IN-S63BTR

Inolux Corporation · Red · 0603 · LED
Top View SMD LED · 0603 (1.6 × 0.8 mm) · AlInGaP

Interactive 3D viewer

Interactive assembly view on the Adom 3D viewer with Static and Pick & Place modes. In Pick & Place the nozzle lifts an LED straight out of a datasheet-accurate carrier tape, rotates it to the board orientation, and seats it on the pads. Use Layers to toggle the board, pads, solder, silk, the LED body, LED_lit (red emitter on/off), and the FOV cone.

Characterization

View full characterization page →

Interactive specs, footprint viewer, symbol viewer, and design charts.

Provenance — 3D assembly. IN-S63BTR.glb is a composite built from the page's own IN-S63BTR.step (via cadquery for the sunken side embossing) plus a generated FR4 board, copper pads, solder, and silk mark. The top lens is tinted red with a toggleable emissive LED_lit layer. The insert animation is baked into the GLB.

Downloads

File	Description
IN-S63BTR.html	Characterization Page
IN-S63BTR.kicad_sym	KiCad Symbol
IN-S63BTR.kicad_mod	KiCad Footprint
IN-S63BTR.step	3D STEP Model