5494);-#5493 = CARTESIAN_POINT('',(-3.6025390625E-02,-2.456380208333E-02,- 0.9350001));-#5494 = VECTOR('',#5495,1.);-#5495 = DIRECTION('',(0.,-1.,0.));-#5496 = PCURVE('',#5476,#5497);-#5497 = DEFINITIONAL_REPRESENTATION('',(#5498),#5502);-#5498 = LINE('',#5499,#5500);-#5499 = CARTESIAN_POINT('',(4.826171875E-02,7.74739583334E-03));-#5500 = VECTOR('',#5501,1.);-#5501 = DIRECTION('',(0.,-1.));-#5502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5503 = ORIENTED_EDGE('',*,*,#5504,.T.);-#5504 = EDGE_CURVE('',#5489,#5505,#5507,.T.);-#5505 = VERTEX_POINT('',#5506);-#5506 = CARTESIAN_POINT('',(-7.736002604167E-02,-3.231119791667E-02,- 0.9350001));-#5507 = SURFACE_CURVE('',#5508,(#5512),.PCURVE_S1.);-#5508 = LINE('',#5509,#5510);-#5509 = CARTESIAN_POINT('',(-3.6025390625E-02,-3.231119791667E-02,- 0.9350001));-#5510 = VECTOR('',#5511,1.);-#5511 = DIRECTION('',(-1.,0.,0.));-#5512 = PCURVE('',#5476,#5513);-#5513 = DEFINITIONAL_REPRESENTATION('',(#5514),#5518);-#5514 = LINE('',#5515,#5516);-#5515 = CARTESIAN_POINT('',(4.826171875E-02,0.));-#5516 = VECTOR('',#5517,1.);-#5517 = DIRECTION('',(-1.,0.));-#5518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5519 = ORIENTED_EDGE('',*,*,#5520,.T.);-#5520 = EDGE_CURVE('',#5505,#5521,#5523,.T.);-#5521 = VERTEX_POINT('',#5522);-#5522 = CARTESIAN_POINT('',(-7.736002604167E-02,-2.456380208333E-02,- 0.9350001));-#5523 = SURFACE_CURVE('',#5524,(#5528),.PCURVE_S1.);-#5524 = LINE('',#5525,#5526);-#5525 = CARTESIAN_POINT('',(-7.736002604167E-02,-3.231119791667E-02,- 0.9350001));-#5526 = VECTOR('',#5527,1.);-#5527 = DIRECTION('',(0.,1.,0.));-#5528 = PCURVE('',#5476,#5529);-#5529 = DEFINITIONAL_REPRESENTATION('',(#5530),#5534);-#5530 = LINE('',#5531,#5532);-#5531 = CARTESIAN_POINT('',(6.92708333333E-03,0.));-#5532 = VECTOR('',#5533,1.);-#5533 = DIRECTION('',(0.,1.));-#5534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5535 = ORIENTED_EDGE('',*,*,#5536,.T.);-#5536 = EDGE_CURVE('',#5521,#5537,#5539,.T.);-#5537 = VERTEX_POINT('',#5538);-#5538 = CARTESIAN_POINT('',(-6.245768229167E-02,-8.704427083333E-03,- 0.9350001));-#5539 = SURFACE_CURVE('',#5540,(#5544),.PCURVE_S1.);-#5540 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5541,#5542,#5543),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5541 = CARTESIAN_POINT('',(-7.736002604167E-02,-2.456380208333E-02,- 0.9350001));-#5542 = CARTESIAN_POINT('',(-6.8837890625E-02,-1.55859375E-02,0.9350001)+#5455 = CARTESIAN_POINT('',(-1.355794406413E-02,0.628235452407,+ 0.59710515));+#5456 = CARTESIAN_POINT('',(-1.137044384538E-02,0.632792744529,+ 0.59710515));+#5457 = CARTESIAN_POINT('',(-7.496745541341E-03,0.635230895815,+ 0.59710515));+#5458 = PCURVE('',#5374,#5459);+#5459 = DEFINITIONAL_REPRESENTATION('',(#5460),#5464);+#5460 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5461,#5462,#5463),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5461 = CARTESIAN_POINT('',(1.453776187044E-02,3.5546878555E-02));+#5462 = CARTESIAN_POINT('',(1.672526208919E-02,4.0104170677E-02));+#5463 = CARTESIAN_POINT('',(2.059896039323E-02,4.2542321963E-02));+#5464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5465 = ORIENTED_EDGE('',*,*,#5466,.T.);+#5466 = EDGE_CURVE('',#5451,#5467,#5469,.T.);+#5467 = VERTEX_POINT('',#5468);+#5468 = CARTESIAN_POINT('',(1.389974097331E-03,0.6376690471,0.59710515) );-#5543 = CARTESIAN_POINT('',(-6.245768229167E-02,-8.704427083333E-03,- 0.9350001));-#5544 = PCURVE('',#5476,#5545);-#5545 = DEFINITIONAL_REPRESENTATION('',(#5546),#5550);-#5546 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5547,#5548,#5549),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5547 = CARTESIAN_POINT('',(6.92708333333E-03,7.74739583334E-03));-#5548 = CARTESIAN_POINT('',(1.544921875E-02,1.672526041667E-02));-#5549 = CARTESIAN_POINT('',(2.182942708333E-02,2.360677083334E-02));-#5550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5551 = ORIENTED_EDGE('',*,*,#5552,.T.);-#5552 = EDGE_CURVE('',#5537,#5553,#5555,.T.);-#5553 = VERTEX_POINT('',#5554);-#5554 = CARTESIAN_POINT('',(-5.3662109375E-02,1.002604166667E-03,- 0.9350001));-#5555 = SURFACE_CURVE('',#5556,(#5560),.PCURVE_S1.);-#5556 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5557,#5558,#5559),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5557 = CARTESIAN_POINT('',(-6.245768229167E-02,-8.704427083333E-03,- 0.9350001));-#5558 = CARTESIAN_POINT('',(-5.607747395833E-02,-1.822916666667E-03,- 0.9350001));-#5559 = CARTESIAN_POINT('',(-5.3662109375E-02,1.002604166667E-03,- 0.9350001));-#5560 = PCURVE('',#5476,#5561);-#5561 = DEFINITIONAL_REPRESENTATION('',(#5562),#5566);-#5562 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5563,#5564,#5565),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5563 = CARTESIAN_POINT('',(2.182942708333E-02,2.360677083334E-02));-#5564 = CARTESIAN_POINT('',(2.820963541667E-02,3.048828125E-02));-#5565 = CARTESIAN_POINT('',(3.0625E-02,3.331380208334E-02));-#5566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5567 = ORIENTED_EDGE('',*,*,#5568,.T.);-#5568 = EDGE_CURVE('',#5553,#5569,#5571,.T.);-#5569 = VERTEX_POINT('',#5570);-#5570 = CARTESIAN_POINT('',(-4.7509765625E-02,1.000325520833E-02,- 0.9350001));-#5571 = SURFACE_CURVE('',#5572,(#5576),.PCURVE_S1.);-#5572 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5573,#5574,#5575),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5573 = CARTESIAN_POINT('',(-5.3662109375E-02,1.002604166667E-03,- 0.9350001));-#5574 = CARTESIAN_POINT('',(-4.910481770833E-02,6.5625E-03,0.9350001));-#5575 = CARTESIAN_POINT('',(-4.7509765625E-02,1.000325520833E-02,- 0.9350001));-#5576 = PCURVE('',#5476,#5577);-#5577 = DEFINITIONAL_REPRESENTATION('',(#5578),#5582);-#5578 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5579,#5580,#5581),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5579 = CARTESIAN_POINT('',(3.0625E-02,3.331380208334E-02));-#5580 = CARTESIAN_POINT('',(3.518229166667E-02,3.887369791667E-02));-#5581 = CARTESIAN_POINT('',(3.677734375E-02,4.2314453125E-02));-#5582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5583 = ORIENTED_EDGE('',*,*,#5584,.T.);-#5584 = EDGE_CURVE('',#5569,#5585,#5587,.T.);-#5585 = VERTEX_POINT('',#5586);-#5586 = CARTESIAN_POINT('',(-4.591471354167E-02,1.704427083333E-02,- 0.9350001));-#5587 = SURFACE_CURVE('',#5588,(#5592),.PCURVE_S1.);-#5588 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5589,#5590,#5591),+#5469 = SURFACE_CURVE('',#5470,(#5474),.PCURVE_S1.);+#5470 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5471,#5472,#5473), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5589 = CARTESIAN_POINT('',(-4.7509765625E-02,1.000325520833E-02,- 0.9350001));-#5590 = CARTESIAN_POINT('',(-4.591471354167E-02,1.344401041667E-02,- 0.9350001));-#5591 = CARTESIAN_POINT('',(-4.591471354167E-02,1.704427083333E-02,- 0.9350001));-#5592 = PCURVE('',#5476,#5593);-#5593 = DEFINITIONAL_REPRESENTATION('',(#5594),#5598);-#5594 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5595,#5596,#5597),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5595 = CARTESIAN_POINT('',(3.677734375E-02,4.2314453125E-02));-#5596 = CARTESIAN_POINT('',(3.837239583333E-02,4.575520833334E-02));-#5597 = CARTESIAN_POINT('',(3.837239583333E-02,4.935546875E-02));-#5598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5599 = ORIENTED_EDGE('',*,*,#5600,.T.);-#5600 = EDGE_CURVE('',#5585,#5601,#5603,.T.);-#5601 = VERTEX_POINT('',#5602);-#5602 = CARTESIAN_POINT('',(-4.926432291667E-02,2.59765625E-02,0.9350001- ));-#5603 = SURFACE_CURVE('',#5604,(#5608),.PCURVE_S1.);-#5604 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5605,#5606,#5607),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5605 = CARTESIAN_POINT('',(-4.591471354167E-02,1.704427083333E-02,- 0.9350001));-#5606 = CARTESIAN_POINT('',(-4.591471354167E-02,2.274088541667E-02,- 0.9350001));-#5607 = CARTESIAN_POINT('',(-4.926432291667E-02,2.59765625E-02,0.9350001- ));-#5608 = PCURVE('',#5476,#5609);-#5609 = DEFINITIONAL_REPRESENTATION('',(#5610),#5614);-#5610 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5611,#5612,#5613),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5611 = CARTESIAN_POINT('',(3.837239583333E-02,4.935546875E-02));-#5612 = CARTESIAN_POINT('',(3.837239583333E-02,5.505208333334E-02));-#5613 = CARTESIAN_POINT('',(3.502278645833E-02,5.828776041667E-02));-#5614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5615 = ORIENTED_EDGE('',*,*,#5616,.T.);-#5616 = EDGE_CURVE('',#5601,#5617,#5619,.T.);-#5617 = VERTEX_POINT('',#5618);-#5618 = CARTESIAN_POINT('',(-5.8447265625E-02,2.921223958333E-02,- 0.9350001));-#5619 = SURFACE_CURVE('',#5620,(#5624),.PCURVE_S1.);-#5620 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5621,#5622,#5623),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5621 = CARTESIAN_POINT('',(-4.926432291667E-02,2.59765625E-02,0.9350001- ));-#5622 = CARTESIAN_POINT('',(-5.261393229167E-02,2.921223958333E-02,- 0.9350001));-#5623 = CARTESIAN_POINT('',(-5.8447265625E-02,2.921223958333E-02,- 0.9350001));-#5624 = PCURVE('',#5476,#5625);-#5625 = DEFINITIONAL_REPRESENTATION('',(#5626),#5630);-#5626 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5627,#5628,#5629),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5627 = CARTESIAN_POINT('',(3.502278645833E-02,5.828776041667E-02));-#5628 = CARTESIAN_POINT('',(3.167317708333E-02,6.15234375E-02));-#5629 = CARTESIAN_POINT('',(2.583984375E-02,6.15234375E-02));-#5630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5631 = ORIENTED_EDGE('',*,*,#5632,.T.);-#5632 = EDGE_CURVE('',#5617,#5633,#5635,.T.);-#5633 = VERTEX_POINT('',#5634);-#5634 = CARTESIAN_POINT('',(-6.715169270833E-02,2.770833333333E-02,- 0.9350001));-#5635 = SURFACE_CURVE('',#5636,(#5640),.PCURVE_S1.);-#5636 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5637,#5638,#5639),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5637 = CARTESIAN_POINT('',(-5.8447265625E-02,2.921223958333E-02,- 0.9350001));-#5638 = CARTESIAN_POINT('',(-6.259440104167E-02,2.921223958333E-02,- 0.9350001));-#5639 = CARTESIAN_POINT('',(-6.715169270833E-02,2.770833333333E-02,- 0.9350001));-#5640 = PCURVE('',#5476,#5641);-#5641 = DEFINITIONAL_REPRESENTATION('',(#5642),#5646);-#5642 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5643,#5644,#5645),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5643 = CARTESIAN_POINT('',(2.583984375E-02,6.15234375E-02));-#5644 = CARTESIAN_POINT('',(2.169270833333E-02,6.15234375E-02));-#5645 = CARTESIAN_POINT('',(1.713541666667E-02,6.001953125E-02));-#5646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5647 = ORIENTED_EDGE('',*,*,#5648,.T.);-#5648 = EDGE_CURVE('',#5633,#5649,#5651,.T.);-#5649 = VERTEX_POINT('',#5650);-#5650 = CARTESIAN_POINT('',(-7.681315104167E-02,2.315104166667E-02,- 0.9350001));-#5651 = SURFACE_CURVE('',#5652,(#5656),.PCURVE_S1.);-#5652 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5653,#5654,#5655),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5653 = CARTESIAN_POINT('',(-6.715169270833E-02,2.770833333333E-02,- 0.9350001));-#5654 = CARTESIAN_POINT('',(-7.1708984375E-02,2.620442708333E-02,- 0.9350001));-#5655 = CARTESIAN_POINT('',(-7.681315104167E-02,2.315104166667E-02,- 0.9350001));-#5656 = PCURVE('',#5476,#5657);-#5657 = DEFINITIONAL_REPRESENTATION('',(#5658),#5662);-#5658 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5659,#5660,#5661),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5659 = CARTESIAN_POINT('',(1.713541666667E-02,6.001953125E-02));-#5660 = CARTESIAN_POINT('',(1.2578125E-02,5.8515625E-02));-#5661 = CARTESIAN_POINT('',(7.47395833333E-03,5.546223958334E-02));-#5662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5663 = ORIENTED_EDGE('',*,*,#5664,.T.);-#5664 = EDGE_CURVE('',#5649,#5665,#5667,.T.);-#5665 = VERTEX_POINT('',#5666);-#5666 = CARTESIAN_POINT('',(-7.681315104167E-02,3.244791666667E-02,- 0.9350001));-#5667 = SURFACE_CURVE('',#5668,(#5672),.PCURVE_S1.);-#5668 = LINE('',#5669,#5670);-#5669 = CARTESIAN_POINT('',(-7.681315104167E-02,2.315104166667E-02,- 0.9350001));-#5670 = VECTOR('',#5671,1.);-#5671 = DIRECTION('',(0.,1.,0.));-#5672 = PCURVE('',#5476,#5673);-#5673 = DEFINITIONAL_REPRESENTATION('',(#5674),#5678);-#5674 = LINE('',#5675,#5676);-#5675 = CARTESIAN_POINT('',(7.47395833333E-03,5.546223958334E-02));-#5676 = VECTOR('',#5677,1.);-#5677 = DIRECTION('',(0.,1.));-#5678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5679 = ORIENTED_EDGE('',*,*,#5680,.T.);-#5680 = EDGE_CURVE('',#5665,#5681,#5683,.T.);-#5681 = VERTEX_POINT('',#5682);-#5682 = CARTESIAN_POINT('',(-6.758463541667E-02,3.58203125E-02,0.9350001- ));-#5683 = SURFACE_CURVE('',#5684,(#5688),.PCURVE_S1.);-#5684 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5685,#5686,#5687),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5685 = CARTESIAN_POINT('',(-7.681315104167E-02,3.244791666667E-02,- 0.9350001));-#5686 = CARTESIAN_POINT('',(-7.2119140625E-02,3.468098958333E-02,- 0.9350001));-#5687 = CARTESIAN_POINT('',(-6.758463541667E-02,3.58203125E-02,0.9350001- ));-#5688 = PCURVE('',#5476,#5689);-#5689 = DEFINITIONAL_REPRESENTATION('',(#5690),#5694);-#5690 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5691,#5692,#5693),+#5471 = CARTESIAN_POINT('',(-7.496745541341E-03,0.635230895815,+ 0.59710515));+#5472 = CARTESIAN_POINT('',(-3.623047237305E-03,0.6376690471,0.59710515)+ );+#5473 = CARTESIAN_POINT('',(1.389974097331E-03,0.6376690471,0.59710515)+ );+#5474 = PCURVE('',#5374,#5475);+#5475 = DEFINITIONAL_REPRESENTATION('',(#5476),#5480);+#5476 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5477,#5478,#5479), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5691 = CARTESIAN_POINT('',(7.47395833333E-03,6.475911458334E-02));-#5692 = CARTESIAN_POINT('',(1.216796875E-02,6.69921875E-02));-#5693 = CARTESIAN_POINT('',(1.670247395833E-02,6.813151041667E-02));-#5694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5477 = CARTESIAN_POINT('',(2.059896039323E-02,4.2542321963E-02));+#5478 = CARTESIAN_POINT('',(2.447265869727E-02,4.4980473248E-02));+#5479 = CARTESIAN_POINT('',(2.94856800319E-02,4.4980473248E-02));+#5480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5695 = ORIENTED_EDGE('',*,*,#5696,.T.);-#5696 = EDGE_CURVE('',#5681,#5697,#5699,.T.);-#5697 = VERTEX_POINT('',#5698);-#5698 = CARTESIAN_POINT('',(-5.862955729167E-02,3.695963541667E-02,- 0.9350001));-#5699 = SURFACE_CURVE('',#5700,(#5704),.PCURVE_S1.);-#5700 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5701,#5702,#5703),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5701 = CARTESIAN_POINT('',(-6.758463541667E-02,3.58203125E-02,0.9350001+#5481 = ORIENTED_EDGE('',*,*,#5482,.T.);+#5482 = EDGE_CURVE('',#5467,#5483,#5485,.T.);+#5483 = VERTEX_POINT('',#5484);+#5484 = CARTESIAN_POINT('',(1.663411624674E-02,0.631630635038,0.59710515 ));-#5702 = CARTESIAN_POINT('',(-6.305013020833E-02,3.695963541667E-02,- 0.9350001));-#5703 = CARTESIAN_POINT('',(-5.862955729167E-02,3.695963541667E-02,- 0.9350001));-#5704 = PCURVE('',#5476,#5705);-#5705 = DEFINITIONAL_REPRESENTATION('',(#5706),#5710);-#5706 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5707,#5708,#5709),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5707 = CARTESIAN_POINT('',(1.670247395833E-02,6.813151041667E-02));-#5708 = CARTESIAN_POINT('',(2.123697916667E-02,6.927083333334E-02));-#5709 = CARTESIAN_POINT('',(2.565755208333E-02,6.927083333334E-02));-#5710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5711 = ORIENTED_EDGE('',*,*,#5712,.T.);-#5712 = EDGE_CURVE('',#5697,#5713,#5715,.T.);-#5713 = VERTEX_POINT('',#5714);-#5714 = CARTESIAN_POINT('',(-4.256510416667E-02,3.1650390625E-02,- 0.9350001));-#5715 = SURFACE_CURVE('',#5716,(#5720),.PCURVE_S1.);-#5716 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5717,#5718,#5719),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5717 = CARTESIAN_POINT('',(-5.862955729167E-02,3.695963541667E-02,- 0.9350001));-#5718 = CARTESIAN_POINT('',(-4.864908854167E-02,3.695963541667E-02,- 0.9350001));-#5719 = CARTESIAN_POINT('',(-4.256510416667E-02,3.1650390625E-02,- 0.9350001));-#5720 = PCURVE('',#5476,#5721);-#5721 = DEFINITIONAL_REPRESENTATION('',(#5722),#5726);-#5722 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5723,#5724,#5725),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5723 = CARTESIAN_POINT('',(2.565755208333E-02,6.927083333334E-02));-#5724 = CARTESIAN_POINT('',(3.563802083333E-02,6.927083333334E-02));-#5725 = CARTESIAN_POINT('',(4.172200520833E-02,6.396158854167E-02));-#5726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5727 = ORIENTED_EDGE('',*,*,#5728,.T.);-#5728 = EDGE_CURVE('',#5713,#5729,#5731,.T.);-#5729 = VERTEX_POINT('',#5730);-#5730 = CARTESIAN_POINT('',(-3.648111979167E-02,1.772786458333E-02,- 0.9350001));-#5731 = SURFACE_CURVE('',#5732,(#5736),.PCURVE_S1.);-#5732 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5733,#5734,#5735),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5733 = CARTESIAN_POINT('',(-4.256510416667E-02,3.1650390625E-02,- 0.9350001));-#5734 = CARTESIAN_POINT('',(-3.648111979167E-02,2.634114583333E-02,- 0.9350001));-#5735 = CARTESIAN_POINT('',(-3.648111979167E-02,1.772786458333E-02,- 0.9350001));-#5736 = PCURVE('',#5476,#5737);-#5737 = DEFINITIONAL_REPRESENTATION('',(#5738),#5742);-#5738 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5739,#5740,#5741),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5739 = CARTESIAN_POINT('',(4.172200520833E-02,6.396158854167E-02));-#5740 = CARTESIAN_POINT('',(4.780598958333E-02,5.865234375E-02));-#5741 = CARTESIAN_POINT('',(4.780598958333E-02,5.00390625E-02));-#5742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5743 = ORIENTED_EDGE('',*,*,#5744,.T.);-#5744 = EDGE_CURVE('',#5729,#5745,#5747,.T.);-#5745 = VERTEX_POINT('',#5746);-#5746 = CARTESIAN_POINT('',(-3.850911458333E-02,8.977864583333E-03,- 0.9350001));-#5747 = SURFACE_CURVE('',#5748,(#5752),.PCURVE_S1.);-#5748 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5749,#5750,#5751),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5749 = CARTESIAN_POINT('',(-3.648111979167E-02,1.772786458333E-02,- 0.9350001));-#5750 = CARTESIAN_POINT('',(-3.648111979167E-02,1.335286458333E-02,- 0.9350001));-#5751 = CARTESIAN_POINT('',(-3.850911458333E-02,8.977864583333E-03,- 0.9350001));-#5752 = PCURVE('',#5476,#5753);-#5753 = DEFINITIONAL_REPRESENTATION('',(#5754),#5758);-#5754 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5755,#5756,#5757),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5755 = CARTESIAN_POINT('',(4.780598958333E-02,5.00390625E-02));-#5756 = CARTESIAN_POINT('',(4.780598958333E-02,4.56640625E-02));-#5757 = CARTESIAN_POINT('',(4.577799479167E-02,4.12890625E-02));-#5758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5759 = ORIENTED_EDGE('',*,*,#5760,.T.);-#5760 = EDGE_CURVE('',#5745,#5761,#5763,.T.);-#5761 = VERTEX_POINT('',#5762);-#5762 = CARTESIAN_POINT('',(-4.509440104167E-02,-6.8359375E-04,0.9350001- ));-#5763 = SURFACE_CURVE('',#5764,(#5768),.PCURVE_S1.);-#5764 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5765,#5766,#5767),+#5485 = SURFACE_CURVE('',#5486,(#5490),.PCURVE_S1.);+#5486 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5487,#5488,#5489), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5765 = CARTESIAN_POINT('',(-3.850911458333E-02,8.977864583333E-03,- 0.9350001));-#5766 = CARTESIAN_POINT('',(-4.0537109375E-02,4.602864583333E-03,- 0.9350001));-#5767 = CARTESIAN_POINT('',(-4.509440104167E-02,-6.8359375E-04,0.9350001+#5487 = CARTESIAN_POINT('',(1.389974097331E-03,0.6376690471,0.59710515)+ );+#5488 = CARTESIAN_POINT('',(1.123372508171E-02,0.6376690471,0.59710515)+ );+#5489 = CARTESIAN_POINT('',(1.663411624674E-02,0.631630635038,0.59710515 ));-#5768 = PCURVE('',#5476,#5769);-#5769 = DEFINITIONAL_REPRESENTATION('',(#5770),#5774);-#5770 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5771,#5772,#5773),+#5490 = PCURVE('',#5374,#5491);+#5491 = DEFINITIONAL_REPRESENTATION('',(#5492),#5496);+#5492 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5493,#5494,#5495), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5771 = CARTESIAN_POINT('',(4.577799479167E-02,4.12890625E-02));-#5772 = CARTESIAN_POINT('',(4.375E-02,3.69140625E-02));-#5773 = CARTESIAN_POINT('',(3.919270833333E-02,3.162760416667E-02));-#5774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5493 = CARTESIAN_POINT('',(2.94856800319E-02,4.4980473248E-02));+#5494 = CARTESIAN_POINT('',(3.932943101628E-02,4.4980473248E-02));+#5495 = CARTESIAN_POINT('',(4.472982218131E-02,3.8942061186E-02));+#5496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5775 = ORIENTED_EDGE('',*,*,#5776,.T.);-#5776 = EDGE_CURVE('',#5761,#5777,#5779,.T.);-#5777 = VERTEX_POINT('',#5778);-#5778 = CARTESIAN_POINT('',(-5.25E-02,-8.88671875E-03,0.9350001));-#5779 = SURFACE_CURVE('',#5780,(#5784),.PCURVE_S1.);-#5780 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5781,#5782,#5783),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5781 = CARTESIAN_POINT('',(-4.509440104167E-02,-6.8359375E-04,0.9350001- ));-#5782 = CARTESIAN_POINT('',(-4.7646484375E-02,-3.645833333333E-03,- 0.9350001));-#5783 = CARTESIAN_POINT('',(-5.25E-02,-8.88671875E-03,0.9350001));-#5784 = PCURVE('',#5476,#5785);-#5785 = DEFINITIONAL_REPRESENTATION('',(#5786),#5790);-#5786 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5787,#5788,#5789),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5787 = CARTESIAN_POINT('',(3.919270833333E-02,3.162760416667E-02));-#5788 = CARTESIAN_POINT('',(3.6640625E-02,2.866536458334E-02));-#5789 = CARTESIAN_POINT('',(3.1787109375E-02,2.342447916667E-02));-#5790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5791 = ORIENTED_EDGE('',*,*,#5792,.T.);-#5792 = EDGE_CURVE('',#5777,#5466,#5793,.T.);-#5793 = SURFACE_CURVE('',#5794,(#5798),.PCURVE_S1.);-#5794 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5795,#5796,#5797),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5795 = CARTESIAN_POINT('',(-5.25E-02,-8.88671875E-03,0.9350001));-#5796 = CARTESIAN_POINT('',(-5.7353515625E-02,-1.412760416667E-02,- 0.9350001));-#5797 = CARTESIAN_POINT('',(-6.728841145833E-02,-2.456380208333E-02,- 0.9350001));-#5798 = PCURVE('',#5476,#5799);-#5799 = DEFINITIONAL_REPRESENTATION('',(#5800),#5804);-#5800 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5801,#5802,#5803),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5801 = CARTESIAN_POINT('',(3.1787109375E-02,2.342447916667E-02));-#5802 = CARTESIAN_POINT('',(2.693359375E-02,1.818359375E-02));-#5803 = CARTESIAN_POINT('',(1.699869791667E-02,7.74739583334E-03));-#5804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5805 = SHELL_BASED_SURFACE_MODEL('',(#5806));-#5806 = OPEN_SHELL('',(#5807));-#5807 = ADVANCED_FACE('',(#5808,#6087),#5822,.T.);-#5808 = FACE_BOUND('',#5809,.F.);-#5809 = EDGE_LOOP('',(#5810,#5833,#5849,#5865,#5881,#5897,#5913,#5929,- #5945,#5961,#5977,#5993,#6009,#6025,#6041,#6057,#6073));-#5810 = ORIENTED_EDGE('',*,*,#5811,.T.);-#5811 = EDGE_CURVE('',#5812,#5814,#5816,.T.);-#5812 = VERTEX_POINT('',#5813);-#5813 = CARTESIAN_POINT('',(1.706705729167E-02,3.422526041667E-02,- 0.9350001));-#5814 = VERTEX_POINT('',#5815);-#5815 = CARTESIAN_POINT('',(1.706705729167E-02,2.574869791667E-02,- 0.9350001));-#5816 = SURFACE_CURVE('',#5817,(#5821),.PCURVE_S1.);-#5817 = LINE('',#5818,#5819);-#5818 = CARTESIAN_POINT('',(1.706705729167E-02,3.422526041667E-02,- 0.9350001));-#5819 = VECTOR('',#5820,1.);-#5820 = DIRECTION('',(0.,-1.,0.));-#5821 = PCURVE('',#5822,#5827);-#5822 = PLANE('',#5823);-#5823 = AXIS2_PLACEMENT_3D('',#5824,#5825,#5826);-#5824 = CARTESIAN_POINT('',(-2.8095703125E-02,-3.231119791667E-02,- 0.9350001));-#5825 = DIRECTION('',(0.,0.,1.));-#5826 = DIRECTION('',(1.,0.,-0.));-#5827 = DEFINITIONAL_REPRESENTATION('',(#5828),#5832);-#5828 = LINE('',#5829,#5830);-#5829 = CARTESIAN_POINT('',(4.516276041667E-02,6.653645833334E-02));-#5830 = VECTOR('',#5831,1.);-#5831 = DIRECTION('',(0.,-1.));-#5832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5833 = ORIENTED_EDGE('',*,*,#5834,.T.);-#5834 = EDGE_CURVE('',#5814,#5835,#5837,.T.);-#5835 = VERTEX_POINT('',#5836);-#5836 = CARTESIAN_POINT('',(1.096028645833E-02,2.832356770833E-02,- 0.9350001));-#5837 = SURFACE_CURVE('',#5838,(#5842),.PCURVE_S1.);-#5838 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5839,#5840,#5841),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5839 = CARTESIAN_POINT('',(1.706705729167E-02,2.574869791667E-02,- 0.9350001));-#5840 = CARTESIAN_POINT('',(1.419596354167E-02,2.743489583333E-02,- 0.9350001));-#5841 = CARTESIAN_POINT('',(1.096028645833E-02,2.832356770833E-02,- 0.9350001));-#5842 = PCURVE('',#5822,#5843);-#5843 = DEFINITIONAL_REPRESENTATION('',(#5844),#5848);-#5844 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5845,#5846,#5847),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5845 = CARTESIAN_POINT('',(4.516276041667E-02,5.805989583334E-02));-#5846 = CARTESIAN_POINT('',(4.229166666667E-02,5.974609375E-02));-#5847 = CARTESIAN_POINT('',(3.905598958333E-02,6.0634765625E-02));-#5848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5849 = ORIENTED_EDGE('',*,*,#5850,.T.);-#5850 = EDGE_CURVE('',#5835,#5851,#5853,.T.);-#5851 = VERTEX_POINT('',#5852);-#5852 = CARTESIAN_POINT('',(4.215494791667E-03,2.921223958333E-02,- 0.9350001));-#5853 = SURFACE_CURVE('',#5854,(#5858),.PCURVE_S1.);-#5854 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5855,#5856,#5857),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5855 = CARTESIAN_POINT('',(1.096028645833E-02,2.832356770833E-02,- 0.9350001));-#5856 = CARTESIAN_POINT('',(7.724609375E-03,2.921223958333E-02,0.9350001- ));-#5857 = CARTESIAN_POINT('',(4.215494791667E-03,2.921223958333E-02,- 0.9350001));-#5858 = PCURVE('',#5822,#5859);-#5859 = DEFINITIONAL_REPRESENTATION('',(#5860),#5864);-#5860 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5861,#5862,#5863),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5861 = CARTESIAN_POINT('',(3.905598958333E-02,6.0634765625E-02));-#5862 = CARTESIAN_POINT('',(3.58203125E-02,6.15234375E-02));-#5863 = CARTESIAN_POINT('',(3.231119791667E-02,6.15234375E-02));-#5864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5865 = ORIENTED_EDGE('',*,*,#5866,.T.);-#5866 = EDGE_CURVE('',#5851,#5867,#5869,.T.);-#5867 = VERTEX_POINT('',#5868);-#5868 = CARTESIAN_POINT('',(-9.046223958333E-03,2.2626953125E-02,- 0.9350001));-#5869 = SURFACE_CURVE('',#5870,(#5874),.PCURVE_S1.);-#5870 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5871,#5872,#5873),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5871 = CARTESIAN_POINT('',(4.215494791667E-03,2.921223958333E-02,- 0.9350001));-#5872 = CARTESIAN_POINT('',(-4.534505208333E-03,2.921223958333E-02,- 0.9350001));-#5873 = CARTESIAN_POINT('',(-9.046223958333E-03,2.2626953125E-02,- 0.9350001));-#5874 = PCURVE('',#5822,#5875);-#5875 = DEFINITIONAL_REPRESENTATION('',(#5876),#5880);-#5876 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5877,#5878,#5879),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5877 = CARTESIAN_POINT('',(3.231119791667E-02,6.15234375E-02));-#5878 = CARTESIAN_POINT('',(2.356119791667E-02,6.15234375E-02));-#5879 = CARTESIAN_POINT('',(1.904947916667E-02,5.493815104167E-02));-#5880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5881 = ORIENTED_EDGE('',*,*,#5882,.T.);-#5882 = EDGE_CURVE('',#5867,#5883,#5885,.T.);-#5883 = VERTEX_POINT('',#5884);-#5884 = CARTESIAN_POINT('',(-1.355794270833E-02,3.235677083333E-03,- 0.9350001));-#5885 = SURFACE_CURVE('',#5886,(#5890),.PCURVE_S1.);-#5886 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5887,#5888,#5889),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5887 = CARTESIAN_POINT('',(-9.046223958333E-03,2.2626953125E-02,- 0.9350001));-#5888 = CARTESIAN_POINT('',(-1.355794270833E-02,1.604166666667E-02,- 0.9350001));-#5889 = CARTESIAN_POINT('',(-1.355794270833E-02,3.235677083333E-03,- 0.9350001));-#5890 = PCURVE('',#5822,#5891);-#5891 = DEFINITIONAL_REPRESENTATION('',(#5892),#5896);-#5892 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5893,#5894,#5895),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5893 = CARTESIAN_POINT('',(1.904947916667E-02,5.493815104167E-02));-#5894 = CARTESIAN_POINT('',(1.453776041667E-02,4.835286458334E-02));-#5895 = CARTESIAN_POINT('',(1.453776041667E-02,3.5546875E-02));-#5896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5897 = ORIENTED_EDGE('',*,*,#5898,.T.);-#5898 = EDGE_CURVE('',#5883,#5899,#5901,.T.);-#5899 = VERTEX_POINT('',#5900);-#5900 = CARTESIAN_POINT('',(-7.496744791667E-03,1.023111979167E-02,- 0.9350001));-#5901 = SURFACE_CURVE('',#5902,(#5906),.PCURVE_S1.);-#5902 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5903,#5904,#5905),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5903 = CARTESIAN_POINT('',(-1.355794270833E-02,3.235677083333E-03,- 0.9350001));-#5904 = CARTESIAN_POINT('',(-1.137044270833E-02,7.79296875E-03,0.9350001+#5497 = ORIENTED_EDGE('',*,*,#5498,.T.);+#5498 = EDGE_CURVE('',#5483,#5499,#5501,.T.);+#5499 = VERTEX_POINT('',#5500);+#5500 = CARTESIAN_POINT('',(2.203450741178E-02,0.614518003118,0.59710515 ));-#5905 = CARTESIAN_POINT('',(-7.496744791667E-03,1.023111979167E-02,- 0.9350001));-#5906 = PCURVE('',#5822,#5907);-#5907 = DEFINITIONAL_REPRESENTATION('',(#5908),#5912);-#5908 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5909,#5910,#5911),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5909 = CARTESIAN_POINT('',(1.453776041667E-02,3.5546875E-02));-#5910 = CARTESIAN_POINT('',(1.672526041667E-02,4.010416666667E-02));-#5911 = CARTESIAN_POINT('',(2.059895833333E-02,4.254231770834E-02));-#5912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5913 = ORIENTED_EDGE('',*,*,#5914,.T.);-#5914 = EDGE_CURVE('',#5899,#5915,#5917,.T.);-#5915 = VERTEX_POINT('',#5916);-#5916 = CARTESIAN_POINT('',(1.389973958333E-03,1.266927083333E-02,- 0.9350001));-#5917 = SURFACE_CURVE('',#5918,(#5922),.PCURVE_S1.);-#5918 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5919,#5920,#5921),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5919 = CARTESIAN_POINT('',(-7.496744791667E-03,1.023111979167E-02,- 0.9350001));-#5920 = CARTESIAN_POINT('',(-3.623046875E-03,1.266927083333E-02,- 0.9350001));-#5921 = CARTESIAN_POINT('',(1.389973958333E-03,1.266927083333E-02,- 0.9350001));-#5922 = PCURVE('',#5822,#5923);-#5923 = DEFINITIONAL_REPRESENTATION('',(#5924),#5928);-#5924 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5925,#5926,#5927),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5925 = CARTESIAN_POINT('',(2.059895833333E-02,4.254231770834E-02));-#5926 = CARTESIAN_POINT('',(2.447265625E-02,4.498046875E-02));-#5927 = CARTESIAN_POINT('',(2.948567708333E-02,4.498046875E-02));-#5928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5929 = ORIENTED_EDGE('',*,*,#5930,.T.);-#5930 = EDGE_CURVE('',#5915,#5931,#5933,.T.);-#5931 = VERTEX_POINT('',#5932);-#5932 = CARTESIAN_POINT('',(1.663411458333E-02,6.630859375E-03,0.9350001- ));-#5933 = SURFACE_CURVE('',#5934,(#5938),.PCURVE_S1.);-#5934 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5935,#5936,#5937),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5935 = CARTESIAN_POINT('',(1.389973958333E-03,1.266927083333E-02,- 0.9350001));-#5936 = CARTESIAN_POINT('',(1.123372395833E-02,1.266927083333E-02,- 0.9350001));-#5937 = CARTESIAN_POINT('',(1.663411458333E-02,6.630859375E-03,0.9350001- ));-#5938 = PCURVE('',#5822,#5939);-#5939 = DEFINITIONAL_REPRESENTATION('',(#5940),#5944);-#5940 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5941,#5942,#5943),+#5501 = SURFACE_CURVE('',#5502,(#5506),.PCURVE_S1.);+#5502 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5503,#5504,#5505), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5941 = CARTESIAN_POINT('',(2.948567708333E-02,4.498046875E-02));-#5942 = CARTESIAN_POINT('',(3.932942708333E-02,4.498046875E-02));-#5943 = CARTESIAN_POINT('',(4.472981770833E-02,3.894205729167E-02));-#5944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5945 = ORIENTED_EDGE('',*,*,#5946,.T.);-#5946 = EDGE_CURVE('',#5931,#5947,#5949,.T.);-#5947 = VERTEX_POINT('',#5948);-#5948 = CARTESIAN_POINT('',(2.203450520833E-02,-1.048177083333E-02,- 0.9350001));-#5949 = SURFACE_CURVE('',#5950,(#5954),.PCURVE_S1.);-#5950 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5951,#5952,#5953),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5951 = CARTESIAN_POINT('',(1.663411458333E-02,6.630859375E-03,0.9350001+#5503 = CARTESIAN_POINT('',(1.663411624674E-02,0.631630635038,0.59710515 ));-#5952 = CARTESIAN_POINT('',(2.203450520833E-02,5.924479166667E-04,- 0.9350001));-#5953 = CARTESIAN_POINT('',(2.203450520833E-02,-1.048177083333E-02,- 0.9350001));-#5954 = PCURVE('',#5822,#5955);-#5955 = DEFINITIONAL_REPRESENTATION('',(#5956),#5960);-#5956 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5957,#5958,#5959),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5957 = CARTESIAN_POINT('',(4.472981770833E-02,3.894205729167E-02));-#5958 = CARTESIAN_POINT('',(5.013020833333E-02,3.290364583334E-02));-#5959 = CARTESIAN_POINT('',(5.013020833333E-02,2.182942708334E-02));-#5960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5961 = ORIENTED_EDGE('',*,*,#5962,.T.);-#5962 = EDGE_CURVE('',#5947,#5963,#5965,.T.);-#5963 = VERTEX_POINT('',#5964);-#5964 = CARTESIAN_POINT('',(1.6474609375E-02,-2.757161458333E-02,- 0.9350001));-#5965 = SURFACE_CURVE('',#5966,(#5970),.PCURVE_S1.);-#5966 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5967,#5968,#5969),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5967 = CARTESIAN_POINT('',(2.203450520833E-02,-1.048177083333E-02,- 0.9350001));-#5968 = CARTESIAN_POINT('',(2.203450520833E-02,-2.151041666667E-02,- 0.9350001));-#5969 = CARTESIAN_POINT('',(1.6474609375E-02,-2.757161458333E-02,- 0.9350001));-#5970 = PCURVE('',#5822,#5971);-#5971 = DEFINITIONAL_REPRESENTATION('',(#5972),#5976);-#5972 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5973,#5974,#5975),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5973 = CARTESIAN_POINT('',(5.013020833333E-02,2.182942708334E-02));-#5974 = CARTESIAN_POINT('',(5.013020833333E-02,1.080078125E-02));-#5975 = CARTESIAN_POINT('',(4.45703125E-02,4.73958333334E-03));-#5976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5977 = ORIENTED_EDGE('',*,*,#5978,.T.);-#5978 = EDGE_CURVE('',#5963,#5979,#5981,.T.);-#5979 = VERTEX_POINT('',#5980);-#5980 = CARTESIAN_POINT('',(8.430989583333E-04,-3.36328125E-02,0.9350001- ));-#5981 = SURFACE_CURVE('',#5982,(#5986),.PCURVE_S1.);-#5982 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5983,#5984,#5985),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5983 = CARTESIAN_POINT('',(1.6474609375E-02,-2.757161458333E-02,- 0.9350001));-#5984 = CARTESIAN_POINT('',(1.091471354167E-02,-3.36328125E-02,0.9350001+#5504 = CARTESIAN_POINT('',(2.203450741178E-02,0.625592222976,0.59710515 ));-#5985 = CARTESIAN_POINT('',(8.430989583333E-04,-3.36328125E-02,0.9350001+#5505 = CARTESIAN_POINT('',(2.203450741178E-02,0.614518003118,0.59710515 ));-#5986 = PCURVE('',#5822,#5987);-#5987 = DEFINITIONAL_REPRESENTATION('',(#5988),#5992);-#5988 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5989,#5990,#5991),+#5506 = PCURVE('',#5374,#5507);+#5507 = DEFINITIONAL_REPRESENTATION('',(#5508),#5512);+#5508 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5509,#5510,#5511), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5989 = CARTESIAN_POINT('',(4.45703125E-02,4.73958333334E-03));-#5990 = CARTESIAN_POINT('',(3.901041666667E-02,-1.32161458333E-03));-#5991 = CARTESIAN_POINT('',(2.893880208333E-02,-1.32161458333E-03));-#5992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5509 = CARTESIAN_POINT('',(4.472982218131E-02,3.8942061186E-02));+#5510 = CARTESIAN_POINT('',(5.013021334635E-02,3.2903649124E-02));+#5511 = CARTESIAN_POINT('',(5.013021334635E-02,2.1829429266E-02));+#5512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5993 = ORIENTED_EDGE('',*,*,#5994,.T.);-#5994 = EDGE_CURVE('',#5979,#5995,#5997,.T.);-#5995 = VERTEX_POINT('',#5996);-#5996 = CARTESIAN_POINT('',(-1.652018229167E-02,-2.513346354167E-02,- 0.9350001));-#5997 = SURFACE_CURVE('',#5998,(#6002),.PCURVE_S1.);-#5998 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5999,#6000,#6001),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#5999 = CARTESIAN_POINT('',(8.430989583333E-04,-3.36328125E-02,0.9350001- ));-#6000 = CARTESIAN_POINT('',(-1.1005859375E-02,-3.36328125E-02,0.9350001)- );-#6001 = CARTESIAN_POINT('',(-1.652018229167E-02,-2.513346354167E-02,- 0.9350001));-#6002 = PCURVE('',#5822,#6003);-#6003 = DEFINITIONAL_REPRESENTATION('',(#6004),#6008);-#6004 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6005,#6006,#6007),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6005 = CARTESIAN_POINT('',(2.893880208333E-02,-1.32161458333E-03));-#6006 = CARTESIAN_POINT('',(1.708984375E-02,-1.32161458333E-03));-#6007 = CARTESIAN_POINT('',(1.157552083333E-02,7.177734375E-03));-#6008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6009 = ORIENTED_EDGE('',*,*,#6010,.T.);-#6010 = EDGE_CURVE('',#5995,#6011,#6013,.T.);-#6011 = VERTEX_POINT('',#6012);-#6012 = CARTESIAN_POINT('',(-2.203450520833E-02,1.640625E-03,0.9350001)- );-#6013 = SURFACE_CURVE('',#6014,(#6018),.PCURVE_S1.);-#6014 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6015,#6016,#6017),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6015 = CARTESIAN_POINT('',(-1.652018229167E-02,-2.513346354167E-02,- 0.9350001));-#6016 = CARTESIAN_POINT('',(-2.203450520833E-02,-1.663411458333E-02,- 0.9350001));-#6017 = CARTESIAN_POINT('',(-2.203450520833E-02,1.640625E-03,0.9350001)+#5513 = ORIENTED_EDGE('',*,*,#5514,.T.);+#5514 = EDGE_CURVE('',#5499,#5515,#5517,.T.);+#5515 = VERTEX_POINT('',#5516);+#5516 = CARTESIAN_POINT('',(1.647461102246E-02,0.59742815766,0.59710515) );-#6018 = PCURVE('',#5822,#6019);-#6019 = DEFINITIONAL_REPRESENTATION('',(#6020),#6024);-#6020 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6021,#6022,#6023),+#5517 = SURFACE_CURVE('',#5518,(#5522),.PCURVE_S1.);+#5518 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5519,#5520,#5521), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6021 = CARTESIAN_POINT('',(1.157552083333E-02,7.177734375E-03));-#6022 = CARTESIAN_POINT('',(6.06119791667E-03,1.567708333334E-02));-#6023 = CARTESIAN_POINT('',(6.06119791667E-03,3.395182291667E-02));-#6024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6025 = ORIENTED_EDGE('',*,*,#6026,.T.);-#6026 = EDGE_CURVE('',#6011,#6027,#6029,.T.);-#6027 = VERTEX_POINT('',#6028);-#6028 = CARTESIAN_POINT('',(-1.540364583333E-02,2.791341145833E-02,- 0.9350001));-#6029 = SURFACE_CURVE('',#6030,(#6034),.PCURVE_S1.);-#6030 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6031,#6032,#6033),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6031 = CARTESIAN_POINT('',(-2.203450520833E-02,1.640625E-03,0.9350001)- );-#6032 = CARTESIAN_POINT('',(-2.203450520833E-02,1.88671875E-02,0.9350001+#5519 = CARTESIAN_POINT('',(2.203450741178E-02,0.614518003118,0.59710515 ));-#6033 = CARTESIAN_POINT('',(-1.540364583333E-02,2.791341145833E-02,- 0.9350001));-#6034 = PCURVE('',#5822,#6035);-#6035 = DEFINITIONAL_REPRESENTATION('',(#6036),#6040);-#6036 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6037,#6038,#6039),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6037 = CARTESIAN_POINT('',(6.06119791667E-03,3.395182291667E-02));-#6038 = CARTESIAN_POINT('',(6.06119791667E-03,5.117838541667E-02));-#6039 = CARTESIAN_POINT('',(1.269205729167E-02,6.0224609375E-02));-#6040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6041 = ORIENTED_EDGE('',*,*,#6042,.T.);-#6042 = EDGE_CURVE('',#6027,#6043,#6045,.T.);-#6043 = VERTEX_POINT('',#6044);-#6044 = CARTESIAN_POINT('',(3.805338541667E-03,3.695963541667E-02,- 0.9350001));-#6045 = SURFACE_CURVE('',#6046,(#6050),.PCURVE_S1.);-#6046 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6047,#6048,#6049),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6047 = CARTESIAN_POINT('',(-1.540364583333E-02,2.791341145833E-02,- 0.9350001));-#6048 = CARTESIAN_POINT('',(-8.772786458333E-03,3.695963541667E-02,- 0.9350001));-#6049 = CARTESIAN_POINT('',(3.805338541667E-03,3.695963541667E-02,- 0.9350001));-#6050 = PCURVE('',#5822,#6051);-#6051 = DEFINITIONAL_REPRESENTATION('',(#6052),#6056);-#6052 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6053,#6054,#6055),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6053 = CARTESIAN_POINT('',(1.269205729167E-02,6.0224609375E-02));-#6054 = CARTESIAN_POINT('',(1.932291666667E-02,6.927083333334E-02));-#6055 = CARTESIAN_POINT('',(3.190104166667E-02,6.927083333334E-02));-#6056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6057 = ORIENTED_EDGE('',*,*,#6058,.T.);-#6058 = EDGE_CURVE('',#6043,#6059,#6061,.T.);-#6059 = VERTEX_POINT('',#6060);-#6060 = CARTESIAN_POINT('',(1.055013020833E-02,3.625325520833E-02,- 0.9350001));-#6061 = SURFACE_CURVE('',#6062,(#6066),.PCURVE_S1.);-#6062 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6063,#6064,#6065),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6063 = CARTESIAN_POINT('',(3.805338541667E-03,3.695963541667E-02,- 0.9350001));-#6064 = CARTESIAN_POINT('',(7.177734375E-03,3.695963541667E-02,0.9350001+#5520 = CARTESIAN_POINT('',(2.203450741178E-02,0.603489356182,0.59710515 ));-#6065 = CARTESIAN_POINT('',(1.055013020833E-02,3.625325520833E-02,- 0.9350001));-#6066 = PCURVE('',#5822,#6067);-#6067 = DEFINITIONAL_REPRESENTATION('',(#6068),#6072);-#6068 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6069,#6070,#6071),+#5521 = CARTESIAN_POINT('',(1.647461102246E-02,0.59742815766,0.59710515)+ );+#5522 = PCURVE('',#5374,#5523);+#5523 = DEFINITIONAL_REPRESENTATION('',(#5524),#5528);+#5524 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5525,#5526,#5527), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6069 = CARTESIAN_POINT('',(3.190104166667E-02,6.927083333334E-02));-#6070 = CARTESIAN_POINT('',(3.52734375E-02,6.927083333334E-02));-#6071 = CARTESIAN_POINT('',(3.864583333333E-02,6.8564453125E-02));-#6072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5525 = CARTESIAN_POINT('',(5.013021334635E-02,2.1829429266E-02));+#5526 = CARTESIAN_POINT('',(5.013021334635E-02,1.080078233E-02));+#5527 = CARTESIAN_POINT('',(4.457031695703E-02,4.739583808E-03));+#5528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6073 = ORIENTED_EDGE('',*,*,#6074,.T.);-#6074 = EDGE_CURVE('',#6059,#5812,#6075,.T.);-#6075 = SURFACE_CURVE('',#6076,(#6080),.PCURVE_S1.);-#6076 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6077,#6078,#6079),+#5529 = ORIENTED_EDGE('',*,*,#5530,.T.);+#5530 = EDGE_CURVE('',#5515,#5531,#5533,.T.);+#5531 = VERTEX_POINT('',#5532);+#5532 = CARTESIAN_POINT('',(8.430990426432E-04,0.591366959137,0.59710515+ ));+#5533 = SURFACE_CURVE('',#5534,(#5538),.PCURVE_S1.);+#5534 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5535,#5536,#5537), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6077 = CARTESIAN_POINT('',(1.055013020833E-02,3.625325520833E-02,- 0.9350001));-#6078 = CARTESIAN_POINT('',(1.392252604167E-02,3.5546875E-02,0.9350001)+#5535 = CARTESIAN_POINT('',(1.647461102246E-02,0.59742815766,0.59710515) );-#6079 = CARTESIAN_POINT('',(1.706705729167E-02,3.422526041667E-02,- 0.9350001));-#6080 = PCURVE('',#5822,#6081);-#6081 = DEFINITIONAL_REPRESENTATION('',(#6082),#6086);-#6082 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6083,#6084,#6085),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6083 = CARTESIAN_POINT('',(3.864583333333E-02,6.8564453125E-02));-#6084 = CARTESIAN_POINT('',(4.201822916667E-02,6.785807291667E-02));-#6085 = CARTESIAN_POINT('',(4.516276041667E-02,6.653645833334E-02));-#6086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6087 = FACE_BOUND('',#6088,.F.);-#6088 = EDGE_LOOP('',(#6089,#6107,#6123,#6139,#6155,#6171,#6187,#6203));-#6089 = ORIENTED_EDGE('',*,*,#6090,.T.);-#6090 = EDGE_CURVE('',#6091,#6093,#6095,.T.);-#6091 = VERTEX_POINT('',#6092);-#6092 = CARTESIAN_POINT('',(6.608072916667E-04,5.46875E-03,0.9350001));-#6093 = VERTEX_POINT('',#6094);-#6094 = CARTESIAN_POINT('',(-8.590494791667E-03,1.23046875E-03,0.9350001+#5536 = CARTESIAN_POINT('',(1.091471463314E-02,0.591366959137,0.59710515 ));-#6095 = SURFACE_CURVE('',#6096,(#6100),.PCURVE_S1.);-#6096 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6097,#6098,#6099),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6097 = CARTESIAN_POINT('',(6.608072916667E-04,5.46875E-03,0.9350001));-#6098 = CARTESIAN_POINT('',(-5.218098958333E-03,5.46875E-03,0.9350001));-#6099 = CARTESIAN_POINT('',(-8.590494791667E-03,1.23046875E-03,0.9350001+#5537 = CARTESIAN_POINT('',(8.430990426432E-04,0.591366959137,0.59710515 ));-#6100 = PCURVE('',#5822,#6101);-#6101 = DEFINITIONAL_REPRESENTATION('',(#6102),#6106);-#6102 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6103,#6104,#6105),+#5538 = PCURVE('',#5374,#5539);+#5539 = DEFINITIONAL_REPRESENTATION('',(#5540),#5544);+#5540 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5541,#5542,#5543), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6103 = CARTESIAN_POINT('',(2.875651041667E-02,3.777994791667E-02));-#6104 = CARTESIAN_POINT('',(2.287760416667E-02,3.777994791667E-02));-#6105 = CARTESIAN_POINT('',(1.950520833333E-02,3.354166666667E-02));-#6106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5541 = CARTESIAN_POINT('',(4.457031695703E-02,4.739583808E-03));+#5542 = CARTESIAN_POINT('',(3.901042056771E-02,-1.321614715E-03));+#5543 = CARTESIAN_POINT('',(2.893880497721E-02,-1.321614715E-03));+#5544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6107 = ORIENTED_EDGE('',*,*,#6108,.T.);-#6108 = EDGE_CURVE('',#6093,#6109,#6111,.T.);-#6109 = VERTEX_POINT('',#6110);-#6110 = CARTESIAN_POINT('',(-1.1962890625E-02,-1.048177083333E-02,- 0.9350001));-#6111 = SURFACE_CURVE('',#6112,(#6116),.PCURVE_S1.);-#6112 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6113,#6114,#6115),+#5545 = ORIENTED_EDGE('',*,*,#5546,.T.);+#5546 = EDGE_CURVE('',#5531,#5547,#5549,.T.);+#5547 = VERTEX_POINT('',#5548);+#5548 = CARTESIAN_POINT('',(-1.652018394368E-02,0.599866308945,+ 0.59710515));+#5549 = SURFACE_CURVE('',#5550,(#5554),.PCURVE_S1.);+#5550 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5551,#5552,#5553), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6113 = CARTESIAN_POINT('',(-8.590494791667E-03,1.23046875E-03,0.9350001+#5551 = CARTESIAN_POINT('',(8.430990426432E-04,0.591366959137,0.59710515 ));-#6114 = CARTESIAN_POINT('',(-1.1962890625E-02,-3.0078125E-03,0.9350001)- );-#6115 = CARTESIAN_POINT('',(-1.1962890625E-02,-1.048177083333E-02,- 0.9350001));-#6116 = PCURVE('',#5822,#6117);-#6117 = DEFINITIONAL_REPRESENTATION('',(#6118),#6122);-#6118 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6119,#6120,#6121),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6119 = CARTESIAN_POINT('',(1.950520833333E-02,3.354166666667E-02));-#6120 = CARTESIAN_POINT('',(1.61328125E-02,2.930338541667E-02));-#6121 = CARTESIAN_POINT('',(1.61328125E-02,2.182942708334E-02));-#6122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6123 = ORIENTED_EDGE('',*,*,#6124,.T.);-#6124 = EDGE_CURVE('',#6109,#6125,#6127,.T.);-#6125 = VERTEX_POINT('',#6126);-#6126 = CARTESIAN_POINT('',(-8.590494791667E-03,-2.219401041667E-02,- 0.9350001));-#6127 = SURFACE_CURVE('',#6128,(#6132),.PCURVE_S1.);-#6128 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6129,#6130,#6131),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6129 = CARTESIAN_POINT('',(-1.1962890625E-02,-1.048177083333E-02,- 0.9350001));-#6130 = CARTESIAN_POINT('',(-1.1962890625E-02,-1.795572916667E-02,- 0.9350001));-#6131 = CARTESIAN_POINT('',(-8.590494791667E-03,-2.219401041667E-02,- 0.9350001));-#6132 = PCURVE('',#5822,#6133);-#6133 = DEFINITIONAL_REPRESENTATION('',(#6134),#6138);-#6134 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6135,#6136,#6137),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6135 = CARTESIAN_POINT('',(1.61328125E-02,2.182942708334E-02));-#6136 = CARTESIAN_POINT('',(1.61328125E-02,1.435546875E-02));-#6137 = CARTESIAN_POINT('',(1.950520833333E-02,1.01171875E-02));-#6138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6139 = ORIENTED_EDGE('',*,*,#6140,.T.);-#6140 = EDGE_CURVE('',#6125,#6141,#6143,.T.);-#6141 = VERTEX_POINT('',#6142);-#6142 = CARTESIAN_POINT('',(6.608072916667E-04,-2.643229166667E-02,- 0.9350001));-#6143 = SURFACE_CURVE('',#6144,(#6148),.PCURVE_S1.);-#6144 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6145,#6146,#6147),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6145 = CARTESIAN_POINT('',(-8.590494791667E-03,-2.219401041667E-02,- 0.9350001));-#6146 = CARTESIAN_POINT('',(-5.218098958333E-03,-2.643229166667E-02,- 0.9350001));-#6147 = CARTESIAN_POINT('',(6.608072916667E-04,-2.643229166667E-02,- 0.9350001));-#6148 = PCURVE('',#5822,#6149);-#6149 = DEFINITIONAL_REPRESENTATION('',(#6150),#6154);-#6150 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6151,#6152,#6153),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6151 = CARTESIAN_POINT('',(1.950520833333E-02,1.01171875E-02));-#6152 = CARTESIAN_POINT('',(2.287760416667E-02,5.87890625E-03));-#6153 = CARTESIAN_POINT('',(2.875651041667E-02,5.87890625E-03));-#6154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6155 = ORIENTED_EDGE('',*,*,#6156,.T.);-#6156 = EDGE_CURVE('',#6141,#6157,#6159,.T.);-#6157 = VERTEX_POINT('',#6158);-#6158 = CARTESIAN_POINT('',(9.866536458333E-03,-2.239908854167E-02,- 0.9350001));-#6159 = SURFACE_CURVE('',#6160,(#6164),.PCURVE_S1.);-#6160 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6161,#6162,#6163),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6161 = CARTESIAN_POINT('',(6.608072916667E-04,-2.643229166667E-02,- 0.9350001));-#6162 = CARTESIAN_POINT('',(6.767578125E-03,-2.643229166667E-02,- 0.9350001));-#6163 = CARTESIAN_POINT('',(9.866536458333E-03,-2.239908854167E-02,- 0.9350001));-#6164 = PCURVE('',#5822,#6165);-#6165 = DEFINITIONAL_REPRESENTATION('',(#6166),#6170);-#6166 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6167,#6168,#6169),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6167 = CARTESIAN_POINT('',(2.875651041667E-02,5.87890625E-03));-#6168 = CARTESIAN_POINT('',(3.486328125E-02,5.87890625E-03));-#6169 = CARTESIAN_POINT('',(3.796223958333E-02,9.912109375E-03));-#6170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6171 = ORIENTED_EDGE('',*,*,#6172,.T.);-#6172 = EDGE_CURVE('',#6157,#6173,#6175,.T.);-#6173 = VERTEX_POINT('',#6174);-#6174 = CARTESIAN_POINT('',(1.296549479167E-02,-1.048177083333E-02,- 0.9350001));-#6175 = SURFACE_CURVE('',#6176,(#6180),.PCURVE_S1.);-#6176 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6177,#6178,#6179),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6177 = CARTESIAN_POINT('',(9.866536458333E-03,-2.239908854167E-02,- 0.9350001));-#6178 = CARTESIAN_POINT('',(1.296549479167E-02,-1.836588541667E-02,- 0.9350001));-#6179 = CARTESIAN_POINT('',(1.296549479167E-02,-1.048177083333E-02,- 0.9350001));-#6180 = PCURVE('',#5822,#6181);-#6181 = DEFINITIONAL_REPRESENTATION('',(#6182),#6186);-#6182 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6183,#6184,#6185),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6183 = CARTESIAN_POINT('',(3.796223958333E-02,9.912109375E-03));-#6184 = CARTESIAN_POINT('',(4.106119791667E-02,1.39453125E-02));-#6185 = CARTESIAN_POINT('',(4.106119791667E-02,2.182942708334E-02));-#6186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6187 = ORIENTED_EDGE('',*,*,#6188,.T.);-#6188 = EDGE_CURVE('',#6173,#6189,#6191,.T.);-#6189 = VERTEX_POINT('',#6190);-#6190 = CARTESIAN_POINT('',(9.866536458333E-03,1.458333333333E-03,- 0.9350001));-#6191 = SURFACE_CURVE('',#6192,(#6196),.PCURVE_S1.);-#6192 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6193,#6194,#6195),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6193 = CARTESIAN_POINT('',(1.296549479167E-02,-1.048177083333E-02,- 0.9350001));-#6194 = CARTESIAN_POINT('',(1.296549479167E-02,-2.552083333333E-03,- 0.9350001));-#6195 = CARTESIAN_POINT('',(9.866536458333E-03,1.458333333333E-03,- 0.9350001));-#6196 = PCURVE('',#5822,#6197);-#6197 = DEFINITIONAL_REPRESENTATION('',(#6198),#6202);-#6198 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6199,#6200,#6201),+#5552 = CARTESIAN_POINT('',(-1.100586047559E-02,0.591366959137,+ 0.59710515));+#5553 = CARTESIAN_POINT('',(-1.652018394368E-02,0.599866308945,+ 0.59710515));+#5554 = PCURVE('',#5374,#5555);+#5555 = DEFINITIONAL_REPRESENTATION('',(#5556),#5560);+#5556 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5557,#5558,#5559), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6199 = CARTESIAN_POINT('',(4.106119791667E-02,2.182942708334E-02));-#6200 = CARTESIAN_POINT('',(4.106119791667E-02,2.975911458334E-02));-#6201 = CARTESIAN_POINT('',(3.796223958333E-02,3.376953125E-02));-#6202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6203 = ORIENTED_EDGE('',*,*,#6204,.T.);-#6204 = EDGE_CURVE('',#6189,#6091,#6205,.T.);-#6205 = SURFACE_CURVE('',#6206,(#6210),.PCURVE_S1.);-#6206 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6207,#6208,#6209),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6207 = CARTESIAN_POINT('',(9.866536458333E-03,1.458333333333E-03,- 0.9350001));-#6208 = CARTESIAN_POINT('',(6.767578125E-03,5.46875E-03,0.9350001));-#6209 = CARTESIAN_POINT('',(6.608072916667E-04,5.46875E-03,0.9350001));-#6210 = PCURVE('',#5822,#6211);-#6211 = DEFINITIONAL_REPRESENTATION('',(#6212),#6216);-#6212 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6213,#6214,#6215),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6213 = CARTESIAN_POINT('',(3.796223958333E-02,3.376953125E-02));-#6214 = CARTESIAN_POINT('',(3.486328125E-02,3.777994791667E-02));-#6215 = CARTESIAN_POINT('',(2.875651041667E-02,3.777994791667E-02));-#6216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6217 = SHELL_BASED_SURFACE_MODEL('',(#6218));-#6218 = OPEN_SHELL('',(#6219));-#6219 = ADVANCED_FACE('',(#6220),#6234,.T.);-#6220 = FACE_BOUND('',#6221,.F.);-#6221 = EDGE_LOOP('',(#6222,#6245,#6261,#6277,#6293,#6309,#6325,#6341,- #6357,#6373,#6389,#6405,#6421));-#6222 = ORIENTED_EDGE('',*,*,#6223,.T.);-#6223 = EDGE_CURVE('',#6224,#6226,#6228,.T.);-#6224 = VERTEX_POINT('',#6225);-#6225 = CARTESIAN_POINT('',(3.201497395833E-02,-3.231119791667E-02,- 0.9350001));-#6226 = VERTEX_POINT('',#6227);-#6227 = CARTESIAN_POINT('',(3.201497395833E-02,3.572916666667E-02,- 0.9350001));-#6228 = SURFACE_CURVE('',#6229,(#6233),.PCURVE_S1.);-#6229 = LINE('',#6230,#6231);-#6230 = CARTESIAN_POINT('',(3.201497395833E-02,-3.231119791667E-02,- 0.9350001));-#6231 = VECTOR('',#6232,1.);-#6232 = DIRECTION('',(0.,1.,0.));-#6233 = PCURVE('',#6234,#6239);-#6234 = PLANE('',#6235);-#6235 = AXIS2_PLACEMENT_3D('',#6236,#6237,#6238);-#6236 = CARTESIAN_POINT('',(2.8095703125E-02,-3.231119791667E-02,- 0.9350001));-#6237 = DIRECTION('',(0.,0.,1.));-#6238 = DIRECTION('',(1.,0.,-0.));-#6239 = DEFINITIONAL_REPRESENTATION('',(#6240),#6244);-#6240 = LINE('',#6241,#6242);-#6241 = CARTESIAN_POINT('',(3.91927083333E-03,0.));-#6242 = VECTOR('',#6243,1.);-#6243 = DIRECTION('',(0.,1.));-#6244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6245 = ORIENTED_EDGE('',*,*,#6246,.T.);-#6246 = EDGE_CURVE('',#6226,#6247,#6249,.T.);-#6247 = VERTEX_POINT('',#6248);-#6248 = CARTESIAN_POINT('',(4.431966145833E-02,3.572916666667E-02,- 0.9350001));-#6249 = SURFACE_CURVE('',#6250,(#6254),.PCURVE_S1.);-#6250 = LINE('',#6251,#6252);-#6251 = CARTESIAN_POINT('',(3.201497395833E-02,3.572916666667E-02,- 0.9350001));-#6252 = VECTOR('',#6253,1.);-#6253 = DIRECTION('',(1.,0.,0.));-#6254 = PCURVE('',#6234,#6255);-#6255 = DEFINITIONAL_REPRESENTATION('',(#6256),#6260);-#6256 = LINE('',#6257,#6258);-#6257 = CARTESIAN_POINT('',(3.91927083333E-03,6.804036458334E-02));-#6258 = VECTOR('',#6259,1.);-#6259 = DIRECTION('',(1.,0.));-#6260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6261 = ORIENTED_EDGE('',*,*,#6262,.T.);-#6262 = EDGE_CURVE('',#6247,#6263,#6265,.T.);-#6263 = VERTEX_POINT('',#6264);-#6264 = CARTESIAN_POINT('',(5.607747395833E-02,1.09375E-03,0.9350001));-#6265 = SURFACE_CURVE('',#6266,(#6270),.PCURVE_S1.);-#6266 = LINE('',#6267,#6268);-#6267 = CARTESIAN_POINT('',(4.431966145833E-02,3.572916666667E-02,- 0.9350001));-#6268 = VECTOR('',#6269,1.);-#6269 = DIRECTION('',(0.321455959028,-0.94692453047,0.));-#6270 = PCURVE('',#6234,#6271);-#6271 = DEFINITIONAL_REPRESENTATION('',(#6272),#6276);-#6272 = LINE('',#6273,#6274);-#6273 = CARTESIAN_POINT('',(1.622395833333E-02,6.804036458334E-02));-#6274 = VECTOR('',#6275,1.);-#6275 = DIRECTION('',(0.321455959028,-0.94692453047));-#6276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6277 = ORIENTED_EDGE('',*,*,#6278,.T.);-#6278 = EDGE_CURVE('',#6263,#6279,#6281,.T.);-#6279 = VERTEX_POINT('',#6280);-#6280 = CARTESIAN_POINT('',(6.792643229167E-02,3.572916666667E-02,- 0.9350001));-#6281 = SURFACE_CURVE('',#6282,(#6286),.PCURVE_S1.);-#6282 = LINE('',#6283,#6284);-#6283 = CARTESIAN_POINT('',(5.607747395833E-02,1.09375E-03,0.9350001));-#6284 = VECTOR('',#6285,1.);-#6285 = DIRECTION('',(0.323687679063,0.946163984953,0.));-#6286 = PCURVE('',#6234,#6287);-#6287 = DEFINITIONAL_REPRESENTATION('',(#6288),#6292);-#6288 = LINE('',#6289,#6290);-#6289 = CARTESIAN_POINT('',(2.798177083333E-02,3.340494791667E-02));-#6290 = VECTOR('',#6291,1.);-#6291 = DIRECTION('',(0.323687679063,0.946163984953));-#6292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6293 = ORIENTED_EDGE('',*,*,#6294,.T.);-#6294 = EDGE_CURVE('',#6279,#6295,#6297,.T.);-#6295 = VERTEX_POINT('',#6296);-#6296 = CARTESIAN_POINT('',(8.027669270833E-02,3.572916666667E-02,- 0.9350001));-#6297 = SURFACE_CURVE('',#6298,(#6302),.PCURVE_S1.);-#6298 = LINE('',#6299,#6300);-#6299 = CARTESIAN_POINT('',(6.792643229167E-02,3.572916666667E-02,- 0.9350001));-#6300 = VECTOR('',#6301,1.);-#6301 = DIRECTION('',(1.,0.,0.));-#6302 = PCURVE('',#6234,#6303);-#6303 = DEFINITIONAL_REPRESENTATION('',(#6304),#6308);-#6304 = LINE('',#6305,#6306);-#6305 = CARTESIAN_POINT('',(3.983072916667E-02,6.804036458334E-02));-#6306 = VECTOR('',#6307,1.);-#6307 = DIRECTION('',(1.,0.));-#6308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6309 = ORIENTED_EDGE('',*,*,#6310,.T.);-#6310 = EDGE_CURVE('',#6295,#6311,#6313,.T.);-#6311 = VERTEX_POINT('',#6312);-#6312 = CARTESIAN_POINT('',(8.027669270833E-02,-3.231119791667E-02,- 0.9350001));-#6313 = SURFACE_CURVE('',#6314,(#6318),.PCURVE_S1.);-#6314 = LINE('',#6315,#6316);-#6315 = CARTESIAN_POINT('',(8.027669270833E-02,3.572916666667E-02,- 0.9350001));-#6316 = VECTOR('',#6317,1.);-#6317 = DIRECTION('',(0.,-1.,0.));-#6318 = PCURVE('',#6234,#6319);-#6319 = DEFINITIONAL_REPRESENTATION('',(#6320),#6324);-#6320 = LINE('',#6321,#6322);-#6321 = CARTESIAN_POINT('',(5.218098958333E-02,6.804036458334E-02));-#6322 = VECTOR('',#6323,1.);-#6323 = DIRECTION('',(0.,-1.));-#6324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6325 = ORIENTED_EDGE('',*,*,#6326,.T.);-#6326 = EDGE_CURVE('',#6311,#6327,#6329,.T.);-#6327 = VERTEX_POINT('',#6328);-#6328 = CARTESIAN_POINT('',(7.175455729167E-02,-3.231119791667E-02,- 0.9350001));-#6329 = SURFACE_CURVE('',#6330,(#6334),.PCURVE_S1.);-#6330 = LINE('',#6331,#6332);-#6331 = CARTESIAN_POINT('',(8.027669270833E-02,-3.231119791667E-02,- 0.9350001));-#6332 = VECTOR('',#6333,1.);-#6333 = DIRECTION('',(-1.,0.,0.));-#6334 = PCURVE('',#6234,#6335);-#6335 = DEFINITIONAL_REPRESENTATION('',(#6336),#6340);-#6336 = LINE('',#6337,#6338);-#6337 = CARTESIAN_POINT('',(5.218098958333E-02,0.));-#6338 = VECTOR('',#6339,1.);-#6339 = DIRECTION('',(-1.,0.));-#6340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6341 = ORIENTED_EDGE('',*,*,#6342,.T.);-#6342 = EDGE_CURVE('',#6327,#6343,#6345,.T.);-#6343 = VERTEX_POINT('',#6344);-#6344 = CARTESIAN_POINT('',(7.175455729167E-02,2.779947916667E-02,- 0.9350001));-#6345 = SURFACE_CURVE('',#6346,(#6350),.PCURVE_S1.);-#6346 = LINE('',#6347,#6348);-#6347 = CARTESIAN_POINT('',(7.175455729167E-02,-3.231119791667E-02,- 0.9350001));-#6348 = VECTOR('',#6349,1.);-#6349 = DIRECTION('',(0.,1.,0.));-#6350 = PCURVE('',#6234,#6351);-#6351 = DEFINITIONAL_REPRESENTATION('',(#6352),#6356);-#6352 = LINE('',#6353,#6354);-#6353 = CARTESIAN_POINT('',(4.365885416667E-02,0.));-#6354 = VECTOR('',#6355,1.);-#6355 = DIRECTION('',(0.,1.));-#6356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6357 = ORIENTED_EDGE('',*,*,#6358,.T.);-#6358 = EDGE_CURVE('',#6343,#6359,#6361,.T.);-#6359 = VERTEX_POINT('',#6360);-#6360 = CARTESIAN_POINT('',(5.963216145833E-02,-8.06640625E-03,0.9350001- ));-#6361 = SURFACE_CURVE('',#6362,(#6366),.PCURVE_S1.);-#6362 = LINE('',#6363,#6364);-#6363 = CARTESIAN_POINT('',(7.175455729167E-02,2.779947916667E-02,- 0.9350001));-#6364 = VECTOR('',#6365,1.);-#6365 = DIRECTION('',(-0.320197367137,-0.947350856905,0.));-#6366 = PCURVE('',#6234,#6367);-#6367 = DEFINITIONAL_REPRESENTATION('',(#6368),#6372);-#6368 = LINE('',#6369,#6370);-#6369 = CARTESIAN_POINT('',(4.365885416667E-02,6.011067708334E-02));-#6370 = VECTOR('',#6371,1.);-#6371 = DIRECTION('',(-0.320197367137,-0.947350856905));-#6372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6373 = ORIENTED_EDGE('',*,*,#6374,.T.);-#6374 = EDGE_CURVE('',#6359,#6375,#6377,.T.);-#6375 = VERTEX_POINT('',#6376);-#6376 = CARTESIAN_POINT('',(5.265950520833E-02,-8.06640625E-03,0.9350001- ));-#6377 = SURFACE_CURVE('',#6378,(#6382),.PCURVE_S1.);-#6378 = LINE('',#6379,#6380);-#6379 = CARTESIAN_POINT('',(5.963216145833E-02,-8.06640625E-03,0.9350001- ));-#6380 = VECTOR('',#6381,1.);-#6381 = DIRECTION('',(-1.,0.,0.));-#6382 = PCURVE('',#6234,#6383);-#6383 = DEFINITIONAL_REPRESENTATION('',(#6384),#6388);-#6384 = LINE('',#6385,#6386);-#6385 = CARTESIAN_POINT('',(3.153645833333E-02,2.424479166667E-02));-#6386 = VECTOR('',#6387,1.);-#6387 = DIRECTION('',(-1.,0.));-#6388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6389 = ORIENTED_EDGE('',*,*,#6390,.T.);-#6390 = EDGE_CURVE('',#6375,#6391,#6393,.T.);-#6391 = VERTEX_POINT('',#6392);-#6392 = CARTESIAN_POINT('',(4.049153645833E-02,2.779947916667E-02,- 0.9350001));-#6393 = SURFACE_CURVE('',#6394,(#6398),.PCURVE_S1.);-#6394 = LINE('',#6395,#6396);-#6395 = CARTESIAN_POINT('',(5.265950520833E-02,-8.06640625E-03,0.9350001- ));-#6396 = VECTOR('',#6397,1.);-#6397 = DIRECTION('',(-0.321277075608,0.946985237841,0.));-#6398 = PCURVE('',#6234,#6399);-#6399 = DEFINITIONAL_REPRESENTATION('',(#6400),#6404);-#6400 = LINE('',#6401,#6402);-#6401 = CARTESIAN_POINT('',(2.456380208333E-02,2.424479166667E-02));-#6402 = VECTOR('',#6403,1.);-#6403 = DIRECTION('',(-0.321277075608,0.946985237841));-#6404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6405 = ORIENTED_EDGE('',*,*,#6406,.T.);-#6406 = EDGE_CURVE('',#6391,#6407,#6409,.T.);-#6407 = VERTEX_POINT('',#6408);-#6408 = CARTESIAN_POINT('',(4.049153645833E-02,-3.231119791667E-02,- 0.9350001));-#6409 = SURFACE_CURVE('',#6410,(#6414),.PCURVE_S1.);-#6410 = LINE('',#6411,#6412);-#6411 = CARTESIAN_POINT('',(4.049153645833E-02,2.779947916667E-02,- 0.9350001));-#6412 = VECTOR('',#6413,1.);-#6413 = DIRECTION('',(0.,-1.,0.));-#6414 = PCURVE('',#6234,#6415);-#6415 = DEFINITIONAL_REPRESENTATION('',(#6416),#6420);-#6416 = LINE('',#6417,#6418);-#6417 = CARTESIAN_POINT('',(1.239583333333E-02,6.011067708334E-02));-#6418 = VECTOR('',#6419,1.);-#6419 = DIRECTION('',(0.,-1.));-#6420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6421 = ORIENTED_EDGE('',*,*,#6422,.T.);-#6422 = EDGE_CURVE('',#6407,#6224,#6423,.T.);-#6423 = SURFACE_CURVE('',#6424,(#6428),.PCURVE_S1.);-#6424 = LINE('',#6425,#6426);-#6425 = CARTESIAN_POINT('',(4.049153645833E-02,-3.231119791667E-02,- 0.9350001));-#6426 = VECTOR('',#6427,1.);-#6427 = DIRECTION('',(-1.,0.,0.));-#6428 = PCURVE('',#6234,#6429);-#6429 = DEFINITIONAL_REPRESENTATION('',(#6430),#6434);-#6430 = LINE('',#6431,#6432);-#6431 = CARTESIAN_POINT('',(1.239583333333E-02,0.));-#6432 = VECTOR('',#6433,1.);-#6433 = DIRECTION('',(-1.,0.));-#6434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6435 = SHELL_BASED_SURFACE_MODEL('',(#6436));-#6436 = OPEN_SHELL('',(#6437));-#6437 = ADVANCED_FACE('',(#6438,#6589),#6452,.T.);-#6438 = FACE_BOUND('',#6439,.F.);-#6439 = EDGE_LOOP('',(#6440,#6463,#6479,#6495,#6511,#6527,#6543,#6559,- #6575));-#6440 = ORIENTED_EDGE('',*,*,#6441,.T.);-#6441 = EDGE_CURVE('',#6442,#6444,#6446,.T.);-#6442 = VERTEX_POINT('',#6443);-#6443 = CARTESIAN_POINT('',(9.326497395833E-02,-3.231119791667E-02,- 0.9350001));-#6444 = VERTEX_POINT('',#6445);-#6445 = CARTESIAN_POINT('',(9.326497395833E-02,3.572916666667E-02,- 0.9350001));-#6446 = SURFACE_CURVE('',#6447,(#6451),.PCURVE_S1.);-#6447 = LINE('',#6448,#6449);-#6448 = CARTESIAN_POINT('',(9.326497395833E-02,-3.231119791667E-02,- 0.9350001));-#6449 = VECTOR('',#6450,1.);-#6450 = DIRECTION('',(0.,1.,0.));-#6451 = PCURVE('',#6452,#6457);-#6452 = PLANE('',#6453);-#6453 = AXIS2_PLACEMENT_3D('',#6454,#6455,#6456);-#6454 = CARTESIAN_POINT('',(8.4287109375E-02,-3.231119791667E-02,- 0.9350001));-#6455 = DIRECTION('',(0.,0.,1.));-#6456 = DIRECTION('',(1.,0.,-0.));-#6457 = DEFINITIONAL_REPRESENTATION('',(#6458),#6462);-#6458 = LINE('',#6459,#6460);-#6459 = CARTESIAN_POINT('',(8.97786458333E-03,0.));-#6460 = VECTOR('',#6461,1.);-#6461 = DIRECTION('',(0.,1.));-#6462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6463 = ORIENTED_EDGE('',*,*,#6464,.T.);-#6464 = EDGE_CURVE('',#6444,#6465,#6467,.T.);-#6465 = VERTEX_POINT('',#6466);-#6466 = CARTESIAN_POINT('',(0.113134765625,3.572916666667E-02,0.9350001)- );-#6467 = SURFACE_CURVE('',#6468,(#6472),.PCURVE_S1.);-#6468 = LINE('',#6469,#6470);-#6469 = CARTESIAN_POINT('',(9.326497395833E-02,3.572916666667E-02,- 0.9350001));-#6470 = VECTOR('',#6471,1.);-#6471 = DIRECTION('',(1.,0.,0.));-#6472 = PCURVE('',#6452,#6473);-#6473 = DEFINITIONAL_REPRESENTATION('',(#6474),#6478);-#6474 = LINE('',#6475,#6476);-#6475 = CARTESIAN_POINT('',(8.97786458333E-03,6.804036458334E-02));-#6476 = VECTOR('',#6477,1.);-#6477 = DIRECTION('',(1.,0.));-#6478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6479 = ORIENTED_EDGE('',*,*,#6480,.T.);-#6480 = EDGE_CURVE('',#6465,#6481,#6483,.T.);-#6481 = VERTEX_POINT('',#6482);-#6482 = CARTESIAN_POINT('',(0.130406901042,3.0556640625E-02,0.9350001));-#6483 = SURFACE_CURVE('',#6484,(#6488),.PCURVE_S1.);-#6484 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6485,#6486,#6487),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6485 = CARTESIAN_POINT('',(0.113134765625,3.572916666667E-02,0.9350001)- );-#6486 = CARTESIAN_POINT('',(0.124527994792,3.572916666667E-02,0.9350001)- );-#6487 = CARTESIAN_POINT('',(0.130406901042,3.0556640625E-02,0.9350001));-#6488 = PCURVE('',#6452,#6489);-#6489 = DEFINITIONAL_REPRESENTATION('',(#6490),#6494);-#6490 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6491,#6492,#6493),+#5557 = CARTESIAN_POINT('',(2.893880497721E-02,-1.321614715E-03));+#5558 = CARTESIAN_POINT('',(1.708984545898E-02,-1.321614715E-03));+#5559 = CARTESIAN_POINT('',(1.157552199089E-02,7.177735093E-03));+#5560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5561 = ORIENTED_EDGE('',*,*,#5562,.T.);+#5562 = EDGE_CURVE('',#5547,#5563,#5565,.T.);+#5563 = VERTEX_POINT('',#5564);+#5564 = CARTESIAN_POINT('',(-2.203450741178E-02,0.626640400164,+ 0.59710515));+#5565 = SURFACE_CURVE('',#5566,(#5570),.PCURVE_S1.);+#5566 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5567,#5568,#5569),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5567 = CARTESIAN_POINT('',(-1.652018394368E-02,0.599866308945,+ 0.59710515));+#5568 = CARTESIAN_POINT('',(-2.203450741178E-02,0.608365658753,+ 0.59710515));+#5569 = CARTESIAN_POINT('',(-2.203450741178E-02,0.626640400164,+ 0.59710515));+#5570 = PCURVE('',#5374,#5571);+#5571 = DEFINITIONAL_REPRESENTATION('',(#5572),#5576);+#5572 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5573,#5574,#5575), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6491 = CARTESIAN_POINT('',(2.884765625E-02,6.804036458334E-02));-#6492 = CARTESIAN_POINT('',(4.0240885417E-02,6.804036458334E-02));-#6493 = CARTESIAN_POINT('',(4.6119791667E-02,6.286783854167E-02));-#6494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5573 = CARTESIAN_POINT('',(1.157552199089E-02,7.177735093E-03));+#5574 = CARTESIAN_POINT('',(6.06119852279E-03,1.5677084901E-02));+#5575 = CARTESIAN_POINT('',(6.06119852279E-03,3.3951826312E-02));+#5576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6495 = ORIENTED_EDGE('',*,*,#6496,.T.);-#6496 = EDGE_CURVE('',#6481,#6497,#6499,.T.);-#6497 = VERTEX_POINT('',#6498);-#6498 = CARTESIAN_POINT('',(0.136285807292,1.540364583333E-02,0.9350001)+#5577 = ORIENTED_EDGE('',*,*,#5578,.T.);+#5578 = EDGE_CURVE('',#5563,#5579,#5581,.T.);+#5579 = VERTEX_POINT('',#5580);+#5580 = CARTESIAN_POINT('',(-1.54036473737E-02,0.65291318925,0.59710515) );-#6499 = SURFACE_CURVE('',#6500,(#6504),.PCURVE_S1.);-#6500 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6501,#6502,#6503),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6501 = CARTESIAN_POINT('',(0.130406901042,3.0556640625E-02,0.9350001));-#6502 = CARTESIAN_POINT('',(0.136285807292,2.538411458333E-02,0.9350001)+#5581 = SURFACE_CURVE('',#5582,(#5586),.PCURVE_S1.);+#5582 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5583,#5584,#5585),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5583 = CARTESIAN_POINT('',(-2.203450741178E-02,0.626640400164,+ 0.59710515));+#5584 = CARTESIAN_POINT('',(-2.203450741178E-02,0.643866964387,+ 0.59710515));+#5585 = CARTESIAN_POINT('',(-1.54036473737E-02,0.65291318925,0.59710515) );-#6503 = CARTESIAN_POINT('',(0.136285807292,1.540364583333E-02,0.9350001)- );-#6504 = PCURVE('',#6452,#6505);-#6505 = DEFINITIONAL_REPRESENTATION('',(#6506),#6510);-#6506 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6507,#6508,#6509),+#5586 = PCURVE('',#5374,#5587);+#5587 = DEFINITIONAL_REPRESENTATION('',(#5588),#5592);+#5588 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5589,#5590,#5591), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6507 = CARTESIAN_POINT('',(4.6119791667E-02,6.286783854167E-02));-#6508 = CARTESIAN_POINT('',(5.1998697917E-02,5.76953125E-02));-#6509 = CARTESIAN_POINT('',(5.1998697917E-02,4.771484375E-02));-#6510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5589 = CARTESIAN_POINT('',(6.06119852279E-03,3.3951826312E-02));+#5590 = CARTESIAN_POINT('',(6.06119852279E-03,5.1178390535E-02));+#5591 = CARTESIAN_POINT('',(1.269205856087E-02,6.0224615398E-02));+#5592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6511 = ORIENTED_EDGE('',*,*,#6512,.T.);-#6512 = EDGE_CURVE('',#6497,#6513,#6515,.T.);-#6513 = VERTEX_POINT('',#6514);-#6514 = CARTESIAN_POINT('',(0.1304296875,1.822916666667E-04,0.9350001));-#6515 = SURFACE_CURVE('',#6516,(#6520),.PCURVE_S1.);-#6516 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6517,#6518,#6519),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6517 = CARTESIAN_POINT('',(0.136285807292,1.540364583333E-02,0.9350001)- );-#6518 = CARTESIAN_POINT('',(0.136285807292,5.33203125E-03,0.9350001));-#6519 = CARTESIAN_POINT('',(0.1304296875,1.822916666667E-04,0.9350001));-#6520 = PCURVE('',#6452,#6521);-#6521 = DEFINITIONAL_REPRESENTATION('',(#6522),#6526);-#6522 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6523,#6524,#6525),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6523 = CARTESIAN_POINT('',(5.1998697917E-02,4.771484375E-02));-#6524 = CARTESIAN_POINT('',(5.1998697917E-02,3.764322916667E-02));-#6525 = CARTESIAN_POINT('',(4.6142578125E-02,3.249348958334E-02));-#6526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6527 = ORIENTED_EDGE('',*,*,#6528,.T.);-#6528 = EDGE_CURVE('',#6513,#6529,#6531,.T.);-#6529 = VERTEX_POINT('',#6530);-#6530 = CARTESIAN_POINT('',(0.113134765625,-4.967447916667E-03,0.9350001+#5593 = ORIENTED_EDGE('',*,*,#5594,.T.);+#5594 = EDGE_CURVE('',#5579,#5595,#5597,.T.);+#5595 = VERTEX_POINT('',#5596);+#5596 = CARTESIAN_POINT('',(3.805338922201E-03,0.661959414113,0.59710515 ));-#6531 = SURFACE_CURVE('',#6532,(#6536),.PCURVE_S1.);-#6532 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6533,#6534,#6535),+#5597 = SURFACE_CURVE('',#5598,(#5602),.PCURVE_S1.);+#5598 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5599,#5600,#5601), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6533 = CARTESIAN_POINT('',(0.1304296875,1.822916666667E-04,0.9350001));-#6534 = CARTESIAN_POINT('',(0.124573567708,-4.967447916667E-03,0.9350001- ));-#6535 = CARTESIAN_POINT('',(0.113134765625,-4.967447916667E-03,0.9350001+#5599 = CARTESIAN_POINT('',(-1.54036473737E-02,0.65291318925,0.59710515)+ );+#5600 = CARTESIAN_POINT('',(-8.772787335612E-03,0.661959414113,+ 0.59710515));+#5601 = CARTESIAN_POINT('',(3.805338922201E-03,0.661959414113,0.59710515 ));-#6536 = PCURVE('',#6452,#6537);-#6537 = DEFINITIONAL_REPRESENTATION('',(#6538),#6542);-#6538 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6539,#6540,#6541),+#5602 = PCURVE('',#5374,#5603);+#5603 = DEFINITIONAL_REPRESENTATION('',(#5604),#5608);+#5604 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5605,#5606,#5607), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6539 = CARTESIAN_POINT('',(4.6142578125E-02,3.249348958334E-02));-#6540 = CARTESIAN_POINT('',(4.0286458333E-02,2.734375E-02));-#6541 = CARTESIAN_POINT('',(2.884765625E-02,2.734375E-02));-#6542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5605 = CARTESIAN_POINT('',(1.269205856087E-02,6.0224615398E-02));+#5606 = CARTESIAN_POINT('',(1.932291859896E-02,6.9270840261E-02));+#5607 = CARTESIAN_POINT('',(3.190104485677E-02,6.9270840261E-02));+#5608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6543 = ORIENTED_EDGE('',*,*,#6544,.T.);-#6544 = EDGE_CURVE('',#6529,#6545,#6547,.T.);-#6545 = VERTEX_POINT('',#6546);-#6546 = CARTESIAN_POINT('',(0.102470703125,-4.967447916667E-03,0.9350001+#5609 = ORIENTED_EDGE('',*,*,#5610,.T.);+#5610 = EDGE_CURVE('',#5595,#5611,#5613,.T.);+#5611 = VERTEX_POINT('',#5612);+#5612 = CARTESIAN_POINT('',(1.055013126335E-02,0.661253033834,0.59710515 ));-#6547 = SURFACE_CURVE('',#6548,(#6552),.PCURVE_S1.);-#6548 = LINE('',#6549,#6550);-#6549 = CARTESIAN_POINT('',(0.113134765625,-4.967447916667E-03,0.9350001- ));-#6550 = VECTOR('',#6551,1.);-#6551 = DIRECTION('',(-1.,0.,0.));-#6552 = PCURVE('',#6452,#6553);-#6553 = DEFINITIONAL_REPRESENTATION('',(#6554),#6558);-#6554 = LINE('',#6555,#6556);-#6555 = CARTESIAN_POINT('',(2.884765625E-02,2.734375E-02));-#6556 = VECTOR('',#6557,1.);-#6557 = DIRECTION('',(-1.,0.));-#6558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6559 = ORIENTED_EDGE('',*,*,#6560,.T.);-#6560 = EDGE_CURVE('',#6545,#6561,#6563,.T.);-#6561 = VERTEX_POINT('',#6562);-#6562 = CARTESIAN_POINT('',(0.102470703125,-3.231119791667E-02,0.9350001+#5613 = SURFACE_CURVE('',#5614,(#5618),.PCURVE_S1.);+#5614 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5615,#5616,#5617),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5615 = CARTESIAN_POINT('',(3.805338922201E-03,0.661959414113,0.59710515 ));-#6563 = SURFACE_CURVE('',#6564,(#6568),.PCURVE_S1.);-#6564 = LINE('',#6565,#6566);-#6565 = CARTESIAN_POINT('',(0.102470703125,-4.967447916667E-03,0.9350001+#5616 = CARTESIAN_POINT('',(7.177735092773E-03,0.661959414113,0.59710515 ));-#6566 = VECTOR('',#6567,1.);-#6567 = DIRECTION('',(0.,-1.,0.));-#6568 = PCURVE('',#6452,#6569);-#6569 = DEFINITIONAL_REPRESENTATION('',(#6570),#6574);-#6570 = LINE('',#6571,#6572);-#6571 = CARTESIAN_POINT('',(1.818359375E-02,2.734375E-02));-#6572 = VECTOR('',#6573,1.);-#6573 = DIRECTION('',(0.,-1.));-#6574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6575 = ORIENTED_EDGE('',*,*,#6576,.T.);-#6576 = EDGE_CURVE('',#6561,#6442,#6577,.T.);-#6577 = SURFACE_CURVE('',#6578,(#6582),.PCURVE_S1.);-#6578 = LINE('',#6579,#6580);-#6579 = CARTESIAN_POINT('',(0.102470703125,-3.231119791667E-02,0.9350001+#5617 = CARTESIAN_POINT('',(1.055013126335E-02,0.661253033834,0.59710515 ));-#6580 = VECTOR('',#6581,1.);-#6581 = DIRECTION('',(-1.,0.,0.));-#6582 = PCURVE('',#6452,#6583);-#6583 = DEFINITIONAL_REPRESENTATION('',(#6584),#6588);-#6584 = LINE('',#6585,#6586);-#6585 = CARTESIAN_POINT('',(1.818359375E-02,0.));-#6586 = VECTOR('',#6587,1.);-#6587 = DIRECTION('',(-1.,0.));-#6588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6589 = FACE_BOUND('',#6590,.F.);-#6590 = EDGE_LOOP('',(#6591,#6609,#6625,#6641,#6657,#6673,#6689));-#6591 = ORIENTED_EDGE('',*,*,#6592,.T.);-#6592 = EDGE_CURVE('',#6593,#6595,#6597,.T.);-#6593 = VERTEX_POINT('',#6594);-#6594 = CARTESIAN_POINT('',(0.113134765625,2.81640625E-02,0.9350001));-#6595 = VERTEX_POINT('',#6596);-#6596 = CARTESIAN_POINT('',(0.102470703125,2.81640625E-02,0.9350001));-#6597 = SURFACE_CURVE('',#6598,(#6602),.PCURVE_S1.);-#6598 = LINE('',#6599,#6600);-#6599 = CARTESIAN_POINT('',(0.113134765625,2.81640625E-02,0.9350001));-#6600 = VECTOR('',#6601,1.);-#6601 = DIRECTION('',(-1.,0.,0.));-#6602 = PCURVE('',#6452,#6603);-#6603 = DEFINITIONAL_REPRESENTATION('',(#6604),#6608);-#6604 = LINE('',#6605,#6606);-#6605 = CARTESIAN_POINT('',(2.884765625E-02,6.047526041667E-02));-#6606 = VECTOR('',#6607,1.);-#6607 = DIRECTION('',(-1.,0.));-#6608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6609 = ORIENTED_EDGE('',*,*,#6610,.T.);-#6610 = EDGE_CURVE('',#6595,#6611,#6613,.T.);-#6611 = VERTEX_POINT('',#6612);-#6612 = CARTESIAN_POINT('',(0.102470703125,2.59765625E-03,0.9350001));-#6613 = SURFACE_CURVE('',#6614,(#6618),.PCURVE_S1.);-#6614 = LINE('',#6615,#6616);-#6615 = CARTESIAN_POINT('',(0.102470703125,2.81640625E-02,0.9350001));-#6616 = VECTOR('',#6617,1.);-#6617 = DIRECTION('',(0.,-1.,0.));-#6618 = PCURVE('',#6452,#6619);-#6619 = DEFINITIONAL_REPRESENTATION('',(#6620),#6624);-#6620 = LINE('',#6621,#6622);-#6621 = CARTESIAN_POINT('',(1.818359375E-02,6.047526041667E-02));-#6622 = VECTOR('',#6623,1.);-#6623 = DIRECTION('',(0.,-1.));-#6624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6625 = ORIENTED_EDGE('',*,*,#6626,.T.);-#6626 = EDGE_CURVE('',#6611,#6627,#6629,.T.);-#6627 = VERTEX_POINT('',#6628);-#6628 = CARTESIAN_POINT('',(0.113134765625,2.59765625E-03,0.9350001));-#6629 = SURFACE_CURVE('',#6630,(#6634),.PCURVE_S1.);-#6630 = LINE('',#6631,#6632);-#6631 = CARTESIAN_POINT('',(0.102470703125,2.59765625E-03,0.9350001));-#6632 = VECTOR('',#6633,1.);-#6633 = DIRECTION('',(1.,0.,0.));-#6634 = PCURVE('',#6452,#6635);-#6635 = DEFINITIONAL_REPRESENTATION('',(#6636),#6640);-#6636 = LINE('',#6637,#6638);-#6637 = CARTESIAN_POINT('',(1.818359375E-02,3.490885416667E-02));-#6638 = VECTOR('',#6639,1.);-#6639 = DIRECTION('',(1.,0.));-#6640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6641 = ORIENTED_EDGE('',*,*,#6642,.T.);-#6642 = EDGE_CURVE('',#6627,#6643,#6645,.T.);-#6643 = VERTEX_POINT('',#6644);-#6644 = CARTESIAN_POINT('',(0.123092447917,5.970052083333E-03,0.9350001)+#5618 = PCURVE('',#5374,#5619);+#5619 = DEFINITIONAL_REPRESENTATION('',(#5620),#5624);+#5620 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5621,#5622,#5623),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5621 = CARTESIAN_POINT('',(3.190104485677E-02,6.9270840261E-02));+#5622 = CARTESIAN_POINT('',(3.527344102734E-02,6.9270840261E-02));+#5623 = CARTESIAN_POINT('',(3.864583719792E-02,6.8564459982E-02));+#5624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5625 = ORIENTED_EDGE('',*,*,#5626,.T.);+#5626 = EDGE_CURVE('',#5611,#5364,#5627,.T.);+#5627 = SURFACE_CURVE('',#5628,(#5632),.PCURVE_S1.);+#5628 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5629,#5630,#5631),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5629 = CARTESIAN_POINT('',(1.055013126335E-02,0.661253033834,0.59710515+ ));+#5630 = CARTESIAN_POINT('',(1.392252743392E-02,0.660546653555,0.59710515+ ));+#5631 = CARTESIAN_POINT('',(1.706705899837E-02,0.659225038839,0.59710515+ ));+#5632 = PCURVE('',#5374,#5633);+#5633 = DEFINITIONAL_REPRESENTATION('',(#5634),#5638);+#5634 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5635,#5636,#5637),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5635 = CARTESIAN_POINT('',(3.864583719792E-02,6.8564459982E-02));+#5636 = CARTESIAN_POINT('',(4.201823336849E-02,6.7858079703E-02));+#5637 = CARTESIAN_POINT('',(4.516276493294E-02,6.6536464987E-02));+#5638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5639 = FACE_BOUND('',#5640,.F.);+#5640 = EDGE_LOOP('',(#5641,#5659,#5675,#5691,#5707,#5723,#5739,#5755));+#5641 = ORIENTED_EDGE('',*,*,#5642,.T.);+#5642 = EDGE_CURVE('',#5643,#5645,#5647,.T.);+#5643 = VERTEX_POINT('',#5644);+#5644 = CARTESIAN_POINT('',(6.608073577474E-04,0.630468525547,0.59710515+ ));+#5645 = VERTEX_POINT('',#5646);+#5646 = CARTESIAN_POINT('',(-8.590495650716E-03,0.626230243873,+ 0.59710515));+#5647 = SURFACE_CURVE('',#5648,(#5652),.PCURVE_S1.);+#5648 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5649,#5650,#5651),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5649 = CARTESIAN_POINT('',(6.608073577474E-04,0.630468525547,0.59710515+ ));+#5650 = CARTESIAN_POINT('',(-5.218099480143E-03,0.630468525547,+ 0.59710515));+#5651 = CARTESIAN_POINT('',(-8.590495650716E-03,0.626230243873,+ 0.59710515));+#5652 = PCURVE('',#5374,#5653);+#5653 = DEFINITIONAL_REPRESENTATION('',(#5654),#5658);+#5654 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5655,#5656,#5657),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5655 = CARTESIAN_POINT('',(2.875651329232E-02,3.7779951695E-02));+#5656 = CARTESIAN_POINT('',(2.287760645443E-02,3.7779951695E-02));+#5657 = CARTESIAN_POINT('',(1.950521028385E-02,3.3541670021E-02));+#5658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5659 = ORIENTED_EDGE('',*,*,#5660,.T.);+#5660 = EDGE_CURVE('',#5645,#5661,#5663,.T.);+#5661 = VERTEX_POINT('',#5662);+#5662 = CARTESIAN_POINT('',(-1.196289182129E-02,0.614518003118,+ 0.59710515));+#5663 = SURFACE_CURVE('',#5664,(#5668),.PCURVE_S1.);+#5664 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5665,#5666,#5667),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5665 = CARTESIAN_POINT('',(-8.590495650716E-03,0.626230243873,+ 0.59710515));+#5666 = CARTESIAN_POINT('',(-1.196289182129E-02,0.621991962199,+ 0.59710515));+#5667 = CARTESIAN_POINT('',(-1.196289182129E-02,0.614518003118,+ 0.59710515));+#5668 = PCURVE('',#5374,#5669);+#5669 = DEFINITIONAL_REPRESENTATION('',(#5670),#5674);+#5670 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5671,#5672,#5673),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5671 = CARTESIAN_POINT('',(1.950521028385E-02,3.3541670021E-02));+#5672 = CARTESIAN_POINT('',(1.613281411328E-02,2.9303388347E-02));+#5673 = CARTESIAN_POINT('',(1.613281411328E-02,2.1829429266E-02));+#5674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5675 = ORIENTED_EDGE('',*,*,#5676,.T.);+#5676 = EDGE_CURVE('',#5661,#5677,#5679,.T.);+#5677 = VERTEX_POINT('',#5678);+#5678 = CARTESIAN_POINT('',(-8.590495650716E-03,0.602805762364,+ 0.59710515));+#5679 = SURFACE_CURVE('',#5680,(#5684),.PCURVE_S1.);+#5680 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5681,#5682,#5683),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5681 = CARTESIAN_POINT('',(-1.196289182129E-02,0.614518003118,+ 0.59710515));+#5682 = CARTESIAN_POINT('',(-1.196289182129E-02,0.607044044038,+ 0.59710515));+#5683 = CARTESIAN_POINT('',(-8.590495650716E-03,0.602805762364,+ 0.59710515));+#5684 = PCURVE('',#5374,#5685);+#5685 = DEFINITIONAL_REPRESENTATION('',(#5686),#5690);+#5686 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5687,#5688,#5689),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5687 = CARTESIAN_POINT('',(1.613281411328E-02,2.1829429266E-02));+#5688 = CARTESIAN_POINT('',(1.613281411328E-02,1.4355470186E-02));+#5689 = CARTESIAN_POINT('',(1.950521028385E-02,1.0117188512E-02));+#5690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5691 = ORIENTED_EDGE('',*,*,#5692,.T.);+#5692 = EDGE_CURVE('',#5677,#5693,#5695,.T.);+#5693 = VERTEX_POINT('',#5694);+#5694 = CARTESIAN_POINT('',(6.608073577474E-04,0.59856748069,0.59710515) );-#6645 = SURFACE_CURVE('',#6646,(#6650),.PCURVE_S1.);-#6646 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6647,#6648,#6649),+#5695 = SURFACE_CURVE('',#5696,(#5700),.PCURVE_S1.);+#5696 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5697,#5698,#5699), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6647 = CARTESIAN_POINT('',(0.113134765625,2.59765625E-03,0.9350001));-#6648 = CARTESIAN_POINT('',(0.119514973958,2.59765625E-03,0.9350001));-#6649 = CARTESIAN_POINT('',(0.123092447917,5.970052083333E-03,0.9350001)+#5697 = CARTESIAN_POINT('',(-8.590495650716E-03,0.602805762364,+ 0.59710515));+#5698 = CARTESIAN_POINT('',(-5.218099480143E-03,0.59856748069,0.59710515+ ));+#5699 = CARTESIAN_POINT('',(6.608073577474E-04,0.59856748069,0.59710515) );-#6650 = PCURVE('',#6452,#6651);-#6651 = DEFINITIONAL_REPRESENTATION('',(#6652),#6656);-#6652 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6653,#6654,#6655),+#5700 = PCURVE('',#5374,#5701);+#5701 = DEFINITIONAL_REPRESENTATION('',(#5702),#5706);+#5702 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5703,#5704,#5705), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6653 = CARTESIAN_POINT('',(2.884765625E-02,3.490885416667E-02));-#6654 = CARTESIAN_POINT('',(3.5227864583E-02,3.490885416667E-02));-#6655 = CARTESIAN_POINT('',(3.8805338542E-02,3.828125E-02));-#6656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5703 = CARTESIAN_POINT('',(1.950521028385E-02,1.0117188512E-02));+#5704 = CARTESIAN_POINT('',(2.287760645443E-02,5.878906838E-03));+#5705 = CARTESIAN_POINT('',(2.875651329232E-02,5.878906838E-03));+#5706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6657 = ORIENTED_EDGE('',*,*,#6658,.T.);-#6658 = EDGE_CURVE('',#6643,#6659,#6661,.T.);-#6659 = VERTEX_POINT('',#6660);-#6660 = CARTESIAN_POINT('',(0.126669921875,1.540364583333E-02,0.9350001)- );-#6661 = SURFACE_CURVE('',#6662,(#6666),.PCURVE_S1.);-#6662 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6663,#6664,#6665),+#5707 = ORIENTED_EDGE('',*,*,#5708,.T.);+#5708 = EDGE_CURVE('',#5693,#5709,#5711,.T.);+#5709 = VERTEX_POINT('',#5710);+#5710 = CARTESIAN_POINT('',(9.866537444987E-03,0.602600684218,0.59710515+ ));+#5711 = SURFACE_CURVE('',#5712,(#5716),.PCURVE_S1.);+#5712 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5713,#5714,#5715), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6663 = CARTESIAN_POINT('',(0.123092447917,5.970052083333E-03,0.9350001)- );-#6664 = CARTESIAN_POINT('',(0.126669921875,9.342447916667E-03,0.9350001)+#5713 = CARTESIAN_POINT('',(6.608073577474E-04,0.59856748069,0.59710515) );-#6665 = CARTESIAN_POINT('',(0.126669921875,1.540364583333E-02,0.9350001)+#5714 = CARTESIAN_POINT('',(6.767578801758E-03,0.59856748069,0.59710515) );-#6666 = PCURVE('',#6452,#6667);-#6667 = DEFINITIONAL_REPRESENTATION('',(#6668),#6672);-#6668 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6669,#6670,#6671),+#5715 = CARTESIAN_POINT('',(9.866537444987E-03,0.602600684218,0.59710515+ ));+#5716 = PCURVE('',#5374,#5717);+#5717 = DEFINITIONAL_REPRESENTATION('',(#5718),#5722);+#5718 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5719,#5720,#5721), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6669 = CARTESIAN_POINT('',(3.8805338542E-02,3.828125E-02));-#6670 = CARTESIAN_POINT('',(4.23828125E-02,4.165364583334E-02));-#6671 = CARTESIAN_POINT('',(4.23828125E-02,4.771484375E-02));-#6672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5719 = CARTESIAN_POINT('',(2.875651329232E-02,5.878906838E-03));+#5720 = CARTESIAN_POINT('',(3.486328473633E-02,5.878906838E-03));+#5721 = CARTESIAN_POINT('',(3.796224337956E-02,9.912110366E-03));+#5722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6673 = ORIENTED_EDGE('',*,*,#6674,.T.);-#6674 = EDGE_CURVE('',#6659,#6675,#6677,.T.);-#6675 = VERTEX_POINT('',#6676);-#6676 = CARTESIAN_POINT('',(0.123115234375,2.4814453125E-02,0.9350001));-#6677 = SURFACE_CURVE('',#6678,(#6682),.PCURVE_S1.);-#6678 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6679,#6680,#6681),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6679 = CARTESIAN_POINT('',(0.126669921875,1.540364583333E-02,0.9350001)- );-#6680 = CARTESIAN_POINT('',(0.126669921875,2.146484375E-02,0.9350001));-#6681 = CARTESIAN_POINT('',(0.123115234375,2.4814453125E-02,0.9350001));-#6682 = PCURVE('',#6452,#6683);-#6683 = DEFINITIONAL_REPRESENTATION('',(#6684),#6688);-#6684 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6685,#6686,#6687),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6685 = CARTESIAN_POINT('',(4.23828125E-02,4.771484375E-02));-#6686 = CARTESIAN_POINT('',(4.23828125E-02,5.377604166667E-02));-#6687 = CARTESIAN_POINT('',(3.8828125E-02,5.712565104167E-02));-#6688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6689 = ORIENTED_EDGE('',*,*,#6690,.T.);-#6690 = EDGE_CURVE('',#6675,#6593,#6691,.T.);-#6691 = SURFACE_CURVE('',#6692,(#6696),.PCURVE_S1.);-#6692 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6693,#6694,#6695),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6693 = CARTESIAN_POINT('',(0.123115234375,2.4814453125E-02,0.9350001));-#6694 = CARTESIAN_POINT('',(0.119560546875,2.81640625E-02,0.9350001));-#6695 = CARTESIAN_POINT('',(0.113134765625,2.81640625E-02,0.9350001));-#6696 = PCURVE('',#6452,#6697);-#6697 = DEFINITIONAL_REPRESENTATION('',(#6698),#6702);-#6698 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6699,#6700,#6701),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6699 = CARTESIAN_POINT('',(3.8828125E-02,5.712565104167E-02));-#6700 = CARTESIAN_POINT('',(3.52734375E-02,6.047526041667E-02));-#6701 = CARTESIAN_POINT('',(2.884765625E-02,6.047526041667E-02));-#6702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6703 = SHELL_BASED_SURFACE_MODEL('',(#6704));-#6704 = OPEN_SHELL('',(#6705));-#6705 = ADVANCED_FACE('',(#6706,#6921),#6720,.T.);-#6706 = FACE_BOUND('',#6707,.F.);-#6707 = EDGE_LOOP('',(#6708,#6731,#6747,#6763,#6779,#6795,#6811,#6827,- #6843,#6859,#6875,#6891,#6907));-#6708 = ORIENTED_EDGE('',*,*,#6709,.T.);-#6709 = EDGE_CURVE('',#6710,#6712,#6714,.T.);-#6710 = VERTEX_POINT('',#6711);-#6711 = CARTESIAN_POINT('',(0.180992838542,-4.461588541667E-02,0.9350001- ));-#6712 = VERTEX_POINT('',#6713);-#6713 = CARTESIAN_POINT('',(0.170328776042,-3.354166666667E-02,0.9350001- ));-#6714 = SURFACE_CURVE('',#6715,(#6719),.PCURVE_S1.);-#6715 = LINE('',#6716,#6717);-#6716 = CARTESIAN_POINT('',(0.180992838542,-4.461588541667E-02,0.9350001- ));-#6717 = VECTOR('',#6718,1.);-#6718 = DIRECTION('',(-0.693641687066,0.720320213491,0.));-#6719 = PCURVE('',#6720,#6725);-#6720 = PLANE('',#6721);-#6721 = AXIS2_PLACEMENT_3D('',#6722,#6723,#6724);-#6722 = CARTESIAN_POINT('',(0.140478515625,-3.231119791667E-02,0.9350001+#5723 = ORIENTED_EDGE('',*,*,#5724,.T.);+#5724 = EDGE_CURVE('',#5709,#5725,#5727,.T.);+#5725 = VERTEX_POINT('',#5726);+#5726 = CARTESIAN_POINT('',(1.296549608822E-02,0.614518003118,0.59710515 ));-#6723 = DIRECTION('',(0.,0.,1.));-#6724 = DIRECTION('',(1.,0.,-0.));-#6725 = DEFINITIONAL_REPRESENTATION('',(#6726),#6730);-#6726 = LINE('',#6727,#6728);-#6727 = CARTESIAN_POINT('',(4.0514322917E-02,-1.23046875E-02));-#6728 = VECTOR('',#6729,1.);-#6729 = DIRECTION('',(-0.693641687066,0.720320213491));-#6730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6731 = ORIENTED_EDGE('',*,*,#6732,.T.);-#6732 = EDGE_CURVE('',#6712,#6733,#6735,.T.);-#6733 = VERTEX_POINT('',#6734);-#6734 = CARTESIAN_POINT('',(0.169417317708,-3.358723958333E-02,0.9350001- ));-#6735 = SURFACE_CURVE('',#6736,(#6740),.PCURVE_S1.);-#6736 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6737,#6738,#6739),+#5727 = SURFACE_CURVE('',#5728,(#5732),.PCURVE_S1.);+#5728 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5729,#5730,#5731), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6737 = CARTESIAN_POINT('',(0.170328776042,-3.354166666667E-02,0.9350001+#5729 = CARTESIAN_POINT('',(9.866537444987E-03,0.602600684218,0.59710515 ));-#6738 = CARTESIAN_POINT('',(0.170009765625,-3.354166666667E-02,0.9350001+#5730 = CARTESIAN_POINT('',(1.296549608822E-02,0.606633887747,0.59710515 ));-#6739 = CARTESIAN_POINT('',(0.169417317708,-3.358723958333E-02,0.9350001+#5731 = CARTESIAN_POINT('',(1.296549608822E-02,0.614518003118,0.59710515 ));-#6740 = PCURVE('',#6720,#6741);-#6741 = DEFINITIONAL_REPRESENTATION('',(#6742),#6746);-#6742 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6743,#6744,#6745),+#5732 = PCURVE('',#5374,#5733);+#5733 = DEFINITIONAL_REPRESENTATION('',(#5734),#5738);+#5734 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5735,#5736,#5737), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6743 = CARTESIAN_POINT('',(2.9850260417E-02,-1.23046875E-03));-#6744 = CARTESIAN_POINT('',(2.953125E-02,-1.23046875E-03));-#6745 = CARTESIAN_POINT('',(2.8938802083E-02,-1.27604166666E-03));-#6746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5735 = CARTESIAN_POINT('',(3.796224337956E-02,9.912110366E-03));+#5736 = CARTESIAN_POINT('',(4.106120202279E-02,1.3945313895E-02));+#5737 = CARTESIAN_POINT('',(4.106120202279E-02,2.1829429266E-02));+#5738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6747 = ORIENTED_EDGE('',*,*,#6748,.T.);-#6748 = EDGE_CURVE('',#6733,#6749,#6751,.T.);-#6749 = VERTEX_POINT('',#6750);-#6750 = CARTESIAN_POINT('',(0.168460286458,-3.36328125E-02,0.9350001));-#6751 = SURFACE_CURVE('',#6752,(#6756),.PCURVE_S1.);-#6752 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6753,#6754,#6755),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6753 = CARTESIAN_POINT('',(0.169417317708,-3.358723958333E-02,0.9350001+#5739 = ORIENTED_EDGE('',*,*,#5740,.T.);+#5740 = EDGE_CURVE('',#5725,#5741,#5743,.T.);+#5741 = VERTEX_POINT('',#5742);+#5742 = CARTESIAN_POINT('',(9.866537444987E-03,0.626458108479,0.59710515 ));-#6754 = CARTESIAN_POINT('',(0.168824869792,-3.36328125E-02,0.9350001));-#6755 = CARTESIAN_POINT('',(0.168460286458,-3.36328125E-02,0.9350001));-#6756 = PCURVE('',#6720,#6757);-#6757 = DEFINITIONAL_REPRESENTATION('',(#6758),#6762);-#6758 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6759,#6760,#6761),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6759 = CARTESIAN_POINT('',(2.8938802083E-02,-1.27604166666E-03));-#6760 = CARTESIAN_POINT('',(2.8346354167E-02,-1.32161458333E-03));-#6761 = CARTESIAN_POINT('',(2.7981770833E-02,-1.32161458333E-03));-#6762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6763 = ORIENTED_EDGE('',*,*,#6764,.T.);-#6764 = EDGE_CURVE('',#6749,#6765,#6767,.T.);-#6765 = VERTEX_POINT('',#6766);-#6766 = CARTESIAN_POINT('',(0.151438802083,-2.48828125E-02,0.9350001));-#6767 = SURFACE_CURVE('',#6768,(#6772),.PCURVE_S1.);-#6768 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6769,#6770,#6771),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6769 = CARTESIAN_POINT('',(0.168460286458,-3.36328125E-02,0.9350001));-#6770 = CARTESIAN_POINT('',(0.157067057292,-3.36328125E-02,0.9350001));-#6771 = CARTESIAN_POINT('',(0.151438802083,-2.48828125E-02,0.9350001));-#6772 = PCURVE('',#6720,#6773);-#6773 = DEFINITIONAL_REPRESENTATION('',(#6774),#6778);-#6774 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6775,#6776,#6777),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6775 = CARTESIAN_POINT('',(2.7981770833E-02,-1.32161458333E-03));-#6776 = CARTESIAN_POINT('',(1.6588541667E-02,-1.32161458333E-03));-#6777 = CARTESIAN_POINT('',(1.0960286458E-02,7.42838541667E-03));-#6778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6779 = ORIENTED_EDGE('',*,*,#6780,.T.);-#6780 = EDGE_CURVE('',#6765,#6781,#6783,.T.);-#6781 = VERTEX_POINT('',#6782);-#6782 = CARTESIAN_POINT('',(0.145810546875,1.640625E-03,0.9350001));-#6783 = SURFACE_CURVE('',#6784,(#6788),.PCURVE_S1.);-#6784 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6785,#6786,#6787),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6785 = CARTESIAN_POINT('',(0.151438802083,-2.48828125E-02,0.9350001));-#6786 = CARTESIAN_POINT('',(0.145810546875,-1.61328125E-02,0.9350001));-#6787 = CARTESIAN_POINT('',(0.145810546875,1.640625E-03,0.9350001));-#6788 = PCURVE('',#6720,#6789);-#6789 = DEFINITIONAL_REPRESENTATION('',(#6790),#6794);-#6790 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6791,#6792,#6793),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6791 = CARTESIAN_POINT('',(1.0960286458E-02,7.42838541667E-03));-#6792 = CARTESIAN_POINT('',(5.33203125E-03,1.617838541667E-02));-#6793 = CARTESIAN_POINT('',(5.33203125E-03,3.395182291667E-02));-#6794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6795 = ORIENTED_EDGE('',*,*,#6796,.T.);-#6796 = EDGE_CURVE('',#6781,#6797,#6799,.T.);-#6797 = VERTEX_POINT('',#6798);-#6798 = CARTESIAN_POINT('',(0.151438802083,2.820963541667E-02,0.9350001)- );-#6799 = SURFACE_CURVE('',#6800,(#6804),.PCURVE_S1.);-#6800 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6801,#6802,#6803),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6801 = CARTESIAN_POINT('',(0.145810546875,1.640625E-03,0.9350001));-#6802 = CARTESIAN_POINT('',(0.145810546875,1.945963541667E-02,0.9350001)- );-#6803 = CARTESIAN_POINT('',(0.151438802083,2.820963541667E-02,0.9350001)- );-#6804 = PCURVE('',#6720,#6805);-#6805 = DEFINITIONAL_REPRESENTATION('',(#6806),#6810);-#6806 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6807,#6808,#6809),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6807 = CARTESIAN_POINT('',(5.33203125E-03,3.395182291667E-02));-#6808 = CARTESIAN_POINT('',(5.33203125E-03,5.177083333334E-02));-#6809 = CARTESIAN_POINT('',(1.0960286458E-02,6.052083333334E-02));-#6810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6811 = ORIENTED_EDGE('',*,*,#6812,.T.);-#6812 = EDGE_CURVE('',#6797,#6813,#6815,.T.);-#6813 = VERTEX_POINT('',#6814);-#6814 = CARTESIAN_POINT('',(0.168551432292,3.695963541667E-02,0.9350001)- );-#6815 = SURFACE_CURVE('',#6816,(#6820),.PCURVE_S1.);-#6816 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6817,#6818,#6819),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6817 = CARTESIAN_POINT('',(0.151438802083,2.820963541667E-02,0.9350001)- );-#6818 = CARTESIAN_POINT('',(0.157067057292,3.695963541667E-02,0.9350001)- );-#6819 = CARTESIAN_POINT('',(0.168551432292,3.695963541667E-02,0.9350001)- );-#6820 = PCURVE('',#6720,#6821);-#6821 = DEFINITIONAL_REPRESENTATION('',(#6822),#6826);-#6822 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6823,#6824,#6825),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6823 = CARTESIAN_POINT('',(1.0960286458E-02,6.052083333334E-02));-#6824 = CARTESIAN_POINT('',(1.6588541667E-02,6.927083333334E-02));-#6825 = CARTESIAN_POINT('',(2.8072916667E-02,6.927083333334E-02));-#6826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6827 = ORIENTED_EDGE('',*,*,#6828,.T.);-#6828 = EDGE_CURVE('',#6813,#6829,#6831,.T.);-#6829 = VERTEX_POINT('',#6830);-#6830 = CARTESIAN_POINT('',(0.185709635417,2.820963541667E-02,0.9350001)- );-#6831 = SURFACE_CURVE('',#6832,(#6836),.PCURVE_S1.);-#6832 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6833,#6834,#6835),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6833 = CARTESIAN_POINT('',(0.168551432292,3.695963541667E-02,0.9350001)- );-#6834 = CARTESIAN_POINT('',(0.180081380208,3.695963541667E-02,0.9350001)- );-#6835 = CARTESIAN_POINT('',(0.185709635417,2.820963541667E-02,0.9350001)- );-#6836 = PCURVE('',#6720,#6837);-#6837 = DEFINITIONAL_REPRESENTATION('',(#6838),#6842);-#6838 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6839,#6840,#6841),+#5743 = SURFACE_CURVE('',#5744,(#5748),.PCURVE_S1.);+#5744 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5745,#5746,#5747), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6839 = CARTESIAN_POINT('',(2.8072916667E-02,6.927083333334E-02));-#6840 = CARTESIAN_POINT('',(3.9602864583E-02,6.927083333334E-02));-#6841 = CARTESIAN_POINT('',(4.5231119792E-02,6.052083333334E-02));-#6842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6843 = ORIENTED_EDGE('',*,*,#6844,.T.);-#6844 = EDGE_CURVE('',#6829,#6845,#6847,.T.);-#6845 = VERTEX_POINT('',#6846);-#6846 = CARTESIAN_POINT('',(0.191337890625,1.640625E-03,0.9350001));-#6847 = SURFACE_CURVE('',#6848,(#6852),.PCURVE_S1.);-#6848 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6849,#6850,#6851),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6849 = CARTESIAN_POINT('',(0.185709635417,2.820963541667E-02,0.9350001)- );-#6850 = CARTESIAN_POINT('',(0.191337890625,1.945963541667E-02,0.9350001)- );-#6851 = CARTESIAN_POINT('',(0.191337890625,1.640625E-03,0.9350001));-#6852 = PCURVE('',#6720,#6853);-#6853 = DEFINITIONAL_REPRESENTATION('',(#6854),#6858);-#6854 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6855,#6856,#6857),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6855 = CARTESIAN_POINT('',(4.5231119792E-02,6.052083333334E-02));-#6856 = CARTESIAN_POINT('',(5.0859375E-02,5.177083333334E-02));-#6857 = CARTESIAN_POINT('',(5.0859375E-02,3.395182291667E-02));-#6858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6859 = ORIENTED_EDGE('',*,*,#6860,.T.);-#6860 = EDGE_CURVE('',#6845,#6861,#6863,.T.);-#6861 = VERTEX_POINT('',#6862);-#6862 = CARTESIAN_POINT('',(0.188216145833,-1.993815104167E-02,0.9350001+#5745 = CARTESIAN_POINT('',(1.296549608822E-02,0.614518003118,0.59710515 ));-#6863 = SURFACE_CURVE('',#6864,(#6868),.PCURVE_S1.);-#6864 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6865,#6866,#6867),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6865 = CARTESIAN_POINT('',(0.191337890625,1.640625E-03,0.9350001));-#6866 = CARTESIAN_POINT('',(0.191337890625,-1.17578125E-02,0.9350001));-#6867 = CARTESIAN_POINT('',(0.188216145833,-1.993815104167E-02,0.9350001+#5746 = CARTESIAN_POINT('',(1.296549608822E-02,0.622447691411,0.59710515+ ));+#5747 = CARTESIAN_POINT('',(9.866537444987E-03,0.626458108479,0.59710515 ));-#6868 = PCURVE('',#6720,#6869);-#6869 = DEFINITIONAL_REPRESENTATION('',(#6870),#6874);-#6870 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6871,#6872,#6873),+#5748 = PCURVE('',#5374,#5749);+#5749 = DEFINITIONAL_REPRESENTATION('',(#5750),#5754);+#5750 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5751,#5752,#5753), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6871 = CARTESIAN_POINT('',(5.0859375E-02,3.395182291667E-02));-#6872 = CARTESIAN_POINT('',(5.0859375E-02,2.055338541667E-02));-#6873 = CARTESIAN_POINT('',(4.7737630208E-02,1.2373046875E-02));-#6874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#5751 = CARTESIAN_POINT('',(4.106120202279E-02,2.1829429266E-02));+#5752 = CARTESIAN_POINT('',(4.106120202279E-02,2.9759117559E-02));+#5753 = CARTESIAN_POINT('',(3.796224337956E-02,3.3769534627E-02));+#5754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6875 = ORIENTED_EDGE('',*,*,#6876,.T.);-#6876 = EDGE_CURVE('',#6861,#6877,#6879,.T.);-#6877 = VERTEX_POINT('',#6878);-#6878 = CARTESIAN_POINT('',(0.178759765625,-3.139973958333E-02,0.9350001- ));-#6879 = SURFACE_CURVE('',#6880,(#6884),.PCURVE_S1.);-#6880 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6881,#6882,#6883),+#5755 = ORIENTED_EDGE('',*,*,#5756,.T.);+#5756 = EDGE_CURVE('',#5741,#5643,#5757,.T.);+#5757 = SURFACE_CURVE('',#5758,(#5762),.PCURVE_S1.);+#5758 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5759,#5760,#5761), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6881 = CARTESIAN_POINT('',(0.188216145833,-1.993815104167E-02,0.9350001- ));-#6882 = CARTESIAN_POINT('',(0.185094401042,-2.811848958333E-02,0.9350001+#5759 = CARTESIAN_POINT('',(9.866537444987E-03,0.626458108479,0.59710515 ));-#6883 = CARTESIAN_POINT('',(0.178759765625,-3.139973958333E-02,0.9350001+#5760 = CARTESIAN_POINT('',(6.767578801758E-03,0.630468525547,0.59710515 ));-#6884 = PCURVE('',#6720,#6885);-#6885 = DEFINITIONAL_REPRESENTATION('',(#6886),#6890);-#6886 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6887,#6888,#6889),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6887 = CARTESIAN_POINT('',(4.7737630208E-02,1.2373046875E-02));-#6888 = CARTESIAN_POINT('',(4.4615885417E-02,4.19270833334E-03));-#6889 = CARTESIAN_POINT('',(3.828125E-02,9.1145833334E-04));-#6890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6891 = ORIENTED_EDGE('',*,*,#6892,.T.);-#6892 = EDGE_CURVE('',#6877,#6893,#6895,.T.);-#6893 = VERTEX_POINT('',#6894);-#6894 = CARTESIAN_POINT('',(0.187874348958,-4.005859375E-02,0.9350001));-#6895 = SURFACE_CURVE('',#6896,(#6900),.PCURVE_S1.);-#6896 = LINE('',#6897,#6898);-#6897 = CARTESIAN_POINT('',(0.178759765625,-3.139973958333E-02,0.9350001+#5761 = CARTESIAN_POINT('',(6.608073577474E-04,0.630468525547,0.59710515 ));-#6898 = VECTOR('',#6899,1.);-#6899 = DIRECTION('',(0.724999433594,-0.688749461915,0.));-#6900 = PCURVE('',#6720,#6901);-#6901 = DEFINITIONAL_REPRESENTATION('',(#6902),#6906);-#6902 = LINE('',#6903,#6904);-#6903 = CARTESIAN_POINT('',(3.828125E-02,9.1145833334E-04));-#6904 = VECTOR('',#6905,1.);-#6905 = DIRECTION('',(0.724999433594,-0.688749461915));-#6906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6907 = ORIENTED_EDGE('',*,*,#6908,.T.);-#6908 = EDGE_CURVE('',#6893,#6710,#6909,.T.);-#6909 = SURFACE_CURVE('',#6910,(#6914),.PCURVE_S1.);-#6910 = LINE('',#6911,#6912);-#6911 = CARTESIAN_POINT('',(0.187874348958,-4.005859375E-02,0.9350001));-#6912 = VECTOR('',#6913,1.);-#6913 = DIRECTION('',(-0.83374531243,-0.55214921353,0.));-#6914 = PCURVE('',#6720,#6915);-#6915 = DEFINITIONAL_REPRESENTATION('',(#6916),#6920);-#6916 = LINE('',#6917,#6918);-#6917 = CARTESIAN_POINT('',(4.7395833333E-02,-7.74739583333E-03));-#6918 = VECTOR('',#6919,1.);-#6919 = DIRECTION('',(-0.83374531243,-0.55214921353));-#6920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6921 = FACE_BOUND('',#6922,.F.);-#6922 = EDGE_LOOP('',(#6923,#6941,#6957,#6973,#6989,#7005,#7021,#7037));-#6923 = ORIENTED_EDGE('',*,*,#6924,.T.);-#6924 = EDGE_CURVE('',#6925,#6927,#6929,.T.);-#6925 = VERTEX_POINT('',#6926);-#6926 = CARTESIAN_POINT('',(0.181722005208,1.640625E-03,0.9350001));-#6927 = VERTEX_POINT('',#6928);-#6928 = CARTESIAN_POINT('',(0.178645833333,2.305989583333E-02,0.9350001)- );-#6929 = SURFACE_CURVE('',#6930,(#6934),.PCURVE_S1.);-#6930 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6931,#6932,#6933),+#5762 = PCURVE('',#5374,#5763);+#5763 = DEFINITIONAL_REPRESENTATION('',(#5764),#5768);+#5764 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5765,#5766,#5767), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6931 = CARTESIAN_POINT('',(0.181722005208,1.640625E-03,0.9350001));-#6932 = CARTESIAN_POINT('',(0.181722005208,1.663411458333E-02,0.9350001)+#5765 = CARTESIAN_POINT('',(3.796224337956E-02,3.3769534627E-02));+#5766 = CARTESIAN_POINT('',(3.486328473633E-02,3.7779951695E-02));+#5767 = CARTESIAN_POINT('',(2.875651329232E-02,3.7779951695E-02));+#5768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5769 = SHELL_BASED_SURFACE_MODEL('',(#5770));+#5770 = OPEN_SHELL('',(#5771));+#5771 = ADVANCED_FACE('',(#5772),#5786,.T.);+#5772 = FACE_BOUND('',#5773,.F.);+#5773 = EDGE_LOOP('',(#5774,#5797,#5813,#5829,#5845,#5861,#5877,#5893,+ #5909,#5925,#5941,#5957,#5973));+#5774 = ORIENTED_EDGE('',*,*,#5775,.T.);+#5775 = EDGE_CURVE('',#5776,#5778,#5780,.T.);+#5776 = VERTEX_POINT('',#5777);+#5777 = CARTESIAN_POINT('',(3.201497715983E-02,0.592688573852,0.59710515+ ));+#5778 = VERTEX_POINT('',#5779);+#5779 = CARTESIAN_POINT('',(3.201497715983E-02,0.66072894524,0.59710515) );-#6933 = CARTESIAN_POINT('',(0.178645833333,2.305989583333E-02,0.9350001)+#5780 = SURFACE_CURVE('',#5781,(#5785),.PCURVE_S1.);+#5781 = LINE('',#5782,#5783);+#5782 = CARTESIAN_POINT('',(3.201497715983E-02,0.592688573852,0.59710515+ ));+#5783 = VECTOR('',#5784,1.);+#5784 = DIRECTION('',(0.,1.,0.));+#5785 = PCURVE('',#5786,#5791);+#5786 = PLANE('',#5787);+#5787 = AXIS2_PLACEMENT_3D('',#5788,#5789,#5790);+#5788 = CARTESIAN_POINT('',(2.809570593457E-02,0.592688573852,0.59710515+ ));+#5789 = DIRECTION('',(0.,0.,1.));+#5790 = DIRECTION('',(1.,0.,-0.));+#5791 = DEFINITIONAL_REPRESENTATION('',(#5792),#5796);+#5792 = LINE('',#5793,#5794);+#5793 = CARTESIAN_POINT('',(3.91927122526E-03,0.));+#5794 = VECTOR('',#5795,1.);+#5795 = DIRECTION('',(0.,1.));+#5796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5797 = ORIENTED_EDGE('',*,*,#5798,.T.);+#5798 = EDGE_CURVE('',#5778,#5799,#5801,.T.);+#5799 = VERTEX_POINT('',#5800);+#5800 = CARTESIAN_POINT('',(4.43196658903E-02,0.66072894524,0.59710515) );-#6934 = PCURVE('',#6720,#6935);-#6935 = DEFINITIONAL_REPRESENTATION('',(#6936),#6940);-#6936 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6937,#6938,#6939),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6937 = CARTESIAN_POINT('',(4.1243489583E-02,3.395182291667E-02));-#6938 = CARTESIAN_POINT('',(4.1243489583E-02,4.89453125E-02));-#6939 = CARTESIAN_POINT('',(3.8167317708E-02,5.537109375E-02));-#6940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6941 = ORIENTED_EDGE('',*,*,#6942,.T.);-#6942 = EDGE_CURVE('',#6927,#6943,#6945,.T.);-#6943 = VERTEX_POINT('',#6944);-#6944 = CARTESIAN_POINT('',(0.168551432292,2.948567708333E-02,0.9350001)+#5801 = SURFACE_CURVE('',#5802,(#5806),.PCURVE_S1.);+#5802 = LINE('',#5803,#5804);+#5803 = CARTESIAN_POINT('',(3.201497715983E-02,0.66072894524,0.59710515) );-#6945 = SURFACE_CURVE('',#6946,(#6950),.PCURVE_S1.);-#6946 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6947,#6948,#6949),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6947 = CARTESIAN_POINT('',(0.178645833333,2.305989583333E-02,0.9350001)+#5804 = VECTOR('',#5805,1.);+#5805 = DIRECTION('',(1.,0.,0.));+#5806 = PCURVE('',#5786,#5807);+#5807 = DEFINITIONAL_REPRESENTATION('',(#5808),#5812);+#5808 = LINE('',#5809,#5810);+#5809 = CARTESIAN_POINT('',(3.91927122526E-03,6.8040371388E-02));+#5810 = VECTOR('',#5811,1.);+#5811 = DIRECTION('',(1.,0.));+#5812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5813 = ORIENTED_EDGE('',*,*,#5814,.T.);+#5814 = EDGE_CURVE('',#5799,#5815,#5817,.T.);+#5815 = VERTEX_POINT('',#5816);+#5816 = CARTESIAN_POINT('',(5.607747956608E-02,0.626093525109,0.59710515+ ));+#5817 = SURFACE_CURVE('',#5818,(#5822),.PCURVE_S1.);+#5818 = LINE('',#5819,#5820);+#5819 = CARTESIAN_POINT('',(4.43196658903E-02,0.66072894524,0.59710515) );-#6948 = CARTESIAN_POINT('',(0.175569661458,2.948567708333E-02,0.9350001)+#5820 = VECTOR('',#5821,1.);+#5821 = DIRECTION('',(0.321455959028,-0.94692453047,0.));+#5822 = PCURVE('',#5786,#5823);+#5823 = DEFINITIONAL_REPRESENTATION('',(#5824),#5828);+#5824 = LINE('',#5825,#5826);+#5825 = CARTESIAN_POINT('',(1.622395995573E-02,6.8040371388E-02));+#5826 = VECTOR('',#5827,1.);+#5827 = DIRECTION('',(0.321455959028,-0.94692453047));+#5828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5829 = ORIENTED_EDGE('',*,*,#5830,.T.);+#5830 = EDGE_CURVE('',#5815,#5831,#5833,.T.);+#5831 = VERTEX_POINT('',#5832);+#5832 = CARTESIAN_POINT('',(6.792643908431E-02,0.66072894524,0.59710515) );-#6949 = CARTESIAN_POINT('',(0.168551432292,2.948567708333E-02,0.9350001)+#5833 = SURFACE_CURVE('',#5834,(#5838),.PCURVE_S1.);+#5834 = LINE('',#5835,#5836);+#5835 = CARTESIAN_POINT('',(5.607747956608E-02,0.626093525109,0.59710515+ ));+#5836 = VECTOR('',#5837,1.);+#5837 = DIRECTION('',(0.323687679063,0.946163984953,0.));+#5838 = PCURVE('',#5786,#5839);+#5839 = DEFINITIONAL_REPRESENTATION('',(#5840),#5844);+#5840 = LINE('',#5841,#5842);+#5841 = CARTESIAN_POINT('',(2.798177363151E-02,3.3404951257E-02));+#5842 = VECTOR('',#5843,1.);+#5843 = DIRECTION('',(0.323687679063,0.946163984953));+#5844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5845 = ORIENTED_EDGE('',*,*,#5846,.T.);+#5846 = EDGE_CURVE('',#5831,#5847,#5849,.T.);+#5847 = VERTEX_POINT('',#5848);+#5848 = CARTESIAN_POINT('',(8.0276700736E-02,0.66072894524,0.59710515));+#5849 = SURFACE_CURVE('',#5850,(#5854),.PCURVE_S1.);+#5850 = LINE('',#5851,#5852);+#5851 = CARTESIAN_POINT('',(6.792643908431E-02,0.66072894524,0.59710515) );-#6950 = PCURVE('',#6720,#6951);-#6951 = DEFINITIONAL_REPRESENTATION('',(#6952),#6956);-#6952 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6953,#6954,#6955),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6953 = CARTESIAN_POINT('',(3.8167317708E-02,5.537109375E-02));-#6954 = CARTESIAN_POINT('',(3.5091145833E-02,6.1796875E-02));-#6955 = CARTESIAN_POINT('',(2.8072916667E-02,6.1796875E-02));-#6956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6957 = ORIENTED_EDGE('',*,*,#6958,.T.);-#6958 = EDGE_CURVE('',#6943,#6959,#6961,.T.);-#6959 = VERTEX_POINT('',#6960);-#6960 = CARTESIAN_POINT('',(0.158502604167,2.305989583333E-02,0.9350001)+#5852 = VECTOR('',#5853,1.);+#5853 = DIRECTION('',(1.,0.,0.));+#5854 = PCURVE('',#5786,#5855);+#5855 = DEFINITIONAL_REPRESENTATION('',(#5856),#5860);+#5856 = LINE('',#5857,#5858);+#5857 = CARTESIAN_POINT('',(3.983073314974E-02,6.8040371388E-02));+#5858 = VECTOR('',#5859,1.);+#5859 = DIRECTION('',(1.,0.));+#5860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5861 = ORIENTED_EDGE('',*,*,#5862,.T.);+#5862 = EDGE_CURVE('',#5847,#5863,#5865,.T.);+#5863 = VERTEX_POINT('',#5864);+#5864 = CARTESIAN_POINT('',(8.0276700736E-02,0.592688573852,0.59710515) );-#6961 = SURFACE_CURVE('',#6962,(#6966),.PCURVE_S1.);-#6962 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6963,#6964,#6965),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6963 = CARTESIAN_POINT('',(0.168551432292,2.948567708333E-02,0.9350001)+#5865 = SURFACE_CURVE('',#5866,(#5870),.PCURVE_S1.);+#5866 = LINE('',#5867,#5868);+#5867 = CARTESIAN_POINT('',(8.0276700736E-02,0.66072894524,0.59710515));+#5868 = VECTOR('',#5869,1.);+#5869 = DIRECTION('',(0.,-1.,0.));+#5870 = PCURVE('',#5786,#5871);+#5871 = DEFINITIONAL_REPRESENTATION('',(#5872),#5876);+#5872 = LINE('',#5873,#5874);+#5873 = CARTESIAN_POINT('',(5.218099480143E-02,6.8040371388E-02));+#5874 = VECTOR('',#5875,1.);+#5875 = DIRECTION('',(0.,-1.));+#5876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5877 = ORIENTED_EDGE('',*,*,#5878,.T.);+#5878 = EDGE_CURVE('',#5863,#5879,#5881,.T.);+#5879 = VERTEX_POINT('',#5880);+#5880 = CARTESIAN_POINT('',(7.175456446712E-02,0.592688573852,0.59710515+ ));+#5881 = SURFACE_CURVE('',#5882,(#5886),.PCURVE_S1.);+#5882 = LINE('',#5883,#5884);+#5883 = CARTESIAN_POINT('',(8.0276700736E-02,0.592688573852,0.59710515) );-#6964 = CARTESIAN_POINT('',(0.161578776042,2.948567708333E-02,0.9350001)+#5884 = VECTOR('',#5885,1.);+#5885 = DIRECTION('',(-1.,0.,0.));+#5886 = PCURVE('',#5786,#5887);+#5887 = DEFINITIONAL_REPRESENTATION('',(#5888),#5892);+#5888 = LINE('',#5889,#5890);+#5889 = CARTESIAN_POINT('',(5.218099480143E-02,0.));+#5890 = VECTOR('',#5891,1.);+#5891 = DIRECTION('',(-1.,0.));+#5892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5893 = ORIENTED_EDGE('',*,*,#5894,.T.);+#5894 = EDGE_CURVE('',#5879,#5895,#5897,.T.);+#5895 = VERTEX_POINT('',#5896);+#5896 = CARTESIAN_POINT('',(7.175456446712E-02,0.652799256947,0.59710515+ ));+#5897 = SURFACE_CURVE('',#5898,(#5902),.PCURVE_S1.);+#5898 = LINE('',#5899,#5900);+#5899 = CARTESIAN_POINT('',(7.175456446712E-02,0.592688573852,0.59710515+ ));+#5900 = VECTOR('',#5901,1.);+#5901 = DIRECTION('',(0.,1.,0.));+#5902 = PCURVE('',#5786,#5903);+#5903 = DEFINITIONAL_REPRESENTATION('',(#5904),#5908);+#5904 = LINE('',#5905,#5906);+#5905 = CARTESIAN_POINT('',(4.365885853255E-02,0.));+#5906 = VECTOR('',#5907,1.);+#5907 = DIRECTION('',(0.,1.));+#5908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5909 = ORIENTED_EDGE('',*,*,#5910,.T.);+#5910 = EDGE_CURVE('',#5895,#5911,#5913,.T.);+#5911 = VERTEX_POINT('',#5912);+#5912 = CARTESIAN_POINT('',(5.963216742155E-02,0.616933367943,0.59710515+ ));+#5913 = SURFACE_CURVE('',#5914,(#5918),.PCURVE_S1.);+#5914 = LINE('',#5915,#5916);+#5915 = CARTESIAN_POINT('',(7.175456446712E-02,0.652799256947,0.59710515+ ));+#5916 = VECTOR('',#5917,1.);+#5917 = DIRECTION('',(-0.320197367137,-0.947350856905,0.));+#5918 = PCURVE('',#5786,#5919);+#5919 = DEFINITIONAL_REPRESENTATION('',(#5920),#5924);+#5920 = LINE('',#5921,#5922);+#5921 = CARTESIAN_POINT('',(4.365885853255E-02,6.0110683095E-02));+#5922 = VECTOR('',#5923,1.);+#5923 = DIRECTION('',(-0.320197367137,-0.947350856905));+#5924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5925 = ORIENTED_EDGE('',*,*,#5926,.T.);+#5926 = EDGE_CURVE('',#5911,#5927,#5929,.T.);+#5927 = VERTEX_POINT('',#5928);+#5928 = CARTESIAN_POINT('',(5.265951047428E-02,0.616933367943,0.59710515+ ));+#5929 = SURFACE_CURVE('',#5930,(#5934),.PCURVE_S1.);+#5930 = LINE('',#5931,#5932);+#5931 = CARTESIAN_POINT('',(5.963216742155E-02,0.616933367943,0.59710515+ ));+#5932 = VECTOR('',#5933,1.);+#5933 = DIRECTION('',(-1.,0.,0.));+#5934 = PCURVE('',#5786,#5935);+#5935 = DEFINITIONAL_REPRESENTATION('',(#5936),#5940);+#5936 = LINE('',#5937,#5938);+#5937 = CARTESIAN_POINT('',(3.153646148698E-02,2.4244794091E-02));+#5938 = VECTOR('',#5939,1.);+#5939 = DIRECTION('',(-1.,0.));+#5940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5941 = ORIENTED_EDGE('',*,*,#5942,.T.);+#5942 = EDGE_CURVE('',#5927,#5943,#5945,.T.);+#5943 = VERTEX_POINT('',#5944);+#5944 = CARTESIAN_POINT('',(4.049154050749E-02,0.652799256947,0.59710515+ ));+#5945 = SURFACE_CURVE('',#5946,(#5950),.PCURVE_S1.);+#5946 = LINE('',#5947,#5948);+#5947 = CARTESIAN_POINT('',(5.265951047428E-02,0.616933367943,0.59710515+ ));+#5948 = VECTOR('',#5949,1.);+#5949 = DIRECTION('',(-0.321277075608,0.946985237841,0.));+#5950 = PCURVE('',#5786,#5951);+#5951 = DEFINITIONAL_REPRESENTATION('',(#5952),#5956);+#5952 = LINE('',#5953,#5954);+#5953 = CARTESIAN_POINT('',(2.456380453971E-02,2.4244794091E-02));+#5954 = VECTOR('',#5955,1.);+#5955 = DIRECTION('',(-0.321277075608,0.946985237841));+#5956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5957 = ORIENTED_EDGE('',*,*,#5958,.T.);+#5958 = EDGE_CURVE('',#5943,#5959,#5961,.T.);+#5959 = VERTEX_POINT('',#5960);+#5960 = CARTESIAN_POINT('',(4.049154050749E-02,0.592688573852,0.59710515+ ));+#5961 = SURFACE_CURVE('',#5962,(#5966),.PCURVE_S1.);+#5962 = LINE('',#5963,#5964);+#5963 = CARTESIAN_POINT('',(4.049154050749E-02,0.652799256947,0.59710515+ ));+#5964 = VECTOR('',#5965,1.);+#5965 = DIRECTION('',(0.,-1.,0.));+#5966 = PCURVE('',#5786,#5967);+#5967 = DEFINITIONAL_REPRESENTATION('',(#5968),#5972);+#5968 = LINE('',#5969,#5970);+#5969 = CARTESIAN_POINT('',(1.239583457292E-02,6.0110683095E-02));+#5970 = VECTOR('',#5971,1.);+#5971 = DIRECTION('',(0.,-1.));+#5972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5973 = ORIENTED_EDGE('',*,*,#5974,.T.);+#5974 = EDGE_CURVE('',#5959,#5776,#5975,.T.);+#5975 = SURFACE_CURVE('',#5976,(#5980),.PCURVE_S1.);+#5976 = LINE('',#5977,#5978);+#5977 = CARTESIAN_POINT('',(4.049154050749E-02,0.592688573852,0.59710515+ ));+#5978 = VECTOR('',#5979,1.);+#5979 = DIRECTION('',(-1.,0.,0.));+#5980 = PCURVE('',#5786,#5981);+#5981 = DEFINITIONAL_REPRESENTATION('',(#5982),#5986);+#5982 = LINE('',#5983,#5984);+#5983 = CARTESIAN_POINT('',(1.239583457292E-02,0.));+#5984 = VECTOR('',#5985,1.);+#5985 = DIRECTION('',(-1.,0.));+#5986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5987 = SHELL_BASED_SURFACE_MODEL('',(#5988));+#5988 = OPEN_SHELL('',(#5989));+#5989 = ADVANCED_FACE('',(#5990,#6141),#6004,.T.);+#5990 = FACE_BOUND('',#5991,.F.);+#5991 = EDGE_LOOP('',(#5992,#6015,#6031,#6047,#6063,#6079,#6095,#6111,+ #6127));+#5992 = ORIENTED_EDGE('',*,*,#5993,.T.);+#5993 = EDGE_CURVE('',#5994,#5996,#5998,.T.);+#5994 = VERTEX_POINT('',#5995);+#5995 = CARTESIAN_POINT('',(9.326498328483E-02,0.592688573852,0.59710515+ ));+#5996 = VERTEX_POINT('',#5997);+#5997 = CARTESIAN_POINT('',(9.326498328483E-02,0.66072894524,0.59710515) );-#6965 = CARTESIAN_POINT('',(0.158502604167,2.305989583333E-02,0.9350001)+#5998 = SURFACE_CURVE('',#5999,(#6003),.PCURVE_S1.);+#5999 = LINE('',#6000,#6001);+#6000 = CARTESIAN_POINT('',(9.326498328483E-02,0.592688573852,0.59710515+ ));+#6001 = VECTOR('',#6002,1.);+#6002 = DIRECTION('',(0.,1.,0.));+#6003 = PCURVE('',#6004,#6009);+#6004 = PLANE('',#6005);+#6005 = AXIS2_PLACEMENT_3D('',#6006,#6007,#6008);+#6006 = CARTESIAN_POINT('',(8.428711780371E-02,0.592688573852,0.59710515+ ));+#6007 = DIRECTION('',(0.,0.,1.));+#6008 = DIRECTION('',(1.,0.,-0.));+#6009 = DEFINITIONAL_REPRESENTATION('',(#6010),#6014);+#6010 = LINE('',#6011,#6012);+#6011 = CARTESIAN_POINT('',(8.97786548112E-03,0.));+#6012 = VECTOR('',#6013,1.);+#6013 = DIRECTION('',(0.,1.));+#6014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6015 = ORIENTED_EDGE('',*,*,#6016,.T.);+#6016 = EDGE_CURVE('',#5996,#6017,#6019,.T.);+#6017 = VERTEX_POINT('',#6018);+#6018 = CARTESIAN_POINT('',(0.113134776938,0.66072894524,0.59710515));+#6019 = SURFACE_CURVE('',#6020,(#6024),.PCURVE_S1.);+#6020 = LINE('',#6021,#6022);+#6021 = CARTESIAN_POINT('',(9.326498328483E-02,0.66072894524,0.59710515) );-#6966 = PCURVE('',#6720,#6967);-#6967 = DEFINITIONAL_REPRESENTATION('',(#6968),#6972);-#6968 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6969,#6970,#6971),+#6022 = VECTOR('',#6023,1.);+#6023 = DIRECTION('',(1.,0.,0.));+#6024 = PCURVE('',#6004,#6025);+#6025 = DEFINITIONAL_REPRESENTATION('',(#6026),#6030);+#6026 = LINE('',#6027,#6028);+#6027 = CARTESIAN_POINT('',(8.97786548112E-03,6.8040371388E-02));+#6028 = VECTOR('',#6029,1.);+#6029 = DIRECTION('',(1.,0.));+#6030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6031 = ORIENTED_EDGE('',*,*,#6032,.T.);+#6032 = EDGE_CURVE('',#6017,#6033,#6035,.T.);+#6033 = VERTEX_POINT('',#6034);+#6034 = CARTESIAN_POINT('',(0.130406914082,0.655556418681,0.59710515));+#6035 = SURFACE_CURVE('',#6036,(#6040),.PCURVE_S1.);+#6036 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6037,#6038,#6039), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6969 = CARTESIAN_POINT('',(2.8072916667E-02,6.1796875E-02));-#6970 = CARTESIAN_POINT('',(2.1100260417E-02,6.1796875E-02));-#6971 = CARTESIAN_POINT('',(1.8024088542E-02,5.537109375E-02));-#6972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6973 = ORIENTED_EDGE('',*,*,#6974,.T.);-#6974 = EDGE_CURVE('',#6959,#6975,#6977,.T.);-#6975 = VERTEX_POINT('',#6976);-#6976 = CARTESIAN_POINT('',(0.155426432292,1.640625E-03,0.9350001));-#6977 = SURFACE_CURVE('',#6978,(#6982),.PCURVE_S1.);-#6978 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6979,#6980,#6981),+#6037 = CARTESIAN_POINT('',(0.113134776938,0.66072894524,0.59710515));+#6038 = CARTESIAN_POINT('',(0.124528007244,0.66072894524,0.59710515));+#6039 = CARTESIAN_POINT('',(0.130406914082,0.655556418681,0.59710515));+#6040 = PCURVE('',#6004,#6041);+#6041 = DEFINITIONAL_REPRESENTATION('',(#6042),#6046);+#6042 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6043,#6044,#6045), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6979 = CARTESIAN_POINT('',(0.158502604167,2.305989583333E-02,0.9350001)- );-#6980 = CARTESIAN_POINT('',(0.155426432292,1.663411458333E-02,0.9350001)- );-#6981 = CARTESIAN_POINT('',(0.155426432292,1.640625E-03,0.9350001));-#6982 = PCURVE('',#6720,#6983);-#6983 = DEFINITIONAL_REPRESENTATION('',(#6984),#6988);-#6984 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6985,#6986,#6987),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6985 = CARTESIAN_POINT('',(1.8024088542E-02,5.537109375E-02));-#6986 = CARTESIAN_POINT('',(1.4947916667E-02,4.89453125E-02));-#6987 = CARTESIAN_POINT('',(1.4947916667E-02,3.395182291667E-02));-#6988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#6043 = CARTESIAN_POINT('',(2.884765913429E-02,6.8040371388E-02));+#6044 = CARTESIAN_POINT('',(4.024088944029E-02,6.8040371388E-02));+#6045 = CARTESIAN_POINT('',(4.611979627829E-02,6.2867844829E-02));+#6046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6989 = ORIENTED_EDGE('',*,*,#6990,.T.);-#6990 = EDGE_CURVE('',#6975,#6991,#6993,.T.);-#6991 = VERTEX_POINT('',#6992);-#6992 = CARTESIAN_POINT('',(0.158502604167,-1.973307291667E-02,0.9350001- ));-#6993 = SURFACE_CURVE('',#6994,(#6998),.PCURVE_S1.);-#6994 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6995,#6996,#6997),+#6047 = ORIENTED_EDGE('',*,*,#6048,.T.);+#6048 = EDGE_CURVE('',#6033,#6049,#6051,.T.);+#6049 = VERTEX_POINT('',#6050);+#6050 = CARTESIAN_POINT('',(0.13628582092,0.640403422374,0.59710515));+#6051 = SURFACE_CURVE('',#6052,(#6056),.PCURVE_S1.);+#6052 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6053,#6054,#6055), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6995 = CARTESIAN_POINT('',(0.155426432292,1.640625E-03,0.9350001));-#6996 = CARTESIAN_POINT('',(0.155426432292,-1.330729166667E-02,0.9350001- ));-#6997 = CARTESIAN_POINT('',(0.158502604167,-1.973307291667E-02,0.9350001- ));-#6998 = PCURVE('',#6720,#6999);-#6999 = DEFINITIONAL_REPRESENTATION('',(#7000),#7004);-#7000 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7001,#7002,#7003),+#6053 = CARTESIAN_POINT('',(0.130406914082,0.655556418681,0.59710515));+#6054 = CARTESIAN_POINT('',(0.13628582092,0.650383892122,0.59710515));+#6055 = CARTESIAN_POINT('',(0.13628582092,0.640403422374,0.59710515));+#6056 = PCURVE('',#6004,#6057);+#6057 = DEFINITIONAL_REPRESENTATION('',(#6058),#6062);+#6058 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6059,#6060,#6061), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#7001 = CARTESIAN_POINT('',(1.4947916667E-02,3.395182291667E-02));-#7002 = CARTESIAN_POINT('',(1.4947916667E-02,1.900390625E-02));-#7003 = CARTESIAN_POINT('',(1.8024088542E-02,1.2578125E-02));-#7004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#6059 = CARTESIAN_POINT('',(4.611979627829E-02,6.2867844829E-02));+#6060 = CARTESIAN_POINT('',(5.199870311629E-02,5.769531827E-02));+#6061 = CARTESIAN_POINT('',(5.199870311629E-02,4.7714848522E-02));+#6062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7005 = ORIENTED_EDGE('',*,*,#7006,.T.);-#7006 = EDGE_CURVE('',#6991,#7007,#7009,.T.);-#7007 = VERTEX_POINT('',#7008);-#7008 = CARTESIAN_POINT('',(0.168551432292,-2.615885416667E-02,0.9350001- ));-#7009 = SURFACE_CURVE('',#7010,(#7014),.PCURVE_S1.);-#7010 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7011,#7012,#7013),+#6063 = ORIENTED_EDGE('',*,*,#6064,.T.);+#6064 = EDGE_CURVE('',#6049,#6065,#6067,.T.);+#6065 = VERTEX_POINT('',#6066);+#6066 = CARTESIAN_POINT('',(0.130429700543,0.625182066685,0.59710515));+#6067 = SURFACE_CURVE('',#6068,(#6072),.PCURVE_S1.);+#6068 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6069,#6070,#6071), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#7011 = CARTESIAN_POINT('',(0.158502604167,-1.973307291667E-02,0.9350001- ));-#7012 = CARTESIAN_POINT('',(0.161578776042,-2.615885416667E-02,0.9350001- ));-#7013 = CARTESIAN_POINT('',(0.168551432292,-2.615885416667E-02,0.9350001- ));-#7014 = PCURVE('',#6720,#7015);-#7015 = DEFINITIONAL_REPRESENTATION('',(#7016),#7020);-#7016 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7017,#7018,#7019),+#6069 = CARTESIAN_POINT('',(0.13628582092,0.640403422374,0.59710515));+#6070 = CARTESIAN_POINT('',(0.13628582092,0.630331806783,0.59710515));+#6071 = CARTESIAN_POINT('',(0.130429700543,0.625182066685,0.59710515));+#6072 = PCURVE('',#6004,#6073);+#6073 = DEFINITIONAL_REPRESENTATION('',(#6074),#6078);+#6074 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6075,#6076,#6077),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6075 = CARTESIAN_POINT('',(5.199870311629E-02,4.7714848522E-02));+#6076 = CARTESIAN_POINT('',(5.199870311629E-02,3.7643232931E-02));+#6077 = CARTESIAN_POINT('',(4.614258273929E-02,3.2493492833E-02));+#6078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6079 = ORIENTED_EDGE('',*,*,#6080,.T.);+#6080 = EDGE_CURVE('',#6065,#6081,#6083,.T.);+#6081 = VERTEX_POINT('',#6082);+#6082 = CARTESIAN_POINT('',(0.113134776938,0.620032326587,0.59710515));+#6083 = SURFACE_CURVE('',#6084,(#6088),.PCURVE_S1.);+#6084 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6085,#6086,#6087),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6085 = CARTESIAN_POINT('',(0.130429700543,0.625182066685,0.59710515));+#6086 = CARTESIAN_POINT('',(0.124573580166,0.620032326587,0.59710515));+#6087 = CARTESIAN_POINT('',(0.113134776938,0.620032326587,0.59710515));+#6088 = PCURVE('',#6004,#6089);+#6089 = DEFINITIONAL_REPRESENTATION('',(#6090),#6094);+#6090 