by cosmiic
The COSMIIC implantables project as a ready-to-open Adom 3D editor layout (wireBender). Three eval frame molecules (PG4 pulse generator, PM1 power module, BP2 biopotential amplifier) sit on 6x6 scaffolds chained over the two-wire implant network bus, next to a 5x10 scaffold carrying the COSMOCOIL wireless charger, the PM charging coil, four adipose spacer molecules, and a wireless link. Installing places wireBender.json into project-content/layouts so the Hydrogen 3D editor lists it in its layou
← Commit history
README.mdadded+75@@ -0,0 +1,75 @@+# COSMIIC Implantables++The COSMIIC implantables project, captured as an Adom 3D editor layout named+wireBender. It places every COSMIIC eval module on Adom scaffolds and wires+the implant network between them, so anyone picking up COSMIIC work can see+the whole system, module by module, wire by wire, before touching a board.++Install it and the layout shows up in the Hydrogen 3D editor's layout picker.+Every molecule in the scene is a declared dependency of this package, so the+complete COSMIIC kit installs alongside it.++## Install++```+adom-wiki pkg install cosmiic/implantables+```++The install copies `wireBender.json` into+`$HOME/project/project-content/layouts/`, which is the folder the 3D editor+scans for layouts. Open the 3D Editor panel in Hydrogen and pick `wireBender`+from the layout picker, or just ask the AI:++> "open the cosmiic implantables layout in the 3D editor"++## The scene++++The bench splits into two halves:++The **network column** (left) stacks three 6x6 scaffolds, each carrying one+COSMIIC eval frame molecule: the PG4 pulse generator at the top, the PM1 power+module in the middle, and the BP2 biopotential amplifier at the bottom. BUSA+and BUSB wire pairs chain PG4 to PM1 and PM1 to BP2, mirroring the two-wire+CAN-based implant network that connects COSMIIC modules in the body. A+wireless link module sits beside the column, and two further wires run from+PM1 to the control panel contacts X74 and X71.++++The **charging cluster** (right) sits on a 5x10 scaffold: the COSMOCOIL+wireless charger, the PM charging coil wired to PM1's X1/X2 coil contacts,+and four adipose spacer molecules that stand in for tissue between coil and+module during charging tests.++++## Bill of molecules++14 instances of 9 molecules, every one a dependency of this package:++| Molecule | Qty | Role |+|---|---|---|+| [pg4-frame-mol](https://wiki.adom.inc/cosmiic/pg4-frame-mol) | 1 | PG4 pulse generator eval frame |+| [pm1-frame-mol-refined](https://wiki.adom.inc/cosmiic/pm1-frame-mol-refined) | 1 | PM1 power module eval frame |+| [bp2-frame-mol](https://wiki.adom.inc/cosmiic/bp2-frame-mol) | 1 | BP2 biopotential amplifier eval frame |+| [lrg-lrg-6x6-p16](https://wiki.adom.inc/cosmiic/lrg-lrg-6x6-p16) | 3 | 6x6 scaffolds under the network column |+| [lrg-lrg-5x10-p16](https://wiki.adom.inc/cosmiic/lrg-lrg-5x10-p16) | 1 | 5x10 scaffold under the charging cluster |+| [cosmocoil-mol](https://wiki.adom.inc/cosmiic/cosmocoil-mol) | 1 | COSMOCOIL wireless charger |+| [pm-coil-molecule](https://wiki.adom.inc/cosmiic/pm-coil-molecule) | 1 | PM charging coil |+| [adipose-molecule](https://wiki.adom.inc/cosmiic/adipose-molecule) | 4 | Tissue-equivalent spacers |+| [wireless-link](https://wiki.adom.inc/cosmiic/wireless-link) | 1 | Wireless link module |++The 8 wires are all 24 AWG: two BUSA/BUSB pairs for the network chain, the+X1/X2 coil pair between the PM coil and PM1, and the two control panel runs.++## Files++- `wireBender.json`: the layout itself (molecules and wires, editable with the+ adom-layouts spec or straight from the 3D editor).+- `install.sh` / `uninstall.sh`: copy the layout into+ `project-content/layouts/` and remove it again. Both preserve local edits:+ install backs up a modified copy to `wireBender.json.bak`, uninstall leaves+ a modified file in place.+- `SKILL.md`: teaches the AI to open and explain the layout.
page.jsonadded+62@@ -0,0 +1,62 @@+{+ "slug": "implantables",+ "title": "COSMIIC Implantables",+ "type": "app",+ "version": "1.0.0",+ "description": "The COSMIIC implantables project as a ready-to-open Adom 3D editor layout (wireBender). Three eval frame molecules (PG4 pulse generator, PM1 power module, BP2 biopotential amplifier) sit on 6x6 scaffolds chained over the two-wire implant network bus, next to a 5x10 scaffold carrying the COSMOCOIL wireless charger, the PM charging coil, four adipose spacer molecules, and a wireless link. Installing places wireBender.json into project-content/layouts so the Hydrogen 3D editor lists it in its layout picker, and every molecule in the scene is a declared dependency, so the whole COSMIIC kit comes with it.",+ "tags": [+ "cosmiic",+ "layout",+ "3d-editor",+ "implantable",+ "neurostim",+ "firmware"+ ],+ "dependencies": {+ "cosmiic/lrg-lrg-6x6-p16": "^1.0.0",+ "cosmiic/lrg-lrg-5x10-p16": "^1.0.0",+ "cosmiic/pg4-frame-mol": "^1.0.0",+ "cosmiic/pm1-frame-mol-refined": "^1.0.0",+ "cosmiic/bp2-frame-mol": "^1.0.0",+ "cosmiic/wireless-link": "^1.0.0",+ "cosmiic/cosmocoil-mol": "^1.0.0",+ "cosmiic/adipose-molecule": "^1.0.0",+ "cosmiic/pm-coil-molecule": "^1.0.0"+ },+ "discovery_triggers": [+ "cosmiic implantables",+ "open the cosmiic implantables layout",+ "cosmiic implant network layout",+ "load the cosmiic layout in the 3d editor",+ "show the cosmiic implantables in 3d",+ "open the wirebender layout"+ ],+ "discovery_pitch": "Install and open the COSMIIC implantables project layout (wireBender) in the Hydrogen 3D editor, with every COSMIIC molecule it uses pulled in as a dependency.",+ "sample_prompts": [+ {+ "label": "Open the layout",+ "prompt": "open the cosmiic implantables layout in the 3D editor"+ },+ {+ "label": "Install the project",+ "prompt": "install the cosmiic implantables layout and show it in 3D"+ },+ {+ "label": "Explore the network",+ "prompt": "walk me through the COSMIIC modules and wiring in the implantables layout"+ }+ ],+ "scripts": {+ "install": "./install.sh",+ "uninstall": "./uninstall.sh"+ },+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "org": "cosmiic",+ "author": {+ "name": "Colby Knox",+ "email": "[email protected]"+ }+}