<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.6.2">
<drawing>
<library>
<description>ST Debug Connector, standard ARM Cortex-M SWD and JTAG interface plus UART</description>
<packages>
<package name="Conn_ST_STDC14">
  <description>Conn_ST_STDC14</description>
</package>
</packages>
<symbols>
<symbol name="Conn_ST_STDC14">
  <pin name="NC" direction="io"/>
  <pin name="NC@2" direction="io"/>
  <pin name="GNDDetect" direction="pas"/>
  <pin name="VCC" direction="pwr"/>
  <pin name="GND" direction="pwr"/>
  <pin name="GND@2" direction="pas"/>
  <pin name="~{RST}" direction="oc"/>
  <pin name="JCLK/SWCLK" direction="out"/>
  <pin name="JTMS/SWDIO" direction="io"/>
  <pin name="JTDO/SWO" direction="in"/>
  <pin name="JTDI/NC" direction="out"/>
  <pin name="JRCLK/NC" direction="in"/>
  <pin name="VCP_RX" direction="out"/>
  <pin name="VCP_TX" direction="in"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="Conn_ST_STDC14" prefix="J">
  <description>ST Debug Connector, standard ARM Cortex-M SWD and JTAG interface plus UART</description>
  <gates>
    <gate name="G$1" symbol="Conn_ST_STDC14"/>
  </gates>
  <devices>
    <device name="" package="Conn_ST_STDC14">
      <connects>
        <connect gate="G$1" pin="NC" pad="1"/>
        <connect gate="G$1" pin="NC@2" pad="2"/>
        <connect gate="G$1" pin="GNDDetect" pad="11"/>
        <connect gate="G$1" pin="VCC" pad="3"/>
        <connect gate="G$1" pin="GND" pad="5"/>
        <connect gate="G$1" pin="GND@2" pad="7"/>
        <connect gate="G$1" pin="~{RST}" pad="12"/>
        <connect gate="G$1" pin="JCLK/SWCLK" pad="6"/>
        <connect gate="G$1" pin="JTMS/SWDIO" pad="4"/>
        <connect gate="G$1" pin="JTDO/SWO" pad="8"/>
        <connect gate="G$1" pin="JTDI/NC" pad="10"/>
        <connect gate="G$1" pin="JRCLK/NC" pad="9"/>
        <connect gate="G$1" pin="VCP_RX" pad="13"/>
        <connect gate="G$1" pin="VCP_TX" pad="14"/>
      </connects>
      <technologies><technology name=""/></technologies>
    </device>
  </devices>
</deviceset>
</devicesets>
</library>
</drawing>
</eagle>