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6091,#6092,#6093),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6091 = CARTESIAN_POINT('',(4.614258273929E-02,3.2493492833E-02));+#6092 = CARTESIAN_POINT('',(4.028646236229E-02,2.7343752735E-02));+#6093 = CARTESIAN_POINT('',(2.884765913429E-02,2.7343752735E-02));+#6094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6095 = ORIENTED_EDGE('',*,*,#6096,.T.);+#6096 = EDGE_CURVE('',#6081,#6097,#6099,.T.);+#6097 = VERTEX_POINT('',#6098);+#6098 = CARTESIAN_POINT('',(0.102470713372,0.620032326587,0.59710515));+#6099 = SURFACE_CURVE('',#6100,(#6104),.PCURVE_S1.);+#6100 = LINE('',#6101,#6102);+#6101 = CARTESIAN_POINT('',(0.113134776938,0.620032326587,0.59710515));+#6102 = VECTOR('',#6103,1.);+#6103 = DIRECTION('',(-1.,0.,0.));+#6104 = PCURVE('',#6004,#6105);+#6105 = DEFINITIONAL_REPRESENTATION('',(#6106),#6110);+#6106 = LINE('',#6107,#6108);+#6107 = CARTESIAN_POINT('',(2.884765913429E-02,2.7343752735E-02));+#6108 = VECTOR('',#6109,1.);+#6109 = DIRECTION('',(-1.,0.));+#6110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6111 = ORIENTED_EDGE('',*,*,#6112,.T.);+#6112 = EDGE_CURVE('',#6097,#6113,#6115,.T.);+#6113 = VERTEX_POINT('',#6114);+#6114 = CARTESIAN_POINT('',(0.102470713372,0.592688573852,0.59710515));+#6115 = SURFACE_CURVE('',#6116,(#6120),.PCURVE_S1.);+#6116 = LINE('',#6117,#6118);+#6117 = CARTESIAN_POINT('',(0.102470713372,0.620032326587,0.59710515));+#6118 = VECTOR('',#6119,1.);+#6119 = DIRECTION('',(0.,-1.,0.));+#6120 = PCURVE('',#6004,#6121);+#6121 = DEFINITIONAL_REPRESENTATION('',(#6122),#6126);+#6122 = LINE('',#6123,#6124);+#6123 = CARTESIAN_POINT('',(1.818359556829E-02,2.7343752735E-02));+#6124 = VECTOR('',#6125,1.);+#6125 = DIRECTION('',(0.,-1.));+#6126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6127 = ORIENTED_EDGE('',*,*,#6128,.T.);+#6128 = EDGE_CURVE('',#6113,#5994,#6129,.T.);+#6129 = SURFACE_CURVE('',#6130,(#6134),.PCURVE_S1.);+#6130 = LINE('',#6131,#6132);+#6131 = CARTESIAN_POINT('',(0.102470713372,0.592688573852,0.59710515));+#6132 = VECTOR('',#6133,1.);+#6133 = DIRECTION('',(-1.,0.,0.));+#6134 = PCURVE('',#6004,#6135);+#6135 = DEFINITIONAL_REPRESENTATION('',(#6136),#6140);+#6136 = LINE('',#6137,#6138);+#6137 = CARTESIAN_POINT('',(1.818359556829E-02,0.));+#6138 = VECTOR('',#6139,1.);+#6139 = DIRECTION('',(-1.,0.));+#6140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6141 = FACE_BOUND('',#6142,.F.);+#6142 = EDGE_LOOP('',(#6143,#6161,#6177,#6193,#6209,#6225,#6241));+#6143 = ORIENTED_EDGE('',*,*,#6144,.T.);+#6144 = EDGE_CURVE('',#6145,#6147,#6149,.T.);+#6145 = VERTEX_POINT('',#6146);+#6146 = CARTESIAN_POINT('',(0.113134776938,0.653163840316,0.59710515));+#6147 = VERTEX_POINT('',#6148);+#6148 = CARTESIAN_POINT('',(0.102470713372,0.653163840316,0.59710515));+#6149 = SURFACE_CURVE('',#6150,(#6154),.PCURVE_S1.);+#6150 = LINE('',#6151,#6152);+#6151 = CARTESIAN_POINT('',(0.113134776938,0.653163840316,0.59710515));+#6152 = VECTOR('',#6153,1.);+#6153 = DIRECTION('',(-1.,0.,0.));+#6154 = PCURVE('',#6004,#6155);+#6155 = DEFINITIONAL_REPRESENTATION('',(#6156),#6160);+#6156 = LINE('',#6157,#6158);+#6157 = CARTESIAN_POINT('',(2.884765913429E-02,6.0475266464E-02));+#6158 = VECTOR('',#6159,1.);+#6159 = DIRECTION('',(-1.,0.));+#6160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6161 = ORIENTED_EDGE('',*,*,#6162,.T.);+#6162 = EDGE_CURVE('',#6147,#6163,#6165,.T.);+#6163 = VERTEX_POINT('',#6164);+#6164 = CARTESIAN_POINT('',(0.102470713372,0.62759743151,0.59710515));+#6165 = SURFACE_CURVE('',#6166,(#6170),.PCURVE_S1.);+#6166 = LINE('',#6167,#6168);+#6167 = CARTESIAN_POINT('',(0.102470713372,0.653163840316,0.59710515));+#6168 = VECTOR('',#6169,1.);+#6169 = DIRECTION('',(0.,-1.,0.));+#6170 = PCURVE('',#6004,#6171);+#6171 = DEFINITIONAL_REPRESENTATION('',(#6172),#6176);+#6172 = LINE('',#6173,#6174);+#6173 = CARTESIAN_POINT('',(1.818359556829E-02,6.0475266464E-02));+#6174 = VECTOR('',#6175,1.);+#6175 = DIRECTION('',(0.,-1.));+#6176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6177 = ORIENTED_EDGE('',*,*,#6178,.T.);+#6178 = EDGE_CURVE('',#6163,#6179,#6181,.T.);+#6179 = VERTEX_POINT('',#6180);+#6180 = CARTESIAN_POINT('',(0.113134776938,0.62759743151,0.59710515));+#6181 = SURFACE_CURVE('',#6182,(#6186),.PCURVE_S1.);+#6182 = LINE('',#6183,#6184);+#6183 = CARTESIAN_POINT('',(0.102470713372,0.62759743151,0.59710515));+#6184 = VECTOR('',#6185,1.);+#6185 = DIRECTION('',(1.,0.,0.));+#6186 = PCURVE('',#6004,#6187);+#6187 = DEFINITIONAL_REPRESENTATION('',(#6188),#6192);+#6188 = LINE('',#6189,#6190);+#6189 = CARTESIAN_POINT('',(1.818359556829E-02,3.4908857658E-02));+#6190 = VECTOR('',#6191,1.);+#6191 = DIRECTION('',(1.,0.));+#6192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6193 = ORIENTED_EDGE('',*,*,#6194,.T.);+#6194 = EDGE_CURVE('',#6179,#6195,#6197,.T.);+#6195 = VERTEX_POINT('',#6196);+#6196 = CARTESIAN_POINT('',(0.123092460226,0.63096982768,0.59710515));+#6197 = SURFACE_CURVE('',#6198,(#6202),.PCURVE_S1.);+#6198 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6199,#6200,#6201), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#7017 = CARTESIAN_POINT('',(1.8024088542E-02,1.2578125E-02));-#7018 = CARTESIAN_POINT('',(2.1100260417E-02,6.15234375E-03));-#7019 = CARTESIAN_POINT('',(2.8072916667E-02,6.15234375E-03));-#7020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7021 = ORIENTED_EDGE('',*,*,#7022,.T.);-#7022 = EDGE_CURVE('',#7007,#7023,#7025,.T.);-#7023 = VERTEX_POINT('',#7024);-#7024 = CARTESIAN_POINT('',(0.178645833333,-1.9755859375E-02,0.9350001)- );-#7025 = SURFACE_CURVE('',#7026,(#7030),.PCURVE_S1.);-#7026 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7027,#7028,#7029),+#6199 = CARTESIAN_POINT('',(0.113134776938,0.62759743151,0.59710515));+#6200 = CARTESIAN_POINT('',(0.11951498591,0.62759743151,0.59710515));+#6201 = CARTESIAN_POINT('',(0.123092460226,0.63096982768,0.59710515));+#6202 = PCURVE('',#6004,#6203);+#6203 = DEFINITIONAL_REPRESENTATION('',(#6204),#6208);+#6204 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6205,#6206,#6207),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6205 = CARTESIAN_POINT('',(2.884765913429E-02,3.4908857658E-02));+#6206 = CARTESIAN_POINT('',(3.522786810629E-02,3.4908857658E-02));+#6207 = CARTESIAN_POINT('',(3.880534242229E-02,3.8281253828E-02));+#6208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6209 = ORIENTED_EDGE('',*,*,#6210,.T.);+#6210 = EDGE_CURVE('',#6195,#6211,#6213,.T.);+#6211 = VERTEX_POINT('',#6212);+#6212 = CARTESIAN_POINT('',(0.126669934542,0.640403422374,0.59710515));+#6213 = SURFACE_CURVE('',#6214,(#6218),.PCURVE_S1.);+#6214 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6215,#6216,#6217),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6215 = CARTESIAN_POINT('',(0.123092460226,0.63096982768,0.59710515));+#6216 = CARTESIAN_POINT('',(0.126669934542,0.634342223851,0.59710515));+#6217 = CARTESIAN_POINT('',(0.126669934542,0.640403422374,0.59710515));+#6218 = PCURVE('',#6004,#6219);+#6219 = DEFINITIONAL_REPRESENTATION('',(#6220),#6224);+#6220 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6221,#6222,#6223),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6221 = CARTESIAN_POINT('',(3.880534242229E-02,3.8281253828E-02));+#6222 = CARTESIAN_POINT('',(4.238281673829E-02,4.1653649999E-02));+#6223 = CARTESIAN_POINT('',(4.238281673829E-02,4.7714848522E-02));+#6224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6225 = ORIENTED_EDGE('',*,*,#6226,.T.);+#6226 = EDGE_CURVE('',#6211,#6227,#6229,.T.);+#6227 = VERTEX_POINT('',#6228);+#6228 = CARTESIAN_POINT('',(0.123115246687,0.649814230606,0.59710515));+#6229 = SURFACE_CURVE('',#6230,(#6234),.PCURVE_S1.);+#6230 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6231,#6232,#6233),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6231 = CARTESIAN_POINT('',(0.126669934542,0.640403422374,0.59710515));+#6232 = CARTESIAN_POINT('',(0.126669934542,0.646464620896,0.59710515));+#6233 = CARTESIAN_POINT('',(0.123115246687,0.649814230606,0.59710515));+#6234 = PCURVE('',#6004,#6235);+#6235 = DEFINITIONAL_REPRESENTATION('',(#6236),#6240);+#6236 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6237,#6238,#6239),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6237 = CARTESIAN_POINT('',(4.238281673829E-02,4.7714848522E-02));+#6238 = CARTESIAN_POINT('',(4.238281673829E-02,5.3776047044E-02));+#6239 = CARTESIAN_POINT('',(3.882812888329E-02,5.7125656754E-02));+#6240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6241 = ORIENTED_EDGE('',*,*,#6242,.T.);+#6242 = EDGE_CURVE('',#6227,#6145,#6243,.T.);+#6243 = SURFACE_CURVE('',#6244,(#6248),.PCURVE_S1.);+#6244 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6245,#6246,#6247),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6245 = CARTESIAN_POINT('',(0.123115246687,0.649814230606,0.59710515));+#6246 = CARTESIAN_POINT('',(0.119560558831,0.653163840316,0.59710515));+#6247 = CARTESIAN_POINT('',(0.113134776938,0.653163840316,0.59710515));+#6248 = PCURVE('',#6004,#6249);+#6249 = DEFINITIONAL_REPRESENTATION('',(#6250),#6254);+#6250 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6251,#6252,#6253),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6251 = CARTESIAN_POINT('',(3.882812888329E-02,5.7125656754E-02));+#6252 = CARTESIAN_POINT('',(3.527344102729E-02,6.0475266464E-02));+#6253 = CARTESIAN_POINT('',(2.884765913429E-02,6.0475266464E-02));+#6254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6255 = SHELL_BASED_SURFACE_MODEL('',(#6256));+#6256 = OPEN_SHELL('',(#6257));+#6257 = ADVANCED_FACE('',(#6258,#6473),#6272,.T.);+#6258 = FACE_BOUND('',#6259,.F.);+#6259 = EDGE_LOOP('',(#6260,#6283,#6299,#6315,#6331,#6347,#6363,#6379,+ #6395,#6411,#6427,#6443,#6459));+#6260 = ORIENTED_EDGE('',*,*,#6261,.T.);+#6261 = EDGE_CURVE('',#6262,#6264,#6266,.T.);+#6262 = VERTEX_POINT('',#6263);+#6263 = CARTESIAN_POINT('',(0.180992856641,0.580383885122,0.59710515));+#6264 = VERTEX_POINT('',#6265);+#6265 = CARTESIAN_POINT('',(0.170328793075,0.591458104979,0.59710515));+#6266 = SURFACE_CURVE('',#6267,(#6271),.PCURVE_S1.);+#6267 = LINE('',#6268,#6269);+#6268 = CARTESIAN_POINT('',(0.180992856641,0.580383885122,0.59710515));+#6269 = VECTOR('',#6270,1.);+#6270 = DIRECTION('',(-0.693641687066,0.720320213491,0.));+#6271 = PCURVE('',#6272,#6277);+#6272 = PLANE('',#6273);+#6273 = AXIS2_PLACEMENT_3D('',#6274,#6275,#6276);+#6274 = CARTESIAN_POINT('',(0.140478529673,0.592688573852,0.59710515));+#6275 = DIRECTION('',(0.,0.,1.));+#6276 = DIRECTION('',(1.,0.,-0.));+#6277 = DEFINITIONAL_REPRESENTATION('',(#6278),#6282);+#6278 = LINE('',#6279,#6280);+#6279 = CARTESIAN_POINT('',(4.0514326968E-02,-1.230468873E-02));+#6280 = VECTOR('',#6281,1.);+#6281 = DIRECTION('',(-0.693641687066,0.720320213491));+#6282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6283 = ORIENTED_EDGE('',*,*,#6284,.T.);+#6284 = EDGE_CURVE('',#6264,#6285,#6287,.T.);+#6285 = VERTEX_POINT('',#6286);+#6286 = CARTESIAN_POINT('',(0.16941733465,0.591412532058,0.59710515));+#6287 = SURFACE_CURVE('',#6288,(#6292),.PCURVE_S1.);+#6288 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6289,#6290,#6291),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6289 = CARTESIAN_POINT('',(0.170328793075,0.591458104979,0.59710515));+#6290 = CARTESIAN_POINT('',(0.170009782626,0.591458104979,0.59710515));+#6291 = CARTESIAN_POINT('',(0.16941733465,0.591412532058,0.59710515));+#6292 = PCURVE('',#6272,#6293);+#6293 = DEFINITIONAL_REPRESENTATION('',(#6294),#6298);+#6294 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6295,#6296,#6297),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6295 = CARTESIAN_POINT('',(2.9850263402E-02,-1.230468873E-03));+#6296 = CARTESIAN_POINT('',(2.9531252953E-02,-1.230468873E-03));+#6297 = CARTESIAN_POINT('',(2.8938804977E-02,-1.276041794E-03));+#6298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6299 = ORIENTED_EDGE('',*,*,#6300,.T.);+#6300 = EDGE_CURVE('',#6285,#6301,#6303,.T.);+#6301 = VERTEX_POINT('',#6302);+#6302 = CARTESIAN_POINT('',(0.168460303304,0.591366959137,0.59710515));+#6303 = SURFACE_CURVE('',#6304,(#6308),.PCURVE_S1.);+#6304 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6305,#6306,#6307),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6305 = CARTESIAN_POINT('',(0.16941733465,0.591412532058,0.59710515));+#6306 = CARTESIAN_POINT('',(0.168824886674,0.591366959137,0.59710515));+#6307 = CARTESIAN_POINT('',(0.168460303304,0.591366959137,0.59710515));+#6308 = PCURVE('',#6272,#6309);+#6309 = DEFINITIONAL_REPRESENTATION('',(#6310),#6314);+#6310 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6311,#6312,#6313),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6311 = CARTESIAN_POINT('',(2.8938804977E-02,-1.276041794E-03));+#6312 = CARTESIAN_POINT('',(2.8346357001E-02,-1.321614715E-03));+#6313 = CARTESIAN_POINT('',(2.7981773631E-02,-1.321614715E-03));+#6314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6315 = ORIENTED_EDGE('',*,*,#6316,.T.);+#6316 = EDGE_CURVE('',#6301,#6317,#6319,.T.);+#6317 = VERTEX_POINT('',#6318);+#6318 = CARTESIAN_POINT('',(0.151438817227,0.600116960012,0.59710515));+#6319 = SURFACE_CURVE('',#6320,(#6324),.PCURVE_S1.);+#6320 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6321,#6322,#6323),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6321 = CARTESIAN_POINT('',(0.168460303304,0.591366959137,0.59710515));+#6322 = CARTESIAN_POINT('',(0.157067072998,0.591366959137,0.59710515));+#6323 = CARTESIAN_POINT('',(0.151438817227,0.600116960012,0.59710515));+#6324 = PCURVE('',#6272,#6325);+#6325 = DEFINITIONAL_REPRESENTATION('',(#6326),#6330);+#6326 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6327,#6328,#6329),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6327 = CARTESIAN_POINT('',(2.7981773631E-02,-1.321614715E-03));+#6328 = CARTESIAN_POINT('',(1.6588543325E-02,-1.321614715E-03));+#6329 = CARTESIAN_POINT('',(1.0960287554E-02,7.42838616E-03));+#6330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6331 = ORIENTED_EDGE('',*,*,#6332,.T.);+#6332 = EDGE_CURVE('',#6317,#6333,#6335,.T.);+#6333 = VERTEX_POINT('',#6334);+#6334 = CARTESIAN_POINT('',(0.145810561456,0.626640400164,0.59710515));+#6335 = SURFACE_CURVE('',#6336,(#6340),.PCURVE_S1.);+#6336 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6337,#6338,#6339),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6337 = CARTESIAN_POINT('',(0.151438817227,0.600116960012,0.59710515));+#6338 = CARTESIAN_POINT('',(0.145810561456,0.608866960887,0.59710515));+#6339 = CARTESIAN_POINT('',(0.145810561456,0.626640400164,0.59710515));+#6340 = PCURVE('',#6272,#6341);+#6341 = DEFINITIONAL_REPRESENTATION('',(#6342),#6346);+#6342 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6343,#6344,#6345),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6343 = CARTESIAN_POINT('',(1.0960287554E-02,7.42838616E-03));+#6344 = CARTESIAN_POINT('',(5.332031783E-03,1.6178387035E-02));+#6345 = CARTESIAN_POINT('',(5.332031783E-03,3.3951826312E-02));+#6346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6347 = ORIENTED_EDGE('',*,*,#6348,.T.);+#6348 = EDGE_CURVE('',#6333,#6349,#6351,.T.);+#6349 = VERTEX_POINT('',#6350);+#6350 = CARTESIAN_POINT('',(0.151438817227,0.653209413238,0.59710515));+#6351 = SURFACE_CURVE('',#6352,(#6356),.PCURVE_S1.);+#6352 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6353,#6354,#6355),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6353 = CARTESIAN_POINT('',(0.145810561456,0.626640400164,0.59710515));+#6354 = CARTESIAN_POINT('',(0.145810561456,0.644459412363,0.59710515));+#6355 = CARTESIAN_POINT('',(0.151438817227,0.653209413238,0.59710515));+#6356 = PCURVE('',#6272,#6357);+#6357 = DEFINITIONAL_REPRESENTATION('',(#6358),#6362);+#6358 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6359,#6360,#6361),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6359 = CARTESIAN_POINT('',(5.332031783E-03,3.3951826312E-02));+#6360 = CARTESIAN_POINT('',(5.332031783E-03,5.1770838511E-02));+#6361 = CARTESIAN_POINT('',(1.0960287554E-02,6.0520839386E-02));+#6362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6363 = ORIENTED_EDGE('',*,*,#6364,.T.);+#6364 = EDGE_CURVE('',#6349,#6365,#6367,.T.);+#6365 = VERTEX_POINT('',#6366);+#6366 = CARTESIAN_POINT('',(0.168551449147,0.661959414113,0.59710515));+#6367 = SURFACE_CURVE('',#6368,(#6372),.PCURVE_S1.);+#6368 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6369,#6370,#6371),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6369 = CARTESIAN_POINT('',(0.151438817227,0.653209413238,0.59710515));+#6370 = CARTESIAN_POINT('',(0.157067072998,0.661959414113,0.59710515));+#6371 = CARTESIAN_POINT('',(0.168551449147,0.661959414113,0.59710515));+#6372 = PCURVE('',#6272,#6373);+#6373 = DEFINITIONAL_REPRESENTATION('',(#6374),#6378);+#6374 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6375,#6376,#6377),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6375 = CARTESIAN_POINT('',(1.0960287554E-02,6.0520839386E-02));+#6376 = CARTESIAN_POINT('',(1.6588543325E-02,6.9270840261E-02));+#6377 = CARTESIAN_POINT('',(2.8072919474E-02,6.9270840261E-02));+#6378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6379 = ORIENTED_EDGE('',*,*,#6380,.T.);+#6380 = EDGE_CURVE('',#6365,#6381,#6383,.T.);+#6381 = VERTEX_POINT('',#6382);+#6382 = CARTESIAN_POINT('',(0.185709653988,0.653209413238,0.59710515));+#6383 = SURFACE_CURVE('',#6384,(#6388),.PCURVE_S1.);+#6384 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6385,#6386,#6387),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6385 = CARTESIAN_POINT('',(0.168551449147,0.661959414113,0.59710515));+#6386 = CARTESIAN_POINT('',(0.180081398216,0.661959414113,0.59710515));+#6387 = CARTESIAN_POINT('',(0.185709653988,0.653209413238,0.59710515));+#6388 = PCURVE('',#6272,#6389);+#6389 = DEFINITIONAL_REPRESENTATION('',(#6390),#6394);+#6390 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6391,#6392,#6393),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6391 = CARTESIAN_POINT('',(2.8072919474E-02,6.9270840261E-02));+#6392 = CARTESIAN_POINT('',(3.9602868543E-02,6.9270840261E-02));+#6393 = CARTESIAN_POINT('',(4.5231124315E-02,6.0520839386E-02));+#6394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6395 = ORIENTED_EDGE('',*,*,#6396,.T.);+#6396 = EDGE_CURVE('',#6381,#6397,#6399,.T.);+#6397 = VERTEX_POINT('',#6398);+#6398 = CARTESIAN_POINT('',(0.191337909759,0.626640400164,0.59710515));+#6399 = SURFACE_CURVE('',#6400,(#6404),.PCURVE_S1.);+#6400 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6401,#6402,#6403),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6401 = CARTESIAN_POINT('',(0.185709653988,0.653209413238,0.59710515));+#6402 = CARTESIAN_POINT('',(0.191337909759,0.644459412363,0.59710515));+#6403 = CARTESIAN_POINT('',(0.191337909759,0.626640400164,0.59710515));+#6404 = PCURVE('',#6272,#6405);+#6405 = DEFINITIONAL_REPRESENTATION('',(#6406),#6410);+#6406 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6407,#6408,#6409),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6407 = CARTESIAN_POINT('',(4.5231124315E-02,6.0520839386E-02));+#6408 = CARTESIAN_POINT('',(5.0859380086E-02,5.1770838511E-02));+#6409 = CARTESIAN_POINT('',(5.0859380086E-02,3.3951826312E-02));+#6410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6411 = ORIENTED_EDGE('',*,*,#6412,.T.);+#6412 = EDGE_CURVE('',#6397,#6413,#6415,.T.);+#6413 = VERTEX_POINT('',#6414);+#6414 = CARTESIAN_POINT('',(0.188216164655,0.605061621965,0.59710515));+#6415 = SURFACE_CURVE('',#6416,(#6420),.PCURVE_S1.);+#6416 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6417,#6418,#6419),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6417 = CARTESIAN_POINT('',(0.191337909759,0.626640400164,0.59710515));+#6418 = CARTESIAN_POINT('',(0.191337909759,0.613241961324,0.59710515));+#6419 = CARTESIAN_POINT('',(0.188216164655,0.605061621965,0.59710515));+#6420 = PCURVE('',#6272,#6421);+#6421 = DEFINITIONAL_REPRESENTATION('',(#6422),#6426);+#6422 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6423,#6424,#6425),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6423 = CARTESIAN_POINT('',(5.0859380086E-02,3.3951826312E-02));+#6424 = CARTESIAN_POINT('',(5.0859380086E-02,2.0553387472E-02));+#6425 = CARTESIAN_POINT('',(4.7737634982E-02,1.2373048113E-02));+#6426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6427 = ORIENTED_EDGE('',*,*,#6428,.T.);+#6428 = EDGE_CURVE('',#6413,#6429,#6431,.T.);+#6429 = VERTEX_POINT('',#6430);+#6430 = CARTESIAN_POINT('',(0.178759783501,0.593600032277,0.59710515));+#6431 = SURFACE_CURVE('',#6432,(#6436),.PCURVE_S1.);+#6432 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6433,#6434,#6435),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6433 = CARTESIAN_POINT('',(0.188216164655,0.605061621965,0.59710515));+#6434 = CARTESIAN_POINT('',(0.185094419551,0.596881282605,0.59710515));+#6435 = CARTESIAN_POINT('',(0.178759783501,0.593600032277,0.59710515));+#6436 = PCURVE('',#6272,#6437);+#6437 = DEFINITIONAL_REPRESENTATION('',(#6438),#6442);+#6438 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6439,#6440,#6441),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6439 = CARTESIAN_POINT('',(4.7737634982E-02,1.2373048113E-02));+#6440 = CARTESIAN_POINT('',(4.4615889878E-02,4.192708753E-03));+#6441 = CARTESIAN_POINT('',(3.8281253828E-02,9.11458425E-04));+#6442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6443 = ORIENTED_EDGE('',*,*,#6444,.T.);+#6444 = EDGE_CURVE('',#6429,#6445,#6447,.T.);+#6445 = VERTEX_POINT('',#6446);+#6446 = CARTESIAN_POINT('',(0.187874367746,0.584941177244,0.59710515));+#6447 = SURFACE_CURVE('',#6448,(#6452),.PCURVE_S1.);+#6448 = LINE('',#6449,#6450);+#6449 = CARTESIAN_POINT('',(0.178759783501,0.593600032277,0.59710515));+#6450 = VECTOR('',#6451,1.);+#6451 = DIRECTION('',(0.724999433594,-0.688749461915,0.));+#6452 = PCURVE('',#6272,#6453);+#6453 = DEFINITIONAL_REPRESENTATION('',(#6454),#6458);+#6454 = LINE('',#6455,#6456);+#6455 = CARTESIAN_POINT('',(3.8281253828E-02,9.11458425E-04));+#6456 = VECTOR('',#6457,1.);+#6457 = DIRECTION('',(0.724999433594,-0.688749461915));+#6458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6459 = ORIENTED_EDGE('',*,*,#6460,.T.);+#6460 = EDGE_CURVE('',#6445,#6262,#6461,.T.);+#6461 = SURFACE_CURVE('',#6462,(#6466),.PCURVE_S1.);+#6462 = LINE('',#6463,#6464);+#6463 = CARTESIAN_POINT('',(0.187874367746,0.584941177244,0.59710515));+#6464 = VECTOR('',#6465,1.);+#6465 = DIRECTION('',(-0.83374531243,-0.55214921353,0.));+#6466 = PCURVE('',#6272,#6467);+#6467 = DEFINITIONAL_REPRESENTATION('',(#6468),#6472);+#6468 = LINE('',#6469,#6470);+#6469 = CARTESIAN_POINT('',(4.7395838073E-02,-7.747396608E-03));+#6470 = VECTOR('',#6471,1.);+#6471 = DIRECTION('',(-0.83374531243,-0.55214921353));+#6472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6473 = FACE_BOUND('',#6474,.F.);+#6474 = EDGE_LOOP('',(#6475,#6493,#6509,#6525,#6541,#6557,#6573,#6589));+#6475 = ORIENTED_EDGE('',*,*,#6476,.T.);+#6476 = EDGE_CURVE('',#6477,#6479,#6481,.T.);+#6477 = VERTEX_POINT('',#6478);+#6478 = CARTESIAN_POINT('',(0.181722023381,0.626640400164,0.59710515));+#6479 = VERTEX_POINT('',#6480);+#6480 = CARTESIAN_POINT('',(0.178645851198,0.648059673139,0.59710515));+#6481 = SURFACE_CURVE('',#6482,(#6486),.PCURVE_S1.);+#6482 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6483,#6484,#6485),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6483 = CARTESIAN_POINT('',(0.181722023381,0.626640400164,0.59710515));+#6484 = CARTESIAN_POINT('',(0.181722023381,0.641633891247,0.59710515));+#6485 = CARTESIAN_POINT('',(0.178645851198,0.648059673139,0.59710515));+#6486 = PCURVE('',#6272,#6487);+#6487 = DEFINITIONAL_REPRESENTATION('',(#6488),#6492);+#6488 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6489,#6490,#6491),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6489 = CARTESIAN_POINT('',(4.1243493708E-02,3.3951826312E-02));+#6490 = CARTESIAN_POINT('',(4.1243493708E-02,4.8945317395E-02));+#6491 = CARTESIAN_POINT('',(3.8167321525E-02,5.5371099287E-02));+#6492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6493 = ORIENTED_EDGE('',*,*,#6494,.T.);+#6494 = EDGE_CURVE('',#6479,#6495,#6497,.T.);+#6495 = VERTEX_POINT('',#6496);+#6496 = CARTESIAN_POINT('',(0.168551449147,0.654485455032,0.59710515));+#6497 = SURFACE_CURVE('',#6498,(#6502),.PCURVE_S1.);+#6498 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6499,#6500,#6501),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6499 = CARTESIAN_POINT('',(0.178645851198,0.648059673139,0.59710515));+#6500 = CARTESIAN_POINT('',(0.175569679015,0.654485455032,0.59710515));+#6501 = CARTESIAN_POINT('',(0.168551449147,0.654485455032,0.59710515));+#6502 = PCURVE('',#6272,#6503);+#6503 = DEFINITIONAL_REPRESENTATION('',(#6504),#6508);+#6504 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6505,#6506,#6507),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6505 = CARTESIAN_POINT('',(3.8167321525E-02,5.5371099287E-02));+#6506 = CARTESIAN_POINT('',(3.5091149342E-02,6.179688118E-02));+#6507 = CARTESIAN_POINT('',(2.8072919474E-02,6.179688118E-02));+#6508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6509 = ORIENTED_EDGE('',*,*,#6510,.T.);+#6510 = EDGE_CURVE('',#6495,#6511,#6513,.T.);+#6511 = VERTEX_POINT('',#6512);+#6512 = CARTESIAN_POINT('',(0.158502620017,0.648059673139,0.59710515));+#6513 = SURFACE_CURVE('',#6514,(#6518),.PCURVE_S1.);+#6514 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6515,#6516,#6517),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6515 = CARTESIAN_POINT('',(0.168551449147,0.654485455032,0.59710515));+#6516 = CARTESIAN_POINT('',(0.1615787922,0.654485455032,0.59710515));+#6517 = CARTESIAN_POINT('',(0.158502620017,0.648059673139,0.59710515));+#6518 = PCURVE('',#6272,#6519);+#6519 = DEFINITIONAL_REPRESENTATION('',(#6520),#6524);+#6520 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6521,#6522,#6523),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6521 = CARTESIAN_POINT('',(2.8072919474E-02,6.179688118E-02));+#6522 = CARTESIAN_POINT('',(2.1100262527E-02,6.179688118E-02));+#6523 = CARTESIAN_POINT('',(1.8024090344E-02,5.5371099287E-02));+#6524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6525 = ORIENTED_EDGE('',*,*,#6526,.T.);+#6526 = EDGE_CURVE('',#6511,#6527,#6529,.T.);+#6527 = VERTEX_POINT('',#6528);+#6528 = CARTESIAN_POINT('',(0.155426447834,0.626640400164,0.59710515));+#6529 = SURFACE_CURVE('',#6530,(#6534),.PCURVE_S1.);+#6530 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6531,#6532,#6533),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6531 = CARTESIAN_POINT('',(0.158502620017,0.648059673139,0.59710515));+#6532 = CARTESIAN_POINT('',(0.155426447834,0.641633891247,0.59710515));+#6533 = CARTESIAN_POINT('',(0.155426447834,0.626640400164,0.59710515));+#6534 = PCURVE('',#6272,#6535);+#6535 = DEFINITIONAL_REPRESENTATION('',(#6536),#6540);+#6536 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6537,#6538,#6539),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6537 = CARTESIAN_POINT('',(1.8024090344E-02,5.5371099287E-02));+#6538 = CARTESIAN_POINT('',(1.4947918161E-02,4.8945317395E-02));+#6539 = CARTESIAN_POINT('',(1.4947918161E-02,3.3951826312E-02));+#6540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6541 = ORIENTED_EDGE('',*,*,#6542,.T.);+#6542 = EDGE_CURVE('',#6527,#6543,#6545,.T.);+#6543 = VERTEX_POINT('',#6544);+#6544 = CARTESIAN_POINT('',(0.158502620017,0.60526670011,0.59710515));+#6545 = SURFACE_CURVE('',#6546,(#6550),.PCURVE_S1.);+#6546 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6547,#6548,#6549),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6547 = CARTESIAN_POINT('',(0.155426447834,0.626640400164,0.59710515));+#6548 = CARTESIAN_POINT('',(0.155426447834,0.611692482003,0.59710515));+#6549 = CARTESIAN_POINT('',(0.158502620017,0.60526670011,0.59710515));+#6550 = PCURVE('',#6272,#6551);+#6551 = DEFINITIONAL_REPRESENTATION('',(#6552),#6556);+#6552 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6553,#6554,#6555),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6553 = CARTESIAN_POINT('',(1.4947918161E-02,3.3951826312E-02));+#6554 = CARTESIAN_POINT('',(1.4947918161E-02,1.9003908151E-02));+#6555 = CARTESIAN_POINT('',(1.8024090344E-02,1.2578126258E-02));+#6556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6557 = ORIENTED_EDGE('',*,*,#6558,.T.);+#6558 = EDGE_CURVE('',#6543,#6559,#6561,.T.);+#6559 = VERTEX_POINT('',#6560);+#6560 = CARTESIAN_POINT('',(0.168551449147,0.598840918217,0.59710515));+#6561 = SURFACE_CURVE('',#6562,(#6566),.PCURVE_S1.);+#6562 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6563,#6564,#6565),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6563 = CARTESIAN_POINT('',(0.158502620017,0.60526670011,0.59710515));+#6564 = CARTESIAN_POINT('',(0.1615787922,0.598840918217,0.59710515));+#6565 = CARTESIAN_POINT('',(0.168551449147,0.598840918217,0.59710515));+#6566 = PCURVE('',#6272,#6567);+#6567 = DEFINITIONAL_REPRESENTATION('',(#6568),#6572);+#6568 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6569,#6570,#6571),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6569 = CARTESIAN_POINT('',(1.8024090344E-02,1.2578126258E-02));+#6570 = CARTESIAN_POINT('',(2.1100262527E-02,6.152344365E-03));+#6571 = CARTESIAN_POINT('',(2.8072919474E-02,6.152344365E-03));+#6572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6573 = ORIENTED_EDGE('',*,*,#6574,.T.);+#6574 = EDGE_CURVE('',#6559,#6575,#6577,.T.);+#6575 = VERTEX_POINT('',#6576);+#6576 = CARTESIAN_POINT('',(0.178645851198,0.605243913649,0.59710515));+#6577 = SURFACE_CURVE('',#6578,(#6582),.PCURVE_S1.);+#6578 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6579,#6580,#6581), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#7027 = CARTESIAN_POINT('',(0.168551432292,-2.615885416667E-02,0.9350001- ));-#7028 = CARTESIAN_POINT('',(0.175569661458,-2.615885416667E-02,0.9350001- ));-#7029 = CARTESIAN_POINT('',(0.178645833333,-1.9755859375E-02,0.9350001)- );-#7030 = PCURVE('',#6720,#7031);-#7031 = DEFINITIONAL_REPRESENTATION('',(#7032),#7036);-#7032 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7033,#7034,#7035),+#6579 = CARTESIAN_POINT('',(0.168551449147,0.598840918217,0.59710515));+#6580 = CARTESIAN_POINT('',(0.175569679015,0.598840918217,0.59710515));+#6581 = CARTESIAN_POINT('',(0.178645851198,0.605243913649,0.59710515));+#6582 = PCURVE('',#6272,#6583);+#6583 = DEFINITIONAL_REPRESENTATION('',(#6584),#6588);+#6584 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6585,#6586,#6587), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#7033 = CARTESIAN_POINT('',(2.8072916667E-02,6.15234375E-03));-#7034 = CARTESIAN_POINT('',(3.5091145833E-02,6.15234375E-03));-#7035 = CARTESIAN_POINT('',(3.8167317708E-02,1.255533854167E-02));-#7036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#6585 = CARTESIAN_POINT('',(2.8072919474E-02,6.152344365E-03));+#6586 = CARTESIAN_POINT('',(3.5091149342E-02,6.152344365E-03));+#6587 = CARTESIAN_POINT('',(3.8167321525E-02,1.2555339797E-02));+#6588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7037 = ORIENTED_EDGE('',*,*,#7038,.T.);-#7038 = EDGE_CURVE('',#7023,#6925,#7039,.T.);+#6589 = ORIENTED_EDGE('',*,*,#6590,.T.);+#6590 = EDGE_CURVE('',#6575,#6477,#6591,.T.);+#6591 = SURFACE_CURVE('',#6592,(#6596),.PCURVE_S1.);+#6592 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6593,#6594,#6595),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6593 = CARTESIAN_POINT('',(0.178645851198,0.605243913649,0.59710515));+#6594 = CARTESIAN_POINT('',(0.181722023381,0.611646909081,0.59710515));+#6595 = CARTESIAN_POINT('',(0.181722023381,0.626640400164,0.59710515));+#6596 = PCURVE('',#6272,#6597);+#6597 = DEFINITIONAL_REPRESENTATION('',(#6598),#6602);+#6598 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6599,#6600,#6601),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6599 = CARTESIAN_POINT('',(3.8167321525E-02,1.2555339797E-02));+#6600 = CARTESIAN_POINT('',(4.1243493708E-02,1.8958335229E-02));+#6601 = CARTESIAN_POINT('',(4.1243493708E-02,3.3951826312E-02));+#6602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6603 = SHELL_BASED_SURFACE_MODEL('',(#6604));+#6604 = OPEN_SHELL('',(#6605));+#6605 = ADVANCED_FACE('',(#6606),#6620,.T.);+#6606 = FACE_BOUND('',#6607,.F.);+#6607 = EDGE_LOOP('',(#6608,#6631,#6647,#6663,#6679,#6695,#6711,#6727,+ #6743,#6759));+#6608 = ORIENTED_EDGE('',*,*,#6609,.T.);+#6609 = EDGE_CURVE('',#6610,#6612,#6614,.T.);+#6610 = VERTEX_POINT('',#6611);+#6611 = CARTESIAN_POINT('',(0.203004577592,0.592688573852,0.59710515));+#6612 = VERTEX_POINT('',#6613);+#6613 = CARTESIAN_POINT('',(0.203004577592,0.66072894524,0.59710515));+#6614 = SURFACE_CURVE('',#6615,(#6619),.PCURVE_S1.);+#6615 = LINE('',#6616,#6617);+#6616 = CARTESIAN_POINT('',(0.203004577592,0.592688573852,0.59710515));+#6617 = VECTOR('',#6618,1.);+#6618 = DIRECTION('',(0.,1.,0.));+#6619 = PCURVE('',#6620,#6625);+#6620 = PLANE('',#6621);+#6621 = AXIS2_PLACEMENT_3D('',#6622,#6623,#6624);+#6622 = CARTESIAN_POINT('',(0.196669941542,0.592688573852,0.59710515));+#6623 = DIRECTION('',(0.,0.,1.));+#6624 = DIRECTION('',(1.,0.,-0.));+#6625 = DEFINITIONAL_REPRESENTATION('',(#6626),#6630);+#6626 = LINE('',#6627,#6628);+#6627 = CARTESIAN_POINT('',(6.33463605E-03,0.));+#6628 = VECTOR('',#6629,1.);+#6629 = DIRECTION('',(0.,1.));+#6630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6631 = ORIENTED_EDGE('',*,*,#6632,.T.);+#6632 = EDGE_CURVE('',#6612,#6633,#6635,.T.);+#6633 = VERTEX_POINT('',#6634);+#6634 = CARTESIAN_POINT('',(0.214671245425,0.66072894524,0.59710515));+#6635 = SURFACE_CURVE('',#6636,(#6640),.PCURVE_S1.);+#6636 = LINE('',#6637,#6638);+#6637 = CARTESIAN_POINT('',(0.203004577592,0.66072894524,0.59710515));+#6638 = VECTOR('',#6639,1.);+#6639 = DIRECTION('',(1.,0.,0.));+#6640 = PCURVE('',#6620,#6641);+#6641 = DEFINITIONAL_REPRESENTATION('',(#6642),#6646);+#6642 = LINE('',#6643,#6644);+#6643 = CARTESIAN_POINT('',(6.33463605E-03,6.8040371388E-02));+#6644 = VECTOR('',#6645,1.);+#6645 = DIRECTION('',(1.,0.));+#6646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6647 = ORIENTED_EDGE('',*,*,#6648,.T.);+#6648 = EDGE_CURVE('',#6633,#6649,#6651,.T.);+#6649 = VERTEX_POINT('',#6650);+#6650 = CARTESIAN_POINT('',(0.237639997722,0.604719825055,0.59710515));+#6651 = SURFACE_CURVE('',#6652,(#6656),.PCURVE_S1.);+#6652 = LINE('',#6653,#6654);+#6653 = CARTESIAN_POINT('',(0.214671245425,0.66072894524,0.59710515));+#6654 = VECTOR('',#6655,1.);+#6655 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#6656 = PCURVE('',#6620,#6657);+#6657 = DEFINITIONAL_REPRESENTATION('',(#6658),#6662);+#6658 = LINE('',#6659,#6660);+#6659 = CARTESIAN_POINT('',(1.8001303883E-02,6.8040371388E-02));+#6660 = VECTOR('',#6661,1.);+#6661 = DIRECTION('',(0.379424173637,-0.92522283611));+#6662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6663 = ORIENTED_EDGE('',*,*,#6664,.T.);+#6664 = EDGE_CURVE('',#6649,#6665,#6667,.T.);+#6665 = VERTEX_POINT('',#6666);+#6666 = CARTESIAN_POINT('',(0.237639997722,0.66072894524,0.59710515));+#6667 = SURFACE_CURVE('',#6668,(#6672),.PCURVE_S1.);+#6668 = LINE('',#6669,#6670);+#6669 = CARTESIAN_POINT('',(0.237639997722,0.604719825055,0.59710515));+#6670 = VECTOR('',#6671,1.);+#6671 = DIRECTION('',(0.,1.,0.));+#6672 = PCURVE('',#6620,#6673);+#6673 = DEFINITIONAL_REPRESENTATION('',(#6674),#6678);+#6674 = LINE('',#6675,#6676);+#6675 = CARTESIAN_POINT('',(4.097005618E-02,1.2031251203E-02));+#6676 = VECTOR('',#6677,1.);+#6677 = DIRECTION('',(0.,1.));+#6678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6679 = ORIENTED_EDGE('',*,*,#6680,.T.);+#6680 = EDGE_CURVE('',#6665,#6681,#6683,.T.);+#6681 = VERTEX_POINT('',#6682);+#6682 = CARTESIAN_POINT('',(0.246526717361,0.66072894524,0.59710515));+#6683 = SURFACE_CURVE('',#6684,(#6688),.PCURVE_S1.);+#6684 = LINE('',#6685,#6686);+#6685 = CARTESIAN_POINT('',(0.237639997722,0.66072894524,0.59710515));+#6686 = VECTOR('',#6687,1.);+#6687 = DIRECTION('',(1.,0.,0.));+#6688 = PCURVE('',#6620,#6689);+#6689 = DEFINITIONAL_REPRESENTATION('',(#6690),#6694);+#6690 = LINE('',#6691,#6692);+#6691 = CARTESIAN_POINT('',(4.097005618E-02,6.8040371388E-02));+#6692 = VECTOR('',#6693,1.);+#6693 = DIRECTION('',(1.,0.));+#6694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6695 = ORIENTED_EDGE('',*,*,#6696,.T.);+#6696 = EDGE_CURVE('',#6681,#6697,#6699,.T.);+#6697 = VERTEX_POINT('',#6698);+#6698 = CARTESIAN_POINT('',(0.246526717361,0.592688573852,0.59710515));+#6699 = SURFACE_CURVE('',#6700,(#6704),.PCURVE_S1.);+#6700 = LINE('',#6701,#6702);+#6701 = CARTESIAN_POINT('',(0.246526717361,0.66072894524,0.59710515));+#6702 = VECTOR('',#6703,1.);+#6703 = DIRECTION('',(0.,-1.,0.));+#6704 = PCURVE('',#6620,#6705);+#6705 = DEFINITIONAL_REPRESENTATION('',(#6706),#6710);+#6706 = LINE('',#6707,#6708);+#6707 = CARTESIAN_POINT('',(4.9856775819E-02,6.8040371388E-02));+#6708 = VECTOR('',#6709,1.);+#6709 = DIRECTION('',(0.,-1.));+#6710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6711 = ORIENTED_EDGE('',*,*,#6712,.T.);+#6712 = EDGE_CURVE('',#6697,#6713,#6715,.T.);+#6713 = VERTEX_POINT('',#6714);+#6714 = CARTESIAN_POINT('',(0.234860049528,0.592688573852,0.59710515));+#6715 = SURFACE_CURVE('',#6716,(#6720),.PCURVE_S1.);+#6716 = LINE('',#6717,#6718);+#6717 = CARTESIAN_POINT('',(0.246526717361,0.592688573852,0.59710515));+#6718 = VECTOR('',#6719,1.);+#6719 = DIRECTION('',(-1.,0.,0.));+#6720 = PCURVE('',#6620,#6721);+#6721 = DEFINITIONAL_REPRESENTATION('',(#6722),#6726);+#6722 = LINE('',#6723,#6724);+#6723 = CARTESIAN_POINT('',(4.9856775819E-02,0.));+#6724 = VECTOR('',#6725,1.);+#6725 = DIRECTION('',(-1.,0.));+#6726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6727 = ORIENTED_EDGE('',*,*,#6728,.T.);+#6728 = EDGE_CURVE('',#6713,#6729,#6731,.T.);+#6729 = VERTEX_POINT('',#6730);+#6730 = CARTESIAN_POINT('',(0.211891297231,0.648697694036,0.59710515));+#6731 = SURFACE_CURVE('',#6732,(#6736),.PCURVE_S1.);+#6732 = LINE('',#6733,#6734);+#6733 = CARTESIAN_POINT('',(0.234860049528,0.592688573852,0.59710515));+#6734 = VECTOR('',#6735,1.);+#6735 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#6736 = PCURVE('',#6620,#6737);+#6737 = DEFINITIONAL_REPRESENTATION('',(#6738),#6742);+#6738 = LINE('',#6739,#6740);+#6739 = CARTESIAN_POINT('',(3.8190107986E-02,0.));+#6740 = VECTOR('',#6741,1.);+#6741 = DIRECTION('',(-0.379424173637,0.92522283611));+#6742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6743 = ORIENTED_EDGE('',*,*,#6744,.T.);+#6744 = EDGE_CURVE('',#6729,#6745,#6747,.T.);+#6745 = VERTEX_POINT('',#6746);+#6746 = CARTESIAN_POINT('',(0.211891297231,0.592688573852,0.59710515));+#6747 = SURFACE_CURVE('',#6748,(#6752),.PCURVE_S1.);+#6748 = LINE('',#6749,#6750);+#6749 = CARTESIAN_POINT('',(0.211891297231,0.648697694036,0.59710515));+#6750 = VECTOR('',#6751,1.);+#6751 = DIRECTION('',(0.,-1.,0.));+#6752 = PCURVE('',#6620,#6753);+#6753 = DEFINITIONAL_REPRESENTATION('',(#6754),#6758);+#6754 = LINE('',#6755,#6756);+#6755 = CARTESIAN_POINT('',(1.5221355689E-02,5.6009120184E-02));+#6756 = VECTOR('',#6757,1.);+#6757 = DIRECTION('',(0.,-1.));+#6758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6759 = ORIENTED_EDGE('',*,*,#6760,.T.);+#6760 = EDGE_CURVE('',#6745,#6610,#6761,.T.);+#6761 = SURFACE_CURVE('',#6762,(#6766),.PCURVE_S1.);+#6762 = LINE('',#6763,#6764);+#6763 = CARTESIAN_POINT('',(0.211891297231,0.592688573852,0.59710515));+#6764 = VECTOR('',#6765,1.);+#6765 = DIRECTION('',(-1.,0.,0.));+#6766 = PCURVE('',#6620,#6767);+#6767 = DEFINITIONAL_REPRESENTATION('',(#6768),#6772);+#6768 = LINE('',#6769,#6770);+#6769 = CARTESIAN_POINT('',(1.5221355689E-02,0.));+#6770 = VECTOR('',#6771,1.);+#6771 = DIRECTION('',(-1.,0.));+#6772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6773 = SHELL_BASED_SURFACE_MODEL('',(#6774));+#6774 = OPEN_SHELL('',(#6775));+#6775 = ADVANCED_FACE('',(#6776),#6790,.T.);+#6776 = FACE_BOUND('',#6777,.F.);+#6777 = EDGE_LOOP('',(#6778,#6801,#6817,#6833,#6849,#6865,#6881,#6897,+ #6913,#6929));+#6778 = ORIENTED_EDGE('',*,*,#6779,.T.);+#6779 = EDGE_CURVE('',#6780,#6782,#6784,.T.);+#6780 = VERTEX_POINT('',#6781);+#6781 = CARTESIAN_POINT('',(0.259195989461,0.592688573852,0.59710515));+#6782 = VERTEX_POINT('',#6783);+#6783 = CARTESIAN_POINT('',(0.259195989461,0.66072894524,0.59710515));+#6784 = SURFACE_CURVE('',#6785,(#6789),.PCURVE_S1.);+#6785 = LINE('',#6786,#6787);+#6786 = CARTESIAN_POINT('',(0.259195989461,0.592688573852,0.59710515));+#6787 = VECTOR('',#6788,1.);+#6788 = DIRECTION('',(0.,1.,0.));+#6789 = PCURVE('',#6790,#6795);+#6790 = PLANE('',#6791);+#6791 = AXIS2_PLACEMENT_3D('',#6792,#6793,#6794);+#6792 = CARTESIAN_POINT('',(0.252861353411,0.592688573852,0.59710515));+#6793 = DIRECTION('',(0.,0.,1.));+#6794 = DIRECTION('',(1.,0.,-0.));+#6795 = DEFINITIONAL_REPRESENTATION('',(#6796),#6800);+#6796 = LINE('',#6797,#6798);+#6797 = CARTESIAN_POINT('',(6.33463605E-03,0.));+#6798 = VECTOR('',#6799,1.);+#6799 = DIRECTION('',(0.,1.));+#6800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6801 = ORIENTED_EDGE('',*,*,#6802,.T.);+#6802 = EDGE_CURVE('',#6782,#6803,#6805,.T.);+#6803 = VERTEX_POINT('',#6804);+#6804 = CARTESIAN_POINT('',(0.270862657295,0.66072894524,0.59710515));+#6805 = SURFACE_CURVE('',#6806,(#6810),.PCURVE_S1.);+#6806 = LINE('',#6807,#6808);+#6807 = CARTESIAN_POINT('',(0.259195989461,0.66072894524,0.59710515));+#6808 = VECTOR('',#6809,1.);+#6809 = DIRECTION('',(1.,0.,0.));+#6810 = PCURVE('',#6790,#6811);+#6811 = DEFINITIONAL_REPRESENTATION('',(#6812),#6816);+#6812 = LINE('',#6813,#6814);+#6813 = CARTESIAN_POINT('',(6.33463605E-03,6.8040371388E-02));+#6814 = VECTOR('',#6815,1.);+#6815 = DIRECTION('',(1.,0.));+#6816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6817 = ORIENTED_EDGE('',*,*,#6818,.T.);+#6818 = EDGE_CURVE('',#6803,#6819,#6821,.T.);+#6819 = VERTEX_POINT('',#6820);+#6820 = CARTESIAN_POINT('',(0.293831409591,0.604719825055,0.59710515));+#6821 = SURFACE_CURVE('',#6822,(#6826),.PCURVE_S1.);+#6822 = LINE('',#6823,#6824);+#6823 = CARTESIAN_POINT('',(0.270862657295,0.66072894524,0.59710515));+#6824 = VECTOR('',#6825,1.);+#6825 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#6826 = PCURVE('',#6790,#6827);+#6827 = DEFINITIONAL_REPRESENTATION('',(#6828),#6832);+#6828 = LINE('',#6829,#6830);+#6829 = CARTESIAN_POINT('',(1.8001303884E-02,6.8040371388E-02));+#6830 = VECTOR('',#6831,1.);+#6831 = DIRECTION('',(0.379424173637,-0.92522283611));+#6832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6833 = ORIENTED_EDGE('',*,*,#6834,.T.);+#6834 = EDGE_CURVE('',#6819,#6835,#6837,.T.);+#6835 = VERTEX_POINT('',#6836);+#6836 = CARTESIAN_POINT('',(0.293831409591,0.66072894524,0.59710515));+#6837 = SURFACE_CURVE('',#6838,(#6842),.PCURVE_S1.);+#6838 = LINE('',#6839,#6840);+#6839 = CARTESIAN_POINT('',(0.293831409591,0.604719825055,0.59710515));+#6840 = VECTOR('',#6841,1.);+#6841 = DIRECTION('',(0.,1.,0.));+#6842 = PCURVE('',#6790,#6843);+#6843 = DEFINITIONAL_REPRESENTATION('',(#6844),#6848);+#6844 = LINE('',#6845,#6846);+#6845 = CARTESIAN_POINT('',(4.097005618E-02,1.2031251203E-02));+#6846 = VECTOR('',#6847,1.);+#6847 = DIRECTION('',(0.,1.));+#6848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6849 = ORIENTED_EDGE('',*,*,#6850,.T.);+#6850 = EDGE_CURVE('',#6835,#6851,#6853,.T.);+#6851 = VERTEX_POINT('',#6852);+#6852 = CARTESIAN_POINT('',(0.30271812923,0.66072894524,0.59710515));+#6853 = SURFACE_CURVE('',#6854,(#6858),.PCURVE_S1.);+#6854 = LINE('',#6855,#6856);+#6855 = CARTESIAN_POINT('',(0.293831409591,0.66072894524,0.59710515));+#6856 = VECTOR('',#6857,1.);+#6857 = DIRECTION('',(1.,0.,0.));+#6858 = PCURVE('',#6790,#6859);+#6859 = DEFINITIONAL_REPRESENTATION('',(#6860),#6864);+#6860 = LINE('',#6861,#6862);+#6861 = CARTESIAN_POINT('',(4.097005618E-02,6.8040371388E-02));+#6862 = VECTOR('',#6863,1.);+#6863 = DIRECTION('',(1.,0.));+#6864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6865 = ORIENTED_EDGE('',*,*,#6866,.T.);+#6866 = EDGE_CURVE('',#6851,#6867,#6869,.T.);+#6867 = VERTEX_POINT('',#6868);+#6868 = CARTESIAN_POINT('',(0.30271812923,0.592688573852,0.59710515));+#6869 = SURFACE_CURVE('',#6870,(#6874),.PCURVE_S1.);+#6870 = LINE('',#6871,#6872);+#6871 = CARTESIAN_POINT('',(0.30271812923,0.66072894524,0.59710515));+#6872 = VECTOR('',#6873,1.);+#6873 = DIRECTION('',(0.,-1.,0.));+#6874 = PCURVE('',#6790,#6875);+#6875 = DEFINITIONAL_REPRESENTATION('',(#6876),#6880);+#6876 = LINE('',#6877,#6878);+#6877 = CARTESIAN_POINT('',(4.9856775819E-02,6.8040371388E-02));+#6878 = VECTOR('',#6879,1.);+#6879 = DIRECTION('',(0.,-1.));+#6880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6881 = ORIENTED_EDGE('',*,*,#6882,.T.);+#6882 = EDGE_CURVE('',#6867,#6883,#6885,.T.);+#6883 = VERTEX_POINT('',#6884);+#6884 = CARTESIAN_POINT('',(0.291051461397,0.592688573852,0.59710515));+#6885 = SURFACE_CURVE('',#6886,(#6890),.PCURVE_S1.);+#6886 = LINE('',#6887,#6888);+#6887 = CARTESIAN_POINT('',(0.30271812923,0.592688573852,0.59710515));+#6888 = VECTOR('',#6889,1.);+#6889 = DIRECTION('',(-1.,0.,0.));+#6890 = PCURVE('',#6790,#6891);+#6891 = DEFINITIONAL_REPRESENTATION('',(#6892),#6896);+#6892 = LINE('',#6893,#6894);+#6893 = CARTESIAN_POINT('',(4.9856775819E-02,0.));+#6894 = VECTOR('',#6895,1.);+#6895 = DIRECTION('',(-1.,0.));+#6896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6897 = ORIENTED_EDGE('',*,*,#6898,.T.);+#6898 = EDGE_CURVE('',#6883,#6899,#6901,.T.);+#6899 = VERTEX_POINT('',#6900);+#6900 = CARTESIAN_POINT('',(0.2680827091,0.648697694036,0.59710515));+#6901 = SURFACE_CURVE('',#6902,(#6906),.PCURVE_S1.);+#6902 = LINE('',#6903,#6904);+#6903 = CARTESIAN_POINT('',(0.291051461397,0.592688573852,0.59710515));+#6904 = VECTOR('',#6905,1.);+#6905 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#6906 = PCURVE('',#6790,#6907);+#6907 = DEFINITIONAL_REPRESENTATION('',(#6908),#6912);+#6908 = LINE('',#6909,#6910);+#6909 = CARTESIAN_POINT('',(3.8190107986E-02,0.));+#6910 = VECTOR('',#6911,1.);+#6911 = DIRECTION('',(-0.379424173637,0.92522283611));+#6912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6913 = ORIENTED_EDGE('',*,*,#6914,.T.);+#6914 = EDGE_CURVE('',#6899,#6915,#6917,.T.);+#6915 = VERTEX_POINT('',#6916);+#6916 = CARTESIAN_POINT('',(0.2680827091,0.592688573852,0.59710515));+#6917 = SURFACE_CURVE('',#6918,(#6922),.PCURVE_S1.);+#6918 = LINE('',#6919,#6920);+#6919 = CARTESIAN_POINT('',(0.2680827091,0.648697694036,0.59710515));+#6920 = VECTOR('',#6921,1.);+#6921 = DIRECTION('',(0.,-1.,0.));+#6922 = PCURVE('',#6790,#6923);+#6923 = DEFINITIONAL_REPRESENTATION('',(#6924),#6928);+#6924 = LINE('',#6925,#6926);+#6925 = CARTESIAN_POINT('',(1.5221355689E-02,5.6009120184E-02));+#6926 = VECTOR('',#6927,1.);+#6927 = DIRECTION('',(0.,-1.));+#6928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6929 = ORIENTED_EDGE('',*,*,#6930,.T.);+#6930 = EDGE_CURVE('',#6915,#6780,#6931,.T.);+#6931 = SURFACE_CURVE('',#6932,(#6936),.PCURVE_S1.);+#6932 = LINE('',#6933,#6934);+#6933 = CARTESIAN_POINT('',(0.2680827091,0.592688573852,0.59710515));+#6934 = VECTOR('',#6935,1.);+#6935 = DIRECTION('',(-1.,0.,0.));+#6936 = PCURVE('',#6790,#6937);+#6937 = DEFINITIONAL_REPRESENTATION('',(#6938),#6942);+#6938 = LINE('',#6939,#6940);+#6939 = CARTESIAN_POINT('',(1.5221355689E-02,0.));+#6940 = VECTOR('',#6941,1.);+#6941 = DIRECTION('',(-1.,0.));+#6942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6943 = SHELL_BASED_SURFACE_MODEL('',(#6944));+#6944 = OPEN_SHELL('',(#6945));+#6945 = ADVANCED_FACE('',(#6946),#6960,.T.);+#6946 = FACE_BOUND('',#6947,.F.);+#6947 = EDGE_LOOP('',(#6948,#6971,#6987,#7003,#7019,#7035,#7051,#7067,+ #7083,#7099));+#6948 = ORIENTED_EDGE('',*,*,#6949,.T.);+#6949 = EDGE_CURVE('',#6950,#6952,#6954,.T.);+#6950 = VERTEX_POINT('',#6951);+#6951 = CARTESIAN_POINT('',(0.31538740133,0.592688573852,0.59710515));+#6952 = VERTEX_POINT('',#6953);+#6953 = CARTESIAN_POINT('',(0.31538740133,0.66072894524,0.59710515));+#6954 = SURFACE_CURVE('',#6955,(#6959),.PCURVE_S1.);+#6955 = LINE('',#6956,#6957);+#6956 = CARTESIAN_POINT('',(0.31538740133,0.592688573852,0.59710515));+#6957 = VECTOR('',#6958,1.);+#6958 = DIRECTION('',(0.,1.,0.));+#6959 = PCURVE('',#6960,#6965);+#6960 = PLANE('',#6961);+#6961 = AXIS2_PLACEMENT_3D('',#6962,#6963,#6964);+#6962 = CARTESIAN_POINT('',(0.30905276528,0.592688573852,0.59710515));+#6963 = DIRECTION('',(0.,0.,1.));+#6964 = DIRECTION('',(1.,0.,-0.));+#6965 = DEFINITIONAL_REPRESENTATION('',(#6966),#6970);+#6966 = LINE('',#6967,#6968);+#6967 = CARTESIAN_POINT('',(6.33463605E-03,0.));+#6968 = VECTOR('',#6969,1.);+#6969 = DIRECTION('',(0.,1.));+#6970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6971 = ORIENTED_EDGE('',*,*,#6972,.T.);+#6972 = EDGE_CURVE('',#6952,#6973,#6975,.T.);+#6973 = VERTEX_POINT('',#6974);+#6974 = CARTESIAN_POINT('',(0.327054069164,0.66072894524,0.59710515));+#6975 = SURFACE_CURVE('',#6976,(#6980),.PCURVE_S1.);+#6976 = LINE('',#6977,#6978);+#6977 = CARTESIAN_POINT('',(0.31538740133,0.66072894524,0.59710515));+#6978 = VECTOR('',#6979,1.);+#6979 = DIRECTION('',(1.,0.,0.));+#6980 = PCURVE('',#6960,#6981);+#6981 = DEFINITIONAL_REPRESENTATION('',(#6982),#6986);+#6982 = LINE('',#6983,#6984);+#6983 = CARTESIAN_POINT('',(6.33463605E-03,6.8040371388E-02));+#6984 = VECTOR('',#6985,1.);+#6985 = DIRECTION('',(1.,0.));+#6986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6987 = ORIENTED_EDGE('',*,*,#6988,.T.);+#6988 = EDGE_CURVE('',#6973,#6989,#6991,.T.);+#6989 = VERTEX_POINT('',#6990);+#6990 = CARTESIAN_POINT('',(0.350022821461,0.604719825055,0.59710515));+#6991 = SURFACE_CURVE('',#6992,(#6996),.PCURVE_S1.);+#6992 = LINE('',#6993,#6994);+#6993 = CARTESIAN_POINT('',(0.327054069164,0.66072894524,0.59710515));+#6994 = VECTOR('',#6995,1.);+#6995 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#6996 = PCURVE('',#6960,#6997);+#6997 = DEFINITIONAL_REPRESENTATION('',(#6998),#7002);+#6998 = LINE('',#6999,#7000);+#6999 = CARTESIAN_POINT('',(1.8001303884E-02,6.8040371388E-02));+#7000 = VECTOR('',#7001,1.);+#7001 = DIRECTION('',(0.379424173637,-0.92522283611));+#7002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7003 = ORIENTED_EDGE('',*,*,#7004,.T.);+#7004 = EDGE_CURVE('',#6989,#7005,#7007,.T.);+#7005 = VERTEX_POINT('',#7006);+#7006 = CARTESIAN_POINT('',(0.350022821461,0.66072894524,0.59710515));+#7007 = SURFACE_CURVE('',#7008,(#7012),.PCURVE_S1.);+#7008 = LINE('',#7009,#7010);+#7009 = CARTESIAN_POINT('',(0.350022821461,0.604719825055,0.59710515));+#7010 = VECTOR('',#7011,1.);+#7011 = DIRECTION('',(0.,1.,0.));+#7012 = PCURVE('',#6960,#7013);+#7013 = DEFINITIONAL_REPRESENTATION('',(#7014),#7018);+#7014 = LINE('',#7015,#7016);+#7015 = CARTESIAN_POINT('',(4.0970056181E-02,1.2031251203E-02));+#7016 = VECTOR('',#7017,1.);+#7017 = DIRECTION('',(0.,1.));+#7018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7019 = ORIENTED_EDGE('',*,*,#7020,.T.);+#7020 = EDGE_CURVE('',#7005,#7021,#7023,.T.);+#7021 = VERTEX_POINT('',#7022);+#7022 = CARTESIAN_POINT('',(0.358909541099,0.66072894524,0.59710515));+#7023 = SURFACE_CURVE('',#7024,(#7028),.PCURVE_S1.);+#7024 = LINE('',#7025,#7026);+#7025 = CARTESIAN_POINT('',(0.350022821461,0.66072894524,0.59710515));+#7026 = VECTOR('',#7027,1.);+#7027 = DIRECTION('',(1.,0.,0.));+#7028 = PCURVE('',#6960,#7029);+#7029 = DEFINITIONAL_REPRESENTATION('',(#7030),#7034);+#7030 = LINE('',#7031,#7032);+#7031 = CARTESIAN_POINT('',(4.0970056181E-02,6.8040371388E-02));+#7032 = VECTOR('',#7033,1.);+#7033 = DIRECTION('',(1.,0.));+#7034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7035 = ORIENTED_EDGE('',*,*,#7036,.T.);+#7036 = EDGE_CURVE('',#7021,#7037,#7039,.T.);+#7037 = VERTEX_POINT('',#7038);+#7038 = CARTESIAN_POINT('',(0.358909541099,0.592688573852,0.59710515)); #7039 = SURFACE_CURVE('',#7040,(#7044),.PCURVE_S1.);-#7040 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7041,#7042,#7043),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#7041 = CARTESIAN_POINT('',(0.178645833333,-1.9755859375E-02,0.9350001)- );-#7042 = CARTESIAN_POINT('',(0.181722005208,-1.335286458333E-02,0.9350001- ));-#7043 = CARTESIAN_POINT('',(0.181722005208,1.640625E-03,0.9350001));-#7044 = PCURVE('',#6720,#7045);+#7040 = LINE('',#7041,#7042);+#7041 = CARTESIAN_POINT('',(0.358909541099,0.66072894524,0.59710515));+#7042 = VECTOR('',#7043,1.);+#7043 = DIRECTION('',(0.,-1.,0.));+#7044 = PCURVE('',#6960,#7045); #7045 = DEFINITIONAL_REPRESENTATION('',(#7046),#7050);-#7046 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7047,#7048,#7049),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#7047 = CARTESIAN_POINT('',(3.8167317708E-02,1.255533854167E-02));-#7048 = CARTESIAN_POINT('',(4.1243489583E-02,1.895833333334E-02));-#7049 = CARTESIAN_POINT('',(4.1243489583E-02,3.395182291667E-02));+#7046 = LINE('',#7047,#7048);+#7047 = CARTESIAN_POINT('',(4.9856775819E-02,6.8040371388E-02));+#7048 = VECTOR('',#7049,1.);+#7049 = DIRECTION('',(0.,-1.)); #7050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7051 = SHELL_BASED_SURFACE_MODEL('',(#7052));-#7052 = OPEN_SHELL('',(#7053));-#7053 = ADVANCED_FACE('',(#7054),#7068,.T.);-#7054 = FACE_BOUND('',#7055,.F.);-#7055 = EDGE_LOOP('',(#7056,#7079,#7095,#7111,#7127,#7143,#7159,#7175,- #7191,#7207));-#7056 = ORIENTED_EDGE('',*,*,#7057,.T.);-#7057 = EDGE_CURVE('',#7058,#7060,#7062,.T.);-#7058 = VERTEX_POINT('',#7059);-#7059 = CARTESIAN_POINT('',(0.203004557292,-3.231119791667E-02,0.9350001- ));-#7060 = VERTEX_POINT('',#7061);-#7061 = CARTESIAN_POINT('',(0.203004557292,3.572916666667E-02,0.9350001)- );-#7062 = SURFACE_CURVE('',#7063,(#7067),.PCURVE_S1.);-#7063 = LINE('',#7064,#7065);-#7064 = CARTESIAN_POINT('',(0.203004557292,-3.231119791667E-02,0.9350001- ));-#7065 = VECTOR('',#7066,1.);-#7066 = DIRECTION('',(0.,1.,0.));-#7067 = PCURVE('',#7068,#7073);-#7068 = PLANE('',#7069);-#7069 = AXIS2_PLACEMENT_3D('',#7070,#7071,#7072);-#7070 = CARTESIAN_POINT('',(0.196669921875,-3.231119791667E-02,0.9350001- ));-#7071 = DIRECTION('',(0.,0.,1.));-#7072 = DIRECTION('',(1.,0.,-0.));-#7073 = DEFINITIONAL_REPRESENTATION('',(#7074),#7078);-#7074 = LINE('',#7075,#7076);-#7075 = CARTESIAN_POINT('',(6.334635417E-03,0.));-#7076 = VECTOR('',#7077,1.);-#7077 = DIRECTION('',(0.,1.));-#7078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7079 = ORIENTED_EDGE('',*,*,#7080,.T.);-#7080 = EDGE_CURVE('',#7060,#7081,#7083,.T.);-#7081 = VERTEX_POINT('',#7082);-#7082 = CARTESIAN_POINT('',(0.214671223958,3.572916666667E-02,0.9350001)- );-#7083 = SURFACE_CURVE('',#7084,(#7088),.PCURVE_S1.);-#7084 = LINE('',#7085,#7086);-#7085 = CARTESIAN_POINT('',(0.203004557292,3.572916666667E-02,0.9350001)- );-#7086 = VECTOR('',#7087,1.);-#7087 = DIRECTION('',(1.,0.,0.));-#7088 = PCURVE('',#7068,#7089);-#7089 = DEFINITIONAL_REPRESENTATION('',(#7090),#7094);-#7090 = LINE('',#7091,#7092);-#7091 = CARTESIAN_POINT('',(6.334635417E-03,6.804036458334E-02));-#7092 = VECTOR('',#7093,1.);-#7093 = DIRECTION('',(1.,0.));-#7094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7095 = ORIENTED_EDGE('',*,*,#7096,.T.);-#7096 = EDGE_CURVE('',#7081,#7097,#7099,.T.);-#7097 = VERTEX_POINT('',#7098);-#7098 = CARTESIAN_POINT('',(0.237639973958,-2.027994791667E-02,0.9350001- ));-#7099 = SURFACE_CURVE('',#7100,(#7104),.PCURVE_S1.);-#7100 = LINE('',#7101,#7102);-#7101 = CARTESIAN_POINT('',(0.214671223958,3.572916666667E-02,0.9350001)- );-#7102 = VECTOR('',#7103,1.);-#7103 = DIRECTION('',(0.379424173637,-0.92522283611,0.));-#7104 = PCURVE('',#7068,#7105);-#7105 = DEFINITIONAL_REPRESENTATION('',(#7106),#7110);-#7106 = LINE('',#7107,#7108);-#7107 = CARTESIAN_POINT('',(1.8001302083E-02,6.804036458334E-02));-#7108 = VECTOR('',#7109,1.);-#7109 = DIRECTION('',(0.379424173637,-0.92522283611));-#7110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7111 = ORIENTED_EDGE('',*,*,#7112,.T.);-#7112 = EDGE_CURVE('',#7097,#7113,#7115,.T.);-#7113 = VERTEX_POINT('',#7114);-#7114 = CARTESIAN_POINT('',(0.237639973958,3.572916666667E-02,0.9350001)- );-#7115 = SURFACE_CURVE('',#7116,(#7120),.PCURVE_S1.);-#7116 = LINE('',#7117,#7118);-#7117 = CARTESIAN_POINT('',(0.237639973958,-2.027994791667E-02,0.9350001- ));-#7118 = VECTOR('',#7119,1.);-#7119 = DIRECTION('',(0.,1.,0.));-#7120 = PCURVE('',#7068,#7121);-#7121 = DEFINITIONAL_REPRESENTATION('',(#7122),#7126);-#7122 = LINE('',#7123,#7124);-#7123 = CARTESIAN_POINT('',(4.0970052083E-02,1.203125E-02));-#7124 = VECTOR('',#7125,1.);-#7125 = DIRECTION('',(0.,1.));-#7126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7127 = ORIENTED_EDGE('',*,*,#7128,.T.);-#7128 = EDGE_CURVE('',#7113,#7129,#7131,.T.);-#7129 = VERTEX_POINT('',#7130);-#7130 = CARTESIAN_POINT('',(0.246526692708,3.572916666667E-02,0.9350001)- );-#7131 = SURFACE_CURVE('',#7132,(#7136),.PCURVE_S1.);-#7132 = LINE('',#7133,#7134);-#7133 = CARTESIAN_POINT('',(0.237639973958,3.572916666667E-02,0.9350001)- );-#7134 = VECTOR('',#7135,1.);-#7135 = DIRECTION('',(1.,0.,0.));-#7136 = PCURVE('',#7068,#7137);-#7137 = DEFINITIONAL_REPRESENTATION('',(#7138),#7142);-#7138 = LINE('',#7139,#7140);-#7139 = CARTESIAN_POINT('',(4.0970052083E-02,6.804036458334E-02));-#7140 = VECTOR('',#7141,1.);-#7141 = DIRECTION('',(1.,0.));-#7142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7143 = ORIENTED_EDGE('',*,*,#7144,.T.);-#7144 = EDGE_CURVE('',#7129,#7145,#7147,.T.);-#7145 = VERTEX_POINT('',#7146);-#7146 = CARTESIAN_POINT('',(0.246526692708,-3.231119791667E-02,0.9350001- ));-#7147 = SURFACE_CURVE('',#7148,(#7152),.PCURVE_S1.);-#7148 = LINE('',#7149,#7150);-#7149 = CARTESIAN_POINT('',(0.246526692708,3.572916666667E-02,0.9350001)- );-#7150 = VECTOR('',#7151,1.);-#7151 = DIRECTION('',(0.,-1.,0.));-#7152 = PCURVE('',#7068,#7153);-#7153 = DEFINITIONAL_REPRESENTATION('',(#7154),#7158);-#7154 = LINE('',#7155,#7156);-#7155 = CARTESIAN_POINT('',(4.9856770833E-02,6.804036458334E-02));-#7156 = VECTOR('',#7157,1.);-#7157 = DIRECTION('',(0.,-1.));-#7158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7159 = ORIENTED_EDGE('',*,*,#7160,.T.);-#7160 = EDGE_CURVE('',#7145,#7161,#7163,.T.);-#7161 = VERTEX_POINT('',#7162);-#7162 = CARTESIAN_POINT('',(0.234860026042,-3.231119791667E-02,0.9350001- ));-#7163 = SURFACE_CURVE('',#7164,(#7168),.PCURVE_S1.);-#7164 = LINE('',#7165,#7166);-#7165 = CARTESIAN_POINT('',(0.246526692708,-3.231119791667E-02,0.9350001- ));-#7166 = VECTOR('',#7167,1.);-#7167 = DIRECTION('',(-1.,0.,0.));-#7168 = PCURVE('',#7068,#7169);-#7169 = DEFINITIONAL_REPRESENTATION('',(#7170),#7174);-#7170 = LINE('',#7171,#7172);-#7171 = CARTESIAN_POINT('',(4.9856770833E-02,0.));-#7172 = VECTOR('',#7173,1.);-#7173 = DIRECTION('',(-1.,0.));-#7174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7175 = ORIENTED_EDGE('',*,*,#7176,.T.);-#7176 = EDGE_CURVE('',#7161,#7177,#7179,.T.);-#7177 = VERTEX_POINT('',#7178);-#7178 = CARTESIAN_POINT('',(0.211891276042,2.369791666667E-02,0.9350001)- );-#7179 = SURFACE_CURVE('',#7180,(#7184),.PCURVE_S1.);-#7180 = LINE('',#7181,#7182);-#7181 = CARTESIAN_POINT('',(0.234860026042,-3.231119791667E-02,0.9350001- ));-#7182 = VECTOR('',#7183,1.);-#7183 = DIRECTION('',(-0.379424173637,0.92522283611,0.));-#7184 = PCURVE('',#7068,#7185);-#7185 = DEFINITIONAL_REPRESENTATION('',(#7186),#7190);-#7186 = LINE('',#7187,#7188);-#7187 = CARTESIAN_POINT('',(3.8190104167E-02,0.));-#7188 = VECTOR('',#7189,1.);-#7189 = DIRECTION('',(-0.379424173637,0.92522283611));-#7190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7191 = ORIENTED_EDGE('',*,*,#7192,.T.);-#7192 = EDGE_CURVE('',#7177,#7193,#7195,.T.);-#7193 = VERTEX_POINT('',#7194);-#7194 = CARTESIAN_POINT('',(0.211891276042,-3.231119791667E-02,0.9350001- ));-#7195 = SURFACE_CURVE('',#7196,(#7200),.PCURVE_S1.);-#7196 = LINE('',#7197,#7198);-#7197 = CARTESIAN_POINT('',(0.211891276042,2.369791666667E-02,0.9350001)- );-#7198 = VECTOR('',#7199,1.);-#7199 = DIRECTION('',(0.,-1.,0.));-#7200 = PCURVE('',#7068,#7201);-#7201 = DEFINITIONAL_REPRESENTATION('',(#7202),#7206);-#7202 = LINE('',#7203,#7204);-#7203 = CARTESIAN_POINT('',(1.5221354167E-02,5.600911458334E-02));-#7204 = VECTOR('',#7205,1.);-#7205 = DIRECTION('',(0.,-1.));-#7206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7207 = ORIENTED_EDGE('',*,*,#7208,.T.);-#7208 = EDGE_CURVE('',#7193,#7058,#7209,.T.);+#7051 = ORIENTED_EDGE('',*,*,#7052,.T.);+#7052 = EDGE_CURVE('',#7037,#7053,#7055,.T.);+#7053 = VERTEX_POINT('',#7054);+#7054 = CARTESIAN_POINT('',(0.347242873266,0.592688573852,0.59710515));+#7055 = SURFACE_CURVE('',#7056,(#7060),.PCURVE_S1.);+#7056 = LINE('',#7057,#7058);+#7057 = CARTESIAN_POINT('',(0.358909541099,0.592688573852,0.59710515));+#7058 = VECTOR('',#7059,1.);+#7059 = DIRECTION('',(-1.,0.,0.));+#7060 = PCURVE('',#6960,#7061);+#7061 = DEFINITIONAL_REPRESENTATION('',(#7062),#7066);+#7062 = LINE('',#7063,#7064);+#7063 = CARTESIAN_POINT('',(4.9856775819E-02,0.));+#7064 = VECTOR('',#7065,1.);+#7065 = DIRECTION('',(-1.,0.));+#7066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7067 = ORIENTED_EDGE('',*,*,#7068,.T.);+#7068 = EDGE_CURVE('',#7053,#7069,#7071,.T.);+#7069 = VERTEX_POINT('',#7070);+#7070 = CARTESIAN_POINT('',(0.324274120969,0.648697694036,0.59710515));+#7071 = SURFACE_CURVE('',#7072,(#7076),.PCURVE_S1.);+#7072 = LINE('',#7073,#7074);+#7073 = CARTESIAN_POINT('',(0.347242873266,0.592688573852,0.59710515));+#7074 = VECTOR('',#7075,1.);+#7075 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#7076 = PCURVE('',#6960,#7077);+#7077 = DEFINITIONAL_REPRESENTATION('',(#7078),#7082);+#7078 = LINE('',#7079,#7080);+#7079 = CARTESIAN_POINT('',(3.8190107986E-02,0.));+#7080 = VECTOR('',#7081,1.);+#7081 = DIRECTION('',(-0.379424173637,0.92522283611));+#7082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7083 = ORIENTED_EDGE('',*,*,#7084,.T.);+#7084 = EDGE_CURVE('',#7069,#7085,#7087,.T.);+#7085 = VERTEX_POINT('',#7086);+#7086 = CARTESIAN_POINT('',(0.324274120969,0.592688573852,0.59710515));+#7087 = SURFACE_CURVE('',#7088,(#7092),.PCURVE_S1.);+#7088 = LINE('',#7089,#7090);+#7089 = CARTESIAN_POINT('',(0.324274120969,0.648697694036,0.59710515));+#7090 = VECTOR('',#7091,1.);+#7091 = DIRECTION('',(0.,-1.,0.));+#7092 = PCURVE('',#6960,#7093);+#7093 = DEFINITIONAL_REPRESENTATION('',(#7094),#7098);+#7094 = LINE('',#7095,#7096);+#7095 = CARTESIAN_POINT('',(1.5221355689E-02,5.6009120184E-02));+#7096 = VECTOR('',#7097,1.);+#7097 = DIRECTION('',(0.,-1.));+#7098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7099 = ORIENTED_EDGE('',*,*,#7100,.T.);+#7100 = EDGE_CURVE('',#7085,#6950,#7101,.T.);+#7101 = SURFACE_CURVE('',#7102,(#7106),.PCURVE_S1.);+#7102 = LINE('',#7103,#7104);+#7103 = CARTESIAN_POINT('',(0.324274120969,0.592688573852,0.59710515));+#7104 = VECTOR('',#7105,1.);+#7105 = DIRECTION('',(-1.,0.,0.));+#7106 = PCURVE('',#6960,#7107);+#7107 = DEFINITIONAL_REPRESENTATION('',(#7108),#7112);+#7108 = LINE('',#7109,#7110);+#7109 = CARTESIAN_POINT('',(1.5221355689E-02,0.));+#7110 = VECTOR('',#7111,1.);+#7111 = DIRECTION('',(-1.,0.));+#7112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7113 = SHELL_BASED_SURFACE_MODEL('',(#7114));+#7114 = OPEN_SHELL('',(#7115));+#7115 = ADVANCED_FACE('',(#7116),#7130,.T.);+#7116 = FACE_BOUND('',#7117,.F.);+#7117 = EDGE_LOOP('',(#7118,#7141,#7157,#7173,#7189,#7205,#7221,#7237,+ #7253,#7269,#7285,#7301));+#7118 = ORIENTED_EDGE('',*,*,#7119,.T.);+#7119 = EDGE_CURVE('',#7120,#7122,#7124,.T.);+#7120 = VERTEX_POINT('',#7121);+#7121 = CARTESIAN_POINT('',(0.374222042631,0.592688573852,0.59710515));+#7122 = VERTEX_POINT('',#7123);+#7123 = CARTESIAN_POINT('',(0.374222042631,0.66072894524,0.59710515));+#7124 = SURFACE_CURVE('',#7125,(#7129),.PCURVE_S1.);+#7125 = LINE('',#7126,#7127);+#7126 = CARTESIAN_POINT('',(0.374222042631,0.592688573852,0.59710515));+#7127 = VECTOR('',#7128,1.);+#7128 = DIRECTION('',(0.,1.,0.));+#7129 = PCURVE('',#7130,#7135);+#7130 = PLANE('',#7131);+#7131 = AXIS2_PLACEMENT_3D('',#7132,#7133,#7134);+#7132 = CARTESIAN_POINT('',(0.365244177149,0.592688573852,0.59710515));+#7133 = DIRECTION('',(0.,0.,1.));+#7134 = DIRECTION('',(1.,0.,-0.));+#7135 = DEFINITIONAL_REPRESENTATION('',(#7136),#7140);+#7136 = LINE('',#7137,#7138);+#7137 = CARTESIAN_POINT('',(8.977865482E-03,0.));+#7138 = VECTOR('',#7139,1.);+#7139 = DIRECTION('',(0.,1.));+#7140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7141 = ORIENTED_EDGE('',*,*,#7142,.T.);+#7142 = EDGE_CURVE('',#7122,#7143,#7145,.T.);+#7143 = VERTEX_POINT('',#7144);+#7144 = CARTESIAN_POINT('',(0.414599650835,0.66072894524,0.59710515));+#7145 = SURFACE_CURVE('',#7146,(#7150),.PCURVE_S1.);+#7146 = LINE('',#7147,#7148);+#7147 = CARTESIAN_POINT('',(0.374222042631,0.66072894524,0.59710515));+#7148 = VECTOR('',#7149,1.);+#7149 = DIRECTION('',(1.,0.,0.));+#7150 = PCURVE('',#7130,#7151);+#7151 = DEFINITIONAL_REPRESENTATION('',(#7152),#7156);+#7152 = LINE('',#7153,#7154);+#7153 = CARTESIAN_POINT('',(8.977865482E-03,6.8040371388E-02));+#7154 = VECTOR('',#7155,1.);+#7155 = DIRECTION('',(1.,0.));+#7156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7157 = ORIENTED_EDGE('',*,*,#7158,.T.);+#7158 = EDGE_CURVE('',#7143,#7159,#7161,.T.);+#7159 = VERTEX_POINT('',#7160);+#7160 = CARTESIAN_POINT('',(0.414599650835,0.652981548632,0.59710515));+#7161 = SURFACE_CURVE('',#7162,(#7166),.PCURVE_S1.);+#7162 = LINE('',#7163,#7164);+#7163 = CARTESIAN_POINT('',(0.414599650835,0.66072894524,0.59710515));+#7164 = VECTOR('',#7165,1.);+#7165 = DIRECTION('',(0.,-1.,0.));+#7166 = PCURVE('',#7130,#7167);+#7167 = DEFINITIONAL_REPRESENTATION('',(#7168),#7172);+#7168 = LINE('',#7169,#7170);+#7169 = CARTESIAN_POINT('',(4.9355473686E-02,6.8040371388E-02));+#7170 = VECTOR('',#7171,1.);+#7171 = DIRECTION('',(0.,-1.));+#7172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7173 = ORIENTED_EDGE('',*,*,#7174,.T.);+#7174 = EDGE_CURVE('',#7159,#7175,#7177,.T.);+#7175 = VERTEX_POINT('',#7176);+#7176 = CARTESIAN_POINT('',(0.383427772718,0.652981548632,0.59710515));+#7177 = SURFACE_CURVE('',#7178,(#7182),.PCURVE_S1.);+#7178 = LINE('',#7179,#7180);+#7179 = CARTESIAN_POINT('',(0.414599650835,0.652981548632,0.59710515));+#7180 = VECTOR('',#7181,1.);+#7181 = DIRECTION('',(-1.,0.,0.));+#7182 = PCURVE('',#7130,#7183);+#7183 = DEFINITIONAL_REPRESENTATION('',(#7184),#7188);+#7184 = LINE('',#7185,#7186);+#7185 = CARTESIAN_POINT('',(4.9355473686E-02,6.029297478E-02));+#7186 = VECTOR('',#7187,1.);+#7187 = DIRECTION('',(-1.,0.));+#7188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7189 = ORIENTED_EDGE('',*,*,#7190,.T.);+#7190 = EDGE_CURVE('',#7175,#7191,#7193,.T.);+#7191 = VERTEX_POINT('',#7192);+#7192 = CARTESIAN_POINT('',(0.383427772718,0.632838317451,0.59710515));+#7193 = SURFACE_CURVE('',#7194,(#7198),.PCURVE_S1.);+#7194 = LINE('',#7195,#7196);+#7195 = CARTESIAN_POINT('',(0.383427772718,0.652981548632,0.59710515));+#7196 = VECTOR('',#7197,1.);+#7197 = DIRECTION('',(0.,-1.,0.));+#7198 = PCURVE('',#7130,#7199);+#7199 = DEFINITIONAL_REPRESENTATION('',(#7200),#7204);+#7200 = LINE('',#7201,#7202);+#7201 = CARTESIAN_POINT('',(1.8183595569E-02,6.029297478E-02));+#7202 = VECTOR('',#7203,1.);+#7203 = DIRECTION('',(0.,-1.));+#7204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7205 = ORIENTED_EDGE('',*,*,#7206,.T.);+#7206 = EDGE_CURVE('',#7191,#7207,#7209,.T.);+#7207 = VERTEX_POINT('',#7208);+#7208 = CARTESIAN_POINT('',(0.413232463198,0.632838317451,0.59710515)); #7209 = SURFACE_CURVE('',#7210,(#7214),.PCURVE_S1.); #7210 = LINE('',#7211,#7212);-#7211 = CARTESIAN_POINT('',(0.211891276042,-3.231119791667E-02,0.9350001- ));+#7211 = CARTESIAN_POINT('',(0.383427772718,0.632838317451,0.59710515)); #7212 = VECTOR('',#7213,1.);-#7213 = DIRECTION('',(-1.,0.,0.));-#7214 = PCURVE('',#7068,#7215);+#7213 = DIRECTION('',(1.,0.,0.));+#7214 = PCURVE('',#7130,#7215); #7215 = DEFINITIONAL_REPRESENTATION('',(#7216),#7220); #7216 = LINE('',#7217,#7218);-#7217 = CARTESIAN_POINT('',(1.5221354167E-02,0.));+#7217 = CARTESIAN_POINT('',(1.8183595569E-02,4.0149743599E-02)); #7218 = VECTOR('',#7219,1.);-#7219 = DIRECTION('',(-1.,0.));+#7219 = DIRECTION('',(1.,0.)); #7220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7221 = SHELL_BASED_SURFACE_MODEL('',(#7222));-#7222 = OPEN_SHELL('',(#7223));-#7223 = ADVANCED_FACE('',(#7224),#7238,.T.);-#7224 = FACE_BOUND('',#7225,.F.);-#7225 = EDGE_LOOP('',(#7226,#7249,#7265,#7281,#7297,#7313,#7329,#7345,- #7361,#7377));-#7226 = ORIENTED_EDGE('',*,*,#7227,.T.);-#7227 = EDGE_CURVE('',#7228,#7230,#7232,.T.);-#7228 = VERTEX_POINT('',#7229);-#7229 = CARTESIAN_POINT('',(0.259195963542,-3.231119791667E-02,0.9350001- ));-#7230 = VERTEX_POINT('',#7231);-#7231 = CARTESIAN_POINT('',(0.259195963542,3.572916666667E-02,0.9350001)- );-#7232 = SURFACE_CURVE('',#7233,(#7237),.PCURVE_S1.);-#7233 = LINE('',#7234,#7235);-#7234 = CARTESIAN_POINT('',(0.259195963542,-3.231119791667E-02,0.9350001- ));-#7235 = VECTOR('',#7236,1.);-#7236 = DIRECTION('',(0.,1.,0.));-#7237 = PCURVE('',#7238,#7243);-#7238 = PLANE('',#7239);-#7239 = AXIS2_PLACEMENT_3D('',#7240,#7241,#7242);-#7240 = CARTESIAN_POINT('',(0.252861328125,-3.231119791667E-02,0.9350001- ));-#7241 = DIRECTION('',(0.,0.,1.));-#7242 = DIRECTION('',(1.,0.,-0.));-#7243 = DEFINITIONAL_REPRESENTATION('',(#7244),#7248);-#7244 = LINE('',#7245,#7246);-#7245 = CARTESIAN_POINT('',(6.334635417E-03,0.));-#7246 = VECTOR('',#7247,1.);-#7247 = DIRECTION('',(0.,1.));-#7248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7249 = ORIENTED_EDGE('',*,*,#7250,.T.);-#7250 = EDGE_CURVE('',#7230,#7251,#7253,.T.);-#7251 = VERTEX_POINT('',#7252);-#7252 = CARTESIAN_POINT('',(0.270862630208,3.572916666667E-02,0.9350001)- );-#7253 = SURFACE_CURVE('',#7254,(#7258),.PCURVE_S1.);-#7254 = LINE('',#7255,#7256);-#7255 = CARTESIAN_POINT('',(0.259195963542,3.572916666667E-02,0.9350001)- );-#7256 = VECTOR('',#7257,1.);-#7257 = DIRECTION('',(1.,0.,0.));-#7258 = PCURVE('',#7238,#7259);-#7259 = DEFINITIONAL_REPRESENTATION('',(#7260),#7264);-#7260 = LINE('',#7261,#7262);-#7261 = CARTESIAN_POINT('',(6.334635417E-03,6.804036458334E-02));-#7262 = VECTOR('',#7263,1.);-#7263 = DIRECTION('',(1.,0.));-#7264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7265 = ORIENTED_EDGE('',*,*,#7266,.T.);-#7266 = EDGE_CURVE('',#7251,#7267,#7269,.T.);-#7267 = VERTEX_POINT('',#7268);-#7268 = CARTESIAN_POINT('',(0.293831380208,-2.027994791667E-02,0.9350001- ));-#7269 = SURFACE_CURVE('',#7270,(#7274),.PCURVE_S1.);-#7270 = LINE('',#7271,#7272);-#7271 = CARTESIAN_POINT('',(0.270862630208,3.572916666667E-02,0.9350001)- );-#7272 = VECTOR('',#7273,1.);-#7273 = DIRECTION('',(0.379424173637,-0.92522283611,0.));-#7274 = PCURVE('',#7238,#7275);-#7275 = DEFINITIONAL_REPRESENTATION('',(#7276),#7280);-#7276 = LINE('',#7277,#7278);-#7277 = CARTESIAN_POINT('',(1.8001302083E-02,6.804036458334E-02));-#7278 = VECTOR('',#7279,1.);-#7279 = DIRECTION('',(0.379424173637,-0.92522283611));-#7280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7281 = ORIENTED_EDGE('',*,*,#7282,.T.);-#7282 = EDGE_CURVE('',#7267,#7283,#7285,.T.);-#7283 = VERTEX_POINT('',#7284);-#7284 = CARTESIAN_POINT('',(0.293831380208,3.572916666667E-02,0.9350001)- );-#7285 = SURFACE_CURVE('',#7286,(#7290),.PCURVE_S1.);-#7286 = LINE('',#7287,#7288);-#7287 = CARTESIAN_POINT('',(0.293831380208,-2.027994791667E-02,0.9350001- ));-#7288 = VECTOR('',#7289,1.);-#7289 = DIRECTION('',(0.,1.,0.));-#7290 = PCURVE('',#7238,#7291);-#7291 = DEFINITIONAL_REPRESENTATION('',(#7292),#7296);-#7292 = LINE('',#7293,#7294);-#7293 = CARTESIAN_POINT('',(4.0970052083E-02,1.203125E-02));-#7294 = VECTOR('',#7295,1.);-#7295 = DIRECTION('',(0.,1.));-#7296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7297 = ORIENTED_EDGE('',*,*,#7298,.T.);-#7298 = EDGE_CURVE('',#7283,#7299,#7301,.T.);-#7299 = VERTEX_POINT('',#7300);-#7300 = CARTESIAN_POINT('',(0.302718098958,3.572916666667E-02,0.9350001)- );-#7301 = SURFACE_CURVE('',#7302,(#7306),.PCURVE_S1.);-#7302 = LINE('',#7303,#7304);-#7303 = CARTESIAN_POINT('',(0.293831380208,3.572916666667E-02,0.9350001)- );-#7304 = VECTOR('',#7305,1.);-#7305 = DIRECTION('',(1.,0.,0.));-#7306 = PCURVE('',#7238,#7307);-#7307 = DEFINITIONAL_REPRESENTATION('',(#7308),#7312);-#7308 = LINE('',#7309,#7310);-#7309 = CARTESIAN_POINT('',(4.0970052083E-02,6.804036458334E-02));-#7310 = VECTOR('',#7311,1.);-#7311 = DIRECTION('',(1.,0.));-#7312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7313 = ORIENTED_EDGE('',*,*,#7314,.T.);-#7314 = EDGE_CURVE('',#7299,#7315,#7317,.T.);-#7315 = VERTEX_POINT('',#7316);-#7316 = CARTESIAN_POINT('',(0.302718098958,-3.231119791667E-02,0.9350001- ));-#7317 = SURFACE_CURVE('',#7318,(#7322),.PCURVE_S1.);-#7318 = LINE('',#7319,#7320);-#7319 = CARTESIAN_POINT('',(0.302718098958,3.572916666667E-02,0.9350001)- );-#7320 = VECTOR('',#7321,1.);-#7321 = DIRECTION('',(0.,-1.,0.));-#7322 = PCURVE('',#7238,#7323);-#7323 = DEFINITIONAL_REPRESENTATION('',(#7324),#7328);-#7324 = LINE('',#7325,#7326);-#7325 = CARTESIAN_POINT('',(4.9856770833E-02,6.804036458334E-02));-#7326 = VECTOR('',#7327,1.);-#7327 = DIRECTION('',(0.,-1.));-#7328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7329 = ORIENTED_EDGE('',*,*,#7330,.T.);-#7330 = EDGE_CURVE('',#7315,#7331,#7333,.T.);-#7331 = VERTEX_POINT('',#7332);-#7332 = CARTESIAN_POINT('',(0.291051432292,-3.231119791667E-02,0.9350001- ));-#7333 = SURFACE_CURVE('',#7334,(#7338),.PCURVE_S1.);-#7334 = LINE('',#7335,#7336);-#7335 = CARTESIAN_POINT('',(0.302718098958,-3.231119791667E-02,0.9350001- ));-#7336 = VECTOR('',#7337,1.);-#7337 = DIRECTION('',(-1.,0.,0.));-#7338 = PCURVE('',#7238,#7339);-#7339 = DEFINITIONAL_REPRESENTATION('',(#7340),#7344);-#7340 = LINE('',#7341,#7342);-#7341 = CARTESIAN_POINT('',(4.9856770833E-02,0.));-#7342 = VECTOR('',#7343,1.);-#7343 = DIRECTION('',(-1.,0.));-#7344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7345 = ORIENTED_EDGE('',*,*,#7346,.T.);-#7346 = EDGE_CURVE('',#7331,#7347,#7349,.T.);-#7347 = VERTEX_POINT('',#7348);-#7348 = CARTESIAN_POINT('',(0.268082682292,2.369791666667E-02,0.9350001)- );-#7349 = SURFACE_CURVE('',#7350,(#7354),.PCURVE_S1.);-#7350 = LINE('',#7351,#7352);-#7351 = CARTESIAN_POINT('',(0.291051432292,-3.231119791667E-02,0.9350001- ));-#7352 = VECTOR('',#7353,1.);-#7353 = DIRECTION('',(-0.379424173637,0.92522283611,0.));-#7354 = PCURVE('',#7238,#7355);-#7355 = DEFINITIONAL_REPRESENTATION('',(#7356),#7360);-#7356 = LINE('',#7357,#7358);-#7357 = CARTESIAN_POINT('',(3.8190104167E-02,0.));-#7358 = VECTOR('',#7359,1.);-#7359 = DIRECTION('',(-0.379424173637,0.92522283611));-#7360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7361 = ORIENTED_EDGE('',*,*,#7362,.T.);-#7362 = EDGE_CURVE('',#7347,#7363,#7365,.T.);-#7363 = VERTEX_POINT('',#7364);-#7364 = CARTESIAN_POINT('',(0.268082682292,-3.231119791667E-02,0.9350001- ));-#7365 = SURFACE_CURVE('',#7366,(#7370),.PCURVE_S1.);-#7366 = LINE('',#7367,#7368);-#7367 = CARTESIAN_POINT('',(0.268082682292,2.369791666667E-02,0.9350001)- );-#7368 = VECTOR('',#7369,1.);-#7369 = DIRECTION('',(0.,-1.,0.));-#7370 = PCURVE('',#7238,#7371);-#7371 = DEFINITIONAL_REPRESENTATION('',(#7372),#7376);-#7372 = LINE('',#7373,#7374);-#7373 = CARTESIAN_POINT('',(1.5221354167E-02,5.600911458334E-02));-#7374 = VECTOR('',#7375,1.);-#7375 = DIRECTION('',(0.,-1.));-#7376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7377 = ORIENTED_EDGE('',*,*,#7378,.T.);-#7378 = EDGE_CURVE('',#7363,#7228,#7379,.T.);-#7379 = SURFACE_CURVE('',#7380,(#7384),.PCURVE_S1.);-#7380 = LINE('',#7381,#7382);-#7381 = CARTESIAN_POINT('',(0.268082682292,-3.231119791667E-02,0.9350001- ));-#7382 = VECTOR('',#7383,1.);-#7383 = DIRECTION('',(-1.,0.,0.));-#7384 = PCURVE('',#7238,#7385);-#7385 = DEFINITIONAL_REPRESENTATION('',(#7386),#7390);-#7386 = LINE('',#7387,#7388);-#7387 = CARTESIAN_POINT('',(1.5221354167E-02,0.));-#7388 = VECTOR('',#7389,1.);-#7389 = DIRECTION('',(-1.,0.));-#7390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7391 = SHELL_BASED_SURFACE_MODEL('',(#7392));-#7392 = OPEN_SHELL('',(#7393));-#7393 = ADVANCED_FACE('',(#7394),#7408,.T.);-#7394 = FACE_BOUND('',#7395,.F.);-#7395 = EDGE_LOOP('',(#7396,#7419,#7435,#7451,#7467,#7483,#7499,#7515,- #7531,#7547));-#7396 = ORIENTED_EDGE('',*,*,#7397,.T.);-#7397 = EDGE_CURVE('',#7398,#7400,#7402,.T.);-#7398 = VERTEX_POINT('',#7399);-#7399 = CARTESIAN_POINT('',(0.315387369792,-3.231119791667E-02,0.9350001- ));-#7400 = VERTEX_POINT('',#7401);-#7401 = CARTESIAN_POINT('',(0.315387369792,3.572916666667E-02,0.9350001)- );-#7402 = SURFACE_CURVE('',#7403,(#7407),.PCURVE_S1.);-#7403 = LINE('',#7404,#7405);-#7404 = CARTESIAN_POINT('',(0.315387369792,-3.231119791667E-02,0.9350001- ));-#7405 = VECTOR('',#7406,1.);-#7406 = DIRECTION('',(0.,1.,0.));-#7407 = PCURVE('',#7408,#7413);-#7408 = PLANE('',#7409);-#7409 = AXIS2_PLACEMENT_3D('',#7410,#7411,#7412);-#7410 = CARTESIAN_POINT('',(0.309052734375,-3.231119791667E-02,0.9350001- ));-#7411 = DIRECTION('',(0.,0.,1.));-#7412 = DIRECTION('',(1.,0.,-0.));-#7413 = DEFINITIONAL_REPRESENTATION('',(#7414),#7418);-#7414 = LINE('',#7415,#7416);-#7415 = CARTESIAN_POINT('',(6.334635417E-03,0.));-#7416 = VECTOR('',#7417,1.);-#7417 = DIRECTION('',(0.,1.));-#7418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7419 = ORIENTED_EDGE('',*,*,#7420,.T.);-#7420 = EDGE_CURVE('',#7400,#7421,#7423,.T.);-#7421 = VERTEX_POINT('',#7422);-#7422 = CARTESIAN_POINT('',(0.327054036458,3.572916666667E-02,0.9350001)- );-#7423 = SURFACE_CURVE('',#7424,(#7428),.PCURVE_S1.);-#7424 = LINE('',#7425,#7426);-#7425 = CARTESIAN_POINT('',(0.315387369792,3.572916666667E-02,0.9350001)- );-#7426 = VECTOR('',#7427,1.);-#7427 = DIRECTION('',(1.,0.,0.));-#7428 = PCURVE('',#7408,#7429);-#7429 = DEFINITIONAL_REPRESENTATION('',(#7430),#7434);-#7430 = LINE('',#7431,#7432);-#7431 = CARTESIAN_POINT('',(6.334635417E-03,6.804036458334E-02));-#7432 = VECTOR('',#7433,1.);-#7433 = DIRECTION('',(1.,0.));-#7434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7435 = ORIENTED_EDGE('',*,*,#7436,.T.);-#7436 = EDGE_CURVE('',#7421,#7437,#7439,.T.);-#7437 = VERTEX_POINT('',#7438);-#7438 = CARTESIAN_POINT('',(0.350022786458,-2.027994791667E-02,0.9350001- ));-#7439 = SURFACE_CURVE('',#7440,(#7444),.PCURVE_S1.);-#7440 = LINE('',#7441,#7442);-#7441 = CARTESIAN_POINT('',(0.327054036458,3.572916666667E-02,0.9350001)- );-#7442 = VECTOR('',#7443,1.);-#7443 = DIRECTION('',(0.379424173637,-0.92522283611,0.));-#7444 = PCURVE('',#7408,#7445);-#7445 = DEFINITIONAL_REPRESENTATION('',(#7446),#7450);-#7446 = LINE('',#7447,#7448);-#7447 = CARTESIAN_POINT('',(1.8001302083E-02,6.804036458334E-02));-#7448 = VECTOR('',#7449,1.);-#7449 = DIRECTION('',(0.379424173637,-0.92522283611));-#7450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7451 = ORIENTED_EDGE('',*,*,#7452,.T.);-#7452 = EDGE_CURVE('',#7437,#7453,#7455,.T.);-#7453 = VERTEX_POINT('',#7454);-#7454 = CARTESIAN_POINT('',(0.350022786458,3.572916666667E-02,0.9350001)- );-#7455 = SURFACE_CURVE('',#7456,(#7460),.PCURVE_S1.);-#7456 = LINE('',#7457,#7458);-#7457 = CARTESIAN_POINT('',(0.350022786458,-2.027994791667E-02,0.9350001- ));-#7458 = VECTOR('',#7459,1.);-#7459 = DIRECTION('',(0.,1.,0.));-#7460 = PCURVE('',#7408,#7461);-#7461 = DEFINITIONAL_REPRESENTATION('',(#7462),#7466);-#7462 = LINE('',#7463,#7464);-#7463 = CARTESIAN_POINT('',(4.0970052083E-02,1.203125E-02));-#7464 = VECTOR('',#7465,1.);-#7465 = DIRECTION('',(0.,1.));-#7466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7467 = ORIENTED_EDGE('',*,*,#7468,.T.);-#7468 = EDGE_CURVE('',#7453,#7469,#7471,.T.);-#7469 = VERTEX_POINT('',#7470);-#7470 = CARTESIAN_POINT('',(0.358909505208,3.572916666667E-02,0.9350001)- );-#7471 = SURFACE_CURVE('',#7472,(#7476),.PCURVE_S1.);-#7472 = LINE('',#7473,#7474);-#7473 = CARTESIAN_POINT('',(0.350022786458,3.572916666667E-02,0.9350001)- );-#7474 = VECTOR('',#7475,1.);-#7475 = DIRECTION('',(1.,0.,0.));-#7476 = PCURVE('',#7408,#7477);-#7477 = DEFINITIONAL_REPRESENTATION('',(#7478),#7482);-#7478 = LINE('',#7479,#7480);-#7479 = CARTESIAN_POINT('',(4.0970052083E-02,6.804036458334E-02));-#7480 = VECTOR('',#7481,1.);-#7481 = DIRECTION('',(1.,0.));-#7482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7483 = ORIENTED_EDGE('',*,*,#7484,.T.);-#7484 = EDGE_CURVE('',#7469,#7485,#7487,.T.);-#7485 = VERTEX_POINT('',#7486);-#7486 = CARTESIAN_POINT('',(0.358909505208,-3.231119791667E-02,0.9350001- ));-#7487 = SURFACE_CURVE('',#7488,(#7492),.PCURVE_S1.);-#7488 = LINE('',#7489,#7490);-#7489 = CARTESIAN_POINT('',(0.358909505208,3.572916666667E-02,0.9350001)- );-#7490 = VECTOR('',#7491,1.);-#7491 = DIRECTION('',(0.,-1.,0.));-#7492 = PCURVE('',#7408,#7493);-#7493 = DEFINITIONAL_REPRESENTATION('',(#7494),#7498);-#7494 = LINE('',#7495,#7496);-#7495 = CARTESIAN_POINT('',(4.9856770833E-02,6.804036458334E-02));-#7496 = VECTOR('',#7497,1.);-#7497 = DIRECTION('',(0.,-1.));-#7498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7499 = ORIENTED_EDGE('',*,*,#7500,.T.);-#7500 = EDGE_CURVE('',#7485,#7501,#7503,.T.);-#7501 = VERTEX_POINT('',#7502);-#7502 = CARTESIAN_POINT('',(0.347242838542,-3.231119791667E-02,0.9350001- ));-#7503 = SURFACE_CURVE('',#7504,(#7508),.PCURVE_S1.);-#7504 = LINE('',#7505,#7506);-#7505 = CARTESIAN_POINT('',(0.358909505208,-3.231119791667E-02,0.9350001- ));-#7506 = VECTOR('',#7507,1.);-#7507 = DIRECTION('',(-1.,0.,0.));-#7508 = PCURVE('',#7408,#7509);-#7509 = DEFINITIONAL_REPRESENTATION('',(#7510),#7514);-#7510 = LINE('',#7511,#7512);-#7511 = CARTESIAN_POINT('',(4.9856770833E-02,0.));-#7512 = VECTOR('',#7513,1.);-#7513 = DIRECTION('',(-1.,0.));-#7514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7515 = ORIENTED_EDGE('',*,*,#7516,.T.);-#7516 = EDGE_CURVE('',#7501,#7517,#7519,.T.);-#7517 = VERTEX_POINT('',#7518);-#7518 = CARTESIAN_POINT('',(0.324274088542,2.369791666667E-02,0.9350001)- );-#7519 = SURFACE_CURVE('',#7520,(#7524),.PCURVE_S1.);-#7520 = LINE('',#7521,#7522);-#7521 = CARTESIAN_POINT('',(0.347242838542,-3.231119791667E-02,0.9350001- ));-#7522 = VECTOR('',#7523,1.);-#7523 = DIRECTION('',(-0.379424173637,0.92522283611,0.));-#7524 = PCURVE('',#7408,#7525);-#7525 = DEFINITIONAL_REPRESENTATION('',(#7526),#7530);-#7526 = LINE('',#7527,#7528);-#7527 = CARTESIAN_POINT('',(3.8190104167E-02,0.));-#7528 = VECTOR('',#7529,1.);-#7529 = DIRECTION('',(-0.379424173637,0.92522283611));-#7530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7531 = ORIENTED_EDGE('',*,*,#7532,.T.);-#7532 = EDGE_CURVE('',#7517,#7533,#7535,.T.);-#7533 = VERTEX_POINT('',#7534);-#7534 = CARTESIAN_POINT('',(0.324274088542,-3.231119791667E-02,0.9350001- ));-#7535 = SURFACE_CURVE('',#7536,(#7540),.PCURVE_S1.);-#7536 = LINE('',#7537,#7538);-#7537 = CARTESIAN_POINT('',(0.324274088542,2.369791666667E-02,0.9350001)- );-#7538 = VECTOR('',#7539,1.);-#7539 = DIRECTION('',(0.,-1.,0.));-#7540 = PCURVE('',#7408,#7541);-#7541 = DEFINITIONAL_REPRESENTATION('',(#7542),#7546);-#7542 = LINE('',#7543,#7544);-#7543 = CARTESIAN_POINT('',(1.5221354167E-02,5.600911458334E-02));-#7544 = VECTOR('',#7545,1.);-#7545 = DIRECTION('',(0.,-1.));-#7546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7547 = ORIENTED_EDGE('',*,*,#7548,.T.);-#7548 = EDGE_CURVE('',#7533,#7398,#7549,.T.);-#7549 = SURFACE_CURVE('',#7550,(#7554),.PCURVE_S1.);-#7550 = LINE('',#7551,#7552);-#7551 = CARTESIAN_POINT('',(0.324274088542,-3.231119791667E-02,0.9350001- ));-#7552 = VECTOR('',#7553,1.);-#7553 = DIRECTION('',(-1.,0.,0.));-#7554 = PCURVE('',#7408,#7555);-#7555 = DEFINITIONAL_REPRESENTATION('',(#7556),#7560);-#7556 = LINE('',#7557,#7558);-#7557 = CARTESIAN_POINT('',(1.5221354167E-02,0.));-#7558 = VECTOR('',#7559,1.);-#7559 = DIRECTION('',(-1.,0.));-#7560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7561 = SHELL_BASED_SURFACE_MODEL('',(#7562));-#7562 = OPEN_SHELL('',(#7563));-#7563 = ADVANCED_FACE('',(#7564),#7578,.T.);-#7564 = FACE_BOUND('',#7565,.F.);-#7565 = EDGE_LOOP('',(#7566,#7589,#7605,#7621,#7637,#7653,#7669,#7685,- #7701,#7717,#7733,#7749));-#7566 = ORIENTED_EDGE('',*,*,#7567,.T.);-#7567 = EDGE_CURVE('',#7568,#7570,#7572,.T.);-#7568 = VERTEX_POINT('',#7569);-#7569 = CARTESIAN_POINT('',(0.374222005208,-3.231119791667E-02,0.9350001- ));-#7570 = VERTEX_POINT('',#7571);-#7571 = CARTESIAN_POINT('',(0.374222005208,3.572916666667E-02,0.9350001)- );-#7572 = SURFACE_CURVE('',#7573,(#7577),.PCURVE_S1.);-#7573 = LINE('',#7574,#7575);-#7574 = CARTESIAN_POINT('',(0.374222005208,-3.231119791667E-02,0.9350001- ));-#7575 = VECTOR('',#7576,1.);-#7576 = DIRECTION('',(0.,1.,0.));-#7577 = PCURVE('',#7578,#7583);-#7578 = PLANE('',#7579);-#7579 = AXIS2_PLACEMENT_3D('',#7580,#7581,#7582);-#7580 = CARTESIAN_POINT('',(0.365244140625,-3.231119791667E-02,0.9350001- ));-#7581 = DIRECTION('',(0.,0.,1.));-#7582 = DIRECTION('',(1.,0.,-0.));-#7583 = DEFINITIONAL_REPRESENTATION('',(#7584),#7588);-#7584 = LINE('',#7585,#7586);-#7585 = CARTESIAN_POINT('',(8.977864583E-03,0.));-#7586 = VECTOR('',#7587,1.);-#7587 = DIRECTION('',(0.,1.));-#7588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7589 = ORIENTED_EDGE('',*,*,#7590,.T.);-#7590 = EDGE_CURVE('',#7570,#7591,#7593,.T.);-#7591 = VERTEX_POINT('',#7592);-#7592 = CARTESIAN_POINT('',(0.414599609375,3.572916666667E-02,0.9350001)- );-#7593 = SURFACE_CURVE('',#7594,(#7598),.PCURVE_S1.);-#7594 = LINE('',#7595,#7596);-#7595 = CARTESIAN_POINT('',(0.374222005208,3.572916666667E-02,0.9350001)- );-#7596 = VECTOR('',#7597,1.);-#7597 = DIRECTION('',(1.,0.,0.));-#7598 = PCURVE('',#7578,#7599);-#7599 = DEFINITIONAL_REPRESENTATION('',(#7600),#7604);-#7600 = LINE('',#7601,#7602);-#7601 = CARTESIAN_POINT('',(8.977864583E-03,6.804036458334E-02));-#7602 = VECTOR('',#7603,1.);-#7603 = DIRECTION('',(1.,0.));-#7604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7605 = ORIENTED_EDGE('',*,*,#7606,.T.);-#7606 = EDGE_CURVE('',#7591,#7607,#7609,.T.);-#7607 = VERTEX_POINT('',#7608);-#7608 = CARTESIAN_POINT('',(0.414599609375,2.798177083333E-02,0.9350001)- );-#7609 = SURFACE_CURVE('',#7610,(#7614),.PCURVE_S1.);-#7610 = LINE('',#7611,#7612);-#7611 = CARTESIAN_POINT('',(0.414599609375,3.572916666667E-02,0.9350001)- );-#7612 = VECTOR('',#7613,1.);-#7613 = DIRECTION('',(0.,-1.,0.));-#7614 = PCURVE('',#7578,#7615);-#7615 = DEFINITIONAL_REPRESENTATION('',(#7616),#7620);-#7616 = LINE('',#7617,#7618);-#7617 = CARTESIAN_POINT('',(4.935546875E-02,6.804036458334E-02));-#7618 = VECTOR('',#7619,1.);-#7619 = DIRECTION('',(0.,-1.));-#7620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7621 = ORIENTED_EDGE('',*,*,#7622,.T.);-#7622 = EDGE_CURVE('',#7607,#7623,#7625,.T.);-#7623 = VERTEX_POINT('',#7624);-#7624 = CARTESIAN_POINT('',(0.383427734375,2.798177083333E-02,0.9350001)- );-#7625 = SURFACE_CURVE('',#7626,(#7630),.PCURVE_S1.);-#7626 = LINE('',#7627,#7628);-#7627 = CARTESIAN_POINT('',(0.414599609375,2.798177083333E-02,0.9350001)- );-#7628 = VECTOR('',#7629,1.);-#7629 = DIRECTION('',(-1.,0.,0.));-#7630 = PCURVE('',#7578,#7631);-#7631 = DEFINITIONAL_REPRESENTATION('',(#7632),#7636);-#7632 = LINE('',#7633,#7634);-#7633 = CARTESIAN_POINT('',(4.935546875E-02,6.029296875E-02));-#7634 = VECTOR('',#7635,1.);-#7635 = DIRECTION('',(-1.,0.));-#7636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7637 = ORIENTED_EDGE('',*,*,#7638,.T.);-#7638 = EDGE_CURVE('',#7623,#7639,#7641,.T.);-#7639 = VERTEX_POINT('',#7640);-#7640 = CARTESIAN_POINT('',(0.383427734375,7.838541666667E-03,0.9350001)- );-#7641 = SURFACE_CURVE('',#7642,(#7646),.PCURVE_S1.);-#7642 = LINE('',#7643,#7644);-#7643 = CARTESIAN_POINT('',(0.383427734375,2.798177083333E-02,0.9350001)- );-#7644 = VECTOR('',#7645,1.);-#7645 = DIRECTION('',(0.,-1.,0.));-#7646 = PCURVE('',#7578,#7647);-#7647 = DEFINITIONAL_REPRESENTATION('',(#7648),#7652);-#7648 = LINE('',#7649,#7650);-#7649 = CARTESIAN_POINT('',(1.818359375E-02,6.029296875E-02));-#7650 = VECTOR('',#7651,1.);-#7651 = DIRECTION('',(0.,-1.));-#7652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7653 = ORIENTED_EDGE('',*,*,#7654,.T.);-#7654 = EDGE_CURVE('',#7639,#7655,#7657,.T.);-#7655 = VERTEX_POINT('',#7656);-#7656 = CARTESIAN_POINT('',(0.413232421875,7.838541666667E-03,0.9350001)- );-#7657 = SURFACE_CURVE('',#7658,(#7662),.PCURVE_S1.);-#7658 = LINE('',#7659,#7660);-#7659 = CARTESIAN_POINT('',(0.383427734375,7.838541666667E-03,0.9350001)- );-#7660 = VECTOR('',#7661,1.);-#7661 = DIRECTION('',(1.,0.,0.));-#7662 = PCURVE('',#7578,#7663);-#7663 = DEFINITIONAL_REPRESENTATION('',(#7664),#7668);-#7664 = LINE('',#7665,#7666);-#7665 = CARTESIAN_POINT('',(1.818359375E-02,4.014973958334E-02));-#7666 = VECTOR('',#7667,1.);-#7667 = DIRECTION('',(1.,0.));-#7668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7669 = ORIENTED_EDGE('',*,*,#7670,.T.);-#7670 = EDGE_CURVE('',#7655,#7671,#7673,.T.);-#7671 = VERTEX_POINT('',#7672);-#7672 = CARTESIAN_POINT('',(0.413232421875,9.114583333333E-05,0.9350001)- );-#7673 = SURFACE_CURVE('',#7674,(#7678),.PCURVE_S1.);-#7674 = LINE('',#7675,#7676);-#7675 = CARTESIAN_POINT('',(0.413232421875,7.838541666667E-03,0.9350001)- );-#7676 = VECTOR('',#7677,1.);-#7677 = DIRECTION('',(0.,-1.,0.));-#7678 = PCURVE('',#7578,#7679);-#7679 = DEFINITIONAL_REPRESENTATION('',(#7680),#7684);-#7680 = LINE('',#7681,#7682);-#7681 = CARTESIAN_POINT('',(4.798828125E-02,4.014973958334E-02));-#7682 = VECTOR('',#7683,1.);-#7683 = DIRECTION('',(0.,-1.));-#7684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7685 = ORIENTED_EDGE('',*,*,#7686,.T.);-#7686 = EDGE_CURVE('',#7671,#7687,#7689,.T.);-#7687 = VERTEX_POINT('',#7688);-#7688 = CARTESIAN_POINT('',(0.383427734375,9.114583333333E-05,0.9350001)- );-#7689 = SURFACE_CURVE('',#7690,(#7694),.PCURVE_S1.);-#7690 = LINE('',#7691,#7692);-#7691 = CARTESIAN_POINT('',(0.413232421875,9.114583333333E-05,0.9350001)- );-#7692 = VECTOR('',#7693,1.);-#7693 = DIRECTION('',(-1.,0.,0.));-#7694 = PCURVE('',#7578,#7695);-#7695 = DEFINITIONAL_REPRESENTATION('',(#7696),#7700);-#7696 = LINE('',#7697,#7698);-#7697 = CARTESIAN_POINT('',(4.798828125E-02,3.240234375E-02));-#7698 = VECTOR('',#7699,1.);-#7699 = DIRECTION('',(-1.,0.));-#7700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7701 = ORIENTED_EDGE('',*,*,#7702,.T.);-#7702 = EDGE_CURVE('',#7687,#7703,#7705,.T.);-#7703 = VERTEX_POINT('',#7704);-#7704 = CARTESIAN_POINT('',(0.383427734375,-2.456380208333E-02,0.9350001- ));-#7705 = SURFACE_CURVE('',#7706,(#7710),.PCURVE_S1.);-#7706 = LINE('',#7707,#7708);-#7707 = CARTESIAN_POINT('',(0.383427734375,9.114583333333E-05,0.9350001)- );-#7708 = VECTOR('',#7709,1.);-#7709 = DIRECTION('',(0.,-1.,0.));-#7710 = PCURVE('',#7578,#7711);-#7711 = DEFINITIONAL_REPRESENTATION('',(#7712),#7716);-#7712 = LINE('',#7713,#7714);-#7713 = CARTESIAN_POINT('',(1.818359375E-02,3.240234375E-02));-#7714 = VECTOR('',#7715,1.);-#7715 = DIRECTION('',(0.,-1.));-#7716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7717 = ORIENTED_EDGE('',*,*,#7718,.T.);-#7718 = EDGE_CURVE('',#7703,#7719,#7721,.T.);-#7719 = VERTEX_POINT('',#7720);-#7720 = CARTESIAN_POINT('',(0.415465494792,-2.456380208333E-02,0.9350001- ));-#7721 = SURFACE_CURVE('',#7722,(#7726),.PCURVE_S1.);-#7722 = LINE('',#7723,#7724);-#7723 = CARTESIAN_POINT('',(0.383427734375,-2.456380208333E-02,0.9350001- ));-#7724 = VECTOR('',#7725,1.);-#7725 = DIRECTION('',(1.,0.,0.));-#7726 = PCURVE('',#7578,#7727);-#7727 = DEFINITIONAL_REPRESENTATION('',(#7728),#7732);-#7728 = LINE('',#7729,#7730);-#7729 = CARTESIAN_POINT('',(1.818359375E-02,7.74739583334E-03));-#7730 = VECTOR('',#7731,1.);-#7731 = DIRECTION('',(1.,0.));-#7732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7733 = ORIENTED_EDGE('',*,*,#7734,.T.);-#7734 = EDGE_CURVE('',#7719,#7735,#7737,.T.);-#7735 = VERTEX_POINT('',#7736);-#7736 = CARTESIAN_POINT('',(0.415465494792,-3.231119791667E-02,0.9350001- ));-#7737 = SURFACE_CURVE('',#7738,(#7742),.PCURVE_S1.);-#7738 = LINE('',#7739,#7740);-#7739 = CARTESIAN_POINT('',(0.415465494792,-2.456380208333E-02,0.9350001- ));-#7740 = VECTOR('',#7741,1.);-#7741 = DIRECTION('',(0.,-1.,0.));-#7742 = PCURVE('',#7578,#7743);-#7743 = DEFINITIONAL_REPRESENTATION('',(#7744),#7748);-#7744 = LINE('',#7745,#7746);-#7745 = CARTESIAN_POINT('',(5.0221354167E-02,7.74739583334E-03));-#7746 = VECTOR('',#7747,1.);-#7747 = DIRECTION('',(0.,-1.));-#7748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7749 = ORIENTED_EDGE('',*,*,#7750,.T.);-#7750 = EDGE_CURVE('',#7735,#7568,#7751,.T.);-#7751 = SURFACE_CURVE('',#7752,(#7756),.PCURVE_S1.);-#7752 = LINE('',#7753,#7754);-#7753 = CARTESIAN_POINT('',(0.415465494792,-3.231119791667E-02,0.9350001- ));-#7754 = VECTOR('',#7755,1.);-#7755 = DIRECTION('',(-1.,0.,0.));-#7756 = PCURVE('',#7578,#7757);-#7757 = DEFINITIONAL_REPRESENTATION('',(#7758),#7762);-#7758 = LINE('',#7759,#7760);-#7759 = CARTESIAN_POINT('',(5.0221354167E-02,0.));-#7760 = VECTOR('',#7761,1.);-#7761 = DIRECTION('',(-1.,0.));-#7762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) -GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#7767)) -GLOBAL_UNIT_ASSIGNED_CONTEXT((#7764,#7765,#7766)) REPRESENTATION_CONTEXT+#7221 = ORIENTED_EDGE('',*,*,#7222,.T.);+#7222 = EDGE_CURVE('',#7207,#7223,#7225,.T.);+#7223 = VERTEX_POINT('',#7224);+#7224 = CARTESIAN_POINT('',(0.413232463198,0.625090920842,0.59710515));+#7225 = SURFACE_CURVE('',#7226,(#7230),.PCURVE_S1.);+#7226 = LINE('',#7227,#7228);+#7227 = CARTESIAN_POINT('',(0.413232463198,0.632838317451,0.59710515));+#7228 = VECTOR('',#7229,1.);+#7229 = DIRECTION('',(0.,-1.,0.));+#7230 = PCURVE('',#7130,#7231);+#7231 = DEFINITIONAL_REPRESENTATION('',(#7232),#7236);+#7232 = LINE('',#7233,#7234);+#7233 = CARTESIAN_POINT('',(4.7988286049E-02,4.0149743599E-02));+#7234 = VECTOR('',#7235,1.);+#7235 = DIRECTION('',(0.,-1.));+#7236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7237 = ORIENTED_EDGE('',*,*,#7238,.T.);+#7238 = EDGE_CURVE('',#7223,#7239,#7241,.T.);+#7239 = VERTEX_POINT('',#7240);+#7240 = CARTESIAN_POINT('',(0.383427772718,0.625090920842,0.59710515));+#7241 = SURFACE_CURVE('',#7242,(#7246),.PCURVE_S1.);+#7242 = LINE('',#7243,#7244);+#7243 = CARTESIAN_POINT('',(0.413232463198,0.625090920842,0.59710515));+#7244 = VECTOR('',#7245,1.);+#7245 = DIRECTION('',(-1.,0.,0.));+#7246 = PCURVE('',#7130,#7247);+#7247 = DEFINITIONAL_REPRESENTATION('',(#7248),#7252);+#7248 = LINE('',#7249,#7250);+#7249 = CARTESIAN_POINT('',(4.7988286049E-02,3.240234699E-02));+#7250 = VECTOR('',#7251,1.);+#7251 = DIRECTION('',(-1.,0.));+#7252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7253 = ORIENTED_EDGE('',*,*,#7254,.T.);+#7254 = EDGE_CURVE('',#7239,#7255,#7257,.T.);+#7255 = VERTEX_POINT('',#7256);+#7256 = CARTESIAN_POINT('',(0.383427772718,0.60043597046,0.59710515));+#7257 = SURFACE_CURVE('',#7258,(#7262),.PCURVE_S1.);+#7258 = LINE('',#7259,#7260);+#7259 = CARTESIAN_POINT('',(0.383427772718,0.625090920842,0.59710515));+#7260 = VECTOR('',#7261,1.);+#7261 = DIRECTION('',(0.,-1.,0.));+#7262 = PCURVE('',#7130,#7263);+#7263 = DEFINITIONAL_REPRESENTATION('',(#7264),#7268);+#7264 = LINE('',#7265,#7266);+#7265 = CARTESIAN_POINT('',(1.8183595569E-02,3.240234699E-02));+#7266 = VECTOR('',#7267,1.);+#7267 = DIRECTION('',(0.,-1.));+#7268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7269 = ORIENTED_EDGE('',*,*,#7270,.T.);+#7270 = EDGE_CURVE('',#7255,#7271,#7273,.T.);+#7271 = VERTEX_POINT('',#7272);+#7272 = CARTESIAN_POINT('',(0.415465536338,0.60043597046,0.59710515));+#7273 = SURFACE_CURVE('',#7274,(#7278),.PCURVE_S1.);+#7274 = LINE('',#7275,#7276);+#7275 = CARTESIAN_POINT('',(0.383427772718,0.60043597046,0.59710515));+#7276 = VECTOR('',#7277,1.);+#7277 = DIRECTION('',(1.,0.,0.));+#7278 = PCURVE('',#7130,#7279);+#7279 = DEFINITIONAL_REPRESENTATION('',(#7280),#7284);+#7280 = LINE('',#7281,#7282);+#7281 = CARTESIAN_POINT('',(1.8183595569E-02,7.747396608E-03));+#7282 = VECTOR('',#7283,1.);+#7283 = DIRECTION('',(1.,0.));+#7284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7285 = ORIENTED_EDGE('',*,*,#7286,.T.);+#7286 = EDGE_CURVE('',#7271,#7287,#7289,.T.);+#7287 = VERTEX_POINT('',#7288);+#7288 = CARTESIAN_POINT('',(0.415465536338,0.592688573852,0.59710515));+#7289 = SURFACE_CURVE('',#7290,(#7294),.PCURVE_S1.);+#7290 = LINE('',#7291,#7292);+#7291 = CARTESIAN_POINT('',(0.415465536338,0.60043597046,0.59710515));+#7292 = VECTOR('',#7293,1.);+#7293 = DIRECTION('',(0.,-1.,0.));+#7294 = PCURVE('',#7130,#7295);+#7295 = DEFINITIONAL_REPRESENTATION('',(#7296),#7300);+#7296 = LINE('',#7297,#7298);+#7297 = CARTESIAN_POINT('',(5.0221359189E-02,7.747396608E-03));+#7298 = VECTOR('',#7299,1.);+#7299 = DIRECTION('',(0.,-1.));+#7300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7301 = ORIENTED_EDGE('',*,*,#7302,.T.);+#7302 = EDGE_CURVE('',#7287,#7120,#7303,.T.);+#7303 = SURFACE_CURVE('',#7304,(#7308),.PCURVE_S1.);+#7304 = LINE('',#7305,#7306);+#7305 = CARTESIAN_POINT('',(0.415465536338,0.592688573852,0.59710515));+#7306 = VECTOR('',#7307,1.);+#7307 = DIRECTION('',(-1.,0.,0.));+#7308 = PCURVE('',#7130,#7309);+#7309 = DEFINITIONAL_REPRESENTATION('',(#7310),#7314);+#7310 = LINE('',#7311,#7312);+#7311 = CARTESIAN_POINT('',(5.0221359189E-02,0.));+#7312 = VECTOR('',#7313,1.);+#7313 = DIRECTION('',(-1.,0.));+#7314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#7319)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#7316,#7317,#7318)) REPRESENTATION_CONTEXT ('Context #1','3D Context with UNIT and UNCERTAINTY') );-#7764 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );-#7765 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );-#7766 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );-#7767 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#7764,+#7316 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#7317 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#7318 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#7319 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#7316, 'distance_accuracy_value','confusion accuracy');-#7768 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#7769,#7771);-#7769 = ( REPRESENTATION_RELATIONSHIP('','',#3988,#10) -REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#7770) +#7320 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#7321,#7323);+#7321 = ( REPRESENTATION_RELATIONSHIP('','',#3540,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#7322) SHAPE_REPRESENTATION_RELATIONSHIP() );-#7770 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19);-#7771 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',- #7772);-#7772 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('3','=>[0:1:1:3]','',#5,#3983,$);-#7773 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#3985));-#7774 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(- #7775,#7783,#7790,#7797,#7804,#7811,#7818,#7825,#7832,#7839,#7846,- #7853,#7860,#7867,#7874,#7881,#7888,#7895,#7902,#7909,#7916,#7923,- #7930,#7937,#7944,#7951,#7958,#7965,#7972),#3970);-#7775 = STYLED_ITEM('color',(#7776),#60);-#7776 = PRESENTATION_STYLE_ASSIGNMENT((#7777));-#7777 = SURFACE_STYLE_USAGE(.BOTH.,#7778);-#7778 = SURFACE_SIDE_STYLE('',(#7779));-#7779 = SURFACE_STYLE_FILL_AREA(#7780);-#7780 = FILL_AREA_STYLE('',(#7781));-#7781 = FILL_AREA_STYLE_COLOUR('',#7782);-#7782 = COLOUR_RGB('',0.796078417252,0.823529417451,0.937254901616);-#7783 = STYLED_ITEM('color',(#7784),#1690);-#7784 = PRESENTATION_STYLE_ASSIGNMENT((#7785));-#7785 = SURFACE_STYLE_USAGE(.BOTH.,#7786);-#7786 = SURFACE_SIDE_STYLE('',(#7787));-#7787 = SURFACE_STYLE_FILL_AREA(#7788);-#7788 = FILL_AREA_STYLE('',(#7789));-#7789 = FILL_AREA_STYLE_COLOUR('',#7782);-#7790 = OVER_RIDING_STYLED_ITEM('overriding color',(#7791),#1692,#7783);-#7791 = PRESENTATION_STYLE_ASSIGNMENT((#7792));-#7792 = SURFACE_STYLE_USAGE(.BOTH.,#7793);-#7793 = SURFACE_SIDE_STYLE('',(#7794));-#7794 = SURFACE_STYLE_FILL_AREA(#7795);-#7795 = FILL_AREA_STYLE('',(#7796));-#7796 = FILL_AREA_STYLE_COLOUR('',#7782);-#7797 = OVER_RIDING_STYLED_ITEM('overriding color',(#7798),#1812,#7783);-#7798 = PRESENTATION_STYLE_ASSIGNMENT((#7799));-#7799 = SURFACE_STYLE_USAGE(.BOTH.,#7800);-#7800 = SURFACE_SIDE_STYLE('',(#7801));-#7801 = SURFACE_STYLE_FILL_AREA(#7802);-#7802 = FILL_AREA_STYLE('',(#7803));-#7803 = FILL_AREA_STYLE_COLOUR('',#7782);-#7804 = OVER_RIDING_STYLED_ITEM('overriding color',(#7805),#1927,#7783);-#7805 = PRESENTATION_STYLE_ASSIGNMENT((#7806));+#7322 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19);+#7323 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+ #7324);+#7324 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('3','=>[0:1:1:3]','',#5,#3535,$);+#7325 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#3537));+#7326 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+ #7327,#7337,#7344,#7353,#7360,#7369,#7376,#7385,#7392,#7401,#7408,+ #7417,#7424,#7433,#7440,#7449,#7456,#7465,#7472,#7481,#7488,#7497,+ #7504,#7513,#7520,#7529,#7536,#7545,#7552,#7561),#7315);+#7327 = STYLED_ITEM('color',(#7328),#3541);+#7328 = PRESENTATION_STYLE_ASSIGNMENT((#7329,#7335));+#7329 = SURFACE_STYLE_USAGE(.BOTH.,#7330);+#7330 = SURFACE_SIDE_STYLE('',(#7331));+#7331 = SURFACE_STYLE_FILL_AREA(#7332);+#7332 = FILL_AREA_STYLE('',(#7333));+#7333 = FILL_AREA_STYLE_COLOUR('',#7334);+#7334 = COLOUR_RGB('',0.896243869286,0.896243869286,0.886003966688);+#7335 = CURVE_STYLE('',#7336,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7336 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7337 = OVER_RIDING_STYLED_ITEM('overriding color',(#7338),#3543,#7327);+#7338 = PRESENTATION_STYLE_ASSIGNMENT((#7339));+#7339 = SURFACE_STYLE_USAGE(.BOTH.,#7340);+#7340 = SURFACE_SIDE_STYLE('',(#7341));+#7341 = SURFACE_STYLE_FILL_AREA(#7342);+#7342 = FILL_AREA_STYLE('',(#7343));+#7343 = FILL_AREA_STYLE_COLOUR('',#7334);+#7344 = STYLED_ITEM('color',(#7345),#3839);+#7345 = PRESENTATION_STYLE_ASSIGNMENT((#7346,#7351));+#7346 = SURFACE_STYLE_USAGE(.BOTH.,#7347);+#7347 = SURFACE_SIDE_STYLE('',(#7348));+#7348 = SURFACE_STYLE_FILL_AREA(#7349);+#7349 = FILL_AREA_STYLE('',(#7350));+#7350 = FILL_AREA_STYLE_COLOUR('',#7334);+#7351 = CURVE_STYLE('',#7352,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7352 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7353 = OVER_RIDING_STYLED_ITEM('overriding color',(#7354),#3841,#7344);+#7354 = PRESENTATION_STYLE_ASSIGNMENT((#7355));+#7355 = SURFACE_STYLE_USAGE(.BOTH.,#7356);+#7356 = SURFACE_SIDE_STYLE('',(#7357));+#7357 = SURFACE_STYLE_FILL_AREA(#7358);+#7358 = FILL_AREA_STYLE('',(#7359));+#7359 = FILL_AREA_STYLE_COLOUR('',#7334);+#7360 = STYLED_ITEM('color',(#7361),#3945);+#7361 = PRESENTATION_STYLE_ASSIGNMENT((#7362,#7367));+#7362 = SURFACE_STYLE_USAGE(.BOTH.,#7363);+#7363 = SURFACE_SIDE_STYLE('',(#7364));+#7364 = SURFACE_STYLE_FILL_AREA(#7365);+#7365 = FILL_AREA_STYLE('',(#7366));+#7366 = FILL_AREA_STYLE_COLOUR('',#7334);+#7367 = CURVE_STYLE('',#7368,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7368 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7369 = OVER_RIDING_STYLED_ITEM('overriding color',(#7370),#3947,#7360);+#7370 = PRESENTATION_STYLE_ASSIGNMENT((#7371));+#7371 = SURFACE_STYLE_USAGE(.BOTH.,#7372);+#7372 = SURFACE_SIDE_STYLE('',(#7373));+#7373 = SURFACE_STYLE_FILL_AREA(#7374);+#7374 = FILL_AREA_STYLE('',(#7375));+#7375 = FILL_AREA_STYLE_COLOUR('',#7334);+#7376 = STYLED_ITEM('color',(#7377),#4291);+#7377 = PRESENTATION_STYLE_ASSIGNMENT((#7378,#7383));+#7378 = SURFACE_STYLE_USAGE(.BOTH.,#7379);+#7379 = SURFACE_SIDE_STYLE('',(#7380));+#7380 = SURFACE_STYLE_FILL_AREA(#7381);+#7381 = FILL_AREA_STYLE('',(#7382));+#7382 = FILL_AREA_STYLE_COLOUR('',#7334);+#7383 = CURVE_STYLE('',#7384,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7384 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7385 = OVER_RIDING_STYLED_ITEM('overriding color',(#7386),#4293,#7376);+#7386 = PRESENTATION_STYLE_ASSIGNMENT((#7387));+#7387 = SURFACE_STYLE_USAGE(.BOTH.,#7388);+#7388 = SURFACE_SIDE_STYLE('',(#7389));+#7389 = SURFACE_STYLE_FILL_AREA(#7390);+#7390 = FILL_AREA_STYLE('',(#7391));+#7391 = FILL_AREA_STYLE_COLOUR('',#7334);+#7392 = STYLED_ITEM('color',(#7393),#4477);+#7393 = PRESENTATION_STYLE_ASSIGNMENT((#7394,#7399));+#7394 = SURFACE_STYLE_USAGE(.BOTH.,#7395);+#7395 = SURFACE_SIDE_STYLE('',(#7396));+#7396 = SURFACE_STYLE_FILL_AREA(#7397);+#7397 = FILL_AREA_STYLE('',(#7398));+#7398 = FILL_AREA_STYLE_COLOUR('',#7334);+#7399 = CURVE_STYLE('',#7400,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7400 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7401 = OVER_RIDING_STYLED_ITEM('overriding color',(#7402),#4479,#7392);+#7402 = PRESENTATION_STYLE_ASSIGNMENT((#7403));+#7403 = SURFACE_STYLE_USAGE(.BOTH.,#7404);+#7404 = SURFACE_SIDE_STYLE('',(#7405));+#7405 = SURFACE_STYLE_FILL_AREA(#7406);+#7406 = FILL_AREA_STYLE('',(#7407));+#7407 = FILL_AREA_STYLE_COLOUR('',#7334);+#7408 = STYLED_ITEM('color',(#7409),#4665);+#7409 = PRESENTATION_STYLE_ASSIGNMENT((#7410,#7415));+#7410 = SURFACE_STYLE_USAGE(.BOTH.,#7411);+#7411 = SURFACE_SIDE_STYLE('',(#7412));+#7412 = SURFACE_STYLE_FILL_AREA(#7413);+#7413 = FILL_AREA_STYLE('',(#7414));+#7414 = FILL_AREA_STYLE_COLOUR('',#7334);+#7415 = CURVE_STYLE('',#7416,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7416 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7417 = OVER_RIDING_STYLED_ITEM('overriding color',(#7418),#4667,#7408);+#7418 = PRESENTATION_STYLE_ASSIGNMENT((#7419));+#7419 = SURFACE_STYLE_USAGE(.BOTH.,#7420);+#7420 = SURFACE_SIDE_STYLE('',(#7421));+#7421 = SURFACE_STYLE_FILL_AREA(#7422);+#7422 = FILL_AREA_STYLE('',(#7423));+#7423 = FILL_AREA_STYLE_COLOUR('',#7334);+#7424 = STYLED_ITEM('color',(#7425),#5011);+#7425 = PRESENTATION_STYLE_ASSIGNMENT((#7426,#7431));+#7426 = SURFACE_STYLE_USAGE(.BOTH.,#7427);+#7427 = SURFACE_SIDE_STYLE('',(#7428));+#7428 = SURFACE_STYLE_FILL_AREA(#7429);+#7429 = FILL_AREA_STYLE('',(#7430));+#7430 = FILL_AREA_STYLE_COLOUR('',#7334);+#7431 = CURVE_STYLE('',#7432,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7432 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7433 = OVER_RIDING_STYLED_ITEM('overriding color',(#7434),#5013,#7424);+#7434 = PRESENTATION_STYLE_ASSIGNMENT((#7435));+#7435 = SURFACE_STYLE_USAGE(.BOTH.,#7436);+#7436 = SURFACE_SIDE_STYLE('',(#7437));+#7437 = SURFACE_STYLE_FILL_AREA(#7438);+#7438 = FILL_AREA_STYLE('',(#7439));+#7439 = FILL_AREA_STYLE_COLOUR('',#7334);+#7440 = STYLED_ITEM('color',(#7441),#5357);+#7441 = PRESENTATION_STYLE_ASSIGNMENT((#7442,#7447));+#7442 = SURFACE_STYLE_USAGE(.BOTH.,#7443);+#7443 = SURFACE_SIDE_STYLE('',(#7444));+#7444 = SURFACE_STYLE_FILL_AREA(#7445);+#7445 = FILL_AREA_STYLE('',(#7446));+#7446 = FILL_AREA_STYLE_COLOUR('',#7334);+#7447 = CURVE_STYLE('',#7448,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7448 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7449 = OVER_RIDING_STYLED_ITEM('overriding color',(#7450),#5359,#7440);+#7450 = PRESENTATION_STYLE_ASSIGNMENT((#7451));+#7451 = SURFACE_STYLE_USAGE(.BOTH.,#7452);+#7452 = SURFACE_SIDE_STYLE('',(#7453));+#7453 = SURFACE_STYLE_FILL_AREA(#7454);+#7454 = FILL_AREA_STYLE('',(#7455));+#7455 = FILL_AREA_STYLE_COLOUR('',#7334);+#7456 = STYLED_ITEM('color',(#7457),#5769);+#7457 = PRESENTATION_STYLE_ASSIGNMENT((#7458,#7463));+#7458 = SURFACE_STYLE_USAGE(.BOTH.,#7459);+#7459 = SURFACE_SIDE_STYLE('',(#7460));+#7460 = SURFACE_STYLE_FILL_AREA(#7461);+#7461 = FILL_AREA_STYLE('',(#7462));+#7462 = FILL_AREA_STYLE_COLOUR('',#7334);+#7463 = CURVE_STYLE('',#7464,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7464 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7465 = OVER_RIDING_STYLED_ITEM('overriding color',(#7466),#5771,#7456);+#7466 = PRESENTATION_STYLE_ASSIGNMENT((#7467));+#7467 = SURFACE_STYLE_USAGE(.BOTH.,#7468);+#7468 = SURFACE_SIDE_STYLE('',(#7469));+#7469 = SURFACE_STYLE_FILL_AREA(#7470);+#7470 = FILL_AREA_STYLE('',(#7471));+#7471 = FILL_AREA_STYLE_COLOUR('',#7334);+#7472 = STYLED_ITEM('color',(#7473),#5987);+#7473 = PRESENTATION_STYLE_ASSIGNMENT((#7474,#7479));+#7474 = SURFACE_STYLE_USAGE(.BOTH.,#7475);+#7475 = SURFACE_SIDE_STYLE('',(#7476));+#7476 = SURFACE_STYLE_FILL_AREA(#7477);+#7477 = FILL_AREA_STYLE('',(#7478));+#7478 = FILL_AREA_STYLE_COLOUR('',#7334);+#7479 = CURVE_STYLE('',#7480,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7480 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7481 = OVER_RIDING_STYLED_ITEM('overriding color',(#7482),#5989,#7472);+#7482 = PRESENTATION_STYLE_ASSIGNMENT((#7483));+#7483 = SURFACE_STYLE_USAGE(.BOTH.,#7484);+#7484 = SURFACE_SIDE_STYLE('',(#7485));+#7485 = SURFACE_STYLE_FILL_AREA(#7486);+#7486 = FILL_AREA_STYLE('',(#7487));+#7487 = FILL_AREA_STYLE_COLOUR('',#7334);+#7488 = STYLED_ITEM('color',(#7489),#6255);+#7489 = PRESENTATION_STYLE_ASSIGNMENT((#7490,#7495));+#7490 = SURFACE_STYLE_USAGE(.BOTH.,#7491);+#7491 = SURFACE_SIDE_STYLE('',(#7492));+#7492 = SURFACE_STYLE_FILL_AREA(#7493);+#7493 = FILL_AREA_STYLE('',(#7494));+#7494 = FILL_AREA_STYLE_COLOUR('',#7334);+#7495 = CURVE_STYLE('',#7496,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7496 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7497 = OVER_RIDING_STYLED_ITEM('overriding color',(#7498),#6257,#7488);+#7498 = PRESENTATION_STYLE_ASSIGNMENT((#7499));+#7499 = SURFACE_STYLE_USAGE(.BOTH.,#7500);+#7500 = SURFACE_SIDE_STYLE('',(#7501));+#7501 = SURFACE_STYLE_FILL_AREA(#7502);+#7502 = FILL_AREA_STYLE('',(#7503));+#7503 = FILL_AREA_STYLE_COLOUR('',#7334);+#7504 = STYLED_ITEM('color',(#7505),#6603);+#7505 = PRESENTATION_STYLE_ASSIGNMENT((#7506,#7511));+#7506 = SURFACE_STYLE_USAGE(.BOTH.,#7507);+#7507 = SURFACE_SIDE_STYLE('',(#7508));+#7508 = SURFACE_STYLE_FILL_AREA(#7509);+#7509 = FILL_AREA_STYLE('',(#7510));+#7510 = FILL_AREA_STYLE_COLOUR('',#7334);+#7511 = CURVE_STYLE('',#7512,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7512 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7513 = OVER_RIDING_STYLED_ITEM('overriding color',(#7514),#6605,#7504);+#7514 = PRESENTATION_STYLE_ASSIGNMENT((#7515));+#7515 = SURFACE_STYLE_USAGE(.BOTH.,#7516);+#7516 = SURFACE_SIDE_STYLE('',(#7517));+#7517 = SURFACE_STYLE_FILL_AREA(#7518);+#7518 = FILL_AREA_STYLE('',(#7519));+#7519 = FILL_AREA_STYLE_COLOUR('',#7334);+#7520 = STYLED_ITEM('color',(#7521),#6773);+#7521 = PRESENTATION_STYLE_ASSIGNMENT((#7522,#7527));+#7522 = SURFACE_STYLE_USAGE(.BOTH.,#7523);+#7523 = SURFACE_SIDE_STYLE('',(#7524));+#7524 = SURFACE_STYLE_FILL_AREA(#7525);+#7525 = FILL_AREA_STYLE('',(#7526));+#7526 = FILL_AREA_STYLE_COLOUR('',#7334);+#7527 = CURVE_STYLE('',#7528,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7528 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7529 = OVER_RIDING_STYLED_ITEM('overriding color',(#7530),#6775,#7520);+#7530 = PRESENTATION_STYLE_ASSIGNMENT((#7531));+#7531 = SURFACE_STYLE_USAGE(.BOTH.,#7532);+#7532 = SURFACE_SIDE_STYLE('',(#7533));+#7533 = SURFACE_STYLE_FILL_AREA(#7534);+#7534 = FILL_AREA_STYLE('',(#7535));+#7535 = FILL_AREA_STYLE_COLOUR('',#7334);+#7536 = STYLED_ITEM('color',(#7537),#6943);+#7537 = PRESENTATION_STYLE_ASSIGNMENT((#7538,#7543));+#7538 = SURFACE_STYLE_USAGE(.BOTH.,#7539);+#7539 = SURFACE_SIDE_STYLE('',(#7540));+#7540 = SURFACE_STYLE_FILL_AREA(#7541);+#7541 = FILL_AREA_STYLE('',(#7542));+#7542 = FILL_AREA_STYLE_COLOUR('',#7334);+#7543 = CURVE_STYLE('',#7544,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7544 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7545 = OVER_RIDING_STYLED_ITEM('overriding color',(#7546),#6945,#7536);+#7546 = PRESENTATION_STYLE_ASSIGNMENT((#7547));+#7547 = SURFACE_STYLE_USAGE(.BOTH.,#7548);+#7548 = SURFACE_SIDE_STYLE('',(#7549));+#7549 = SURFACE_STYLE_FILL_AREA(#7550);+#7550 = FILL_AREA_STYLE('',(#7551));+#7551 = FILL_AREA_STYLE_COLOUR('',#7334);+#7552 = STYLED_ITEM('color',(#7553),#7113);+#7553 = PRESENTATION_STYLE_ASSIGNMENT((#7554,#7559));+#7554 = SURFACE_STYLE_USAGE(.BOTH.,#7555);+#7555 = SURFACE_SIDE_STYLE('',(#7556));+#7556 = SURFACE_STYLE_FILL_AREA(#7557);+#7557 = FILL_AREA_STYLE('',(#7558));+#7558 = FILL_AREA_STYLE_COLOUR('',#7334);+#7559 = CURVE_STYLE('',#7560,POSITIVE_LENGTH_MEASURE(0.1),#7334);+#7560 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7561 = OVER_RIDING_STYLED_ITEM('overriding color',(#7562),#7115,#7552);+#7562 = PRESENTATION_STYLE_ASSIGNMENT((#7563));+#7563 = SURFACE_STYLE_USAGE(.BOTH.,#7564);+#7564 = SURFACE_SIDE_STYLE('',(#7565));+#7565 = SURFACE_STYLE_FILL_AREA(#7566);+#7566 = FILL_AREA_STYLE('',(#7567));+#7567 = FILL_AREA_STYLE_COLOUR('',#7334);+#7568 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+ #7569,#7579,#7588,#7597,#7606,#7615,#7624,#7633,#7642,#7651,#7660,+ #7669,#7678,#7687,#7696,#7705,#7714,#7723,#7732,#7741,#7750,#7759,+ #7768,#7777,#7786,#7795,#7804,#7813,#7822),#3522);+#7569 = STYLED_ITEM('color',(#7570),#60);+#7570 = PRESENTATION_STYLE_ASSIGNMENT((#7571,#7577));+#7571 = SURFACE_STYLE_USAGE(.BOTH.,#7572);+#7572 = SURFACE_SIDE_STYLE('',(#7573));+#7573 = SURFACE_STYLE_FILL_AREA(#7574);+#7574 = FILL_AREA_STYLE('',(#7575));+#7575 = FILL_AREA_STYLE_COLOUR('',#7576);+#7576 = COLOUR_RGB('',0.796078417252,0.823529417451,0.937254901616);+#7577 = CURVE_STYLE('',#7578,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7578 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7579 = STYLED_ITEM('color',(#7580),#1486);+#7580 = PRESENTATION_STYLE_ASSIGNMENT((#7581,#7586));+#7581 = SURFACE_STYLE_USAGE(.BOTH.,#7582);+#7582 = SURFACE_SIDE_STYLE('',(#7583));+#7583 = SURFACE_STYLE_FILL_AREA(#7584);+#7584 = FILL_AREA_STYLE('',(#7585));+#7585 = FILL_AREA_STYLE_COLOUR('',#7576);+#7586 = CURVE_STYLE('',#7587,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7587 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7588 = OVER_RIDING_STYLED_ITEM('overriding color',(#7589),#1488,#7579);+#7589 = PRESENTATION_STYLE_ASSIGNMENT((#7590,#7595));+#7590 = SURFACE_STYLE_USAGE(.BOTH.,#7591);+#7591 = SURFACE_SIDE_STYLE('',(#7592));+#7592 = SURFACE_STYLE_FILL_AREA(#7593);+#7593 = FILL_AREA_STYLE('',(#7594));+#7594 = FILL_AREA_STYLE_COLOUR('',#7576);+#7595 = CURVE_STYLE('',#7596,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7596 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7597 = OVER_RIDING_STYLED_ITEM('overriding color',(#7598),#1608,#7579);+#7598 = PRESENTATION_STYLE_ASSIGNMENT((#7599,#7604));+#7599 = SURFACE_STYLE_USAGE(.BOTH.,#7600);+#7600 = SURFACE_SIDE_STYLE('',(#7601));+#7601 = SURFACE_STYLE_FILL_AREA(#7602);+#7602 = FILL_AREA_STYLE('',(#7603));+#7603 = FILL_AREA_STYLE_COLOUR('',#7576);+#7604 = CURVE_STYLE('',#7605,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7605 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7606 = OVER_RIDING_STYLED_ITEM('overriding color',(#7607),#1721,#7579);+#7607 = PRESENTATION_STYLE_ASSIGNMENT((#7608,#7613));+#7608 = SURFACE_STYLE_USAGE(.BOTH.,#7609);+#7609 = SURFACE_SIDE_STYLE('',(#7610));+#7610 = SURFACE_STYLE_FILL_AREA(#7611);+#7611 = FILL_AREA_STYLE('',(#7612));+#7612 = FILL_AREA_STYLE_COLOUR('',#7576);+#7613 = CURVE_STYLE('',#7614,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7614 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7615 = OVER_RIDING_STYLED_ITEM('overriding color',(#7616),#1966,#7579);+#7616 = PRESENTATION_STYLE_ASSIGNMENT((#7617,#7622));+#7617 = SURFACE_STYLE_USAGE(.BOTH.,#7618);+#7618 = SURFACE_SIDE_STYLE('',(#7619));+#7619 = SURFACE_STYLE_FILL_AREA(#7620);+#7620 = FILL_AREA_STYLE('',(#7621));+#7621 = FILL_AREA_STYLE_COLOUR('',#7576);+#7622 = CURVE_STYLE('',#7623,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7623 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7624 = OVER_RIDING_STYLED_ITEM('overriding color',(#7625),#2072,#7579);+#7625 = PRESENTATION_STYLE_ASSIGNMENT((#7626,#7631));+#7626 = SURFACE_STYLE_USAGE(.BOTH.,#7627);+#7627 = SURFACE_SIDE_STYLE('',(#7628));+#7628 = SURFACE_STYLE_FILL_AREA(#7629);+#7629 = FILL_AREA_STYLE('',(#7630));+#7630 = FILL_AREA_STYLE_COLOUR('',#7576);+#7631 = CURVE_STYLE('',#7632,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7632 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7633 = OVER_RIDING_STYLED_ITEM('overriding color',(#7634),#2164,#7579);+#7634 = PRESENTATION_STYLE_ASSIGNMENT((#7635,#7640));+#7635 = SURFACE_STYLE_USAGE(.BOTH.,#7636);+#7636 = SURFACE_SIDE_STYLE('',(#7637));+#7637 = SURFACE_STYLE_FILL_AREA(#7638);+#7638 = FILL_AREA_STYLE('',(#7639));+#7639 = FILL_AREA_STYLE_COLOUR('',#7576);+#7640 = CURVE_STYLE('',#7641,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7641 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7642 = OVER_RIDING_STYLED_ITEM('overriding color',(#7643),#2256,#7579);+#7643 = PRESENTATION_STYLE_ASSIGNMENT((#7644,#7649));+#7644 = SURFACE_STYLE_USAGE(.BOTH.,#7645);+#7645 = SURFACE_SIDE_STYLE('',(#7646));+#7646 = SURFACE_STYLE_FILL_AREA(#7647);+#7647 = FILL_AREA_STYLE('',(#7648));+#7648 = FILL_AREA_STYLE_COLOUR('',#7576);+#7649 = CURVE_STYLE('',#7650,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7650 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7651 = OVER_RIDING_STYLED_ITEM('overriding color',(#7652),#2313,#7579);+#7652 = PRESENTATION_STYLE_ASSIGNMENT((#7653,#7658));+#7653 = SURFACE_STYLE_USAGE(.BOTH.,#7654);+#7654 = SURFACE_SIDE_STYLE('',(#7655));+#7655 = SURFACE_STYLE_FILL_AREA(#7656);+#7656 = FILL_AREA_STYLE('',(#7657));+#7657 = FILL_AREA_STYLE_COLOUR('',#7576);+#7658 = CURVE_STYLE('',#7659,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7659 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7660 = OVER_RIDING_STYLED_ITEM('overriding color',(#7661),#2370,#7579);+#7661 = PRESENTATION_STYLE_ASSIGNMENT((#7662,#7667));+#7662 = SURFACE_STYLE_USAGE(.BOTH.,#7663);+#7663 = SURFACE_SIDE_STYLE('',(#7664));+#7664 = SURFACE_STYLE_FILL_AREA(#7665);+#7665 = FILL_AREA_STYLE('',(#7666));+#7666 = FILL_AREA_STYLE_COLOUR('',#7576);+#7667 = CURVE_STYLE('',#7668,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7668 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7669 = OVER_RIDING_STYLED_ITEM('overriding color',(#7670),#2417,#7579);+#7670 = PRESENTATION_STYLE_ASSIGNMENT((#7671,#7676));+#7671 = SURFACE_STYLE_USAGE(.BOTH.,#7672);+#7672 = SURFACE_SIDE_STYLE('',(#7673));+#7673 = SURFACE_STYLE_FILL_AREA(#7674);+#7674 = FILL_AREA_STYLE('',(#7675));+#7675 = FILL_AREA_STYLE_COLOUR('',#7576);+#7676 = CURVE_STYLE('',#7677,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7677 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7678 = OVER_RIDING_STYLED_ITEM('overriding color',(#7679),#2443,#7579);+#7679 = PRESENTATION_STYLE_ASSIGNMENT((#7680,#7685));+#7680 = SURFACE_STYLE_USAGE(.BOTH.,#7681);+#7681 = SURFACE_SIDE_STYLE('',(#7682));+#7682 = SURFACE_STYLE_FILL_AREA(#7683);+#7683 = FILL_AREA_STYLE('',(#7684));+#7684 = FILL_AREA_STYLE_COLOUR('',#7576);+#7685 = CURVE_STYLE('',#7686,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7686 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7687 = OVER_RIDING_STYLED_ITEM('overriding color',(#7688),#2469,#7579);+#7688 = PRESENTATION_STYLE_ASSIGNMENT((#7689,#7694));+#7689 = SURFACE_STYLE_USAGE(.BOTH.,#7690);+#7690 = SURFACE_SIDE_STYLE('',(#7691));+#7691 = SURFACE_STYLE_FILL_AREA(#7692);+#7692 = FILL_AREA_STYLE('',(#7693));+#7693 = FILL_AREA_STYLE_COLOUR('',#7576);+#7694 = CURVE_STYLE('',#7695,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7696 = OVER_RIDING_STYLED_ITEM('overriding color',(#7697),#2526,#7579);+#7697 = PRESENTATION_STYLE_ASSIGNMENT((#7698,#7703));+#7698 = SURFACE_STYLE_USAGE(.BOTH.,#7699);+#7699 = SURFACE_SIDE_STYLE('',(#7700));+#7700 = SURFACE_STYLE_FILL_AREA(#7701);+#7701 = FILL_AREA_STYLE('',(#7702));+#7702 = FILL_AREA_STYLE_COLOUR('',#7576);+#7703 = CURVE_STYLE('',#7704,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7704 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7705 = OVER_RIDING_STYLED_ITEM('overriding color',(#7706),#2553,#7579);+#7706 = PRESENTATION_STYLE_ASSIGNMENT((#7707,#7712));+#7707 = SURFACE_STYLE_USAGE(.BOTH.,#7708);+#7708 = SURFACE_SIDE_STYLE('',(#7709));+#7709 = SURFACE_STYLE_FILL_AREA(#7710);+#7710 = FILL_AREA_STYLE('',(#7711));+#7711 = FILL_AREA_STYLE_COLOUR('',#7576);+#7712 = CURVE_STYLE('',#7713,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7713 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7714 = OVER_RIDING_STYLED_ITEM('overriding color',(#7715),#2590,#7579);+#7715 = PRESENTATION_STYLE_ASSIGNMENT((#7716,#7721));+#7716 = SURFACE_STYLE_USAGE(.BOTH.,#7717);+#7717 = SURFACE_SIDE_STYLE('',(#7718));+#7718 = SURFACE_STYLE_FILL_AREA(#7719);+#7719 = FILL_AREA_STYLE('',(#7720));+#7720 = FILL_AREA_STYLE_COLOUR('',#7576);+#7721 = CURVE_STYLE('',#7722,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7722 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7723 = OVER_RIDING_STYLED_ITEM('overriding color',(#7724),#2637,#7579);+#7724 = PRESENTATION_STYLE_ASSIGNMENT((#7725,#7730));+#7725 = SURFACE_STYLE_USAGE(.BOTH.,#7726);+#7726 = SURFACE_SIDE_STYLE('',(#7727));+#7727 = SURFACE_STYLE_FILL_AREA(#7728);+#7728 = FILL_AREA_STYLE('',(#7729));+#7729 = FILL_AREA_STYLE_COLOUR('',#7576);+#7730 = CURVE_STYLE('',#7731,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7731 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7732 = OVER_RIDING_STYLED_ITEM('overriding color',(#7733),#2663,#7579);+#7733 = PRESENTATION_STYLE_ASSIGNMENT((#7734,#7739));+#7734 = SURFACE_STYLE_USAGE(.BOTH.,#7735);+#7735 = SURFACE_SIDE_STYLE('',(#7736));+#7736 = SURFACE_STYLE_FILL_AREA(#7737);+#7737 = FILL_AREA_STYLE('',(#7738));+#7738 = FILL_AREA_STYLE_COLOUR('',#7576);+#7739 = CURVE_STYLE('',#7740,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7740 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7741 = OVER_RIDING_STYLED_ITEM('overriding color',(#7742),#2689,#7579);+#7742 = PRESENTATION_STYLE_ASSIGNMENT((#7743,#7748));+#7743 = SURFACE_STYLE_USAGE(.BOTH.,#7744);+#7744 = SURFACE_SIDE_STYLE('',(#7745));+#7745 = SURFACE_STYLE_FILL_AREA(#7746);+#7746 = FILL_AREA_STYLE('',(#7747));+#7747 = FILL_AREA_STYLE_COLOUR('',#7576);+#7748 = CURVE_STYLE('',#7749,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7749 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7750 = OVER_RIDING_STYLED_ITEM('overriding color',(#7751),#2696,#7579);+#7751 = PRESENTATION_STYLE_ASSIGNMENT((#7752,#7757));+#7752 = SURFACE_STYLE_USAGE(.BOTH.,#7753);+#7753 = SURFACE_SIDE_STYLE('',(#7754));+#7754 = SURFACE_STYLE_FILL_AREA(#7755);+#7755 = FILL_AREA_STYLE('',(#7756));+#7756 = FILL_AREA_STYLE_COLOUR('',#7576);+#7757 = CURVE_STYLE('',#7758,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7758 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7759 = OVER_RIDING_STYLED_ITEM('overriding color',(#7760),#2743,#7579);+#7760 = PRESENTATION_STYLE_ASSIGNMENT((#7761,#7766));+#7761 = SURFACE_STYLE_USAGE(.BOTH.,#7762);+#7762 = SURFACE_SIDE_STYLE('',(#7763));+#7763 = SURFACE_STYLE_FILL_AREA(#7764);+#7764 = FILL_AREA_STYLE('',(#7765));+#7765 = FILL_AREA_STYLE_COLOUR('',#7576);+#7766 = CURVE_STYLE('',#7767,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7767 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7768 = OVER_RIDING_STYLED_ITEM('overriding color',(#7769),#2770,#7579);+#7769 = PRESENTATION_STYLE_ASSIGNMENT((#7770,#7775));+#7770 = SURFACE_STYLE_USAGE(.BOTH.,#7771);+#7771 = SURFACE_SIDE_STYLE('',(#7772));+#7772 = SURFACE_STYLE_FILL_AREA(#7773);+#7773 = FILL_AREA_STYLE('',(#7774));+#7774 = FILL_AREA_STYLE_COLOUR('',#7576);+#7775 = CURVE_STYLE('',#7776,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7776 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7777 = OVER_RIDING_STYLED_ITEM('overriding color',(#7778),#2797,#7579);+#7778 = PRESENTATION_STYLE_ASSIGNMENT((#7779,#7784));+#7779 = SURFACE_STYLE_USAGE(.BOTH.,#7780);+#7780 = SURFACE_SIDE_STYLE('',(#7781));+#7781 = SURFACE_STYLE_FILL_AREA(#7782);+#7782 = FILL_AREA_STYLE('',(#7783));+#7783 = FILL_AREA_STYLE_COLOUR('',#7576);+#7784 = CURVE_STYLE('',#7785,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7785 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7786 = OVER_RIDING_STYLED_ITEM('overriding color',(#7787),#2824,#7579);+#7787 = PRESENTATION_STYLE_ASSIGNMENT((#7788,#7793));+#7788 = SURFACE_STYLE_USAGE(.BOTH.,#7789);+#7789 = SURFACE_SIDE_STYLE('',(#7790));+#7790 = SURFACE_STYLE_FILL_AREA(#7791);+#7791 = FILL_AREA_STYLE('',(#7792));+#7792 = FILL_AREA_STYLE_COLOUR('',#7576);+#7793 = CURVE_STYLE('',#7794,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7794 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7795 = OVER_RIDING_STYLED_ITEM('overriding color',(#7796),#2851,#7579);+#7796 = PRESENTATION_STYLE_ASSIGNMENT((#7797,#7802));+#7797 = SURFACE_STYLE_USAGE(.BOTH.,#7798);+#7798 = SURFACE_SIDE_STYLE('',(#7799));+#7799 = SURFACE_STYLE_FILL_AREA(#7800);+#7800 = FILL_AREA_STYLE('',(#7801));+#7801 = FILL_AREA_STYLE_COLOUR('',#7576);+#7802 = CURVE_STYLE('',#7803,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7803 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7804 = OVER_RIDING_STYLED_ITEM('overriding color',(#7805),#2878,#7579);+#7805 = PRESENTATION_STYLE_ASSIGNMENT((#7806,#7811)); #7806 = SURFACE_STYLE_USAGE(.BOTH.,#7807); #7807 = SURFACE_SIDE_STYLE('',(#7808)); #7808 = SURFACE_STYLE_FILL_AREA(#7809); #7809 = FILL_AREA_STYLE('',(#7810));-#7810 = FILL_AREA_STYLE_COLOUR('',#7782);-#7811 = OVER_RIDING_STYLED_ITEM('overriding color',(#7812),#2158,#7783);-#7812 = PRESENTATION_STYLE_ASSIGNMENT((#7813));-#7813 = SURFACE_STYLE_USAGE(.BOTH.,#7814);-#7814 = SURFACE_SIDE_STYLE('',(#7815));-#7815 = SURFACE_STYLE_FILL_AREA(#7816);-#7816 = FILL_AREA_STYLE('',(#7817));-#7817 = FILL_AREA_STYLE_COLOUR('',#7782);-#7818 = OVER_RIDING_STYLED_ITEM('overriding color',(#7819),#2268,#7783);-#7819 = PRESENTATION_STYLE_ASSIGNMENT((#7820));-#7820 = SURFACE_STYLE_USAGE(.BOTH.,#7821);-#7821 = SURFACE_SIDE_STYLE('',(#7822));-#7822 = SURFACE_STYLE_FILL_AREA(#7823);-#7823 = FILL_AREA_STYLE('',(#7824));-#7824 = FILL_AREA_STYLE_COLOUR('',#7782);-#7825 = OVER_RIDING_STYLED_ITEM('overriding color',(#7826),#2368,#7783);-#7826 = PRESENTATION_STYLE_ASSIGNMENT((#7827));-#7827 = SURFACE_STYLE_USAGE(.BOTH.,#7828);-#7828 = SURFACE_SIDE_STYLE('',(#7829));-#7829 = SURFACE_STYLE_FILL_AREA(#7830);-#7830 = FILL_AREA_STYLE('',(#7831));-#7831 = FILL_AREA_STYLE_COLOUR('',#7782);-#7832 = OVER_RIDING_STYLED_ITEM('overriding color',(#7833),#2468,#7783);-#7833 = PRESENTATION_STYLE_ASSIGNMENT((#7834));-#7834 = SURFACE_STYLE_USAGE(.BOTH.,#7835);-#7835 = SURFACE_SIDE_STYLE('',(#7836));-#7836 = SURFACE_STYLE_FILL_AREA(#7837);-#7837 = FILL_AREA_STYLE('',(#7838));-#7838 = FILL_AREA_STYLE_COLOUR('',#7782);-#7839 = OVER_RIDING_STYLED_ITEM('overriding color',(#7840),#2544,#7783);-#7840 = PRESENTATION_STYLE_ASSIGNMENT((#7841));-#7841 = SURFACE_STYLE_USAGE(.BOTH.,#7842);-#7842 = SURFACE_SIDE_STYLE('',(#7843));-#7843 = SURFACE_STYLE_FILL_AREA(#7844);-#7844 = FILL_AREA_STYLE('',(#7845));-#7845 = FILL_AREA_STYLE_COLOUR('',#7782);-#7846 = OVER_RIDING_STYLED_ITEM('overriding color',(#7847),#2598,#7783);-#7847 = PRESENTATION_STYLE_ASSIGNMENT((#7848));-#7848 = SURFACE_STYLE_USAGE(.BOTH.,#7849);-#7849 = SURFACE_SIDE_STYLE('',(#7850));-#7850 = SURFACE_STYLE_FILL_AREA(#7851);-#7851 = FILL_AREA_STYLE('',(#7852));-#7852 = FILL_AREA_STYLE_COLOUR('',#7782);-#7853 = OVER_RIDING_STYLED_ITEM('overriding color',(#7854),#2669,#7783);-#7854 = PRESENTATION_STYLE_ASSIGNMENT((#7855));-#7855 = SURFACE_STYLE_USAGE(.BOTH.,#7856);-#7856 = SURFACE_SIDE_STYLE('',(#7857));-#7857 = SURFACE_STYLE_FILL_AREA(#7858);-#7858 = FILL_AREA_STYLE('',(#7859));-#7859 = FILL_AREA_STYLE_COLOUR('',#7782);-#7860 = OVER_RIDING_STYLED_ITEM('overriding color',(#7861),#2718,#7783);-#7861 = PRESENTATION_STYLE_ASSIGNMENT((#7862));-#7862 = SURFACE_STYLE_USAGE(.BOTH.,#7863);-#7863 = SURFACE_SIDE_STYLE('',(#7864));-#7864 = SURFACE_STYLE_FILL_AREA(#7865);-#7865 = FILL_AREA_STYLE('',(#7866));-#7866 = FILL_AREA_STYLE_COLOUR('',#7782);-#7867 = OVER_RIDING_STYLED_ITEM('overriding color',(#7868),#2767,#7783);-#7868 = PRESENTATION_STYLE_ASSIGNMENT((#7869));-#7869 = SURFACE_STYLE_USAGE(.BOTH.,#7870);-#7870 = SURFACE_SIDE_STYLE('',(#7871));-#7871 = SURFACE_STYLE_FILL_AREA(#7872);-#7872 = FILL_AREA_STYLE('',(#7873));-#7873 = FILL_AREA_STYLE_COLOUR('',#7782);-#7874 = OVER_RIDING_STYLED_ITEM('overriding color',(#7875),#2843,#7783);-#7875 = PRESENTATION_STYLE_ASSIGNMENT((#7876));-#7876 = SURFACE_STYLE_USAGE(.BOTH.,#7877);-#7877 = SURFACE_SIDE_STYLE('',(#7878));-#7878 = SURFACE_STYLE_FILL_AREA(#7879);-#7879 = FILL_AREA_STYLE('',(#7880));-#7880 = FILL_AREA_STYLE_COLOUR('',#7782);-#7881 = OVER_RIDING_STYLED_ITEM('overriding color',(#7882),#2893,#7783);-#7882 = PRESENTATION_STYLE_ASSIGNMENT((#7883));-#7883 = SURFACE_STYLE_USAGE(.BOTH.,#7884);-#7884 = SURFACE_SIDE_STYLE('',(#7885));-#7885 = SURFACE_STYLE_FILL_AREA(#7886);-#7886 = FILL_AREA_STYLE('',(#7887));-#7887 = FILL_AREA_STYLE_COLOUR('',#7782);-#7888 = OVER_RIDING_STYLED_ITEM('overriding color',(#7889),#2948,#7783);-#7889 = PRESENTATION_STYLE_ASSIGNMENT((#7890));-#7890 = SURFACE_STYLE_USAGE(.BOTH.,#7891);-#7891 = SURFACE_SIDE_STYLE('',(#7892));-#7892 = SURFACE_STYLE_FILL_AREA(#7893);-#7893 = FILL_AREA_STYLE('',(#7894));-#7894 = FILL_AREA_STYLE_COLOUR('',#7782);-#7895 = OVER_RIDING_STYLED_ITEM('overriding color',(#7896),#3019,#7783);-#7896 = PRESENTATION_STYLE_ASSIGNMENT((#7897));-#7897 = SURFACE_STYLE_USAGE(.BOTH.,#7898);-#7898 = SURFACE_SIDE_STYLE('',(#7899));-#7899 = SURFACE_STYLE_FILL_AREA(#7900);-#7900 = FILL_AREA_STYLE('',(#7901));-#7901 = FILL_AREA_STYLE_COLOUR('',#7782);-#7902 = OVER_RIDING_STYLED_ITEM('overriding color',(#7903),#3046,#7783);-#7903 = PRESENTATION_STYLE_ASSIGNMENT((#7904));-#7904 = SURFACE_STYLE_USAGE(.BOTH.,#7905);-#7905 = SURFACE_SIDE_STYLE('',(#7906));-#7906 = SURFACE_STYLE_FILL_AREA(#7907);-#7907 = FILL_AREA_STYLE('',(#7908));-#7908 = FILL_AREA_STYLE_COLOUR('',#7782);-#7909 = OVER_RIDING_STYLED_ITEM('overriding color',(#7910),#3073,#7783);-#7910 = PRESENTATION_STYLE_ASSIGNMENT((#7911));-#7911 = SURFACE_STYLE_USAGE(.BOTH.,#7912);-#7912 = SURFACE_SIDE_STYLE('',(#7913));-#7913 = SURFACE_STYLE_FILL_AREA(#7914);-#7914 = FILL_AREA_STYLE('',(#7915));-#7915 = FILL_AREA_STYLE_COLOUR('',#7782);-#7916 = OVER_RIDING_STYLED_ITEM('overriding color',(#7917),#3080,#7783);-#7917 = PRESENTATION_STYLE_ASSIGNMENT((#7918));-#7918 = SURFACE_STYLE_USAGE(.BOTH.,#7919);-#7919 = SURFACE_SIDE_STYLE('',(#7920));-#7920 = SURFACE_STYLE_FILL_AREA(#7921);-#7921 = FILL_AREA_STYLE('',(#7922));-#7922 = FILL_AREA_STYLE_COLOUR('',#7782);-#7923 = OVER_RIDING_STYLED_ITEM('overriding color',(#7924),#3129,#7783);-#7924 = PRESENTATION_STYLE_ASSIGNMENT((#7925));-#7925 = SURFACE_STYLE_USAGE(.BOTH.,#7926);-#7926 = SURFACE_SIDE_STYLE('',(#7927));-#7927 = SURFACE_STYLE_FILL_AREA(#7928);-#7928 = FILL_AREA_STYLE('',(#7929));-#7929 = FILL_AREA_STYLE_COLOUR('',#7782);-#7930 = OVER_RIDING_STYLED_ITEM('overriding color',(#7931),#3157,#7783);-#7931 = PRESENTATION_STYLE_ASSIGNMENT((#7932));-#7932 = SURFACE_STYLE_USAGE(.BOTH.,#7933);-#7933 = SURFACE_SIDE_STYLE('',(#7934));-#7934 = SURFACE_STYLE_FILL_AREA(#7935);-#7935 = FILL_AREA_STYLE('',(#7936));-#7936 = FILL_AREA_STYLE_COLOUR('',#7782);-#7937 = OVER_RIDING_STYLED_ITEM('overriding color',(#7938),#3185,#7783);-#7938 = PRESENTATION_STYLE_ASSIGNMENT((#7939));-#7939 = SURFACE_STYLE_USAGE(.BOTH.,#7940);-#7940 = SURFACE_SIDE_STYLE('',(#7941));-#7941 = SURFACE_STYLE_FILL_AREA(#7942);-#7942 = FILL_AREA_STYLE('',(#7943));-#7943 = FILL_AREA_STYLE_COLOUR('',#7782);-#7944 = OVER_RIDING_STYLED_ITEM('overriding color',(#7945),#3213,#7783);-#7945 = PRESENTATION_STYLE_ASSIGNMENT((#7946));-#7946 = SURFACE_STYLE_USAGE(.BOTH.,#7947);-#7947 = SURFACE_SIDE_STYLE('',(#7948));-#7948 = SURFACE_STYLE_FILL_AREA(#7949);-#7949 = FILL_AREA_STYLE('',(#7950));-#7950 = FILL_AREA_STYLE_COLOUR('',#7782);-#7951 = OVER_RIDING_STYLED_ITEM('overriding color',(#7952),#3241,#7783);-#7952 = PRESENTATION_STYLE_ASSIGNMENT((#7953));-#7953 = SURFACE_STYLE_USAGE(.BOTH.,#7954);-#7954 = SURFACE_SIDE_STYLE('',(#7955));-#7955 = SURFACE_STYLE_FILL_AREA(#7956);-#7956 = FILL_AREA_STYLE('',(#7957));-#7957 = FILL_AREA_STYLE_COLOUR('',#7782);-#7958 = OVER_RIDING_STYLED_ITEM('overriding color',(#7959),#3269,#7783);-#7959 = PRESENTATION_STYLE_ASSIGNMENT((#7960));-#7960 = SURFACE_STYLE_USAGE(.BOTH.,#7961);-#7961 = SURFACE_SIDE_STYLE('',(#7962));-#7962 = SURFACE_STYLE_FILL_AREA(#7963);-#7963 = FILL_AREA_STYLE('',(#7964));-#7964 = FILL_AREA_STYLE_COLOUR('',#7782);-#7965 = OVER_RIDING_STYLED_ITEM('overriding color',(#7966),#3297,#7783);-#7966 = PRESENTATION_STYLE_ASSIGNMENT((#7967));-#7967 = SURFACE_STYLE_USAGE(.BOTH.,#7968);-#7968 = SURFACE_SIDE_STYLE('',(#7969));-#7969 = SURFACE_STYLE_FILL_AREA(#7970);-#7970 = FILL_AREA_STYLE('',(#7971));-#7971 = FILL_AREA_STYLE_COLOUR('',#7782);-#7972 = STYLED_ITEM('color',(#7973),#3304);-#7973 = PRESENTATION_STYLE_ASSIGNMENT((#7974));-#7974 = SURFACE_STYLE_USAGE(.BOTH.,#7975);-#7975 = SURFACE_SIDE_STYLE('',(#7976));-#7976 = SURFACE_STYLE_FILL_AREA(#7977);-#7977 = FILL_AREA_STYLE('',(#7978));-#7978 = FILL_AREA_STYLE_COLOUR('',#7979);-#7979 = COLOUR_RGB('',0.690196085623,0.533333328131,0.278431365803);-#7980 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(- #7981,#7991,#7998,#8007,#8014,#8023,#8030,#8039,#8046,#8055,#8062,- #8071,#8078,#8087,#8094,#8103,#8110,#8119,#8126,#8135,#8142,#8151,- #8158,#8167,#8174,#8183,#8190,#8199,#8206,#8215),#7763);-#7981 = STYLED_ITEM('color',(#7982),#3989);-#7982 = PRESENTATION_STYLE_ASSIGNMENT((#7983,#7989));-#7983 = SURFACE_STYLE_USAGE(.BOTH.,#7984);-#7984 = SURFACE_SIDE_STYLE('',(#7985));-#7985 = SURFACE_STYLE_FILL_AREA(#7986);-#7986 = FILL_AREA_STYLE('',(#7987));-#7987 = FILL_AREA_STYLE_COLOUR('',#7988);-#7988 = COLOUR_RGB('',0.896243869286,0.896243869286,0.886003966688);-#7989 = CURVE_STYLE('',#7990,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#7990 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#7991 = OVER_RIDING_STYLED_ITEM('overriding color',(#7992),#3991,#7981);-#7992 = PRESENTATION_STYLE_ASSIGNMENT((#7993));-#7993 = SURFACE_STYLE_USAGE(.BOTH.,#7994);-#7994 = SURFACE_SIDE_STYLE('',(#7995));-#7995 = SURFACE_STYLE_FILL_AREA(#7996);-#7996 = FILL_AREA_STYLE('',(#7997));-#7997 = FILL_AREA_STYLE_COLOUR('',#7988);-#7998 = STYLED_ITEM('color',(#7999),#4287);-#7999 = PRESENTATION_STYLE_ASSIGNMENT((#8000,#8005));-#8000 = SURFACE_STYLE_USAGE(.BOTH.,#8001);-#8001 = SURFACE_SIDE_STYLE('',(#8002));-#8002 = SURFACE_STYLE_FILL_AREA(#8003);-#8003 = FILL_AREA_STYLE('',(#8004));-#8004 = FILL_AREA_STYLE_COLOUR('',#7988);-#8005 = CURVE_STYLE('',#8006,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8006 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8007 = OVER_RIDING_STYLED_ITEM('overriding color',(#8008),#4289,#7998);-#8008 = PRESENTATION_STYLE_ASSIGNMENT((#8009));-#8009 = SURFACE_STYLE_USAGE(.BOTH.,#8010);-#8010 = SURFACE_SIDE_STYLE('',(#8011));-#8011 = SURFACE_STYLE_FILL_AREA(#8012);-#8012 = FILL_AREA_STYLE('',(#8013));-#8013 = FILL_AREA_STYLE_COLOUR('',#7988);-#8014 = STYLED_ITEM('color',(#8015),#4393);-#8015 = PRESENTATION_STYLE_ASSIGNMENT((#8016,#8021));-#8016 = SURFACE_STYLE_USAGE(.BOTH.,#8017);-#8017 = SURFACE_SIDE_STYLE('',(#8018));-#8018 = SURFACE_STYLE_FILL_AREA(#8019);-#8019 = FILL_AREA_STYLE('',(#8020));-#8020 = FILL_AREA_STYLE_COLOUR('',#7988);-#8021 = CURVE_STYLE('',#8022,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8022 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8023 = OVER_RIDING_STYLED_ITEM('overriding color',(#8024),#4395,#8014);-#8024 = PRESENTATION_STYLE_ASSIGNMENT((#8025));-#8025 = SURFACE_STYLE_USAGE(.BOTH.,#8026);-#8026 = SURFACE_SIDE_STYLE('',(#8027));-#8027 = SURFACE_STYLE_FILL_AREA(#8028);-#8028 = FILL_AREA_STYLE('',(#8029));-#8029 = FILL_AREA_STYLE_COLOUR('',#7988);-#8030 = STYLED_ITEM('color',(#8031),#4739);-#8031 = PRESENTATION_STYLE_ASSIGNMENT((#8032,#8037));-#8032 = SURFACE_STYLE_USAGE(.BOTH.,#8033);-#8033 = SURFACE_SIDE_STYLE('',(#8034));-#8034 = SURFACE_STYLE_FILL_AREA(#8035);-#8035 = FILL_AREA_STYLE('',(#8036));-#8036 = FILL_AREA_STYLE_COLOUR('',#7988);-#8037 = CURVE_STYLE('',#8038,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8038 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8039 = OVER_RIDING_STYLED_ITEM('overriding color',(#8040),#4741,#8030);-#8040 = PRESENTATION_STYLE_ASSIGNMENT((#8041));-#8041 = SURFACE_STYLE_USAGE(.BOTH.,#8042);-#8042 = SURFACE_SIDE_STYLE('',(#8043));-#8043 = SURFACE_STYLE_FILL_AREA(#8044);-#8044 = FILL_AREA_STYLE('',(#8045));-#8045 = FILL_AREA_STYLE_COLOUR('',#7988);-#8046 = STYLED_ITEM('color',(#8047),#4925);-#8047 = PRESENTATION_STYLE_ASSIGNMENT((#8048,#8053));-#8048 = SURFACE_STYLE_USAGE(.BOTH.,#8049);-#8049 = SURFACE_SIDE_STYLE('',(#8050));-#8050 = SURFACE_STYLE_FILL_AREA(#8051);-#8051 = FILL_AREA_STYLE('',(#8052));-#8052 = FILL_AREA_STYLE_COLOUR('',#7988);-#8053 = CURVE_STYLE('',#8054,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8054 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8055 = OVER_RIDING_STYLED_ITEM('overriding color',(#8056),#4927,#8046);-#8056 = PRESENTATION_STYLE_ASSIGNMENT((#8057));-#8057 = SURFACE_STYLE_USAGE(.BOTH.,#8058);-#8058 = SURFACE_SIDE_STYLE('',(#8059));-#8059 = SURFACE_STYLE_FILL_AREA(#8060);-#8060 = FILL_AREA_STYLE('',(#8061));-#8061 = FILL_AREA_STYLE_COLOUR('',#7988);-#8062 = STYLED_ITEM('color',(#8063),#5113);-#8063 = PRESENTATION_STYLE_ASSIGNMENT((#8064,#8069));-#8064 = SURFACE_STYLE_USAGE(.BOTH.,#8065);-#8065 = SURFACE_SIDE_STYLE('',(#8066));-#8066 = SURFACE_STYLE_FILL_AREA(#8067);-#8067 = FILL_AREA_STYLE('',(#8068));-#8068 = FILL_AREA_STYLE_COLOUR('',#7988);-#8069 = CURVE_STYLE('',#8070,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8070 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8071 = OVER_RIDING_STYLED_ITEM('overriding color',(#8072),#5115,#8062);-#8072 = PRESENTATION_STYLE_ASSIGNMENT((#8073));-#8073 = SURFACE_STYLE_USAGE(.BOTH.,#8074);-#8074 = SURFACE_SIDE_STYLE('',(#8075));-#8075 = SURFACE_STYLE_FILL_AREA(#8076);-#8076 = FILL_AREA_STYLE('',(#8077));-#8077 = FILL_AREA_STYLE_COLOUR('',#7988);-#8078 = STYLED_ITEM('color',(#8079),#5459);-#8079 = PRESENTATION_STYLE_ASSIGNMENT((#8080,#8085));-#8080 = SURFACE_STYLE_USAGE(.BOTH.,#8081);-#8081 = SURFACE_SIDE_STYLE('',(#8082));-#8082 = SURFACE_STYLE_FILL_AREA(#8083);-#8083 = FILL_AREA_STYLE('',(#8084));-#8084 = FILL_AREA_STYLE_COLOUR('',#7988);-#8085 = CURVE_STYLE('',#8086,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8086 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8087 = OVER_RIDING_STYLED_ITEM('overriding color',(#8088),#5461,#8078);-#8088 = PRESENTATION_STYLE_ASSIGNMENT((#8089));-#8089 = SURFACE_STYLE_USAGE(.BOTH.,#8090);-#8090 = SURFACE_SIDE_STYLE('',(#8091));-#8091 = SURFACE_STYLE_FILL_AREA(#8092);-#8092 = FILL_AREA_STYLE('',(#8093));-#8093 = FILL_AREA_STYLE_COLOUR('',#7988);-#8094 = STYLED_ITEM('color',(#8095),#5805);-#8095 = PRESENTATION_STYLE_ASSIGNMENT((#8096,#8101));-#8096 = SURFACE_STYLE_USAGE(.BOTH.,#8097);-#8097 = SURFACE_SIDE_STYLE('',(#8098));-#8098 = SURFACE_STYLE_FILL_AREA(#8099);-#8099 = FILL_AREA_STYLE('',(#8100));-#8100 = FILL_AREA_STYLE_COLOUR('',#7988);-#8101 = CURVE_STYLE('',#8102,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8103 = OVER_RIDING_STYLED_ITEM('overriding color',(#8104),#5807,#8094);-#8104 = PRESENTATION_STYLE_ASSIGNMENT((#8105));-#8105 = SURFACE_STYLE_USAGE(.BOTH.,#8106);-#8106 = SURFACE_SIDE_STYLE('',(#8107));-#8107 = SURFACE_STYLE_FILL_AREA(#8108);-#8108 = FILL_AREA_STYLE('',(#8109));-#8109 = FILL_AREA_STYLE_COLOUR('',#7988);-#8110 = STYLED_ITEM('color',(#8111),#6217);-#8111 = PRESENTATION_STYLE_ASSIGNMENT((#8112,#8117));-#8112 = SURFACE_STYLE_USAGE(.BOTH.,#8113);-#8113 = SURFACE_SIDE_STYLE('',(#8114));-#8114 = SURFACE_STYLE_FILL_AREA(#8115);-#8115 = FILL_AREA_STYLE('',(#8116));-#8116 = FILL_AREA_STYLE_COLOUR('',#7988);-#8117 = CURVE_STYLE('',#8118,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8118 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8119 = OVER_RIDING_STYLED_ITEM('overriding color',(#8120),#6219,#8110);-#8120 = PRESENTATION_STYLE_ASSIGNMENT((#8121));-#8121 = SURFACE_STYLE_USAGE(.BOTH.,#8122);-#8122 = SURFACE_SIDE_STYLE('',(#8123));-#8123 = SURFACE_STYLE_FILL_AREA(#8124);-#8124 = FILL_AREA_STYLE('',(#8125));-#8125 = FILL_AREA_STYLE_COLOUR('',#7988);-#8126 = STYLED_ITEM('color',(#8127),#6435);-#8127 = PRESENTATION_STYLE_ASSIGNMENT((#8128,#8133));-#8128 = SURFACE_STYLE_USAGE(.BOTH.,#8129);-#8129 = SURFACE_SIDE_STYLE('',(#8130));-#8130 = SURFACE_STYLE_FILL_AREA(#8131);-#8131 = FILL_AREA_STYLE('',(#8132));-#8132 = FILL_AREA_STYLE_COLOUR('',#7988);-#8133 = CURVE_STYLE('',#8134,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8134 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8135 = OVER_RIDING_STYLED_ITEM('overriding color',(#8136),#6437,#8126);-#8136 = PRESENTATION_STYLE_ASSIGNMENT((#8137));-#8137 = SURFACE_STYLE_USAGE(.BOTH.,#8138);-#8138 = SURFACE_SIDE_STYLE('',(#8139));-#8139 = SURFACE_STYLE_FILL_AREA(#8140);-#8140 = FILL_AREA_STYLE('',(#8141));-#8141 = FILL_AREA_STYLE_COLOUR('',#7988);-#8142 = STYLED_ITEM('color',(#8143),#6703);-#8143 = PRESENTATION_STYLE_ASSIGNMENT((#8144,#8149));-#8144 = SURFACE_STYLE_USAGE(.BOTH.,#8145);-#8145 = SURFACE_SIDE_STYLE('',(#8146));-#8146 = SURFACE_STYLE_FILL_AREA(#8147);-#8147 = FILL_AREA_STYLE('',(#8148));-#8148 = FILL_AREA_STYLE_COLOUR('',#7988);-#8149 = CURVE_STYLE('',#8150,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8150 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8151 = OVER_RIDING_STYLED_ITEM('overriding color',(#8152),#6705,#8142);-#8152 = PRESENTATION_STYLE_ASSIGNMENT((#8153));-#8153 = SURFACE_STYLE_USAGE(.BOTH.,#8154);-#8154 = SURFACE_SIDE_STYLE('',(#8155));-#8155 = SURFACE_STYLE_FILL_AREA(#8156);-#8156 = FILL_AREA_STYLE('',(#8157));-#8157 = FILL_AREA_STYLE_COLOUR('',#7988);-#8158 = STYLED_ITEM('color',(#8159),#7051);-#8159 = PRESENTATION_STYLE_ASSIGNMENT((#8160,#8165));-#8160 = SURFACE_STYLE_USAGE(.BOTH.,#8161);-#8161 = SURFACE_SIDE_STYLE('',(#8162));-#8162 = SURFACE_STYLE_FILL_AREA(#8163);-#8163 = FILL_AREA_STYLE('',(#8164));-#8164 = FILL_AREA_STYLE_COLOUR('',#7988);-#8165 = CURVE_STYLE('',#8166,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8166 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8167 = OVER_RIDING_STYLED_ITEM('overriding color',(#8168),#7053,#8158);-#8168 = PRESENTATION_STYLE_ASSIGNMENT((#8169));-#8169 = SURFACE_STYLE_USAGE(.BOTH.,#8170);-#8170 = SURFACE_SIDE_STYLE('',(#8171));-#8171 = SURFACE_STYLE_FILL_AREA(#8172);-#8172 = FILL_AREA_STYLE('',(#8173));-#8173 = FILL_AREA_STYLE_COLOUR('',#7988);-#8174 = STYLED_ITEM('color',(#8175),#7221);-#8175 = PRESENTATION_STYLE_ASSIGNMENT((#8176,#8181));-#8176 = SURFACE_STYLE_USAGE(.BOTH.,#8177);-#8177 = SURFACE_SIDE_STYLE('',(#8178));-#8178 = SURFACE_STYLE_FILL_AREA(#8179);-#8179 = FILL_AREA_STYLE('',(#8180));-#8180 = FILL_AREA_STYLE_COLOUR('',#7988);-#8181 = CURVE_STYLE('',#8182,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8182 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8183 = OVER_RIDING_STYLED_ITEM('overriding color',(#8184),#7223,#8174);-#8184 = PRESENTATION_STYLE_ASSIGNMENT((#8185));-#8185 = SURFACE_STYLE_USAGE(.BOTH.,#8186);-#8186 = SURFACE_SIDE_STYLE('',(#8187));-#8187 = SURFACE_STYLE_FILL_AREA(#8188);-#8188 = FILL_AREA_STYLE('',(#8189));-#8189 = FILL_AREA_STYLE_COLOUR('',#7988);-#8190 = STYLED_ITEM('color',(#8191),#7391);-#8191 = PRESENTATION_STYLE_ASSIGNMENT((#8192,#8197));-#8192 = SURFACE_STYLE_USAGE(.BOTH.,#8193);-#8193 = SURFACE_SIDE_STYLE('',(#8194));-#8194 = SURFACE_STYLE_FILL_AREA(#8195);-#8195 = FILL_AREA_STYLE('',(#8196));-#8196 = FILL_AREA_STYLE_COLOUR('',#7988);-#8197 = CURVE_STYLE('',#8198,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8198 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8199 = OVER_RIDING_STYLED_ITEM('overriding color',(#8200),#7393,#8190);-#8200 = PRESENTATION_STYLE_ASSIGNMENT((#8201));-#8201 = SURFACE_STYLE_USAGE(.BOTH.,#8202);-#8202 = SURFACE_SIDE_STYLE('',(#8203));-#8203 = SURFACE_STYLE_FILL_AREA(#8204);-#8204 = FILL_AREA_STYLE('',(#8205));-#8205 = FILL_AREA_STYLE_COLOUR('',#7988);-#8206 = STYLED_ITEM('color',(#8207),#7561);-#8207 = PRESENTATION_STYLE_ASSIGNMENT((#8208,#8213));-#8208 = SURFACE_STYLE_USAGE(.BOTH.,#8209);-#8209 = SURFACE_SIDE_STYLE('',(#8210));-#8210 = SURFACE_STYLE_FILL_AREA(#8211);-#8211 = FILL_AREA_STYLE('',(#8212));-#8212 = FILL_AREA_STYLE_COLOUR('',#7988);-#8213 = CURVE_STYLE('',#8214,POSITIVE_LENGTH_MEASURE(0.1),#7988);-#8214 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');-#8215 = OVER_RIDING_STYLED_ITEM('overriding color',(#8216),#7563,#8206);-#8216 = PRESENTATION_STYLE_ASSIGNMENT((#8217));-#8217 = SURFACE_STYLE_USAGE(.BOTH.,#8218);-#8218 = SURFACE_SIDE_STYLE('',(#8219));-#8219 = SURFACE_STYLE_FILL_AREA(#8220);-#8220 = FILL_AREA_STYLE('',(#8221));-#8221 = FILL_AREA_STYLE_COLOUR('',#7988);+#7810 = FILL_AREA_STYLE_COLOUR('',#7576);+#7811 = CURVE_STYLE('',#7812,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7812 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7813 = OVER_RIDING_STYLED_ITEM('overriding color',(#7814),#2905,#7579);+#7814 = PRESENTATION_STYLE_ASSIGNMENT((#7815,#7820));+#7815 = SURFACE_STYLE_USAGE(.BOTH.,#7816);+#7816 = SURFACE_SIDE_STYLE('',(#7817));+#7817 = SURFACE_STYLE_FILL_AREA(#7818);+#7818 = FILL_AREA_STYLE('',(#7819));+#7819 = FILL_AREA_STYLE_COLOUR('',#7576);+#7820 = CURVE_STYLE('',#7821,POSITIVE_LENGTH_MEASURE(0.1),#7576);+#7821 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#7822 = STYLED_ITEM('color',(#7823),#2912);+#7823 = PRESENTATION_STYLE_ASSIGNMENT((#7824,#7830));+#7824 = SURFACE_STYLE_USAGE(.BOTH.,#7825);+#7825 = SURFACE_SIDE_STYLE('',(#7826));+#7826 = SURFACE_STYLE_FILL_AREA(#7827);+#7827 = FILL_AREA_STYLE('',(#7828));+#7828 = FILL_AREA_STYLE_COLOUR('',#7829);+#7829 = COLOUR_RGB('',0.690196085623,0.533333328131,0.278431365803);+#7830 = CURVE_STYLE('',#7831,POSITIVE_LENGTH_MEASURE(0.1),#7829);+#7831 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); ENDSEC; END-ISO-10303-21;
kicad/3d/IN-S63BTG.step+862−842@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-09-30T09:02:08',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-09-30T13:49:32',('Author'),( 'Open CASCADE'),'Open CASCADE STEP processor 8.0','Open CASCADE 8.0' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));@@ -25,11 +25,11 @@ DATA; #13 = DIRECTION('',(0.,0.,1.)); #14 = DIRECTION('',(1.,0.,-0.)); #15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);-#16 = CARTESIAN_POINT('',(0.,0.55,0.55));+#16 = CARTESIAN_POINT('',(0.,0.275,0.275)); #17 = DIRECTION('',(0.,-1.,1.110223024625E-16)); #18 = DIRECTION('',(1.,0.,0.)); #19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);-#20 = CARTESIAN_POINT('',(0.,0.55,0.55));+#20 = CARTESIAN_POINT('',(0.,0.275,0.275)); #21 = DIRECTION('',(0.,-1.,1.110223024625E-16)); #22 = DIRECTION('',(1.,0.,0.)); #23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) @@ -52,7 +52,7 @@ GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT( #35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); #36 = SHAPE_REPRESENTATION('',(#11,#37),#41); #37 = AXIS2_PLACEMENT_3D('',#38,#39,#40);-#38 = CARTESIAN_POINT('',(0.,-0.55,0.55));+#38 = CARTESIAN_POINT('',(0.,-0.275,0.275)); #39 = DIRECTION('',(-0.,1.,1.110223024625E-16)); #40 = DIRECTION('',(1.,0.,0.)); #41 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) @@ -79,8176 +79,8725 @@ SHAPE_REPRESENTATION_RELATIONSHIP() ); #56 = PRODUCT('LED_0603_1608Metric','LED_0603_1608Metric','',(#57)); #57 = PRODUCT_CONTEXT('',#2,'mechanical'); #58 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');-#59 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#60),#3610);+#59 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#60),#3243); #60 = MANIFOLD_SOLID_BREP('',#61);-#61 = CLOSED_SHELL('',(#62,#182,#319,#548,#597,#702,#788,#815,#902,#956,- #1152,#1538,#1739,#1793,#1874,#1951,#2102,#2151,#2200,#2249,#2322,- #2329,#2492,#2546,#2573,#2622,#2650,#2678,#2710,#2737,#2764,#2835,- #2889,#2939,#2988,#3015,#3091,#3140,#3167,#3220,#3270,#3319,#3373,- #3490,#3517,#3524,#3571,#3578,#3591,#3604));-#62 = ADVANCED_FACE('',(#63),#77,.F.);+#61 = CLOSED_SHELL('',(#62,#170,#295,#497,#540,#636,#713,#737,#816,#864,+ #1043,#1393,#1577,#1625,#1697,#1766,#1899,#1942,#1985,#2028,#2093,+ #2100,#2244,#2291,#2315,#2359,#2386,#2413,#2440,#2464,#2488,#2550,+ #2596,#2643,#2686,#2710,#2777,#2820,#2844,#2892,#2939,#2983,#3030,+ #3132,#3156,#3163,#3204,#3211,#3224,#3237));+#62 = ADVANCED_FACE('',(#63),#76,.F.); #63 = FACE_BOUND('',#64,.F.);-#64 = EDGE_LOOP('',(#65,#100,#128,#156));+#64 = EDGE_LOOP('',(#65,#97,#122,#147)); #65 = ORIENTED_EDGE('',*,*,#66,.T.); #66 = EDGE_CURVE('',#67,#69,#71,.T.); #67 = VERTEX_POINT('',#68);-#68 = CARTESIAN_POINT('',(-0.5,-0.4,0.47));+#68 = CARTESIAN_POINT('',(-0.5,-0.4,0.235)); #69 = VERTEX_POINT('',#70);-#70 = CARTESIAN_POINT('',(-0.45,-0.4,1.1));-#71 = SURFACE_CURVE('',#72,(#76,#88),.PCURVE_S1.);-#72 = LINE('',#73,#74);-#73 = CARTESIAN_POINT('',(-0.5,-0.4,0.47));-#74 = VECTOR('',#75,1.);-#75 = DIRECTION('',(7.91163009983E-02,0.,0.996865392576));-#76 = PCURVE('',#77,#82);-#77 = PLANE('',#78);-#78 = AXIS2_PLACEMENT_3D('',#79,#80,#81);-#79 = CARTESIAN_POINT('',(-8.772411109409E-18,-0.4,0.775044128294));-#80 = DIRECTION('',(0.,1.,0.));-#81 = DIRECTION('',(0.,-0.,1.));-#82 = DEFINITIONAL_REPRESENTATION('',(#83),#87);-#83 = LINE('',#84,#85);-#84 = CARTESIAN_POINT('',(-0.305044128294,-0.5));-#85 = VECTOR('',#86,1.);-#86 = DIRECTION('',(0.996865392576,7.91163009983E-02));-#87 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#88 = PCURVE('',#89,#94);-#89 = PLANE('',#90);-#90 = AXIS2_PLACEMENT_3D('',#91,#92,#93);-#91 = CARTESIAN_POINT('',(-0.5,0.4,0.47));-#92 = DIRECTION('',(-0.996865392576,0.,7.91163009983E-02));-#93 = DIRECTION('',(7.91163009983E-02,0.,0.996865392576));-#94 = DEFINITIONAL_REPRESENTATION('',(#95),#99);-#95 = LINE('',#96,#97);-#96 = CARTESIAN_POINT('',(0.,-0.8));-#97 = VECTOR('',#98,1.);-#98 = DIRECTION('',(1.,0.));-#99 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#100 = ORIENTED_EDGE('',*,*,#101,.T.);-#101 = EDGE_CURVE('',#69,#102,#104,.T.);-#102 = VERTEX_POINT('',#103);-#103 = CARTESIAN_POINT('',(0.45,-0.4,1.1));-#104 = SURFACE_CURVE('',#105,(#109,#116),.PCURVE_S1.);-#105 = LINE('',#106,#107);-#106 = CARTESIAN_POINT('',(-0.45,-0.4,1.1));-#107 = VECTOR('',#108,1.);-#108 = DIRECTION('',(1.,0.,0.));-#109 = PCURVE('',#77,#110);-#110 = DEFINITIONAL_REPRESENTATION('',(#111),#115);-#111 = LINE('',#112,#113);-#112 = CARTESIAN_POINT('',(0.324955871706,-0.45));-#113 = VECTOR('',#114,1.);-#114 = DIRECTION('',(0.,1.));-#115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#116 = PCURVE('',#117,#122);-#117 = PLANE('',#118);-#118 = AXIS2_PLACEMENT_3D('',#119,#120,#121);-#119 = CARTESIAN_POINT('',(-0.45,0.4,1.1));-#120 = DIRECTION('',(0.,0.,1.));-#121 = DIRECTION('',(1.,0.,-0.));-#122 = DEFINITIONAL_REPRESENTATION('',(#123),#127);-#123 = LINE('',#124,#125);-#124 = CARTESIAN_POINT('',(0.,-0.8));-#125 = VECTOR('',#126,1.);-#126 = DIRECTION('',(1.,0.));-#127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#128 = ORIENTED_EDGE('',*,*,#129,.T.);-#129 = EDGE_CURVE('',#102,#130,#132,.T.);-#130 = VERTEX_POINT('',#131);-#131 = CARTESIAN_POINT('',(0.5,-0.4,0.47));-#132 = SURFACE_CURVE('',#133,(#137,#144),.PCURVE_S1.);-#133 = LINE('',#134,#135);-#134 = CARTESIAN_POINT('',(0.45,-0.4,1.1));-#135 = VECTOR('',#136,1.);-#136 = DIRECTION('',(7.91163009983E-02,0.,-0.996865392576));-#137 = PCURVE('',#77,#138);-#138 = DEFINITIONAL_REPRESENTATION('',(#139),#143);-#139 = LINE('',#140,#141);-#140 = CARTESIAN_POINT('',(0.324955871706,0.45));-#141 = VECTOR('',#142,1.);-#142 = DIRECTION('',(-0.996865392576,7.91163009983E-02));-#143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#144 = PCURVE('',#145,#150);-#145 = PLANE('',#146);-#146 = AXIS2_PLACEMENT_3D('',#147,#148,#149);-#147 = CARTESIAN_POINT('',(0.45,0.4,1.1));-#148 = DIRECTION('',(0.996865392576,0.,7.91163009983E-02));-#149 = DIRECTION('',(7.91163009983E-02,0.,-0.996865392576));-#150 = DEFINITIONAL_REPRESENTATION('',(#151),#155);-#151 = LINE('',#152,#153);-#152 = CARTESIAN_POINT('',(0.,-0.8));-#153 = VECTOR('',#154,1.);-#154 = DIRECTION('',(1.,0.));-#155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#156 = ORIENTED_EDGE('',*,*,#157,.T.);-#157 = EDGE_CURVE('',#130,#67,#158,.T.);-#158 = SURFACE_CURVE('',#159,(#163,#170),.PCURVE_S1.);-#159 = LINE('',#160,#161);-#160 = CARTESIAN_POINT('',(0.5,-0.4,0.47));-#161 = VECTOR('',#162,1.);-#162 = DIRECTION('',(-1.,0.,0.));-#163 = PCURVE('',#77,#164);-#164 = DEFINITIONAL_REPRESENTATION('',(#165),#169);-#165 = LINE('',#166,#167);-#166 = CARTESIAN_POINT('',(-0.305044128294,0.5));-#167 = VECTOR('',#168,1.);-#168 = DIRECTION('',(0.,-1.));+#70 = CARTESIAN_POINT('',(-0.45,-0.4,0.55));+#71 = SURFACE_CURVE('',#72,(#75,#86),.PCURVE_S1.);+#72 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#73,#74),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#73 = CARTESIAN_POINT('',(-0.5,-0.4,0.235));+#74 = CARTESIAN_POINT('',(-0.45,-0.4,0.55));+#75 = PCURVE('',#76,#81);+#76 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#77,#78)+ ,(#79,#80+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-0.305044128294,+ 0.324955871706),(-0.5,0.5),.PIECEWISE_BEZIER_KNOTS.);+#77 = CARTESIAN_POINT('',(-0.5,-0.4,0.235));+#78 = CARTESIAN_POINT('',(0.5,-0.4,0.235));+#79 = CARTESIAN_POINT('',(-0.5,-0.4,0.55));+#80 = CARTESIAN_POINT('',(0.5,-0.4,0.55));+#81 = DEFINITIONAL_REPRESENTATION('',(#82),#85);+#82 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83,#84),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#83 = CARTESIAN_POINT('',(-0.305044128294,-0.5));+#84 = CARTESIAN_POINT('',(0.324955871706,-0.45));+#85 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#86 = PCURVE('',#87,#92);+#87 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#88,#89)+ ,(#90,#91+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.631981012373),(-0.8,+ 0.),.PIECEWISE_BEZIER_KNOTS.);+#88 = CARTESIAN_POINT('',(-0.5,-0.4,0.235));+#89 = CARTESIAN_POINT('',(-0.5,0.4,0.235));+#90 = CARTESIAN_POINT('',(-0.45,-0.4,0.55));+#91 = CARTESIAN_POINT('',(-0.45,0.4,0.55));+#92 = DEFINITIONAL_REPRESENTATION('',(#93),#96);+#93 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#94,#95),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#94 = CARTESIAN_POINT('',(0.,-0.8));+#95 = CARTESIAN_POINT('',(0.631981012373,-0.8));+#96 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#97 = ORIENTED_EDGE('',*,*,#98,.T.);+#98 = EDGE_CURVE('',#69,#99,#101,.T.);+#99 = VERTEX_POINT('',#100);+#100 = CARTESIAN_POINT('',(0.45,-0.4,0.55));+#101 = SURFACE_CURVE('',#102,(#105,#111),.PCURVE_S1.);+#102 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#103,#104),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.9),.PIECEWISE_BEZIER_KNOTS.);+#103 = CARTESIAN_POINT('',(-0.45,-0.4,0.55));+#104 = CARTESIAN_POINT('',(0.45,-0.4,0.55));+#105 = PCURVE('',#76,#106);+#106 = DEFINITIONAL_REPRESENTATION('',(#107),#110);+#107 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#108,#109),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.9),.PIECEWISE_BEZIER_KNOTS.);+#108 = CARTESIAN_POINT('',(0.324955871706,-0.45));+#109 = CARTESIAN_POINT('',(0.324955871706,0.45));+#110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#111 = PCURVE('',#112,#117);+#112 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#113,#114)+ ,(#115,#116+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.9),(-0.8,0.),+ .PIECEWISE_BEZIER_KNOTS.);+#113 = CARTESIAN_POINT('',(-0.45,-0.4,0.55));+#114 = CARTESIAN_POINT('',(-0.45,0.4,0.55));+#115 = CARTESIAN_POINT('',(0.45,-0.4,0.55));+#116 = CARTESIAN_POINT('',(0.45,0.4,0.55));+#117 = DEFINITIONAL_REPRESENTATION('',(#118),#121);+#118 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#119,#120),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.9),.PIECEWISE_BEZIER_KNOTS.);+#119 = CARTESIAN_POINT('',(0.,-0.8));+#120 = CARTESIAN_POINT('',(0.9,-0.8));+#121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#122 = ORIENTED_EDGE('',*,*,#123,.T.);+#123 = EDGE_CURVE('',#99,#124,#126,.T.);+#124 = VERTEX_POINT('',#125);+#125 = CARTESIAN_POINT('',(0.5,-0.4,0.235));+#126 = SURFACE_CURVE('',#127,(#130,#136),.PCURVE_S1.);+#127 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#128,#129),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#128 = CARTESIAN_POINT('',(0.45,-0.4,0.55));+#129 = CARTESIAN_POINT('',(0.5,-0.4,0.235));+#130 = PCURVE('',#76,#131);+#131 = DEFINITIONAL_REPRESENTATION('',(#132),#135);+#132 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#133,#134),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#133 = CARTESIAN_POINT('',(0.324955871706,0.45));+#134 = CARTESIAN_POINT('',(-0.305044128294,0.5));+#135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#136 = PCURVE('',#137,#142);+#137 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#138,#139)+ ,(#140,#141+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.631981012373),(-0.8,+ 0.),.PIECEWISE_BEZIER_KNOTS.);+#138 = CARTESIAN_POINT('',(0.45,-0.4,0.55));+#139 = CARTESIAN_POINT('',(0.45,0.4,0.55));+#140 = CARTESIAN_POINT('',(0.5,-0.4,0.235));+#141 = CARTESIAN_POINT('',(0.5,0.4,0.235));+#142 = DEFINITIONAL_REPRESENTATION('',(#143),#146);+#143 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#144,#145),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#144 = CARTESIAN_POINT('',(0.,-0.8));+#145 = CARTESIAN_POINT('',(0.631981012373,-0.8));+#146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#147 = ORIENTED_EDGE('',*,*,#148,.T.);+#148 = EDGE_CURVE('',#124,#67,#149,.T.);+#149 = SURFACE_CURVE('',#150,(#153,#159),.PCURVE_S1.);+#150 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#151,#152),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#151 = CARTESIAN_POINT('',(0.5,-0.4,0.235));+#152 = CARTESIAN_POINT('',(-0.5,-0.4,0.235));+#153 = PCURVE('',#76,#154);+#154 = DEFINITIONAL_REPRESENTATION('',(#155),#158);+#155 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156,#157),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#156 = CARTESIAN_POINT('',(-0.305044128294,0.5));+#157 = CARTESIAN_POINT('',(-0.305044128294,-0.5));+#158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#159 = PCURVE('',#160,#165);+#160 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#161,#162)+ ,(#163,#164+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.44),(0.,1.54),+ .PIECEWISE_BEZIER_KNOTS.);+#161 = CARTESIAN_POINT('',(-0.77,-0.4,1.5E-02));+#162 = CARTESIAN_POINT('',(0.77,-0.4,1.5E-02));+#163 = CARTESIAN_POINT('',(-0.77,-0.4,0.235));+#164 = CARTESIAN_POINT('',(0.77,-0.4,0.235));+#165 = DEFINITIONAL_REPRESENTATION('',(#166),#169);+#166 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#167,#168),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#167 = CARTESIAN_POINT('',(0.44,1.27));+#168 = CARTESIAN_POINT('',(0.44,0.27)); #169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#170 = PCURVE('',#171,#176);-#171 = PLANE('',#172);-#172 = AXIS2_PLACEMENT_3D('',#173,#174,#175);-#173 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02));-#174 = DIRECTION('',(0.,1.,0.));-#175 = DIRECTION('',(0.,-0.,1.));-#176 = DEFINITIONAL_REPRESENTATION('',(#177),#181);-#177 = LINE('',#178,#179);-#178 = CARTESIAN_POINT('',(0.44,1.27));-#179 = VECTOR('',#180,1.);-#180 = DIRECTION('',(0.,-1.));-#181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#182 = ADVANCED_FACE('',(#183),#89,.T.);-#183 = FACE_BOUND('',#184,.T.);-#184 = EDGE_LOOP('',(#185,#215,#243,#269,#270,#293));-#185 = ORIENTED_EDGE('',*,*,#186,.T.);-#186 = EDGE_CURVE('',#187,#189,#191,.T.);-#187 = VERTEX_POINT('',#188);-#188 = CARTESIAN_POINT('',(-0.5,0.4,0.47));-#189 = VERTEX_POINT('',#190);-#190 = CARTESIAN_POINT('',(-0.5,0.3,0.47));-#191 = SURFACE_CURVE('',#192,(#196,#203),.PCURVE_S1.);-#192 = LINE('',#193,#194);-#193 = CARTESIAN_POINT('',(-0.5,0.4,0.47));-#194 = VECTOR('',#195,1.);-#195 = DIRECTION('',(0.,-1.,0.));-#196 = PCURVE('',#89,#197);-#197 = DEFINITIONAL_REPRESENTATION('',(#198),#202);-#198 = LINE('',#199,#200);-#199 = CARTESIAN_POINT('',(0.,0.));-#200 = VECTOR('',#201,1.);-#201 = DIRECTION('',(0.,-1.));-#202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#203 = PCURVE('',#204,#209);-#204 = PLANE('',#205);-#205 = AXIS2_PLACEMENT_3D('',#206,#207,#208);-#206 = CARTESIAN_POINT('',(-0.77,-0.4,0.47));-#207 = DIRECTION('',(0.,0.,1.));-#208 = DIRECTION('',(1.,0.,-0.));-#209 = DEFINITIONAL_REPRESENTATION('',(#210),#214);-#210 = LINE('',#211,#212);-#211 = CARTESIAN_POINT('',(0.27,0.8));-#212 = VECTOR('',#213,1.);-#213 = DIRECTION('',(0.,-1.));-#214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#215 = ORIENTED_EDGE('',*,*,#216,.F.);-#216 = EDGE_CURVE('',#217,#189,#219,.T.);-#217 = VERTEX_POINT('',#218);-#218 = CARTESIAN_POINT('',(-0.5,-0.3,0.47));-#219 = SURFACE_CURVE('',#220,(#224,#231),.PCURVE_S1.);-#220 = LINE('',#221,#222);-#221 = CARTESIAN_POINT('',(-0.5,-0.4,0.47));-#222 = VECTOR('',#223,1.);-#223 = DIRECTION('',(0.,1.,0.));-#224 = PCURVE('',#89,#225);-#225 = DEFINITIONAL_REPRESENTATION('',(#226),#230);-#226 = LINE('',#227,#228);-#227 = CARTESIAN_POINT('',(0.,-0.8));-#228 = VECTOR('',#229,1.);-#229 = DIRECTION('',(0.,1.));-#230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#231 = PCURVE('',#232,#237);-#232 = CYLINDRICAL_SURFACE('',#233,3.E-02);-#233 = AXIS2_PLACEMENT_3D('',#234,#235,#236);-#234 = CARTESIAN_POINT('',(-0.53,-0.4,0.47));-#235 = DIRECTION('',(0.,1.,0.));-#236 = DIRECTION('',(1.,0.,0.));-#237 = DEFINITIONAL_REPRESENTATION('',(#238),#242);-#238 = LINE('',#239,#240);-#239 = CARTESIAN_POINT('',(6.28318530718,0.));-#240 = VECTOR('',#241,1.);-#241 = DIRECTION('',(0.,1.));-#242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#243 = ORIENTED_EDGE('',*,*,#244,.T.);-#244 = EDGE_CURVE('',#217,#67,#245,.T.);-#245 = SURFACE_CURVE('',#246,(#250,#257),.PCURVE_S1.);-#246 = LINE('',#247,#248);-#247 = CARTESIAN_POINT('',(-0.5,0.4,0.47));-#248 = VECTOR('',#249,1.);-#249 = DIRECTION('',(0.,-1.,0.));-#250 = PCURVE('',#89,#251);-#251 = DEFINITIONAL_REPRESENTATION('',(#252),#256);-#252 = LINE('',#253,#254);-#253 = CARTESIAN_POINT('',(0.,0.));-#254 = VECTOR('',#255,1.);-#255 = DIRECTION('',(0.,-1.));-#256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#257 = PCURVE('',#258,#263);-#258 = PLANE('',#259);-#259 = AXIS2_PLACEMENT_3D('',#260,#261,#262);-#260 = CARTESIAN_POINT('',(-0.77,-0.4,0.47));-#261 = DIRECTION('',(0.,0.,1.));-#262 = DIRECTION('',(1.,0.,-0.));-#263 = DEFINITIONAL_REPRESENTATION('',(#264),#268);-#264 = LINE('',#265,#266);-#265 = CARTESIAN_POINT('',(0.27,0.8));-#266 = VECTOR('',#267,1.);-#267 = DIRECTION('',(0.,-1.));-#268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#269 = ORIENTED_EDGE('',*,*,#66,.T.);-#270 = ORIENTED_EDGE('',*,*,#271,.F.);-#271 = EDGE_CURVE('',#272,#69,#274,.T.);-#272 = VERTEX_POINT('',#273);-#273 = CARTESIAN_POINT('',(-0.45,0.4,1.1));-#274 = SURFACE_CURVE('',#275,(#279,#286),.PCURVE_S1.);-#275 = LINE('',#276,#277);-#276 = CARTESIAN_POINT('',(-0.45,0.4,1.1));-#277 = VECTOR('',#278,1.);-#278 = DIRECTION('',(0.,-1.,0.));-#279 = PCURVE('',#89,#280);-#280 = DEFINITIONAL_REPRESENTATION('',(#281),#285);-#281 = LINE('',#282,#283);+#170 = ADVANCED_FACE('',(#171),#87,.T.);+#171 = FACE_BOUND('',#172,.T.);+#172 = EDGE_LOOP('',(#173,#200,#228,#251,#252,#272));+#173 = ORIENTED_EDGE('',*,*,#174,.T.);+#174 = EDGE_CURVE('',#175,#177,#179,.T.);+#175 = VERTEX_POINT('',#176);+#176 = CARTESIAN_POINT('',(-0.5,0.4,0.235));+#177 = VERTEX_POINT('',#178);+#178 = CARTESIAN_POINT('',(-0.5,0.3,0.235));+#179 = SURFACE_CURVE('',#180,(#183,#189),.PCURVE_S1.);+#180 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#181,#182),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.1),.PIECEWISE_BEZIER_KNOTS.);+#181 = CARTESIAN_POINT('',(-0.5,0.4,0.235));+#182 = CARTESIAN_POINT('',(-0.5,0.3,0.235));+#183 = PCURVE('',#87,#184);+#184 = DEFINITIONAL_REPRESENTATION('',(#185),#188);+#185 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#186,#187),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.1),.PIECEWISE_BEZIER_KNOTS.);+#186 = CARTESIAN_POINT('',(0.,0.));+#187 = CARTESIAN_POINT('',(0.,-0.1));+#188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#189 = PCURVE('',#190,#195);+#190 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#191,#192)+ ,(#193,#194+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(4.5E-02,0.27),(0.7,0.8),+ .PIECEWISE_BEZIER_KNOTS.);+#191 = CARTESIAN_POINT('',(-0.725,0.3,0.235));+#192 = CARTESIAN_POINT('',(-0.725,0.4,0.235));+#193 = CARTESIAN_POINT('',(-0.5,0.3,0.235));+#194 = CARTESIAN_POINT('',(-0.5,0.4,0.235));+#195 = DEFINITIONAL_REPRESENTATION('',(#196),#199);+#196 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#197,#198),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.1),.PIECEWISE_BEZIER_KNOTS.);+#197 = CARTESIAN_POINT('',(0.27,0.8));+#198 = CARTESIAN_POINT('',(0.27,0.7));+#199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#200 = ORIENTED_EDGE('',*,*,#201,.F.);+#201 = EDGE_CURVE('',#202,#177,#204,.T.);+#202 = VERTEX_POINT('',#203);+#203 = CARTESIAN_POINT('',(-0.5,-0.3,0.235));+#204 = SURFACE_CURVE('',#205,(#208,#214),.PCURVE_S1.);+#205 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#206,#207),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.1,0.7),.PIECEWISE_BEZIER_KNOTS.);+#206 = CARTESIAN_POINT('',(-0.5,-0.3,0.235));+#207 = CARTESIAN_POINT('',(-0.5,0.3,0.235));+#208 = PCURVE('',#87,#209);+#209 = DEFINITIONAL_REPRESENTATION('',(#210),#213);+#210 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#211,#212),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.1,0.7),.PIECEWISE_BEZIER_KNOTS.);+#211 = CARTESIAN_POINT('',(0.,-0.7));+#212 = CARTESIAN_POINT('',(0.,-0.1));+#213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#214 = PCURVE('',#215,#222);+#215 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#216,#217)+ ,(#218,#219)+,(#220,#221+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(4.712388980385,6.28318530718),(0.1,0.7),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#216 = CARTESIAN_POINT('',(-0.53,-0.3,0.25));+#217 = CARTESIAN_POINT('',(-0.53,0.3,0.25));+#218 = CARTESIAN_POINT('',(-0.5,-0.3,0.25));+#219 = CARTESIAN_POINT('',(-0.5,0.3,0.25));+#220 = CARTESIAN_POINT('',(-0.5,-0.3,0.235));+#221 = CARTESIAN_POINT('',(-0.5,0.3,0.235));+#222 = DEFINITIONAL_REPRESENTATION('',(#223),#227);+#223 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#224,#225,#226),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(0.1,0.7),.PIECEWISE_BEZIER_KNOTS.);+#224 = CARTESIAN_POINT('',(6.28318530718,0.1));+#225 = CARTESIAN_POINT('',(6.28318530718,0.4));+#226 = CARTESIAN_POINT('',(6.28318530718,0.7));+#227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#228 = ORIENTED_EDGE('',*,*,#229,.T.);+#229 = EDGE_CURVE('',#202,#67,#230,.T.);+#230 = SURFACE_CURVE('',#231,(#234,#240),.PCURVE_S1.);+#231 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#232,#233),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.7,0.8),.PIECEWISE_BEZIER_KNOTS.);+#232 = CARTESIAN_POINT('',(-0.5,-0.3,0.235));+#233 = CARTESIAN_POINT('',(-0.5,-0.4,0.235));+#234 = PCURVE('',#87,#235);+#235 = DEFINITIONAL_REPRESENTATION('',(#236),#239);+#236 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#237,#238),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.7,0.8),.PIECEWISE_BEZIER_KNOTS.);+#237 = CARTESIAN_POINT('',(0.,-0.7));+#238 = CARTESIAN_POINT('',(0.,-0.8));+#239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#240 = PCURVE('',#241,#246);+#241 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#242,#243)+ ,(#244,#245+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(4.5E-02,0.27),(0.,0.1),+ .PIECEWISE_BEZIER_KNOTS.);+#242 = CARTESIAN_POINT('',(-0.725,-0.4,0.235));+#243 = CARTESIAN_POINT('',(-0.725,-0.3,0.235));+#244 = CARTESIAN_POINT('',(-0.5,-0.4,0.235));+#245 = CARTESIAN_POINT('',(-0.5,-0.3,0.235));+#246 = DEFINITIONAL_REPRESENTATION('',(#247),#250);+#247 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#248,#249),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.7,0.8),.PIECEWISE_BEZIER_KNOTS.);+#248 = CARTESIAN_POINT('',(0.27,0.1));+#249 = CARTESIAN_POINT('',(0.27,0.));+#250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#251 = ORIENTED_EDGE('',*,*,#66,.T.);+#252 = ORIENTED_EDGE('',*,*,#253,.F.);+#253 = EDGE_CURVE('',#254,#69,#256,.T.);+#254 = VERTEX_POINT('',#255);+#255 = CARTESIAN_POINT('',(-0.45,0.4,0.55));+#256 = SURFACE_CURVE('',#257,(#260,#266),.PCURVE_S1.);+#257 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#258,#259),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.8),.PIECEWISE_BEZIER_KNOTS.);+#258 = CARTESIAN_POINT('',(-0.45,0.4,0.55));+#259 = CARTESIAN_POINT('',(-0.45,-0.4,0.55));+#260 = PCURVE('',#87,#261);+#261 = DEFINITIONAL_REPRESENTATION('',(#262),#265);+#262 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#263,#264),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.8),.PIECEWISE_BEZIER_KNOTS.);+#263 = CARTESIAN_POINT('',(0.631981012373,0.));+#264 = CARTESIAN_POINT('',(0.631981012373,-0.8));+#265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#266 = PCURVE('',#112,#267);+#267 = DEFINITIONAL_REPRESENTATION('',(#268),#271);+#268 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#269,#270),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.8),.PIECEWISE_BEZIER_KNOTS.);+#269 = CARTESIAN_POINT('',(0.,0.));+#270 = CARTESIAN_POINT('',(0.,-0.8));+#271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#272 = ORIENTED_EDGE('',*,*,#273,.F.);+#273 = EDGE_CURVE('',#175,#254,#274,.T.);+#274 = SURFACE_CURVE('',#275,(#278,#284),.PCURVE_S1.);+#275 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#276,#277),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#276 = CARTESIAN_POINT('',(-0.5,0.4,0.235));+#277 = CARTESIAN_POINT('',(-0.45,0.4,0.55));+#278 = PCURVE('',#87,#279);+#279 = DEFINITIONAL_REPRESENTATION('',(#280),#283);+#280 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#281,#282),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#281 = CARTESIAN_POINT('',(0.,0.)); #282 = CARTESIAN_POINT('',(0.631981012373,0.));-#283 = VECTOR('',#284,1.);-#284 = DIRECTION('',(0.,-1.));-#285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#286 = PCURVE('',#117,#287);-#287 = DEFINITIONAL_REPRESENTATION('',(#288),#292);-#288 = LINE('',#289,#290);-#289 = CARTESIAN_POINT('',(0.,0.));-#290 = VECTOR('',#291,1.);-#291 = DIRECTION('',(0.,-1.));-#292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#293 = ORIENTED_EDGE('',*,*,#294,.F.);-#294 = EDGE_CURVE('',#187,#272,#295,.T.);-#295 = SURFACE_CURVE('',#296,(#300,#307),.PCURVE_S1.);-#296 = LINE('',#297,#298);-#297 = CARTESIAN_POINT('',(-0.5,0.4,0.47));-#298 = VECTOR('',#299,1.);-#299 = DIRECTION('',(7.91163009983E-02,0.,0.996865392576));-#300 = PCURVE('',#89,#301);-#301 = DEFINITIONAL_REPRESENTATION('',(#302),#306);-#302 = LINE('',#303,#304);-#303 = CARTESIAN_POINT('',(0.,0.));-#304 = VECTOR('',#305,1.);-#305 = DIRECTION('',(1.,0.));-#306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#307 = PCURVE('',#308,#313);-#308 = PLANE('',#309);-#309 = AXIS2_PLACEMENT_3D('',#310,#311,#312);-#310 = CARTESIAN_POINT('',(-8.772411109409E-18,0.4,0.775044128294));-#311 = DIRECTION('',(0.,1.,0.));-#312 = DIRECTION('',(0.,-0.,1.));-#313 = DEFINITIONAL_REPRESENTATION('',(#314),#318);-#314 = LINE('',#315,#316);-#315 = CARTESIAN_POINT('',(-0.305044128294,-0.5));-#316 = VECTOR('',#317,1.);-#317 = DIRECTION('',(0.996865392576,7.91163009983E-02));-#318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#319 = ADVANCED_FACE('',(#320),#171,.F.);-#320 = FACE_BOUND('',#321,.F.);-#321 = EDGE_LOOP('',(#322,#352,#375,#398,#419,#420,#448,#476,#499,#522)- );-#322 = ORIENTED_EDGE('',*,*,#323,.F.);-#323 = EDGE_CURVE('',#324,#326,#328,.T.);-#324 = VERTEX_POINT('',#325);-#325 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02));-#326 = VERTEX_POINT('',#327);-#327 = CARTESIAN_POINT('',(-0.725,-0.4,3.E-02));-#328 = SURFACE_CURVE('',#329,(#333,#340),.PCURVE_S1.);-#329 = LINE('',#330,#331);-#330 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02));-#331 = VECTOR('',#332,1.);-#332 = DIRECTION('',(1.,0.,0.));-#333 = PCURVE('',#171,#334);-#334 = DEFINITIONAL_REPRESENTATION('',(#335),#339);-#335 = LINE('',#336,#337);+#283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#284 = PCURVE('',#285,#290);+#285 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#286,#287)+ ,(#288,#289+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-0.305044128294,+ 0.324955871706),(-0.5,0.5),.PIECEWISE_BEZIER_KNOTS.);+#286 = CARTESIAN_POINT('',(-0.5,0.4,0.235));+#287 = CARTESIAN_POINT('',(0.5,0.4,0.235));+#288 = CARTESIAN_POINT('',(-0.5,0.4,0.55));+#289 = CARTESIAN_POINT('',(0.5,0.4,0.55));+#290 = DEFINITIONAL_REPRESENTATION('',(#291),#294);+#291 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#292,#293),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#292 = CARTESIAN_POINT('',(-0.305044128294,-0.5));+#293 = CARTESIAN_POINT('',(0.324955871706,-0.45));+#294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#295 = ADVANCED_FACE('',(#296),#160,.F.);+#296 = FACE_BOUND('',#297,.F.);+#297 = EDGE_LOOP('',(#298,#325,#345,#365,#383,#384,#409,#434,#454,#474)+ );+#298 = ORIENTED_EDGE('',*,*,#299,.F.);+#299 = EDGE_CURVE('',#300,#302,#304,.T.);+#300 = VERTEX_POINT('',#301);+#301 = CARTESIAN_POINT('',(-0.77,-0.4,1.5E-02));+#302 = VERTEX_POINT('',#303);+#303 = CARTESIAN_POINT('',(-0.725,-0.4,1.5E-02));+#304 = SURFACE_CURVE('',#305,(#308,#314),.PCURVE_S1.);+#305 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#306,#307),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#306 = CARTESIAN_POINT('',(-0.77,-0.4,1.5E-02));+#307 = CARTESIAN_POINT('',(-0.725,-0.4,1.5E-02));+#308 = PCURVE('',#160,#309);+#309 = DEFINITIONAL_REPRESENTATION('',(#310),#313);+#310 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#311,#312),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#311 = CARTESIAN_POINT('',(0.,0.));+#312 = CARTESIAN_POINT('',(0.,4.5E-02));+#313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#314 = PCURVE('',#315,#320);+#315 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#316,#317)+ ,(#318,#319+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.5),(0.,7.5E-02),+ .PIECEWISE_BEZIER_KNOTS.);+#316 = CARTESIAN_POINT('',(-0.8,-0.4,0.));+#317 = CARTESIAN_POINT('',(-0.725,-0.4,0.));+#318 = CARTESIAN_POINT('',(-0.8,-0.4,0.25));+#319 = CARTESIAN_POINT('',(-0.725,-0.4,0.25));+#320 = DEFINITIONAL_REPRESENTATION('',(#321),#324);+#321 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#322,#323),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#322 = CARTESIAN_POINT('',(3.E-02,3.E-02));+#323 = CARTESIAN_POINT('',(3.E-02,7.5E-02));+#324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#325 = ORIENTED_EDGE('',*,*,#326,.T.);+#326 = EDGE_CURVE('',#300,#327,#329,.T.);+#327 = VERTEX_POINT('',#328);+#328 = CARTESIAN_POINT('',(-0.77,-0.4,0.235));+#329 = SURFACE_CURVE('',#330,(#333,#339),.PCURVE_S1.);+#330 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#331,#332),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.44),.PIECEWISE_BEZIER_KNOTS.);+#331 = CARTESIAN_POINT('',(-0.77,-0.4,1.5E-02));+#332 = CARTESIAN_POINT('',(-0.77,-0.4,0.235));+#333 = PCURVE('',#160,#334);+#334 = DEFINITIONAL_REPRESENTATION('',(#335),#338);+#335 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#336,#337),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.44),.PIECEWISE_BEZIER_KNOTS.); #336 = CARTESIAN_POINT('',(0.,0.));-#337 = VECTOR('',#338,1.);-#338 = DIRECTION('',(0.,1.));-#339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#340 = PCURVE('',#341,#346);-#341 = PLANE('',#342);-#342 = AXIS2_PLACEMENT_3D('',#343,#344,#345);-#343 = CARTESIAN_POINT('',(-0.8,-0.4,0.));-#344 = DIRECTION('',(0.,1.,0.));-#345 = DIRECTION('',(0.,-0.,1.));-#346 = DEFINITIONAL_REPRESENTATION('',(#347),#351);-#347 = LINE('',#348,#349);-#348 = CARTESIAN_POINT('',(3.E-02,3.E-02));-#349 = VECTOR('',#350,1.);-#350 = DIRECTION('',(0.,1.));-#351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#352 = ORIENTED_EDGE('',*,*,#353,.T.);-#353 = EDGE_CURVE('',#324,#354,#356,.T.);-#354 = VERTEX_POINT('',#355);-#355 = CARTESIAN_POINT('',(-0.77,-0.4,0.47));-#356 = SURFACE_CURVE('',#357,(#361,#368),.PCURVE_S1.);-#357 = LINE('',#358,#359);-#358 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02));-#359 = VECTOR('',#360,1.);-#360 = DIRECTION('',(0.,0.,1.));-#361 = PCURVE('',#171,#362);-#362 = DEFINITIONAL_REPRESENTATION('',(#363),#367);-#363 = LINE('',#364,#365);-#364 = CARTESIAN_POINT('',(0.,0.));-#365 = VECTOR('',#366,1.);-#366 = DIRECTION('',(1.,0.));-#367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#368 = PCURVE('',#341,#369);-#369 = DEFINITIONAL_REPRESENTATION('',(#370),#374);-#370 = LINE('',#371,#372);-#371 = CARTESIAN_POINT('',(3.E-02,3.E-02));-#372 = VECTOR('',#373,1.);-#373 = DIRECTION('',(1.,0.));-#374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#375 = ORIENTED_EDGE('',*,*,#376,.T.);-#376 = EDGE_CURVE('',#354,#377,#379,.T.);-#377 = VERTEX_POINT('',#378);-#378 = CARTESIAN_POINT('',(-0.725,-0.4,0.47));-#379 = SURFACE_CURVE('',#380,(#384,#391),.PCURVE_S1.);-#380 = LINE('',#381,#382);-#381 = CARTESIAN_POINT('',(-0.77,-0.4,0.47));-#382 = VECTOR('',#383,1.);-#383 = DIRECTION('',(1.,0.,0.));-#384 = PCURVE('',#171,#385);-#385 = DEFINITIONAL_REPRESENTATION('',(#386),#390);-#386 = LINE('',#387,#388);-#387 = CARTESIAN_POINT('',(0.44,0.));-#388 = VECTOR('',#389,1.);-#389 = DIRECTION('',(0.,1.));-#390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#391 = PCURVE('',#341,#392);-#392 = DEFINITIONAL_REPRESENTATION('',(#393),#397);-#393 = LINE('',#394,#395);-#394 = CARTESIAN_POINT('',(0.47,3.E-02));-#395 = VECTOR('',#396,1.);-#396 = DIRECTION('',(0.,1.));+#337 = CARTESIAN_POINT('',(0.44,0.));+#338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#339 = PCURVE('',#315,#340);+#340 = DEFINITIONAL_REPRESENTATION('',(#341),#344);+#341 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#342,#343),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.44),.PIECEWISE_BEZIER_KNOTS.);+#342 = CARTESIAN_POINT('',(3.E-02,3.E-02));+#343 = CARTESIAN_POINT('',(0.47,3.E-02));+#344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#345 = ORIENTED_EDGE('',*,*,#346,.T.);+#346 = EDGE_CURVE('',#327,#347,#349,.T.);+#347 = VERTEX_POINT('',#348);+#348 = CARTESIAN_POINT('',(-0.725,-0.4,0.235));+#349 = SURFACE_CURVE('',#350,(#353,#359),.PCURVE_S1.);+#350 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#351,#352),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#351 = CARTESIAN_POINT('',(-0.77,-0.4,0.235));+#352 = CARTESIAN_POINT('',(-0.725,-0.4,0.235));+#353 = PCURVE('',#160,#354);+#354 = DEFINITIONAL_REPRESENTATION('',(#355),#358);+#355 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#356,#357),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#356 = CARTESIAN_POINT('',(0.44,0.));+#357 = CARTESIAN_POINT('',(0.44,4.5E-02));+#358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#359 = PCURVE('',#315,#360);+#360 = DEFINITIONAL_REPRESENTATION('',(#361),#364);+#361 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#362,#363),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.5E-02),.PIECEWISE_BEZIER_KNOTS.);+#362 = CARTESIAN_POINT('',(0.47,3.E-02));+#363 = CARTESIAN_POINT('',(0.47,7.5E-02));+#364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#365 = ORIENTED_EDGE('',*,*,#366,.T.);+#366 = EDGE_CURVE('',#347,#67,#367,.T.);+#367 = SURFACE_CURVE('',#368,(#371,#377),.PCURVE_S1.);+#368 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#369,#370),.UNSPECIFIED.,.F.,.F.,+ (2,2),(4.5E-02,0.27),.PIECEWISE_BEZIER_KNOTS.);+#369 = CARTESIAN_POINT('',(-0.725,-0.4,0.235));+#370 = CARTESIAN_POINT('',(-0.5,-0.4,0.235));+#371 = PCURVE('',#160,#372);+#372 = DEFINITIONAL_REPRESENTATION('',(#373),#376);+#373 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#374,#375),.UNSPECIFIED.,.F.,.F.,+ (2,2),(4.5E-02,0.27),.PIECEWISE_BEZIER_KNOTS.);+#374 = CARTESIAN_POINT('',(0.44,4.5E-02));+#375 = CARTESIAN_POINT('',(0.44,0.27));+#376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#377 = PCURVE('',#241,#378);+#378 = DEFINITIONAL_REPRESENTATION('',(#379),#382);+#379 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#380,#381),.UNSPECIFIED.,.F.,.F.,+ (2,2),(4.5E-02,0.27),.PIECEWISE_BEZIER_KNOTS.);+#380 = CARTESIAN_POINT('',(4.5E-02,0.));+#381 = CARTESIAN_POINT('',(0.27,0.));+#382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#383 = ORIENTED_EDGE('',*,*,#148,.F.);+#384 = ORIENTED_EDGE('',*,*,#385,.T.);+#385 = EDGE_CURVE('',#124,#386,#388,.T.);+#386 = VERTEX_POINT('',#387);+#387 = CARTESIAN_POINT('',(0.725,-0.4,0.235));+#388 = SURFACE_CURVE('',#389,(#392,#398),.PCURVE_S1.);+#389 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#390,#391),.UNSPECIFIED.,.F.,.F.,+ (2,2),(1.27,1.495),.PIECEWISE_BEZIER_KNOTS.);+#390 = CARTESIAN_POINT('',(0.5,-0.4,0.235));+#391 = CARTESIAN_POINT('',(0.725,-0.4,0.235));+#392 = PCURVE('',#160,#393);+#393 = DEFINITIONAL_REPRESENTATION('',(#394),#397);+#394 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#395,#396),.UNSPECIFIED.,.F.,.F.,+ (2,2),(1.27,1.495),.PIECEWISE_BEZIER_KNOTS.);+#395 = CARTESIAN_POINT('',(0.44,1.27));+#396 = CARTESIAN_POINT('',(0.44,1.495)); #397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#398 = ORIENTED_EDGE('',*,*,#399,.T.);-#399 = EDGE_CURVE('',#377,#67,#400,.T.);-#400 = SURFACE_CURVE('',#401,(#405,#412),.PCURVE_S1.);-#401 = LINE('',#402,#403);-#402 = CARTESIAN_POINT('',(-0.77,-0.4,0.47));-#403 = VECTOR('',#404,1.);-#404 = DIRECTION('',(1.,0.,0.));-#405 = PCURVE('',#171,#406);-#406 = DEFINITIONAL_REPRESENTATION('',(#407),#411);-#407 = LINE('',#408,#409);-#408 = CARTESIAN_POINT('',(0.44,0.));-#409 = VECTOR('',#410,1.);-#410 = DIRECTION('',(0.,1.));-#411 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#412 = PCURVE('',#258,#413);-#413 = DEFINITIONAL_REPRESENTATION('',(#414),#418);-#414 = LINE('',#415,#416);-#415 = CARTESIAN_POINT('',(0.,0.));-#416 = VECTOR('',#417,1.);-#417 = DIRECTION('',(1.,0.));-#418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#419 = ORIENTED_EDGE('',*,*,#157,.F.);-#420 = ORIENTED_EDGE('',*,*,#421,.T.);-#421 = EDGE_CURVE('',#130,#422,#424,.T.);-#422 = VERTEX_POINT('',#423);-#423 = CARTESIAN_POINT('',(0.725,-0.4,0.47));-#424 = SURFACE_CURVE('',#425,(#429,#436),.PCURVE_S1.);-#425 = LINE('',#426,#427);-#426 = CARTESIAN_POINT('',(-0.77,-0.4,0.47));-#427 = VECTOR('',#428,1.);-#428 = DIRECTION('',(1.,0.,0.));-#429 = PCURVE('',#171,#430);-#430 = DEFINITIONAL_REPRESENTATION('',(#431),#435);-#431 = LINE('',#432,#433);-#432 = CARTESIAN_POINT('',(0.44,0.));-#433 = VECTOR('',#434,1.);-#434 = DIRECTION('',(0.,1.));-#435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#436 = PCURVE('',#437,#442);-#437 = PLANE('',#438);-#438 = AXIS2_PLACEMENT_3D('',#439,#440,#441);-#439 = CARTESIAN_POINT('',(-0.77,-0.4,0.47));-#440 = DIRECTION('',(0.,0.,1.));-#441 = DIRECTION('',(1.,0.,-0.));-#442 = DEFINITIONAL_REPRESENTATION('',(#443),#447);-#443 = LINE('',#444,#445);-#444 = CARTESIAN_POINT('',(0.,0.));-#445 = VECTOR('',#446,1.);-#446 = DIRECTION('',(1.,0.));+#398 = PCURVE('',#399,#404);+#399 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#400,#401)+ ,(#402,#403+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(1.27,1.495),(0.,0.1),+ .PIECEWISE_BEZIER_KNOTS.);+#400 = CARTESIAN_POINT('',(0.5,-0.4,0.235));+#401 = CARTESIAN_POINT('',(0.5,-0.3,0.235));+#402 = CARTESIAN_POINT('',(0.725,-0.4,0.235));+#403 = CARTESIAN_POINT('',(0.725,-0.3,0.235));+#404 = DEFINITIONAL_REPRESENTATION('',(#405),#408);+#405 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#406,#407),.UNSPECIFIED.,.F.,.F.,+ (2,2),(1.27,1.495),.PIECEWISE_BEZIER_KNOTS.);+#406 = CARTESIAN_POINT('',(1.27,0.));+#407 = CARTESIAN_POINT('',(1.495,0.));+#408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#409 = ORIENTED_EDGE('',*,*,#410,.T.);+#410 = EDGE_CURVE('',#386,#411,#413,.T.);+#411 = VERTEX_POINT('',#412);+#412 = CARTESIAN_POINT('',(0.77,-0.4,0.235));+#413 = SURFACE_CURVE('',#414,(#417,#423),.PCURVE_S1.);+#414 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#415,#416),.UNSPECIFIED.,.F.,.F.,+ (2,2),(1.495,1.54),.PIECEWISE_BEZIER_KNOTS.);+#415 = CARTESIAN_POINT('',(0.725,-0.4,0.235));+#416 = CARTESIAN_POINT('',(0.77,-0.4,0.235));+#417 = PCURVE('',#160,#418);+#418 = DEFINITIONAL_REPRESENTATION('',(#419),#422);+#419 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#420,#421),.UNSPECIFIED.,.F.,.F.,+ (2,2),(1.495,1.54),.PIECEWISE_BEZIER_KNOTS.);+#420 = CARTESIAN_POINT('',(0.44,1.495));+#421 = CARTESIAN_POINT('',(0.44,1.54));+#422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#423 = PCURVE('',#424,#429);+#424 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#425,#426)+ ,(#427,#428+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.5),(0.225,0.3),+ .PIECEWISE_BEZIER_KNOTS.);+#425 = CARTESIAN_POINT('',(0.725,-0.4,0.));+#426 = CARTESIAN_POINT('',(0.8,-0.4,0.));+#427 = CARTESIAN_POINT('',(0.725,-0.4,0.25));+#428 = CARTESIAN_POINT('',(0.8,-0.4,0.25));+#429 = DEFINITIONAL_REPRESENTATION('',(#430),#433);+#430 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#431,#432),.UNSPECIFIED.,.F.,.F.,+ (2,2),(1.495,1.54),.PIECEWISE_BEZIER_KNOTS.);+#431 = CARTESIAN_POINT('',(0.47,0.225));+#432 = CARTESIAN_POINT('',(0.47,0.27));+#433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#434 = ORIENTED_EDGE('',*,*,#435,.F.);+#435 = EDGE_CURVE('',#436,#411,#438,.T.);+#436 = VERTEX_POINT('',#437);+#437 = CARTESIAN_POINT('',(0.77,-0.4,1.5E-02));+#438 = SURFACE_CURVE('',#439,(#442,#448),.PCURVE_S1.);+#439 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#440,#441),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.44),.PIECEWISE_BEZIER_KNOTS.);+#440 = CARTESIAN_POINT('',(0.77,-0.4,1.5E-02));+#441 = CARTESIAN_POINT('',(0.77,-0.4,0.235));+#442 = PCURVE('',#160,#443);+#443 = DEFINITIONAL_REPRESENTATION('',(#444),#447);+#444 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#445,#446),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.44),.PIECEWISE_BEZIER_KNOTS.);+#445 = CARTESIAN_POINT('',(0.,1.54));+#446 = CARTESIAN_POINT('',(0.44,1.54)); #447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#448 = ORIENTED_EDGE('',*,*,#449,.T.);-#449 = EDGE_CURVE('',#422,#450,#452,.T.);-#450 = VERTEX_POINT('',#451);-#451 = CARTESIAN_POINT('',(0.77,-0.4,0.47));-#452 = SURFACE_CURVE('',#453,(#457,#464),.PCURVE_S1.);-#453 = LINE('',#454,#455);-#454 = CARTESIAN_POINT('',(-0.77,-0.4,0.47));-#455 = VECTOR('',#456,1.);-#456 = DIRECTION('',(1.,0.,0.));-#457 = PCURVE('',#171,#458);-#458 = DEFINITIONAL_REPRESENTATION('',(#459),#463);-#459 = LINE('',#460,#461);-#460 = CARTESIAN_POINT('',(0.44,0.));-#461 = VECTOR('',#462,1.);-#462 = DIRECTION('',(0.,1.));-#463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#464 = PCURVE('',#465,#470);-#465 = PLANE('',#466);-#466 = AXIS2_PLACEMENT_3D('',#467,#468,#469);-#467 = CARTESIAN_POINT('',(0.5,-0.4,0.));-#468 = DIRECTION('',(0.,1.,0.));-#469 = DIRECTION('',(0.,-0.,1.));-#470 = DEFINITIONAL_REPRESENTATION('',(#471),#475);-#471 = LINE('',#472,#473);-#472 = CARTESIAN_POINT('',(0.47,-1.27));-#473 = VECTOR('',#474,1.);-#474 = DIRECTION('',(0.,1.));-#475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#476 = ORIENTED_EDGE('',*,*,#477,.F.);-#477 = EDGE_CURVE('',#478,#450,#480,.T.);-#478 = VERTEX_POINT('',#479);-#479 = CARTESIAN_POINT('',(0.77,-0.4,3.E-02));-#480 = SURFACE_CURVE('',#481,(#485,#492),.PCURVE_S1.);-#481 = LINE('',#482,#483);-#482 = CARTESIAN_POINT('',(0.77,-0.4,3.E-02));-#483 = VECTOR('',#484,1.);-#484 = DIRECTION('',(0.,0.,1.));-#485 = PCURVE('',#171,#486);-#486 = DEFINITIONAL_REPRESENTATION('',(#487),#491);-#487 = LINE('',#488,#489);-#488 = CARTESIAN_POINT('',(0.,1.54));-#489 = VECTOR('',#490,1.);-#490 = DIRECTION('',(1.,0.));-#491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#492 = PCURVE('',#465,#493);-#493 = DEFINITIONAL_REPRESENTATION('',(#494),#498);-#494 = LINE('',#495,#496);-#495 = CARTESIAN_POINT('',(3.E-02,0.27));-#496 = VECTOR('',#497,1.);-#497 = DIRECTION('',(1.,0.));-#498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#499 = ORIENTED_EDGE('',*,*,#500,.F.);-#500 = EDGE_CURVE('',#501,#478,#503,.T.);-#501 = VERTEX_POINT('',#502);-#502 = CARTESIAN_POINT('',(0.725,-0.4,3.E-02));-#503 = SURFACE_CURVE('',#504,(#508,#515),.PCURVE_S1.);-#504 = LINE('',#505,#506);-#505 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02));-#506 = VECTOR('',#507,1.);-#507 = DIRECTION('',(1.,0.,0.));-#508 = PCURVE('',#171,#509);-#509 = DEFINITIONAL_REPRESENTATION('',(#510),#514);-#510 = LINE('',#511,#512);-#511 = CARTESIAN_POINT('',(0.,0.));-#512 = VECTOR('',#513,1.);-#513 = DIRECTION('',(0.,1.));-#514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#515 = PCURVE('',#465,#516);-#516 = DEFINITIONAL_REPRESENTATION('',(#517),#521);-#517 = LINE('',#518,#519);-#518 = CARTESIAN_POINT('',(3.E-02,-1.27));-#519 = VECTOR('',#520,1.);-#520 = DIRECTION('',(0.,1.));+#448 = PCURVE('',#424,#449);+#449 = DEFINITIONAL_REPRESENTATION('',(#450),#453);+#450 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#451,#452),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.44),.PIECEWISE_BEZIER_KNOTS.);+#451 = CARTESIAN_POINT('',(3.E-02,0.27));+#452 = CARTESIAN_POINT('',(0.47,0.27));+#453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#454 = ORIENTED_EDGE('',*,*,#455,.F.);+#455 = EDGE_CURVE('',#456,#436,#458,.T.);+#456 = VERTEX_POINT('',#457);+#457 = CARTESIAN_POINT('',(0.725,-0.4,1.5E-02));+#458 = SURFACE_CURVE('',#459,(#462,#468),.PCURVE_S1.);+#459 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#460,#461),.UNSPECIFIED.,.F.,.F.,+ (2,2),(1.495,1.54),.PIECEWISE_BEZIER_KNOTS.);+#460 = CARTESIAN_POINT('',(0.725,-0.4,1.5E-02));+#461 = CARTESIAN_POINT('',(0.77,-0.4,1.5E-02));+#462 = PCURVE('',#160,#463);+#463 = DEFINITIONAL_REPRESENTATION('',(#464),#467);+#464 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#465,#466),.UNSPECIFIED.,.F.,.F.,+ (2,2),(1.495,1.54),.PIECEWISE_BEZIER_KNOTS.);+#465 = CARTESIAN_POINT('',(0.,1.495));+#466 = CARTESIAN_POINT('',(0.,1.54));+#467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#468 = PCURVE('',#424,#469);+#469 = DEFINITIONAL_REPRESENTATION('',(#470),#473);+#470 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#471,#472),.UNSPECIFIED.,.F.,.F.,+ (2,2),(1.495,1.54),.PIECEWISE_BEZIER_KNOTS.);+#471 = CARTESIAN_POINT('',(3.E-02,0.225));+#472 = CARTESIAN_POINT('',(3.E-02,0.27));+#473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#474 = ORIENTED_EDGE('',*,*,#475,.F.);+#475 = EDGE_CURVE('',#302,#456,#476,.T.);+#476 = SURFACE_CURVE('',#477,(#480,#486),.PCURVE_S1.);+#477 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#478,#479),.UNSPECIFIED.,.F.,.F.,+ (2,2),(4.5E-02,1.495),.PIECEWISE_BEZIER_KNOTS.);+#478 = CARTESIAN_POINT('',(-0.725,-0.4,1.5E-02));+#479 = CARTESIAN_POINT('',(0.725,-0.4,1.5E-02));+#480 = PCURVE('',#160,#481);+#481 = DEFINITIONAL_REPRESENTATION('',(#482),#485);+#482 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#483,#484),.UNSPECIFIED.,.F.,.F.,+ (2,2),(4.5E-02,1.495),.PIECEWISE_BEZIER_KNOTS.);+#483 = CARTESIAN_POINT('',(0.,4.5E-02));+#484 = CARTESIAN_POINT('',(0.,1.495));+#485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#486 = PCURVE('',#487,#492);+#487 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#488,#489)+ ,(#490,#491+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(4.5E-02,1.495),(0.,0.8),+ .PIECEWISE_BEZIER_KNOTS.);+#488 = CARTESIAN_POINT('',(-0.725,-0.4,1.5E-02));+#489 = CARTESIAN_POINT('',(-0.725,0.4,1.5E-02));+#490 = CARTESIAN_POINT('',(0.725,-0.4,1.5E-02));+#491 = CARTESIAN_POINT('',(0.725,0.4,1.5E-02));+#492 = DEFINITIONAL_REPRESENTATION('',(#493),#496);+#493 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#494,#495),.UNSPECIFIED.,.F.,.F.,+ (2,2),(4.5E-02,1.495),.PIECEWISE_BEZIER_KNOTS.);+#494 = CARTESIAN_POINT('',(4.5E-02,0.));+#495 = CARTESIAN_POINT('',(1.495,0.));+#496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#497 = ADVANCED_FACE('',(#498),#112,.T.);+#498 = FACE_BOUND('',#499,.T.);+#499 = EDGE_LOOP('',(#500,#501,#502,#522));+#500 = ORIENTED_EDGE('',*,*,#253,.T.);+#501 = ORIENTED_EDGE('',*,*,#98,.T.);+#502 = ORIENTED_EDGE('',*,*,#503,.F.);+#503 = EDGE_CURVE('',#504,#99,#506,.T.);+#504 = VERTEX_POINT('',#505);+#505 = CARTESIAN_POINT('',(0.45,0.4,0.55));+#506 = SURFACE_CURVE('',#507,(#510,#516),.PCURVE_S1.);+#507 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#508,#509),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.8),.PIECEWISE_BEZIER_KNOTS.);+#508 = CARTESIAN_POINT('',(0.45,0.4,0.55));+#509 = CARTESIAN_POINT('',(0.45,-0.4,0.55));+#510 = PCURVE('',#112,#511);+#511 = DEFINITIONAL_REPRESENTATION('',(#512),#515);+#512 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#513,#514),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.8),.PIECEWISE_BEZIER_KNOTS.);+#513 = CARTESIAN_POINT('',(0.9,0.));+#514 = CARTESIAN_POINT('',(0.9,-0.8));+#515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#516 = PCURVE('',#137,#517);+#517 = DEFINITIONAL_REPRESENTATION('',(#518),#521);+#518 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#519,#520),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.8),.PIECEWISE_BEZIER_KNOTS.);+#519 = CARTESIAN_POINT('',(0.,0.));+#520 = CARTESIAN_POINT('',(0.,-0.8)); #521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #522 = ORIENTED_EDGE('',*,*,#523,.F.);-#523 = EDGE_CURVE('',#326,#501,#524,.T.);-#524 = SURFACE_CURVE('',#525,(#529,#536),.PCURVE_S1.);-#525 = LINE('',#526,#527);-#526 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02));-#527 = VECTOR('',#528,1.);-#528 = DIRECTION('',(1.,0.,0.));-#529 = PCURVE('',#171,#530);-#530 = DEFINITIONAL_REPRESENTATION('',(#531),#535);-#531 = LINE('',#532,#533);-#532 = CARTESIAN_POINT('',(0.,0.));-#533 = VECTOR('',#534,1.);-#534 = DIRECTION('',(0.,1.));-#535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#536 = PCURVE('',#537,#542);-#537 = PLANE('',#538);-#538 = AXIS2_PLACEMENT_3D('',#539,#540,#541);-#539 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02));-#540 = DIRECTION('',(0.,0.,1.));-#541 = DIRECTION('',(1.,0.,-0.));-#542 = DEFINITIONAL_REPRESENTATION('',(#543),#547);-#543 = LINE('',#544,#545);-#544 = CARTESIAN_POINT('',(0.,0.));-#545 = VECTOR('',#546,1.);-#546 = DIRECTION('',(1.,0.));-#547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#548 = ADVANCED_FACE('',(#549),#117,.T.);-#549 = FACE_BOUND('',#550,.T.);-#550 = EDGE_LOOP('',(#551,#552,#553,#576));-#551 = ORIENTED_EDGE('',*,*,#271,.T.);-#552 = ORIENTED_EDGE('',*,*,#101,.T.);-#553 = ORIENTED_EDGE('',*,*,#554,.F.);-#554 = EDGE_CURVE('',#555,#102,#557,.T.);-#555 = VERTEX_POINT('',#556);-#556 = CARTESIAN_POINT('',(0.45,0.4,1.1));-#557 = SURFACE_CURVE('',#558,(#562,#569),.PCURVE_S1.);-#558 = LINE('',#559,#560);-#559 = CARTESIAN_POINT('',(0.45,0.4,1.1));-#560 = VECTOR('',#561,1.);-#561 = DIRECTION('',(0.,-1.,0.));-#562 = PCURVE('',#117,#563);-#563 = DEFINITIONAL_REPRESENTATION('',(#564),#568);-#564 = LINE('',#565,#566);-#565 = CARTESIAN_POINT('',(0.9,0.));-#566 = VECTOR('',#567,1.);-#567 = DIRECTION('',(0.,-1.));-#568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#569 = PCURVE('',#145,#570);-#570 = DEFINITIONAL_REPRESENTATION('',(#571),#575);-#571 = LINE('',#572,#573);-#572 = CARTESIAN_POINT('',(0.,0.));-#573 = VECTOR('',#574,1.);-#574 = DIRECTION('',(0.,-1.));-#575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#576 = ORIENTED_EDGE('',*,*,#577,.F.);-#577 = EDGE_CURVE('',#272,#555,#578,.T.);-#578 = SURFACE_CURVE('',#579,(#583,#590),.PCURVE_S1.);-#579 = LINE('',#580,#581);-#580 = CARTESIAN_POINT('',(-0.45,0.4,1.1));-#581 = VECTOR('',#582,1.);-#582 = DIRECTION('',(1.,0.,0.));-#583 = PCURVE('',#117,#584);-#584 = DEFINITIONAL_REPRESENTATION('',(#585),#589);-#585 = LINE('',#586,#587);-#586 = CARTESIAN_POINT('',(0.,0.));-#587 = VECTOR('',#588,1.);-#588 = DIRECTION('',(1.,0.));-#589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#590 = PCURVE('',#308,#591);-#591 = DEFINITIONAL_REPRESENTATION('',(#592),#596);-#592 = LINE('',#593,#594);-#593 = CARTESIAN_POINT('',(0.324955871706,-0.45));-#594 = VECTOR('',#595,1.);-#595 = DIRECTION('',(0.,1.));-#596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#597 = ADVANCED_FACE('',(#598),#145,.T.);-#598 = FACE_BOUND('',#599,.T.);-#599 = EDGE_LOOP('',(#600,#601,#602,#625,#653,#681));-#600 = ORIENTED_EDGE('',*,*,#554,.T.);-#601 = ORIENTED_EDGE('',*,*,#129,.T.);-#602 = ORIENTED_EDGE('',*,*,#603,.F.);-#603 = EDGE_CURVE('',#604,#130,#606,.T.);-#604 = VERTEX_POINT('',#605);-#605 = CARTESIAN_POINT('',(0.5,-0.3,0.47));-#606 = SURFACE_CURVE('',#607,(#611,#618),.PCURVE_S1.);-#607 = LINE('',#608,#609);-#608 = CARTESIAN_POINT('',(0.5,0.4,0.47));-#609 = VECTOR('',#610,1.);-#610 = DIRECTION('',(0.,-1.,0.));-#611 = PCURVE('',#145,#612);-#612 = DEFINITIONAL_REPRESENTATION('',(#613),#617);-#613 = LINE('',#614,#615);-#614 = CARTESIAN_POINT('',(0.631981012373,0.));-#615 = VECTOR('',#616,1.);-#616 = DIRECTION('',(0.,-1.));+#523 = EDGE_CURVE('',#254,#504,#524,.T.);+#524 = SURFACE_CURVE('',#525,(#528,#534),.PCURVE_S1.);+#525 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#526,#527),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.9),.PIECEWISE_BEZIER_KNOTS.);+#526 = CARTESIAN_POINT('',(-0.45,0.4,0.55));+#527 = CARTESIAN_POINT('',(0.45,0.4,0.55));+#528 = PCURVE('',#112,#529);+#529 = DEFINITIONAL_REPRESENTATION('',(#530),#533);+#530 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#531,#532),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.9),.PIECEWISE_BEZIER_KNOTS.);+#531 = CARTESIAN_POINT('',(0.,0.));+#532 = CARTESIAN_POINT('',(0.9,0.));+#533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#534 = PCURVE('',#285,#535);+#535 = DEFINITIONAL_REPRESENTATION('',(#536),#539);+#536 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#537,#538),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.9),.PIECEWISE_BEZIER_KNOTS.);+#537 = CARTESIAN_POINT('',(0.324955871706,-0.45));+#538 = CARTESIAN_POINT('',(0.324955871706,0.45));+#539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#540 = ADVANCED_FACE('',(#541),#137,.T.);+#541 = FACE_BOUND('',#542,.T.);+#542 = EDGE_LOOP('',(#543,#544,#545,#565,#593,#618));+#543 = ORIENTED_EDGE('',*,*,#503,.T.);+#544 = ORIENTED_EDGE('',*,*,#123,.T.);+#545 = ORIENTED_EDGE('',*,*,#546,.F.);+#546 = EDGE_CURVE('',#547,#124,#549,.T.);+#547 = VERTEX_POINT('',#548);+#548 = CARTESIAN_POINT('',(0.5,-0.3,0.235));+#549 = SURFACE_CURVE('',#550,(#553,#559),.PCURVE_S1.);+#550 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#551,#552),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.7,0.8),.PIECEWISE_BEZIER_KNOTS.);+#551 = CARTESIAN_POINT('',(0.5,-0.3,0.235));+#552 = CARTESIAN_POINT('',(0.5,-0.4,0.235));+#553 = PCURVE('',#137,#554);+#554 = DEFINITIONAL_REPRESENTATION('',(#555),#558);+#555 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#556,#557),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.7,0.8),.PIECEWISE_BEZIER_KNOTS.);+#556 = CARTESIAN_POINT('',(0.631981012373,-0.7));+#557 = CARTESIAN_POINT('',(0.631981012373,-0.8));+#558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#559 = PCURVE('',#399,#560);+#560 = DEFINITIONAL_REPRESENTATION('',(#561),#564);+#561 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#562,#563),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.7,0.8),.PIECEWISE_BEZIER_KNOTS.);+#562 = CARTESIAN_POINT('',(1.27,0.1));+#563 = CARTESIAN_POINT('',(1.27,0.));+#564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#565 = ORIENTED_EDGE('',*,*,#566,.T.);+#566 = EDGE_CURVE('',#547,#567,#569,.T.);+#567 = VERTEX_POINT('',#568);+#568 = CARTESIAN_POINT('',(0.5,0.3,0.235));+#569 = SURFACE_CURVE('',#570,(#573,#579),.PCURVE_S1.);+#570 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#571,#572),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.1,0.7),.PIECEWISE_BEZIER_KNOTS.);+#571 = CARTESIAN_POINT('',(0.5,-0.3,0.235));+#572 = CARTESIAN_POINT('',(0.5,0.3,0.235));+#573 = PCURVE('',#137,#574);+#574 = DEFINITIONAL_REPRESENTATION('',(#575),#578);+#575 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#576,#577),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.1,0.7),.PIECEWISE_BEZIER_KNOTS.);+#576 = CARTESIAN_POINT('',(0.631981012373,-0.7));+#577 = CARTESIAN_POINT('',(0.631981012373,-0.1));+#578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#579 = PCURVE('',#580,#587);+#580 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,1,(+ (#581,#582)+ ,(#583,#584)+,(#585,#586+ )),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(2,2+ ),(0.,1.570796326795),(0.1,0.7),.PIECEWISE_BEZIER_KNOTS.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE((+ (1.,1.)+ ,(0.707106781187,0.707106781187)+,(1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#581 = CARTESIAN_POINT('',(0.5,-0.3,0.235));+#582 = CARTESIAN_POINT('',(0.5,0.3,0.235));+#583 = CARTESIAN_POINT('',(0.5,-0.3,0.25));+#584 = CARTESIAN_POINT('',(0.5,0.3,0.25));+#585 = CARTESIAN_POINT('',(0.53,-0.3,0.25));+#586 = CARTESIAN_POINT('',(0.53,0.3,0.25));+#587 = DEFINITIONAL_REPRESENTATION('',(#588),#592);+#588 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#589,#590,#591),.UNSPECIFIED.,.F.+ ,.F.,(3,3),(0.1,0.7),.PIECEWISE_BEZIER_KNOTS.);+#589 = CARTESIAN_POINT('',(0.,0.1));+#590 = CARTESIAN_POINT('',(0.,0.4));+#591 = CARTESIAN_POINT('',(0.,0.7));+#592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#593 = ORIENTED_EDGE('',*,*,#594,.F.);+#594 = EDGE_CURVE('',#595,#567,#597,.T.);+#595 = VERTEX_POINT('',#596);+#596 = CARTESIAN_POINT('',(0.5,0.4,0.235));+#597 = SURFACE_CURVE('',#598,(#601,#607),.PCURVE_S1.);+#598 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#599,#600),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.1),.PIECEWISE_BEZIER_KNOTS.);+#599 = CARTESIAN_POINT('',(0.5,0.4,0.235));+#600 = CARTESIAN_POINT('',(0.5,0.3,0.235));+#601 = PCURVE('',#137,#602);+#602 = DEFINITIONAL_REPRESENTATION('',(#603),#606);+#603 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#604,#605),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.1),.PIECEWISE_BEZIER_KNOTS.);+#604 = CARTESIAN_POINT('',(0.631981012373,0.));+#605 = CARTESIAN_POINT('',(0.631981012373,-0.1));+#606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#607 = PCURVE('',#608,#613);+#608 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#609,#610)+ ,(#611,#612+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(1.27,1.495),(0.7,0.8),+ .PIECEWISE_BEZIER_KNOTS.);+#609 = CARTESIAN_POINT('',(0.5,0.3,0.235));+#610 = CARTESIAN_POINT('',(0.5,0.4,0.235));+#611 = CARTESIAN_POINT('',(0.725,0.3,0.235));+#612 = CARTESIAN_POINT('',(0.725,0.4,0.235));+#613 = DEFINITIONAL_REPRESENTATION('',(#614),#617);+#614 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#615,#616),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.1),.PIECEWISE_BEZIER_KNOTS.);+#615 = CARTESIAN_POINT('',(1.27,0.8));+#616 = CARTESIAN_POINT('',(1.27,0.7)); #617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#618 = PCURVE('',#437,#619);-#619 = DEFINITIONAL_REPRESENTATION('',(#620),#624);-#620 = LINE('',#621,#622);-#621 = CARTESIAN_POINT('',(1.27,0.8));-#622 = VECTOR('',#623,1.);-#623 = DIRECTION('',(0.,-1.));-#624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#625 = ORIENTED_EDGE('',*,*,#626,.T.);-#626 = EDGE_CURVE('',#604,#627,#629,.T.);-#627 = VERTEX_POINT('',#628);-#628 = CARTESIAN_POINT('',(0.5,0.3,0.47));-#629 = SURFACE_CURVE('',#630,(#634,#641),.PCURVE_S1.);-#630 = LINE('',#631,#632);-#631 = CARTESIAN_POINT('',(0.5,-0.4,0.47));-#632 = VECTOR('',#633,1.);-#633 = DIRECTION('',(0.,1.,0.));-#634 = PCURVE('',#145,#635);-#635 = DEFINITIONAL_REPRESENTATION('',(#636),#640);-#636 = LINE('',#637,#638);-#637 = CARTESIAN_POINT('',(0.631981012373,-0.8));-#638 = VECTOR('',#639,1.);-#639 = DIRECTION('',(0.,1.));-#640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#641 = PCURVE('',#642,#647);-#642 = CYLINDRICAL_SURFACE('',#643,3.E-02);-#643 = AXIS2_PLACEMENT_3D('',#644,#645,#646);-#644 = CARTESIAN_POINT('',(0.53,-0.4,0.47));-#645 = DIRECTION('',(0.,1.,0.));-#646 = DIRECTION('',(-1.,0.,0.));-#647 = DEFINITIONAL_REPRESENTATION('',(#648),#652);-#648 = LINE('',#649,#650);-#649 = CARTESIAN_POINT('',(0.,0.));-#650 = VECTOR('',#651,1.);-#651 = DIRECTION('',(0.,1.));+#618 = ORIENTED_EDGE('',*,*,#619,.F.);+#619 = EDGE_CURVE('',#504,#595,#620,.T.);+#620 = SURFACE_CURVE('',#621,(#624,#630),.PCURVE_S1.);+#621 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#622,#623),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#622 = CARTESIAN_POINT('',(0.45,0.4,0.55));+#623 = CARTESIAN_POINT('',(0.5,0.4,0.235));+#624 = PCURVE('',#137,#625);+#625 = DEFINITIONAL_REPRESENTATION('',(#626),#629);+#626 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#627,#628),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#627 = CARTESIAN_POINT('',(0.,0.));+#628 = CARTESIAN_POINT('',(0.631981012373,0.));+#629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#630 = PCURVE('',#285,#631);+#631 = DEFINITIONAL_REPRESENTATION('',(#632),#635);+#632 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#633,#634),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.631981012373),.PIECEWISE_BEZIER_KNOTS.);+#633 = CARTESIAN_POINT('',(0.324955871706,0.45));+#634 = CARTESIAN_POINT('',(-0.305044128294,0.5));+#635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#636 = ADVANCED_FACE('',(#637),#190,.T.);+#637 = FACE_BOUND('',#638,.T.);+#638 = EDGE_LOOP('',(#639,#664,#689,#712));+#639 = ORIENTED_EDGE('',*,*,#640,.F.);+#640 = EDGE_CURVE('',#641,#175,#643,.T.);+#641 = VERTEX_POINT('',#642);+#642 = CARTESIAN_POINT('',(-0.725,0.4,0.235));+#643 = SURFACE_CURVE('',#644,(#647,#653),.PCURVE_S1.);+#644 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#645,#646),.UNSPECIFIED.,.F.,.F.,+ (2,2),(4.5E-02,0.27),.PIECEWISE_BEZIER_KNOTS.);+#645 = CARTESIAN_POINT('',(-0.725,0.4,0.235));+#646 = CARTESIAN_POINT('',(-0.5,0.4,0.235));+#647 = PCURVE('',#190,#648);+#648 = DEFINITIONAL_REPRESENTATION('',(#649),#652);+#649 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#650,#651),.UNSPECIFIED.,.F.,.F.,+ (2,2),(4.5E-02,0.27),.PIECEWISE_BEZIER_KNOTS.);+#650 = CARTESIAN_POINT('',(4.5E-02,0.8));+#651 = CARTESIAN_POINT('',(0.27,0.8)); #652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#653 = ORIENTED_EDGE('',*,*,#654,.F.);-#654 = EDGE_CURVE('',#655,#627,#657,.T.);-#655 = VERTEX_POINT('',#656);-#656 = CARTESIAN_POINT('',(0.5,0.4,0.47));-#657 = SURFACE_CURVE('',#658,(#662,#669),.PCURVE_S1.);-#658 = LINE('',#659,#660);-#659 = CARTESIAN_POINT('',(0.5,0.4,0.47));-#660 = VECTOR('',#661,1.);-#661 = DIRECTION('',(0.,-1.,0.));-#662 = PCURVE('',#145,#663);-#663 = DEFINITIONAL_REPRESENTATION('',(#664),#668);-#664 = LINE('',#665,#666);-#665 = CARTESIAN_POINT('',(0.631981012373,0.));-#666 = VECTOR('',#667,1.);-#667 = DIRECTION('',(0.,-1.));-#668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#669 = PCURVE('',#670,#675);-#670 = PLANE('',#671);-#671 = AXIS2_PLACEMENT_3D('',#672,#673,#674);-#672 = CARTESIAN_POINT('',(-0.77,-0.4,0.47));-#673 = DIRECTION('',(0.,0.,1.));-#674 = DIRECTION('',(1.,0.,-0.));-#675 = DEFINITIONAL_REPRESENTATION('',(#676),#680);-#676 = LINE('',#677,#678);-#677 = CARTESIAN_POINT('',(1.27,0.8));-#678 = VECTOR('',#679,1.);-#679 = DIRECTION('',(0.,-1.));-#680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#681 = ORIENTED_EDGE('',*,*,#682,.F.);-#682 = EDGE_CURVE('',#555,#655,#683,.T.);-#683 = SURFACE_CURVE('',#684,(#688,#695),.PCURVE_S1.);-#684 = LINE('',#685,#686);-#685 = CARTESIAN_POINT('',(0.45,0.4,1.1));-#686 = VECTOR('',#687,1.);-#687 = DIRECTION('',(7.91163009983E-02,0.,-0.996865392576));-#688 = PCURVE('',#145,#689);-#689 = DEFINITIONAL_REPRESENTATION('',(#690),#694);-#690 = LINE('',#691,#692);-#691 = CARTESIAN_POINT('',(0.,0.));-#692 = VECTOR('',#693,1.);-#693 = DIRECTION('',(1.,0.));-#694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#695 = PCURVE('',#308,#696);-#696 = DEFINITIONAL_REPRESENTATION('',(#697),#701);-#697 = LINE('',#698,#699);-#698 = CARTESIAN_POINT('',(0.324955871706,0.45));-#699 = VECTOR('',#700,1.);-#700 = DIRECTION('',(-0.996865392576,7.91163009983E-02));-#701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#702 = ADVANCED_FACE('',(#703),#204,.T.);-#703 = FACE_BOUND('',#704,.T.);-#704 = EDGE_LOOP('',(#705,#733,#761,#787));-#705 = ORIENTED_EDGE('',*,*,#706,.F.);-#706 = EDGE_CURVE('',#707,#187,#709,.T.);-#707 = VERTEX_POINT('',#708);-#708 = CARTESIAN_POINT('',(-0.725,0.4,0.47));-#709 = SURFACE_CURVE('',#710,(#714,#721),.PCURVE_S1.);-#710 = LINE('',#711,#712);-#711 = CARTESIAN_POINT('',(-0.77,0.4,0.47));-#712 = VECTOR('',#713,1.);-#713 = DIRECTION('',(1.,0.,0.));-#714 = PCURVE('',#204,#715);-#715 = DEFINITIONAL_REPRESENTATION('',(#716),#720);-#716 = LINE('',#717,#718);-#717 = CARTESIAN_POINT('',(0.,0.8));-#718 = VECTOR('',#719,1.);-#719 = DIRECTION('',(1.,0.));-#720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#721 = PCURVE('',#722,#727);-#722 = PLANE('',#723);-#723 = AXIS2_PLACEMENT_3D('',#724,#725,#726);-#724 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02));-#725 = DIRECTION('',(0.,1.,0.));-#726 = DIRECTION('',(0.,-0.,1.));-#727 = DEFINITIONAL_REPRESENTATION('',(#728),#732);-#728 = LINE('',#729,#730);-#729 = CARTESIAN_POINT('',(0.44,0.));-#730 = VECTOR('',#731,1.);-#731 = DIRECTION('',(0.,1.));-#732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#733 = ORIENTED_EDGE('',*,*,#734,.F.);-#734 = EDGE_CURVE('',#735,#707,#737,.T.);-#735 = VERTEX_POINT('',#736);-#736 = CARTESIAN_POINT('',(-0.725,0.3,0.47));-#737 = SURFACE_CURVE('',#738,(#742,#749),.PCURVE_S1.);-#738 = LINE('',#739,#740);-#739 = CARTESIAN_POINT('',(-0.725,5.E-02,0.47));-#740 = VECTOR('',#741,1.);-#741 = DIRECTION('',(0.,1.,0.));-#742 = PCURVE('',#204,#743);-#743 = DEFINITIONAL_REPRESENTATION('',(#744),#748);-#744 = LINE('',#745,#746);-#745 = CARTESIAN_POINT('',(4.5E-02,0.45));-#746 = VECTOR('',#747,1.);-#747 = DIRECTION('',(0.,1.));-#748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#749 = PCURVE('',#750,#755);-#750 = PLANE('',#751);-#751 = AXIS2_PLACEMENT_3D('',#752,#753,#754);-#752 = CARTESIAN_POINT('',(-0.725,0.5,0.75));-#753 = DIRECTION('',(-1.,0.,0.));-#754 = DIRECTION('',(0.,-1.,0.));-#755 = DEFINITIONAL_REPRESENTATION('',(#756),#760);-#756 = LINE('',#757,#758);-#757 = CARTESIAN_POINT('',(0.45,-0.28));-#758 = VECTOR('',#759,1.);-#759 = DIRECTION('',(-1.,0.));-#760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#761 = ORIENTED_EDGE('',*,*,#762,.F.);-#762 = EDGE_CURVE('',#189,#735,#763,.T.);-#763 = SURFACE_CURVE('',#764,(#768,#775),.PCURVE_S1.);-#764 = LINE('',#765,#766);-#765 = CARTESIAN_POINT('',(-0.7475,0.3,0.47));-#766 = VECTOR('',#767,1.);-#767 = DIRECTION('',(-1.,0.,0.));-#768 = PCURVE('',#204,#769);-#769 = DEFINITIONAL_REPRESENTATION('',(#770),#774);-#770 = LINE('',#771,#772);-#771 = CARTESIAN_POINT('',(2.25E-02,0.7));-#772 = VECTOR('',#773,1.);-#773 = DIRECTION('',(-1.,0.));-#774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#775 = PCURVE('',#776,#781);-#776 = PLANE('',#777);-#777 = AXIS2_PLACEMENT_3D('',#778,#779,#780);-#778 = CARTESIAN_POINT('',(-0.725,0.3,0.75));-#779 = DIRECTION('',(0.,-1.,0.));-#780 = DIRECTION('',(1.,0.,0.));-#781 = DEFINITIONAL_REPRESENTATION('',(#782),#786);-#782 = LINE('',#783,#784);-#783 = CARTESIAN_POINT('',(-2.25E-02,-0.28));-#784 = VECTOR('',#785,1.);-#785 = DIRECTION('',(-1.,0.));-#786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#787 = ORIENTED_EDGE('',*,*,#186,.F.);-#788 = ADVANCED_FACE('',(#789),#308,.T.);-#789 = FACE_BOUND('',#790,.T.);-#790 = EDGE_LOOP('',(#791,#792,#793,#794));-#791 = ORIENTED_EDGE('',*,*,#294,.T.);-#792 = ORIENTED_EDGE('',*,*,#577,.T.);-#793 = ORIENTED_EDGE('',*,*,#682,.T.);-#794 = ORIENTED_EDGE('',*,*,#795,.T.);-#795 = EDGE_CURVE('',#655,#187,#796,.T.);-#796 = SURFACE_CURVE('',#797,(#801,#808),.PCURVE_S1.);-#797 = LINE('',#798,#799);-#798 = CARTESIAN_POINT('',(0.5,0.4,0.47));-#799 = VECTOR('',#800,1.);-#800 = DIRECTION('',(-1.,0.,0.));-#801 = PCURVE('',#308,#802);-#802 = DEFINITIONAL_REPRESENTATION('',(#803),#807);-#803 = LINE('',#804,#805);-#804 = CARTESIAN_POINT('',(-0.305044128294,0.5));-#805 = VECTOR('',#806,1.);-#806 = DIRECTION('',(0.,-1.));-#807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#808 = PCURVE('',#722,#809);+#653 = PCURVE('',#654,#659);+#654 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#655,#656)+ ,(#657,#658+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.44),(0.,1.54),+ .PIECEWISE_BEZIER_KNOTS.);+#655 = CARTESIAN_POINT('',(-0.77,0.4,1.5E-02));+#656 = CARTESIAN_POINT('',(0.77,0.4,1.5E-02));+#657 = CARTESIAN_POINT('',(-0.77,0.4,0.235));+#658 = CARTESIAN_POINT('',(0.77,0.4,0.235));+#659 = DEFINITIONAL_REPRESENTATION('',(#660),#663);+#660 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#661,#662),.UNSPECIFIED.,.F.,.F.,+ (2,2),(4.5E-02,0.27),.PIECEWISE_BEZIER_KNOTS.);+#661 = CARTESIAN_POINT('',(0.44,4.5E-02));+#662 = CARTESIAN_POINT('',(0.44,0.27));+#663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#664 = ORIENTED_EDGE('',*,*,#665,.F.);+#665 = EDGE_CURVE('',#666,#641,#668,.T.);+#666 = VERTEX_POINT('',#667);+#667 = CARTESIAN_POINT('',(-0.725,0.3,0.235));+#668 = SURFACE_CURVE('',#669,(#672,#678),.PCURVE_S1.);+#669 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#670,#671),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.25,0.35),.PIECEWISE_BEZIER_KNOTS.);+#670 = CARTESIAN_POINT('',(-0.725,0.3,0.235));+#671 = CARTESIAN_POINT('',(-0.725,0.4,0.235));+#672 = PCURVE('',#190,#673);+#673 = DEFINITIONAL_REPRESENTATION('',(#674),#677);+#674 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#675,#676),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.25,0.35),.PIECEWISE_BEZIER_KNOTS.);+#675 = CARTESIAN_POINT('',(4.5E-02,0.7));+#676 = CARTESIAN_POINT('',(4.5E-02,0.8));+#677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#678 = PCURVE('',#679,#684);+#679 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#680,#681)+ ,(#682,#683+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.1,0.2),(-0.28,-0.25),+ .PIECEWISE_BEZIER_KNOTS.);+#680 = CARTESIAN_POINT('',(-0.725,0.4,0.235));